Hanging sessions after webservice call

Hello All
Scenario: ABAP via proxy object calls webservice method exposed from SAP AS Java (which also serves Enterprise Portal) .
After call (successful), session for user Guest (since WS works without authorization) stays on portal server node hanging until timed out (which is quite long). Unfortunately while a lot of calls is issued portal hangs with "User limit exceeded" or similar message.
Question: why those sessions stay hanging? What could be done to get rid of them - shortening timeout period is not an option since regular EP users require current setting. This is NW 7.0.1 environment with java 1.4, which can be the problem due to poor memory management issues.
Any suggestions will be highly appreciated.
Best Regards
Maciej

This was just me being a numpty
I didn't realise that I had to enclose an
<mx:Transition> declaration inside an <mx:transactions>
declaration.
I must read the examples more closely!
However I would have thought that the compiler would have
told me something - or produced an error when I tried to execute
it....

Similar Messages

Session between multiple Webservice calls from PI7.0

Hello XI SDNers,
I am unable to overcome my Webservice session problem using SOAP (Axis) adapter. My scenario is as follows:
I am calling a external Webservice deployed in Axis webservice engine from PI7.0, during my first call: I call synchronous "Login" webservice and I became the response "User is Logged in"
during my second synchronous call "GetItem", the webservice returns "The user doesn't have valid session". The two synchronous calls are executed from same scenario one after another!
I lost my session after the "Login". Is there any way in PI 7.0 to maintain the session?
Note: I tried the same scenario using XML SPY SOAP client, it is working!!! it is maintaining the session between multiple webservice calls.
Is there any suggestions to overcome this problem?
Thanks and regards,
Satish.

Hi Satish,
   We are working on the same sort of scenarios, where we have to call more than one webservice in a sequential fashion using the same session id details.
    What we did was we built new xsds adding session details node using the webserive request and response xsds. And we are maintaining a sessions table which contains session id and status fields in PI. So we send webservice request with the session id details. We wrote an UDF to get the session details from PI and set the status field as busy so that no other request uses the same session details.
   Webserive response again contains the sessions details which can be used for the next webservice request.
Finally after all the calls set back the status to Active in PI table.
Webservice Calls From a User Defined Function
/people/bhavesh.kantilal/blog/2006/11/20/webservice-calls-from-a-user-defined-function
Hope this helps.
Thanks,
Vijaya.

HT201210 I have 4s facing hang problem after updating when i dicline the call the keypad geting locked ,touch stop working unable to unlock the phone .then what i can do i restart the phone with pressing home key & power key together then i am able to ace

I have 4s with 16GB storage capacity using IOS 7.1.2.
Facing hang problem after updating when i decline the call the keypad getting locked ,touch stop working unable to unlock the phone .
Then what i can do i restart the phone with pressing home key & power key together then i am able to access it.
Kindly resolve the issue as soon as possible
Ashish
[email protected]

Did you already try to set it up as a new device, as explained in this article?
iOS: How to back up your data and set up your device as a new device

Webservice call ends in Verify error during after decoding ( after update to Flex builder 3 /Flex builder 2.01 hotfix 3)

Hi all,
I like to ask if someone has ever get or heard from this
error (or may help me to discuss how would be the best way to fix
it). Also please note that the error didn´t occure when I used
Flexbuilder 2.01 Hotfix 2 and the Flashplayer 9.0.47.
The error just occured in myapp when I make a webservice call
which response message includes a array of parameters.
There is one workaround in the WSDL definition of the
parameters, cause the WSDL contains at this place a <choice>
tag, which is just partial supported by FLEX. The workaround for
this is to use an own wsdl for the flex client where the including
tags use attributes for minOccurs="0" maxOccurs="1" .
The console window from FB3 shows (beneath some hundred stack
entries) the following error:
VerifyError: Error #1068: iwp.myapp.searchform.MySearchForm
and iwp.myapp.searchform.MySearchForm cannot be reconciled.
at
iwp.myapp.searchform::MySearchForm/getSearchFormResultHandler()
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at mx.rpc::AbstractOperation/
http://www.adobe.com/2006/flex/mx/internal::dispatchRpcEvent()[E:\dev\flex\sdk\frameworks\ projects\rpc\src\mx\rpc\AbstractOperation.as:196
at mx.rpc::AbstractInvoker/
http://www.adobe.com/2006/flex/mx/internal::resultHandler()[E:\dev\flex\sdk\frameworks\pro jects\rpc\src\mx\rpc\AbstractInvoker.as:198
at
mx.rpc::Responder/result()[E:\dev\flex\sdk\frameworks\projects\rpc\src\mx\rpc\Responder.a s:48]
at
mx.rpc::AsyncRequest/acknowledge()[E:\dev\flex\sdk\frameworks\projects\rpc\src\mx\rpc\Asy ncRequest.as:81]
at
DirectHTTPMessageResponder/completeHandler()[E:\dev\flex\sdk\frameworks\projects\rpc\src\ mx\messaging\channels\DirectHTTPChannel.as:387]
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at flash.net::URLLoader/onComplete()
I really appreciated if somone could help me with this or has
an idea how I can go on.
( one Question Is there a way to get the "open source"
sourcecode before FB3 is released?)
best regards
kcell

Hi all,
today I found the reason for the crash, whcih occure when my
app called the webservice function in the new flashplayer 9.0.115).
The reason was that in the ResultHandler-function of the
webservice call there were nested "switch" conditions used and in
two of the "case" branches a "break;" missed. So the problem could
easily be fixed, but I just want to inform people if the got a
similar problem they should try to start the problem with "empty"
Result/Fault Handler functions.
( the old version (9.0.47) seems to be more robust against a
missing "break;" , but for sure have other leaks and of course
features)
so kepp on flexing ;)
best regards,
kcell

Difference between Session method and call transaction

Hi,
please give me the differences between session method and call transaction,
briefly explaining synchronus , asynchronus, process, update.
Thanks in advance

Hi Vijay Kumar
CLASSICAL BATCH INPUT (Session Method)
CALL TRANSACTION
BATCH INPUT METHOD:
This method is also called as CLASSICAL METHOD.
Features:
Asynchronous processing.
Synchronous Processing in database update.
Transfer data for more than one transaction.
Batch input processing log will be generated.
During processing, no transaction is started until the previous transaction has been written to the database.
CALL TRANSACTION METHOD :
This is another method to transfer data from the legacy system.
Features:
Synchronous processing. The system performs a database commit immediately before and after the CALL TRANSACTION USING statement.
Updating the database can be either synchronous or asynchronous. The program specifies the update type.
Transfer data for a single transaction.
Transfers data for a sequence of dialog screens.
No batch input processing log is generated.
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
Among the two methods call transaction is better compared to session bcoz data transfer is faster in it.
Differences between call transaction and session.
Session Method:
1) Data is not updated in the database table until the session is processed.
2) No sy-subrc is returned.
3) Error log is created for error records.
4) Updation is always synchronous.
Call Transaction Method:
1) Immediate updation in the database table.
2) sy-subrc is returned.
3)Error need to be handled explicitly.
4) updation can be synchronous as well as asynchronous.
2) ya u can use using the N mode no screen.
3)u can't handle multiple transaction in call transaction.
4) u can handle multiple transaction in session using the BDC_INSERT fm.
5)When u go to SM35 u can able to see the error records.
Which is best?
That depends on your requirement. Both of them have there advantages.
According to the situation u can choose any one of these.
difference between batch input and call transaction in BDC Session method.
1) synchronous processing.
2) can tranfer large amount of data.
3) processing is slower.
4) error log is created
5) data is not updated until session is processed.
Call transaction.
1) asynchronous processing
2) can transfer small amount of data
3) processing is faster.
4) errors need to be handled explicitly
5) data is updated automatically
For session method,these are the function modules to b used.
BDC_OPEN_GROUP
BDC_INSERT
BDC_CLOSE_GROUP
For call transaction,this is the syntax.
CALL TRANSACTION TCODE USING BDCDATA
MODE A or E or N
UPDATE A or S
MESSAGES INTO MESSTAB.
Take a scenario where we need to post documents in FB01 and the input file has say 2000 records (2000 documents, not line items in FB01 but 2000 records)
In the BDC call transaction method
We call the transaction FB01 2000 times (once for each record posting) and if the processing fails in record no 3 it can be captured and start with reocord 4.
Eg: Loop at itab.
call transaction FB01
capture errors
endloop.
In the session method.
We do not explicity call the transaction 2000 times, but all the records are appeneded into a session and this session is stored. The processinf of the session is done wwhenever the user wants it to be done. Hence the errors cannot be captured in the program itself
Check these link:
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm
http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
http://www.planetsap.com/bdc_main_page.htm
Batch Input Session method is asynchronous as told by others here. But the advantage of this is that you have all the error messages and the data for each transaction held persistantly. You don't have to code anything for processing them or writing the logs.
But at the same time, the same feature can be disadvantageous if you need to react to an error or if there are too many errors to manually correct in a session. Since the session are created in the program and its execution is done seperately, you loose the trackability of such transactions.
With a call transaction, what was a disadvantage above will become an advantage. Call transaction immediately gives you messages back and you can react to it in your program. But the disadvantage is that, if you have several hundreds of transactions to run, running them from within the program can be resource crunching affair. It will hamper the system performance and you cannot really distribute the load. Of course, you have some mechanisms with which you can overcome this, but you will have to code for it. Also, storing the messages and storing the errored transaction data etc will have to be handled by you in the program. Whereas, in batch input session, your program's job is to just create the session, after that everything is standard SAP system's responsibility.
Ideally, you should do a call transaction if the resources are not a problem and if it fails, put the errored transaction into a session.
You can decide based on the data volume that your BDC is processing. If data volume is high go for session else call transaction will do.The call transaction updates will be instantaneous where as session needs to be processed explictly after creation.
Session Method
1) Session method supports both small amount of data aswell as large amount of data
2) data processing is asynchronus and data updation is synchronus.
3) it process multiple apllication while perfomaning validations.
4) in session method data will be updated in data base only after processing session only.
5) system provide by default logfile for handling error records.
6) it supports both foreground aswell as background process
in bdc we use FM ...
bdc_open_group " for creating Session
bdc_insert " adding transaction and bdcdata table for updating database
bdc_close_group " for closing Session
Call Transaction
1) Call transaction exclusively for small amout of data
2) it supports only one apllication while perfoming validations
3) there is no default logfile, We can explicitly provide logic for creating logfile for handling error records.
we can create logfile by using structure....BDCMSGCOLL
4) it doesn't support background processing.
5) data processing is synchronous and Data updation is Synchronous( default), in
this method also supports daya updation in asynchronus process also.
syntax:
Call transaction <transaction-name> using BDCDATA
mode <A/N/E>
update <L/A/S>
messages into BDCMSGCOLL.
BDC:
Batch Data Communication (BDC) is the process of transferring data from one SAP System to another SAP system or from a non-SAP system to SAP System.
Features :
BDC is an automatic procedure.
This method is used to transfer large amount of data that is available in electronic medium.
BDC can be used primarily when installing the SAP system and when transferring data from a legacy system (external system).
BDC uses normal transaction codes to transfer data.
Types of BDC :
CLASSICAL BATCH INPUT (Session Method)
CALL TRANSACTION
BATCH INPUT METHOD:
This method is also called as CLASSICAL METHOD.
Features:
Asynchronous processing.
Synchronous Processing in database update.
Transfer data for more than one transaction.
Batch input processing log will be generated.
During processing, no transaction is started until the previous transaction has been written to the database.
CALL TRANSACTION METHOD :
This is another method to transfer data from the legacy system.
Features:
Synchronous processing. The system performs a database commit immediately before and after the CALL TRANSACTION USING statement.
Updating the database can be either synchronous or asynchronous. The program specifies the update type.
Transfer data for a single transaction.
Transfers data for a sequence of dialog screens.
No batch input processing log is generated.
For BDC:
http://myweb.dal.ca/hchinni/sap/bdc_home.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/bdc&
http://www.sap-img.com/abap/learning-bdc-programming.htm
http://www.sapdevelopment.co.uk/bdc/bdchome.htm
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://help.sap.com/saphelp_47x200/helpdata/en/69/c250684ba111d189750000e8322d00/frameset.htm
http://www.sapbrain.com/TUTORIALS/TECHNICAL/BDC_tutorial.html
Check these link:
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm
http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
http://www.planetsap.com/bdc_main_page.htm
call Transaction or session method ?
Check the following links:
http://www.sap-img.com/bdc.htm
See below example code :
Call three FM : BDC_OPEN_GROUP,BDC_INSERT and BDC_CLOSE_GROUP.
Once you execute the program and it creates the session at SM35 Transaction.
Report : ZMPPC011
Type : Data upload
Author : Chetan Shah
Date : 05/05/2005
Transport : DV3K919557
Transaction: ??
Description: This ABAP/4 Program creates new Production Versions
(C223). It accepts tab-delimited spreadsheet input and
creates BDC sessions.
Modification Log
Date Programmer Request # Description
06/10/2005 Chetan Shah DV3K919557 Initial coding
report zmppc011 no standard page heading line-size 120 line-count 55
message-id zz.
pool of form routines
include zmppn001.
Define BDC Table Structure
data: begin of itab_bdc_tab occurs 0.
include structure bdcdata.
data: end of itab_bdc_tab.
Input record layout of Leagcy File
data: begin of itab_xcel occurs 0,
matnr(18) type c,
werks(4) type c,
alnag(2) type c,
verid(4) type c,
text1(40) type c,
bstmi like mkal-bstmi,
bstma like mkal-bstma,
adatu(10) type c,
bdatu(10) type c,
stlal(2) type c,
stlan(1) type c,
serkz(1) type c,
mdv01(8) type c,
elpro(4) type c,
alort(4) type c,
end of itab_xcel.
data: begin of lt_pp04_cache occurs 0,
matnr like itab_xcel-matnr,
werks like itab_xcel-werks,
alnag like itab_xcel-alnag,
plnnr like mapl-plnnr,
arbpl like crhd-arbpl,
ktext like crtx-ktext,
end of lt_pp04_cache.
data: v_ssnnr(4) type n,
v_lines_in_xcel like sy-tabix,
v_ssnname like apqi-groupid,
v_trans_in_ssn type i,
wa_xcel LIKE itab_xcel,
l_tabix like sy-tabix,
v_matnr like rc27m-matnr,
v_plnnr like mapl-plnnr,
v_plnal like mapl-plnal,
v_tcode like sy-tcode value 'C223',
v_plnty like plas-plnty value 'R',
v_objty like crhd-objty value 'A',
v_plpo_steus like plpo-steus value 'PP04',
v_verwe like crhd-verwe value '0007'.
Parameters
selection-screen: skip 3.
selection-screen: begin of block 1 with frame.
parameters: p_name like rlgrap-filename
default 'C:\My Documents\InputFile.txt'
obligatory,
bdc session name prefix
p_bdcpfx(6) default 'ZPVCRT'
obligatory,
number for transction per BDC session
p_trnssn type i
default 2000 obligatory,
retain the BDC session after successfull execution
p_keep like apqi-qerase
default 'X',
user who will be executing BDC session
p_uname like apqi-userid
default sy-uname
obligatory.
selection-screen: end of block 1.
possible entry list (F4 dropdown) for input file name
at selection-screen on value-request for p_name.
*-SELECT FILE FROM USERS LOCAL PC
call function 'WS_FILENAME_GET'
exporting
DEF_FILENAME = ' '
def_path = 'C:\Temp\'
mask = ',.,..'
mode = 'O'
title = 'Select File '(007)
importing
filename = p_name
RC =
exceptions
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
others = 5.
if sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
begin the show
start-of-selection.
read data from input file
perform transfer_xcel_to_itab.
loop at itab_xcel.
hang on to xcel line num
l_tabix = sy-tabix.
each line in the xcel file marks begining of new prod.version defn
if num-of-trnas-in-session = 0, create new BDC session
if v_trans_in_ssn is initial.
perform bdc_session_open.
endif.
begin new bdc script for rtg create trans
fill in bdc-data for prod.version maintenance screens
perform bdc_build_script.
insert the bdc script as a BDC transaction
perform bdc_submit_transaction.
keep track of how many BDC transactions were inserted in the BDC
session
add 1 to v_trans_in_ssn.
if the user-specified num of trans in BDC session is reached OR
if end of input file is reached, close the BDC session
if v_trans_in_ssn = p_trnssn or
l_tabix = v_lines_in_xcel.
perform bdc_session_close.
clear v_trans_in_ssn.
endif.
endloop.
top-of-page.
call function 'Z_HEADER'
EXPORTING
FLEX_TEXT1 =
FLEX_TEXT2 =
FLEX_TEXT3 =
FORM TRANSFER_XCEL_TO_ITAB *
Transfer Xcel Spreadsheet to SAP Internal Table *
form transfer_xcel_to_itab.
Read the tab-delimited file into itab
call function 'WS_UPLOAD'
exporting
filename = p_name
filetype = 'DAT'
IMPORTING
filelength = flength
tables
data_tab = itab_xcel
exceptions
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_table_width = 4
invalid_type = 5
no_batch = 6
unknown_error = 7
others = 8.
if sy-subrc = 0.
sort the data
sort itab_xcel by matnr werks.
clear v_lines_in_xcel.
if no data in the file - error out
describe table itab_xcel lines v_lines_in_xcel.
if v_lines_in_xcel is initial.
write: / 'No data in input file'.
stop.
endif.
else.
if file upload failed - error out
write: / 'Error reading input file'.
stop.
endif.
endform.
FORM BDC_SESSION_OPEN *
Open BDC Session *
form bdc_session_open.
create bdc session name = prefix-from-selectn-screen + nnnn
add 1 to v_ssnnr.
concatenate p_bdcpfx v_ssnnr into v_ssnname.
open new bdc session
call function 'BDC_OPEN_GROUP'
exporting
client = sy-mandt
group = v_ssnname
keep = p_keep
user = p_uname
exceptions
client_invalid = 1
destination_invalid = 2
group_invalid = 3
group_is_locked = 4
holddate_invalid = 5
internal_error = 6
queue_error = 7
running = 8
system_lock_error = 9
user_invalid = 10
others = 11.
endform.
FORM BDC_BUILD_SCRIPT *
Build BDC *
form bdc_build_script.
data: l_arbpl like crhd-arbpl,
l_text1 like mkal-text1,
l_mdv01 like mkal-mdv01,
l_mapl like mapl.
clear bdc-data itab - begin of new bdc transaction
clear itab_bdc_tab.
refresh itab_bdc_tab.
read material cross reference tables to determine sap part#
clear : v_matnr, v_plnnr, v_plnal.
perform read_matnr_cross_ref using itab_xcel-matnr
itab_xcel-werks
changing v_matnr.
determine the version description to use
if itab_xcel-text1 is initial.
l_text1 = itab_xcel-verid.
else.
l_text1 = itab_xcel-text1.
endif.
determine the routing group# and group ctr# to use
perform read_routing .
determine the production line to use
if itab_xcel-mdv01 is initial.
if not provided in the file then:
prod line = work ctr on the last PP04 op of the rtg determined above
perform read_wc_on_last_pp04 using v_plnnr v_plnal
changing l_mdv01.
NOTE: when executing the above form\routine, if v_plnnr is initial
or v_plnal is initial, THEN l_mdv01 will automatically be
returned blank (ie initial)
else.
l_mdv01 = itab_xcel-mdv01.
endif.
build bdc script
perform bdc_build_script_record
fill in initial screen
using: 'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=ENTE',
' ' 'MKAL-WERKS' itab_xcel-werks,
' ' 'MKAL-MATNR' v_matnr,
' ' 'MKAL_ADMIN-DISPO' space,
' ' 'MKAL-PLNNR' space,
' ' 'MKAL_ADMIN-STTAG' space,
' ' 'MKAL-PLNNG' space,
' ' 'MKAL-MDV01' space,
' ' 'MKAL-PLNNM' space,
click create button on initial screen and go to detail screen
'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=CREA',
fill in the detail screen and go back to initial screen
'X' 'SAPLCMFV' '2000',
' ' 'BDC_OKCODE' '=CLOS',
' ' 'MKAL_EXPAND-MATNR' v_matnr,
' ' 'MKAL_EXPAND-VERID' itab_xcel-verid,
' ' 'MKAL_EXPAND-TEXT1' l_text1,
' ' 'MKAL_EXPAND-BSTMI' itab_xcel-bstmi,
' ' 'MKAL_EXPAND-BSTMA' itab_xcel-bstma,
' ' 'MKAL_EXPAND-ADATU' itab_xcel-adatu,
' ' 'MKAL_EXPAND-BDATU' itab_xcel-bdatu,
' ' 'MKAL_EXPAND-PLTYG' v_plnty,
' ' 'MKAL_EXPAND-PLNNG' v_plnnr,
' ' 'MKAL_EXPAND-ALNAG' v_plnal,
' ' 'MKAL_EXPAND-STLAL' itab_xcel-stlal,
' ' 'MKAL_EXPAND-STLAN' itab_xcel-stlan,
' ' 'MKAL_EXPAND-SERKZ' itab_xcel-serkz,
' ' 'MKAL_EXPAND-MDV01' l_mdv01,
' ' 'MKAL_EXPAND-ELPRO' itab_xcel-elpro,
' ' 'MKAL_EXPAND-ALORT' itab_xcel-alort,
save the production version from initial screen
'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=SAVE'.
endform.
FORM BDC_SUBMIT_TRANSACTION *
Submit BDC Session *
form bdc_submit_transaction.
Load BDC script as a trqansction in BDC session
call function 'BDC_INSERT'
exporting
tcode = v_tcode
tables
dynprotab = itab_bdc_tab
exceptions
internal_error = 01
not_open = 02
queue_error = 03
tcode_invalid = 04.
endform.
FORM BDC_BUILD_SCRIPT_RECORD *
form bdc_build_script_record using dynbegin name value.
clear itab_bdc_tab.
if dynbegin = 'X'.
move: name to itab_bdc_tab-program,
value to itab_bdc_tab-dynpro,
'X' to itab_bdc_tab-dynbegin.
else.
move: name to itab_bdc_tab-fnam,
value to itab_bdc_tab-fval.
shift itab_bdc_tab-fval left deleting leading space.
endif.
append itab_bdc_tab.
endform.
FORM BDC_SESSION_CLOSE *
Close BDC Session *
form bdc_session_close.
close the session
call function 'BDC_CLOSE_GROUP'
exceptions
not_open = 1
queue_error = 2
others = 3.
skip 2.
if sy-subrc ne 0.
write: / 'Error Closing BDC Session ' , 'RETURN CODE: ', sy-subrc.
else.
write : / 'Session created:', v_ssnname,
50 '# of transactions:', v_trans_in_ssn.
endif.
endform.
*& Form read_routing_cache
*FORM read_routing_cache USING pi_matnr
pi_werks
pi_alnag
pi_verid
pi_mdv01.
DATA: BEGIN OF lt_plpo OCCURS 0,
vornr LIKE plpo-vornr,
objty LIKE crhd-objty,
objid LIKE crhd-objid,
arbpl LIKE crhd-arbpl,
END OF lt_plpo,
l_mapl_plnnr LIKE mapl-plnnr.
determine the routing group#
CLEAR lt_pp04_cache.
chk if its in the cache first, if not then get it from MAPL table
and put it in the cache
READ TABLE lt_pp04_cache WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
IF sy-subrc = 0.
do nothing - lt_pp04_cache header line has rtg#
ELSE.
get the routing group # from MAPL
SELECT plnnr INTO l_mapl_plnnr
FROM mapl UP TO 1 ROWS
WHERE matnr = pi_matnr AND
werks = pi_werks AND
plnty = 'R' AND
plnal = pi_alnag AND
loekz = space.
ENDSELECT.
put it in the cache internal table
IF NOT l_mapl_plnnr IS INITIAL.
lt_pp04_cache-matnr = pi_matnr.
lt_pp04_cache-werks = pi_werks.
lt_pp04_cache-alnag = pi_alnag.
lt_pp04_cache-plnnr = l_mapl_plnnr.
APPEND lt_pp04_cache.
ENDIF.
ENDIF.
if the rtg# was determined AND
-- the work center was not determined yet AND
-- work center was really needed for this line in the input file
then
-- read the work center from last PP04 operation on the routing
-- update the cache accordingly
IF NOT lt_pp04_cache-plnnr IS INITIAL AND
lt_pp04_cache-arbpl IS INITIAL AND
( pi_verid IS INITIAL OR
pi_mdv01 IS INITIAL ).
read the last PP04 operation
CLEAR lt_plpo.
REFRESH lt_plpo.
SELECT vornr eobjty eobjid e~arbpl
INTO CORRESPONDING FIELDS OF TABLE lt_plpo
FROM plas AS b
INNER JOIN plpo AS c
ON bplnty = cplnty AND
bplnnr = cplnnr AND
bzaehl = czaehl
INNER JOIN crhd AS e
ON carbid = eobjid
WHERE b~plnty = v_plnty AND
b~plnnr = lt_pp04_cache-plnnr AND
b~plnal = lt_pp04_cache-alnag AND
c~loekz = space AND
c~steus = v_plpo_steus AND
e~objty = v_objty AND
e~werks = lt_pp04_cache-werks AND
e~verwe = v_verwe.
SORT lt_plpo BY vornr DESCENDING.
READ TABLE lt_plpo INDEX 1.
IF NOT lt_plpo-arbpl IS INITIAL.
lt_pp04_cache-arbpl = lt_plpo-arbpl.
read work center description
SELECT SINGLE ktext INTO lt_pp04_cache-ktext
FROM crtx WHERE objty = lt_plpo-objty AND
objid = lt_plpo-objid AND
spras = sy-langu.
the following read will get the index of the correct record to be
updated in the cache
READ TABLE lt_pp04_cache
WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
MODIFY lt_pp04_cache
INDEX sy-tabix
TRANSPORTING arbpl ktext.
ENDIF.
ENDIF.
*ENDFORM. " read_last_pp04_operation_cache
*& Form read_routing
form read_routing.
data: begin of lt_mapl occurs 0,
plnnr like mapl-plnnr,
plnal like mapl-plnal,
end of lt_mapl,
l_arbpl like crhd-arbpl.
get all the rtg# and grp ctr# from MAPL
select plnnr plnal
into corresponding fields of table lt_mapl
from mapl
where matnr = v_matnr and
werks = itab_xcel-werks and
plnty = v_plnty and "Rate Routing
loekz = space. "with del flag = OFF
sort lt_mapl by plnal.
if not itab_xcel-verid is initial.
if the verid=0001 then use the 1st good rtg-grp# and grp-ctr#
if itab_xcel-verid = '0001'.
read table lt_mapl index 1.
v_plnnr = lt_mapl-plnnr.
v_plnal = lt_mapl-plnal.
else.
if the verid0001 then use the rtg-grp# and grp-ctr# of the routing
whose work center on the last PP04 operation matches the given verid
loop at lt_mapl.
clear l_arbpl.
get the work center from the last PP04 operation
perform read_wc_on_last_pp04 using lt_mapl-plnnr
lt_mapl-plnal
changing l_arbpl.
if itab_xcel-verid = l_arbpl.
v_plnnr = lt_mapl-plnnr.
v_plnal = lt_mapl-plnal.
exit.
endif.
endloop.
endif.
else.
do nothing
endif.
For version IDs that are other then '0000' or 'ZWIP' :--
if itab_xcel-verid NE '0000' and
itab_xcel-verid NE 'ZWIP'.
if routing group# or group counter was not determined, make the
valid-to date 99/99/9999 so that the BDC, on execution, errors out.
if v_plnnr is initial or
v_plnal is initial.
itab_xcel-bdatu = '99/99/9999'.
endif.
endif.
determine the routing group#
CLEAR lt_pp04_cache.
chk if its in the cache first, if not then get it from MAPL table
and put it in the cache
READ TABLE lt_pp04_cache WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
IF sy-subrc = 0.
do nothing - lt_pp04_cache header line has rtg#
ELSE.
get the routing group # from MAPL
put it in the cache internal table
IF NOT l_mapl_plnnr IS INITIAL.
lt_pp04_cache-matnr = pi_matnr.
lt_pp04_cache-werks = pi_werks.
lt_pp04_cache-alnag = pi_alnag.
lt_pp04_cache-plnnr = l_mapl_plnnr.
APPEND lt_pp04_cache.
ENDIF.
ENDIF.
if the rtg# was determined AND
-- the work center was not determined yet AND
-- work center was really needed for this line in the input file
then
-- read the work center from last PP04 operation on the routing
-- update the cache accordingly
IF NOT lt_pp04_cache-plnnr IS INITIAL AND
lt_pp04_cache-arbpl IS INITIAL AND
( pi_verid IS INITIAL OR
pi_mdv01 IS INITIAL ).
read the last PP04 operation
CLEAR lt_plpo.
REFRESH lt_plpo.
SELECT vornr eobjty eobjid e~arbpl
INTO CORRESPONDING FIELDS OF TABLE lt_plpo
FROM plas AS b
INNER JOIN plpo AS c
ON bplnty = cplnty AND
bplnnr = cplnnr AND
bzaehl = czaehl
INNER JOIN crhd AS e
ON carbid = eobjid
WHERE b~plnty = v_plnty AND
b~plnnr = lt_pp04_cache-plnnr AND
b~plnal = lt_pp04_cache-alnag AND
c~loekz = space AND
c~steus = v_plpo_steus AND
e~objty = v_objty AND
e~werks = lt_pp04_cache-werks AND
e~verwe = v_verwe.
SORT lt_plpo BY vornr DESCENDING.
READ TABLE lt_plpo INDEX 1.
IF NOT lt_plpo-arbpl IS INITIAL.
lt_pp04_cache-arbpl = lt_plpo-arbpl.
read work center description
SELECT SINGLE ktext INTO lt_pp04_cache-ktext
FROM crtx WHERE objty = lt_plpo-objty AND
objid = lt_plpo-objid AND
spras = sy-langu.
the following read will get the index of the correct record to be
updated in the cache
READ TABLE lt_pp04_cache
WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
MODIFY lt_pp04_cache
INDEX sy-tabix
TRANSPORTING arbpl ktext.
ENDIF.
ENDIF.
endform. " read_last_pp04_operation_cache
*& Form read_wc_on_last_pp04
form read_wc_on_last_pp04 using pi_plnnr
pi_plnal
changing pe_arbpl.
data: begin of lt_plpo occurs 0,
vornr like plpo-vornr,
objty like crhd-objty,
objid like crhd-objid,
arbpl like crhd-arbpl,
end of lt_plpo.
get all the PP04 operations for the given rtg# & grp-ctr#
select vornr eobjty eobjid e~arbpl
into corresponding fields of table lt_plpo
from plas as b
inner join plpo as c
on bplnty = cplnty and
bplnnr = cplnnr and
bzaehl = czaehl
inner join crhd as e
on carbid = eobjid
where b~plnty = v_plnty and "Rate Routing
b~plnnr = pi_plnnr and
b~plnal = pi_plnal and
c~loekz = space and "Oper Del Flag = OFF
c~steus = v_plpo_steus and "PP04
e~objty = v_objty. "WC Obj Type = 'A'
read the last operation
sort lt_plpo by vornr descending.
read table lt_plpo index 1.
pe_arbpl = lt_plpo-arbpl.
endform. " read_wc_on_last_pp04
Goto LSMW-> Select Direct Input method in 1st step. These are the standard programs for data transfer.
Otherwise goto SPRO->SAP Reference IMG-> Under this you'll find standard data transfer programs module wise.
Reward points,
Shakir

Session method and call transaction methos which one is the sap recomonded

hi
PLease give me the answer to these questions.
session method and call transaction methos which one is the sap recomonded why .
2) if we want to maintain BDC program in all the systems.wt to d0

Hi Revethi,
Here is the difference between the Session and Call Transaction method.
Session
Session method supports both small amount of data aswell as large amount of data
2) data processing is asynchronus and data updation is synchronus.
3) it process multiple apllication while perfomaning validations.
4) in session method data will be updated in data base only after processing session only.
5) system provide by default logfile for handling error records.
6) it supports both foreground aswell as background process
in bdc we use FM ... bdc_open_group " for creating Session
bdc_insert " adding transaction and bdcdata table for updating database
bdc_close_group " for closing Session
Call Transaction
Call transaction exclusively for small amout of data
2) it supports only one apllication while perfoming validations
3) there is no default logfile, We can explicitly provide logic for creating logfile for handling error records.
we can create logfile by using structure....BDCMSGCOLL
4) it doesn't support background processing.
5) data processing is synchronous and Data updation is Synchronous( default), in
this method also supports daya updation in asynchronus process also.
Syntax:
Call transaction <transaction-name> using BDCDATA
mode <A/N/E> update <L/A/S>
messages into BDCMSGCOLL.

When I am on a call in my car I can play and hear the music on my iPhone but when I hang up from the call the music reverts back to my iPhone speaker.

when I am on a phone call in my car I can play and hear my iPhone music thru the car speakers but when I hang up from the call, the sound reverts to my iPhone speaker and longer plays thru the car speaker.

Hello, Jordanali.
Thank you for visiting Apple Support Communities.
I understand that your car will not resume playing music after accepting a call. Here is a troubleshooting article that I would recommend going through when experiencing this issue.
Get help using your iPhone, iPad, or iPod touch with your car stereo
http://support.apple.com/en-us/HT203412
Cheers,
Jason H.

Photoshop Elements 13 running in Windows 8.1 hangs immediately after starting

Photoshop Elements 13 running in Windows 8.1 hangs immediately after starting. Has to be shut down by Task Manger. Task Manger shows that it is still using some CPU. Ran Procmon (part of Sysinternals) which shows that it is in a loop. Stack trace shows it is executing code in AMTValidateProductLicense.dll. Started happening about a month after I installed PSE. Everything used to work fine at first. Have tried going back to an old image of Win 8.1 on a different hard drive, otherwise same computer, and installed PSE 13 from DVD. That installation never worked, it aways hangs. If I do a clean boot, it sometimes runs long enough for me to click on a menu item and then hangs the same way. And, yes I bought a new DVD to run on this computer, never been used in any other way. Any ideas how I can get PSE running properly?

It really doesn't look like a licensing issue, it seems to be code in the area of license validation that isn't working.
I took your suggestion and initiated a couple of chat sessions with support, but so far still no luck. The latest session with Neeraj seemed to be promising. After some investigation he asked to reinstall. First he uninstalled with Revo Uninstall, which seemed to be pretty thorough. That required a restart, so he set things up to restore his conference session and took my phone number. Unfortunately I guess his connection didn't come back. When I didn't hear from him after a couple of hours I tried installing Photoshop and Premiere myself. As before, Premiere works and Photoshop doesn't. When I start Photoshop, the window opens and for a couple of seconds menus open when I click on them. Then the window freezes and I have to use Task Manager to kill it. So basically, I've tried several things but I'm back where I've been all along, I can't get Photoshop to work. I'd really appreciate suggestions about something else to try.
I wish someone at Adobe was interested in the Process Monitor traces I've made, because I'm sure someone who knows the code would be able to figure out pretty quickly what's happening. Is it trying to read a file that's not there, failing to write a file, failing to make an internet connection or what? It really shouldn't be this hard to figure out.

Hanging Sessions in SAP ITSmobile/Standalone SAP ITS Gateway

Hi,
We have recently implemented SAP ITSmobile/Standalone SAP ITS gateway 6.20 (6200.1035.9507.7, build 1121051 - Single host) connected to LXE RDT device for warehouse operation.
In warehouse forklift operators quite often lose connection to Wireless access point,which is creating orphan sessions in background and not getting cleared sometimes from the system, we have to manually Clear(kill) the sessions .
I have introduced following parameters in SAP ITS instance in ALL SERVICES. pls let me know, is there any parameter need to be enforced to clear the hanging session. Apprecitete your help.
Parameters in SAP ITS Gateway Instance:
~disconnectonclose = 1
~timeout = 30
~usertimeout = 0
Also, I see following log entries in access log, what could be the reason for ???? in the access log ?
2011-07-11T16:23:03.431 00, s000000000A83DD00, IP 10.64.44.186, *zzits_r3_sp, , 2011-07-11T16:25:06.507 00, s0000000000000000, IP ???.???.???.???, command AgateShmGet:Proc:ITP 2011-07-11T16:25:06.523 00, s0000000000000000, IP ???.???.???.???, command AgateShmGet:Proc:ITP 2011-07-11T16:25:06.523 00, s0000000000000000, IP ???.???.???.???, command AgateShmGet:Proc:ITP 2011-07-11T16:25:06.523 00, s0000000000000000, IP ???.???.???.???, command AgateShmGet:peak:ITP 2011-07-11T16:25:06.539 00, s0000000000000000, IP ???.???.???.???, command AgateShmGet:Thrd:ITP:0 2011-07-11T16:25:06.554 00, s0000000000000000, IP ???.???.???.???, command AgateShmGet:Sess:ITP:0
Regards,
Soma

Hello Soma,
With the ITS 6.20 you can use the ~timeout parameter to change the session timeout in minutes. Basically the value, in minutes, will determine when the session terminated after that period of inactivity. This can be changed on a per service level. So if you think the wireless connection is lost every 10 minutes and the users should have activity every 5 minutes then it is safe to change the ~timeout value to 10.
In the access.log the question marks (?) are when a request is made before there is user information, that would mostly be the logon page. The entries with "command" in it are requests from the ITS ADM instance.
Edgar

Making a REST webservice call. Error code: 401 Access to the requested resource is not allowed

Hi All,
I’m having a hard time figuring out how to make Rest WebService calls.
I tried executing this directly through browser and I get an error.
http:localhost:8080/rest/bean/atg/userprofiling/ProfileServices/loginUser?arg1=[email protected]&arg2=Password
13:18:20,613 ERROR [RestSecurityServlet] Error code: 401
Access to the requested resource is not allowed: /atg/userprofiling/ProfileServices
atg.rest.RestException: Access to the requested resource is not allowed: /atg/userprofiling/ProfileServices
at atg.rest.processor.RestSecurityProcessor.checkAccess(RestSecurityProcessor.java:546)
at atg.rest.processor.RestSecurityProcessor.handleGetRequest(RestSecurityProcessor.java:313)
at atg.rest.processor.RestSecurityProcessor.doRESTGet(RestSecurityProcessor.java:199)
at atg.rest.servlet.RestPipelineServlet.serviceRESTRequest(RestPipelineServlet.java:417)
at atg.rest.servlet.RestPipelineServlet.service(RestPipelineServlet.java:260)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:157)
at atg.servlet.pipeline.PipelineableServletImpl.service(PipelineableServletImpl.java:320)
at atg.rest.servlet.RestPipelineServlet.service(RestPipelineServlet.java:264)
at atg.rest.servlet.HeadRestServlet.service(HeadRestServlet.java:130)
at atg.servlet.pipeline.PipelineableServletImpl.service(PipelineableServletImpl.java:267)
From the documentation I understand that I need to create a session, is the session only necessary to access secured components since this
particular method “ProfileServices.loginUser “ has been declared as not secure in restSecurityConfiguration.xml
Also, are there two different ways in which I can log in
1. Using RestSession.createSession providing the username and password.
2. Or using ProfileServices.loginUser or ProfileFormHandler
Can someone please clarify

If you are invoking the REST web-service from a Java client then you can create a RestSession object using the createSession method. But in your case you seem to be invoking it with a HTTP request which by default would be treated as a GET request by ATG's REST implementation. Therefore being a GET, it would try to fetch a property "loginUser" from /atg/userprofiling/ProfileServices component (based on your URL) which would always fail.
To invoke loginUser() method of ProfileServices with your passed argument you need to tell ATG's REST system to treat your incoming request not as GET but as a POST request which you can do using atg-rest-http-method control parameter in your request like this
http:localhost:8080/rest/bean/atg/userprofiling/ProfileServices/loginUser?arg1=[email protected]&arg2=Password&atg-rest-http-method=POST
It should work this way provided your restSecurityConfiguration.xml is proper.

XMII 12.x Can you get the Server's Time Zone from a webservice call?

Is there a MII / NW webservice call to get the server's time zone?

After thinking about it a little my best approach was just a simple JSP page, because I really was more intersted in the servers GMT offset.
<%@page import="java.util.*" %>
<%
Calendar myCalendar = new GregorianCalendar();
int gmtOffset = (myCalendar.get(Calendar.ZONE_OFFSET) + myCalendar.get(Calendar.DST_OFFSET))/(1000 * 3600);
%>
<%=gmtOffset %>

Endeca webservice call from different Application.

I am trying to call the Endeca (v2.2.2) Webservice, using the client generated class file from the wsdl file (conversation.wsdl) and pass the query to get the result. Steps so far did
•     Use apache cxf codegen plugin 2.7.0 to generate the client classes using the above wsdl.
•     Written junit test case for client class and send the query to server. I can connect to the server but getting back the ConversationFault: Sequence has length 0 but must have length 1
•     The only method I can use to call from the client is conversationPort.query(request), which is generated by cxf wd12java
•     Following is the line of code from the client class
ContentElementConfig config = new ContentElementConfig();
config.setHandlerFunction("AS select max(p_common_date_epoch) as 'MaxDate' where Social_Media_Type = 'Twitter' group by interaction_author_username, interaction_text, interaction_link, Klout_Score, Followers_Count, DocumentSentiment, calculated_entity_sentiment, SalienceSentiment order by MaxDate desc, Followers_Count desc page (0,50)");
Request request = new Request();
request.setState(null);
request.getContentElementConfig().add(config);
Client Call: Results results = webServiceClient.readQueryResults(request); // this method internally calls conversationPort.query(request).
Any thoughts or recommendation please advise.
Edited by: user4993272 on May 9, 2013 10:57 AM

Hi,
i have two application take as App1 and App2 .i want to make a webservice call from App1 to App2 . through this webservice call i will pull the data from App2 and populate the data inside a .jspx file.
i am not understanding how i will do that.
A service wont allow you to access the live instance of an application and instead create its own data session. So while you can query data that belongs to App2, you wont be able e.g. to access a users uncommitted data changes
Frank

Webservice call from Filter

I would like to be able to call an external webservice at the end of a UCM filter event . Basically after the UCM processing is done i would like to make an external webservice call which would update a status in an external application. How can i accomplish this ? can you please share any code sample if you have

I was looking to actually looking for API within UCM to create a webservice client to execute external webservices? I did not see if anything inbuilt was available for this purpose. One alternate solution I was looking into was using apache axis 2 with my component to see if it will work.

Webservice call from acrobat form

Hello guys i hope someone can help me. i'm simply trying to make a simple webservice call when an acrobat pdf form is opened on the server.
does anyone have any examples or any clear documentation i tried using the examples on the documentation but im not getting anywhere.
Thanks
in advance for your help.

Hi Juergen,
I am using it as a WSDL based data connection.
How do i check this WSDL through a web browser? I have checked it through SICF Transaction code, It gives the output in explorer as given in the first post of this thread..
Please help me resolving this issue, i feel that this issue is somewhere related to the role assignment of the user as if i provide this user an authorization of SAP_ALL then everything starts working fine, but after removing SAP_ALL this error is encountered, do u hav any pin points on this??
Thanks
Amita

Webservice call from one application to another application

Hi all,
I am new in ADF and using jdeveloper version 11.1.1.0.0. Now I am working in an application where my steps are as follows,
i have two application take as App1 and App2 .i want to make a webservice call from App1 to App2 . through this webservice call i will pull the data from App2 and populate the data inside a .jspx file.
i am not understanding how i will do that.
please give your useful comments.

Hi,
i have two application take as App1 and App2 .i want to make a webservice call from App1 to App2 . through this webservice call i will pull the data from App2 and populate the data inside a .jspx file.
i am not understanding how i will do that.
A service wont allow you to access the live instance of an application and instead create its own data session. So while you can query data that belongs to App2, you wont be able e.g. to access a users uncommitted data changes
Frank

Hanging sessions after webservice call

Similar Messages

Maybe you are looking for