Hang on boot after upgrade to kernel 2.6.31 [SOLVED]

hey all,
My system hangs after installing 2.6.31. the message is this:
pci 0000:00:00.0: BAR 3: address space collision on of device [0xe0000000-0xffffffff]
i tried 2.6.30, but compiz was too slow, so i went back to 2.6.29. dmesg:
Linux version 2.6.29-ARCH (root@T-POWA-LX) (gcc version 4.4.0 (GCC) ) #1 SMP PREEMPT Wed May 20 07:06:02 UTC 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cfda0000 (usable)
BIOS-e820: 00000000cfda0000 - 00000000cfdae000 (ACPI data)
BIOS-e820: 00000000cfdae000 - 00000000cfdf0000 (ACPI NVS)
BIOS-e820: 00000000cfdf0000 - 00000000cff00000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
DMI present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
last_pfn = 0xcfda0 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009f000 (usable)
modified: 000000000009f000 - 00000000000a0000 (reserved)
modified: 00000000000e6000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 00000000cfda0000 (usable)
modified: 00000000cfda0000 - 00000000cfdae000 (ACPI data)
modified: 00000000cfdae000 - 00000000cfdf0000 (ACPI NVS)
modified: 00000000cfdf0000 - 00000000cff00000 (reserved)
modified: 00000000fff00000 - 0000000100000000 (reserved)
modified: 0000000100000000 - 0000000130000000 (usable)
kernel direct mapping tables up to 377fe000 @ 10000-15000
RAMDISK: 7fbab000 - 7ffef415
Allocated new RAMDISK: 005a6000 - 009ea415
Move RAMDISK from 000000007fbab000 - 000000007ffef414 to 005a6000 - 009ea414
ACPI: RSDP 000F9410, 0014 (r0 ACPIAM)
ACPI: RSDT CFDA0000, 003C (r1 7577MS A7577100 20090427 MSFT 97)
ACPI: FACP CFDA0200, 0084 (r1 7577MS A7577100 20090427 MSFT 97)
ACPI Warning (tbfadt-0596): Optional field Pm2ControlBlock has zero address or length: 0000000000000000/1 [20081204]
FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
ACPI: DSDT CFDA0440, A216 (r1 A7577 A7577100 100 INTL 20051117)
ACPI: FACS CFDAE000, 0040
ACPI: APIC CFDA0390, 006C (r1 7577MS A7577100 20090427 MSFT 97)
ACPI: MCFG CFDA0400, 003C (r1 7577MS OEMMCFG 20090427 MSFT 97)
ACPI: OEMB CFDAE040, 0072 (r1 7577MS A7577100 20090427 MSFT 97)
ACPI: HPET CFDAA660, 0038 (r1 7577MS OEMHPET 20090427 MSFT 97)
ACPI: SSDT CFDAA6A0, 088C (r1 A M I POWERNOW 1 AMD 1)
ACPI: Local APIC address 0xfee00000
2437MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 00000000 - 377fe000
bootmap 00011000 - 00017f00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 00005a2604] TEXT DATA BSS ==> [0000100000 - 00005a2604]
#4 [00005a3000 - 00005a6000] INIT_PG_TABLE ==> [00005a3000 - 00005a6000]
#5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
#6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
#7 [00005a6000 - 00009ea415] NEW RAMDISK ==> [00005a6000 - 00009ea415]
#8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
found SMP MP-table at [c00ff780] 000ff780
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x000cfda0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000cfda0
On node 0 totalpages: 851247
free_area_init_node: node 0, pgdat c0430600, node_mem_map c1000200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 4876 pages used for memmap
HighMem zone: 619158 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8300 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
Allocating PCI resources starting at d0000000 (gap: cff00000:30000000)
NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Allocating 36864 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 844595
Kernel command line: root=/dev/disk/by-uuid/deebdc30-3ac7-4de2-81d2-eb4d199468b9 ro quiet vga=792 splash
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Fast TSC calibration using PIT
Detected 3214.713 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 3367428k/3405440k available (2363k kernel code, 36780k reserved, 1059k data, 340k init, 2496136k highmem)
virtual kernel memory layout:
fixmap : 0xffee8000 - 0xfffff000 (1116 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc045d000 - 0xc04b2000 ( 340 kB)
.data : 0xc034ec74 - 0xc0457a88 (1059 kB)
.text : 0xc0100000 - 0xc034ec74 (2363 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
hpet clockevent registered
HPET: 4 timers in total, 1 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 6431.31 BogoMIPS (lpj=10715710)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using C1E aware idle routine
Checking 'hlt' instruction... OK.
ACPI: Core revision 20081204
ACPI: Checking initramfs for custom DSDT
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Phenom(tm) II X4 955 Processor stepping 02
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 6431.80 BogoMIPS (lpj=10714888)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: AMD Phenom(tm) II X4 955 Processor stepping 02
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
System has AMD C1E enabled
Switch to broadcast mode on CPU1
Booting processor 2 APIC 0x2 ip 0x6000
Initializing CPU#2
Calibrating delay using timer specific routine.. 6431.79 BogoMIPS (lpj=10714876)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#2.
x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
CPU2: AMD Phenom(tm) II X4 955 Processor stepping 02
checking TSC synchronization [CPU#0 -> CPU#2]: passed.
Switch to broadcast mode on CPU2
Booting processor 3 APIC 0x3 ip 0x6000
Initializing CPU#3
Calibrating delay using timer specific routine.. 6431.80 BogoMIPS (lpj=10714888)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#3.
x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
CPU3: AMD Phenom(tm) II X4 955 Processor stepping 02
checking TSC synchronization [CPU#0 -> CPU#3]: passed.
Brought up 4 CPUs
Total of 4 processors activated (25726.72 BogoMIPS).
Switch to broadcast mode on CPU3
Switch to broadcast mode on CPU0
net_namespace: 1016 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=6
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff]
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:11.0: reg 10 io port: [0x8000-0x8007]
pci 0000:00:11.0: reg 14 io port: [0x7000-0x7003]
pci 0000:00:11.0: reg 18 io port: [0x6000-0x6007]
pci 0000:00:11.0: reg 1c io port: [0x5000-0x5003]
pci 0000:00:11.0: reg 20 io port: [0x3000-0x300f]
pci 0000:00:11.0: reg 24 32bit mmio: [0xf9fffc00-0xf9ffffff]
pci 0000:00:11.0: set SATA to AHCI mode
pci 0000:00:12.0: reg 10 32bit mmio: [0xf9ffe000-0xf9ffefff]
pci 0000:00:12.1: reg 10 32bit mmio: [0xf9ffd000-0xf9ffdfff]
pci 0000:00:12.2: reg 10 32bit mmio: [0xf9fff800-0xf9fff8ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: PME# disabled
pci 0000:00:13.0: reg 10 32bit mmio: [0xf9ffc000-0xf9ffcfff]
pci 0000:00:13.1: reg 10 32bit mmio: [0xf9ffb000-0xf9ffbfff]
pci 0000:00:13.2: reg 10 32bit mmio: [0xf9fff400-0xf9fff4ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: PME# disabled
pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
pci 0000:00:14.1: reg 20 io port: [0xff00-0xff0f]
pci 0000:00:14.2: reg 10 64bit mmio: [0xf9ff4000-0xf9ff7fff]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: PME# disabled
pci 0000:00:14.5: reg 10 32bit mmio: [0xf9ffa000-0xf9ffafff]
pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
pci 0000:01:00.0: reg 1c 64bit mmio: [0xfa000000-0xfbffffff]
pci 0000:01:00.0: reg 24 io port: [0x9800-0x987f]
pci 0000:01:00.0: reg 30 32bit mmio: [0xfe7e0000-0xfe7fffff]
pci 0000:00:02.0: bridge io port: [0x9000-0x9fff]
pci 0000:00:02.0: bridge 32bit mmio: [0xfa000000-0xfe7fffff]
pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:02:00.0: reg 10 io port: [0xa800-0xa8ff]
pci 0000:02:00.0: reg 18 64bit mmio: [0xf8eff000-0xf8efffff]
pci 0000:02:00.0: reg 20 64bit mmio: [0xf8ef8000-0xf8efbfff]
pci 0000:02:00.0: reg 30 32bit mmio: [0xfe8e0000-0xfe8fffff]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:05.0: bridge io port: [0xa000-0xafff]
pci 0000:00:05.0: bridge 32bit mmio: [0xfe800000-0xfe8fffff]
pci 0000:00:05.0: bridge 64bit mmio pref: [0xf8e00000-0xf8efffff]
pci 0000:03:00.0: reg 10 io port: [0xb800-0xb8ff]
pci 0000:03:00.0: reg 18 64bit mmio: [0xf8fff000-0xf8ffffff]
pci 0000:03:00.0: reg 20 64bit mmio: [0xf8ff8000-0xf8ffbfff]
pci 0000:03:00.0: reg 30 32bit mmio: [0xfe9e0000-0xfe9fffff]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:06.0: bridge io port: [0xb000-0xbfff]
pci 0000:00:06.0: bridge 32bit mmio: [0xfe900000-0xfe9fffff]
pci 0000:00:06.0: bridge 64bit mmio pref: [0xf8f00000-0xf8ffffff]
pci 0000:04:00.0: reg 10 64bit mmio: [0xfeaff800-0xfeafffff]
pci 0000:04:00.0: reg 18 io port: [0xc800-0xc8ff]
pci 0000:04:00.0: supports D2
pci 0000:04:00.0: PME# supported from D2 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:07.0: bridge io port: [0xc000-0xcfff]
pci 0000:00:07.0: bridge 32bit mmio: [0xfea00000-0xfeafffff]
pci 0000:05:00.0: reg 24 32bit mmio: [0xfebfe000-0xfebfffff]
pci 0000:05:00.0: PME# supported from D3hot
pci 0000:05:00.0: PME# disabled
pci 0000:05:00.1: reg 10 io port: [0xe800-0xe807]
pci 0000:05:00.1: reg 14 io port: [0xe400-0xe403]
pci 0000:05:00.1: reg 18 io port: [0xe000-0xe007]
pci 0000:05:00.1: reg 1c io port: [0xd800-0xd803]
pci 0000:05:00.1: reg 20 io port: [0xd400-0xd40f]
pci 0000:00:09.0: bridge io port: [0xd000-0xefff]
pci 0000:00:09.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
pci 0000:00:14.4: transparent bridge
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI Warning (tbutils-0242): Incorrect checksum in table [OEMB] - 47, should be 46 [20081204]
PCI: Using ACPI for IRQ routing
pci 0000:00:00.0: BAR 3: can't allocate resource
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet: hpet2 irq 24 for MSI
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:0d: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp 00:0d: mem resource (0xc0000-0xcffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp 00:0d: mem resource (0xe0000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp 00:0d: mem resource (0x100000-0xcfefffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
system 00:0a: ioport range 0x40b-0x40b has been reserved
system 00:0a: ioport range 0x4d6-0x4d6 has been reserved
system 00:0a: ioport range 0xc00-0xc01 has been reserved
system 00:0a: ioport range 0xc14-0xc14 has been reserved
system 00:0a: ioport range 0xc50-0xc51 has been reserved
system 00:0a: ioport range 0xc52-0xc52 has been reserved
system 00:0a: ioport range 0xc6c-0xc6c has been reserved
system 00:0a: ioport range 0xc6f-0xc6f has been reserved
system 00:0a: ioport range 0xcd0-0xcd1 has been reserved
system 00:0a: ioport range 0xcd2-0xcd3 has been reserved
system 00:0a: ioport range 0xcd4-0xcd5 has been reserved
system 00:0a: ioport range 0xcd6-0xcd7 has been reserved
system 00:0a: ioport range 0xcd8-0xcdf has been reserved
system 00:0a: ioport range 0x800-0x89f has been reserved
system 00:0a: ioport range 0xb00-0xb0f has been reserved
system 00:0a: ioport range 0xb20-0xb3f has been reserved
system 00:0a: ioport range 0x900-0x90f has been reserved
system 00:0a: ioport range 0x910-0x91f has been reserved
system 00:0a: ioport range 0xfe00-0xfefe has been reserved
system 00:0a: iomem range 0xffb80000-0xffbfffff has been reserved
system 00:0a: iomem range 0xfec10000-0xfec1001f has been reserved
system 00:0b: ioport range 0x600-0x6df has been reserved
system 00:0b: ioport range 0x6e0-0x6ef has been reserved
system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0d: iomem range 0xfec00000-0xffffffff could not be reserved
Switched to high resolution mode on CPU 3
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 2
Switched to high resolution mode on CPU 0
pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
pci 0000:00:02.0: IO window: 0x9000-0x9fff
pci 0000:00:02.0: MEM window: 0xfa000000-0xfe7fffff
pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci 0000:00:05.0: PCI bridge, secondary bus 0000:02
pci 0000:00:05.0: IO window: 0xa000-0xafff
pci 0000:00:05.0: MEM window: 0xfe800000-0xfe8fffff
pci 0000:00:05.0: PREFETCH window: 0x000000f8e00000-0x000000f8efffff
pci 0000:00:06.0: PCI bridge, secondary bus 0000:03
pci 0000:00:06.0: IO window: 0xb000-0xbfff
pci 0000:00:06.0: MEM window: 0xfe900000-0xfe9fffff
pci 0000:00:06.0: PREFETCH window: 0x000000f8f00000-0x000000f8ffffff
pci 0000:00:07.0: PCI bridge, secondary bus 0000:04
pci 0000:00:07.0: IO window: 0xc000-0xcfff
pci 0000:00:07.0: MEM window: 0xfea00000-0xfeafffff
pci 0000:00:07.0: PREFETCH window: disabled
pci 0000:00:09.0: PCI bridge, secondary bus 0000:05
pci 0000:00:09.0: IO window: 0xd000-0xefff
pci 0000:00:09.0: MEM window: 0xfeb00000-0xfebfffff
pci 0000:00:09.0: PREFETCH window: disabled
pci 0000:00:14.4: PCI bridge, secondary bus 0000:06
pci 0000:00:14.4: IO window: disabled
pci 0000:00:14.4: MEM window: disabled
pci 0000:00:14.4: PREFETCH window: disabled
pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:05.0: setting latency timer to 64
pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:06.0: setting latency timer to 64
pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:07.0: setting latency timer to 64
pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:09.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 io: [0x9000-0x9fff]
pci_bus 0000:01: resource 1 mem: [0xfa000000-0xfe7fffff]
pci_bus 0000:01: resource 2 mem: [0xd0000000-0xdfffffff]
pci_bus 0000:01: resource 3 mem: [0x0-0x0]
pci_bus 0000:02: resource 0 io: [0xa000-0xafff]
pci_bus 0000:02: resource 1 mem: [0xfe800000-0xfe8fffff]
pci_bus 0000:02: resource 2 mem: [0xf8e00000-0xf8efffff]
pci_bus 0000:02: resource 3 mem: [0x0-0x0]
pci_bus 0000:03: resource 0 io: [0xb000-0xbfff]
pci_bus 0000:03: resource 1 mem: [0xfe900000-0xfe9fffff]
pci_bus 0000:03: resource 2 mem: [0xf8f00000-0xf8ffffff]
pci_bus 0000:03: resource 3 mem: [0x0-0x0]
pci_bus 0000:04: resource 0 io: [0xc000-0xcfff]
pci_bus 0000:04: resource 1 mem: [0xfea00000-0xfeafffff]
pci_bus 0000:04: resource 2 mem: [0x0-0x0]
pci_bus 0000:04: resource 3 mem: [0x0-0x0]
pci_bus 0000:05: resource 0 io: [0xd000-0xefff]
pci_bus 0000:05: resource 1 mem: [0xfeb00000-0xfebfffff]
pci_bus 0000:05: resource 2 mem: [0x0-0x0]
pci_bus 0000:05: resource 3 mem: [0x0-0x0]
pci_bus 0000:06: resource 0 mem: [0x0-0x0]
pci_bus 0000:06: resource 1 mem: [0x0-0x0]
pci_bus 0000:06: resource 2 mem: [0x0-0x0]
pci_bus 0000:06: resource 3 io: [0x00-0xffff]
pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs... done
Freeing initrd memory: 4369k freed
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1252627399.657:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1711
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:02.0: setting latency timer to 64
pcieport-driver 0000:00:02.0: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:05.0: setting latency timer to 64
pcieport-driver 0000:00:05.0: irq 26 for MSI/MSI-X
pcieport-driver 0000:00:06.0: setting latency timer to 64
pcieport-driver 0000:00:06.0: irq 27 for MSI/MSI-X
pcieport-driver 0000:00:07.0: setting latency timer to 64
pcieport-driver 0000:00:07.0: irq 28 for MSI/MSI-X
pcieport-driver 0000:00:09.0: setting latency timer to 64
pcieport-driver 0000:00:09.0: irq 29 for MSI/MSI-X
vesafb: framebuffer at 0xfb000000, mapped to 0xf8080000, using 6144k, total 14336k
vesafb: mode is 1024x768x32, linelength=4096, pages=1
vesafb: protected mode interface info at c000:b2e0
vesafb: pmi: set display start = c00cb343, set palette = c00cb39e
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:PSKE,PNP0f03:PSMS] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 340k freed
SCSI subsystem initialized
libata version 3.00 loaded.
pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pata_acpi 0000:00:14.1: setting latency timer to 64
pata_acpi 0000:05:00.1: enabling device (0000 -> 0001)
pata_acpi 0000:05:00.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
pata_acpi 0000:05:00.1: setting latency timer to 64
pata_acpi 0000:05:00.1: PCI INT B disabled
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ahci 0000:00:11.0: irq 30 for MSI/MSI-X
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9fffd00 irq 30
ata2: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9fffd80 irq 30
ata3: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9fffe00 irq 30
ata4: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9fffe80 irq 30
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pata_jmicron 0000:05:00.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
pata_jmicron 0000:05:00.1: setting latency timer to 64
scsi4 : pata_jmicron
scsi5 : pata_jmicron
ata5: PATA max UDMA/100 cmd 0xe800 ctl 0xe400 bmdma 0xd400 irq 18
ata6: PATA max UDMA/100 cmd 0xe000 ctl 0xd800 bmdma 0xd408 irq 18
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: TSSTcorp CD-RW/DVD-ROM TS-H493A, D200, max UDMA/33, ATAPI AN
ata2.00: configured for UDMA/33
scsi 1:0:0:0: CD-ROM TSSTcorp CDRWDVD TS-H493A D200 PQ: 0 ANSI: 5
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATA-7: ST3500630AS, 3.AAK, max UDMA/133
ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA ST3500630AS 3.AA PQ: 0 ANSI: 5
ahci 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
scsi6 : pata_atiixp
scsi7 : pata_atiixp
ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
ahci 0000:05:00.0: setting latency timer to 64
scsi8 : ahci
scsi9 : ahci
ata9: SATA max UDMA/133 abar m8192@0xfebfe000 port 0xfebfe100 irq 17
ata10: SATA max UDMA/133 abar m8192@0xfebfe000 port 0xfebfe180 irq 17
ata9: SATA link down (SStatus 0 SControl 300)
ata8.01: ATA-7: ST3500630AS, 3.AAK, max UDMA/133
ata8.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata8.01: configured for UDMA/100
scsi 7:0:1:0: Direct-Access ATA ST3500630AS 3.AA PQ: 0 ANSI: 5
ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 17, io mem 0xf9fff800
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:12.0: irq 16, io mem 0xf9ffe000
Driver 'sd' needs updating - please use bus_type methods
sd 3:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 3:0:0:0: [sda] Attached SCSI disk
sd 7:0:1:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
sd 7:0:1:0: [sdb] Write Protect is off
sd 7:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 7:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 7:0:1:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
sd 7:0:1:0: [sdb] Write Protect is off
sd 7:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 7:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 7:0:1:0: [sdb] Attached SCSI disk
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 19, io mem 0xf9fff400
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:12.1: OHCI Host Controller
ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.1: irq 16, io mem 0xf9ffd000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 18, io mem 0xf9ffc000
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.1: irq 18, io mem 0xf9ffb000
ata10: SATA link down (SStatus 0 SControl 300)
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:14.5: irq 18, io mem 0xf9ffa000
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 8x/48x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
usb 3-2: new high speed USB device using ehci_hcd and address 3
usb 3-2: configuration #1 chosen from 1 choice
hub 3-2:1.0: USB hub found
hub 3-2:1.0: 4 ports detected
usb 5-1: new low speed USB device using ohci_hcd and address 2
usb 5-1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input1
generic-usb 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:13.0-1/input0
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
usb 3-2.4: new high speed USB device using ehci_hcd and address 4
usb 3-2.4: configuration #1 chosen from 1 choice
hub 3-2.4:1.0: USB hub found
hub 3-2.4:1.0: 4 ports detected
usb 3-2.4.1: new low speed USB device using ehci_hcd and address 5
usb 3-2.4.1: configuration #1 chosen from 1 choice
input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:13.2/usb3/3-2/3-2.4/3-2.4.1/3-2.4.1:1.0/input/input2
generic-usb 0003:045E:00DD.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:13.2-2.4.1/input0
input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:13.2/usb3/3-2/3-2.4/3-2.4.1/3-2.4.1:1.1/input/input3
generic-usb 0003:045E:00DD.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:13.2-2.4.1/input1
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
XFS mounting filesystem sda3
Ending clean XFS mount for filesystem: sda3
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
udev: starting version 146
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
r8169 0000:02:00.0: setting latency timer to 64
r8169 0000:02:00.0: irq 31 for MSI/MSI-X
eth0: RTL8168d/8111d at 0xf888c000, 00:24:21:b7:ca:4d, XID 281000c0 IRQ 31
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
r8169 0000:03:00.0: setting latency timer to 64
r8169 0000:03:00.0: irq 32 for MSI/MSI-X
eth1: RTL8168d/8111d at 0xf8696000, 00:24:21:b7:ca:4c, XID 281000c0 IRQ 32
HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
usbcore: registered new interface driver snd-usb-audio
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
ACPI: Power Button (CM) [PWRB]
processor ACPI_CPU:00: registered as cooling_device0
ACPI: Processor [P001] (supports 8 throttling states)
processor ACPI_CPU:01: registered as cooling_device1
processor ACPI_CPU:02: registered as cooling_device2
processor ACPI_CPU:03: registered as cooling_device3
sr 1:0:0:0: Attached scsi generic sg0 type 5
sd 3:0:0:0: Attached scsi generic sg1 type 0
sd 7:0:1:0: Attached scsi generic sg2 type 0
Linux agpgart interface v0.103
ohci1394 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ohci1394 0000:04:00.0: setting latency timer to 64
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[feaff800-feafffff] Max Packet=[2048] IR/IT contexts=[4/8]
input: PC Speaker as /devices/platform/pcspkr/input/input6
ACPI: I/O resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SOR1 [0xb00-0xb0f]
ACPI: Device needs an ACPI driver
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
nvidia: module license 'NVIDIA' taints kernel.
ACPI: WMI: Mapper loaded
nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
nvidia 0000:01:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86 Kernel Module 180.44 Mon Mar 23 14:59:10 PST 2009
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc0001947652]
Adding 996020k swap on /dev/sda2. Priority:-1 extents:1 across:996020k
r8169: eth0: link up
r8169: eth0: link up
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
nvclock:4989 freeing invalid memtype fd000000-fd010000
nvclock:4989 freeing invalid memtype fd010000-fd030000
nvclock:4989 freeing invalid memtype fd010000-fd030000
IRQ 18/nvidia: IRQF_DISABLED is not guaranteed on shared IRQs
eth0: no IPv6 routers present
ideas?
Last edited by pnatural (2009-09-17 19:59:58)

pnatural wrote:
hi,
I was able to install 2.6.31 by setting the motherboards E-SATA/RAID mode to "ACPI" instead of "PCI". I first tried to disable the motherboard raid completely, but the system would not boot at all that way; setting the mode to "ACPI" did the trick.
I would say thanks, but I did all the work! But thanks to the Arch folks for a great distribution.
Hi,I got the follow message,much same with you,could you tell me how to deal?thx.
Nov 3 23:00:06 ArchLinux kernel: pci 0000:00:14.2: BAR 0: address space collision on of device [0xd4408000-0xd440bfff]

Similar Messages

Hangs during boot after upgrading to Kernel 2.6.39

I have just installed Arch on a new computer. It works fine until I upgrade to Kernel 2.6.39. After that it hangs on boot.
The end of /var/log/everything.log is posted below.
Jul 26 23:52:06 localhost kernel: [ 6.036766] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table at offset 0x85F3
Jul 26 23:52:06 localhost kernel: [ 6.129046] adt7475 1-002e: ADT7473 device, revision 1
Jul 26 23:52:06 localhost kernel: [ 6.138997] [drm] nouveau 0000:04:00.0: Detected monitoring device: adt7473
Jul 26 23:52:06 localhost kernel: [ 6.139000] [drm] nouveau 0000:04:00.0: 1 available performance level(s)
Jul 26 23:52:06 localhost kernel: [ 6.139002] [drm] nouveau 0000:04:00.0: 0: memory 405MHz core 270MHz shader 540MHz
Jul 26 23:52:06 localhost kernel: [ 6.139233] [TTM] Zone kernel: Available graphics memory: 12371030 kiB.
Jul 26 23:52:06 localhost kernel: [ 6.139236] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
Jul 26 23:52:06 localhost kernel: [ 6.139238] [TTM] Initializing pool allocator.
Jul 26 23:52:06 localhost kernel: [ 6.139252] [drm] nouveau 0000:04:00.0: Detected 5376MiB VRAM
Jul 26 23:52:06 localhost kernel: [ 6.139260] mtrr: type mismatch for d0000000,8000000 old: write-back new: write-combining
Jul 26 23:52:06 localhost kernel: [ 6.150626] [drm] nouveau 0000:04:00.0: 512 MiB GART (aperture)
Jul 26 23:52:06 localhost kernel: [ 6.152371] [drm] nouveau 0000:04:00.0: failed to load fuc409d
Jul 26 23:52:06 localhost kernel: [ 6.176193] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
Jul 26 23:52:06 localhost kernel: [ 6.176195] [drm] No driver support for vblank timestamp query.
Jul 26 23:52:06 localhost kernel: [ 6.228800] No connectors reported connected with modes
Jul 26 23:52:06 localhost kernel: [ 6.228802] [drm] Cannot find any crtc or sizes - going 1024x768
Jul 26 23:52:06 localhost kernel: [ 6.231002] [drm] nouveau 0000:04:00.0: allocated 1024x768 fb: 0x8020000, bo ffff880608d97800
Jul 26 23:52:06 localhost kernel: [ 6.233786] Console: switching to colour frame buffer device 128x48
Jul 26 23:52:06 localhost kernel: [ 6.235094] fb0: nouveaufb frame buffer device
Jul 26 23:52:06 localhost kernel: [ 6.235094] drm: registered panic notifier
Jul 26 23:52:06 localhost kernel: [ 6.235098] [drm] Initialized nouveau 0.0.16 20090420 for 0000:04:00.0 on minor 0
Jul 26 23:52:06 localhost kernel: [ 6.255449] HDA Intel 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Jul 26 23:52:06 localhost kernel: [ 6.255451] hda_intel: Disable MSI for Nvidia chipset
Jul 26 23:52:06 localhost kernel: [ 6.255599] HDA Intel 0000:04:00.1: setting latency timer to 64
Jul 26 23:52:06 localhost kernel: [ 7.663482] EXT4-fs (sda3): re-mounted. Opts: (null)
Jul 26 23:52:06 localhost kernel: [ 7.807508] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
Jul 26 23:52:06 localhost kernel: [ 7.851401] Adding 265068k swap on /dev/sda2. Priority:-1 extents:1 across:265068k
Jul 26 23:52:06 localhost kernel: [ 8.569682] r8169 0000:08:00.0: eth0: link down
Jul 26 23:52:06 localhost kernel: [ 8.569687] r8169 0000:08:00.0: eth0: link down
Jul 26 23:52:06 localhost dhcpcd[747]: eth0: waiting for carrier
Jul 26 23:52:08 localhost dhcpcd[747]: eth0: carrier acquired
Jul 26 23:52:08 localhost kernel: [ 10.301736] r8169 0000:08:00.0: eth0: link up
Jul 26 23:52:08 localhost dhcpcd[747]: eth0: broadcasting for a lease
Jul 26 23:52:12 localhost dhcpcd[747]: eth0: offered 131.181.53.42 from 131.181.127.32
Jul 26 23:52:13 localhost dhcpcd[747]: eth0: acknowledged 131.181.53.42 from 131.181.59.48
Jul 26 23:52:13 localhost dhcpcd[747]: eth0: checking for 131.181.53.42
Jul 26 23:52:18 localhost dhcpcd[747]: eth0: leased 131.181.53.42 for 43200 seconds
Jul 26 23:52:18 localhost dhcpcd[747]: forked to background, child pid 774
Jul 26 23:52:18 localhost crond[823]: /usr/sbin/crond 4.5 dillon's cron daemon, started with loglevel info
Jul 26 23:53:01 localhost crond[823]: FILE /etc/cron.d/prune-cronstamps USER root PID 835 job prune-cronstamps
Jul 26 23:53:01 localhost crond[823]: FILE /var/spool/cron/root USER root PID 836 job sys-hourly
Jul 26 23:53:01 localhost crond[823]: FILE /var/spool/cron/root USER root PID 837 job sys-daily
Jul 26 23:53:01 localhost crond[823]: FILE /var/spool/cron/root USER root PID 838 job sys-weekly
Any help fixing this would be greatly appreciated.

I have been trying to isolate the problem a little further. I re-installed (with just the base and sudo) and after upgrading pacman rebooted and it worked without fail. Then I installed libusb and libusb-compat which where required when I tried to upgrade just the kernel using
pacman -S kernel26
which initially failed because of the missing dependencies libusb and libusb-compat. I then re-booted and that worked without a problem.
I then upgraded to Kernel 2.6.39 using the above command and then it hung on rebooting. I saved the logs at each stage.
The additional logs in errors.log in the reboot that failed are as follows.
ul 26 16:28:39 O313 kernel: [ 5.120698] [drm] nouveau 0000:04:00.0: Pointer to BIT loadval table invalid
Jul 26 16:28:39 O313 kernel: [ 5.360508] [drm] nouveau 0000:04:00.0: failed to load fuc409d
Jul 26 16:28:39 O313 kernel: [ 5.808016] sd 20:0:0:0: [sdb] Assuming drive cache: write through
Jul 26 16:28:39 O313 kernel: [ 5.809960] sd 20:0:0:0: [sdb] Assuming drive cache: write through
Jul 26 16:28:39 O313 kernel: [ 5.812116] sd 20:0:0:0: [sdb] Assuming drive cache: write through
Jul 26 16:28:35 O313 udevd[369]: error: runtime directory '/run/udev' not writable, for now falling back to '/dev/.udev'
The end of kernel.log is as follows:
Sat Jul 9 14:57:41 CEST 2011
Jul 26 16:28:39 O313 kernel: [ 0.000000] Command line: root=/dev/disk/by-uuid/e4733c60-3e54-4001-a83e-415b690dfcb0 ro
Jul 26 16:28:39 O313 kernel: [ 0.000000] BIOS-provided physical RAM map:
Jul 26 16:28:39 O313 kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
Jul 26 16:28:39 O313 kernel: [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
Jul 26 16:28:39 O313 kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Jul 26 16:28:39 O313 kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfed0000 (usable)
Jul 26 16:28:39 O313 kernel: [ 0.000000] BIOS-e820: 00000000cfed0000 - 00000000cfed1000 (ACPI NVS)
Jul 26 16:28:39 O313 kernel: [ 0.000000] BIOS-e820: 00000000cfed1000 - 00000000cfee0000 (ACPI data)
Jul 26 16:28:39 O313 kernel: [ 0.000000] BIOS-e820: 00000000cfee0000 - 00000000cff00000 (reserved)
Jul 26 16:28:39 O313 kernel: [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
Jul 26 16:28:39 O313 kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Jul 26 16:28:39 O313 kernel: [ 0.000000] BIOS-e820: 0000000100000000 - 0000000630000000 (usable)
Jul 26 16:28:39 O313 kernel: [ 0.000000] NX (Execute Disable) protection: active
Jul 26 16:28:39 O313 kernel: [ 0.000000] DMI 2.4 present.
Jul 26 16:28:39 O313 kernel: [ 0.000000] DMI: Gigabyte Technology Co., Ltd. X58A-UD5/X58A-UD5, BIOS FD 02/01/2011
Jul 26 16:28:39 O313 kernel: [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
Jul 26 16:28:39 O313 kernel: [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
Jul 26 16:28:39 O313 kernel: [ 0.000000] No AGP bridge found
Jul 26 16:28:39 O313 kernel: [ 0.000000] last_pfn = 0x630000 max_arch_pfn = 0x400000000
And this is the end of daemon.log
Jul 26 16:27:49 O313 init: Switching to runlevel: 6
Jul 26 16:27:50 O313 dhcpcd: received SIGTERM, stopping
Jul 26 16:27:50 O313 dhcpcd: eth0: removing interface
Jul 26 16:28:39 O313 2.352592] udevd[87]: starting version 171
Jul 26 16:28:39 O313 4.531007] udevd[370]: starting version 171
Jul 26 16:28:39 O313 dhcpcd: version 5.2.2 starting
Jul 26 16:28:39 O313 dhcpcd: eth0: waiting for carrier
Jul 26 16:28:35 O313 udevd[369]: error: runtime directory '/run/udev' not writable, for now falling back to '/dev/.udev'
Jul 26 16:28:39 O313 init: Entering runlevel: 3
Please let me know if any further information would be useful in tracking down this problem. Also ignore any timings in my initial post they were incorrect.
Last edited by TheStatsMan (2011-07-26 07:40:48)

Delay/hang on boot after upgrading to kernel 4.0.1

My laptop takes a very long time to boot and often does not even boot with kernel 4.0.1.
When the laptop does boot, my dmesg looks like this:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.0.1-1-ARCH (builduser@tobias) (gcc version 5.1.0 (GCC) ) #1 SMP PREEMPT Wed Apr 29 12:00:26 CEST 2015
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=4ba3d184-2b03-4422-ac1a-2bd40dd37cb8 rw quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000070000-0x0000000000087fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000008ccaffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008ccb0000-0x000000008e0affff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008e0b0000-0x00000000926befff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000926bf000-0x00000000928befff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000928bf000-0x0000000092ebefff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000092ebf000-0x0000000092fbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000092fbf000-0x0000000092ffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000092fff000-0x0000000092ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000093000000-0x000000009f9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff980000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by INSYDE Corp.
[ 0.000000] efi: ACPI=0x92ffe000 ACPI 2.0=0x92ffe014 SMBIOS=0x92ebef98
[ 0.000000] efi: mem00: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000000000000-0x0000000000001000) (0MB)
[ 0.000000] efi: mem01: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000001000-0x000000000006f000) (0MB)
[ 0.000000] efi: mem02: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000000006f000-0x0000000000070000) (0MB)
[ 0.000000] efi: mem03: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000070000-0x0000000000080000) (0MB)
[ 0.000000] efi: mem04: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000000080000-0x0000000000082000) (0MB)
[ 0.000000] efi: mem05: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000082000-0x0000000000088000) (0MB)
[ 0.000000] efi: mem06: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x0000000000088000-0x000000000009f000) (0MB)
[ 0.000000] efi: mem07: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000000009f000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem08: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000000100000-0x0000000000f28000) (14MB)
[ 0.000000] efi: mem09: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000f28000-0x000000003795a000) (874MB)
[ 0.000000] efi: mem10: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000003795a000-0x0000000037ca5000) (3MB)
[ 0.000000] efi: mem11: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000037ca5000-0x0000000067cab000) (768MB)
[ 0.000000] efi: mem12: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000067cab000-0x000000008b0c0000) (564MB)
[ 0.000000] efi: mem13: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000008b0c0000-0x000000008b0e0000) (0MB)
[ 0.000000] efi: mem14: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000008b0e0000-0x000000008bd39000) (12MB)
[ 0.000000] efi: mem15: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000008bd39000-0x000000008ccb0000) (15MB)
[ 0.000000] efi: mem16: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000008ccb0000-0x000000008e0b0000) (20MB)
[ 0.000000] efi: mem17: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000008e0b0000-0x000000008e2a2000) (1MB)
[ 0.000000] efi: mem18: [Loader Code | | | | | |WB|WT|WC|UC] range=[0x000000008e2a2000-0x000000008e2bf000) (0MB)
[ 0.000000] efi: mem19: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000008e2bf000-0x000000008f4f2000) (18MB)
[ 0.000000] efi: mem20: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000008f4f2000-0x000000008f4fe000) (0MB)
[ 0.000000] efi: mem21: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000008f4fe000-0x000000008fe7f000) (9MB)
[ 0.000000] efi: mem22: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000008fe7f000-0x000000008fe82000) (0MB)
[ 0.000000] efi: mem23: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000008fe82000-0x000000008fe89000) (0MB)
[ 0.000000] efi: mem24: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000008fe89000-0x000000008fe8a000) (0MB)
[ 0.000000] efi: mem25: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000008fe8a000-0x000000008feb2000) (0MB)
[ 0.000000] efi: mem26: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000008feb2000-0x000000008feb3000) (0MB)
[ 0.000000] efi: mem27: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000008feb3000-0x000000008fff1000) (1MB)
[ 0.000000] efi: mem28: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x000000008fff1000-0x000000008fff2000) (0MB)
[ 0.000000] efi: mem29: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000008fff2000-0x000000008fff3000) (0MB)
[ 0.000000] efi: mem30: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x000000008fff3000-0x0000000090000000) (0MB)
[ 0.000000] efi: mem31: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000090000000-0x000000009000a000) (0MB)
[ 0.000000] efi: mem32: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x000000009000a000-0x000000009000b000) (0MB)
[ 0.000000] efi: mem33: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009000b000-0x000000009000e000) (0MB)
[ 0.000000] efi: mem34: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009000e000-0x0000000090014000) (0MB)
[ 0.000000] efi: mem35: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000090014000-0x000000009001c000) (0MB)
[ 0.000000] efi: mem36: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009001c000-0x000000009001d000) (0MB)
[ 0.000000] efi: mem37: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009001d000-0x000000009001e000) (0MB)
[ 0.000000] efi: mem38: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009001e000-0x0000000090021000) (0MB)
[ 0.000000] efi: mem39: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000090021000-0x0000000090022000) (0MB)
[ 0.000000] efi: mem40: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000090022000-0x0000000090024000) (0MB)
[ 0.000000] efi: mem41: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000090024000-0x000000009002c000) (0MB)
[ 0.000000] efi: mem42: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009002c000-0x0000000090043000) (0MB)
[ 0.000000] efi: mem43: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000090043000-0x0000000090044000) (0MB)
[ 0.000000] efi: mem44: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000090044000-0x0000000090045000) (0MB)
[ 0.000000] efi: mem45: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000090045000-0x0000000090046000) (0MB)
[ 0.000000] efi: mem46: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000090046000-0x0000000090048000) (0MB)
[ 0.000000] efi: mem47: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000090048000-0x000000009004d000) (0MB)
[ 0.000000] efi: mem48: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009004d000-0x0000000090057000) (0MB)
[ 0.000000] efi: mem49: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000090057000-0x0000000090060000) (0MB)
[ 0.000000] efi: mem50: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000090060000-0x0000000090066000) (0MB)
[ 0.000000] efi: mem51: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000090066000-0x000000009006c000) (0MB)
[ 0.000000] efi: mem52: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009006c000-0x0000000090074000) (0MB)
[ 0.000000] efi: mem53: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000090074000-0x0000000090090000) (0MB)
[ 0.000000] efi: mem54: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000090090000-0x0000000090095000) (0MB)
[ 0.000000] efi: mem55: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000090095000-0x0000000090096000) (0MB)
[ 0.000000] efi: mem56: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000090096000-0x0000000090097000) (0MB)
[ 0.000000] efi: mem57: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000090097000-0x00000000900b2000) (0MB)
[ 0.000000] efi: mem58: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000900b2000-0x00000000900b4000) (0MB)
[ 0.000000] efi: mem59: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000900b4000-0x00000000900b6000) (0MB)
[ 0.000000] efi: mem60: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000900b6000-0x00000000900b9000) (0MB)
[ 0.000000] efi: mem61: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000900b9000-0x00000000900bc000) (0MB)
[ 0.000000] efi: mem62: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000900bc000-0x00000000900bf000) (0MB)
[ 0.000000] efi: mem63: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000900bf000-0x00000000900c1000) (0MB)
[ 0.000000] efi: mem64: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000900c1000-0x00000000900c4000) (0MB)
[ 0.000000] efi: mem65: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000900c4000-0x00000000900d5000) (0MB)
[ 0.000000] efi: mem66: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000900d5000-0x00000000900d7000) (0MB)
[ 0.000000] efi: mem67: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000900d7000-0x00000000900d8000) (0MB)
[ 0.000000] efi: mem68: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000900d8000-0x00000000900de000) (0MB)
[ 0.000000] efi: mem69: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000900de000-0x00000000900e1000) (0MB)
[ 0.000000] efi: mem70: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000900e1000-0x00000000900e5000) (0MB)
[ 0.000000] efi: mem71: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000900e5000-0x00000000900e7000) (0MB)
[ 0.000000] efi: mem72: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000900e7000-0x00000000900e8000) (0MB)
[ 0.000000] efi: mem73: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000900e8000-0x00000000900e9000) (0MB)
[ 0.000000] efi: mem74: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000900e9000-0x00000000900ee000) (0MB)
[ 0.000000] efi: mem75: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000900ee000-0x00000000900f0000) (0MB)
[ 0.000000] efi: mem76: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000900f0000-0x00000000900f2000) (0MB)
[ 0.000000] efi: mem77: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000900f2000-0x00000000900f6000) (0MB)
[ 0.000000] efi: mem78: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000900f6000-0x00000000900fd000) (0MB)
[ 0.000000] efi: mem79: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000900fd000-0x000000009010b000) (0MB)
[ 0.000000] efi: mem80: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x000000009010b000-0x000000009010d000) (0MB)
[ 0.000000] efi: mem81: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009010d000-0x0000000090115000) (0MB)
[ 0.000000] efi: mem82: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000090115000-0x0000000090129000) (0MB)
[ 0.000000] efi: mem83: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000090129000-0x000000009027e000) (1MB)
[ 0.000000] efi: mem84: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x000000009027e000-0x0000000090281000) (0MB)
[ 0.000000] efi: mem85: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000090281000-0x0000000090282000) (0MB)
[ 0.000000] efi: mem86: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000090282000-0x0000000090283000) (0MB)
[ 0.000000] efi: mem87: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000090283000-0x00000000922bf000) (32MB)
[ 0.000000] efi: mem88: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000922bf000-0x00000000926bf000) (4MB)
[ 0.000000] efi: mem89: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x00000000926bf000-0x00000000928bf000) (2MB)
[ 0.000000] efi: mem90: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000928bf000-0x0000000092abf000) (2MB)
[ 0.000000] efi: mem91: [Reserved | | | | | |WB|WT|WC|UC] range=[0x0000000092abf000-0x0000000092ebf000) (4MB)
[ 0.000000] efi: mem92: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x0000000092ebf000-0x0000000092fbf000) (1MB)
[ 0.000000] efi: mem93: [ACPI Reclaim Memory| | | | | |WB|WT|WC|UC] range=[0x0000000092fbf000-0x0000000092fff000) (0MB)
[ 0.000000] efi: mem94: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000092fff000-0x0000000093000000) (0MB)
[ 0.000000] efi: mem95: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000100000000-0x000000025f600000) (5622MB)
[ 0.000000] efi: mem96: [Reserved | | | | | | | | | ] range=[0x00000000000a0000-0x00000000000c0000) (0MB)
[ 0.000000] efi: mem97: [Reserved | | | | | | | | | ] range=[0x0000000093000000-0x000000009fa00000) (202MB)
[ 0.000000] efi: mem98: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000e0000000-0x00000000f0000000) (256MB)
[ 0.000000] efi: mem99: [Reserved | | | | | | | | | ] range=[0x00000000fe101000-0x00000000fe113000) (0MB)
[ 0.000000] efi: mem100: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000feb00000-0x00000000feb10000) (0MB)
[ 0.000000] efi: mem101: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem102: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed00000-0x00000000fee01000) (1MB)
[ 0.000000] efi: mem103: [Memory Mapped I/O |RUN| | | | | | | | ] range=[0x00000000ff980000-0x0000000100000000) (6MB)
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 20267/Cherry 3A, BIOS 7CCN26WW 09/06/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x25f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7F80000000 write-back
[ 0.000000] 1 base 0080000000 mask 7FF0000000 write-back
[ 0.000000] 2 base 0090000000 mask 7FFE000000 write-back
[ 0.000000] 3 base 0092000000 mask 7FFF000000 write-back
[ 0.000000] 4 base 00FF980000 mask 7FFFF80000 write-protect
[ 0.000000] 5 base 00FFA00000 mask 7FFFE00000 write-protect
[ 0.000000] 6 base 00FFC00000 mask 7FFFC00000 write-protect
[ 0.000000] 7 base 0100000000 mask 7F00000000 write-back
[ 0.000000] 8 base 0200000000 mask 7F80000000 write-back
[ 0.000000] 9 base 025F600000 mask 7FFFE00000 uncachable
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] e820: last_pfn = 0x93000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000082000] 82000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b1b000, 0x01b1bfff] PGTABLE
[ 0.000000] BRK [0x01b1c000, 0x01b1cfff] PGTABLE
[ 0.000000] BRK [0x01b1d000, 0x01b1dfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x25f400000-0x25f5fffff]
[ 0.000000] [mem 0x25f400000-0x25f5fffff] page 2M
[ 0.000000] BRK [0x01b1e000, 0x01b1efff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x240000000-0x25f3fffff]
[ 0.000000] [mem 0x240000000-0x25f3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x220000000-0x23fffffff]
[ 0.000000] [mem 0x220000000-0x23fffffff] page 1G
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x8ccaffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0x8cbfffff] page 2M
[ 0.000000] [mem 0x8cc00000-0x8ccaffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x8e0b0000-0x926befff]
[ 0.000000] [mem 0x8e0b0000-0x8e1fffff] page 4k
[ 0.000000] [mem 0x8e200000-0x925fffff] page 2M
[ 0.000000] [mem 0x92600000-0x926befff] page 4k
[ 0.000000] BRK [0x01b1f000, 0x01b1ffff] PGTABLE
[ 0.000000] BRK [0x01b20000, 0x01b20fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x92fff000-0x92ffffff]
[ 0.000000] [mem 0x92fff000-0x92ffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x21fffffff]
[ 0.000000] [mem 0x100000000-0x21fffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x3795a000-0x37ca4fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x0000000092FFE014 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 0x0000000092FFE210 0000C4 (v01 LENOVO CB-01 00000001 01000013)
[ 0.000000] ACPI: FACP 0x0000000092FF7000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DSDT 0x0000000092FE7000 00C0C5 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FACS 0x0000000092FBB000 000040
[ 0.000000] ACPI: SLIC 0x0000000092FFD000 000176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: UEFI 0x0000000092FFC000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FPDT 0x0000000092FFA000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MSDM 0x0000000092FF9000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASF! 0x0000000092FF8000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: HPET 0x0000000092FF6000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: APIC 0x0000000092FF5000 00008C (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MCFG 0x0000000092FF4000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000092FE6000 0007F9 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: BOOT 0x0000000092FE4000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASPT 0x0000000092FE2000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DBGP 0x0000000092FE1000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000092FD8000 000539 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000092FD7000 000AD8 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000092FD3000 0032C5 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000092FD2000 000068 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000092FD1000 00088F (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DMAR 0x0000000092FCF000 000088 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: BGRT 0x0000000092FD0000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000025f5fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x25f5f9000-0x25f5fcfff]
[ 0.000000] [ffffea0000000000-ffffea00097fffff] PMD -> [ffff880256e00000-ffff88025ebfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000025f5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000006efff]
[ 0.000000] node 0: [mem 0x0000000000070000-0x0000000000087fff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000008ccaffff]
[ 0.000000] node 0: [mem 0x000000008e0b0000-0x00000000926befff]
[ 0.000000] node 0: [mem 0x0000000092fff000-0x0000000092ffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000025f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000025f5fffff]
[ 0.000000] On node 0 totalpages: 2033734
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 25 pages reserved
[ 0.000000] DMA zone: 3974 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9227 pages used for memmap
[ 0.000000] DMA32 zone: 590528 pages, LIFO batch:31
[ 0.000000] Normal zone: 22488 pages used for memmap
[ 0.000000] Normal zone: 1439232 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0x9da00000-0x9f9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8ccb0000-0x8e0affff]
[ 0.000000] PM: Registered nosave memory: [mem 0x926bf000-0x928befff]
[ 0.000000] PM: Registered nosave memory: [mem 0x928bf000-0x92ebefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x92ebf000-0x92fbefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x92fbf000-0x92ffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x93000000-0x9f9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfe100fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe113000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff97ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff980000-0xffffffff]
[ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88025f200000 s86168 r8192 d32616 u262144
[ 0.000000] pcpu-alloc: s86168 r8192 d32616 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2001930
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=4ba3d184-2b03-4422-ac1a-2bd40dd37cb8 rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: CPU: 0 PID: 0 at drivers/iommu/dmar.c:829 warn_invalid_dmar+0x7c/0x90()
[ 0.000000] Your BIOS is broken; DMAR reported at address 0!
BIOS vendor: LENOVO; Ver: 7CCN26WW; Product Version: IdeaPad U330p
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.0.1-1-ARCH #1
[ 0.000000] Hardware name: LENOVO 20267/Cherry 3A, BIOS 7CCN26WW 09/06/2013
[ 0.000000] 0000000000000000 f4e3b87505eb06f4 ffffffff81803cf8 ffffffff8156de97
[ 0.000000] 0000000000000000 ffffffff81803d50 ffffffff81803d38 ffffffff81074d7a
[ 0.000000] ffffffff81803d68 0000000000000000 ffffffff8172bf46 ffffffff81b1a008
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffff8156de97>] dump_stack+0x4c/0x6e
[ 0.000000] [<ffffffff81074d7a>] warn_slowpath_common+0x8a/0xc0
[ 0.000000] [<ffffffff81074e6e>] warn_slowpath_fmt_taint+0x4e/0x70
[ 0.000000] [<ffffffff818fac9d>] ? __acpi_map_table+0x13/0x18
[ 0.000000] [<ffffffff81567d07>] ? acpi_os_map_iomem+0x27/0x14e
[ 0.000000] [<ffffffff813ce0cc>] warn_invalid_dmar+0x7c/0x90
[ 0.000000] [<ffffffff81567e3c>] ? acpi_os_map_memory+0xe/0x10
[ 0.000000] [<ffffffff8156873c>] dmar_validate_one_drhd+0xcc/0xf0
[ 0.000000] [<ffffffff813ce27a>] dmar_walk_remapping_entries+0x8a/0x1b0
[ 0.000000] [<ffffffff8192e7f9>] detect_intel_iommu+0x61/0xf2
[ 0.000000] [<ffffffff81568670>] ? xen_swiotlb_init+0x4d0/0x4d0
[ 0.000000] [<ffffffff818f3c74>] pci_iommu_alloc+0x51/0x6e
[ 0.000000] [<ffffffff81904aff>] mem_init+0x17/0x9d
[ 0.000000] [<ffffffff818e8dff>] start_kernel+0x255/0x4ac
[ 0.000000] [<ffffffff818e8120>] ? early_idt_handlers+0x120/0x120
[ 0.000000] [<ffffffff818e8339>] x86_64_start_reservations+0x2a/0x2c
[ 0.000000] [<ffffffff818e849c>] x86_64_start_kernel+0x161/0x184
[ 0.000000] ---[ end trace 02d721d3c6215a91 ]---
[ 0.000000] Memory: 7856876K/8134936K available (5601K kernel code, 835K rwdata, 1776K rodata, 1160K init, 1152K bss, 278060K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:760 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] tsc: PIT calibration matches HPET. 1 loops
[ 0.000000] tsc: Detected 2294.175 MHz processor
[ 0.000044] Calibrating delay loop (skipped), value calculated using timer frequency.. 4590.53 BogoMIPS (lpj=7647250)
[ 0.000048] pid_max: default: 32768 minimum: 301
[ 0.000054] ACPI: Core revision 20150204
[ 0.021259] ACPI: All ACPI Tables successfully acquired
[ 0.047478] Security Framework initialized
[ 0.047487] Yama: becoming mindful.
[ 0.048209] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.050517] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.051505] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.051519] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.051795] Initializing cgroup subsys blkio
[ 0.051800] Initializing cgroup subsys memory
[ 0.051807] Initializing cgroup subsys devices
[ 0.051810] Initializing cgroup subsys freezer
[ 0.051813] Initializing cgroup subsys net_cls
[ 0.051843] CPU: Physical Processor ID: 0
[ 0.051844] CPU: Processor Core ID: 0
[ 0.051850] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.051851] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.053148] mce: CPU supports 7 MCE banks
[ 0.053168] CPU0: Thermal monitoring enabled (TM1)
[ 0.053181] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.053183] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.053321] Freeing SMP alternatives memory: 20K (ffffffff819f4000 - ffffffff819f9000)
[ 0.054410] Ignoring BGRT: invalid status 0 (expected 1)
[ 0.057040] ftrace: allocating 21221 entries in 83 pages
[ 0.069600] dmar: Host address width 39
[ 0.069603] dmar: DRHD base: 0x00000000000000 flags: 0x1
[ 0.069605] dmar: parse DMAR table failure.
[ 0.070689] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.103674] TSC deadline timer enabled
[ 0.103679] smpboot: CPU0: Intel(R) Core(TM) i5-4200U CPU @ 1.60GHz (fam: 06, model: 45, stepping: 01)
[ 0.103715] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.103744] ... version: 3
[ 0.103745] ... bit width: 48
[ 0.103747] ... generic registers: 4
[ 0.103748] ... value mask: 0000ffffffffffff
[ 0.103749] ... max period: 0000ffffffffffff
[ 0.103751] ... fixed-purpose events: 3
[ 0.103752] ... event mask: 000000070000000f
[ 0.123794] x86: Booting SMP configuration:
[ 0.123796] .... node #0, CPUs: #1
[ 0.138543] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.145191] #2 #3
[ 0.180995] x86: Booted up 1 node, 4 CPUs
[ 0.181000] smpboot: Total of 4 processors activated (18360.12 BogoMIPS)
[ 0.186435] devtmpfs: initialized
[ 0.189804] PM: Registering ACPI NVS region [mem 0x92ebf000-0x92fbefff] (1048576 bytes)
[ 0.190050] pinctrl core: initialized pinctrl subsystem
[ 0.190124] RTC time: 9:29:51, date: 05/10/15
[ 0.190281] NET: Registered protocol family 16
[ 0.202884] cpuidle: using governor ladder
[ 0.216212] cpuidle: using governor menu
[ 0.216250] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.216253] ACPI: bus type PCI registered
[ 0.216255] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.216361] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.216364] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.216813] PCI: Using configuration type 1 for base access
[ 0.229973] ACPI: Added _OSI(Module Device)
[ 0.229976] ACPI: Added _OSI(Processor Device)
[ 0.229978] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.229980] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.236152] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.240737] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.241979] ACPI: Dynamic OEM Table Load:
[ 0.241994] ACPI: SSDT 0xFFFF8802554FF800 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120816)
[ 0.243091] ACPI: Dynamic OEM Table Load:
[ 0.243104] ACPI: SSDT 0xFFFF880255502000 0005AA (v01 PmRef ApIst 00003000 INTL 20120816)
[ 0.244255] ACPI: Dynamic OEM Table Load:
[ 0.244265] ACPI: SSDT 0xFFFF880255512E00 000119 (v01 PmRef ApCst 00003000 INTL 20120816)
[ 0.250458] ACPI: Interpreter enabled
[ 0.250470] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150204/hwxface-580)
[ 0.250480] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150204/hwxface-580)
[ 0.250508] ACPI: (supports S0 S3 S4 S5)
[ 0.250510] ACPI: Using IOAPIC for interrupt routing
[ 0.250551] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.270829] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.270837] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.271662] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.272256] PCI host bridge to bus 0000:00
[ 0.272260] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.272263] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.272266] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.272269] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.272271] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.272273] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.272275] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.272277] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.272279] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.272281] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.272283] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.272285] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.272287] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.272289] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.272291] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.272293] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.272296] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff window]
[ 0.272306] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[ 0.272513] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
[ 0.272529] pci 0000:00:02.0: reg 0x10: [mem 0xb2000000-0xb23fffff 64bit]
[ 0.272539] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.272545] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
[ 0.272742] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[ 0.272755] pci 0000:00:03.0: reg 0x10: [mem 0xb2510000-0xb2513fff 64bit]
[ 0.273026] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[ 0.273075] pci 0000:00:14.0: reg 0x10: [mem 0xb2500000-0xb250ffff 64bit]
[ 0.273242] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.273385] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.273451] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[ 0.273502] pci 0000:00:16.0: reg 0x10: [mem 0xb2518000-0xb251801f 64bit]
[ 0.273679] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.273911] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[ 0.273952] pci 0000:00:1b.0: reg 0x10: [mem 0xb2514000-0xb2517fff 64bit]
[ 0.274147] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.274296] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.274360] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
[ 0.274568] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.274723] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.274789] pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400
[ 0.274995] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.275151] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.275214] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
[ 0.275420] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.275577] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.275654] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[ 0.275702] pci 0000:00:1d.0: reg 0x10: [mem 0xb251c000-0xb251c3ff]
[ 0.275922] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.276091] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.276153] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[ 0.276586] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[ 0.276629] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f]
[ 0.276648] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097]
[ 0.276667] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087]
[ 0.276685] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093]
[ 0.276703] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
[ 0.276722] pci 0000:00:1f.2: reg 0x24: [mem 0xb251b000-0xb251b7ff]
[ 0.276832] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.277021] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[ 0.277058] pci 0000:00:1f.3: reg 0x10: [mem 0xb2519000-0xb25190ff 64bit]
[ 0.277111] pci 0000:00:1f.3: reg 0x20: [io 0x4040-0x405f]
[ 0.277465] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.277656] pci 0000:02:00.0: [8086:08b2] type 00 class 0x028000
[ 0.277706] pci 0000:02:00.0: reg 0x10: [mem 0xb2400000-0xb2401fff 64bit]
[ 0.277924] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.277976] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.286250] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.286261] pci 0000:00:1c.2: bridge window [mem 0xb2400000-0xb24fffff]
[ 0.286408] pci 0000:00:1c.3: PCI bridge to [bus 03-08]
[ 0.286415] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.286423] pci 0000:00:1c.3: bridge window [mem 0xb1000000-0xb1ffffff]
[ 0.286435] pci 0000:00:1c.3: bridge window [mem 0xb0000000-0xb0ffffff 64bit pref]
[ 0.286492] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 0.287362] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.287422] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.287478] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.287534] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.287589] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.287644] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.287698] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.287753] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.288526] ACPI: Enabled 5 GPEs in block 00 to 7F
[ 0.288577] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
[ 0.288706] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.288709] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.288712] vgaarb: loaded
[ 0.288714] vgaarb: bridge control possible 0000:00:02.0
[ 0.288854] PCI: Using ACPI for IRQ routing
[ 0.295044] PCI: pci_cache_line_size set to 64 bytes
[ 0.295089] e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff]
[ 0.295091] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[ 0.295093] e820: reserve RAM buffer [mem 0x8ccb0000-0x8fffffff]
[ 0.295095] e820: reserve RAM buffer [mem 0x926bf000-0x93ffffff]
[ 0.295097] e820: reserve RAM buffer [mem 0x93000000-0x93ffffff]
[ 0.295099] e820: reserve RAM buffer [mem 0x25f600000-0x25fffffff]
[ 0.295243] NetLabel: Initializing
[ 0.295245] NetLabel: domain hash size = 128
[ 0.295246] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.295262] NetLabel: unlabeled traffic allowed by default
[ 0.295291] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.295298] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.297333] Switched to clocksource hpet
[ 0.303552] pnp: PnP ACPI init
[ 0.303701] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.303705] system 00:00: [io 0xffff] has been reserved
[ 0.303707] system 00:00: [io 0xffff] has been reserved
[ 0.303710] system 00:00: [io 0xffff] has been reserved
[ 0.303712] system 00:00: [io 0x1800-0x18fe] could not be reserved
[ 0.303715] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.303719] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.303782] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.303842] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.303846] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.303883] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.303986] pnp 00:04: Plug and Play ACPI device, IDs ETD060f PNP0f0b PNP0f12 PNP0f03 PNP0f0e PNP0f13 (active)
[ 0.304212] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.304215] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.304218] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.304220] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.304223] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.304225] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.304228] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.304230] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.304233] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.304235] system 00:05: [mem 0x9fa10000-0x9fa10fff] has been reserved
[ 0.304238] system 00:05: [mem 0xffffffff-0x100000ffe] could not be reserved
[ 0.304241] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.305220] pnp: PnP ACPI: found 6 devices
[ 0.312019] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 0.312024] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[ 0.312029] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
[ 0.312047] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.312050] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.312052] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.312063] pci 0000:00:1c.0: BAR 14: assigned [mem 0x9fb00000-0x9fcfffff]
[ 0.312077] pci 0000:00:1c.0: BAR 15: assigned [mem 0x9fd00000-0x9fefffff 64bit pref]
[ 0.312081] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.312084] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.312088] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.312093] pci 0000:00:1c.0: bridge window [mem 0x9fb00000-0x9fcfffff]
[ 0.312098] pci 0000:00:1c.0: bridge window [mem 0x9fd00000-0x9fefffff 64bit pref]
[ 0.312104] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.312109] pci 0000:00:1c.2: bridge window [mem 0xb2400000-0xb24fffff]
[ 0.312118] pci 0000:00:1c.3: PCI bridge to [bus 03-08]
[ 0.312121] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.312126] pci 0000:00:1c.3: bridge window [mem 0xb1000000-0xb1ffffff]
[ 0.312130] pci 0000:00:1c.3: bridge window [mem 0xb0000000-0xb0ffffff 64bit pref]
[ 0.312137] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.312140] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.312142] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.312144] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.312146] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.312148] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.312151] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.312153] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.312155] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.312157] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.312159] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.312161] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 0.312163] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 0.312165] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 0.312167] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 0.312170] pci_bus 0000:00: resource 19 [mem 0x9fa00000-0xfeafffff window]
[ 0.312172] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.312174] pci_bus 0000:01: resource 1 [mem 0x9fb00000-0x9fcfffff]
[ 0.312176] pci_bus 0000:01: resource 2 [mem 0x9fd00000-0x9fefffff 64bit pref]
[ 0.312179] pci_bus 0000:02: resource 1 [mem 0xb2400000-0xb24fffff]
[ 0.312181] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.312183] pci_bus 0000:03: resource 1 [mem 0xb1000000-0xb1ffffff]
[ 0.312185] pci_bus 0000:03: resource 2 [mem 0xb0000000-0xb0ffffff 64bit pref]
[ 0.312228] NET: Registered protocol family 2
[ 0.312465] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.312657] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.312836] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.312860] TCP: reno registered
[ 0.312875] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.312912] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.312988] NET: Registered protocol family 1
[ 0.313005] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.327448] PCI: CLS 64 bytes, default 64
[ 0.327501] Unpacking initramfs...
[ 0.412467] Freeing initrd memory: 3372K (ffff88003795a000 - ffff880037ca5000)
[ 0.412479] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.412483] software IO TLB [mem 0x870c0000-0x8b0c0000] (64MB) mapped at [ffff8800870c0000-ffff88008b0bffff]
[ 0.412512] Simple Boot Flag at 0x44 set to 0x1
[ 0.412725] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 0.412789] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x10
[ 0.412797] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x10
[ 0.412805] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x10
[ 0.412814] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x10
[ 0.412870] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 0.412907] Scanning for low memory corruption every 60 seconds
[ 0.413286] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.413308] Initialise system trusted keyring
[ 0.413707] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.415458] zpool: loaded
[ 0.415461] zbud: loaded
[ 0.415678] VFS: Disk quotas dquot_6.5.2
[ 0.415726] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.415943] Key type big_key registered
[ 0.416171] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.416228] io scheduler noop registered
[ 0.416233] io scheduler deadline registered
[ 0.416273] io scheduler cfq registered (default)
[ 0.416963] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.416969] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.416986] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 0.416989] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.416993] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[ 0.417011] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 0.417015] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 0.417023] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.417065] pciehp 0000:00:1c.0:pcie04: Slot #0 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
[ 0.417099] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
[ 0.417108] pciehp 0000:00:1c.3:pcie04: Slot #3 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
[ 0.417134] pciehp 0000:00:1c.3:pcie04: service driver pciehp loaded
[ 0.417140] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.417160] efifb: probing for efifb
[ 0.417181] efifb: framebuffer at 0xa0000000, mapped to 0xffffc90010f00000, using 4160k, total 4160k
[ 0.417183] efifb: mode is 1366x768x32, linelength=5504, pages=1
[ 0.417184] efifb: scrolling: redraw
[ 0.417187] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.420754] Console: switching to colour frame buffer device 170x48
[ 0.424164] fb0: EFI VGA frame buffer device
[ 0.424176] intel_idle: MWAIT substates: 0x11142120
[ 0.424178] intel_idle: v0.4 model 0x45
[ 0.424179] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.424505] GHES: HEST is not enabled!
[ 0.424588] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.425067] Linux agpgart interface v0.103
[ 0.425130] rtc_cmos 00:01: RTC can wake from S4
[ 0.425268] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.425299] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.425313] Intel P-state driver initializing.
[ 0.425465] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.413465] tsc: Refined TSC clocksource calibration: 2294.688 MHz
[ 2.413125] Switched to clocksource tsc
[ 82.866587] TCP: cubic registered
[ 82.866714] NET: Registered protocol family 10
[ 82.866954] NET: Registered protocol family 17
[ 82.867726] Loading compiled-in X.509 certificates
[ 82.867744] registered taskstats version 1
[ 82.868391] Magic number: 15:622:474
[ 82.868494] rtc_cmos 00:01: setting system clock to 2015-05-10 09:31:14 UTC (1431250274)
[ 82.868595] PM: Hibernation image not present or could not be loaded.
[ 82.868875] Freeing unused kernel memory: 1160K (ffffffff818d2000 - ffffffff819f4000)
[ 82.868876] Write protecting the kernel read-only data: 8192k
[ 82.869179] Freeing unused kernel memory: 532K (ffff88000157b000 - ffff880001600000)
[ 82.869263] Freeing unused kernel memory: 272K (ffff8800017bc000 - ffff880001800000)
[ 82.875762] random: systemd-tmpfile urandom read with 78 bits of entropy available
[ 82.888461] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2D] at 0x60,0x64 irq 1,12
[ 82.911618] ACPI: bus type USB registered
[ 82.911655] usbcore: registered new interface driver usbfs
[ 82.911670] usbcore: registered new interface driver hub
[ 82.911702] usbcore: registered new device driver usb
[ 82.911794] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 82.911850] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 82.912630] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 82.912881] ehci-pci: EHCI PCI platform driver
[ 82.913059] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 82.913066] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 82.913080] ehci-pci 0000:00:1d.0: debug port 2
[ 82.913560] SCSI subsystem initialized
[ 82.914756] libata version 3.00 loaded.
[ 82.916990] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 82.917012] ehci-pci 0000:00:1d.0: irq 23, io mem 0xb251c000
[ 82.924735] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 82.924981] hub 1-0:1.0: USB hub found
[ 82.924988] hub 1-0:1.0: 2 ports detected
[ 82.925365] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 82.925376] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 82.925452] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000b810
[ 82.925458] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 82.925751] hub 2-0:1.0: USB hub found
[ 82.925768] hub 2-0:1.0: 9 ports detected
[ 82.927202] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 82.927206] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 82.927353] hub 3-0:1.0: USB hub found
[ 82.927363] hub 3-0:1.0: 4 ports detected
[ 82.927907] ahci 0000:00:1f.2: version 3.0
[ 82.932069] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 82.944698] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x2 impl SATA mode
[ 82.944704] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[ 82.945139] scsi host0: ahci
[ 82.945274] scsi host1: ahci
[ 82.945379] scsi host2: ahci
[ 82.945443] ata1: DUMMY
[ 82.945446] ata2: SATA max UDMA/133 abar m2048@0xb251b000 port 0xb251b180 irq 44
[ 82.945448] ata3: DUMMY
[ 83.231283] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 83.264603] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 83.266700] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 83.266704] ata2.00: ATA-9: Samsung SSD 840 EVO 250GB, EXT0BB0Q, max UDMA/133
[ 83.266707] ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 83.267065] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 83.267071] ata2.00: configured for UDMA/133
[ 83.267254] scsi 1:0:0:0: Direct-Access ATA Samsung SSD 840 BB0Q PQ: 0 ANSI: 5
[ 83.269231] sd 1:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 83.269334] sd 1:0:0:0: [sda] Write Protect is off
[ 83.269339] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 83.269359] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 83.270978] sda: sda1 sda2
[ 83.271791] sd 1:0:0:0: [sda] Attached SCSI disk
[ 83.284573] usb 2-4: new full-speed USB device number 2 using xhci_hcd
[ 83.355258] hub 1-1:1.0: USB hub found
[ 83.355311] hub 1-1:1.0: 8 ports detected
[ 83.462067] hidraw: raw HID events driver (C) Jiri Kosina
[ 83.465833] usbcore: registered new interface driver usbhid
[ 83.465836] usbhid: USB HID core driver
[ 83.467369] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-4/input2
[ 83.584939] input: Logitech M315/M235 as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.2/0003:046D:C52B.0003/0003:046D:4009.0004/input/input2
[ 83.585021] logitech-hidpp-device 0003:046D:4009.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech M315/M235] on usb-0000:00:14.0-4:1
[ 83.586903] input: Logitech M185 as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.2/0003:046D:C52B.0003/0003:046D:4008.0005/input/input3
[ 83.586954] logitech-hidpp-device 0003:046D:4008.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech M185] on usb-0000:00:14.0-4:2
[ 83.591105] input: Logitech K270 as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.2/0003:046D:C52B.0003/0003:046D:4003.0006/input/input4
[ 83.591222] logitech-hidpp-device 0003:046D:4003.0006: input,hidraw3: USB HID v1.11 Keyboard [Logitech K270] on usb-0000:00:14.0-4:3
[ 83.621088] usb 2-5: new high-speed USB device number 3 using xhci_hcd
[ 83.678182] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 83.906684] systemd[1]: systemd 219 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
[ 83.906861] systemd[1]: Detected architecture 'x86-64'.
[ 83.909200] systemd[1]: Set hostname to <lenovo>.
[ 83.969066] systemd[1]: Unit type .busname is not supported on this system.
[ 83.980863] usb 2-6: new full-speed USB device number 4 using xhci_hcd
[ 84.037186] systemd[1]: Reached target Login Prompts.
[ 84.037200] systemd[1]: Starting Login Prompts.
[ 84.037213] systemd[1]: Reached target Remote File Systems.
[ 84.037221] systemd[1]: Starting Remote File Systems.
[ 84.037427] systemd[1]: Created slice Root Slice.
[ 84.037440] systemd[1]: Starting Root Slice.
[ 84.037476] systemd[1]: Listening on Journal Socket (/dev/log).
[ 84.037484] systemd[1]: Starting Journal Socket (/dev/log).
[ 84.037591] systemd[1]: Created slice System Slice.
[ 84.037604] systemd[1]: Starting System Slice.
[ 84.037630] systemd[1]: Listening on udev Control Socket.
[ 84.037637] systemd[1]: Starting udev Control Socket.
[ 84.037662] systemd[1]: Listening on Journal Socket.
[ 84.037672] systemd[1]: Starting Journal Socket.
[ 84.037683] systemd[1]: Started File System Check on Root Device.
[ 84.038047] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 84.038093] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 84.038105] systemd[1]: Starting LVM2 metadata daemon socket.
[ 84.038449] systemd[1]: Mounting POSIX Message Queue File System...
[ 84.038814] systemd[1]: Mounting Huge Pages File System...
[ 84.047018] systemd[1]: Mounting Temporary Directory...
[ 84.047650] systemd[1]: Mounting Debug File System...
[ 84.047782] systemd[1]: Created slice User and Session Slice.
[ 84.047800] systemd[1]: Starting User and Session Slice.
[ 84.047842] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 84.047853] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 84.062947] EXT4-fs (sda2): re-mounted. Opts: data=ordered
[ 84.078080] systemd[1]: Listening on Journal Audit Socket.
[ 84.078577] systemd[1]: Starting Journal Service...
[ 84.078632] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 84.078649] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 84.078660] systemd[1]: Reached target Slices.
[ 84.078668] systemd[1]: Starting Slices.
[ 84.078800] systemd[1]: Created slice system-getty.slice.
[ 84.078810] systemd[1]: Starting system-getty.slice.
[ 84.078864] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 84.078874] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 84.078981] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 84.078993] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 84.079983] systemd[1]: Starting Set Up Additional Binary Formats...
[ 84.080478] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 84.080516] systemd[1]: Reached target Encrypted Volumes.
[ 84.080533] systemd[1]: Starting Encrypted Volumes.
[ 84.081080] systemd[1]: Starting Setup Virtual Console...
[ 84.081888] systemd[1]: Starting Load Kernel Modules...
[ 84.081939] systemd[1]: Listening on Delayed Shutdown Socket.
[ 84.081956] systemd[1]: Starting Delayed Shutdown Socket.
[ 84.082017] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 84.082029] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 84.082072] systemd[1]: Listening on udev Kernel Socket.
[ 84.082083] systemd[1]: Starting udev Kernel Socket.
[ 84.082551] systemd[1]: Starting udev Coldplug all Devices...
[ 84.083426] systemd[1]: Mounted Debug File System.
[ 84.083453] systemd[1]: Mounted POSIX Message Queue File System.
[ 84.083470] systemd[1]: Mounted Huge Pages File System.
[ 84.083500] systemd[1]: Mounted Temporary Directory.
[ 84.083682] systemd[1]: Started Remount Root and Kernel File Systems.
[ 84.084018] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 84.089010] systemd[1]: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 146 (systemd-binfmt)
[ 84.096129] systemd[1]: Mounting Arbitrary Executable File Formats File System...
[ 84.096178] systemd[1]: Started Rebuild Dynamic Linker Cache.
[ 84.096217] systemd[1]: Started First Boot Wizard.
[ 84.097086] systemd[1]: Starting Load/Save Random Seed...
[ 84.098481] systemd-journald[145]: Failed to set file attributes: Inappropriate ioctl for device
[ 84.098584] systemd[1]: Started Rebuild Hardware Database.
[ 84.098618] systemd[1]: Started Create System Users.
[ 84.099157] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 84.099573] systemd[1]: Activating swap /swapfile...
[ 84.100516] systemd[1]: Mounted Arbitrary Executable File Formats File System.
[ 84.102641] vboxdrv: Found 4 processor cores.
[ 84.107486] vboxdrv: fAsync=0 offMin=0x2eb offMax=0x2621
[ 84.107551] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 84.107552] vboxdrv: Successfully loaded version 4.3.26_OSE (interface 0x001a000a).
[ 84.108014] systemd[1]: Started Load Kernel Modules.
[ 84.108184] systemd[1]: Started udev Coldplug all Devices.
[ 84.108240] systemd[1]: Mounted FUSE Control File System.
[ 84.108594] systemd[1]: Starting Apply Kernel Variables...
[ 84.109083] systemd[1]: Mounting Configuration File System...
[ 84.110731] systemd[1]: Started Set Up Additional Binary Formats.
[ 84.112492] systemd[1]: Mounted Configuration File System.
[ 84.114000] systemd[1]: Started Load/Save Random Seed.
[ 84.145783] Adding 102396k swap on /swapfile. Priority:-1 extents:1 across:102396k SSFS
[ 84.145846] systemd[1]: Activated swap /swapfile.
[ 84.145888] systemd[1]: Reached target Swap.
[ 84.145899] systemd[1]: Starting Swap.
[ 84.269011] systemd[1]: Started Apply Kernel Variables.
[ 84.297839] systemd[1]: Started Create Static Device Nodes in /dev.
[ 84.298480] systemd[1]: Starting udev Kernel Device Manager...
[ 84.298502] systemd[1]: Reached target Local File Systems (Pre).
[ 84.298517] systemd[1]: Starting Local File Systems (Pre).
[ 84.308489] systemd[1]: Started Setup Virtual Console.
[ 84.361659] systemd[1]: Started udev Kernel Device Manager.
[ 84.407676] systemd[1]: Started Journal Service.
[ 84.427402] systemd-journald[145]: Received request to flush runtime journal from PID 1
[ 84.431669] [drm] Initialized drm 1.1.0 20060810
[ 84.435649] random: nonblocking pool is initialized
[ 84.484700] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 84.531880] cfg80211: Calling CRDA to update world regulatory domain
[ 84.535985] ACPI Warning: SystemIO range 0x0000000000004040-0x000000000000405f conflicts with OpRegion 0x0000000000004040-0x000000000000404f (\_SB_.PCI0.SBUS.SMBI) (20150204/utaddress-258)
[ 84.535994] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 84.548611] Intel(R) Wireless WiFi driver for Linux
[ 84.548614] Copyright(c) 2003- 2014 Intel Corporation
[ 84.553829] sound hdaudioC0D0: autoconfig for ALC3239: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 84.553832] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 84.553834] sound hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 84.553835] sound hdaudioC0D0: mono: mono_out=0x0
[ 84.553836] sound hdaudioC0D0: inputs:
[ 84.553838] sound hdaudioC0D0: Mic=0x19
[ 84.553840] sound hdaudioC0D0: Internal Mic=0x12
[ 84.582647] iwlwifi 0000:02:00.0: loaded firmware version 25.15.12.0 op_mode iwlmvm
[ 84.593153] input: HDA Digital PCBeep as /devices/pci0000:00/

Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Windows Accessibility settings
* Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
* http://kb.mozillazine.org/Website_colors_are_wrong

Hanging on boot after upgrading server.app

After upgrading to 10.9 Server.App my boot hangs at "/etc/rc.server: line 14: /etc/rc.server.firewall: No such file or directory" and won't boot into safe mode either. Anyone know how I can fix this without restoring from a backup?

Cameron, thanks for your feedback.
I'm on a 2011 iMac, with a DIY Fusion Drive (I added a SSD inside). I always had slow startups. I thought it was the custom Fusion Drive's fault, but now I know it was not.
Now I can't boot at all, just after applying the most recent 10.9.2 security update. This is a software issue. The iMac was running Mountain Lion Server, then I upgraded to Mavericks but did not upgrade to Mavericks Server. However there were remains of the old 10.8 Server app.
As I said, yesterday I deleted all those remains (booting from an external drive). However I forgot the most obvious thing: open that **** /etc/rc.server file and comment out line 14.
This morning I booted the iMac again, in verbose mode. The message about /etc/rc.server was not there, at last, but fsck was launched and took a long time. I had to go to work, where I am now, and I don't know if fsck finished its work. I'll let you know...

Mac Mini w/ Sony V2500 Hangs During Boot After Upgrading to 10.4.10

I searched the the threads for something similar on this topic. but I could not find anything, so I am putting the question out to the forum.
I have an interesting situtation after I upgraded my Mini to 10.4.10 last night. It seems that when the Mini boots up while connected to my Sony KDL-40V2500 LCD, the Mini will hang in the boot squence. If I disconnect the DVI connection (I have a DVI to HDMI connection) at the hanging point in the boot, the Mini will continue to boot fine and then when I reconnect the DVI cable to the Mini, the display works fine with no issues.
Has anyone else experience this unique issue and are there any recommendations.
Thanks in advance for any help!
Brandon
Mac Mini & MacBook Pro Mac OS X (10.4.10) Mac Mini Intel C2D, DVI to HDMI connection, Sony KDL-40V2500 LCD
Mac Mini & MacBook Pro Mac OS X (10.4.10)

Hi SwimRef and hplus-
Thank you both for your suggestions. I did try to boot with the Airport turned off and I was able to boot without any issue. However, when I turned the Airport back on, the ballon was spinning for a good period of time and then I gave up and turned off the machine.
However, the Mini still boots without a problem when the DVI cable is not attached, so for the mean time, I'm gonna stick with the process of booting without the cable until I have time to reinstall a fresh OS (no archive and reinstall).
I will put this tidbit out there that seems odd. When I was trying to figure out the issues yesterday, I did hook the Mini up to my 20" Cinema Display and all loaded well without any issues. In addition to the no issue load, I noticed that my screen background was not the same, but all of my other settings were just the same as if I have booting using the Sony TV. Any thoughts on if the two are connnect?
Thanks again everyone for your support!
Brandon
Mac Mini & MacBook Pro Mac OS X (10.4.10)

648 Max Hangs during boot after upgrading memory

:confused2:Can someone please help me.
I recently decided to upgrade my memory to 1 gig by adding a further 512mb ddr ram to my system. I already have 512mb pc2700 ram and found that pc3200 ram is cheaper so bought that to add, shouldn't be a problem as the manual says it should work with "333 and up". I used all the tried and tested safety methods for fitting ram so I know there has been no ESD (I have built several machines in the past so it is not a stupid error on my part (I hope))
I fitted the ram in the usual manner and turned on the system to find it would beep once (sounds like normal POST to me it always beeps once, however Ami bios beep codes say it could be dram refresh failure? but 1 beep is also POST ok?) and then hangs. No display no nothing. Fans are all running so power is there but no boot.
I looked on the D-Bracket and it has two red lights down the left side 2 green down the right which indicates it is testing memory. That is as far as it gets.
I had to use rather a lot of force in my attempt to fit the memory and feel I may have either cracked the motherboard, or pushed it so hard that it touched the casing underneath and shorted out (Oh dear, ESD). I have tried stripping out every component except ram,display and hard drive but still nothing. I have also tried putting just the old ram back in as it was before, no joy there either.
Could this be the motherboard is dead or the memory or both?
Any help greatly appreciated
DUCKULA

I finally decided to rip out my Mobo and have a good look around. I fiddled with it a while and then put it back and tried to boot up again. I discovered that if I push out the mobo in the opposite direction to the one I used to try and push the memory in, it will boot. Therefore it has to be a crack in one of the tracks in the mobo itself, although I can't see anything, it could just be a hairline crack, but that would be enough.
The lesson learned is, put your memory in before fitting the Mobo into your case, or at least try and support the underside better, whilst you push
I'm off to the shop for a new one (and a power supply).
Thanks guys for the helpful tips, at least I know what to look for next time

My Arch is very slow after upgrading to kernel 3.0

Hi men! This is my first post on this forum, i'm italian and i'm using archlinux since 4 months (sorry if my english is bad)... I would like you to help me to solve a problem: as i wrote in object my system has became very slow after upgrading to kernel 3.0: system booting, applications launch, general responses of my tasks....what's the problem? How can i resolve it? Thanks!!

However the kernel26-lts looks slower than 3.0 so i returned to the last one...iìm going to see dmesg outputs...i've to remove "quiet" from the grub.cfg
EDIT: I've checked but no error is shown....this is dmesg.log:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0-ARCH (tobias@T-POWA-LX) (gcc version 4.6.1 (GCC) ) #1 SMP PREEMPT Tue Aug 16 08:44:20 CEST 2011
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/disk/by-uuid/ea679d77-65a5-4cc3-b46e-286b953789f7 resume=/dev/sda9 ro vga=0x3f0 nomodeset
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dee74000 (usable)
[ 0.000000] BIOS-e820: 00000000dee74000 - 00000000deebc000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000deebc000 - 00000000deecd000 (reserved)
[ 0.000000] BIOS-e820: 00000000deecd000 - 00000000deedf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000deedf000 - 00000000deee0000 (reserved)
[ 0.000000] BIOS-e820: 00000000deee0000 - 00000000deee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000deee3000 - 00000000def11000 (reserved)
[ 0.000000] BIOS-e820: 00000000def11000 - 00000000def12000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000def12000 - 00000000def15000 (reserved)
[ 0.000000] BIOS-e820: 00000000def15000 - 00000000def17000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000def17000 - 00000000def1b000 (reserved)
[ 0.000000] BIOS-e820: 00000000def1b000 - 00000000def1e000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000def1e000 - 00000000def22000 (reserved)
[ 0.000000] BIOS-e820: 00000000def22000 - 00000000def31000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000def31000 - 00000000e0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffa00000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000118000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: Sony Corporation VPCEC1M1E/VAIO, BIOS R0300Y8 07/20/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x118000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FE0000000 write-back
[ 0.000000] 3 base 100000000 mask FE0000000 write-back
[ 0.000000] 4 base 118000000 mask FF8000000 uncachable
[ 0.000000] 5 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xdee74 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000fc980] fc980
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000dee74000
[ 0.000000] 0000000000 - 00dee00000 page 2M
[ 0.000000] 00dee00000 - 00dee74000 page 4k
[ 0.000000] kernel direct mapping tables up to dee74000 @ dee6e000-dee74000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000118000000
[ 0.000000] 0100000000 - 0118000000 page 2M
[ 0.000000] kernel direct mapping tables up to 118000000 @ 117ffa000-118000000
[ 0.000000] RAMDISK: 37c76000 - 37e33000
[ 0.000000] ACPI: RSDP 00000000000f0410 00024 (v02 Sony)
[ 0.000000] ACPI: XSDT 00000000def1ce18 0005C (v01 Sony VAIO 20100720 MSFT 00010013)
[ 0.000000] ACPI: FACP 00000000def15d98 000F4 (v04 Sony VAIO 20100720 MSFT 00010013)
[ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20110413/tbfadt-369)
[ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0xDEF2DF40/0x00000000DEF30D40, using 32 (20110413/tbfadt-489)
[ 0.000000] ACPI: DSDT 00000000deecd018 0ADBB (v01 Sony VAIO 20100720 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000def2df40 00040
[ 0.000000] ACPI: APIC 00000000def1bf18 0008C (v02 Sony VAIO 20100720 MSFT 00010013)
[ 0.000000] ACPI: MCFG 00000000def2fd18 0003C (v01 Sony VAIO 20100720 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000def2fc98 00038 (v01 Sony VAIO 20100720 MSFT 00000003)
[ 0.000000] ACPI: SLIC 00000000def28a18 00176 (v01 Sony VAIO 20100720 Sony 01000000)
[ 0.000000] ACPI: SSDT 00000000def16018 009F1 (v01 Sony VAIO 20100720 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000def15c18 0014B (v01 Sony VAIO 20100720 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000118000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000118000000
[ 0.000000] NODE_DATA [0000000117ffb000 - 0000000117ffffff]
[ 0.000000] [ffffea0000000000-ffffea0003dfffff] PMD -> [ffff880113800000-ffff880116ffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00118000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000dee74
[ 0.000000] 0: 0x00100000 -> 0x00118000
[ 0.000000] On node 0 totalpages: 1011202
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3921 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 894636 pages, LIFO batch:31
[ 0.000000] Normal zone: 1344 pages used for memmap
[ 0.000000] Normal zone: 96960 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000dee74000 - 00000000deebc000
[ 0.000000] PM: Registered nosave memory: 00000000deebc000 - 00000000deecd000
[ 0.000000] PM: Registered nosave memory: 00000000deecd000 - 00000000deedf000
[ 0.000000] PM: Registered nosave memory: 00000000deedf000 - 00000000deee0000
[ 0.000000] PM: Registered nosave memory: 00000000deee0000 - 00000000deee3000
[ 0.000000] PM: Registered nosave memory: 00000000deee3000 - 00000000def11000
[ 0.000000] PM: Registered nosave memory: 00000000def11000 - 00000000def12000
[ 0.000000] PM: Registered nosave memory: 00000000def12000 - 00000000def15000
[ 0.000000] PM: Registered nosave memory: 00000000def15000 - 00000000def17000
[ 0.000000] PM: Registered nosave memory: 00000000def17000 - 00000000def1b000
[ 0.000000] PM: Registered nosave memory: 00000000def1b000 - 00000000def1e000
[ 0.000000] PM: Registered nosave memory: 00000000def1e000 - 00000000def22000
[ 0.000000] PM: Registered nosave memory: 00000000def22000 - 00000000def31000
[ 0.000000] PM: Registered nosave memory: 00000000def31000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
[ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
[ 0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffa00000
[ 0.000000] PM: Registered nosave memory: 00000000ffa00000 - 00000000ffc00000
[ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:18000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880117c00000 s78464 r8192 d23936 u262144
[ 0.000000] pcpu-alloc: s78464 r8192 d23936 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 995517
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/disk/by-uuid/ea679d77-65a5-4cc3-b46e-286b953789f7 resume=/dev/sda9 ro vga=0x3f0 nomodeset
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3909052k/4587520k available (4064k kernel code, 542712k absent, 135756k reserved, 3304k data, 712k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:2304
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 32505856 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.003333] spurious 8259A interrupt: IRQ7.
[ 0.003333] Detected 2127.784 MHz processor.
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4257.88 BogoMIPS (lpj=7092613)
[ 0.000008] pid_max: default: 32768 minimum: 301
[ 0.000120] Security Framework initialized
[ 0.000125] AppArmor: AppArmor disabled by boot time parameter
[ 0.000524] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001546] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.001968] Mount-cache hash table entries: 256
[ 0.002354] Initializing cgroup subsys cpuacct
[ 0.002387] Initializing cgroup subsys memory
[ 0.002403] Initializing cgroup subsys devices
[ 0.002406] Initializing cgroup subsys freezer
[ 0.002408] Initializing cgroup subsys net_cls
[ 0.002410] Initializing cgroup subsys blkio
[ 0.002461] CPU: Physical Processor ID: 0
[ 0.002462] CPU: Processor Core ID: 0
[ 0.002468] mce: CPU supports 9 MCE banks
[ 0.002478] CPU0: Thermal monitoring handled by SMI
[ 0.002487] using mwait in idle threads.
[ 0.003640] ACPI: Core revision 20110413
[ 0.019108] ftrace: allocating 16144 entries in 64 pages
[ 0.025543] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.058531] CPU0: Intel(R) Core(TM) i3 CPU M 330 @ 2.13GHz stepping 02
[ 0.163154] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
[ 0.163161] ... version: 3
[ 0.163162] ... bit width: 48
[ 0.163164] ... generic registers: 4
[ 0.163165] ... value mask: 0000ffffffffffff
[ 0.163167] ... max period: 000000007fffffff
[ 0.163168] ... fixed-purpose events: 3
[ 0.163169] ... event mask: 000000070000000f
[ 0.183294] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.209823] Booting Node 0, Processors #1
[ 0.209829] smpboot cpu 1: start_ip = 99000
[ 0.303122] CPU1: Thermal monitoring handled by SMI
[ 0.323240] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.343129] #2
[ 0.343133] smpboot cpu 2: start_ip = 99000
[ 0.436405] CPU2: Thermal monitoring handled by SMI
[ 0.456532] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.476405] #3
[ 0.476409] smpboot cpu 3: start_ip = 99000
[ 0.569682] CPU3: Thermal monitoring handled by SMI
[ 0.589820] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.596326] Brought up 4 CPUs
[ 0.596331] Total of 4 processors activated (17030.31 BogoMIPS).
[ 0.598893] devtmpfs: initialized
[ 0.600028] PM: Registering ACPI NVS region at dee74000 (294912 bytes)
[ 0.600036] PM: Registering ACPI NVS region at deecd000 (73728 bytes)
[ 0.600039] PM: Registering ACPI NVS region at deee0000 (12288 bytes)
[ 0.600041] PM: Registering ACPI NVS region at def11000 (4096 bytes)
[ 0.600042] PM: Registering ACPI NVS region at def15000 (8192 bytes)
[ 0.600044] PM: Registering ACPI NVS region at def22000 (61440 bytes)
[ 0.600970] print_constraints: dummy:
[ 0.601050] NET: Registered protocol family 16
[ 0.601156] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.601159] ACPI: bus type pci registered
[ 0.601319] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.601322] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.613921] PCI: Using configuration type 1 for base access
[ 0.614412] bio: create slab <bio-0> at 0
[ 0.616187] ACPI: EC: Look up EC in DSDT
[ 0.626457] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.646350] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.646723] ACPI: SSDT 00000000def1ac18 003AE (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.647118] ACPI: Dynamic OEM Table Load:
[ 0.647121] ACPI: SSDT (null) 003AE (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.647269] ACPI: SSDT 00000000def18018 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.647646] ACPI: Dynamic OEM Table Load:
[ 0.647648] ACPI: SSDT (null) 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.666577] ACPI: SSDT 00000000def19a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.667016] ACPI: Dynamic OEM Table Load:
[ 0.667018] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.676431] ACPI: SSDT 00000000def17d98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.676844] ACPI: Dynamic OEM Table Load:
[ 0.676846] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 1.089727] ACPI: Interpreter enabled
[ 1.089731] ACPI: (supports S0 S3 S4 S5)
[ 1.089754] ACPI: Using IOAPIC for interrupt routing
[ 1.120583] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 1.120814] ACPI: No dock devices found.
[ 1.120815] HEST: Table not found.
[ 1.120818] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.121147] \_SB_.PCI0:_OSC invalid UUID
[ 1.121149] _OSC request data:1 8 1f
[ 1.121153] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 1.121658] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 1.121661] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 1.121663] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 1.121666] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 1.121668] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 1.121670] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 1.121672] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 1.121675] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[ 1.121677] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
[ 1.121679] pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xfeafffff]
[ 1.121692] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
[ 1.121712] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[ 1.121730] pci 0000:00:01.0: [8086:0045] type 1 class 0x000604
[ 1.121757] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.121761] pci 0000:00:01.0: PME# disabled
[ 1.121809] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
[ 1.121841] pci 0000:00:16.0: reg 10: [mem 0xf5e0a000-0xf5e0a00f 64bit]
[ 1.121922] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 1.121927] pci 0000:00:16.0: PME# disabled
[ 1.121966] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
[ 1.121992] pci 0000:00:1a.0: reg 10: [mem 0xf5e08000-0xf5e083ff]
[ 1.122083] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 1.122088] pci 0000:00:1a.0: PME# disabled
[ 1.122118] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
[ 1.122140] pci 0000:00:1b.0: reg 10: [mem 0xf5e00000-0xf5e03fff 64bit]
[ 1.122219] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.122223] pci 0000:00:1b.0: PME# disabled
[ 1.122251] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
[ 1.122332] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.122337] pci 0000:00:1c.0: PME# disabled
[ 1.122366] pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604
[ 1.122446] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 1.122451] pci 0000:00:1c.1: PME# disabled
[ 1.122480] pci 0000:00:1c.2: [8086:3b46] type 1 class 0x000604
[ 1.122560] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 1.122565] pci 0000:00:1c.2: PME# disabled
[ 1.122598] pci 0000:00:1c.5: [8086:3b4c] type 1 class 0x000604
[ 1.122681] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 1.122686] pci 0000:00:1c.5: PME# disabled
[ 1.122723] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
[ 1.122749] pci 0000:00:1d.0: reg 10: [mem 0xf5e07000-0xf5e073ff]
[ 1.122839] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.122844] pci 0000:00:1d.0: PME# disabled
[ 1.122869] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 1.122953] pci 0000:00:1f.0: [8086:3b09] type 0 class 0x000601
[ 1.123075] pci 0000:00:1f.2: [8086:3b29] type 0 class 0x000106
[ 1.123103] pci 0000:00:1f.2: reg 10: [io 0xe070-0xe077]
[ 1.123114] pci 0000:00:1f.2: reg 14: [io 0xe060-0xe063]
[ 1.123126] pci 0000:00:1f.2: reg 18: [io 0xe050-0xe057]
[ 1.123137] pci 0000:00:1f.2: reg 1c: [io 0xe040-0xe043]
[ 1.123149] pci 0000:00:1f.2: reg 20: [io 0xe020-0xe03f]
[ 1.123161] pci 0000:00:1f.2: reg 24: [mem 0xf5e06000-0xf5e067ff]
[ 1.123209] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.123214] pci 0000:00:1f.2: PME# disabled
[ 1.123237] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
[ 1.123259] pci 0000:00:1f.3: reg 10: [mem 0xf5e05000-0xf5e050ff 64bit]
[ 1.123290] pci 0000:00:1f.3: reg 20: [io 0xe000-0xe01f]
[ 1.123360] pci 0000:01:00.0: [1002:68e0] type 0 class 0x000300
[ 1.123380] pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 1.123394] pci 0000:01:00.0: reg 18: [mem 0xf0020000-0xf003ffff 64bit]
[ 1.123405] pci 0000:01:00.0: reg 20: [io 0xd000-0xd0ff]
[ 1.123424] pci 0000:01:00.0: reg 30: [mem 0xf0000000-0xf001ffff pref]
[ 1.123443] pci 0000:01:00.0: supports D1 D2
[ 1.123468] pci 0000:01:00.1: [1002:aa68] type 0 class 0x000403
[ 1.123487] pci 0000:01:00.1: reg 10: [mem 0xf0040000-0xf0043fff 64bit]
[ 1.123555] pci 0000:01:00.1: supports D1 D2
[ 1.123579] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.123582] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 1.123585] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf00fffff]
[ 1.123589] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.123667] pci 0000:02:00.0: [168c:002b] type 0 class 0x000280
[ 1.123693] pci 0000:02:00.0: reg 10: [mem 0xf4a00000-0xf4a0ffff 64bit]
[ 1.123783] pci 0000:02:00.0: supports D1
[ 1.123785] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[ 1.123790] pci 0000:02:00.0: PME# disabled
[ 1.123824] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 1.123829] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
[ 1.123834] pci 0000:00:1c.0: bridge window [mem 0xf4a00000-0xf5dfffff]
[ 1.123842] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.123953] pci 0000:03:00.0: [1180:e822] type 0 class 0x000805
[ 1.123976] pci 0000:03:00.0: reg 10: [mem 0xf3602000-0xf36020ff]
[ 1.124115] pci 0000:03:00.0: supports D1 D2
[ 1.124117] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.124123] pci 0000:03:00.0: PME# disabled
[ 1.124175] pci 0000:03:00.1: [1180:e230] type 0 class 0x000880
[ 1.124198] pci 0000:03:00.1: reg 10: [mem 0xf3601000-0xf36010ff]
[ 1.124336] pci 0000:03:00.1: supports D1 D2
[ 1.124338] pci 0000:03:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.124344] pci 0000:03:00.1: PME# disabled
[ 1.124394] pci 0000:03:00.4: [1180:e822] type 0 class 0x000805
[ 1.124418] pci 0000:03:00.4: reg 10: [mem 0xf3600000-0xf36000ff]
[ 1.124554] pci 0000:03:00.4: supports D1 D2
[ 1.124556] pci 0000:03:00.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.124562] pci 0000:03:00.4: PME# disabled
[ 1.124630] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 1.124635] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
[ 1.124640] pci 0000:00:1c.1: bridge window [mem 0xf3600000-0xf49fffff]
[ 1.124648] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.124886] pci 0000:04:00.0: [11ab:4381] type 0 class 0x000200
[ 1.125105] pci 0000:04:00.0: reg 10: [mem 0xf2220000-0xf2223fff 64bit]
[ 1.125212] pci 0000:04:00.0: reg 18: [io 0xa000-0xa0ff]
[ 1.125642] pci 0000:04:00.0: reg 30: [mem 0xf2200000-0xf221ffff pref]
[ 1.125967] pci 0000:04:00.0: supports D1 D2
[ 1.125968] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.126008] pci 0000:04:00.0: PME# disabled
[ 1.126269] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[ 1.126274] pci 0000:00:1c.2: bridge window [io 0xa000-0xafff]
[ 1.126279] pci 0000:00:1c.2: bridge window [mem 0xf2200000-0xf35fffff]
[ 1.126287] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.126344] pci 0000:00:1c.5: PCI bridge to [bus 05-0c]
[ 1.126348] pci 0000:00:1c.5: bridge window [io 0x9000-0x9fff]
[ 1.126353] pci 0000:00:1c.5: bridge window [mem 0xf0200000-0xf21fffff]
[ 1.126361] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.126438] pci 0000:00:1e.0: PCI bridge to [bus 0d-0d] (subtractive decode)
[ 1.126443] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.126448] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.126456] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.126459] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 1.126461] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 1.126463] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 1.126466] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 1.126468] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 1.126470] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 1.126473] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 1.126475] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 1.126478] pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 1.126480] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode)
[ 1.126515] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.126656] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 1.126708] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 1.126765] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 1.126833] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 1.126882] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 1.126997] \_SB_.PCI0:_OSC invalid UUID
[ 1.126998] _OSC request data:1 1f 1f
[ 1.127003] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 1.127035] \_SB_.PCI0:_OSC invalid UUID
[ 1.127037] _OSC request data:1 0 1d
[ 1.127041] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[ 1.127042] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 1.130982] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 3f])
[ 1.131046] pci 0000:3f:00.0: [8086:2c62] type 0 class 0x000600
[ 1.131066] pci 0000:3f:00.1: [8086:2d01] type 0 class 0x000600
[ 1.131087] pci 0000:3f:02.0: [8086:2d10] type 0 class 0x000600
[ 1.131107] pci 0000:3f:02.1: [8086:2d11] type 0 class 0x000600
[ 1.131125] pci 0000:3f:02.2: [8086:2d12] type 0 class 0x000600
[ 1.131143] pci 0000:3f:02.3: [8086:2d13] type 0 class 0x000600
[ 1.131176] pci0000:3f: Requesting ACPI _OSC control (0x1d)
[ 1.131179] pci0000:3f: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 1.131181] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 1.131415] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 1.131460] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 1.131503] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 *4 5 6 7 10 12 14 15)
[ 1.131546] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 1.131588] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 1.131636] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 1.131679] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[ 1.131722] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 1.131820] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.131826] vgaarb: loaded
[ 1.131827] vgaarb: bridge control possible 0000:01:00.0
[ 1.131900] PCI: Using ACPI for IRQ routing
[ 1.134142] PCI: pci_cache_line_size set to 64 bytes
[ 1.134246] reserve RAM buffer: 000000000009e800 - 000000000009ffff
[ 1.134248] reserve RAM buffer: 00000000dee74000 - 00000000dfffffff
[ 1.134372] NetLabel: Initializing
[ 1.134374] NetLabel: domain hash size = 128
[ 1.134375] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.134389] NetLabel: unlabeled traffic allowed by default
[ 1.134412] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.134418] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.136441] Switching to clocksource hpet
[ 1.139456] Switched to NOHz mode on CPU #0
[ 1.139583] Switched to NOHz mode on CPU #1
[ 1.139590] Switched to NOHz mode on CPU #2
[ 1.139598] Switched to NOHz mode on CPU #3
[ 1.142357] pnp: PnP ACPI init
[ 1.142375] ACPI: bus type pnp registered
[ 1.142679] pnp 00:00: [bus 00-3e]
[ 1.142682] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 1.142684] pnp 00:00: [io 0x0cf8-0x0cff]
[ 1.142686] pnp 00:00: [io 0x0d00-0xffff window]
[ 1.142689] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 1.142691] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 1.142693] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 1.142695] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 1.142697] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 1.142699] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 1.142700] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 1.142702] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 1.142707] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 1.142709] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 1.142711] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 1.142713] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 1.142715] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 1.142716] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 1.142718] pnp 00:00: [mem 0xe0000000-0xfeafffff window]
[ 1.142826] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 1.142841] pnp 00:01: [io 0x0000-0x001f]
[ 1.142843] pnp 00:01: [io 0x0081-0x0091]
[ 1.142844] pnp 00:01: [io 0x0093-0x009f]
[ 1.142846] pnp 00:01: [io 0x00c0-0x00df]
[ 1.142848] pnp 00:01: [dma 4]
[ 1.142872] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.142880] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 1.142901] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 1.142976] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 1.142999] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.143008] pnp 00:04: [io 0x00f0]
[ 1.143019] pnp 00:04: [irq 13]
[ 1.143044] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.143054] pnp 00:05: [io 0x002e-0x002f]
[ 1.143056] pnp 00:05: [io 0x004e-0x004f]
[ 1.143057] pnp 00:05: [io 0x0061]
[ 1.143059] pnp 00:05: [io 0x0063]
[ 1.143061] pnp 00:05: [io 0x0065]
[ 1.143062] pnp 00:05: [io 0x0067]
[ 1.143064] pnp 00:05: [io 0x0070]
[ 1.143065] pnp 00:05: [io 0x0080]
[ 1.143066] pnp 00:05: [io 0x0092]
[ 1.143068] pnp 00:05: [io 0x00b2-0x00b3]
[ 1.143070] pnp 00:05: [io 0x0680-0x069f]
[ 1.143072] pnp 00:05: [io 0xff00-0xff0f]
[ 1.143073] pnp 00:05: [io 0xff10-0xff13]
[ 1.143075] pnp 00:05: [io 0x0800-0x0803]
[ 1.143076] pnp 00:05: [io 0x0400-0x047f]
[ 1.143078] pnp 00:05: [io 0x0500-0x057f]
[ 1.143080] pnp 00:05: [io 0x164e-0x164f]
[ 1.143140] system 00:05: [io 0x0680-0x069f] has been reserved
[ 1.143143] system 00:05: [io 0xff00-0xff0f] has been reserved
[ 1.143145] system 00:05: [io 0xff10-0xff13] has been reserved
[ 1.143148] system 00:05: [io 0x0800-0x0803] has been reserved
[ 1.143150] system 00:05: [io 0x0400-0x047f] has been reserved
[ 1.143152] system 00:05: [io 0x0500-0x057f] has been reserved
[ 1.143154] system 00:05: [io 0x164e-0x164f] has been reserved
[ 1.143157] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.143166] pnp 00:06: [io 0x0070-0x0077]
[ 1.143171] pnp 00:06: [irq 8]
[ 1.143208] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.143218] pnp 00:07: [io 0x0060]
[ 1.143220] pnp 00:07: [io 0x0064]
[ 1.143225] pnp 00:07: [irq 1]
[ 1.143250] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 1.143262] pnp 00:08: [irq 12]
[ 1.143288] pnp 00:08: Plug and Play ACPI device, IDs SNY9011 PNP0f13 (active)
[ 1.143642] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
[ 1.143644] pnp 00:09: [mem 0xfed10000-0xfed13fff]
[ 1.143646] pnp 00:09: [mem 0xfed18000-0xfed18fff]
[ 1.143650] pnp 00:09: [mem 0xfed19000-0xfed19fff]
[ 1.143651] pnp 00:09: [mem 0xf8000000-0xfbffffff]
[ 1.143653] pnp 00:09: [mem 0xfed20000-0xfed3ffff]
[ 1.143655] pnp 00:09: [mem 0xfed90000-0xfed8ffff disabled]
[ 1.143657] pnp 00:09: [mem 0xfed45000-0xfed8ffff]
[ 1.143659] pnp 00:09: [mem 0xff000000-0xffffffff]
[ 1.143661] pnp 00:09: [mem 0xfee00000-0xfeefffff]
[ 1.143663] pnp 00:09: [mem 0xf5e0b000-0xf5e0bfff]
[ 1.143733] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.143736] system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved
[ 1.143739] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.143741] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.143744] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
[ 1.143746] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.143749] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 1.143751] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[ 1.143754] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.143757] system 00:09: [mem 0xf5e0b000-0xf5e0bfff] has been reserved
[ 1.143760] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.143900] pnp 00:0a: [bus 3f]
[ 1.143951] pnp 00:0a: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 1.157077] pnp: PnP ACPI: found 11 devices
[ 1.157079] ACPI: ACPI bus type pnp unregistered
[ 1.163064] PCI: max bus depth: 1 pci_try_num: 2
[ 1.163124] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf5f00000-0xf60fffff 64bit pref]
[ 1.163130] pci 0000:00:1c.2: BAR 15: assigned [mem 0xf6100000-0xf62fffff 64bit pref]
[ 1.163135] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf6300000-0xf64fffff 64bit pref]
[ 1.163140] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf6500000-0xf66fffff 64bit pref]
[ 1.163143] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.163146] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 1.163149] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf00fffff]
[ 1.163152] pci 0000:00:01.0: bridge window [mem pref disabled]
[ 1.163156] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 1.163159] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
[ 1.163166] pci 0000:00:1c.0: bridge window [mem 0xf4a00000-0xf5dfffff]
[ 1.163171] pci 0000:00:1c.0: bridge window [mem 0xf6500000-0xf66fffff 64bit pref]
[ 1.163191] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 1.163195] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
[ 1.163202] pci 0000:00:1c.1: bridge window [mem 0xf3600000-0xf49fffff]
[ 1.163207] pci 0000:00:1c.1: bridge window [mem 0xf6300000-0xf64fffff 64bit pref]
[ 1.163215] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[ 1.163219] pci 0000:00:1c.2: bridge window [io 0xa000-0xafff]
[ 1.163225] pci 0000:00:1c.2: bridge window [mem 0xf2200000-0xf35fffff]
[ 1.163230] pci 0000:00:1c.2: bridge window [mem 0xf6100000-0xf62fffff 64bit pref]
[ 1.163238] pci 0000:00:1c.5: PCI bridge to [bus 05-0c]
[ 1.163242] pci 0000:00:1c.5: bridge window [io 0x9000-0x9fff]
[ 1.163248] pci 0000:00:1c.5: bridge window [mem 0xf0200000-0xf21fffff]
[ 1.163253] pci 0000:00:1c.5: bridge window [mem 0xf5f00000-0xf60fffff 64bit pref]
[ 1.163262] pci 0000:00:1e.0: PCI bridge to [bus 0d-0d]
[ 1.163263] pci 0000:00:1e.0: bridge window [io disabled]
[ 1.163269] pci 0000:00:1e.0: bridge window [mem disabled]
[ 1.163274] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 1.163293] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.163296] pci 0000:00:01.0: setting latency timer to 64
[ 1.163303] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.163308] pci 0000:00:1c.0: setting latency timer to 64
[ 1.163318] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.163323] pci 0000:00:1c.1: setting latency timer to 64
[ 1.163333] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.163338] pci 0000:00:1c.2: setting latency timer to 64
[ 1.163345] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.163350] pci 0000:00:1c.5: setting latency timer to 64
[ 1.163359] pci 0000:00:1e.0: setting latency timer to 64
[ 1.163363] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.163366] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.163368] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.163370] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 1.163372] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 1.163374] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 1.163376] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 1.163378] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[ 1.163380] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[ 1.163383] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff]
[ 1.163385] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 1.163387] pci_bus 0000:01: resource 1 [mem 0xe0000000-0xf00fffff]
[ 1.163389] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
[ 1.163391] pci_bus 0000:02: resource 1 [mem 0xf4a00000-0xf5dfffff]
[ 1.163394] pci_bus 0000:02: resource 2 [mem 0xf6500000-0xf66fffff 64bit pref]
[ 1.163396] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
[ 1.163398] pci_bus 0000:03: resource 1 [mem 0xf3600000-0xf49fffff]
[ 1.163400] pci_bus 0000:03: resource 2 [mem 0xf6300000-0xf64fffff 64bit pref]
[ 1.163403] pci_bus 0000:04: resource 0 [io 0xa000-0xafff]
[ 1.163405] pci_bus 0000:04: resource 1 [mem 0xf2200000-0xf35fffff]
[ 1.163407] pci_bus 0000:04: resource 2 [mem 0xf6100000-0xf62fffff 64bit pref]
[ 1.163409] pci_bus 0000:05: resource 0 [io 0x9000-0x9fff]
[ 1.163411] pci_bus 0000:05: resource 1 [mem 0xf0200000-0xf21fffff]
[ 1.163414] pci_bus 0000:05: resource 2 [mem 0xf5f00000-0xf60fffff 64bit pref]
[ 1.163416] pci_bus 0000:0d: resource 4 [io 0x0000-0x0cf7]
[ 1.163418] pci_bus 0000:0d: resource 5 [io 0x0d00-0xffff]
[ 1.163420] pci_bus 0000:0d: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.163422] pci_bus 0000:0d: resource 7 [mem 0x000d0000-0x000d3fff]
[ 1.163424] pci_bus 0000:0d: resource 8 [mem 0x000d4000-0x000d7fff]
[ 1.163426] pci_bus 0000:0d: resource 9 [mem 0x000d8000-0x000dbfff]
[ 1.163428] pci_bus 0000:0d: resource 10 [mem 0x000dc000-0x000dffff]
[ 1.163431] pci_bus 0000:0d: resource 11 [mem 0x000e0000-0x000e3fff]
[ 1.163433] pci_bus 0000:0d: resource 12 [mem 0x000e4000-0x000e7fff]
[ 1.163435] pci_bus 0000:0d: resource 13 [mem 0xe0000000-0xfeafffff]
[ 1.163511] NET: Registered protocol family 2
[ 1.163700] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.164727] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.167663] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.168014] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.168016] TCP reno registered
[ 1.168027] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.168066] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.168344] NET: Registered protocol family 1
[ 2.499376] pci 0000:00:1a.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 3.832221] pci 0000:00:1d.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 3.832352] pci 0000:01:00.0: Boot video device
[ 3.832384] PCI: CLS 64 bytes, default 64
[ 3.832433] Unpacking initramfs...
[ 3.861003] Freeing initrd memory: 1780k freed
[ 3.861298] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 3.861302] Placing 64MB software IO TLB between ffff8800dae6e000 - ffff8800dee6e000
[ 3.861304] software IO TLB at phys 0xdae6e000 - 0xdee6e000
[ 3.861787] audit: initializing netlink socket (disabled)
[ 3.861799] type=2000 audit(1313594250.696:1): initialized
[ 3.869728] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 3.886559] VFS: Disk quotas dquot_6.5.2
[ 3.886700] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 3.886869] msgmni has been set to 7638
[ 3.887107] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 3.887147] io scheduler noop registered
[ 3.887150] io scheduler deadline registered
[ 3.887202] io scheduler cfq registered (default)
[ 3.887320] pcieport 0000:00:01.0: setting latency timer to 64
[ 3.887348] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 3.887672] vesafb: mode is 1600x900x32, linelength=6400, pages=1
[ 3.887674] vesafb: scrolling: redraw
[ 3.887677] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 3.890141] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005100000, using 11250k, total 16384k
[ 4.087472] Console: switching to colour frame buffer device 200x56
[ 4.281840] fb0: VESA VGA frame buffer device
[ 4.281854] intel_idle: MWAIT substates: 0x1120
[ 4.281856] intel_idle: v0.4 model 0x25
[ 4.281857] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 4.281902] ERST: Table is not found!
[ 4.281955] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 4.469026] Linux agpgart interface v0.103
[ 4.469114] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 4.473482] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.473514] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 4.473591] mousedev: PS/2 mouse device common for all mice
[ 4.473653] rtc_cmos 00:06: RTC can wake from S4
[ 4.473761] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 4.473791] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 4.473886] cpuidle: using governor ladder
[ 4.474031] cpuidle: using governor menu
[ 4.474245] TCP cubic registered
[ 4.474248] NET: Registered protocol family 17
[ 4.474257] Registering the dns_resolver key type
[ 4.474353] PM: Checking hibernation image partition /dev/sda9
[ 4.496169] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 4.502184] PM: Hibernation image not present or could not be loaded.
[ 4.502194] registered taskstats version 1
[ 4.512403] rtc_cmos 00:06: setting system clock to 2011-08-17 15:17:31 UTC (1313594251)
[ 4.512569] Initializing network drop monitor service
[ 4.516031] Freeing unused kernel memory: 712k freed
[ 4.516201] Write protecting the kernel read-only data: 6144k
[ 4.516747] Freeing unused kernel memory: 12k freed
[ 4.522858] Freeing unused kernel memory: 776k freed
[ 4.564188] udevd[93]: starting version 173
[ 4.566281] ACPI: acpi_idle yielding to intel_idle
[ 4.624591] SCSI subsystem initialized
[ 4.630767] libata version 3.00 loaded.
[ 4.632419] ahci 0000:00:1f.2: version 3.0
[ 4.632443] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 4.632515] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 4.632554] ahci: SSS flag set, parallel bus scan disabled
[ 4.632606] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 4.632610] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part sxs apst
[ 4.632616] ahci 0000:00:1f.2: setting latency timer to 64
[ 4.634910] scsi0 : ahci
[ 4.635536] scsi1 : ahci
[ 4.636083] scsi2 : ahci
[ 4.636721] scsi3 : ahci
[ 4.637168] scsi4 : ahci
[ 4.637475] scsi5 : ahci
[ 4.637727] ata1: SATA max UDMA/133 abar m2048@0xf5e06000 port 0xf5e06100 irq 41
[ 4.637731] ata2: SATA max UDMA/133 abar m2048@0xf5e06000 port 0xf5e06180 irq 41
[ 4.637733] ata3: DUMMY
[ 4.637734] ata4: DUMMY
[ 4.637737] ata5: SATA max UDMA/133 abar m2048@0xf5e06000 port 0xf5e06300 irq 41
[ 4.637741] ata6: SATA max UDMA/133 abar m2048@0xf5e06000 port 0xf5e06380 irq 41
[ 4.861932] Refined TSC clocksource calibration: 2128.123 MHz.
[ 4.861939] Switching to clocksource tsc
[ 4.955224] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.965120] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 4.965397] ata1.00: ATA-8: SAMSUNG HM500JI, 2AC101C4, max UDMA/133
[ 4.965402] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 4.975403] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 4.975693] ata1.00: configured for UDMA/133
[ 4.976014] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM500JI 2AC1 PQ: 0 ANSI: 5
[ 5.295101] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.296935] ata2.00: ATAPI: Optiarc DVD RW AD-7700H, 1.V0, max UDMA/100
[ 5.303748] ata2.00: configured for UDMA/100
[ 5.319899] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7700H 1.V0 PQ: 0 ANSI: 5
[ 5.638306] ata5: SATA link down (SStatus 0 SControl 300)
[ 5.958189] ata6: SATA link down (SStatus 0 SControl 300)
[ 5.964558] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 5.964596] sd 0:0:0:0: [sda] Write Protect is off
[ 5.964599] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.964614] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.073618] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 >
[ 6.074200] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.091859] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.091865] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 6.092089] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 7.960526] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 9.667393] udevd[273]: starting version 173
[ 10.439749] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 10.447052] ACPI: Lid Switch [LID0]
[ 10.449942] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 10.449952] ACPI: Power Button [PWRB]
[ 10.463109] [Firmware Bug]: ACPI(VGA) defines _DOD but not _DOS
[ 10.484243] acpi device:4b: registered as cooling_device4
[ 10.484911] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:4a/LNXVIDEO:01/input/input3
[ 10.484921] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 10.494126] thermal LNXTHERM:00: registered as thermal_zone0
[ 10.494129] ACPI: Thermal Zone [TZ00] (58 C)
[ 10.506259] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 10.506267] ACPI: Battery Slot [BAT0] (battery present)
[ 10.517446] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 10.524583] thermal LNXTHERM:01: registered as thermal_zone1
[ 10.524586] ACPI: Thermal Zone [TZ01] (58 C)
[ 10.530700] ACPI: AC Adapter [ADP1] (off-line)
[ 10.648271] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 10.773153] iTCO_vendor_support: vendor-support=0
[ 10.924548] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 10.924706] iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
[ 10.924868] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 10.926971] sky2: driver version 1.28
[ 10.927036] sky2 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 10.927049] sky2 0000:04:00.0: setting latency timer to 64
[ 10.927089] sky2 0000:04:00.0: Yukon-2 Optima chip revision 1
[ 10.927203] sky2 0000:04:00.0: irq 42 for MSI/MSI-X
[ 10.927532] sky2 0000:04:00.0: eth0: addr 54:42:49:10:6d:46
[ 11.021491] cfg80211: Calling CRDA to update world regulatory domain
[ 11.030984] usbcore: registered new interface driver usbfs
[ 11.031163] usbcore: registered new interface driver hub
[ 11.031208] usbcore: registered new device driver usb
[ 11.054022] sony_laptop: Sony Notebook Control Driver v0.6
[ 11.064072] input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/SNY5001:00/input/input5
[ 11.064128] input: Sony Vaio Jogdial as /devices/virtual/input/input6
[ 11.064240] sony_laptop: brightness ignored, must be controlled by ACPI video driver
[ 11.268875] mei: module is from the staging directory, the quality is unknown, you have been warned.
[ 11.269169] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 11.269177] mei 0000:00:16.0: setting latency timer to 64
[ 11.304449] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 11.319698] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 11.319743] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 11.354358] sdhci: Secure Digital Host Controller Interface driver
[ 11.354362] sdhci: Copyright(c) Pierre Ossman
[ 11.374472] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 11.374519] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 11.374559] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 11.374564] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 11.374590] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 11.374630] ehci_hcd 0000:00:1a.0: debug port 2
[ 11.378526] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 11.378534] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf5e08000
[ 11.389468] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 11.389714] hub 1-0:1.0: USB hub found
[ 11.389721] hub 1-0:1.0: 2 ports detected
[ 11.389823] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 11.389872] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 11.389877] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 11.389894] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 11.389929] ehci_hcd 0000:00:1d.0: debug port 2
[ 11.393814] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 11.393838] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf5e07000
[ 11.406179] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 11.406377] hub 2-0:1.0: USB hub found
[ 11.406382] hub 2-0:1.0: 2 ports detected
[ 11.514999] sdhci-pci 0000:03:00.0: SDHCI controller found [1180:e822] (rev 0)
[ 11.515023] sdhci-pci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 11.515072] sdhci-pci 0000:03:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 11.515081] sdhci-pci 0000:03:00.0: setting latency timer to 64
[ 11.515108] _regulator_get: 0000:03:00.0 supply vmmc not found, using dummy regulator
[ 11.515145] Registered led device: mmc0::
[ 11.515206] mmc0: SDHCI controller on PCI [0000:03:00.0] using DMA
[ 11.515222] sdhci-pci 0000:03:00.4: SDHCI controller found [1180:e822] (rev 0)
[ 11.515237] sdhci-pci 0000:03:00.4: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 11.515253] sdhci-pci 0000:03:00.4: Will use DMA mode even though HW doesn't fully claim to support it.
[ 11.515261] sdhci-pci 0000:03:00.4: setting latency timer to 64
[ 11.515278] _regulator_get: 0000:03:00.4 supply vmmc not found, using dummy regulator
[ 11.515308] Registered led device: mmc1::
[ 11.515344] mmc1: SDHCI controller on PCI [0000:03:00.4] using DMA
[ 11.696095] usb 1-1: new high speed USB device number 2 using ehci_hcd
[ 11.800486] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input7
[ 11.823379] hub 1-1:1.0: USB hub found
[ 11.823555] hub 1-1:1.0: 6 ports detected
[ 11.881300] ath9k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 11.881313] ath9k 0000:02:00.0: setting latency timer to 64
[ 11.899363] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 11.899454] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 11.899494] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 11.929270] usb 2-1: new high speed USB device number 2 using ehci_hcd
[ 11.931327] ath: EEPROM regdomain: 0x65
[ 11.931329] ath: EEPROM indicates we should expect a direct regpair map
[ 11.931333] ath: Country alpha2 being used: 00
[ 11.931334] ath: Regpair used: 0x65
[ 12.053537] hub 2-1:1.0: USB hub found
[ 12.053638] hub 2-1:1.0: 8 ports detected
[ 12.058338] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 12.058344] Disabling lock debugging due to kernel taint
[ 12.089898] [fglrx] Maximum main memory to use for locked dma buffers: 3660 MBytes.
[ 12.090143] [fglrx] vendor: 1002 device: 68e0 count: 1
[ 12.090556] [fglrx] ioport: bar 4, base 0xd000, size: 0x100
[ 12.090572] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 12.090577] pci 0000:01:00.0: setting latency timer to 64
[ 12.090779] [fglrx] Kernel PAT support is enabled
[ 12.090802] [fglrx] module loaded - fglrx 8.87.5 [Jul 7 2011] with 1 minors
[ 12.101099] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 12.101452] Registered led device: ath9k-phy0
[ 12.101460] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90005d00000, irq=16
[ 12.115758] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 12.117699] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 12.117756] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 12.117877] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 12.117956] HDA Intel 0000:01:00.1: irq 44 for MSI/MSI-X
[ 12.117979] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 12.132761] usb 1-1.2: new full speed USB device number 3 using ehci_hcd
[ 12.168259] HDMI status: Pin=3 Presence_Detect=0 ELD_Valid=0
[ 12.168639] input: HD-Audio Generic HDMI/DP as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[ 12.265962] usb 1-1.2: new high speed USB device number 4 using ehci_hcd
[ 12.387463] cfg80211: World regulatory domain updated:
[ 12.387466] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.387469] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.387472] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.387474] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.387477] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.387479] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.387493] cfg80211: Calling CRDA for country: IT
[ 12.390329] cfg80211: Regulatory domain changed to country: IT
[ 12.390332] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.390334] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 12.390337] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 12.390339] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 12.390341] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 12.462672] usb 2-1.2: new low speed USB device number 3 using ehci_hcd
[ 12.939879] Linux media interface: v0.10
[ 12.994380] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input12
[ 12.994487] generic-usb 0003:15D9:0A4C.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.2/input0
[ 12.994502] usbcore: registered new interface driver usbhid
[ 12.994504] usbhid: USB HID core driver
[ 13.030968] Linux video capture interface: v2.00
[ 13.053392] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (064e:a213)
[ 13.060994] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input13
[ 13.061057] usbcore: registered new interface driver uvcvideo
[ 13.061059] USB Video Class driver (v1.1.0)
[ 15.202804] EXT4-fs (sda7): re-mounted. Opts: (null)
[ 15.503756] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 15.505206] SGI XFS Quota Management subsystem
[ 15.527846] XFS (sda10): Mounting Filesystem
[ 16.058466] XFS (sda10): Ending clean mount
[ 16.172238] REISERFS (device sda8): found reiserfs format "3.6" with standard journal
[ 16.172257] REISERFS (device sda8): using ordered data mode
[ 16.180082] REISERFS (device sda8): journal params: device sda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 16.180470] REISERFS (device sda8): checking transaction log (sda8)
[ 16.225092] REISERFS (device sda8): Using r5 hash to sort names
[ 16.362086] EXT3-fs: barriers not enabled
[ 16.377355] kjournald starting. Commit interval 5 seconds
[ 16.377554] EXT3-fs (sda6): using internal journal
[ 16.377560] EXT3-fs (sda6): mounted filesystem with ordered data mode
[ 16.475339] fuse init (API version 7.16)
[ 17.345752] Adding 1052220k swap on /dev/sda9. Priority:-1 extents:1 across:1052220k
Last edited by TheImmortalPhoenix (2011-08-17 13:23:54)

Tvtime not working after upgrading to kernel-2.6.31-1 (Solved)

Hello friends,
When I am using kernel-2.6.30.8 it was everything ok with my system. tvtime has been working with least cpu utilization then. But after upgrading to kernel-2.6.31-1 I got following error messages when trying to open tvtime
damu@station210 ~]$ tvtime
Running tvtime 1.0.2.
Reading configuration from /etc/tvtime/tvtime.xml
Reading configuration from /home/damu/.tvtime/tvtime.xml
xvoutput: No XVIDEO port found which supports YUY2 images.
*** tvtime requires hardware YUY2 overlay support from your video card
*** driver. If you are using an older NVIDIA card (TNT2), then
*** this capability is only available with their binary drivers.
*** For some ATI cards, this feature may be found in the experimental
*** GATOS drivers: http://gatos.souceforge.net/
*** If unsure, please check with your distribution to see if your
*** X driver supports hardware overlay surfaces.
What happened to driver and kernel? any way to go back to previous kernel version?
Requesting help! Thanks
Last edited by mvdvarrier (2009-10-14 06:26:14)

Perry3D wrote:
Are you using the xf86-video-ati/radeonhd driver?
Try disabling KMS by appending nomodeset to the kernel parameters. At the moment kms ist not usable without upgrading some libs (mesa?, libdrm?). Search the forums for kms to get more information.
Thanks Perry3D
I disabled KMS as per http://wiki.archlinux.org/index.php/ATI. Now tvtime is working great. With the release of kernel 2.6.32 KMS can be enabled for ati card with radeon3200 chips
mvdvarrier

Mac pro cannot boot after upgrade to 10.8.3

My Mac Pro cannot boot after upgrade to 10.8.3. Anything firmware I can reset or how should I do.
I am using a early 2008 Mac Pro

Can you boot into safe mode? http://support.apple.com/kb/ht1455
If not, how about Recovery? http://support.apple.com/kb/ht4718
If you can, run Disk Utlity and repair the disk. You can try rebooting normally, but I would just reinstall after quitting Disk Utility.

For Those Who Can't Boot After Upgrading To 10.5.6

For Those Who Can't Boot After Upgrading To 10.5.6
(and i am one of those)
how is Apple supposed to make them able to install future fixes and updates
once they finally acknowledge and address this horrible bug?
will they send free bootable CDs with the updates to 10.5.6?

What "Boot ROM version" do you have (check in the system profiler under "Hardware")? If it's not MBP31.0070.B07 or MBP21.00A5.B08, then you will need to update your MacBook Pro's firmware. To do this, you might need to connect an external display and mouse/keyboard, and then run the computer with the lid closed to bypass the laptop's monitor. Then apply the firmware patch and reboot the system. This might also be doable via "Screen Sharing" if you have that enabled and have another mac handy.
The firmware update is here: http://www.apple.com/downloads/macosx/apple/firmware_hardware/macbookproefifirmw areupdate151.html
Message was edited by: Topher Kessler

Issue after upgrading SOLMAN-Kernel to 700-201

Hi Gurus,
I have upgraded SOLMAN Kernel from 700-144 to 700-201. I have done step by step upgrade i.e.,
700-147 to 700-175 - No issues
700-175 to 700-201 - Server started partially.
In the Console, the server is partially started after upgrading from 175 to 201(Yellow and Green).
"Dispatcher Running but not connected to Message Server, J2EE: All processes running"
I am able to login to all clients as well as J2EE.
are there any patch or any OSS notes to implement after upgrading to Kernel 700-201?
SOLMAN:
SP-17
WIN-32
Thanks in advance...
Regards
Shreeshail Ganiger

Dear Shreeshail,
Try to upgrade your kernel to 221, there are quite issues with 201for some installations.
Check if your satstartsrv.exe has been updated with new version too. this you can check with file version by right clicking.
Regards
Shailesh

Windows hangs boot after upgrading any software

Hi,
My Windows 8 Pro x64 Dell XPS8500 machine developed a really weird problem. (The problem actually began a while back - first noticed maybe 4-6 month ago - but only now trying to fix it.) It re/boots fine so long as I don't try to install anything.
However, installing any software upgrades causes Windows to hang on boot. The software upgrades that I tried are Evernote, iTunes, Java VM, and all of them are triggering the same behavior. All this aforementioned software seeming doesn't have
anything in common. The only known upgrades that do not appear to trigger the issue are Firefox and Chrome (where upgrades happen more or less in passive fashion) There is no clear event that I can recall in the past that I can attribute this happening
to (i.e. I can't pin point to something like installing a driving and it failing immediately afterwards) - just one day a message popped up to upgrade iTunes, which I did, and then rebooted to experience the issue.
Here are the steps to describe what happens with a bit more detail and troubleshooting steps tried:
Manually launch upgrade of an existing software. (Tried Evernote, iTunes, Java VM)
Successfully go through the install/upgrade. Seems irrelevant if software asks for reboot or not. Machine works fine until rebooted.
Reboot the machine. Machine shuts down without any issues.
BIOS POST is successful, and Dell logo with jumping/circulating dots comes up.
There is a normal flurry of hard-disk activity for a few seconds, which after a few seconds reduces to none or sometimes/occasionally to very brief flashing a few seconds apart. This is where the problem is noticed. It can stay like that for
hours if not days (normal boot takes about 20-30 seconds).
Typically, if there is no hard-disk activity at all, pressing the power button causes one brief flash, followed by one more about 1-3 seconds later, and no change.
The only recourse is to force turn off by holding power button for few seconds.
Letting it try to boot again leads to the same behavior.
Repeating attempts to boot 3-4 times causes Automatic Recovery to kick in.
The only way to get the machine to boot again is to use Recovery to restore to a previous state. This sometimes requires to be done more than once and doesn't fix on the first try.
(Also, I enabled Win boot menu, and couple of times instead of waiting for Automatic Recovery to kick in, tried to use recovery through the menu - in that case it's more likely to require the procedure to be done more than once).
I tried to do a logged boot to capture log file in one of the cases where it boots - it appears to never produce \Windows\ntbtlog.txt file (possible I didn't do something right for this one, though I thought that file is never deleted and only grows)
Additional Info: SysRestore currently displays only two available points:
6/13/14 - Installed Evernote v. 5.4 - Type Install
6/9/14 - Automatic Restore Point - Type System
All other previous restore points (from having installed a few more updates and software in the 1.5 years I had the machine) are gone somewhere.
Choosing to revert to the second restore point (when selecting restore point from boot menu) as opposed to the first one and later booting successfully, for some reason the same restore points are listed again (so it doesn't seem to be truly reverting)
Nothing fruitful appears in the EventLog. The only critical messages that i see there are both from SCM and one reads "The Dell Digital Delivery Service service terminated unexpectedly. It has done this 1 time(s)." and the other "The
system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly." (which is expected). And there is a warn level entry about some Bluetooth device not being
able to enter power save mode. That's it for system event logs.
At this point I'm totally stuck trying to figure this one out, or even trying to figure out how to obtain information on where it gets stuck. This is worse than having a BSOD as with BSOD at least there is some info on what's happening. Here
I don't even see where it gets stuck or what's preventing from booting successfully.
Please help!!!

Here is the link to the SrtTrail.txt file:
http://1drv.ms/1sh7rCy
Again, let me clarify the situation as well as provide some additional information that I discovered since original post. Per original post - I can boot into the system up and until installer gets activated either by trying to uninstall or upgrade
existing software or install new one. At the time, the only way I could get the system to boot again was to let it fail boot twice and on the third attempt let it perform system restore from a restore point, and then it would boot again (with all the
installed/updated/uninstall changes wiped out)
Since then I discovered the following additional behavior points:
I managed to get it to accept couple of software upgrades by using roughly the following steps: let it fail boot twice. On the third attempt instead of choosing system restore I instead cancel or choose advanced options (depending on what it offers).
Typically it goes either through some system analysis or disk check for errors - wait and it doesn't find anything. When presented with a menu of other recovery options (like changing UEFI, command prompt, etc), I simply choose to exit and continue loading
windows. At this point it sometimes (I'd say 1 out of 3 times) manages to boot successfully, retaining all the changes (i.e. retaining software updates and the like). If it doesn't succeed booting, repeat until it does. Using these steps
I managed to update most of software so far, including windows update. But each time it's a struggle to get it to boot again.
Simply rebooting the system without any changes succeeds most of the time. However, today I noticed that a plain reboot (without any installer/uninstaller/update or any other system/soft/config changes) doesn't always succeed, requiring the same process
as in previous bullet point to get it to boot again.
I also noticed an additional behavior - my keyboard an mouse have some buttons that are illuminated (on dell keyboard those are media buttons, and on the dell mouse it is mouse sensitivity indicator). I noticed that when windows boot up, the keyboard and
mouse lights go out simultaneously. If they come back about a second or two later (with one flicker in between), then system boots up fine (the moment they come back, the system displays the logon screen with the seatle space needle). However,
if they don't come back, then the boot will hang there for ever. Is it possible that some driver sometimes succeeds to be loaded correctly, and sometimes fails to load causing Windows to perpetually wait for that driver to finish loading (which it never
does)? If that sounds like a possibility, how can I find out what is it that windows is doing when it starts to perpetually wait for whatever it is waiting for? Tell me what logs would help to understand that and how to capture those!
Also note that I run Avira Antivir antivirus (ever since I got this PC), and it doesn't flag anything suspicious on the system. I also ran MalwareBytes scan which found no suspects, as well as GMER rootkit scanner (which as far as i can tell, also
did not find anything suspicious).
There is another oddity that is going on with the system - may or may not be related, so mentioning just in case it is - which is that I'm using Dropbox, and it keeps creating "My Videos" folder on the Desktop, even though it is way outside of my dropbox
root. Deleting the folder doesn't help as the moment I right-click on the Desktop, it re-appears. It, oddly enough, also appears in C:\Users\{profile} folder right along side real "My Videos" folder. Looking properties of both in explore
shows in the property pages that one is located in C:\Users\{profile} and another in C:\Users\{profile}\Desktop (and again, yet both of those explore shows in C:\Users\{profile}). Like I said, not sure if these are related (I suspect not, but who knows),
so mentioning just in case.
Note that I'm trying to fix it without going through refresh or reset since the first one would cause the pain to reinstall of all the software on the system (without any indication that this would solve the issue), and the later option would just completely
wipe out everything off of the system, which is even more painful, and again would not guarantee solution (e.g. if it is a bad driver that would get reinstalled anyway after wipe. Yes, I technically do have backups, but those are more for drastic case if my
harddrive crashes, and wouldn't want to rely on those to voluntarily wipe the system due to odd behaviors - too painful and time-consuming. I'm looking for a solution to problem rather than just-start-from-the-beginning-because-it-is-easier approach.
Thanks, let me know how to get the troubleshooting info to get to root cause.

Hangs on boot after lion upgrade

I've upgraded to Lion and since upgrading my macbook pro hangs when booting about 4 out of 10 times. I get to the desktop and then get a never-ending spinning color wheel.
2.8 Gb core 2 duo
8 GB ram
Summer 2009 model

When you boot in single user or safe mode, all third party software is prevented from started. So it is possbile one of your third party party applications that are starting at boot is not compatable with the new RAM. I would try turning it all off and then test them all each in turn.
Allan

Can't boot after upgrading 3.0.3

Hi,
After processing a yum upgrade of my Oracle VM Server 3.02 -> 3.0.3.My OVM Server hangs and reboot at this step
[    0.893453] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[    0.900517] pci 0000:0b:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[    0.900936] pci 0000:0d:00.0: PME# supported from D0 D3hot D3cold
[    0(XEN) Resetting with ACPI MEMORY or I/O RESET_REG.
I try to boot with pcie_aspm=off kernel parameters but it doesn't work.
Somaeone have any idea ?

A couple things to try. Ask the person if they use Verizon. If so, ask them to do *228 to update their phone. If that's not the case, try deleting the contact and add it back to contacts.

Random Kernel Panic after upgrade to kernel 2.6.36

Hello,
First of all, I apologise if this topic has already come up on the forums, but i've checked and can't see anything specifically relating to the problem im having, and ive also checked the bugs section of Archwiki and can't seem to see anything on there either. I'm not sure what information you guys need so ill just post as much as I can think of in this thread and then if you need any other info, ill post it on request.
The problem im having relates to a recent system update, which I did sometime within the past 4 weeks or so, after not upgrading for quite a while due to lack of free time.
In the last update I remember seeing it upgrading the kernel from 2.6.35 to 2.6.36, and since then I have been getting completly random kernel panics, whereby everything freezes. If I have audio output, the sound crashes and everything freezes, and the caps lock and scroll lock lights just flash in sync on the keyboard.
I have never had any problems like this in all the 7 months that i've been using Arch as a permenant OS.
Hardware:
Mobo: ASRock 775Dual-VSTA
Ram: 2GB (2x 1GB different brand sticks, same specs)
CPU: Intel Core 2 Duo 1.6GHz
GFX: Nvidia 8800GT 512MB
Plug and Play hardware that is normally always connected:
1. Zoom Wireless Dongle (4410b chipset, using ndiswrapper and the Zoom windows driver)
2. Digital TV Stick (Artec T1) with specific firmware and using MeTV as a viewer.
I've looked in all of the logs, including: dmesg, everything.log, daemon.log, errors.log, messages.log and all the other logs. But there is very little information relating to the crash in there. I'm guessing this is because its a kernel panic so it doesn't have chance to dump anything into the logs before it all crashes? If needs be I can post whichever logs you think will be most useful, but i'm using my laptop at the minute so I wont get chance to post them until tomorrow evening.
I've also tried enabling the testing repos and upgraded to kernel 2.6.37-1 to see if this suspected bug is fixed, but the panic seems to happen the same, if not more with kernel 2.6.37-1. At the minute I've rolled my system back to kernel 2.6.36 because it seemed a little more stable.
It doesn't just crash when your in the X server either. Theres been a few times when i've had a kernel panic during boot. Sometimes a couple of seconds after it starts to boot into Arch. And sometimes just as its processing the Udev events. But as I say it seems completely random rather than relating to specific events.
During one of the crashes at boot I got an error message on the screen which read:
Setting Latency Timer to 64
HDA Intel 0000:80:01.0: PCI: disallowing DAC for device
[<c131621b>] ? error_code+0x67/0x6c
Thats as much as I can think of at the minute. As I say, if you need any more information or need me to paste my log files then let me know and i will do that tomorrow.
Thanks in advance for the help, its much appreciated.
Scott.
Last edited by ScottWilson1990 (2011-01-10 01:18:26)

Hi Daniel,
I'm just guessing that its a kenel panic, as when it happens both the caps lock and scroll lock lights flash in sync, which is a sign of kernel panic isn't it?
My cpu is i686.
I've just read that post and i've downgraded udev to 164-3 to see if this solves the problem as some people have said in that post, although others later on in the thread say that this doesn't solve it for them. This morning it took me 4 restarts just to get arch to boot without the panic. I took a picture of the screen during the panic which ill post after work this evening, it looks pretty similar to the picture posted by "rabid_works" in the thread you pasted. I'm not sure about your post in the other threat that relates to the errors in the Oops report, could you clarify this so I can see if the problems reported in that thread are what I am experiencing?.
In the meantime, here is my pacman.log from 26.12.10 when I did the upgrade and the problems started. (note I have done upgrades following 26.12.10 to see if anything fixed the problem but with no luck, that is why the log is so long and I don't have any hosting anymore, so i've had to post it in quotes, I apologise).
[2010-12-26 15:13] Running 'pacman -Sy'
[2010-12-26 15:13] synchronizing package lists
[2010-12-26 15:14] Running 'pacman -Syu'
[2010-12-26 15:14] synchronizing package lists
[2010-12-26 15:14] starting full system upgrade
[2010-12-26 15:35] Running 'pacman -Syu'
[2010-12-26 15:35] synchronizing package lists
[2010-12-26 15:35] starting full system upgrade
[2010-12-26 16:45] removed libusb1 (1.0.8-1)
[2010-12-26 16:45] removed pycairo (1.8.10-2)
[2010-12-26 16:45] removed python-numpy (1.5.0-2)
[2010-12-26 16:45] upgraded gnome-menus (2.30.4-2 -> 2.30.5-1)
[2010-12-26 16:45] upgraded gnome-desktop (2.32.0-2 -> 2.32.1-1)
[2010-12-26 16:45] upgraded tzdata (2010n-1 -> 2010o-1)
[2010-12-26 16:45] Generating locales...
[2010-12-26 16:45] en_GB.UTF-8... done
[2010-12-26 16:45] en_US.UTF-8... done
[2010-12-26 16:46] en_US.ISO-8859-1... done
[2010-12-26 16:46] Generation complete.
[2010-12-26 16:46] upgraded glibc (2.12.1-3 -> 2.12.1-4)
[2010-12-26 16:46] upgraded gcc-libs (4.5.1-1 -> 4.5.1-2)
[2010-12-26 16:46] upgraded pcre (8.10-1 -> 8.11-1)
[2010-12-26 16:46] upgraded glib2 (2.26.0-2 -> 2.26.1-1)
[2010-12-26 16:46] upgraded zlib (1.2.5-2 -> 1.2.5-3)
[2010-12-26 16:46] upgraded ncurses (5.7-3 -> 5.7-4)
[2010-12-26 16:46] upgraded readline (6.1.002-1 -> 6.1.002-2)
[2010-12-26 16:46] upgraded libxml2 (2.7.7-2 -> 2.7.8-1)
[2010-12-26 16:46] upgraded bash (4.1.009-1 -> 4.1.009-3)
[2010-12-26 16:46] upgraded findutils (4.4.2-2 -> 4.4.2-3)
[2010-12-26 16:46] upgraded gzip (1.4-1 -> 1.4-2)
[2010-12-26 16:46] upgraded texinfo (4.13a-4 -> 4.13a-5)
[2010-12-26 16:46] upgraded libtasn1 (2.6-1 -> 2.8-1)
[2010-12-26 16:46] upgraded gnutls (2.8.6-1 -> 2.10.4-1)
[2010-12-26 16:46] upgraded libsoup (2.32.0-1 -> 2.32.2-1)
[2010-12-26 16:46] upgraded db (5.1.19-2 -> 5.1.19-3)
[2010-12-26 16:46] upgraded openssl (1.0.0.a-3 -> 1.0.0.c-1)
[2010-12-26 16:46] upgraded sqlite3 (3.7.3-1 -> 3.7.4-1)
[2010-12-26 16:46] upgraded heimdal (1.3.3-2 -> 1.3.3-4)
[2010-12-26 16:46] upgraded evolution-data-server (2.32.0-2 -> 2.32.1-1)
[2010-12-26 16:46] upgraded inputproto (2.0-1 -> 2.0.1-1)
[2010-12-26 16:46] upgraded libxi (1.3.2-1 -> 1.4.0-1)
[2010-12-26 16:46] upgraded libpng (1.4.4-1 -> 1.4.5-1)
[2010-12-26 16:46] upgraded expat (2.0.1-5 -> 2.0.1-6)
[2010-12-26 16:46] upgraded xproto (7.0.18-1 -> 7.0.20-1)
[2010-12-26 16:46] upgraded libx11 (1.3.5-1 -> 1.4.0-1)
[2010-12-26 16:46] upgraded attr (2.4.44-1 -> 2.4.44-2)
[2010-12-26 16:46] upgraded libcap (2.19-1 -> 2.19-2)
[2010-12-26 16:46] upgraded coreutils (8.6-1 -> 8.7-1)
[2010-12-26 16:46] warning: /etc/hosts installed as /etc/hosts.pacnew
[2010-12-26 16:46] warning: /etc/gshadow installed as /etc/gshadow.pacnew
[2010-12-26 16:46] upgraded filesystem (2010.10-1 -> 2010.12-1)
[2010-12-26 16:46] upgraded dbus-core (1.4.0-1 -> 1.4.1-1)
[2010-12-26 16:46] upgraded dbus (1.4.0-1 -> 1.4.1-1)
[2010-12-26 16:46] upgraded avahi (0.6.27-7 -> 0.6.28-1)
[2010-12-26 16:46] upgraded libcups (1.4.4-3 -> 1.4.5-2)
[2010-12-26 16:46] upgraded gdk-pixbuf2 (2.22.0-2 -> 2.22.1-1)
[2010-12-26 16:46] upgraded gtk2 (2.22.0-5 -> 2.22.1-1)
[2010-12-26 16:46] upgraded librsvg (2.32.0-2 -> 2.32.1-1)
[2010-12-26 16:46] upgraded libogg (1.2.0-1 -> 1.2.2-1)
[2010-12-26 16:46] upgraded libvorbis (1.3.1-1 -> 1.3.2-1)
[2010-12-26 16:46] upgraded gstreamer0.10 (0.10.30-1 -> 0.10.31-1)
[2010-12-26 16:46] upgraded libcanberra (0.25-1 -> 0.26-3)
[2010-12-26 16:46] upgraded libwnck (2.30.5-1 -> 2.30.6-1)
[2010-12-26 16:46] upgraded gnome-panel (2.32.0.2-2 -> 2.32.1-1)
[2010-12-26 16:46] upgraded alacarte (0.13.2-2 -> 0.13.2-3)
[2010-12-26 16:46] upgraded alsa-utils (1.0.23-2 -> 1.0.23-3)
[2010-12-26 16:46] upgraded amsn (0.98.3-4 -> 0.98.4-1)
[2010-12-26 16:46] upgraded libusb (0.1.12-4 -> 1.0.8-1)
[2010-12-26 16:46] installed libusb-compat (0.1.3-1)
[2010-12-26 16:46] upgraded ardour (2.8.11-1 -> 2.8.11-2)
[2010-12-26 16:46] upgraded automake (1.11.1-1 -> 1.11.1-2)
[2010-12-26 16:46] upgraded bluez (4.77-1 -> 4.82-1)
[2010-12-26 16:46] upgraded boost-libs (1.43.0-2 -> 1.45.0-1)
[2010-12-26 16:46] upgraded orc (0.4.7-1 -> 0.4.11-1)
[2010-12-26 16:46] upgraded udev (163-1 -> 164-3)
[2010-12-26 16:46] upgraded gstreamer0.10-base (0.10.30-1 -> 0.10.31-1)
[2010-12-26 16:46] upgraded gstreamer0.10-base-plugins (0.10.30-1 -> 0.10.31-1)
[2010-12-26 16:46] upgraded file (5.04-2 -> 5.04-3)
[2010-12-26 16:46] upgraded cdrkit (1.1.10-1 -> 1.1.11-1)
[2010-12-26 16:46] upgraded libao (1.0.0-2 -> 1.0.0-5)
[2010-12-26 16:46] upgraded cdrdao (1.2.3-4 -> 1.2.3-5)
[2010-12-26 16:46] upgraded brasero (2.32.0-3 -> 2.32.1-1)
[2010-12-26 16:46] upgraded run-parts (3.2.3-1 -> 3.4.1-1)
[2010-12-26 16:46] upgraded sed (4.2.1-2 -> 4.2.1-3)
[2010-12-26 16:46] Clearing symlinks in /etc/ssl/certs...done.
[2010-12-26 16:46] Updating certificates in /etc/ssl/certs... 141 added, 0 removed; done.
[2010-12-26 16:46] Running hooks in /etc/ca-certificates/update.d....
[2010-12-26 16:46] updating keystore /etc/ssl/certs/java/cacerts...
[2010-12-26 16:46] added: /etc/ssl/certs/brasil.gov.br.pem
[2010-12-26 16:46] added: /etc/ssl/certs/cacert.org.pem
[2010-12-26 16:46] added: /etc/ssl/certs/ca.pem
[2010-12-26 16:46] added: /etc/ssl/certs/cert_igca_dsa.pem
[2010-12-26 16:46] added: /etc/ssl/certs/cert_igca_rsa.pem
[2010-12-26 16:46] added: /etc/ssl/certs/ABAecom_=sub.__Am._Bankers_Assn.=_Root_CA.pem
[2010-12-26 16:46] added: /etc/ssl/certs/AOL_Time_Warner_Root_Certification_Authority_1.pem
[2010-12-26 16:46] added: /etc/ssl/certs/AOL_Time_Warner_Root_Certification_Authority_2.pem
[2010-12-26 16:46] added: /etc/ssl/certs/AddTrust_External_Root.pem
[2010-12-26 16:46] added: /etc/ssl/certs/AddTrust_Low-Value_Services_Root.pem
[2010-12-26 16:46] added: /etc/ssl/certs/AddTrust_Public_Services_Root.pem
[2010-12-26 16:46] added: /etc/ssl/certs/AddTrust_Qualified_Certificates_Root.pem
[2010-12-26 16:46] added: /etc/ssl/certs/America_Online_Root_Certification_Authority_1.pem
[2010-12-26 16:46] added: /etc/ssl/certs/America_Online_Root_Certification_Authority_2.pem
[2010-12-26 16:46] added: /etc/ssl/certs/Baltimore_CyberTrust_Root.pem
[2010-12-26 16:46] added: /etc/ssl/certs/COMODO_Certification_Authority.pem
[2010-12-26 16:46] ignored import, signature not available: /etc/ssl/certs/COMODO_ECC_Certification_Authority.pem
[2010-12-26 16:46] keytool error: java.security.NoSuchAlgorithmException: SHA384withECDSA Signature not available
[2010-12-26 16:46] added: /etc/ssl/certs/Camerfirma_Chambers_of_Commerce_Root.pem
[2010-12-26 16:46] added: /etc/ssl/certs/Camerfirma_Global_Chambersign_Root.pem
[2010-12-26 16:46] added: /etc/ssl/certs/Certplus_Class_2_Primary_CA.pem
[2010-12-26 16:46] added: /etc/ssl/certs/Certum_Root_CA.pem
[2010-12-26 16:46] added: /etc/ssl/certs/Comodo_AAA_Services_root.pem
[2010-12-26 16:47] added: /etc/ssl/certs/Comodo_Secure_Services_root.pem
[2010-12-26 16:47] added: /etc/ssl/certs/Comodo_Trusted_Services_root.pem
[2010-12-26 16:47] added: /etc/ssl/certs/DST_ACES_CA_X6.pem
[2010-12-26 16:47] added: /etc/ssl/certs/DST_Root_CA_X3.pem
[2010-12-26 16:47] added: /etc/ssl/certs/DigiCert_Assured_ID_Root_CA.pem
[2010-12-26 16:47] added: /etc/ssl/certs/DigiCert_Global_Root_CA.pem
[2010-12-26 16:47] added: /etc/ssl/certs/DigiCert_High_Assurance_EV_Root_CA.pem
[2010-12-26 16:47] added: /etc/ssl/certs/DigiNotar_Root_CA.pem
[2010-12-26 16:47] added: /etc/ssl/certs/Digital_Signature_Trust_Co._Global_CA_1.pem
[2010-12-26 16:47] added: /etc/ssl/certs/Digital_Signature_Trust_Co._Global_CA_2.pem
[2010-12-26 16:47] added: /etc/ssl/certs/Digital_Signature_Trust_Co._Global_CA_3.pem
[2010-12-26 16:47] added: /etc/ssl/certs/Digital_Signature_Trust_Co._Global_CA_4.pem
[2010-12-26 16:47] added: /etc/ssl/certs/Entrust.net_Global_Secure_Personal_CA.pem
[2010-12-26 16:47] added: /etc/ssl/certs/Entrust.net_Global_Secure_Server_CA.pem
[2010-12-26 16:47] added: /etc/ssl/certs/Entrust.net_Premium_2048_Secure_Server_CA.pem
[2010-12-26 16:47] added: /etc/ssl/certs/Entrust.net_Secure_Personal_CA.pem
[2010-12-26 16:47] added: /etc/ssl/certs/Entrust.net_Secure_Server_CA.pem
[2010-12-26 16:47] added: /etc/ssl/certs/Entrust_Root_Certification_Authority.pem
[2010-12-26 16:47] added: /etc/ssl/certs/Equifax_Secure_CA.pem
[2010-12-26 16:47] added: /etc/ssl/certs/Equifax_Secure_Global_eBusiness_CA.pem
[2010-12-26 16:47] added: /etc/ssl/certs/Equifax_Secure_eBusiness_CA_1.pem
[2010-12-26 16:47] added: /etc/ssl/certs/Equifax_Secure_eBusiness_CA_2.pem
[2010-12-26 16:47] added: /etc/ssl/certs/Firmaprofesional_Root_CA.pem
[2010-12-26 16:47] added: /etc/ssl/certs/GTE_CyberTrust_Global_Root.pem
[2010-12-26 16:47] added: /etc/ssl/certs/GTE_CyberTrust_Root_CA.pem
[2010-12-26 16:47] added: /etc/ssl/certs/GeoTrust_Global_CA.pem
[2010-12-26 16:47] added: /etc/ssl/certs/GeoTrust_Global_CA_2.pem
[2010-12-26 16:47] added: /etc/ssl/certs/GeoTrust_Primary_Certification_Authority.pem
[2010-12-26 16:47] added: /etc/ssl/certs/GeoTrust_Universal_CA.pem
[2010-12-26 16:47] added: /etc/ssl/certs/GeoTrust_Universal_CA_2.pem
[2010-12-26 16:47] added: /etc/ssl/certs/GlobalSign_Root_CA.pem
[2010-12-26 16:47] added: /etc/ssl/certs/GlobalSign_Root_CA_-_R2.pem
[2010-12-26 16:47] added: /etc/ssl/certs/Go_Daddy_Class_2_CA.pem
[2010-12-26 16:47] added: /etc/ssl/certs/IPS_CLASE1_root.pem
[2010-12-26 16:47] added: /etc/ssl/certs/IPS_CLASE3_root.pem
[2010-12-26 16:47] added: /etc/ssl/certs/IPS_CLASEA1_root.pem
[2010-12-26 16:47] added: /etc/ssl/certs/IPS_CLASEA3_root.pem
[2010-12-26 16:47] added: /etc/ssl/certs/IPS_Chained_CAs_root.pem
[2010-12-26 16:47] added: /etc/ssl/certs/IPS_Servidores_root.pem
[2010-12-26 16:47] added: /etc/ssl/certs/IPS_Timestamping_root.pem
[2010-12-26 16:47] added: /etc/ssl/certs/NetLock_Business_=Class_B=_Root.pem
[2010-12-26 16:47] added: /etc/ssl/certs/NetLock_Express_=Class_C=_Root.pem
[2010-12-26 16:47] added: /etc/ssl/certs/NetLock_Notary_=Class_A=_Root.pem
[2010-12-26 16:47] added: /etc/ssl/certs/NetLock_Qualified_=Class_QA=_Root.pem
[2010-12-26 16:47] added: /etc/ssl/certs/Network_Solutions_Certificate_Authority.pem
[2010-12-26 16:47] added: /etc/ssl/certs/QuoVadis_Root_CA.pem
[2010-12-26 16:47] added: /etc/ssl/certs/QuoVadis_Root_CA_2.pem
[2010-12-26 16:47] added: /etc/ssl/certs/QuoVadis_Root_CA_3.pem
[2010-12-26 16:47] added: /etc/ssl/certs/RSA_Root_Certificate_1.pem
[2010-12-26 16:47] added: /etc/ssl/certs/RSA_Security_1024_v3.pem
[2010-12-26 16:47] added: /etc/ssl/certs/RSA_Security_2048_v3.pem
[2010-12-26 16:47] added: /etc/ssl/certs/SecureTrust_CA.pem
[2010-12-26 16:47] added: /etc/ssl/certs/Secure_Global_CA.pem
[2010-12-26 16:47] added: /etc/ssl/certs/Security_Communication_Root_CA.pem
[2010-12-26 16:47] added: /etc/ssl/certs/Sonera_Class_1_Root_CA.pem
[2010-12-26 16:47] added: /etc/ssl/certs/Sonera_Class_2_Root_CA.pem
[2010-12-26 16:47] added: /etc/ssl/certs/Staat_der_Nederlanden_Root_CA.pem
[2010-12-26 16:47] added: /etc/ssl/certs/Starfield_Class_2_CA.pem
[2010-12-26 16:47] added: /etc/ssl/certs/StartCom_Certification_Authority.pem
[2010-12-26 16:47] added: /etc/ssl/certs/StartCom_Ltd..pem
[2010-12-26 16:48] added: /etc/ssl/certs/SwissSign_Gold_CA_-_G2.pem
[2010-12-26 16:48] added: /etc/ssl/certs/SwissSign_Platinum_CA_-_G2.pem
[2010-12-26 16:48] added: /etc/ssl/certs/SwissSign_Silver_CA_-_G2.pem
[2010-12-26 16:48] added: /etc/ssl/certs/Swisscom_Root_CA_1.pem
[2010-12-26 16:48] added: /etc/ssl/certs/TC_TrustCenter__Germany__Class_2_CA.pem
[2010-12-26 16:48] added: /etc/ssl/certs/TC_TrustCenter__Germany__Class_3_CA.pem
[2010-12-26 16:48] added: /etc/ssl/certs/TDC_Internet_Root_CA.pem
[2010-12-26 16:48] added: /etc/ssl/certs/TDC_OCES_Root_CA.pem
[2010-12-26 16:48] added: /etc/ssl/certs/TURKTRUST_Certificate_Services_Provider_Root_1.pem
[2010-12-26 16:48] added: /etc/ssl/certs/TURKTRUST_Certificate_Services_Provider_Root_2.pem
[2010-12-26 16:48] added: /etc/ssl/certs/Taiwan_GRCA.pem
[2010-12-26 16:48] added: /etc/ssl/certs/Thawte_Personal_Basic_CA.pem
[2010-12-26 16:48] added: /etc/ssl/certs/Thawte_Personal_Freemail_CA.pem
[2010-12-26 16:48] added: /etc/ssl/certs/Thawte_Personal_Premium_CA.pem
[2010-12-26 16:48] added: /etc/ssl/certs/Thawte_Premium_Server_CA.pem
[2010-12-26 16:48] added: /etc/ssl/certs/Thawte_Server_CA.pem
[2010-12-26 16:48] added: /etc/ssl/certs/Thawte_Time_Stamping_CA.pem
[2010-12-26 16:48] added: /etc/ssl/certs/UTN-USER_First-Network_Applications.pem
[2010-12-26 16:48] added: /etc/ssl/certs/UTN_DATACorp_SGC_Root_CA.pem
[2010-12-26 16:48] added: /etc/ssl/certs/UTN_USERFirst_Email_Root_CA.pem
[2010-12-26 16:48] added: /etc/ssl/certs/UTN_USERFirst_Hardware_Root_CA.pem
[2010-12-26 16:48] added: /etc/ssl/certs/ValiCert_Class_1_VA.pem
[2010-12-26 16:48] added: /etc/ssl/certs/ValiCert_Class_2_VA.pem
[2010-12-26 16:48] added: /etc/ssl/certs/VeriSign_Class_3_Public_Primary_Certification_Authority_-_G5.pem
[2010-12-26 16:48] added: /etc/ssl/certs/Verisign_Class_1_Public_Primary_Certification_Authority.pem
[2010-12-26 16:48] added: /etc/ssl/certs/Verisign_Class_1_Public_Primary_Certification_Authority_-_G2.pem
[2010-12-26 16:48] added: /etc/ssl/certs/Verisign_Class_1_Public_Primary_Certification_Authority_-_G3.pem
[2010-12-26 16:48] added: /etc/ssl/certs/Verisign_Class_2_Public_Primary_Certification_Authority.pem
[2010-12-26 16:48] added: /etc/ssl/certs/Verisign_Class_2_Public_Primary_Certification_Authority_-_G2.pem
[2010-12-26 16:48] added: /etc/ssl/certs/Verisign_Class_2_Public_Primary_Certification_Authority_-_G3.pem
[2010-12-26 16:48] added: /etc/ssl/certs/Verisign_Class_3_Public_Primary_Certification_Authority.pem
[2010-12-26 16:48] added: /etc/ssl/certs/Verisign_Class_3_Public_Primary_Certification_Authority_-_G2.pem
[2010-12-26 16:48] added: /etc/ssl/certs/Verisign_Class_3_Public_Primary_Certification_Authority_-_G3.pem
[2010-12-26 16:48] added: /etc/ssl/certs/Verisign_Class_4_Public_Primary_Certification_Authority_-_G2.pem
[2010-12-26 16:48] added: /etc/ssl/certs/Verisign_Class_4_Public_Primary_Certification_Authority_-_G3.pem
[2010-12-26 16:48] added: /etc/ssl/certs/Verisign_RSA_Secure_Server_CA.pem
[2010-12-26 16:48] added: /etc/ssl/certs/Verisign_Time_Stamping_Authority_CA.pem
[2010-12-26 16:48] added: /etc/ssl/certs/Visa_International_Global_Root_2.pem
[2010-12-26 16:48] added: /etc/ssl/certs/Visa_eCommerce_Root.pem
[2010-12-26 16:48] added: /etc/ssl/certs/WellsSecure_Public_Root_Certificate_Authority.pem
[2010-12-26 16:48] added: /etc/ssl/certs/Wells_Fargo_Root_CA.pem
[2010-12-26 16:48] added: /etc/ssl/certs/XRamp_Global_CA_Root.pem
[2010-12-26 16:48] added: /etc/ssl/certs/beTRUSTed_Root_CA-Baltimore_Implementation.pem
[2010-12-26 16:48] added: /etc/ssl/certs/beTRUSTed_Root_CA.pem
[2010-12-26 16:48] added: /etc/ssl/certs/beTRUSTed_Root_CA_-_Entrust_Implementation.pem
[2010-12-26 16:48] added: /etc/ssl/certs/beTRUSTed_Root_CA_-_RSA_Implementation.pem
[2010-12-26 16:48] added: /etc/ssl/certs/thawte_Primary_Root_CA.pem
[2010-12-26 16:48] added: /etc/ssl/certs/signet_ca1_pem.pem
[2010-12-26 16:48] added: /etc/ssl/certs/signet_ca2_pem.pem
[2010-12-26 16:49] added: /etc/ssl/certs/signet_ca3_pem.pem
[2010-12-26 16:49] added: /etc/ssl/certs/signet_ocspklasa2_pem.pem
[2010-12-26 16:49] added: /etc/ssl/certs/signet_ocspklasa3_pem.pem
[2010-12-26 16:49] added: /etc/ssl/certs/signet_pca2_pem.pem
[2010-12-26 16:49] added: /etc/ssl/certs/signet_pca3_pem.pem
[2010-12-26 16:49] added: /etc/ssl/certs/signet_rootca_pem.pem
[2010-12-26 16:49] added: /etc/ssl/certs/signet_tsa1_pem.pem
[2010-12-26 16:49] added: /etc/ssl/certs/spi-ca-2003.pem
[2010-12-26 16:49] added: /etc/ssl/certs/spi-cacert-2008.pem
[2010-12-26 16:49] added: /etc/ssl/certs/deutsche-telekom-root-ca-2.pem
[2010-12-26 16:49] done.
[2010-12-26 16:49] done.
[2010-12-26 16:49] upgraded ca-certificates (20090814-3 -> 20090814+nmu2-1)
[2010-12-26 16:49] upgraded ca-certificates-java (20090629-2 -> 20100412-2)
[2010-12-26 16:49] upgraded cairomm (1.8.4-1 -> 1.8.6-1)
[2010-12-26 16:49] upgraded curl (7.21.2-2 -> 7.21.3-1)
[2010-12-26 16:49] upgraded dbus-glib (0.86-1 -> 0.92-1)
[2010-12-26 16:49] upgraded python2 (2.7-3 -> 2.7.1-3)
[2010-12-26 16:49] upgraded libtorrent-rasterbar (0.15.4-2 -> 0.15.4-3)
[2010-12-26 16:49] upgraded twisted (10.1.0-1 -> 10.2.0-1)
[2010-12-26 16:49] installed python2-chardet (2.0.1-3)
[2010-12-26 16:49] >>> Deluge's daemon is running default with the "deluge" user. The default download directory is /srv/deluge/.
[2010-12-26 16:49] You can change the user by editing /etc/conf.d/deluged
[2010-12-26 16:49] upgraded deluge (1.3.1-1 -> 1.3.1-2)
[2010-12-26 16:49] upgraded device-mapper (2.02.75-1 -> 2.02.78-1)
[2010-12-26 16:49] upgraded dhcpcd (5.2.8-1 -> 5.2.9-1)
[2010-12-26 16:49] upgraded diffutils (3.0-1 -> 3.0-2)
[2010-12-26 16:49] upgraded dnsutils (9.7.1.P2-1 -> 9.7.2.P3-1)
[2010-12-26 16:49] upgraded eog (2.32.0-2 -> 2.32.1-1)
[2010-12-26 16:49] upgraded ethtool (6-2 -> 2.6.35-2)
[2010-12-26 16:49] upgraded fakeroot (1.14.4-2 -> 1.14.5-1)
[2010-12-26 16:49] upgraded feh (1.10-1 -> 1.10.1-1)
[2010-12-26 16:49] upgraded sdl (1.2.14-5 -> 1.2.14-6)
[2010-12-26 16:49] upgraded schroedinger (1.0.9-1 -> 1.0.10-1)
[2010-12-26 16:49] upgraded libvpx (0.9.5-1 -> 0.9.5-2)
[2010-12-26 16:49] upgraded libdrm (2.4.21-2 -> 2.4.22-3)
[2010-12-26 16:49] upgraded pixman (0.18.4-1 -> 0.20.0-1)
[2010-12-26 16:49] upgraded xorg-server-common (1.9.2-1 -> 1.9.2-2)
[2010-12-26 16:49] upgraded xorg-server (1.9.2-1 -> 1.9.2-2)
[2010-12-26 16:49] upgraded nvidia-utils (260.19.12-1 -> 260.19.29-1)
[2010-12-26 16:49] upgraded libva (1.0.5-2 -> 1.0.6-1)
[2010-12-26 16:49] upgraded ffmpeg (25472-1 -> 25679-1)
[2010-12-26 16:49] upgraded file-roller (2.32.0-1 -> 2.32.1-1)
[2010-12-26 16:49] upgraded xulrunner (1.9.2.12-1 -> 1.9.2.13-2)
[2010-12-26 16:49] upgraded firefox (3.6.12-1 -> 3.6.13-1)
[2010-12-26 16:49] upgraded flashplugin (10.1.85.3-1 -> 10.1.102.65-1)
[2010-12-26 16:49] installed libasyncns (0.8-3)
[2010-12-26 16:49] installed libpulse (0.9.22-2)
[2010-12-26 16:49] upgraded fluidsynth (1.1.3-1 -> 1.1.3-2)
[2010-12-26 16:49] upgraded freetype2 (2.4.3-1 -> 2.4.4-1)
[2010-12-26 16:49] upgraded gawk (3.1.8-1 -> 3.1.8-2)
[2010-12-26 16:49] upgraded gcalctool (5.32.0-2 -> 5.32.2-1)
[2010-12-26 16:49] upgraded gcc (4.5.1-1 -> 4.5.1-2)
[2010-12-26 16:49] upgraded gen-init-cpio (2.6.32-1 -> 2.6.36-1)
[2010-12-26 16:49] upgraded ghostscript (9.00-1 -> 9.00-2)
[2010-12-26 16:49] upgraded gmime (2.4.19-1 -> 2.4.21-1)
[2010-12-26 16:49] upgraded gucharmap (2.32.0-1 -> 2.32.1-1)
[2010-12-26 16:49] upgraded libnotify (0.4.5-1.1 -> 0.5.2-1)
[2010-12-26 16:50] upgraded gnome-applets (2.32.0-3 -> 2.32.1.1-1)
[2010-12-26 16:50] installed libgnome-data (2.32.0-3)
[2010-12-26 16:50] upgraded gnome-settings-daemon (2.32.0-1 -> 2.32.1-2)
[2010-12-26 16:50] upgraded gnome-control-center (2.32.0-1 -> 2.32.1-1)
[2010-12-26 16:50] installed python2-gconf (2.28.1-5)
[2010-12-26 16:50] upgraded gnome-games (2.32.0-3 -> 2.32.1-1)
[2010-12-26 16:50] upgraded gstreamer0.10-good (0.10.24-1 -> 0.10.26-1)
[2010-12-26 16:50] upgraded libsoup-gnome (2.32.0-1 -> 2.32.2-1)
[2010-12-26 16:50] upgraded gstreamer0.10-good-plugins (0.10.24-1 -> 0.10.26-1)
[2010-12-26 16:50] upgraded gnome-media (2.32.0-1 -> 2.32.0-2)
[2010-12-26 16:50] upgraded gnome-panel-bonobo (2.32.0.2-2 -> 2.32.1-1)
[2010-12-26 16:50] installed python2-bonobo (2.28.1-5)
[2010-12-26 16:50] installed python2-libgnome (2.28.1-5)
[2010-12-26 16:50] installed python2-gnomecanvas (2.28.1-5)
[2010-12-26 16:50] installed python2-gnomevfs (2.28.1-5)
[2010-12-26 16:50] upgraded gnome-python (2.28.1-3 -> 2.28.1-5)
[2010-12-26 16:50] upgraded polkit (0.98-1 -> 0.99-1)
[2010-12-26 16:50] upgraded procps (3.2.8-1 -> 3.2.8-3)
[2010-12-26 16:50] upgraded pm-utils (1.4.0-1 -> 1.4.1-1)
[2010-12-26 16:50] upgraded upower (0.9.6-0.20100929 -> 0.9.7-2)
[2010-12-26 16:50] upgraded polkit-gnome (0.97-1 -> 0.99-1)
[2010-12-26 16:50] upgraded gnome-session (2.32.0-1 -> 2.32.1-1)
[2010-12-26 16:50] upgraded vte (0.26.1-1 -> 0.26.2-1)
[2010-12-26 16:50] upgraded gnome-terminal (2.32.0-1 -> 2.32.1-1)
[2010-12-26 16:50] upgraded gnome-themes (2.32.0-1 -> 2.32.1-1)
[2010-12-26 16:50] upgraded gnupg (1.4.11-1 -> 1.4.11-2)
[2010-12-26 16:50] upgraded gnupg2 (2.0.16-2 -> 2.0.16-3)
[2010-12-26 16:50] installed atkmm (2.22.1-1)
[2010-12-26 16:50] upgraded gtkmm (2.20.3-1 -> 2.22.0-1)
[2010-12-26 16:50] upgraded gparted (0.7.0-1 -> 0.7.1-1)
[2010-12-26 16:50] upgraded gpm (1.20.6-5 -> 1.20.6-6)
[2010-12-26 16:50] upgraded gstreamer0.10-bad (0.10.19-1 -> 0.10.20-1)
[2010-12-26 16:50] upgraded libdc1394 (2.1.2-1 -> 2.1.2-2)
[2010-12-26 16:50] installed gsm (1.0.13-6)
[2010-12-26 16:50] installed rtmpdump (2.3-3)
[2010-12-26 16:50] installed libgme (0.5.5-3)
[2010-12-26 16:50] upgraded gstreamer0.10-bad-plugins (0.10.19-1 -> 0.10.20-1)
[2010-12-26 16:50] upgraded gstreamer0.10-ffmpeg (0.10.10-1 -> 0.10.11-1)
[2010-12-26 16:50] upgraded gstreamer0.10-ugly (0.10.15-5 -> 0.10.16-1)
[2010-12-26 16:50] upgraded gstreamer0.10-ugly-plugins (0.10.15-5 -> 0.10.16-1)
[2010-12-26 16:50] upgraded gtk-engine-murrine (0.98.1.1-1 -> 0.98.1.1-2)
[2010-12-26 16:50] upgraded gtk-vnc (0.3.10-2 -> 0.4.2-2)
[2010-12-26 16:50] upgraded gvfs (1.6.5-2 -> 1.6.6-1)
[2010-12-26 16:50] upgraded usbutils (0.90-1 -> 0.91-4)
[2010-12-26 16:50] upgraded hal (0.5.14-4 -> 0.5.14-5)
[2010-12-26 16:50] upgraded hyphen (2.6-1 -> 2.7.1-1)
[2010-12-26 16:50] upgraded icu (4.4.2-1 -> 4.6-1)
[2010-12-26 16:50] upgraded inetutils (1.8-1 -> 1.8-2)
[2010-12-26 16:50] upgraded initscripts (2010.07-1 -> 2010.07-2)
[2010-12-26 16:50] upgraded iptables (1.4.9-1 -> 1.4.10-1)
[2010-12-26 16:50] upgraded ipw2100-fw (1.3-4 -> 1.3-5)
[2010-12-26 16:50] upgraded ipw2200-fw (3.1-2 -> 3.1-3)
[2010-12-26 16:50] upgraded isdn4k-utils (3.2p1-5 -> 3.2p1-6)
[2010-12-26 16:50] upgraded jfsutils (1.1.14-1 -> 1.1.14-2)
[2010-12-26 16:50] upgraded linux-firmware (20100911-1 -> 20101108-1)
[2010-12-26 16:50] >>> Updating module dependencies. Please wait ...
[2010-12-26 16:50] >>> MKINITCPIO SETUP
[2010-12-26 16:50] >>> ----------------
[2010-12-26 16:50] >>> If you use LVM2, Encrypted root or software RAID,
[2010-12-26 16:50] >>> Ensure you enable support in /etc/mkinitcpio.conf .
[2010-12-26 16:50] >>> More information about mkinitcpio setup can be found here:
[2010-12-26 16:50] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
[2010-12-26 16:50]
[2010-12-26 16:50] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2010-12-26 16:50] ==> Building image "default"
[2010-12-26 16:50] ==> Running command: /sbin/mkinitcpio -k 2.6.36-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
[2010-12-26 16:50] :: Begin build
[2010-12-26 16:50] :: Parsing hook [base]
[2010-12-26 16:50] :: Parsing hook [udev]
[2010-12-26 16:50] :: Parsing hook [autodetect]
[2010-12-26 16:50] :: Parsing hook [pata]
[2010-12-26 16:50] :: Parsing hook [scsi]
[2010-12-26 16:51] :: Parsing hook [sata]
[2010-12-26 16:51] :: Parsing hook [filesystems]
[2010-12-26 16:51] :: Generating module dependencies
[2010-12-26 16:51] :: Generating image '/boot/kernel26.img'...SUCCESS
[2010-12-26 16:51] ==> SUCCESS
[2010-12-26 16:51] ==> Building image "fallback"
[2010-12-26 16:51] ==> Running command: /sbin/mkinitcpio -k 2.6.36-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
[2010-12-26 16:51] :: Begin build
[2010-12-26 16:51] :: Parsing hook [base]
[2010-12-26 16:51] :: Parsing hook [udev]
[2010-12-26 16:51] :: Parsing hook [pata]
[2010-12-26 16:51] :: Parsing hook [scsi]
[2010-12-26 16:51] :: Parsing hook [sata]
[2010-12-26 16:51] :: Parsing hook [filesystems]
[2010-12-26 16:51] :: Generating module dependencies
[2010-12-26 16:51] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
[2010-12-26 16:51] ==> SUCCESS
[2010-12-26 16:51] upgraded kernel26 (2.6.35.8-1 -> 2.6.36.2-1)
[2010-12-26 16:51] upgraded less (436-1 -> 436-2)
[2010-12-26 16:51] upgraded libdvdcss (1.2.10-1.1 -> 1.2.10-2)
[2010-12-26 16:51] upgraded libgnome (2.32.0-1 -> 2.32.0-3)
[2010-12-26 16:51] upgraded libgssglue (0.1-2 -> 0.1-3)
[2010-12-26 16:51] upgraded libmpdclient (2.2-1 -> 2.3-1)
[2010-12-26 16:51] upgraded libmtp (1.0.2-1 -> 1.0.2-2)
[2010-12-26 16:51] upgraded libpcap (1.1.1-1 -> 1.1.1-2)
[2010-12-26 16:51] upgraded libpurple (2.7.5-1 -> 2.7.8-1)
[2010-12-26 16:51] upgraded libwebkit (1.2.5-1 -> 1.2.5-2)
[2010-12-26 16:51] upgraded libwpd (0.8.14-1 -> 0.9.0-1)
[2010-12-26 16:51] upgraded lvm2 (2.02.75-1 -> 2.02.78-1)
[2010-12-26 16:51] upgraded lzo2 (2.03-1 -> 2.04-1)
[2010-12-26 16:51] upgraded man-db (2.5.7-1 -> 2.5.9-1)
[2010-12-26 16:51] upgraded man-pages (3.29-1 -> 3.32-1)
[2010-12-26 16:51] upgraded me-tv (1.3.4-1 -> 1.3.5-1)
[2010-12-26 16:51] upgraded mesa (7.8.2-3 -> 7.9.0.git20101207-2)
[2010-12-26 16:51] upgraded mousetweaks (2.32.0-1 -> 2.32.1-1)
[2010-12-26 16:51] upgraded mpd (0.15.13-1 -> 0.16-2)
[2010-12-26 16:51] upgraded mpfr (3.0.0.p4-1 -> 3.0.0.p8-1)
[2010-12-26 16:52] upgraded nano (2.2.5-1 -> 2.2.6-1)
[2010-12-26 16:52] upgraded nautilus (2.32.0-1 -> 2.32.2-1)
[2010-12-26 16:52] module configuration already contains alias directive
[2010-12-26 16:52]
[2010-12-26 16:52] upgraded ndiswrapper (1.56-5 -> 1.56-6)
[2010-12-26 16:52] upgraded wireless_tools (29-3 -> 29-4)
[2010-12-26 16:52] warning: directory permissions differ on var/lib/NetworkManager/
filesystem: 755 package: 700
[2010-12-26 16:52] ATTENTION:
[2010-12-26 16:52] /etc/NetworkManager/nm-system-settings.conf has been replaced
[2010-12-26 16:52] by /etc/NetworkManager/NetworkManager.conf. Make sure you move
[2010-12-26 16:52] any custom settings to the new config file.
[2010-12-26 16:52] upgraded networkmanager (0.8.1-1 -> 0.8.3-0.20101130)
[2010-12-26 16:52] upgraded network-manager-applet (0.8.1-2 -> 0.8.2-2)
[2010-12-26 16:52] upgraded nfsidmap (0.23-3 -> 0.23-4)
[2010-12-26 16:52] In order to use the new nvidia module, exit Xserver and unload it manually.
[2010-12-26 16:52] upgraded nvidia (260.19.12-1 -> 260.19.29-1)
[2010-12-26 16:52] when you use a non-reparenting window manager
[2010-12-26 16:52] set _JAVA_AWT_WM_NONREPARENTING=1 in
[2010-12-26 16:52] /etc/profile.d/openjdk6.sh
[2010-12-26 16:52] upgraded openjdk6 (6.b20_1.9.1-1 -> 6.b20_1.9.3-1)
[2010-12-26 16:52] upgraded raptor (1.4.21-1 -> 1.4.21-2)
[2010-12-26 16:52] upgraded rasqal (0.9.20-1 -> 0.9.21-1)
[2010-12-26 16:52] upgraded redland (1.0.12-2 -> 1.0.12-3)
[2010-12-26 16:52] * check /etc/profile.d/openoffice.sh, then relogin or "source" the file
[2010-12-26 16:52] * see http://wiki.archlinux.org/index.php/Openoffice
[2010-12-26 16:52] how to use extensions, e.g. for spell checking
[2010-12-26 16:52] see /usr/lib/openoffice/share/extension/install what
[2010-12-26 16:52] is shipped with this package
[2010-12-26 16:52] * make sure you have installed a ttf font (ttf-dejavu recommended)
[2010-12-26 16:52] upgraded openoffice-base (3.2.1-3 -> 3.2.1-4)
[2010-12-26 16:52] warning: /etc/pacman.d/mirrorlist installed as /etc/pacman.d/mirrorlist.pacnew
[2010-12-26 16:52] upgraded pacman-mirrorlist (20100825-1 -> 20101223-1)
[2010-12-26 16:52] upgraded patch (2.6.1-1 -> 2.6.1-2)
[2010-12-26 16:52] upgraded perl-xml-parser (2.36-7 -> 2.40-1)
[2010-12-26 16:52] upgraded pidgin (2.7.5-1 -> 2.7.8-1)
[2010-12-26 16:52] upgraded pilot-link (0.12.5-1 -> 0.12.5-2)
[2010-12-26 16:52] upgraded pkg-config (0.25-2 -> 0.25-3)
[2010-12-26 16:52] upgraded poppler-data (0.4.3-1 -> 0.4.4-1)
[2010-12-26 16:52] upgraded poppler (0.14.4-1 -> 0.14.5-1)
[2010-12-26 16:52] upgraded poppler-glib (0.14.4-1 -> 0.14.5-1)
[2010-12-26 16:52] upgraded postgresql-libs (9.0.1-2 -> 9.0.2-2)
[2010-12-26 16:52] installed python2-cairo (1.8.10-1)
[2010-12-26 16:52] upgraded python (3.1.2-2 -> 3.1.3-1)
[2010-12-26 16:52] upgraded python-chardet (2.0.1-2 -> 2.0.1-3)
[2010-12-26 16:52] installed python2-numpy (1.5.1-1)
[2010-12-26 16:52] upgraded qt (4.7.0-4 -> 4.7.1-3)
[2010-12-26 16:52] upgraded recode (3.6-5 -> 3.6-6)
[2010-12-26 16:52] upgraded reiserfsprogs (3.6.21-2 -> 3.6.21-3)
[2010-12-26 16:52] upgraded rpcbind (0.2.0-2 -> 0.2.0-3)
[2010-12-26 16:52] upgraded smbclient (3.5.5-1 -> 3.5.6-1)
[2010-12-26 16:52] upgraded syslog-ng (3.1.2-1 -> 3.2.1-1)
[2010-12-26 16:52] upgraded tar (1.23-3 -> 1.25-1)
[2010-12-26 16:52] upgraded telepathy-glib (0.12.3-1 -> 0.12.7-1)
[2010-12-26 16:53] upgraded ttf-dejavu (2.30-2 -> 2.32-2)
[2010-12-26 16:53] upgraded udisks (1.0.1-5 -> 1.0.2-1)
[2010-12-26 16:53] upgraded unrar (3.9.10-1 -> 4.0.3-1)
[2010-12-26 16:53] upgraded vino (2.32.0-1 -> 2.32.0-2)
[2010-12-26 16:53] upgraded zvbi (0.2.33-2 -> 0.2.33-3)
[2010-12-26 16:53] upgraded vlc (1.1.4.1-2 -> 1.1.5-2)
[2010-12-26 16:53] upgraded warsow-data (0.5-4 -> 0.6-1)
[2010-12-26 16:53] upgraded warsow (0.5-4 -> 0.6-3)
[2010-12-26 16:53] upgraded which (2.20-3 -> 2.20-4)
[2010-12-26 16:53] upgraded whois (5.0.7-1 -> 5.0.10-1)
[2010-12-26 16:53] upgraded wireless-regdb (2009.11.25-1 -> 2010.11.24-1)
[2010-12-26 16:53] upgraded xbitmaps (1.1.0-1 -> 1.1.1-1)
[2010-12-26 16:53] upgraded xfsprogs (3.1.3-1 -> 3.1.4-1)
[2010-12-26 16:53] upgraded xinetd (2.3.14-5 -> 2.3.14-6)
[2010-12-26 16:53] upgraded xorg-docs (1.5-1 -> 1.6-1)
[2010-12-26 16:53] upgraded xorg-iceauth (1.0.3-1 -> 1.0.4-1)
[2010-12-26 16:53] installed xorg-xdpyinfo (1.2.0-1)
[2010-12-26 16:53] installed xorg-xdriinfo (1.0.4-1)
[2010-12-26 16:53] installed xorg-xev (1.1.0-1)
[2010-12-26 16:53] installed xorg-xlsatoms (1.1.0-1)
[2010-12-26 16:53] installed xorg-xlsclients (1.1.1-1)
[2010-12-26 16:53] installed xorg-xprop (1.2.0-1)
[2010-12-26 16:53] installed xorg-xvinfo (1.1.1-1)
[2010-12-26 16:53] installed xorg-xwininfo (1.1.1-1)
[2010-12-26 16:53] upgraded xorg-utils (7.6-5 -> 7.6-6)
[2010-12-26 16:53] upgraded xorg-xauth (1.0.4-1 -> 1.0.5-1)
[2010-12-26 16:53] upgraded xorg-xbacklight (1.1.1-1 -> 1.1.2-1)
[2010-12-26 16:53] upgraded xorg-xgamma (1.0.3-1 -> 1.0.4-1)
[2010-12-26 16:53] upgraded xorg-xhost (1.0.3-1 -> 1.0.4-1)
[2010-12-26 16:53] upgraded xorg-xinit (1.2.1-1 -> 1.3.0-2)
[2010-12-26 16:53] upgraded xorg-xinput (1.5.2-1 -> 1.5.3-1)
[2010-12-26 16:53] upgraded xorg-xkill (1.0.2-1 -> 1.0.3-1)
[2010-12-26 16:53] upgraded xorg-xrandr (1.3.3-1 -> 1.3.4-1)
[2010-12-26 16:53] upgraded xorg-xrdb (1.0.6-1 -> 1.0.7-1)
[2010-12-26 16:53] upgraded xorg-xrefresh (1.0.3-1 -> 1.0.4-1)
[2010-12-26 16:53] upgraded xorg-xset (1.2.0-1 -> 1.2.1-1)
[2010-12-26 16:53] upgraded xorg-xsetroot (1.0.3-1 -> 1.1.0-1)
[2010-12-26 16:53] upgraded xorg-xwd (1.0.3-1 -> 1.0.4-1)
[2010-12-26 16:53] upgraded xorg-xwud (1.0.2-1 -> 1.0.3-1)
[2010-12-26 16:53] upgraded xterm (266-1 -> 267-1)
[2010-12-26 16:53] upgraded zenity (2.32.0-1 -> 2.32.1-1)
[2010-12-28 17:36] Running 'pacman -Stu'
[2010-12-28 17:36] starting full system upgrade
[2010-12-28 17:36] Running 'pacman -Syu'
[2010-12-28 17:36] synchronizing package lists
[2010-12-28 17:36] starting full system upgrade
[2010-12-28 17:37] upgraded libpurple (2.7.8-1 -> 2.7.9-1)
[2010-12-28 17:37] upgraded pidgin (2.7.8-1 -> 2.7.9-1)
[2010-12-29 23:49] Running 'pacman -S openntp'
[2010-12-29 23:49] Running 'pacman -S openntpd'
[2010-12-29 23:49] adding new group: ntp
[2010-12-29 23:49] adding new user: ntp
[2010-12-29 23:49] installed openntpd (3.9p1-13)
[2010-12-31 17:57] Running 'pacman -Syu'
[2010-12-31 17:57] synchronizing package lists
[2010-12-31 17:57] starting full system upgrade
[2010-12-31 18:03] upgraded linux-api-headers (2.6.34-1 -> 2.6.36.2-1)
[2010-12-31 18:03] Generating locales...
[2010-12-31 18:03] en_GB.UTF-8... done
[2010-12-31 18:03] en_US.UTF-8... done
[2010-12-31 18:03] en_US.ISO-8859-1... done
[2010-12-31 18:03] Generation complete.
[2010-12-31 18:03] upgraded glibc (2.12.1-4 -> 2.12.2-1)
[2010-12-31 18:03] upgraded binutils (2.20.1-4 -> 2.21-2)
[2010-12-31 18:03] upgraded gcc (4.5.1-2 -> 4.5.2-3)
[2010-12-31 18:03] upgraded gcc-libs (4.5.1-2 -> 4.5.2-3)
[2010-12-31 18:03] upgraded hyphen (2.7.1-1 -> 2.7.1-2)
[2010-12-31 18:03] upgraded libwebkit (1.2.5-2 -> 1.2.6-1)
[2010-12-31 18:03] upgraded nautilus (2.32.2-1 -> 2.32.2.1-1)
[2010-12-31 18:03] upgraded twisted (10.2.0-1 -> 10.2.0-2)
[2010-12-31 18:03] upgraded xulrunner (1.9.2.13-2 -> 1.9.2.13-3)
[2011-01-01 00:31] Running 'pacman -S dhcpcd'
[2011-01-01 00:35] Running 'pacman -Rns dhcpcd'
[2011-01-01 00:36] Running 'pacman -Rns networkmanager'
[2011-01-01 00:36] Running 'pacman -Rns network-manager-applet'
[2011-01-01 00:36] removed network-manager-applet (0.8.2-2)
[2011-01-01 00:36] removed mobile-broadband-provider-info (20100510-1)
[2011-01-01 00:36] Running 'pacman -Rns networkmanager'
[2011-01-01 00:36] removed networkmanager (0.8.3-0.20101130)
[2011-01-01 00:36] Running 'pacman -Rns netcfg'
[2011-01-01 00:36] removed netcfg (2.5.4-1)
[2011-01-07 19:27] Running 'pacman -Syu'
[2011-01-07 19:27] synchronizing package lists
[2011-01-07 19:28] upgraded pacman (3.4.1-1 -> 3.4.2-1)
[2011-01-07 19:28] Running 'pacman -Syu'
[2011-01-07 19:28] synchronizing package lists
[2011-01-07 19:28] starting full system upgrade
[2011-01-07 19:34] upgraded atkmm (2.22.1-1 -> 2.22.1-2)
[2011-01-07 19:34] upgraded bluez (4.82-1 -> 4.84-1)
[2011-01-07 19:34] upgraded cairo (1.10.0-2 -> 1.10.2-1)
[2011-01-07 19:34] upgraded cloog-ppl (0.15.9-2 -> 0.15.10-2)
[2011-01-07 19:34] upgraded pam (1.1.1-2 -> 1.1.3-1)
[2011-01-07 19:34] upgraded coreutils (8.7-1 -> 8.8-1)
[2011-01-07 19:34] upgraded pciutils (3.1.7-1 -> 3.1.7-2)
[2011-01-07 19:34] upgraded udev (164-3 -> 165-1)
[2011-01-07 19:34] upgraded device-mapper (2.02.78-1 -> 2.02.79-1)
[2011-01-07 19:34] upgraded cryptsetup (1.1.3-1 -> 1.2.0-1)
[2011-01-07 19:34] upgraded e2fsprogs (1.41.12-1 -> 1.41.14-1)
[2011-01-07 19:34] upgraded elfutils (0.149-2 -> 0.150-1)
[2011-01-07 19:34] upgraded gcc (4.5.2-3 -> 4.5.2-4)
[2011-01-07 19:34] upgraded gcc-libs (4.5.2-3 -> 4.5.2-4)
[2011-01-07 19:34] upgraded gnome-media (2.32.0-2 -> 2.32.0-3)
[2011-01-07 19:34] upgraded groff (1.20.1-4 -> 1.21-1)
[2011-01-07 19:34] upgraded hunspell (1.2.12-1 -> 1.2.14-1)
[2011-01-07 19:34] upgraded libcups (1.4.5-2 -> 1.4.6-1)
[2011-01-07 19:34] upgraded libmysqlclient (5.1.51-1 -> 5.1.54-1)
[2011-01-07 19:34] upgraded libtool (2.4-1 -> 2.4-2)
[2011-01-07 19:34] upgraded lvm2 (2.02.78-1 -> 2.02.79-1)
[2011-01-07 19:34] upgraded python2 (2.7.1-3 -> 2.7.1-4)
[2011-01-07 19:34] Updating font cache... done.
[2011-01-07 19:34] upgraded ttf-freefont (20090104-2 -> 20100919-1)
[2011-01-08 20:14] Running 'pacman -Sy'
[2011-01-08 20:14] synchronizing package lists
[2011-01-08 20:16] Running 'pacman -Sy'
[2011-01-08 20:16] synchronizing package lists
[2011-01-08 20:18] Running 'pacman -Sy'
[2011-01-08 20:18] synchronizing package lists
[2011-01-08 20:22] Running 'pacman -S kernal26'
[2011-01-08 20:22] Running 'pacman -S kernel26'
[2011-01-08 20:25] Running 'pacman -Sn kernel26'
[2011-01-08 20:26] Running 'pacman -S kernel26 ndiswrapper'
[2011-01-08 20:26] Running 'pacman -S kernel26 ndiswrapper nvidia'
[2011-01-08 20:29] >>> Updating module dependencies. Please wait ...
[2011-01-08 20:29] >>> MKINITCPIO SETUP
[2011-01-08 20:29] >>> ----------------
[2011-01-08 20:29] >>> If you use LVM2, Encrypted root or software RAID,
[2011-01-08 20:29] >>> Ensure you enable support in /etc/mkinitcpio.conf .
[2011-01-08 20:29] >>> More information about mkinitcpio setup can be found here:
[2011-01-08 20:29] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
[2011-01-08 20:29]
[2011-01-08 20:29] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2011-01-08 20:29] ==> Building image "default"
[2011-01-08 20:29] ==> Running command: /sbin/mkinitcpio -k 2.6.37-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
[2011-01-08 20:29] :: Begin build
[2011-01-08 20:29] :: Parsing hook [base]
[2011-01-08 20:29] :: Parsing hook [udev]
[2011-01-08 20:29] :: Parsing hook [autodetect]
[2011-01-08 20:29] :: Parsing hook [pata]
[2011-01-08 20:29] :: Parsing hook [scsi]
[2011-01-08 20:29] :: Parsing hook [sata]
[2011-01-08 20:29] :: Parsing hook [filesystems]
[2011-01-08 20:29] :: Generating module dependencies
[2011-01-08 20:29] :: Generating image '/boot/kernel26.img'...SUCCESS
[2011-01-08 20:29] ==> SUCCESS
[2011-01-08 20:29] ==> Building image "fallback"
[2011-01-08 20:29] ==> Running command: /sbin/mkinitcpio -k 2.6.37-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
[2011-01-08 20:29] :: Begin build
[2011-01-08 20:29] :: Parsing hook [base]
[2011-01-08 20:29] :: Parsing hook [udev]
[2011-01-08 20:29] :: Parsing hook [pata]
[2011-01-08 20:29] :: Parsing hook [scsi]
[2011-01-08 20:29] :: Parsing hook [sata]
[2011-01-08 20:29] :: Parsing hook [filesystems]
[2011-01-08 20:29] :: Generating module dependencies
[2011-01-08 20:30] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
[2011-01-08 20:30] ==> SUCCESS
[2011-01-08 20:30] upgraded kernel26 (2.6.36.2-1 -> 2.6.37-1)
[2011-01-08 20:30] module configuration already contains alias directive
[2011-01-08 20:30]
[2011-01-08 20:30] upgraded ndiswrapper (1.56-6 -> 1.56-7)
[2011-01-08 20:30] In order to use the new nvidia module, exit Xserver and unload it manually.
[2011-01-08 20:30] upgraded nvidia (260.19.29-1 -> 260.19.29-2)
[2011-01-09 22:54] Running 'pacman -S kernel26 2.6.36.2-1'
[2011-01-09 22:55] Running 'pacman -S kernel26 2.6.36.2-1'
[2011-01-09 22:55] Running 'pacman -Rns kernel26 2.6.37-1'
[2011-01-09 22:57] Running 'pacman -Rns testing/kernel26 2.6.37-1'
[2011-01-09 22:57] Running 'pacman -Rns /testing/kernel26 2.6.37-1'
[2011-01-09 22:58] Running 'pacman -Rns testing/kernel26'
[2011-01-09 22:58] Running 'pacman -Rns kernel26'
[2011-01-09 23:00] Running 'pacman -Rns kernel26 2.6.37'
[2011-01-09 23:00] Running 'pacman -Rns kernel26=2.6.37'
[2011-01-09 23:01] Running 'pacman -S kernel26'
[2011-01-09 23:01] Running 'pacman -S kernel26 nvidia ndiswrapper'
[2011-01-09 23:02] >>> Updating module dependencies. Please wait ...
[2011-01-09 23:02] >>> MKINITCPIO SETUP
[2011-01-09 23:02] >>> ----------------
[2011-01-09 23:02] >>> If you use LVM2, Encrypted root or software RAID,
[2011-01-09 23:02] >>> Ensure you enable support in /etc/mkinitcpio.conf .
[2011-01-09 23:02] >>> More information about mkinitcpio setup can be found here:
[2011-01-09 23:02] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
[2011-01-09 23:02]
[2011-01-09 23:02] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2011-01-09 23:02] ==> Building image "default"
[2011-01-09 23:02] ==> Running command: /sbin/mkinitcpio -k 2.6.36-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
[2011-01-09 23:02] :: Begin build
[2011-01-09 23:02] :: Parsing hook [base]
[2011-01-09 23:02] :: Parsing hook [udev]
[2011-01-09 23:02] :: Parsing hook [autodetect]
[2011-01-09 23:02] :: Parsing hook [pata]
[2011-01-09 23:02] :: Parsing hook [scsi]
[2011-01-09 23:02] :: Parsing hook [sata]
[2011-01-09 23:02] :: Parsing hook [filesystems]
[2011-01-09 23:02] :: Generating module dependencies
[2011-01-09 23:02] :: Generating image '/boot/kernel26.img'...SUCCESS
[2011-01-09 23:02] ==> SUCCESS
[2011-01-09 23:02] ==> Building image "fallback"
[2011-01-09 23:02] ==> Running command: /sbin/mkinitcpio -k 2.6.36-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
[2011-01-09 23:02] :: Begin build
[2011-01-09 23:02] :: Parsing hook [base]
[2011-01-09 23:02] :: Parsing hook [udev]
[2011-01-09 23:02] :: Parsing hook [pata]
[2011-01-09 23:02] :: Parsing hook [scsi]
[2011-01-09 23:02] :: Parsing hook [sata]
[2011-01-09 23:02] :: Parsing hook [filesystems]
[2011-01-09 23:02] :: Generating module dependencies
[2011-01-09 23:03] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
[2011-01-09 23:03] ==> SUCCESS
[2011-01-09 23:03] upgraded kernel26 (2.6.37-1 -> 2.6.36.2-1)
[2011-01-09 23:03] In order to use the new nvidia module, exit Xserver and unload it manually.
[2011-01-09 23:03] upgraded nvidia (260.19.29-2 -> 260.19.29-1)
[2011-01-09 23:03] module configuration already contains alias directive
[2011-01-09 23:03]
[2011-01-09 23:03] upgraded ndiswrapper (1.56-7 -> 1.56-6)
I'm also going to run some hardware tests after work just to double check that all my hardware is functioning as it should so that will eliminate another potential cause.
If downgrading Udev to 164-3 doesn't solve the problem, i will try your version of it Daniel. And if that fails ill try downgrading the kernel to 2.6.35 or something and see if that solves it.
Sorry for the super long post,
Thanks again for your help.
Scott.
Last edited by ScottWilson1990 (2011-01-10 11:51:17)

Hang on boot after upgrade to kernel 2.6.31 [SOLVED]

Similar Messages

Maybe you are looking for