Hang on import on OS X

Dual G4 1.8GHz, 1.5GB RAM, OS X 10.4.8, Nikon D80, Lightroom v1.0 (trial)
Plugged in my camera and imported my last shoot into a custom named folder, renaming the files to include a date string. About 2/3rds through Lightroom hung hung hard. It was seriously deadlocked, though all other apps were ok. I waited for 10-15 minutes and then restarted the OS. Had to hit the reset button to get the box to restart.
Upon restart my library was still sane, and I was able to import the photos again ignoring any duplicates (which it duly warned me about). So, no harm done in the long run.
I captured three samples of the app while it was stuck. The call graph is pretty simple. Everything was waiting for
..., fopen_hook, -[NSFileManager removeFileAtPath:handler:], -[NSFileManager _removeFileAtPath:handler:shouldDeleteFork:], _NSDeleteFile2, unlink, unlink
Interestingly enough, my system.log had many lines all saying:
Feb 27 19:51:57 swizzle /Applications/Adobe Lightroom.app/Contents/MacOS/Adobe Lightroom: CGContextClosePath: no current point.
Feb 27 20:07:55 swizzle /Applications/Adobe Lightroom.app/Contents/MacOS/Adobe Lightroom: CGContextClosePath: no current point.

Timothy: Like you I was just now trying to download from a card and got the spinning beach ball. Could also not get LR to Force Quit. I'm on a MAC G5 Dual 2.0 w/ 4 gigs RAM. --Frank

Similar Messages

Hang during import from camera or media - HELP!

iPhoto hangs during import from camera or media reader. Works for 20 or more photos, then hangs. No response at all. Must force quit. After restarting the import, it will go further the next time, then hang again. And again. And again. Eventually the import completes. After that, all is OK until next import. VERY FRUSTRATING. Especially with 8GB media cards. ARRGH!
I've tried rebuilding iPhoto library (all options). Using iPhoto 7.1.5 on OS X 10.5.6. 4GB ram, intel dual core.
Help me Obe-Wan. You're my only hope.

LarryHN wrote:
Once you get your photos use your camera to reformat your media card - problems like this can be caused by a flaw in the card format
And it is better to use a card reader to import yoru photos and after they are safely in iPhoto use your camera to reformat your card - this assues no data loss and keeps your card format fresh
LN
I usually use the media reader. After the imports started hanging is when I tried importing direct from the camera to see if it made a difference. No difference.
I've reformatted the media. No difference. Still hangs on first import after reformat. Multiple media cards, all same result. Tried different USB ports, same result. Tried different media readers. Same result.

IPhoto hang on Import

iPhoto 11, update 9.2.3, is hanging when importing photo's, no matter if the source is a file, iPhone or a camara.
I reinstalled iPhoto, did a mediathek db repair, a mediathek acces rights repair but nothing worked. iPhoto can only be forced terminated after it is started.
Any ideas?

First, let me say, I haven't really used a mac since about 1999 (PowerMac G3, I think?), so forgive my out-of-dateness. Also, this is the closest discussion I could find to the problem we've got, but it's not an exact match.
My other half has a MacBook Pro that is just a few months old and has issues with iPhoto that I said I'd look into. After he's been using it awhile and imported a bunch of photos into it (i.e. over the course of a couple months), it'll start hanging up when opening, or even not wanting to open the program at all. Over the course of the 2 years I've known him, I've seen it happen at least 3 or 4 times between this computer and its predecessor. I don't know the exact number of photos, but I don't think it could be near the 250k number I saw posted about being the limit. Could the data size of all the pictures contribute to the problem instead of just the quantity of pictures? Does this happen often? Is there a known reason it does?
So far it seems that his solution has been to wait for it to start working again on its own (and it seems it eventually does, for some reason. This time it took a week or so of not even trying to open the program, trying to open and hang while not loading any pictures, and then today just started working while i was trying to search out what to do to recover photos or something) and then exporting a batch of photos out of the program to make a smaller library.
If it hadn't started working again about an hour ago, I would suggest the rebuilding thing to him, but since it has started again, I don't know. Would that still be a good idea? Are there any suggestions for preventing this in the future? And if it does happen, is rebuilding the library the proper solution to try when it does?
Hope that made some sort of sense.

Encore CS3 - Hangs and import problems with menus and avi footage with audio tracks present.

I'm trying to import some footage files in .avi format into Encore CS3 and am having several problems.
In what follows when I say "crash" I mean Encore quits with a standard Windows error. When I say "hang" I mean Encore does not quit but rather becomes an unresponsive process that must be killed manually using Windows Task Manager.
My System:
WinXP Pro SP2
2.93 GHz Intel Celeron CPU - single core
Intel PERL mobo
3GB 400MHz RAM
NVidia 7800GS video
I mention these specs however I am not experiencing any hardware
related bugs or issues (like out of memory or video driver crashes
etc) when using any CS3 app.
The footage files (as reported by GSpot) and problems I am seeing. In all cases GSpot reports that I have the appropriate codec installed:
footage1.avi - Dx50 XVid 1.0.3, Dolby AC3 48kHz 192kb/s, 716834 KB
Attempting to import as timeline causes Encore CS3 to hang.
Importing as an Asset allows it to import but when I try to click
on it in the project windown to add it to a new empty timeline,
Encore hangs. It plays fine in Windows Media Player.
footage2.avi - Dx50 XVid 1.0.3, MPEG-1 Layer 3 48kHz 128kb/s, 718302 KB
Imports fine as either a timeline or asset but no audio track comes
with it, even though there is an audio track in the footage. It plays
fine in Windows Media Player. Video imports perfectly, just no audio.
footage3.avi - Dx50 XVid 1.0.3, MPEG1-Layer3 48kHz 112kb/s, 717606 KB
Imports fine as either a timeline or asset but no audio track comes
with it, even though there is an audio track in the footage. It plays
fine in Windows Media Player. Video imports perfectly, just no
audio. I tried converting this one using AVS to both MPEG3 and DivX,
each using MPEG1-Layer3 44kHz 192kb/s audio, and got the same issue
upon importing into Encore CS3. I also loaded it into Camtasia
Studio and it looked fine over there. The audio was present and I
was able to export it as a .WAV file. When I tried looking at the
file in Soundbooth CS3, there was no audio track or, more
accurately, the audio track was a flat line.
By way of comparison these are importing perfectly:
footage4.avi - XVID XviD 1.1.0 Beta2, MPEG1-Layer3 48kHz 189kb/s Two mono
channels LAME3.96r, 717436 KB.
footage5.avi - XVID XviD 1.1.0 Final, Dolby AC3 48kHz 448kb/s Six
channels (3/2 .1), 716418 KB.
footage6.avi - XVID XviD 1.1.0 Final, Dolby AC3 48kHz 448kb/s Six
channels (3/2 .1), 716418 KB.
footage7.avi - XVID XviD 1.0.3, Dolby AC3 48kHz 448kb/s 6 channels
(3/2 .1), 717502 KB
footage8.avi - XVID XviD 1.0.3, Dolby AC3 48kHz 448kb/s 6 channels
(3/2 .1), 717180 KB
footage9.avi - XVID XviD 1.1.2 Final, Dolby AC3 48kHz 448kb/s 6 channels
(3/2 .1), 2291904 KB
Although this one imported & transcoded correctly, when I went to
build it to a DVD image file I got some strange errors during the
"planning video" stage that prevented the process from completing.
Unfortunately I neglected to write down the error message I recieved
which read like quite nonsensical babble to me, and I have since
deleted the project folder. I remember it was not a memory or
display related error and it included a timestamp where the error
was happening. I played the footage in the preview panel thru the
identified timestamp but it previewed perfectly without even a
jitter in either the video or audio. Took forever to transcode so I
doubt I'll be doing this one again anytime soon.
Another issue I am having is with the motion menus. I burned a DVD and it does not load correctly in one of my DVD players (a Sony rdr-gx330 recorder/player). It appears to take extra time to recognize the disk, the startup (first-play) menu does not show automatically, and I must press the Main Menu button on the

Another issue I am having is with the motion menus. I burned a DVD and it does not load correctly in one of my DVD players (a Sony rdr-gx330 recorder/player). It appears to take extra time to recognize the disk, the startup (first-play) menu does not show automatically, and I must press the Main Menu button on the remote control to make it appear. Other than that it seems to play ok in that player. Also tested it in 2 other DVD players (a Panasonic and Zenith) and it worked just fine like it's supposed to in them. Also plays perfectly in my computer's DVD player/burner using Windows Media Player v10. I tried burning to Memorex +RW single-layer single-sided disks at 6, 7, & 8Mbps project settings but got the exact same result every time.
Encore CS3 crashes fairly often during authoring, particularly during imports, and when I go to edit things like calling up a timeline in the timeline panel, dragging footage into an existing timeline, or changing button links in a menu etc.. I have also experienced seemingly random hangs even more often, probably 5 or 6 times as often as a crash. Saving the project after every little change I make, then closing and restarting Encore allows me to make progress albeit at a significantly reduced workflow rate. Accessing Photoshop from Encore appears to be working flawlessly so far aside from the slow load times. Encore hangs sometimes during video transcoding, repeat the process and it works ok. If I try to import a menu from the library after importing my footage files, Encore hangs trying to import it either at the 50% mark or the 99% mark (it varies even with the same exact menu selected from the library). If I import the menu first and the footage after, then no problems. Also trying to render motion menus after importing footage causes Encore to hang, render before footage import and everything works ok. Interestingly enough, previewing my project in Encore's monitor or preview panels works perfectly even in High quality mode -- in fact it operates quite smoothly in comparison to other apps I have tried. Although those footage files that had missing audio tracks on import obviously played silently, I have yet to experience a hang or crash during a preview or when scrubbing through a timeline in the monitor panel.
The last problem I've seen is with the project cache files. It doesn't always get rid of cache files when stuff is deleted from the project. I was working on one project and surprisingly ran out of disk space. When I tracked it down I found that there were some two dozen copies of a footage file I had repeatedly imported and deleted from the project still sitting in the cache folder. The file was an avi about 2GB so it was taking up some 40 GB of disk space for stuff that was no longer in the project. I tried shutting down Encore and manually deleting all the cache files, and that worked for most of them, but there was one 2GB file that kept reappearing in the cache folder even though it was no longer in the project. The XML file in the cache folder still had references to it in there so I can only assume that was the reason it kept showing up. I eventually had to delete and totally recreate the project from scratch to regain my lost disk space. This included having to sit thru a 6 hour long transcoding session which pissed me off to no end.
Encore CS3 appears on the surface to be a very powerful, feature rich, and approachable app with a simple easy to use interface, but it is awfully bugged in just about every area I have explored and still needs lots and lots of work for it to be really useful. Frankly for me it is pretty damn annoying that I have invested so much money in this suite only to find several of the apps in it (Encore & Premiere in particular) behaving this poorly. In my opinion every single app in the suite exhibits lousy performance whenever you must do anything at all involving the disk from the time you click to start it up until the time you click to close it down. Several of them are just as seriously bugged as Encore too, and being a long time Photoshop v5.5 user I expected much more from Adobe. Even Photoshop is two or three times as slow now (e.g. it takes about 20-30 seconds to simply create an empty 500x500 pixel image file and almost a full minute to load a 30x60 pixel single-layer gif). So far I have attempted to create 6 DVDs using Encore and after 3 weeks of effort have only succeeded in getting one of them onto a final disk -- and that one is kinda limping to work correctly in my DVD player. Three of those projects became so corrupted while working on them that I had to delete them completely and recreate them from scratch, only to find that I still couldn't get them to completion for one reason or another. Seriously disappointing.

Bug: Lightroom 3.3 hang when importing video

On Windows, Lightroom 3.3 will hang when importing .AVI videos when the following is true:
- Move or Copy (not Add)
- Rename Files is selected
- Filename pattern includes "exposure"
Changin to a pattern that only includes date and time will make the import succeed.

If it really failed in ntdll.dll it might be a system issue. Make sure you disable all real-time anti-virus processes, and make sure your Windows system is up-to-date.
Otherwise, it will be hard to know what is going on. If it persists, open a support ticket with Adobe. Take a look in the event viewer to make sure you have all the details of the crash.

Iphoto hang while importing photos

Hi, my iphoto in macbook air hang while importing half way.
i cant quit the iphoto now.
pls advise hw can i shut down?

I recovered the pictures in "Today" but they are damaged. You see the pictures in iPhoto but they are very small and there is no information about the picture availabe (shuttertime, diafragma etc).
Those are not your photos, only the thumbnails used for display.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

LR 1.4.1 Hangs on Import

Importing from SD card or from folder on hard drive, LR 1.4.1 hangs on import into an existing catalog. Sometimes it imports 1 picture, sometimes more, and then it hangs. Canceling the import does not work.
This is a Vista machine with plenty of horsepower and disk. I've re-installed LR, rebooted, etc. Importing into a brand new catalog works perfectly. Importing into another application works perfectly. The problem arose seemingly out of nowhere. Never had a problem, went out of town for a few days, returned with some pictures, and then no import into my existing catalog.
The problem appears to be a corrupted catalog. Any ideas on what to do from here? Thanks. JJB

Does it matter if they are JPGs or RAWs?
When you say it hangs, how "hung" is it? Does the mouse stop moving, or is everything else response, except Lightroom? Do you get a "Not Responding" indication in the title-bar? If you bring up Task Manager and add Page Fault Delta and Virtual Memory as columns, do you see any activity in CPU or Page Faults for Lightroom, and/or does the memory used fluctuate or slowly increase? Is anything else taking lots of CPU while LR is supposed to be importing, or is System Idle running close to 100%?
Do the previews come up ok on the import panel?
A large catalog may just take longer to import into, or like you say it could be corrupt. Have you tried importing into a previous backup, if you have some LR 1.4.x ones from earlier? Make a copy of the backup catalog, somewhere, open that copy, and try importing.
You might try creating a new catalog, and importing everything from your old catalog (if that was an option in LR 1.x), and then importing new images into that and see if it acts different.
Have you done an Optimize and Relaunch from the Catalog Preferences panel?

LR3 Hangs during import

I have an iMac Core Duo 32 bit OSX 10.6.8 all updates current. 2GB RAM. LR3.6 used to run fine on this machine. I didn't use LR3 for some time then on coming back to it I notice that it would hang on importing images from a memory card. Computer and card etc all running well otherwise. LR3 would import several of the images then stop. Indefinite beachball on trying to close LR3 so had to Force Quit. On restarting LR3, it stops at the splash screen and needs Force Quit to get out of it.
However, if I Force Quit the MassStorageCamera app using the Activity Monitor, LR3 runs fine again! No problem, unless I try to re-import. There is no problem importing from the hard disk if I first copy the same images from the SD card. AS LONG AS MASSSTORAGECAMERA is not running! If Mass StorageCamera is running, LR3 will hang even if importing from the hard disk. There are 2 small AVI files on the SD card which were copied to the hard disk so that's not a factor.
So, I surmise that MassStorageCamera was updated during the time I was not using LR3 and now there is some incompatibilty between it, LR3 and my Core Duo system. I'm guessing there's an updates MassStorageCamera app, probably for Lion, that has broken LR3 on my system.
AppleMenu/About This Mac/More Info/Software/Applications/MassStorageCamera shows version 6.1 4/26/12 Universal 64 bit.
Any thoughts?

I have an iMac Core Duo 32 bit OSX 10.6.8 all updates current. 2GB RAM. LR3.6 used to run fine on this machine. I didn't use LR3 for some time then on coming back to it I notice that it would hang on importing images from a memory card. Computer and card etc all running well otherwise. LR3 would import several of the images then stop. Indefinite beachball on trying to close LR3 so had to Force Quit. On restarting LR3, it stops at the splash screen and needs Force Quit to get out of it.
However, if I Force Quit the MassStorageCamera app using the Activity Monitor, LR3 runs fine again! No problem, unless I try to re-import. There is no problem importing from the hard disk if I first copy the same images from the SD card. AS LONG AS MASSSTORAGECAMERA is not running! If Mass StorageCamera is running, LR3 will hang even if importing from the hard disk. There are 2 small AVI files on the SD card which were copied to the hard disk so that's not a factor.
So, I surmise that MassStorageCamera was updated during the time I was not using LR3 and now there is some incompatibilty between it, LR3 and my Core Duo system. I'm guessing there's an updates MassStorageCamera app, probably for Lion, that has broken LR3 on my system.
AppleMenu/About This Mac/More Info/Software/Applications/MassStorageCamera shows version 6.1 4/26/12 Universal 64 bit.
Any thoughts?

Aperture hangs on imports and other stability issues

My aperture will hang on imports, does not like me to do anything else at all when importing, lest it hang and if it hangs once and I force quit I have to restart the system to make it work again. I have had 5 crashes today and really PO'd. This is 1.5.6 and I am running 10.5.5.

Have you done anything to the files before importing them? In particular I'm thinking about giving them keywords through Bridge or LightRoom?
I have experienced Aperture hanging until force quit if I had done keywording to the (in my case) DNG's via Bridge / LightRoom prior to importing them into Aperture.
Regards
Paul K

Lightroom 4.2 hangs on import

Hi Canon 5d3with a fast CF card. I plug the camera into my Windows 7 laptop, fire up Lightroom 4.2, hit import, and all the new photos are tagged for import. I press import and 4 or 5 photos import and Lightroom just hangs without importing any others. The program shows as still responding in the Task Manager. I close the program, detach and reattach the camera and get another 4 or 5 photos. So if I have a bust day of shooting I have to go throgu this process many times to get of my photos imported. Where do I start fixing this?
thanks

Try copying the files to your hard drive from Windows Explorer. Then try importing them into Lightroom from the hard drive.
Do you get the same behavior in either case?

Random hanging while import?

I'm not sure what's going on but recently, my Aperture library is getting a lot of hanging while importing. It happens both with my camera and even when just importing photos from a local folder. The library is located in a thunderbolt external drive. Usually I have to force quit aperture because once the import hangs there's no way to stop it. Normal quiting of the application will get stuck "cancelling". How do I fix this?

leonieDF wrote:
. I copied all the files first to the desktop and then imported into aperture, still the same hang at "saving preview...".
The hang at "Saving Preview" typically occurs if one image is being processed, that has a corruption and cannot be processed.
Aperture is processing the previews in the background. That may take a long time. Before you force quit Aperture and suspect a hang, look at the filename in the Activity viewer. If it is hanging at the same filename without getting the preview created, then export the original as original, not the edited version delete that file from Aperture. Check that file in another program and make sure you do not import that particular file again.
Have a look at the screenshot Mr. Spork posted. You can see the name of the currently processed file in the panel. If ithis name does not change for hours, then you have found the file that is making Aperture unresponsive or hang.
Second test, I created a new aperture library immediately after the hang and imported the same folder of files. No hanging.
You cannot be sure, until the processing of all the previews has finished.
If you isolate the file that causes the hang and check only importing that particular file in a separate library and that works well, then you know that it is the library and not the image.
If it is the library, try rebuilding the library instead of repairing. Make a backup of the library before trying that.
No as I mentioned above. If I force quit Aperture, repair the database, the same files will import just fine. So the problem is not with the files.
Also I cannot rebuild the library, because that will reset all my curves. Any other fix?

CF9 installer hangs on import wizard

I'm working on a windows box installing CF9. The import wizard is hanging on "Import Settings". It just sits there. Whats worse, when I try to access the CF admin all it brings up is the same wizard! Is there a known way to bypass/fix this issue?
Thanks!

A restart of the box worked
First rule of computing: restart 3 times and rub cheetah blood on it.

Creative MediaSource Organizer hangs while importing tracks to PC Music Libr

I purchased a NOMAD Jukebox Zen 60GB sometime ago and I finally got into putting my music into it. I downloaded and installed Creative Media Source version 2.03.29. I have all my music files in a folder in my roommates desktop computer available on our home network, because my laptop hard dri've is not big enough to store all files. I click on the Import button and select Import Tracks, and the Creative Import Wizard dialog pops up. I select the mapped network dri've where all my music files are and click Add Folder, and the wizard correctly finds all my music files and lists them on the list on the right side.
First time I tried this, I tried importing all my music which meant it would add 000 files. I clicked Continue and the wizard displayed "Gathering files info and checking file existence in PC Mucis Library..." with the progress bar moving a little. The farthest the progress bar got to was under the th of the "Gathering..." Since I think I have a lot of music files, I waited for about 5 hours but the progress bar did not move further. I checked the task manager, the Applications tab said Creative Import was Running, and the Process tab indicated that the CTImport.exe process was using 98% CPU. I tried other times importing less music (5000 files, 000 files, as low as 500 files), and the progress bar seemed to move a little further with lower number of files, but I was still feel I waited longer than I should have and the process did not finish (I think I waited half-hour to an hour for 500 files). My laptop is not slow or very old, I use video conferencing applications and etc without a problem. Is this a known issue, any suggestions on how I can load my music to my PC Library to download to my jukebox player?
Any help is appreciated. Thanks

EAG wrote:
Thanks everyone for the replies. Allow me to add more information and make some more comments. I did try doing in batches. The?smallest number of songs I had tried was 500 and that seemed to?hang. I then tried 250?and that?worked at first. I got all excited, I would do them all 250 at a time if necessary, but when I tried importing the next 250 files?it got "stuck". Probably in the same place that it did when I tried 500 together.
This might suggest a corrupt tag/file. See if you can narrow down where it is and then analyse the file with something like MP3 Library.
But SSR suggestion made me realize that I can add the track/files without using the import feature, by just dragging and droping from My Computer mapped dri've. It looks like I can add the files to the PC Music Library or the MP3 directly by drag and drop. I was hoping to use the PC Music Library first, so that I could fix files that are not tagged properly, rate some music,?set the Genre (I have a lot of foreign music, so I could differentiate them by nationality in the Genre), etc and them I could also use when transferring to my memory based/jogging mp3 player as well. But it looks like I might be able to fix the tags directly on the player as well (I have a feeling this might be slower, take more time). I can drag single items (I'll do one by one if that's what it takes), but I saw that I can also drag multiple items (so that will cut down manual labor). I just hope that it won't get stuck once I get close to droping the 500th item. I didn't get a chance to try because I had to come to work, I'll try later and let everyone know.
Don't edit the files on the player. If you copy the files back to the PC the changes will be lost unless you use a special update feature in MediaSource 3.

LR 4.4.1 on Win 8.1 suddenly started to hang when importing via usb from camera

I'm running LR 4.4.1 on Win 8.1 on a fairly new toshiba laptop. Worked fine for a few months; but then I have been unable to solve the problem of Lightroom hanging when I try to import directly from my camera via USB. If I download pics from the camera using file manager, and then point LR at the new folder [once the camera is unplugged], it can then see the folder on the hard drive and will import them without issues. But if the camera is installed, going to the import screen hangs the application.
I have tried:
deleting the lock file
installing and running LR 5
reinstalling LR 4disabling all the usb drivers, rebooting, and enabling
disabling everything in the start menu
deleting the preferences file and letting LR build a new one..
I can import from the SD card reader, but I nervous about that as I have had card corrupted before and lost pics when downloading that way with other laptops.
The camera is a Sony NEX-5N.
Any ideas?
Thanks!
Steve
>>>>>>>>>>>>>>>>
event log
Version=1
EventType=AppHangB1
EventTime=130472785590834411
ReportType=3
Consent=1
UploadTime=130472785614981131
ReportIdentifier=e398cb4c-f441-11e3-8274-0c54a53b1677
IntegratorReportIdentifier=e398cb4d-f441-11e3-8274-0c54a53b1677
NsAppName=lightroom.exe
Response.BucketId=d13f242875f03ea1d90dc78320aec669
Response.BucketTable=5
Response.LegacyBucketId=-441099843
Response.type=4
Sig[0].Name=Application Name
Sig[0].Value=lightroom.exe
Sig[1].Name=Application Version
Sig[1].Value=4.4.0.11
Sig[2].Name=Application Timestamp
Sig[2].Value=514b016c
Sig[3].Name=Hang Signature
Sig[3].Value=d6ad
Sig[4].Name=Hang Type
Sig[4].Value=134217729
DynamicSig[1].Name=OS Version
DynamicSig[1].Value=6.3.9600.2.0.0.768.101
DynamicSig[2].Name=Locale ID
DynamicSig[2].Value=1033
DynamicSig[22].Name=Additional Hang Signature 1
DynamicSig[22].Value=d6ad1c1631f1be3fa0be5f93b4b2ce60
DynamicSig[23].Name=Additional Hang Signature 2
DynamicSig[23].Value=8549
DynamicSig[24].Name=Additional Hang Signature 3
DynamicSig[24].Value=8549c91a68f857408d66008876c50f3c
DynamicSig[25].Name=Additional Hang Signature 4
DynamicSig[25].Value=5385
DynamicSig[26].Name=Additional Hang Signature 5
DynamicSig[26].Value=5385dfd8333f990f69c3337328fcba6e
DynamicSig[27].Name=Additional Hang Signature 6
DynamicSig[27].Value=fe0a
DynamicSig[28].Name=Additional Hang Signature 7
DynamicSig[28].Value=fe0aee3b66393cac999a4d8bcf79559c
UI[3]=Adobe Photoshop Lightroom 64-bit is not responding
UI[4]=If you close the program, you might lose information.
UI[5]=Close the program
State[0].Key=Transport.DoneStage1
State[0].Value=1
FriendlyEventName=Stopped responding and was closed
ConsentKey=AppHangXProcB1
AppName=Adobe Photoshop Lightroom 64-bit
AppPath=C:\Program Files\Adobe\Adobe Photoshop Lightroom 4.4\lightroom.exe
ReportDescription=A problem caused this program to stop interacting with Windows.
NsPartner=windows
NsGroup=windows8
ApplicationIdentity=DBF4960C829DDF3499464309618C63A9
<moved from downloading,installatin,setting up - kglad>

You must have Premier Elements that recognizes Videos. Premier Elements is sometimes sold in tandem with Photoshop Elements so that both can operate seamlessly.
Amazon has got special price for buying both packages together. I believe it is a difference of about $20, i.e. you pay 20 bucks more if you buy both products.

Hang on import

Hi,
I have a issue on importing pictures in Photoshop Lightroom.
When I try to import the pictures from disk or from CF Card Lightroom is hanging on won´t respond again.
What I´ve already tried is
Unplug all external USB devices (There is no smartphone or anything else plugged in)
Renamed the preferences setting file and let Photoshop create a new one
Reinstall the USB Controller Driver
Reinstall Lightroom completely
I plugged in a external card reader on a rear USB port, trying to get a workaround for importing via autorun.
This worked !
Right After that, importing Pictures from Disk worked also like a charm !
Now the same issue is back and Lightroom is hanging again.
My clue is, it has to be a USB issue !?
The problem occured first with lightroom 3.6, after reinstall with version 3.2 the problem was persisting.
I´ve read from issues of the same kind with Lightroom 4.x also.
Operating System is Windows 7 X64 SP1
Virus protection is Bitdefender

Timothy: Like you I was just now trying to download from a card and got the spinning beach ball. Could also not get LR to Force Quit. I'm on a MAC G5 Dual 2.0 w/ 4 gigs RAM. --Frank

IPhoto 9.6 hangs when importing raw files.

since upgrading to Yosemite and upgrading iPhoto my macbook pro hangs every time I try to import photos from an SD card. I can import one or two but if I try to import new photos ~300 photos then the kernel task memory usage shoots up to use 95% or more of memory and then it starts running extremely slow and the memory pressure jumps between yellow and red. If I kill iPhoto the kernel task doesn't release the memory.
I have tried uninstalling iPhoto and and restoring and rebuilding the iPhoto library but to no avail at this point.
Anybody have any other ideas or know if there is a bug with iPhoto 9.6 processing raw files?

EtreCheck version: 2.0.6 (91)
Report generated October 20, 2014 at 1:06:31 PM EDT
Hardware Information: ℹ️
MacBook Pro (13-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2-core
10 GB RAM Upgradeable
BANK 0/DIMM0
8 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 512 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 15:20:54
Disk Information: ℹ️
ST1000LM014-1EJ164 disk0 : (1 TB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Untitled (disk1) / [Startup]: 998.97 GB (454.39 GB free)
Core Storage: disk0s2 999.35 GB Online
MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
Apple Computer, Inc. IR Receiver
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Extensions
[loaded] com.sophos.kext.sav (9.2.50 - SDK 10.8) Support
[loaded] com.sophos.nke.swi (9.2.50 - SDK 10.8) Support
Startup Items: ℹ️
rEFItBlesser: Path: /Library/StartupItems/rEFItBlesser
Startup items are obsolete and will not work in future versions of OS X
Problem System Launch Agents: ℹ️
[failed] com.apple.AirPlayUIAgent.plist
[failed] com.apple.bird.plist
[failed] com.apple.CallHistoryPluginHelper.plist
[failed] com.apple.CallHistorySyncHelper.plist
[failed] com.apple.coreservices.appleid.authentication.plist
[failed] com.apple.EscrowSecurityAlert.plist
[failed] com.apple.pluginkit.pkd.plist
[failed] com.apple.recentsd.plist
[failed] com.apple.sbd.plist
[failed] com.apple.scopedbookmarkagent.xpc.plist
[failed] com.apple.security.cloudkeychainproxy.plist
[failed] com.apple.spindump_agent.plist
[failed] com.apple.telephonyutilities.callservicesd.plist
Problem System Launch Daemons: ℹ️
[failed] com.apple.awdd.plist
[failed] com.apple.ctkd.plist
[failed] com.apple.diagnosticd.plist
[failed] com.apple.icloud.findmydeviced.plist
[failed] com.apple.ifdreader.plist
[failed] com.apple.installd.plist
[failed] com.apple.nehelper.plist
[failed] com.apple.periodic-daily.plist
[failed] com.apple.softwareupdated.plist
[failed] com.apple.spindump.plist
[failed] com.apple.tccd.system.plist
[failed] com.apple.wdhelper.plist
[failed] com.apple.xpc.smd.plist
Launch Agents: ℹ️
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.sophos.uiserver.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[running] com.oracle.java.JavaUpdateHelper.plist Support
[running] com.sophos.common.servicemanager.plist Support
User Launch Agents: ℹ️
[running] com.amazon.music.plist Support
[loaded] com.facebook.videochat.[redacted].plist Support
[loaded] com.google.keystone.agent.plist Support
User Login Items: ℹ️
InfoPlist.strings DocumentHidden (/System/Library/Input Methods/VietnameseIM.app/Contents/Resources/Preferences.prefPane/Contents/Resou rces/ro.lproj/InfoPlist.strings)
Google Drive Application (/Applications/Google Drive.app)
Google Chrome Application (/Applications/Google Chrome.app)
Internet Plug-ins: ℹ️
AmazonMP3DownloaderPlugin1017277: Version: AmazonMP3DownloaderPlugin 1.0.17 Support
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 2.4.0.11 Support
Silverlight: Version: 5.1.30317.0 - SDK 10.6 Support
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
AmazonMP3DownloaderPlugin: Version: AmazonMP3DownloaderPlugin 1.0.17 Support
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
CouponPrinter-FireFox_v2: Version: Version 1.1.6
JavaAppletPlugin: Version: Java 7 Update 71 Check version
User Internet Plug-ins: ℹ️
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
Picasa: Version: 1.0 Support
WebEx64: Version: 1.0 - SDK 10.6 Support
3rd Party Preference Panes: ℹ️
Flash Player Support
Flip4Mac WMV Support
Java Support
MySQL Support
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Destinations:
Time Machine Disk [Local]
Total size: 1 TB
Total number of backups: 5
Oldest backup: 2014-05-31 19:12:14 +0000
Last backup: 2014-10-17 02:13:59 +0000
Size of backup disk: Excellent
Backup size 1 TB > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
      8% mds
      4% WindowServer
      1% com.apple.WebKit.Plugin.64
      1% InterCheck
      1% loginwindow
Top Processes by Memory: ℹ️
54 MB com.apple.WebKit.Plugin.64
43 MB InterCheck
32 MB WindowServer
32 MB Messages
21 MB soagent
Virtual Memory Information: ℹ️
28 MB Free RAM
505 MB Active RAM
489 MB Inactive RAM
8.69 GB Wired RAM
6.64 GB Page-ins
89 MB Page-outs

Hang on import on OS X

Similar Messages

Maybe you are looking for