Hanging on Power Off
This has happened to me about 3 times. In the evening I turn my phone off and plug it in. I press and hold power off button and release after the 3 second count. The Blackberry word comes up and the phone sits there. sometimes it will disappear but you can there is still a faint backlight visible. I power back on again and then try again and it usually works second time. Anyone else have this or am I the only lucky one or doing something wrong? Its not a huge deal nor any sort of deal breaker for me, would like to figure it out though.
I think you might be on to something. I turned wifi off before powering down last night and it shut off without a hitch. I'll try it again a few times and report back.
Similar Messages
-
System Hangs - requires power off, then panic
I have a mac mini that runs all the time at a weekend house. I can access it remotely using Apple Remote Desktop. Recently, the Mini has started to hang. It runs (all lights on) but screen goes dark and machine cannot be ping'ed on network. I tried unplugging all USB and Firewire devices but to no avail. I cannot tell what cause the hang/crash. There is no Panic in the Console Log at time of hang. There is a panic that gets listed at start-up though. This has happened three time now so I am a bit concerned. The last time it happened Oct 30 and machine was reset Nov 6. From the System Log:
Oct 30 16:17:18 HamptonsMacintosh-4 Mail[281]: Mail: SafetyNet not needed - wrongState:0
Oct 30 16:22:21 HamptonsMacintosh-4 Mail[281]: Mail: SafetyNet not needed - wrongState:0
Nov 6 11:48:40 localhost com.apple.launchd[1]: * launchd[1] has started up. *
Nov 6 11:48:48 localhost DirectoryService[11]: Improper shutdown detected
Nov 6 11:49:02 localhost mDNSResponder[17]: mDNSResponder mDNSResponder-212.1 (Jul 24 2009 22:34:12) starting
From the panic log (despite date, I believe panic occurred Oct 30):
Interval Since Last Panic Report: 691148 sec
Panics Since Last Report: 1
Anonymous UUID: 79D32392-DC2F-49F2-A9DD-5B9852CAA32B
Fri Nov 6 11:49:07 2009
panic(cpu 0 caller 0x226297): "thread_invoke: preemption_level -1, possible cause: unlocking an unlocked mutex or spinlock"@/SourceCache/xnu/xnu-1456.1.25/osfmk/kern/sched_prim.c:1471
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x2e96be28 : 0x21acfa (0x5ce650 0x2e96be5c 0x223156 0x0)
0x2e96be78 : 0x226297 (0x5864e8 0xffffffff 0x586480 0x225b6c)
0x2e96bef8 : 0x22699d (0x6a1c01c 0x0 0x2e96bf28 0x1)
0x2e96bf68 : 0x218953 (0x29c655 0x0 0x1 0x4ed682)
0x2e96bfa8 : 0x2a5a07 (0xffffffff 0x1 0x2e96bfc8 0x6957dc4)
0x2e96bfc8 : 0x29c866 (0x0 0x0 0x10 0x6957dc4)
BSD process name corresponding to current thread: CIJScannerRegist
Mac OS version:
10B504
Kernel version:
Darwin Kernel Version 10.0.0: Fri Jul 31 22:47:34 PDT 2009; root:xnu-1456.1.25~1/RELEASE_I386
System model name: Macmini1,1 (Mac-F4208EC8)
System uptime in nanoseconds: 708622302930346
unloaded kexts:
com.apple.driver.AppleFileSystemDriver 2.0 (addr 0x34c5f000, size 0x12288) - last unloaded 273627445524
loaded kexts:
com.cisco.nke.ipsec 2.0.1
com.parallels.kext.prl_vnic 4.0 3846.436204
com.parallels.kext.prl_netbridge 4.0 3846.436204
com.parallels.kext.prlusbconnect 4.0 3846.436204
com.parallels.kext.prlhidhook 4.0 3846.436204
com.parallels.kext.prl_hypervisor 4.0 3846.436204
com.apple.filesystems.smbfs 1.6.0 - last loaded 137610259707
com.apple.filesystems.afpfs 9.5
com.apple.nke.asp_tcp 5.0
com.apple.filesystems.autofs 2.1.0
com.apple.DontSteal_Mac_OSX 7.0.0
com.apple.driver.AppleUpstreamUserClient 3.0.5
com.apple.driver.AppleIntelGMA950 6.0.2
com.apple.driver.AppleHDA 1.7.4a1
com.apple.driver.AudioIPCDriver 1.1.0
com.apple.driver.AppleLPC 1.4.6
com.apple.driver.AppleIntelIntegratedFramebuffer 6.0.2
com.apple.iokit.AppleYukon2 3.1.14b1
com.apple.driver.AirPort.Atheros 411.19.4
com.apple.driver.AppleIRController 161
com.apple.driver.ACPISMCPlatformPlugin 3.4.0a20
com.apple.driver.AppleIntelMeromProfile 19
com.apple.driver.Oxford_Semi 2.5.0
com.apple.iokit.SCSITaskUserClient 2.5.1
com.apple.driver.AppleUSBHub 3.7.8
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.driver.AppleUSBEHCI 3.7.5
com.apple.driver.AppleEFINVRAM 1.3.0
com.apple.iokit.IOAHCIBlockStorage 1.5.0
com.apple.driver.AppleFWOHCI 4.3.4
com.apple.driver.AppleAHCIPort 2.0.0
com.apple.driver.AppleIntelPIIXATA 2.5.0
com.apple.driver.AppleUSBUHCI 3.7.5
com.apple.driver.AppleRTC 1.3
com.apple.driver.AppleHPET 1.4
com.apple.driver.AppleACPIButtons 1.3
com.apple.driver.AppleSMBIOS 1.4
com.apple.driver.AppleACPIEC 1.3
com.apple.driver.AppleAPIC 1.4
com.apple.security.sandbox 0
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.0.11
com.apple.driver.AppleIntelCPUPowerManagementClient 90.0.0
com.apple.driver.AppleIntelCPUPowerManagement 90.0.0
com.apple.driver.AppleHIDMouse 1.3.0f1
com.apple.driver.IOBluetoothHIDDriver 2.2.1f7
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.iokit.IOSurface 73.0
com.apple.iokit.IOBluetoothSerialManager 2.2.1f7
com.apple.iokit.IOSerialFamily 10.0.2
com.apple.driver.DspFuncLib 1.7.4a1
com.apple.iokit.IOAudioFamily 1.7.0fc16
com.apple.kext.OSvKernDSPLib 1.3
com.apple.iokit.IONDRVSupport 2.0
com.apple.iokit.IOGraphicsFamily 2.0
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.IO80211Family 300.20
com.apple.iokit.IONetworkingFamily 1.8
com.apple.iokit.IOUSBHIDDriver 3.7.5
com.apple.driver.AppleHDAController 1.7.4a1
com.apple.iokit.IOHDAFamily 1.7.4a1
com.apple.driver.IOPlatformPluginFamily 3.4.0a20
com.apple.driver.AppleSMC 3.0.1d2
com.apple.iokit.AppleProfileFamily 40
com.apple.driver.AppleUSBMergeNub 3.7.5
com.apple.driver.CSRUSBBluetoothHCIController 2.2.1f7
com.apple.driver.AppleUSBBluetoothHCIController 2.2.1f7
com.apple.iokit.IOBluetoothFamily 2.2.1f7
com.apple.driver.AppleUSBComposite 3.7.5
com.apple.iokit.IOSCSIReducedBlockCommandsDevice 2.5.1
com.apple.iokit.IOFireWireSerialBusProtocolTransport 2.0.0
com.apple.iokit.IOFireWireSBP2 4.0.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.5.1
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOUSBUserClient 3.7.5
com.apple.iokit.IOATAPIProtocolTransport 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 2.5.1
com.apple.iokit.IOFireWireFamily 4.1.7
com.apple.iokit.IOAHCIFamily 2.0.0
com.apple.iokit.IOATAFamily 2.5.0
com.apple.iokit.IOUSBFamily 3.7.8
com.apple.driver.AppleEFIRuntime 1.3.0
com.apple.iokit.IOHIDFamily 1.6.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.TMSafetyNet 6
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 281
com.apple.iokit.IOStorageFamily 1.6
com.apple.driver.AppleACPIPlatform 1.3
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0
System Profile:
Model: Macmini1,1, BootROM MM11.0055.B08, 2 processors, Intel Core 2 Duo, 2.16 GHz, 2 GB, SMC 1.3f4
Graphics: Intel GMA 950, GMA 950, Built-In, spdisplaysintegratedvram
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x86), Atheros 5424: 2.0.19.4
Bluetooth: Version 2.2.1f7, 2 service, 1 devices, 1 incoming serial ports
Network Service: Built-in Ethernet, Ethernet, en0
Network Service: Parallels Shared Networking Adapter, Ethernet, en4
Network Service: Parallels Host-Only Networking Adapter, Ethernet, en5
Serial ATA Device: ST9320421AS, 298.09 GB
Parallel ATA Device: MATSHITADVD-R UJ-846
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0608, 0xfd300000
USB Device: Hub, 0x2001, 0xf103, 0xfd100000
USB Device: USB RECEIVER, 0x046d (Logitech Inc.), 0xc50e, 0xfd110000
USB Device: SmartHome PowerLinc USB E, 0x10bf, 0x0004, 0xfd160000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8205, 0x7d100000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8240, 0x7d200000
USB Device: Back-UPS RS 1200 FW:8.g3 .D USB FW:g3, 0x051d (American Power Conversion), 0x0002, 0x5d200000
USB Device: USB Hub, 0x05e3 (Genesys Logic, Inc.), 0x0604, 0x5d100000
USB Device: hp LaserJet 3030, 0x03f0 (Hewlett Packard), 0x1817, 0x5d160000
FireWire Device: Newer Tech miniStack V2, Newer Technology, Up to 400 Mb/sec
FireWire Device: Newer Tech miniStack V2, Newer Technology, Up to 400 Mb/sec
any ideas what is going on?Just happened again last night (11/25). Machine stops responding and screen is dark. Happens while Mac Mini is unattended so I cannot say exactly what the cause it. I went through every log in the console and the last entry was:
2009-11-25 19:46:55:791|SyncServer|60712|c10f10|Server|Info| Goodnight, Gracie.
The last file saved on my harddrive (from Indigo events window) was :
2009-11-25 19:39:08 RCS The MasterBedroomTemperature is 58 degrees.
I came to machine after I could not remote into into, fond screen dark and all I could do was restart. Restart came with typical panic message, but it was dated 11/26 (after poweroff restart). I do not know why I keep freezing, but it has happened about 5 times over last 3 months.
Thu Nov 26 22:57:28 2009
panic(cpu 0 caller 0x226820): "thread_invoke: preemption_level -1, possible cause: unlocking an unlocked mutex or spinlock"@/SourceCache/xnu/xnu-1486.2.11/osfmk/kern/sched_prim.c:1471
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x2effb998 : 0x21b2bd (0x5cf868 0x2effb9cc 0x223719 0x0)
0x2effb9e8 : 0x226820 (0x5876cc 0xffffffff 0x587664 0x225ec4)
0x2effba68 : 0x226f27 (0x71957c4 0x0 0x0 0xffffffff)
0x2effbad8 : 0x226fb5 (0x0 0x0 0x0 0x71957a8)
0x2effbaf8 : 0x21191c (0x0 0x0 0xffffffff 0x0)
0x2effbb28 : 0x21dd51 (0x9a4b2b4 0x0 0xffffffff 0x0)
0x2effbb88 : 0x21de4c (0x2effbbc4 0x5c 0x2c 0x0)
0x2effbba8 : 0x23d0dd (0x2effbbc4 0x5c 0x2c 0x0)
0x2effbc38 : 0x21b5a9 (0x45a7460 0x72394d0 0x7585b90 0x1)
0x2effbee8 : 0x21b8db (0x71957a8 0x1 0x2effbfa0 0x2)
0x2effbf38 : 0x2a744f (0x1 0x2effbfa0 0x2 0x1)
0x2effbfc8 : 0x29d7ca (0x6a93dc4 0x1 0x10 0x6a93dc4)
BSD process name corresponding to current thread: CIJScannerRegist
Mac OS version:
10C540
Kernel version:
Darwin Kernel Version 10.2.0: Tue Nov 3 10:37:10 PST 2009; root:xnu-1486.2.11~1/RELEASE_I386
System model name: Macmini1,1 (Mac-F4208EC8)
System uptime in nanoseconds: 519779320850528
unloaded kexts:
com.apple.driver.AppleFileSystemDriver 2.0 (addr 0x2eeca000, size 0x12288) - last unloaded 278846161337
loaded kexts:
com.cisco.nke.ipsec 2.0.1
com.parallels.kext.prl_vnic 4.0 3846.436204
com.parallels.kext.prl_netbridge 4.0 3846.436204
com.parallels.kext.prlusbconnect 4.0 3846.436204
com.parallels.kext.prlhidhook 4.0 3846.436204
com.parallels.kext.prl_hypervisor 4.0 3846.436204
com.apple.filesystems.smbfs 1.6.0 - last loaded 210704943409
com.apple.filesystems.afpfs 9.6
com.apple.nke.asp_tcp 5.0
com.apple.filesystems.autofs 2.1.0
com.apple.DontSteal_Mac_OSX 7.0.0
com.apple.driver.AppleIntelGMA950 6.0.6
com.apple.driver.AudioIPCDriver 1.1.2
com.apple.driver.AppleHDA 1.7.9a4
com.apple.driver.AppleUpstreamUserClient 3.1.0
com.apple.driver.AppleIntelIntegratedFramebuffer 6.0.6
com.apple.iokit.AppleYukon2 3.1.14b1
com.apple.driver.AirPort.Atheros 412.19.4
com.apple.driver.AppleIntelMeromProfile 19
com.apple.driver.ACPISMCPlatformPlugin 4.0.1d0
com.apple.driver.AppleLPC 1.4.9
com.apple.driver.AppleIRController 251.1.4
com.apple.driver.Oxford_Semi 2.5.1
com.apple.iokit.SCSITaskUserClient 2.6.0
com.apple.iokit.IOAHCIBlockStorage 1.6.0
com.apple.driver.AppleUSBHub 3.8.4
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.driver.AppleAHCIPort 2.0.1
com.apple.driver.AppleIntelPIIXATA 2.5.0
com.apple.driver.AppleEFINVRAM 1.3.0
com.apple.driver.AppleUSBEHCI 3.7.5
com.apple.driver.AppleFWOHCI 4.4.0
com.apple.driver.AppleUSBUHCI 3.7.5
com.apple.driver.AppleRTC 1.3
com.apple.driver.AppleHPET 1.4
com.apple.driver.AppleACPIButtons 1.3
com.apple.driver.AppleSMBIOS 1.4
com.apple.driver.AppleACPIEC 1.3
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 96.0.0
com.apple.security.sandbox 0
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.11
com.apple.driver.AppleIntelCPUPowerManagement 96.0.0
com.apple.driver.IOBluetoothHIDDriver 2.2.4f3
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.iokit.IOSurface 73.0
com.apple.iokit.IOBluetoothSerialManager 2.2.4f3
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.driver.DspFuncLib 1.7.9a4
com.apple.iokit.IOAudioFamily 1.7.2fc1
com.apple.kext.OSvKernDSPLib 1.3
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.IO80211Family 310.6
com.apple.iokit.IONetworkingFamily 1.9
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.AppleHDAController 1.7.9a4
com.apple.iokit.IOHDAFamily 1.7.9a4
com.apple.driver.AppleSMC 3.0.1d2
com.apple.driver.IOPlatformPluginFamily 4.0.1d0
com.apple.iokit.IONDRVSupport 2.0
com.apple.iokit.IOGraphicsFamily 2.0
com.apple.driver.AppleUSBMergeNub 3.8.5
com.apple.driver.CSRUSBBluetoothHCIController 2.2.4f3
com.apple.driver.AppleUSBBluetoothHCIController 2.2.4f3
com.apple.iokit.IOBluetoothFamily 2.2.4f3
com.apple.iokit.IOUSBHIDDriver 3.8.4
com.apple.driver.AppleUSBComposite 3.7.5
com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.0
com.apple.iokit.IOSCSIReducedBlockCommandsDevice 2.6.0
com.apple.iokit.IOFireWireSerialBusProtocolTransport 2.0.0
com.apple.iokit.IOFireWireSBP2 4.0.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.0
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOATAPIProtocolTransport 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.0
com.apple.iokit.IOUSBUserClient 3.8.5
com.apple.iokit.IOAHCIFamily 2.0.2
com.apple.iokit.IOATAFamily 2.5.0
com.apple.iokit.IOFireWireFamily 4.1.7
com.apple.iokit.IOUSBFamily 3.8.5
com.apple.driver.AppleEFIRuntime 1.3.0
com.apple.iokit.IOHIDFamily 1.6.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.TMSafetyNet 6
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 281
com.apple.iokit.IOStorageFamily 1.6
com.apple.driver.AppleACPIPlatform 1.3
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0 -
My ipad hangs up after showing a message that says it "Cannot Access Find My Friends" and that I need to open the app and review my signin info to continue sharing. I can't go there because it is hung up. I also can't power off.
Perform a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430 -
Leopard hangs - have to power off - force quit doesn't work
On several occasions Leopard has hung - try to run activity monitor to kill problem app - I get the bouncing icon but nothing else. force quit does not work on it. Can't log off - can put to sleep, but resumes in same hung state. Once I hard power off and restart, a I get a series of beeps, not just one and a normal start - no error messages. Other programs also would not respond to force quit including parallels desktop.
Hi,
Have had same problem here. My iMac is only a few days old, and barely anything on it before the upgrade from tiger to leopard.
Tried lauching thunderbird tonight, and the app just sat on the dock bouncing for a while, but the application never actually seemed to launch.
Tried force quit, but didn't have any effect. Also could not log-off, or shut down, as it said the application wasn't responding. This does seem very windoze-like! -
[Solved] System does not power off, hangs at "System Halted"
Not sure if this is systemd or kernel related, and after the recent round of upgrades it happens on one of my computers and not the other.
I'm using systemd and do have systemd-sysvcompat installed, but no daemons are started with initscripts.
When I power off from the KDE desktop using the poweroff icon in the tray, it gets to the point where it says "System Halted" on the console screen
but the computer does not power off. If I power off using the physical power button on the computer, exactly the same thing happens.
However, if I power off using "sudo systemctl start poweroff.target" it works perfectly.
How can I get it to work properly again in KDE or if I hit the power button? Why does it work perfectly on one computer but not the other?
Last edited by Zamboniman (2012-11-10 03:41:24)Okay, this has now been solved. Thanks are due to bgc1954 and Trillby for pointing me in the right direction. Very much appreciated.
My search ability, usually very good, completely failed me on this one. However, a few hints was all I needed.
For the record:
To make the power button poweroff instead of halt: edit /etc/systemd/logind.conf and uncomment HandlePowerKey and make sure its value is set to poweroff.
To make kde poweroff properly, edit /usr/share/config/kdm/kdmrc and look for the [Shutdown] section. Ensure HaltCmd is uncommented and set to /sbin/poweroff.
As to why the behaviour was different on my other computer, for some reason the relevant kdmrc entry on that computer was commented out. Apparently that makes it work correctly. I don't know why they were different, as I don't recall changing either. -
Windows 7 hangs and switches off network access
We are running a Windows 7 Ultimate 32-bit operating system as our server.
About on 30 minute intervals the computer hangs and switches off network access.
If the computer is in this state and you try and access it from another computer nothing happens.
While in this state you can see the desktop indicating that it's not in sleep mode.
The problem is rectified by click the mouse on the computer.
It has not gone into a sleep mode as everything on the power options is set to never.
Please help?
Regards,
Andries Malherbe
Vizier SystemsAbout on 30 minute intervals the computer hangs and switches off network access.
If the computer is in this state and you try and access it from another computer nothing happens.
Could you plaese share more information about "switches off network access" with us? I don't quite understand this situation
Please also check the event viewer to collect related information about this issue when you re-use the Windows 7.
Meanwhile, Please update the driver for network adapter or reinstall for a test.
Regards
Yolanda
TechNet Community Support -
I am having difficulties with iPhoto slideshow. It crashes in the middle of the presentation and I have to power off and restart my computer to get it running again.
Wow. Okay...
I'll let the real veterans in this forum tackle your issues one after the other. But, I can tell you, all will be well.
My only comment would be re: your computer specs:
BJReis wrote:
. This may be due to somewhat older equipment:
GHz Intel Core Duo MacBook Pro with a 4GB memory computer with Ddr3 running OSX 10.8.4
To be completely honest, FCPX is a RAM hog. It just is. But, RAM is relatively cheap, and the pay-off is good.
4GB is right on the edge, IMHO. 16G is ideal.
I wish you luck, hang in there, and standby for more help. -
i got a ancient 865pe neo-2 ect..... i have been having issues with it not powering off, i got a new power supply (figured i killed the old with overloading it) i installed the new one and it will not power off like a ATX power supply should.
i can hold the button and it will turn off
i never changed the power settings, but something could be a-mis there. what settings do i need to have set
i believe windows tells it to power down cause i hear the hard drives spin down after the shutdown splash goes away (xp)
i looked at the FAQ
i cannot set s5 or g3 as modes. i have bios 9/29/04
9. Power Management
Q: What are S1/POS and S3/STR modes?
S1/POS = Power On Suspend, nothing turn off just that everything is running in extremely slow.
S3/STR = Suspend to RAM, PSU only powers 5V_STBY to the board for RAM refreshing, the rest all off.
Additionally,
S4 = Suspend to Disk. Win2k/XP calls it "Hibernation" mode. In this mode, the RAM and CPU state images are copied into the HDD. After S4 mode, you can safely remove the power cord.
S5 = Soft Off. PSU still supplies 5V_STBY.
G3 = mechanical off. No power at all to the board.
Q: Where to set the standby modes?
For S1 and S3, you can set the standby mode to either S1 or S3, not both, in the BIOS. Note that Windows cannot choose which standby mode to run. You have to set it in the BIOS.
For S4, you can only set it in Windows 2k/XP (and ME, but not 98).the 4 pin breakaway is just hanging there, the other 4 pin is plugged in near the cpu
no it stopped shutting off when i think i overloaded the 500w, the 750 does the same thing,
upon installing the 750 it does not shut off properly, which now leads to yet another bad board(the first one had a LGA socket that was eating cpus) or a bios issue
the 500w was not putting out the volts i needed so i figured it was dead
my voltages are better now though, before they were 11.2-12.0 and i think the +3 was 2.5ish, now they are +12.59 and +3.14 vcc is 5.04
bios stats it is 9/29/04
specs are as follows
MSI 865PE Neo-2P (or similar i cant think of the exact name)
p4 3.2e presshot 800fbs 1mb cache
2048mb ultra dual channel ddr 400 (pc 3200)
WD PATA 80gb hdd
WD SATA 160gb hdd
nVidia 7800 GS OC (bfg tech) AGP vid card
sony burners and flopppy drive
and the ultra x-2 750w power supply
2 case fans, a hdd fan, 2 on the psu , one on the cpu and one on the vid card,
damn cpu gets near 80*c but that normal for this cpu (considering im idleing at 50*c right now, with a case temp or 36*c) -
After I upgraded to ios6 , my iPad gmail was something wrong because it always hang and switch off the App automatically . It is very irritating . Please let me know how to solve this problem because I have to read my email everyday . Thanks .
Double tap Home button, delete Mail from multitask-bar.
Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears, ignore the Slide to Power Off that appears)
Note: You will not lose any data. -
I can't power off my c2d laptop
nicholas@11:54:30:~$ uname -a
Linux LNZJU 2.6.19-beyond #1 SMP PREEMPT Fri Dec 15 17:41:19 EST 2006 i686 Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz GenuineIntel GNU/Linux
I've tried the following commond, but it always hangs with the screen displaying "Power off"
shutdown -h now
halt -p
poweroff
BTW: I can reboot and laptop.Captain Spaulding wrote:I've seent his bug once before on a HP laptop running Mandriva 2007. The laptop will eventually power down, it just takes minutes, often 15 minutes and more. On the HP the problem was caused by acpid and apmd running at the same time. Maybe you want to check that.
I only has acpid, and when I googles, I when some freebsd have the same problem. -
Sky+ HD box unresponsive, slow and sometimes just freezes requiring a reboot/power off
Hi, I have a standard Sky+ HD box which must be a few years old now with the following specs: Model Number: R010.070.87.00PVersion Number: 9730B3Manufacturer: Samsung Recently the box has become really slow to respond to the remote control when either watching recordings or just live TV. Also, frequently not responding at all after a period of time which resorts in a power down using the power off button and unplugging the mains, leaving for 30 seconds then plugging back in. this issue seems to happen most whilst watching recordings although it has happened whilst watching live TV also. I appear to be running the latest software so these issues really all point to the recent code update. I have also performed several planner rebuilds with no affect/improvement at all. I've checked the batteries in the remote, which are fine and new. The box is in a well ventilated cupboard, stood on chocks to allow airflow all around the box. I rang Sky from work to report the issue and get help but the engineer could not help me unless I was in the same room as the box, so this is my next step to call them whilst at home. I wonder whether I can push this issue and get another box or a newer 2TB box gratis rather than having to pay the £150 fee. this could be the tipping point to force me over to a different option such as Freesat or Nowtv etc This is so annoying and is going to make TV viewing over the christmas period a real pain for all the family. Thanks for any help and advise, Cheers, Jason
I'm getting the same problems with a Sky HD+ 1TB Amstrad DRX 895 - On power-up from cold it's OK, but the longer it's left on, even in standby, the slower it responds. Eventually it just hangs, and the problem is getting worse. I found that turning off HDMI Control in the Settings improved matter a bit (why does it default 'on'?), but that just delays the inevitable. At first I suspected a software problem, such as a memory leak that built up until it crashed the box, but the fact that it won't run properly after a reboot - even after powering off - unless it's left to cool down, suggests it's a hardware fault. Some previous Sky box models have had power supply problems when the box reaches a certain age - the capacitors start failing, causing the same kind of problems. I had such a box, and got a replacement power supply kit which fixed it. I think it's likely the newer boxes have this problem too - they're built with the cheapest components that don't last well. You might find the SatCure site can help - they have lists of repairers around the country who can fix Sky boxes or sell you DIY repair kits, or refurbished Sky boxes for less than a new one. I'm going to check out my local repairer.
-
POWER OFF ISSUE K8 NEO4 PLATINUM (DON´T SHUTDOWN ALWAYS RESTART)
I have a strange behavior with my main board. It has worked well for almost three years. But now, I decided to change everything to a new case, and I decided to upgrade from XP to Windows Vista (no real upgrade, I format my hard disk and perform a clean install). And I have something very strange happened.
Every time I shut down the computer, performs the process smoothly, and when it goes off, the computer is restarted automatically. Do not stay off.
It's the same if keep pressing the power button for about two seconds. (in post for example) It seem to be shut down, the fans almost stopped immediately but the computer starts up again.
The only way to turn it off is to keep pressing the power button more than seven seconds. But I cannot turn off normally from the command “shut down” Windows.
I tried several solutions, without any success:
Try several power buttons on of different cases: Also, I have to manually shutdown the computer joining the pins of the ignition of the mainboard ( Not worry, I have been careful not to make any short circuit)
Test setup minimum, only memory, processor and video card. ( We also tried another video card and other memory).
Try different power supplies.
Disable all peripherals in the bios. (usb, parallel and com port, audio, lan, ATA, SATA, raid, IRD. IE1934, floppy, etc)
Change all possible power configurations of the bios:
IOAPIC Function (enable and disable)
MPS: (1.4 and 1.1).
ACPI Standby State (S1 and S3)
Video Off Method (all options)
Power Button Function (power off and suspend)
Restore On AC Power Loss (keep off)
Wake-Up Event Activity (disable everything)
I don´t changed or updated the BIOS. I have installed version 1.9. The last according MSI Liveupdate.
Actually, I do not know what to do. I do not think that is any configuration of windows, that this behavior as I have with the minimum configuration, without any operating system. Also disable all wakeup events of the network for nforce chipset from device manager in Windows.
The computer works fine on Windows, I don´t have any “death blue screen”, no hanging, freeze or problems with devices or drivers.
I need your suggestions and assist me with some answers:
Can the new drivers for Vista to make changes directly in the firmware of the components of mainboard? (Especially MSI chipset and Nforce drivers)
Will could have damaged somewhere in the process of changing case? (remember, the computer works fine in windows without errors)
Can I make a degradation of the BIOS firmware to an earlier version?
I will receive all suggestions and ideas to solve my problem. It is a good mainboard and I think ridiculous change for the inconvenience.
Thank you all for your help.
Josh"Same issue with all PSU"
What stats they have? (Amperes per each line)
Also read Moan Guide and provide full details about your PC.
Have you tried with different memory stick?
"Every time I shut down the computer, performs the process smoothly, and when it goes off, the computer is restarted automatically. Do not stay off."
That means auto power on? Have you tried with mainboard out of PC case?(It could be shorting issue, or power switch issue) -
K8N NEO2 Platinum Power off issue
More often than not lately, when I shut windows down, it just hangs at the powering off screen and does not actually power off. I have push the power button to complete shut down. Using Syar's easy Bios 1.C. Anyone with a fix? Thanks
Quote from: MurdoK on 23-November-05, 05:48:37
Hello !!
I know it sounds a bit crazy but please try to set your windows swap file on the same partition ( C:\ ) like windows is.
I have heard people fixed their shutdown problem with it.....
Good luck
Greetz MurdoK
Yes, that is correct, I have had this problem before on another system where the swap file was on another partition, but not the case here. Swap file is on C:\
Thanks to all for the info, I really appreciate it and please keep it coming. -
Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library it says There was an error opening the database for the library. I have tried every thing. I updated the other libr but now it will not open the main to update. What do I do?
Try starting Aperture with the command and option keys held down. You'll get 3 options.
Try each, starting at the top, in order, checking after each to see if it fixes the issue. -
Syncing iphone and now phone is stuck and wont power off or do anything
syncing iphone and now phone is stuck and wont power off or do anything
Reboot the phone: hold down the power button and the home button at the same time until you see the Apple logo. Ignore the "slide to shut down". When the screen has been completely black for a few minutes, press the power button again.
Maybe you are looking for
-
Hi All, We have to talk to OSB11g proxy service which is created as Any Soap service (url: http://myosb.firmname.com:7001/osb-ws) I have java client applications which need to consume this proxy service built on top of OSB by providing the necessary
-
ORB don't want to start: Starting ORB process... Waiting for ORB to be ready.. and ORB is not responding ... null
-
My iPhone has a folder on it in an email account that I did not create. I see my Inbox, drafts, sent, Trash can, Spam folder, Trash Folder and a strange folder I did not create. I cannot delete it. Does anyone know how? Thanks!
-
[svn:fx-trunk] 12792: merge 3.x rev#12715 - trunk
Revision: 12792 Revision: 12792 Author: [email protected] Date: 2009-12-10 08:26:20 -0800 (Thu, 10 Dec 2009) Log Message: merge 3.x rev#12715 -> trunk integrate: Flash Player 10: 10.0.42.34 Flash Player 9: 9.0.260.0 AIR 1.5.3: 20091120ap checki
-
How to disable EZConnect connections?
Anyone run into this problem yet - EZConnect apparently bypassing SSL-tunneling software? My situation: I have been using Oracle nearly ten years. I'm been on 10gR2 since 2005. My sqlnet.ora file (on server and all clients) has the following entry: N