Hanging network connection during file transfer

Hi,
Often, when I try to copy large files (1+ GB) through the network from my PowerMac G5 to my Mac Mini (PPC) the file transfer hangs after a short time.
The network is wired. G5 and network hub are Gigabit, the Mac Mini is Megabit.
When hanging I have to force quit the Finder and reboot the G5. I don't have to reboot the Mac Mini.
Any ideas why these transfers keep hanging?
Thanks!
Maarten

It depends how quick the laptop can write the data to disk/storage too.

Similar Messages

Zen goes blank during file transfer

i own a Zen 32GB flash player, and recently it has been going blank and forcing me to reset when i try to transfer files using the mediasource organizer. it connects fine, is recognized, and i can ever browse it, but when i try to transfer files the player goes from a "docked" screen to a blank one, the organizer reports an error, and i have to reset the player. this occurs with different files, so the cause isn't a faulty file. i am running the most recent version of MSO, and the latest drivers and firmware. OS is XP?sp2.
recovery mode cleanup also didn't help, and since the transfer rate is very slow i rather avoid formatting if i can.
has anyone experienced the same problem? any help would be appreciated.

'Re: Zen goes blank during file transfer. I have also experienced this same problem. I am currently using Windows 7 RC with Windows Media Player 2, but it was previously happening when running Windows XP SP3 with WMP.
I have actually had my player replaced already since I had this same problem on my previous player. That started occurring after having had the player for around 4 months. On first occurring a reset and clean up from the recovery mode was enough to get it going again, at least for a week or so. It then started occurring more frequently and I was forced to format the device. Again this seemed to fix the problem initially, but after just a few days it got to the point where even that wouldn't get it working again, at which point I sent it back and received a new device.
I've now had my replacement device for only a few weeks and it's started to happen again. I haven't yet resorted to a format, but a cleanup isn't working.
From my observation it seems to be in some way related to general power issues with the device. When the problem occurs the screen goes off and the player isn't recognised by the PC, but the power light on the side of the device remains lit orange, so it hasn't actually turned off. I've also had ongoing problems, on both devices, where I often can't turn the player back on after either I've turned it off or it's gone through the auto power down after leaving it on pause. In that case I also have to reset the device via the side button, and then wait a few minutes for the library to rebuild.
I too would appreciate hearing from anyone who might be able to provide some help with this problem, because my initial workarounds as described only work for a short period of time and I would prefer not to have to send it back a second time.

TC hangs during files transfer

Hello,
Brand new Time Capsule 2 TB. Everything works until I transfered files from my iMac to the TC. The TC hangs (during the file transfer) and needs to be reboot - not very easy, I tried maybe 20 times and then it worked - then it needs to be reconfigured.
I tried once again, transfering files (other files) from the Mac and the TC hangs again.
Strange, because I used my first TC (died last week, 18 months after I bought it) in the same way and I did transfer (in many months) lots of TB (maybe 5 to 10 GB a day) to the internal disk of the TC and to 3 externals drives (connected to the TC).
Is anyone suffering the same probleme?
Thanks for your time and best regards from sunny Switzerland
Message was edited by: Michel Schweizer

I have exactly the same problem on both my MBA & iMac yet my Mac Mini works like a dream
Just purchased the 2TB TC & 27inch iMac
Have ensured all are using the new Airport Utility version that came with the TC
MBA running 10.6.1 hangs between 1.6 & 2.2 MB of transfer.
iMac running 10.6.2 hangs after 1.6 MB transfer.
Mac Mini running 10.6 completes albeit slower than I would like however only using g rather than n
Both MBA & iMac using n - after they hang I get a server connections interrupted error which you can choose ignore or disconnect all
Internet / Browsing works perfectly even when the file has hung and I have chosen disconnect all
A quick refresh of the Airport off and on brings back the TC to be able to expand the file structure again and I can then try again.
Called Apple support today - they put me on hold twice for up to 5 mins each time as need to check with advanced support, mobile dropped out and they didn't ring back like they promised - will try again tomorrow.
If I find a solution be sure to let you know.
Biggest concern from reading all these forums is once I get a stable file transfer I will have to deal with terribly slow speeds over wifi.
Not to mention the incredibly slow speeds when a usb flash is plugged directly in the back of the TC

MacBook Pro Retina - Fan/Heat During File Transfer

Hey guys,
I just had my MacBook Pro Retina in for repair because of an 4HDD/11/400000000: Sata (0,0) error and they replaced the SSD. I have a 2.7/16/768 configuration. One of the main issues I noticed was periodically slow file transfers, load times and boots hanging etc. and a secondary reason was a high-pitched buzzing with heavy disk usage.
My question now is... when I'm doing something as simple as a large file transfer, or installing some apps etc. the MacBook really heats up and the fans really start spinning sometimes. I've never known SSD access to heat up a computer so much. Is this normal behaviour that everyone else is experiencing with their systems? To clarify: this happens when not doing anything else with the machine other than copying files around, also when copying files to/from my external drive which is connected through FireWire on the back of my 27" Thunderbolt display which is then of course connected to the MacBook via the Thunderbolt port.
Expected behaviour? Seems odd to me, but this is my first MacBook so don't know if that's the 'norm' or not.

I've managed to get the fan speed down to a reasonable, less audible level by using that old VRAM terminal command to enable me to keep the internal display disabled whilst the lid is open. I've had to shift quite a lot round on my desk to make this happen, but I guess it was the only way. It now runs 3 screens under similar loads at approximately 3500prm.
Taking your advice into consideration, I raised the rear feet and this enabled further decrease in fan speed. I guess one of those laptop stands will augment this effect, and I will look into them.
Anyway, thank you for your help!
Thanks,
Richard

Start network connection during boot [KDE4]

I want to able to connect to a network (with key) during boot.
Right now, when my arch is booting, it is trying to connect to a dhcpcd during boot, but fails (after several seconds). Then knetworkmanager and even wicd doesn't seem to work correctly. Knetworkmanager (from KDEmod) seems like doesn't work at all.
What can I do to make it connect during boot? (I usually connect only to one network).

I got it working.. however, I am wondering if I have everything right in my rc.config file, in DAEMONS section (maybe I have there something extra, which I can turn off).
#Static IP example
#eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
#eth0="dhcp"
#INTERFACES=(eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
NETWORKS=(wireless-wep)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng network netfs net-profiles hal !networkmanager crond alsa kdm)
Which one do I need? network, netfs? net-profiles?
Last edited by kdar (2009-12-16 02:17:01)

Creative Cloud losing network connection/deleting files

My team has been using Creative Cloud since June 2014. We work off of macs running OS Mavericks and use an internal server. For months now we have experienced errors mostly in InDesign where we lose our network connection, InDesign crashes, and our files either delete or revert back to the original version despite multiple saves. We have had network and server specialists in and have ruled out any internal connection issues. Could this be a Creative Cloud issue and are there any recommended fixes?

Quote from: NovJoe on 02-March-09, 23:10:05
Force your NIC to run at 100Mbps full duplex and see how it goes.
Check your router / switch ports as well as cables.
I will try 100 Mbps if it happens again. So far, it hasn't occurred after installing the driver supplied by MSI's Web site and not RealTek's Web site. The room temperatures even got warmer like 83F degrees.
As for router and switch, what am I checking for? Other computers didn't have any problems. As for cat5 cables, I already tried another one like I said in my original post.

Handling Network failure during data transfer from ECC to PI

Hi,
We have created a custom program in ECC to push invoice header information to PI using the proxy call.
We're able to successfully now push these data to PI without any issues.
However, there is a comment from client like if there is an unexpected error such as system or network failure during transferring data from ECC to PI, then how is it being handled from ECC side?
I'm left with no answers. I know the messages will be stucked in SMQ2 or SMQ1 but we need to find out how can resend those data to PI in case of such failures. Documents in ECC are either posted or parked or payment totally based on real time process and based on each ECC event such as parked or posted or reveresed, we are sending one message to PI respectively. But how can we resend these invoices incase of an unexpected error?
If we go with an ad hoc process, how do we implement this process for each document which is being created or rejected.
Thanks,
Shamim

Hi,
The queue will automatically restart if the problem was connection issue. In case of system failure you need to check and start them manually.
check http://help.sap.com/saphelp_nw04/helpdata/en/f3/df5f3cb0decb09e10000000a114084/content.htm
To check for any problems you can use CCMS monitoring.
check http://help.sap.com/saphelp_470/helpdata/en/52/12f73b7803b009e10000000a114084/content.htm
Hope this will help you.
Regards
Vinit

8900 to imac bluetooth connection for file transfer

Hello, I have a brand new curve 8900 javelin and a new IMAC. Both devices can see each other and I can manage to get a green connection light however it only lasts a few seconds and then disconnects. Can someone please tell me how to overcome this problem?
thank you

That's really weird, the different ways that the providers cripple the same phone. I do not need any plug-in for BT iSync but I can't do file transfer with BT or with USB (I do have a microSD card installed). Unfortunately, I have no use for iSync. I can also use the phone to provide Internet access for my Mac but the Mac is a desktop and a hardwired connection makes more sense.
The USB connection is really frustrating. Profiler knows that the phone is present and the phone knows that the Mac is present (the battery does charge) but otherwise it's as if it's not even connected.
I am able to put the card into a card reader and transfer files that way. I don't mind all that much but it's not easy getting the card out of the phone.
By the way, there are several RAZR versions. Is your "V3XX" the same phone as my "V3m?"

Error due to network connections during a calculation in partition

hi all,
I am excuting a calculation in one of the parttion and i am faced with an error which came up in the log file and it stopped the calculation and proceded to the next calculation.
the logfile where i encountered the errror is mentioned below the recovery script didnt really excecute and moved to the next script can some one help me in this??
MAXL> execute calculation PGAPY2.PGA.Recovery;
OK/INFO - 1012675 - Commit Blocks Interval for the calculation is [60000].
OK/INFO - 1012670 - Aggregating [ PGA Subcomponent(All members) PGA Rate Codes(All members)] with fixed members [Measures(Bill Count, Base Charge Count, Billed Volume excl. WNA (MCF), Base Cost of Gas Volume (MCF), Total PGA Charge, Base Rate Gas Recovery); Scenario(PY2 Actu.
OK/INFO - 1012678 - Calculating in parallel with [2] threads.
OK/INFO - 1012679 - Calculation task schedule [2425,1212,13,1].
OK/INFO - 1012680 - Parallelizing using [1] task dimensions. .
OK/INFO - 1012568 - Commit Blocks Interval was adjusted to be [100000] blocks.
OK/INFO - 1012681 - Empty tasks [713,1212,13,1].
OK/INFO - 1012675 - Commit Blocks Interval for the calculation is [60000].
OK/INFO - 1012668 - Calculating [ Measures(Billed Volume excl. WNA (MCF),Base Cost of Gas Volume (MCF))] with fixed members [Scenario(PY2 Actual); PGA Subcomponent(PGA Subcomponent)].
OK/INFO - 1012678 - Calculating in parallel with [2] threads.
OK/INFO - 1012679 - Calculation task schedule [2425,1212,13,1].
OK/INFO - 1012680 - Parallelizing using [1] task dimensions. .
OK/INFO - 1012568 - Commit Blocks Interval was adjusted to be [100000] blocks.
OK/INFO - 1012681 - Empty tasks [713,1212,13,1].
OK/INFO - 1012675 - Commit Blocks Interval for the calculation is [60000].
OK/INFO - 1012670 - Aggregating [ PGA Rate Codes(All members)] with fixed members [Scenario(PY2 Actual); PGA Subcomponent(PGA Subcomponent)].
OK/INFO - 1012678 - Calculating in parallel with [2] threads.
OK/INFO - 1012679 - Calculation task schedule [2425,1212,13,1].
OK/INFO - 1012680 - Parallelizing using [1] task dimensions. .
OK/INFO - 1012568 - Commit Blocks Interval was adjusted to be [89164] blocks.
OK/INFO - 1012681 - Empty tasks [713,1212,13,1].
OK/INFO - 1012675 - Commit Blocks Interval for the calculation is [60000].
OK/INFO - 1012668 - Calculating [ Measures(Billed Volume excl. WNA (MCF))] with fixed members [Scenario(PY2 Actual); PGA Rate Codes(PGA Rate Codes); Primary Rate Codes(00WU (40), 01MC (60), 01MI (60), 01MP (60), 01MR (60), 02MB (60), 03LR (25), 03TP (20), 03TR (20), 05NC (60.
OK/INFO - 1012678 - Calculating in parallel with [2] threads.
OK/INFO - 1012679 - Calculation task schedule [2425,1212,13,1].
OK/INFO - 1012680 - Parallelizing using [1] task dimensions. .
OK/INFO - 1012568 - Commit Blocks Interval was adjusted to be [100000] blocks.
OK/INFO - 1012681 - Empty tasks [713,1212,13,1].
OK/INFO - 1012675 - Commit Blocks Interval for the calculation is [60000].
OK/INFO - 1012670 - Aggregating [ Charge Month(All members) Customer Class(All members) Company(All members) Primary Rate Codes(All members) Geography(All members)] with fixed members [Measures(Bill Count, Base Charge Count, Billed Volume excl. WNA (MCF), Base Cost of Gas Vo.
OK/INFO - 1012678 - Calculating in parallel with [2] threads.
OK/INFO - 1012679 - Calculation task schedule [2425,1212,13,1].
OK/INFO - 1012680 - Parallelizing using [1] task dimensions. .
OK/INFO - 1012568 - Commit Blocks Interval was adjusted to be [63715] blocks.
ERROR - 1042017 - Network error: The client or server timed out waiting to receive data using TCP/IP. Check network connections. Increase the NetRetryCount and/or NetDelay values in the ESSBASE.CFG file. Update this file on both client and server. Restart the client and.
ERROR - 1006059 - Invalid block header: Illegal block type -- Please use the IBH Locate/Fix utilities to find/fix the IBH problem.

Agreed.
The network error is the client saying it gave up waiting for the server's response, or the server waiting for a pending client request. Typically, this is what happens when the application does a core dump (to use the old-school term).
Causes are numerous, but results are often data corruption (not always). Ensure that the app isn't in a hung state on the server (for windows, find it's thread and kill it if necessary, for unix, use the Kill -9 on it's PID). Once it's down, the database may recover fully, or may require fixing -- but if it's hosed it's often easier to restore from backup and move on.
Avoiding the issue in the future: the message to increase netretry/netdelay is misleading. If you get the timeouts on the network often, this is indeed the answer, but if you got the timeout because of a locked database, it's just a transient symptom that is unrelated.
What caused the lock-up? Intermittent network issues from an ill-timed backup of the server in the next rack, or a power outage in a router, doesn't really matter -- unless it becomes a reaccurring issue -- then it's time to find the network manager and pound some common sense into them (just kidding, I'm sure they will be pro-actively addressing issues like this... well, maybe...). Just let them know that you are having network performance issues if it happens again.
Meanwhile, validating the database is important to ensure the corruption has been cleaned up. You can do it from EAS or a MAXL statement, but do it before trying to repair it with any tools or recovering from a backup.

Itunes hanging network connectivity tests

Hi,
I have that old issue with iTunes hanging when I import CD's and the information is retrieved from Gracenotes. It also happens when doing a Network Connectivity Test from the diagnostics tab.
I do not have the jukebox software running as per the old 2011 conversation. Is there anything else I can look at as it is extremely frustrating to have to type things in manually!
Let me know please.
Thanks
C

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

Leopard decides to go to sleep during file transfer ***!

For some reason Leopard doesn't think that a file transfer is something that should be obeyed before it goes to sleep. I had a 7 hour network file transfer going on and leopard just went to sleep. Makes me want to break something.

Go to System Preferences > Energy Saver and select the Sleep tab. Drag the "Put the computer to sleep when it is inactive for:" to "Never".
Also ensure that the "Put the hard disk to sleep when possible" is unchecked.

Security During File transfer

hi,
i have done a file transfer program in Java which transfers a file from one PC to another.
i want tht my file (any text document ) should get transfered in secured manner. Like there should be cryptography and authentication both involved.
how should i go about it ?

My First preference would be to use SecuredSocket using Certificate.
If you can not use Secured Socket, You can use a private-key and public key to encrypt/decrypt the data.
I am assuming that you are sending file(s) from a local server to a remote server.
You shoud create Key Pair Generator to generate public/private key and store them in a secured files in your remote server.
Copy the public key to the local server using a secured way. (copy it using a ssh/scp).
Then, you can encrypt your file content using the public key and send it to the remote server. The remote server should be able to decrypt using the private key and Only the remote server w/ private key will be able to decrypt and get the original content.
Again, this is just one way to do it. If this needs to be a production code, I would suggest that you get a Certificate from a Certificate Authority such as VeriSign.
If you need some help, drop me an email ([email protected])

DiskWarrior crashes during file transfer/backup..

Guys, im able to get thru the Original and Preview pane of DW...there was a pop out that i need to backup my files as fast as i can because my original directory is damaged..so i backup/transfer all my files in Preview to my external hd...and after i copy 10GB files out of my 330GB it shows some errors the progress window dissapear out of nowhere..wth..i dont know what to do next and i tried thrice and it crashes again and again. pleaseae
Need your inputs..Thanks!!

Ok i finally found out that its advisable to copy every folder one a time rather than copying all then paste to your external hd...now ive done all the file transfer i still can see the REPLACE button is still greyed out..is there any chance that i can continue the rebuild/replace of my directory then install ML? or ny hd needs a replacement?

Setup Assistant fails during file transfer and loops back to the beginnig

I have a PPC G5 running 10.4.11 and just bought an Intel-based MacBook Pro. (I haven’t gotten it to fully start up yet, so I’m not sure about the OS.)
I've tried to use the Setup Assistant to migrate my files and applications from my desktop to the laptop, but when I get to the Transfer Files option, the Users, Applications Folder, and Files and Folders options never finish calculating. Everytime I hit Transfer, a black-and-white wheel appears for less than a second then disappears, and Setup Assistant loops back to the beginning, where I get the multilingual welcome messages and bad music. Or, if I do nothing and wait for the Transfer Files step to calculate, Setup Assistant still just loops back to the beginning.
I’ve tried the options for transferring from another Mac and from another volume. I’ve tried copying from the G5 in Target Disk Mode and tried copying from a cloned firewire hard drive. I’ve tried using the firewire 400 and 800 ports, different cables. I’ve run DiskWarrior on the G5 and the cloned disc to make sure no disc errors hung up the process. I tried booting into Safe Mode and following that protocol, though it seemed to address a different issue than the one I’m experiencing.
Any ideas about what I can do? I’d rather do this in Setup Assistant than Migration Assistant, and I really don’t relish the idea of reinstalling all the software I have on the G5 onto the MacBook Pro. (Logic, for example, takes forever to install.)
Let me know!

Even if it's a demo, it's unlikely it's got 10.5 on it. Maybe 10.6. I've used the 10.6 SA from Leopard, which ran perfectly with no problems. As for MA, here's one way to go about it, if you can't finish with SA. (Thanks to MonkeyBoy at XYMer's)
If you choose to use the migration assistant after installing SL to migrate settings over from Tiger, it'll copy over all your data intact from Tiger, as well as use the same account names & passwords.
What I typically do is choose a dummy name during the installation, then use MA to import the "real" accounts from the old install. After I'm satisfied MA moved over the accounts properly (I've logged into them and used them for a few hours/days and generally feel satisfied with the lack of crashes and similarly "odd" events) then I delete the dummy account.

No Progress Bar during file transfer

after installing yosemite recently, when i move a file to and from an external drive, i do not get the transfer bar that shows the progress of the move. any help fixing this? I have tried deleting the "com.apple.finder.plist" from library (& restarted) and repairing permissions. when i go to a different (clean) user account, i can get the progress bar when i move files.

Hardware Information: ℹ️
iMac (27-inch, Late 2012) (Verified)
iMac - model: iMac13,2
1 3.2 GHz Intel Core i5 CPU: 4-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
BANK 0/DIMM1
empty empty empty empty
BANK 1/DIMM1
empty empty empty empty
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce GTX 675MX - VRAM: 1024 MB
iMac 2560 x 1440
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 4 days 0:19:54
Disk Information: ℹ️
APPLE HDD ST1000DM003 disk0 : (1 TB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 999.35 GB (139.44 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Western Digital My Passport 071A 1 TB
western digital 1TB (disk2s1) /Volumes/western digital 1TB : 1.00 TB (197.96 GB free)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Configuration files: ℹ️
/etc/hosts - Count: 30
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Toast 11 Titanium/Spin Doctor.app
[not loaded] com.hzsystems.terminus.driver (4) [Support]
/Applications/Toast 11 Titanium/Toast Titanium.app
[not loaded] com.roxio.TDIXController (2.0) [Support]
/Library/Application Support/Hotspot Shield
[not loaded] com.anchorfree.tun (1.1.1 - SDK 10.8) [Support]
/System/Library/Extensions
[loaded] com.Cycling74.driver.Soundflower (1.6.6 - SDK 10.6) [Support]
[not loaded] com.Logitech.Control Center.HID Driver (3.4.0 - SDK 10.0) [Support]
[not loaded] com.Logitech.Unifying.HID Driver (1.2.0 - SDK 10.0) [Support]
[not loaded] com.aliph.driver.jstub (1.1.2 - SDK 10.7) [Support]
[not loaded] com.dvdfab.kext.fabio (1) [Support]
[not loaded] com.elgato.driver.DontMatchAfaTech (1.1) [Support]
[not loaded] com.elgato.driver.DontMatchCinergy450 (1.1) [Support]
[not loaded] com.elgato.driver.DontMatchCinergyXS (1.1) [Support]
[not loaded] com.elgato.driver.DontMatchEmpia (1.1) [Support]
[not loaded] com.elgato.driver.DontMatchVoyager (1.1) [Support]
[loaded] com.logmein.driver.LogMeInSoundDriver (4.1.46f67) [Support]
[not loaded] com.makemkv.kext.daspi (1) [Support]
[not loaded] com.maudio.usb.fasttrackultra.driver (2.2.1 - SDK 10.6) [Support]
[not loaded] com.paceap.kext.pacesupport.master (5.9 - SDK 10.6) [Support]
[loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.68) [Support]
[not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.68) [Support]
[not loaded] com.roxio.BluRaySupport (1.1.6) [Support]
[not loaded] com.vara.driver.VaraAudio (1.0.2) [Support]
[not loaded] jp.co.roland.RDUSB00C5Dev (1.0.0 - SDK 10.6) [Support]
[loaded] net.telestream.driver.TelestreamAudio (1.1.0 - SDK 10.8) [Support]
[loaded] tc.tctechnologies.driver.OnyxFireWire (3.5.6 11675) [Support]
/System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns
[not loaded] com.paceap.kext.pacesupport.leopard (5.9 - SDK 10.4) [Support]
[not loaded] com.paceap.kext.pacesupport.panther (5.9 - SDK 10.-1) [Support]
[loaded] com.paceap.kext.pacesupport.snowleopard (5.9 - SDK 10.6) [Support]
[not loaded] com.paceap.kext.pacesupport.tiger (5.9 - SDK 10.4) [Support]
Startup Items: ℹ️
Jaksta: Path: /Library/StartupItems/Jaksta
RDUSB00C5Startup: Path: /Library/StartupItems/RDUSB00C5Startup
Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[failed] com.adobe.CS5ServiceManager.plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
[running] com.Logitech.Control Center.Daemon.plist [Support]
[running] com.logmein.logmeingui.plist [Support]
[running] com.logmein.logmeinguiagent.plist [Support]
[not loaded] com.logmein.logmeinguiagentatlogin.plist [Support]
[running] com.m-audio.fasttrackultra.helper.plist [Support]
[loaded] com.oracle.java.Java-Updater.plist [Support]
[running] com.rim.BBAlbumArtCacher.plist [Support]
[running] com.rim.BBLaunchAgent.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[invalid?] com.adobe.SwitchBoard.plist [Support]
[loaded] com.anchorfree.ajaxserver.plist [Support]
[loaded] com.google.keystone.daemon.plist [Support]
[not loaded] com.gopro.stereomodestatus.plist [Support]
[running] com.logmein.logmeinserver.plist [Support]
[invalid?] com.logmein.raupdate.plist [Support]
[loaded] com.oracle.java.Helper-Tool.plist [Support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Support]
[running] com.paceap.eden.licensed.plist [Support]
[running] com.rim.BBDaemon.plist [Support]
[loaded] com.rogueamoeba.hermes.plist [Support]
[loaded] PACESupport.plist [Support]
[loaded] tc.tctechnologies.OnyxFireWire.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[invalid?] com.digitalrebellion.SoftwareUpdateAutoCheck.plist [Support]
[invalid?] com.divx.agent.postinstall.plist [Support]
[loaded] com.facebook.videochat.[redacted].plist [Support]
[loaded] com.Livestation.plist [Support]
[invalid?] com.nds.pcshow.plist [Support]
[invalid?] com.nds.pcshow.uninstall.plist [Support]
User Login Items: ℹ️
BoxSyncHelper ApplicationHidden (/Library/PreferencePanes/Box Sync.prefPane/Contents/MacOS/BoxSyncHelper.app)
Dropbox ApplicationHidden (/Applications/Dropbox.app)
Air Video Server ApplicationHidden (/Applications/Air Video Server.app)
Air Video Server HD ApplicationHidden (/Applications/Air Video Server HD.app)
Google Drive ApplicationHidden (/Applications/Google Drive.app)
BitTorrent Sync ApplicationHidden (/Applications/BitTorrent Sync.app)
Internet Plug-ins: ℹ️
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 3.0.0.126   - SDK 10.8 [Support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
LogMeIn: Version: 1.0.961 - SDK 10.7 [Support]
Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
iPhotoPhotocast: Version: 7.0
LogMeInSafari32: Version: 1.0.961 - SDK 10.7 [Support]
QuickTime Plugin: Version: 7.7.3
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
JavaAppletPlugin: Version: Java 8 Update 25 Check version
User internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 7.1 [Support]
Safari Extensions: ℹ️
A Cleaner YouTube [Installed]
ScrollMaps [Installed]
Add To Amazon Wish List [Installed]
Facebook Cleaner-1 [Installed]
The New York Times [Installed]
Twitter for Safari [Installed]
Save to Pocket [Installed]
AdBlock [Installed]
Searchme [Installed] Adware! [Remove]
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
Box Sync [Support]
Flash Player [Support]
Flip4Mac WMV [Support]
GoPro [Support]
Java [Support]
M-Audio Fast Track Ultra [Support]
MediaLink [Support]
MusicManager [Support]
Perian [Support]
SP-555 [Support]
Time Machine: ℹ️
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 999.35 GB Disk used: 859.91 GB
Destinations:
Data [Network]
Total size: 2.00 TB
Total number of backups: 73
Oldest backup: 2014-02-16 09:10:07 +0000
Last backup: 2014-12-17 16:21:13 +0000
Size of backup disk: Too small
Backup size 2.00 TB < (Disk used 859.91 GB X 3)
Top Processes by CPU: ℹ️
      7% Safari
      7% WindowServer
      2% uTorrent
      1% launchservicesd
      1% launchd
Top Processes by Memory: ℹ️
481 MB iTunes
412 MB Safari
407 MB com.apple.WebKit.WebContent
404 MB com.apple.MediaLibraryService
223 MB softwareupdated
Virtual Memory Information: ℹ️
491 MB Free RAM
4.00 GB Active RAM
3.02 GB Inactive RAM
1.07 GB Wired RAM
14.11 GB Page-ins
59 MB Page-outs
Diagnostics Information: ℹ️
Nov 17, 2014, 07:19:10 PM Kernel_2014-11-17-191910_[redacted].panic [Details]

Hanging network connection during file transfer

Similar Messages

Maybe you are looking for