Hanging TV in Basement

Hi - I have a finished basement so I am pretty sure that behind my walls in the foundation - Cement. This was like this when I bought the house so I am not sure if there are studs behind the plaster. Will Geek Squad still be able to hang my TV?
Its a 42 inch Panasonic Plasma. I have it on a stand right now, but want to hang it for safety. (Kids).
Thanks

They should be able to -- I just wall mounted a 55" TV myself -- granted it was a super light Samsung LED series, but you should be able to mount into concrete as that was one of the elements the instructions described mounting into.
It should be somewhat similar to mounting it into wood / the studs in your wall.
The distinctly different method for wall mounting is when you don't have any concrete or wood studs available -- only drywall. I personally wouldn't be too comfortable doing drywall only.

Similar Messages

Lumia 520 hangs on regular basis and needs battery...

It's a quite new phone and not much installed on it, however a few days ago it started to hang on a daily basis. When it hangs nothing can be done, no button works or screen and the phone become basically useless. battery must be removed in order to reboot it.
is there any known issue with the lumia 520 or would that be my phones problem warranty covered?

have you tried to hard format the device through the settings?
if it still continues to do this after a hard format, then i would bring it in...frozen and request a replacement device, especially if you just purchased this device. you should not have to deal with this issue if it is that new.

Hello sir this is anshul from india i am using i phone 4 16gb and my i phone is hanging on daily basis with my views i am thinking may be ios 7.1 is not compatible for the i phone 4 and if it can be possible my software can be degrade kindly tell me as oo

HELLO APPLE SUPPORT THIS IS ANSHUL FROM INDIA AND ONE THING I WANNA KNOW HOW CAN WE DEGRADE THE SOFTWARE OF I PHONE BCZ I AM USING IOS 7.1 BUT IT IS NOT COMPATIBLE FOR THE APPLE 4 16GB SO IWANNA DEGARDE IT KIINDLY TELL ME AS SOON AS POSSIBLE

Hi anu,
Apple provides no downgrade path for the iOS. You need to check your setting and do some troubleshooting (do a search of this forum for suggestions). I have an iPhone 4, and I am running iOS 7.1.1 with no issues.
Cheers,
GB

The third or fourth communication, firefox freezes many times/day, have to close down and restart firefox 5.0

I've upgraded to 5.0 firefox, and it freezes many times a day-have to close firefox and restart firefox - I've written you at least three other times about this and there's not been communication or resolution to this problem. This is really unacceptable - get back to me please.

So you have other postings, and what did you say there and what did you learn. Opening up another question doesn't help us to help you, if we have to start over each time. We want to know what you have done to try to fix the problem as well.
You can click on "My Contributions" (at the top of a main forum page)
or this link -- https://support.mozilla.com/questions?filter=my-contributions
I have no way of knowing what you posted before unless you stick to the same posting.
Here are some references that are likely to help
* '''Problematic extensions''' - MozillaZine Knowledge Base http://kb.mozillazine.org/Problematic_extensions
* '''Firefox hangs''' - MozillaZine Knowledge Base http://kb.mozillazine.org/Firefox_hangs
* '''Firefox crashes''' - MozillaZine Knowledge Base http://kb.mozillazine.org/Firefox_crashes

An access control proxy in front of my JSP pages

Hi All,
I want to protect the access to my jsp pages. If for example the user types in his browser www.abc.com/page1.jsp, I want to capture that request and pass it to an access control engine. If the user is authorized then he should get that page if not he should be directed to another page.
any answers will be appreciated ... I'm using tomcat 5.5.

For example the user types in his browser www.abc.com/page1.jsp, I want to capture that request and pass it to an access control engine. If the user is authorized then he should get that page if not he should be directed to another page.
Focus a bit on your design: Ask yourself how will the whole world accessing the page can be identified?
It is via machine to machine authentication and handshake or user authentication and authorisation?
Machine to machine will happen on a VPN infrastracture where specified connections are directed to a host port else the other, or user authentication and authorisation where user login to determine which bit of yourr page he has access to, then using MVC framework you can say hang-on! base on your credential you're authorised to use this page instead.
Note if no one is identifying him/herself on your system before having access to the required resource then your design aim sounds excuse me to say abit difficult to achieve. Again from the look at things you're trying to achieve this using acccess router, please if that is the case then think otherwise because it is not possible,
Edited by: bidox on Mar 29, 2008 9:25 AM

How to make 1sec long sequence out of 7 PS layers in CS5 at 7fps?

I can not make 1sec long clip containing lets say 7(or 14 or 28) frames only. It would be either 30 or 25 devided so that the number is even. Like 30fps=3;10;15 etc and 25fcp=5.
It works with CS3 as you see on the picture, but not with CS5. CS3 allow to change time Base when you change the Frame Rate. How can we make AE CS5 not to hang on the Base 25 or 30?

Simply set the project time base setting to Auto in teh project settings - just like in CS3. This hasn't changed.
Mylenium

Need help to fix my computer, dude: crashes

I am Manoj. I am from India. There is a problem with my desktop computer. Now days, it gets hanged on regular basis due to which I am unable to work with it. Sometimes it hangs 10-12 times a day. I need help to fix my computer, dude. One more thing sometimes when it hangs, there are many horizontal lines on the monitor and I hear a sound of beep from the CPU.Please help me.
Thanks.

Hello manojyd,
The problem is it could be a huge list of things that is causing the issue.
Let's start by stress testing the system and seeing if it gets too hot.
How to Stress Test your Hardware for Stability and Heat Problems with Prime95
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

KT4 Ultra & ATI 9700 & Black screen HELP

Hi guys,
After first uninstalling the Nvidia drivers and then powering down and removing the Geforce 4 card, I installed a brand new ATI 9700 that I got from Mwave.com for $199.00. When I turn on the power all I get is a black screen - I can't see anything on the screen but I can see my computer trying to post by watching the lights on the drives and observing the D-Bracket.
The D-Bracket is indicating a system hang on "Testing base memory from 240k to 640k and extending memory above 1MB using various patterns". Led's 1&3 red and 2&4 green.
I did hook up the 12 volt adapter that came with the the board at two different locations just to make sure there was not a problem with power. I also checked for the presence of voltage at the adapter right at the card with a volt meter (12.3 volts). I also swapped the power connector from the floppy to the video card. The cooling fan on the card is coming on. I made sure the power connector was connected prior to powering up my system. I also tried clearing NVRAM. What is wrong??? Any ideas out there? Do I have a bad card right out of the box ???
For now I had put my Geforce4 Ti 4200 back in so I can use my computer again.
My current system & settings:
Antec case, 400w P/S +3.3/28amps +5/40amps +12/18amps
WinXP Home Sp2. Dx9.0a
MSI KT4 Ultra biosv1.4 (boot) 4x AGP (there is no 8x option in bios)/ Fast Write disabled & enabled/ AGP Aperture size 64&128mb, AGP voltage set to AUTO. NOTHING IS OVERCLOCKED fsb 166, cas 2.5
AMD Barton 2500+
2-512m Corsair XMS3200
2-80 gig Maxtor Raid Strip 0
52xDVD
12x8x4 Burner
Linksys 10/100 ethernet card
Zoom 56k modem
4-80mm fans
My brand new 9700 card:
Model: OEM Generic MIC powered by ATI
Board revision: AO2
S/N:G0306025237
Memory: 128meg Infineon DDR SGRAM 3.3n
MajorDan

for one try removing one of your memory sticks,,try that first,,,make sure your fsb of the cpu and the memory are 166,,,,it will auto detect the 8x agp if the card suports it,,,,,,do you have the card setted all the wat,,,,,,,,,,double check memory settings,,this card i have found does not like fsb messed with or the memory fsb messed with.....set memory to spd,,,,good luck

Help! bent case :(

my mb pro accidentally fell off my desk..the back lefthand corner bent and now where the back of the screen panel meets the plastic is separating and when i close it, the left side of the screen hangs over the base on the left....its off center. my isight camera stopped working, i'm unsure if its related but i already tried repairing my permissions to no avail. i cant live without my computer for a very long time because of my job and school....and i'm scared it will cost way too much to fix it. it literally just breaks my heart that its broken and it bothers me far too much to leave alone. any suggestions? options? :\
thanks
carol-anne

Your only option is to get it fixed. But with as many parts as you say are damaged, the cost of labor and parts would probably warrant you just buying a new computer.

Open email & top of bar says fire fox not responding & get script error on page asking to stop script or continue. Loading most mail or sites is slow now that I returned from Japan and using same laptop. Any ideas?

my laptop stops responding when I open email right in the middle of writing email or checking email and when I open bookmarks. Up the top it says firefox not responding and a script error block opens asking me to continue or stop script. It give me this same error all the time no matter if I select continue or stop script.

As far as email sites go. The "Adblock Plus" extension with at least the "EasyList US" filter subscription would probably help. I does block a lot of unnecessary Script files whose sole purpose is to provide advertising. You can of course add additional filter subscriptions or filters of your own.
There are many extensions that can cause such problems, and you may have to go through your extensions.
One thing you might do is eliminate Problematic Extensions that you are not using, but mainly check to see how the create problems and you may have to make a choice between extensions. The Unresponsive Script Warning page lists some extensions with problems (thought it listed more) and describes how to check through your extensions to help find which extension is the problem Sometimes the message will tell you.
* '''Problematic extensions''' - MozillaZine Knowledge Base http://kb.mozillazine.org/Problematic_extensions
* '''Unresponsive Script Warning''' - MozillaZine Knowledge Base http://kb.mozillazine.org/Unresponsive_Script_Warning
* Firefox hangs - MozillaZine Knowledge Base http://kb.mozillazine.org/Firefox_hangs
Here are some extensions I had a problem with, and don't use them any more
: http://dmcritchie.mvps.org/firefox/infolister_listing_fx4.htm#scriptbusy
* Line Marker, Firefox 1.0 - 1.5.0.* ALL (2.0.2006072201)
* Quick Sum (0.1), presumably good for Firefox 2.0
* Translate (0.6.0.9), Firefox 0.9 - 1.5.0.* ALL
* gTranslate (0.3.1) [30KB], Firefox 1.0 - 2.0.0.* ALL
 Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it, but take your time and try to make sure you pick the answer that helped you, and tell us which extension or script you found to be the problem.

Anyone else has this problem - Airport extreme setup

I got my new Airport Extreme 802.11n and took out my linksys router and plug in the extreme. Using my Imac, I ran airport utility and it sees my airport but just hangs at "reading base station configuration" and never lets me set up my airport. Tried hard reset, and turn down the whole network and restarted it and still does not let me get past that screen..
Imac duo core 2 Mac OS X (10.4.8)

I'm not sure this helps, but...
Are you using the new "AirPort Utility" app that comes with the 802.11n base station or the older, now defunct "AirPort Setup Assistant" or "AirPort Admin Utility"?
I tried the "AirPort Admin Utility" and it hangs on giving me a dialog box reporting that "This version of AirPort Admin Utility does not support this base station. ... <Continue>"
I get no response if I click the Continue button.
I can use cmd-Q to quit though.
Other than that, nope I don't have trouble connecting with the newer AirPort Utility over either wired or wireless connection to it. It's "Version 5.0 (500.50)" by the way.

10.3 clean install hangs on "Base System Part 2"

I just recently acquired a Power Macintosh G3 B&W revision 2 with a 400MHz PPC G3, pretty much bone stock except that I've upped the RAM to 448MB using some old pulls that I had lying around from previous iMac upgrades. The factory 8.6 install recognized the RAM, so I went ahead and ran the latest firmware updater from Apple. The updater said I was already running the latest firmware, so I proceeded with wiping the HD and preparing to install 10.3 from the retail install discs. I can repartition and erase the HD, choose that HD as the installation drive, and customize the install in order to remove things that I won't be needing/using like additional language translations and Internet Explorer. The installer hangs though almost immediately; it makes it through preparing "Base System Part 1" but hangs as soon as it begins preparing "Base System Part 2". I thought perhaps that the HD was in bad shape since it is 10 years old, so I pulled that drive and installed an extra 40GB Maxtor that I had lying around (I also have an extra 10GB WD if all else fails) with the exact same results. Everything seems to work fine except for the installer hanging. I was able to get a partially functional 9.1 install using my iBook's backup disc (which amazed me greatly considering that it shouldn't have worked at all), but seeing as how that disc was made for the iBook, the install is lacking quite a bit of functionality (can't update to 9.2 and then 9.2.2 for example); besides, I'd rather have OS X anyway. My long term goal is to install 10.3 and then update to 10.4 and eventually 10.4.11 (I have a lot of other hardware upgrades in mind, but I can't start in on those until I have the system booting into 10.3 first / not about to spend money until I have a working system ;] ).
I've tried to be as specific as possible, but if I need to clarify anything, please let me know. As my details state, I also have an iBook FW SE happily running 10.4.11 and a MacBook White with the latest and greatest. I'm not very technically inclined, but I can handle even the most difficult of upgrades (that HD in my iBook was NOT easy to get to, but it sure was fun!). Any help is better than where I am right now. I'd really like to install directly onto the machine, but I do have the necessary hardware to install from my iBook to an external HD and then relocate that drive to the B&W.
Message was edited by: SundanceCody

Actually, this is in fact the revision 2 system with the "402" chip, which is why I was very excited to end up with this machine. From what I've been able to gather since this B&W found its new home with me, the whole B&W line was kind of flaky all around (with the non-402s being even more flaky).
- Update - I used an external firewire enclosure to install 10.3 on the original 6GB drive courtesy of my iBook FW SE. I swapped the 6GB drive back in and removed the 40GB that I had been testing in there, so the system is stock except for the RAM, which I may try reducing to Panther's minimum tomorrow just to remove all variables. I get the Apple logo on the screen, but it immediately changes to the "circle with a line through it"; almost makes me think it's a firmware problem, but the updater indicated that the firmware was already up to date. I may also try to get 9.1 back on there again tomorrow and just double check the firmware again.
Incidentally, is there an easy way of figuring out what firmware version the system is currently running without having an OS installed? I know on the iBook you can hold down [command]-[option]-[O]-[F] to get into open firmware, but I haven't tried it on this machine yet, nor do I know how to check the version number from there. I may end up putting in separate IDE card in the end, but I would much rather use the onboard; it would save a few bucks in the end, and for my purposes the performance penalty won't make much difference (i'm mostly setting it up as a backup computer right now for basic web-browsing and whatnot / nothing fancy right now, just the basics).
Now after re-reading your post though, it occurs to me that I don't have a solid three-drive shelf :P. I have two plates (one toward the front of the system and one in the middle) meant to hold SCSI drives, and one two-drive bracket toward the rear of the machine designed to hold either a SCSI drive or up to two IDE drives (although the upper portion is a little too wide to actually mount an IDE drive appropriately). It does have the IDE controller chip marked as "402" and a manufacture date in LATE 1999. What gets me is that it hangs on the Panther install while running stock and won't boot into Panther even after it has been forced onto the stock hard drive.
You do have me thinking though, which is certainly the first step to figuring it out. If I do end up having to put in a separate IDE controller, can the B&W boot from that? Probably a silly question I know, but from what I understand, it can't boot from a hard disk on it's secondary controller although it can boot from the optical drive there :P, which indicates to me a VERY finicky computer. lol

Airport Base Station Agent in Windows 7 Hangs when mouting Time Capsule

Hey all, can't figure this one out.
The airport base station agent launches at start up and asks if I'd like to ignore or connect with password. When I choose connect with password the agent hangs, and either goes unresponsive or puts up a dialogue box saying "Could not connect to the disk. Make sure NetBios is enabled and try again (53)." Ususally it just goes unresponsive and I have to close it out. I did briefly have access for a coupple days mapped as "Z" and did a windows back up to it and saw it in "my computer" as drive "Z"
The airport utility itself sees and connects with the time capsule no problem to edit it's settings and so forth. The agent it seems which tries to mount the disk and map the drive with a letter seems to be failing or being blocked somehow. Antivurus software has been removed, the windows firewall ports are open both public and private for the agent AND the utility. NetBios is currently set back to "default" as changing it to "enabled" had no effect.
Thanks for any help YO!

After setting this thing up as a disk only basically by going through the set up process, at the end, there is a dialogue box that says the time doesn't have a valid IP address. In the input field "router address", I entered 10.0.1.1 and updated settings. The status light stopped flashing amber and turned green and now windows 7 explorer can see it and access it with no problems.

Sybase - dba planning calender backup scheduling hangs....basis 740

Dear All,
We are using ERP6 EHP7 on sybase and we are facing an issue for scheduling a daily backup.
When I am trying to schedule a backup via "schedule an action" from dba_cockpit its getting hanged. And it has taken now more than 1 hr.
Even I have implemented the dba_cockpit correction note for 740...but nothing works.. 001882376
is there any one who can help me on this..??
Regards,
Letz..

Hi Deepak,
Thanks 4 the quick reply when i am clicking on DBA Planning Calender and after selecting the job when i clicked on Action Details it is showing only this as per screen below
Is there any further option apart from this...
Please Excuse me for the silly question as i am new in SAP Basis...
Thanks & Regards,
Prasad Deshpande

Database got hang after connection between appserver & data base went down

When the connection between appserver and data base is losed, one of the EXE's which calls oracle database procedures got hung for more that 12 hours.
Is this related to sqlnet timeout parameters or something to do with the code ??
can anyone help me solve this ?

Lets back up a few kilometers.
UNIX is not an operating system. Linux 5 Update 1 is an operating system.
10g is not a database version it is a marketing label. 10.2.0.3 is a version number.
What does any (still unknown) executable have to do with anything?
The listener does not work the way ita appears you think it does ... read the concepts docs (http://tahiti.oracle.com). Once a connection is made the listener is irrelevant.
What to do ... what to do ... find someone in your organization that can describe what is actually going on here because it is obvious, no insult intended, that you do not and thus can not provide sufficient information for someone to help you.
If you don't have anyone more senior in your organization you should hire a consultant.

Hanging TV in Basement

Similar Messages

Maybe you are looking for