Hanging (MBP mid-2009, clean upgrade)

Hi all,
My mid 2009 MBP (8GB Ram) keeps hanging for a few seconds randomly. Console shows this:
1/15/13 8:14:03.000 AM kernel[0]: USBF:
11888.793
AppleUSBOHCI[0xffffff802e807000]::SuspendUSBBus Processing WDH before suspending
1/15/13 8:14:04.000 AM kernel[0]: [0xffffff8042858c00](1)/(5) Device not responding
1/15/13 8:14:04.000 AM kernel[0]: com_apple_driver_AppleUSBCardReaderUMC:: Stop::Controller Reset
1/15/13 8:14:04.000 AM kernel[0]: USBF:
11890.101
AppleUSBOHCI[0xffffff802e807000]::SuspendUSBBus Processing WDH before suspending
1/15/13 8:14:05.000 AM kernel[0]: USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833
1/15/13 8:14:05.000 AM kernel[0]: USBF:
11891.244
AppleUSBOHCI[0xffffff802e807000]::SuspendUSBBus Processing WDH before suspending
there are thousands of the *USBOHCI* entries, but every freeze seems to produce the "Device not responding" sequence.
Would appreciate any suggestions. Have checked for processes using excessive CPU/memory; there are none. A full process list is below:
3063
Console
Rahul
6.3
6
66.2 MB
Intel (64 bit)
2954
Activity Monitor
Rahul
2.4
5
16.7 MB
Intel (64 bit)
208
pbs
Rahul
2.0
6
4.5 MB
Intel (64 bit)
4028
Safari Web Content
Rahul
1.3
14
262.9 MB
Intel (64 bit)
161
Microsoft Word
Rahul
0.4
4
113.8 MB
Intel
252
Dropbox
Rahul
0.1
22
70.2 MB
Intel
4966
SophosUIServer
Rahul
0.1
6
11.6 MB
Intel
168
Finder
Rahul
0.1
5
81.4 MB
Intel (64 bit)
149
distnoted
Rahul
0.0
5
4.6 MB
Intel (64 bit)
248
SyncServicesAgent
Rahul
0.0
5
20.8 MB
Intel
159
Google Chrome
Rahul
0.0
34
190.1 MB
Intel
261
Microsoft Database Daemon
Rahul
0.0
3
11.9 MB
Intel
202
Google Chrome Worker
Rahul
0.0
5
54.5 MB
Intel
62
loginwindow
Rahul
0.0
2
28.2 MB
Intel (64 bit)
148
UserEventAgent
Rahul
0.0
3
9.5 MB
Intel (64 bit)
290
CIJScannerRegister
Rahul
0.0
5
6.9 MB
Intel (64 bit)
201
Google Chrome Helper
Rahul
0.0
4
79.2 MB
Intel
4021
com.apple.iCloudHelper
Rahul
0.0
4
5.8 MB
Intel (64 bit)
1905
dbfseventsd
Rahul
0.0
1
172 KB
Intel
4972
QTKitServer-(4028) Safari Web Content
Rahul
0.0
2
3.9 MB
Intel
4025
Safari
Rahul
0.0
15
159.5 MB
Intel (64 bit)
204
Google Chrome Worker
Rahul
0.0
5
32.3 MB
Intel
200
CalendarAgent
Rahul
0.0
5
47.9 MB
Intel (64 bit)
143
launchd
Rahul
0.0
2
1.5 MB
Intel (64 bit)
205
Google Chrome Worker
Rahul
0.0
6
31.3 MB
Intel
1965
helpd
Rahul
0.0
2
2.2 MB
Intel (64 bit)
251
GrowlHelperApp
Rahul
0.0
3
18.7 MB
Intel (64 bit)
269
ShareKitHelper
Rahul
0.0
2
20.0 MB
Intel (64 bit)
183
storeagent
Rahul
0.0
4
9.8 MB
Intel (64 bit)
165
Dock
Rahul
0.0
5
60.5 MB
Intel (64 bit)
194
imagent
Rahul
0.0
4
6.1 MB
Intel (64 bit)
4020
syncdefaultsd
Rahul
0.0
4
12.6 MB
Intel (64 bit)
187
xpcd
Rahul
0.0
2
6.0 MB
Intel (64 bit)
162
Firefox
Rahul
0.0
1
20 KB
Intel (64 bit)
1747
mdworker
Rahul
0.0
5
19.3 MB
Intel (64 bit)
209
AppleSpell.service
Rahul
0.0
3
8.3 MB
Intel (64 bit)
166
talagent
Rahul
0.0
2
13.7 MB
Intel (64 bit)
227
Google Chrome Worker
Rahul
0.0
5
71.7 MB
Intel
270
lsboxd
Rahul
0.0
2
1.9 MB
Intel (64 bit)
184
usernoted
Rahul
0.0
2
3.3 MB
Intel (64 bit)
188
Notification Center
Rahul
0.0
3
13.3 MB
Intel (64 bit)
3928
CVMCompiler
Rahul
0.0
2
3.6 MB
Intel (64 bit)
242
AirPort Base Station Agent
Rahul
0.0
4
2.0 MB
Intel (64 bit)
156
pboard
Rahul
0.0
1
916 KB
Intel (64 bit)
192
accountsd
Rahul
0.0
2
5.2 MB
Intel (64 bit)
253
Lexmark Button Monitor
Rahul
0.0
3
3.2 MB
Intel
4979
com.apple.audio.SandboxHelper
Rahul
0.0
2
4.1 MB
Intel (64 bit)
167
SystemUIServer
Rahul
0.0
8
38.0 MB
Intel (64 bit)
289
Image Capture Extension
Rahul
0.0
2
9.9 MB
Intel (64 bit)
325
PepperFlashPlayer (Chrome Plug-In Host)
Rahul
0.0
4
32.0 MB
Intel
239
AppleIDAuthAgent
Rahul
0.0
3
1.9 MB
Intel (64 bit)
1659
Terminal
Rahul
0.0
5
17.8 MB
Intel (64 bit)
257
Microsoft AU Daemon
Rahul
0.0
2
3.4 MB
Intel
153
fontd
Rahul
0.0
2
4.9 MB
Intel (64 bit)
189
com.apple.dock.extra
Rahul
0.0
2
16.6 MB
Intel (64 bit)
164
Mail
Rahul
0.0
1
20 KB
Intel (64 bit)
254
LxkNetworkServices
Rahul
0.0
5
3.1 MB
Intel (64 bit)
4980
com.apple.audio.ComponentHelper
Rahul
0.0
2
4.5 MB
Intel (64 bit)
229
maspushagent
Rahul
0.0
2
5.1 MB
Intel (64 bit)
186
tccd
Rahul
0.0
2
3.1 MB
Intel (64 bit)
247
SpotifyWebHelper
Rahul
0.0
3
3.3 MB
Intel
179
NetworkBrowserAgent
Rahul
0.0
3
4.5 MB
Intel (64 bit)
3926
cookied
Rahul
0.0
2
2.8 MB
Intel (64 bit)
1782
printtool
Rahul
0.0
2
2.2 MB
Intel (64 bit)
147
cfprefsd
Rahul
0.0
4
6.9 MB
Intel (64 bit)
Thanks!

If you get those resets with no external USB devices connected, then they're apparently caused by an internal malfunction. The device identified as the culprit in the log is the card reader.
Make a "Genius" appointment at an Apple Store to have the machine tested.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed.

Similar Messages

  • MBP mid 2009, Mountain Lion and PRESONUS FP10

    Hello!
    I have an opportunity to buy used Presonus FP10, but I am not sure is it completely compatible with my MBP - mid 2009, CORE 2 DUO and Mountain Lion and Logic Pro 9???
    It is very good interface but a bit outdated, so I am worried! I don't want to spend my money if it won't work on my MAChine!
    Thank you!

    Hi, Damon
    I gave up from buying it. As I didn't get any valid information about FP, I stopped thinking about it. I've been looking all over the Internet and came up with Focusrite Saffire Pro 40. Somehow, I find it even better choice, so we will see it tomorrow! I hope it is boxed with Firewire Adapter (400-800), too. It is 777 KM which is about 500 $.
    Is it worth the money?
    If it is compatible with Lion, I assume it should work with ML, too!

  • Have a MBP mid 2009, had mavericks, changed hard drive and now have 10.6.8 and can't update to mavericks again. Any help?

    Hi,
    I Have a MBP mid 2009, 8 Gb RAM, had mavericks, changed hard drive to get more space (500Gb) and couldn't restart from time machine so had to install Snow Leopard, now have OS 10.6.8 and can't update to mavericks again. Any help?

    You did not contact us. This is just a user to user forum where we try to help each other out. No one here works for Apple and as far as we know Apple do not even come here. Ring back the number you originally called on and ask for an explanation.
    Cheers
    Pete

  • MBP - 2.53GHz, mid 2009 - Ram Upgrade?

    I just bought a used MBP - 2.53GHz, mid 2009.  The Crucial.com app says I can upgrade to 8gb ram, but the system only seems to show that I can keep the current 4gb.  Which is accurate?
    Thanks!

    that's what Crucial says...
    But the apple page below says 4.
    http://support.apple.com/kb/HT1270?viewlocale=en_US&locale=en_US#link4

  • MBP Mid 2009 - Repair Battery Message

    Hi everyone.
    I have a Mid 2009 MBP running with Lion. I've notice a message that says "Repair Battery" under system preferences/battery.
    I didnt noticed anything strange with my battery life, but I want to know if I have to do something.
    Anyone got hint??
    Thanks

    Guess what. I decided to reboot the system, format the HD, and reinstall everything. Im now on Lion again, and the "service baterry" message has disappear.
    My baterry now claims:
    Battery Information:
      Model Information:
      Serial Number:          W0947B66C77YC
      Manufacturer:          SMP
      Device Name:          bq20z451
      Pack Lot Code:          0
      PCB Lot Code:          0
      Firmware Version:          3
      Hardware Revision:          3
      Cell Revision:          100
      Charge Information:
      Charge Remaining (mAh):          4402
      Fully Charged:          No
      Charging:          No
      Full Charge Capacity (mAh):          5209
      Health Information:
      Cycle Count:          346
      Condition:          Normal
      Battery Installed:          Yes
      Amperage (mA):          -1182
      Voltage (mV):          11817

  • Mbp mid 2009 noisy fans

    hi i have a mid 2009 mbp and the fans are very noisy can someone please help me

    The fans spin at speeds from 2000 RPM to 6000 RPM so that is within acceptable limits.
    However the question is what is the MBP CPU processing at the time.
    While I am responding to you at this time, the fans are spinning at 2000 RPM.  If you are playing video or a game, it's normal.  If you are performing lightweight tasks, it's not normal.
    You may be experiencing a runaway application. Check in ACTIVITY MONITOR the '%CPU' column for a process that may be showing an abnormal CPU percentage utilization.  If so a restart will usually cure the problem.
    Ciao.

  • MBP mid-2009 Freezing after Hard Drive upgrade -HELP!

    So, my Apple Care just ended and I was almost always at a full 320GB, so I decided to upgrade my hard drive to 1TB.  I purchased a Western Digital TB drive (9.5mm) at a store recommended by an Apple Genius and followed the instruction on youtube exactly, as well as having another visit to the Genius bar, ensuring I grounded myself often throughout the process. My computer is a 15" MBP originally loaded with Snow Leopard, now running OSX Lion.  I did a Time Machine backup prior to everything and also bought an enclosure for my old hard disk to use and it has yet to be wiped, but Disk Utility says that it's corrupt because 1 program's debug log says the number of files changed (after the time machine processing.) I did a Carbon Copy Clone prior to installing the hard drive as well, so when all was done, I was able to start the computer without issue.  (This program is what told me first that I had an issue with that debug log.  I'd tried to delete a huge folder that was taking up nearly 30GB before the clone, it was backed up on time machine and another backup drive.)
    However, after Vuze re-opened (which I'd just recently upgraded to Pro) it froze the computer, so I got the rainbow disk and even Force Quit did not work.  Since then, I've had to reboot with the top right button dozens of times.  Mail, Chrome and Vuze have all caused freezing and Command Option Escape does not work at all.  My beloved computer is starting to feel like a big brick.  I uninstalled and re-installed Vuze Plus since, but still have the same issues (trashing the program then re-downloading).  As for Disk Utility, it says the drive is just fine.  There are no software updates needed and that's about as far as I can get before things crash again.
    I would really appreciate any assistance that can be provided based on this scenario.  I hope I've provided enough detail, please let me know if more is needed.
    Thank you in advance. 

    The only thing that I can think of is that your SATA cable may be bad... it's the first thing that I would try replacing. DIsk Utility wouldn't be able to detect a bad SATA cable - you'd just have random freezes and crashes.
    I don't know that this is the solution to your problem, but it's the first thing I would attempt. 2009 models are notorious for having bad SATA cables - try PowerbookMedic and order a new one. If it doesn't fix the problem, call back.
    Good luck,
    Clinton

  • Has anyone installed the samsung 840 pro in MBP mid 2009?

    Hi All,
    My macbook doesnt work anymore because the HDD gave up. I now ordered the samsung 840 pro ssd. My mbp doesn't start up anymore and all I can see is the file boz and a ? mark. I have the CD that came with the macbook. Is it hard to install the software or should I just take it to apple and let them do the job?
    Also, I only bought the 128 GB since I cannot afford the 256g. I have a seagate 1 TB external hardrive. Can anyone please tell me what to do to set all downloads and other documents to save in the external so I am not using all the 128 g

    JS28,
    I installed a Samsung 840 PRO SSD in my Mid 2010 MacBook Pro. It’s not hard to install the software onto your SSD, though it will take some time to do so. I don’t know how much Apple would charge for that service, so the time vs. money tradeoff is something that you’ll need to decide.
    If you decide to do it yourself, what you’ll need to do is to boot your MacBook Pro from the grey installation DVD marked “Mac OS X Install DVD” that originally came in the box with your MacBook Pro; to do that, hold down the C key as you power up. Once you’ve booted up from the DVD, you’ll need to run Disk Utility to format your SSD as “Mac OS Extended (Journaled)”. Once it’s been formatted, you can then install the version of Mac OS X that is on that DVD, either Leopard or Snow Leopard. Once your MacBook Pro’s original version of Mac OS X is installed on the SSD, you can then reboot from the SSD, and optionally install the iLife applications from the “Applications Install DVD” — the other grey installation DVD that came with your MacBook Pro.
    Next, you’ll  need to upgrade or update your OS to Mac OS X 10.6.8, which in turn will allow you to access the App Store, so that you can redownload Mountain Lion for installation. Once you’ve installed Mountain Lion on your SSD, it will then have the Mountain Lion recovery partition installed also.
    To ensure that your downloads and documents are saved to your external Seagate HDD, be sure to choose a location on that drive whenever you download a file or save a document. Each application that you use will probably need to be set to download/save to your external HDD, but each of them should remember that external HDD location for future downloads/saves.

  • MBP mid 2009 sudden HDD issues / slow and unresponsive

    Hello all,
    First of all i want to apologize if there was a similar topic, but ive tried looking with no result. I am in a big crisis and i think this forum is my only way of finding a solution.
    The problem started yesterday, when all of a sudden my computer became unresponsive (finder and apps), although music from itunes continued playing. I had no choice but to **** it down with the button.
    When i turned it back on, i got the blinking folder with the question mark. Tried all the advice with no success. Then i opened the computer, checked the flex cable and the hdd which both seemed fine. Closed it back up, started it up again and the same story. Then i moved the computer after half an hour and the thing booted normally. The only obvious thing was that programs tended to freeze for a minute or two and i get the umbrella and then it works.
    Since im a photographer i have lots of work on it and immediately bought an external hdd for backup. Time machine wasnt successful since it worked so slowly and it worked on intervals. 2 mins of copying, 5 mins of nothing and really slow ( the hdd graph in activity monitor showed continious spikes with a flat line inbetween. I gave up on that and now im copying the important stuff manually which seems to be working fine.
    However the computer still has a big issue - i am hoping its the flex cable, since it suddey started working. In case of hdd failure i dont think i would be able to get back in and use it? The hdd is a year old, its the seagate hybrid - momentus 750xt and the os is mountain lion.
    Does anyone have a clue or a tip what to do? I have to order the flex cable via ebay since there are no authorised deLers for apple that have spare parts available here in Lisbon, Portugal. Im afraid making a clean install wont help , although on a windows computer id do that the first thing..
    Thanks a lot for any help, im desperate and i have a few weddings to edit this month, and since i study abroud this is the only xomputer i can use!
    Regards, Jaka

    It does seem to be the internal cable or connection is faulty, but only on an intermittent basis. 
    My suggestion is to backup your data on an external HDD using Disk Utility>Restore or Carbon Copy Cloner.  This will create a drive that will enable you to boot your MBP and use it externally until you get your cable replaced.
    Ciao.

  • MBP (mid-2009) freezing, slow installations and file transfer

    I bought the latest MacBook Pro model and installed Snow Leopard on a cleanly formatted hard drive. I have tried migrating via ethernet and FireWire from my iMac, but the migrations failed either due to freezing (via FireWire after roughly 24 hours of file transfer) or by an error message (ethernet with Migration Assistant).
    Only through a Time Machine backup was I able to transfer my account files to the MBP, which again totaled at over 20 hours of transferring. The system was a mess, clogged constantly by freezing and spinning beach balls of death for durations lasting around 10-20 seconds during which music would clip after 5-10 seconds of everything not responding, this being accentuated especially during installations. I decided to format and try anew.
    Now I've formatted the hard drive, installed Snow Leopard and will transfer my files manually onto a clean account. Installations take a long time although SL installation is within 30 minutes, iLife took 1.5 hours to install 5 GB. During the installation Safari stopped responding, as did the entire system, and the spinning beach ball would keep spinning. Watching a 480p trailer in Quicktime made the entire computer freeze up (no video/audio) for 10 seconds halfway. Transferring 136 GB (my Music folder) will take around 15 hours according to the estimate after 10 minutes of transferring.
    I've sold my iMac now and all I have are the files on my external hard drive. I want to get them onto my MBP ASAP but the slowness is preventing me from doing what needs to be done and it's very frustrating. When I try to boot into Hardware Testing by holding D down the computer doesn't do it no matter what (Application DVD in or not, plugged into power or not). I've tried resetting PRAM but I get the same inaction.
    Any ideas?
    Edit: I've done Disk Utility to no avail, it finds nothing wrong.

    Installed, still getting freezes with spinning beach balls. Transfer says it would take 1 hour opposed to that 15 hours, but it stops transferring after X amount of gigabytes (from 0.5 to 5), not do anything for a while and then continue, stretching the estimate to over 2 hours after some time. I don't know if this is just with the hard drive.
    The freeze-ups are frustrating as **** and make for a very poor experience. Any ideas to get to the bottom of this? I still haven't been able to boot into the Hardware Test no matter how much I try.

  • Audio not working...MBP mid 2009 to HDMI

    I have my MBP hooked to Sharp Model LC-C32370 with Mini Displayport to HDMI cable(belkin), using Belkin Aux cable plugged into MBPro's headphone port and then to TV....audio still not working. Any suggestions?

    On the Thunderbolt to HDMI converter/cable I have for mine, the volume controls don't work in System Preferences. As per the maker's indications, I use the Audio MID Setup utility to control it. Yours may work likewise.

  • MBP mid-2009 going to sleep by it self

    Hi,
    since I updated to Yosemite my MBP has been going to sleep by it self, I will say every 15min or so. Before it goes to sleep it ask me if I want to close all my programs and it gives me 59sec. to make a decision.
    I have set my computer to never go to sleep, either charging or not, and stills doing this. I find it really annoying because if i'm not in my computer it will close all my programs and I will have to open everything again.
    Any help on this??
    thx

    Greetings jchapui,
    If you are having an issue with your MacBook Pro going to sleep unexpectedly, I would suggest resetting the computer's System Management Controller. This article explains how -
    Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
    Sepcifically -
    Resetting the SMC on portables with a battery you should not remove on your own
    Note: Portable computers that have a battery you should not remove on your own include MacBook Pro (Early 2009) and later, all models of MacBook Air, and MacBook (Late 2009).
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer.
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
    Thanks for using Apple Support Communities.
    Be well,
    Brett L 

  • MBP-mid 2009-T-style MagSafe charger faulty?

    Ok... I've read through several of the 'issues' folks are having with their MBPs and charging. My mother has a brand new MBP--bought this month--September 2010, and it came with the newer L-style MagSafe charger. My husband and I, each have a one year old MBP with the older T-style MagSafe charger.
    Noticing odd charging results, and what appeared to be a very shortened battery 'life,' I feared that my MBP was having some serious charging/battery issues. But, I thought I'd try some simple troubleshooting tactics before I drove 50 miles to our nearest Genius Bar. So, I plugged my charger into my MBP and a 'safe' wall outlet and watched it over several days. Here's what I've discovered so far...
    The little LED indicator light on my MagSafe charger will come on Green, turn Amber, go off, come back on, etc... all the while it is sitting securely--undisturbed--at an outlet that is working properly. My MBP will announce that it is 'Not Charging,' or 'Calculating,' and/or show inconsistent time left to charge. My T-style MagSafe charger will charge when inserted only one way--top up and bottom down... I've 'marked' it so I can tell which way will work... if I insert the charger with the 'bottom' up then the little LED light does not light up at all. There are no dirty/broken/bent connectors or connections. This is not how it worked originally, and it is not how my husband's T-style MagSafe charger works currently. In fact, the charger he has works without hesitation in my MBP, regardless of which side is up or down. With no unexpected changes in the LED light or the status while it is plugged into the same outlet on the wall and the same female receiver on my MBP.
    My mother's L-style charger works perfectly in my MBP also... again, regardless of whether I point the cord toward the back of the MBP or toward the front of the MBP. It lights up wonderfully and charges quickly. We also purchased *speck clear hard-shell covers to protect the outside of all three of our MBPs. My husband and I bought ours along with our MBPs last year -- and my mother purchased hers at the same time she bought her MBP this month. Oddly, the *speck cover has been modified to fit the newer MagSafe power connectors, to ensure that the cord curls behind the MBP.
    So, it appears that the battery in my MBP is capable of charging and holding a charge just fine as long as I use these other chargers available to me. The obvious conclusion is that the MagSafe charger I received with my MBP is faulty. And, I also believe that this is something Apple must be aware of, since the style of the MagSafe charger -- and the *speck covers have been modified and/or redesigned.
    In the following 'support' article, it seems that Apple could be admitting this possibility when they mention that the cord may be replaced whether in or out of warranty? I just thought folks should know that for some of these continuing power problems... you might want to have the MagSafe chargers checked before you decide the problem lies in the MBP?
    http://support.apple.com/kb/TS1713
    If Apple is aware of this problem, it would be noble of them to simply admit that some of the MagSafe chargers are faulty--it happens, no big deal--and offer customers a replacement. If I had not discovered what was at the root of my problem -- and instead -- had taken my MBP in for repair, calibration, etc. and then found out that it was basically just the 'power cord' at fault... GRRRR... I would be very frustrated.
    Good luck!

    The older T-style adapters (that originally came with the non-Unibody MBPs) definitely had problems with their strain relief failing. My friend and I had to replace ours within about 3 months of buying a MBP. Apple actually kindly replaced this for me through AppleCare even before that article existed.
    My new T-style connector does not seem to be failing yet, but I have not owned the laptop for that long.
    As for your charging problem, it does sound like the MagSafe connector is faulty. However, I would bring your laptop along to the Apple Store anyways and verify that the replacement charger actually works with your laptop. While it may not appear externally there is anything wrong with the charging port on your laptop, even microns of misalignement due to various factors (Magnet strengths, manufacturing tolerances between the connector pins, etc) can potentially cause the electric flow to stop.

  • I Have  "New" MBP (Mid 2009) and Would Like to Use Airport Extreme

    This might be a very basic question , but I do not know the answer so I came to some experts for help. I have a "new" MBP OS 10.6.4 SL. I received it about 1 month ago after the genius bar could not fix a 3 year-old MBP. At one time the Airport Extreme was hooked up when I first got the 3-year-old MBP, but I kept running into troubles with it so I purchased a Verizon MiFi2200.
    I have this new MBP, I still have the MiFi2200 from Verizon which I access via Airport. I would like to try the 3 year-old Airport Extreme again, but I am wondering if having the Verizon MiFi2200 will allow me to also have the Airport Extreme. Also, I am wondering if this Airport Extreme is too old for what is currently available (and if it is secure enough). I would need to get help from Applecare. I tried once, when I first started having trouble with it, and it was way beyond my ability. I think I made things worse and I hope I did not do any hardware damage. I tried to set it up, after having it disconnected for about 2 years, and I did not call applecare.
    So I am wondering if I can have the MiFi2200 installed by VZAccessManager (but turned off when I use the Airport Extreme) and the 3 year-old Airport Extreme 802.11n Wi-Fi Base Station set-up at the same time. Also, is this model still OK to use (I really have no idea how long something like this Airport Extreme is good to use), and if I can use it, are there online instructions to set it up or would it be best to get Applecare's help. I would also like to know how I could find out if there have been any firmware updates or other updates for this Airport Extreme since it was last used (about 2 years ago)
    thanks in advance and I apologize if my terminology is not correct or too amateurish.

    OK, I am not following you exactly and I guess it is important to know what the existing set-up is like. Maybe you will understand my amateurish language. Before I moved in to this condo, the manager of the complex asked me if I need to use the ethernet ports in the rooms or will I be setting up a wireless connection. I said, for now I will be using the ethernet ports in the rooms of the condo. She said Ok, I will be up to your condo to put in a modem. (She could have said router or modem, I am not sure if there is a difference, but I do know the Airport Extreme is considered a router.) She opened this box that is on the wall while she said this is where the "T1" line comes into your condo, and T1 (I think I have the right term she used) is the fastest way to get around the internet. In the box in the wall is an electrical outlet (which the tiny blue modem (I will call this a modem because I am not sure what it is) is plugged into. In the back of the tiny blue modem are 5 ethernet ports and that is all, except for the power cord which connects to the side of the tiny blue modem. In the box, already screwed into place is a CAT5 ethernet strip, for lack of a better term that has 12 ethernet ports but only 4 are actually marked. I think the four that are marked are the ones that can be used, if I needed this many, but I am only using 3 and the ethernet cable goes from one of the ethernet ports on this CAT5 strip which is connected to the T1 line, and one of the 3 ethernet cables goes from the back of the tiny blue modem to one of the ethernet ports on this CAT5 strip (one that is marked as previously described) So I can hook up to the internet by using one of the 3 ethernet plugs in the various rooms of the condo or I can use the MiFi2200 from Verizon for a wireless connection. I have already told you why I prefer not to use the Verizon MiFi2200 and why I would like to set-up my Airport Extreme.
    As far as wanting to use the existing ethernet ports in the 3 rooms, I do not care about that unless the Airport Extreme does not work. The manager who initially hooked up the tiny blue modem said if I want a wireless connection I do not need the tiny blue modem. If I do want to use the ethernet ports in the rooms via an ethernet cable, I need the tiny blue modem. If this is tru or if I can have one and not the other, I really did not get a sense I could or could not have both a wireless and ethernet connections at the same time.
    Why would I want to plug the 3 or 4 ethernet cables that go from the tiny blue modem to the ethernet strip? The ethernet strip has about 10 ethernet ports, 3 of which are marked and I assume only those 3 can be used since there are only 3 actual ethernet ports in the walls in various room for connection.
    I know this is a different set-up but when I used the Airport Extreme before, I had a cable come in to my house from Comcast which was hooked up to a modem. One ethernet cable went from the modem to the back of the Airport Extreme which after Applecare helped me set up the Airport Extreme the whole house was wireless.
    In this condo, which is smaller than the house I had, why do I need all 3 ethernet cables to go from the CAT5 strip to the back of the Airport Extreme? Again, on the 12 port CAT5 strip, only 3 are labeled with some code, and those 3 go out to the wall ethernet ports.
    Are you getting ready to give up on me?

  • PS 6.0 doesn't open after being installed correctly on Mac OS 10.7.5 (MBP mid-2009)

    Hi there,
    I just installed correctly my new PS 6.0 and it doesn't start. I cleaned all the preferences folders from the previous PS 4.0, but still doesn't start…any idea?
    Thank you.

    I was able to resolve the problem by installing Flash Player 11.7.700.169 from the direct download installer:
    http://fpdownload.macromedia.com/get/flashplayer/pdc/11.7.700.169/install_flash_player_osx .dmg

Maybe you are looking for