Hanging up, window somtimes minimuses, not rsponding. read your suppose page don't work I have Windows 7 Strarter. instruction must me different to find and clear profile. HELP!!!!! HELP!!!!!!!!!
Firefox is not responding hanging up, at times the window will minimize. I searched your support pages. Says clear or rename or delete profile. instructions must be different for windows 7 starter, cause , an can get there. No profile, no run button, no click ok, nothing!!!! I am tied of searching. I also have been clicking for weeks on your sites that I have this problem and no responds or help like others have posted on that site. I need help to fix this, I have tired to followed your instruction, but this is not windows xp, it is WINDOWS 7 STARTER!!!! They are different!!!!!!!
Firefox is not responding hanging up, at times the window will minimize. I searched your support pages. Says clear or rename or delete profile. instructions must be different for windows 7 starter, cause , an can get there. No profile, no run button, no click ok, nothing!!!! I am tied of searching. I also have been clicking for weeks on your sites that I have this problem and no responds or help like others have posted on that site. I need help to fix this, I have tired to followed your instruction, but this is not windows xp, it is WINDOWS 7 STARTER!!!! They are different!!!!!!!
Similar Messages
-
New laptop with Windows 8 does not recognize my Playbook. I had it working before on Windows 7.
I have had my Playbook connected in the past and was able to transfer files with the WIFi switched off. On my new laptop with Windows 8 there is no recognition in "Computer" and Blackberry Desktop Software shows no connection.
Is this a Windows 8 problem?See:
http://support.apple.com/kb/TS3716
If you need further help, post in the iPod Nano forum. This is the iPod touch forum. They use different drivers. -
Adobe Reader does not print more than 5 pages Toshiba E-Studio 232 in Windows 7
Adobe Reader does not print more than 5 pages Toshiba E-Studio 232 in Windows 7.
I contacted Microsoft representatives said the problem is the Acrobat Reader once all other applications print without problems.
Please help me!We have the same problem with our TOSHIBA e-STUDIO6540C. We've tried different versions of adobe reader, even acrobat and many times it will only print some pages of any given document. Did you find a solution? To me it sounds like a toshiba issue but just wondering.
-
You can’t open the application “MFI_Simulator.exe” because Microsoft Windows applications are not supported on OS X. Can someone assist. I have Office 2011 on my MacBook Pro, OS X, 10.9.1.
Your Office 2011, though a Microsoft product, is designed to work with OSX the Mac operating system. Any program/application ending .exe is an executable program for Windows. It will only work in Windows and is not part of or openable with Microsoft Office.
the application you want to open needs Windows - you have a couple of alternatives:
Open it on a Windows PC
Install a valid version of Windows via Bootcamp (or Parallels or VM Fusion) which will allow you to boot your Mac into Windows where it will function like a Windows PC and you can use it to run the application.
See if the manufacturers of MFI_Simulator have a Mac version available.
Please note that if you follow the second option, then you will need to purchase a copy of Windows (if you do not have one already). BootCamp is free (part of OSX) but Parallels and VM Fusion cost too. I see quite a few posts from people who buy Parallels and try to run the program under Parallels - this doesn't work - you need to install Windows as well.
Hope this helps. -
Hi,
I was following the artigle (http://www.messageops.com/resources/office-365-documentation/ad-fs-with-office-365-step-by-step-guide/) but
when try to install the 'Office 365 PowerShell Module' shows a msg saying that 'windows azure active directory module for windows powershell is not supported by your version'.
And according to the blog (http://blogs.office.com/2014/04/15/synchronizing-your-directory-with-office-365-is-easy/) "DirSync can be
installed on an existing domain controller"
>>>> Any help is appreciated.
* Similar issue: http://www.adaxes.com/forum/post7398.htmlOk Vasil tks for reply, but this server is 64x. I dont get the point.
Microsoft Windows [Version 6.0.6002]
C:\Users\Administrator>set
ALLUSERSPROFILE=C:\ProgramData
APPDATA=C:\Users\Administrator\AppData\Roaming
CLIENTNAME=ANJOTEC_NOTE01
CommonProgramFiles=C:\Program Files\Common Files
CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files
COMPUTERNAME=COMPANYBR-SERVER
ComSpec=C:\Windows\system32\cmd.exe
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Users\Administrator
lib=C:\Program Files\SQLXML 4.0\bin\
LOCALAPPDATA=C:\Users\Administrator\AppData\Local
LOGONSERVER=\\COMPANYBR-SERVER
NUMBER_OF_PROCESSORS=4
OS=Windows_NT
Path=C:\ProgramData\Oracle\Java\javapath;C:\Program Files\HP\NCU;C:\Windows\sys
em32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\
1.0\;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn\;C:\Program File
(x86)\Microsoft SQL Server\80\Tools\Binn\;C:\Program Files\Microsoft SQL Serve
\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program F
les (x86)\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files (x86)\Microsoft SQ
Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft Vis
al Studio 8\Common7\IDE\PrivateAssemblies\;C:\Program Files (x86)\ExchangeMapi\
C:\Program Files (x86)\Common Files\Roxio Shared\DLLShared\;C:\Program Files (x
6)\Common Files\Roxio Shared\DLLShared\;C:\Program Files (x86)\Common Files\Rox
o Shared\9.0\DLLShared\;C:\Program Files\Microsoft\Exchange Server\bin;C:\Progr
m Files\Microsoft\Exchange Server\Scripts
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
PROCESSOR_ARCHITECTURE=AMD64
PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 30 Stepping 5, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=1e05
ProgramData=C:\ProgramData
ProgramFiles=C:\Program Files
ProgramFiles(x86)=C:\Program Files (x86)
PROMPT=$P$G
PSModulePath=C:\Windows\system32\WindowsPowerShell\v1.0\Modules\
PUBLIC=C:\Users\Public
RoxioCentral=C:\Program Files (x86)\Common Files\Roxio Shared\9.0\Roxio Central
3\
SESSIONNAME=RDP-Tcp#0
SystemDrive=C:
SystemRoot=C:\Windows
TEMP=C:\Users\Administrator\AppData\Local\Temp\2
TMP=C:\Users\Administrator\AppData\Local\Temp\2
USERDNSDOMAIN=COMPANYBR.LOCAL
USERDOMAIN=COMPANYBR
USERNAME=administrator
USERPROFILE=C:\Users\Administrator
windir=C:\Windows
C:\Users\Administrator> -
when I start firefox, i get this message ( The instruction at "0x7b9c77a9" referenced memory at "0x7b9c77a9". The memory could not be "read" ) hs anyone any idea why? I have scanned with AVG and something simply called 'Trojan Remover' and they both find nothing.... any advice would be greatly welcomed.. thanks
== This happened ==
Every time Firefox opened
== this morning 22/07/10Lyall,
I have seen this before, a long time ago (several years), and I cannot
remember how/if we resolved it.
If this is an impotant issue to you, I suggest that you open a case with
BEA support.
Regards,
Peter.
Got a Question? Ask BEA at http://askbea.bea.com
The views expressed in this posting are solely those of the author, and BEA
Systems, Inc. does not endorse any of these views.
BEA Systems, Inc. is not responsible for the accuracy or completeness of
the
information provided
and assumes no duty to correct, expand upon, delete or update any of the
information contained in this posting.
Lyall Pearce wrote:
The title says it all really.
I see other posts getting replies.
This is a rather important issue, I have seen another post with a similar problem.
While not being a show-stopper it certainly raises concerns.
The application works ok until the application exits (in both development and
executable form)
Apparently this did not happen with Tux 7.1
It does with 8, I do not have 7.1 so I have no workaround.
..Lyall -
Finder Window - command 1, 2, 3 or 4 key sequences don't work
Help with this one would be greatly apprecieated. In a finder window, command 1, 2, 3 or 4 key sequences don't work. In fact, command 2 sleeps the computer instead of displaying the icons in List View
Please helpGot it!
It's not Command-1 but Command-Alt-1, etc.
Did it change recently? I don't know... -
Ok look these solutions are super complicated and I tried all of them and they don't work I just wanna buy a song ok just one song and it won't let me cause I don't have my questions and a answer from a robot is not going to help me so a real person plz
There are no robots here. Everyone here is a "real person", a user just like you. How about telling us what the problem is that you are experiencing when you try to buy a song? If you mean that you have forgotten your security questions, go to:
https://appleid.apple.com/
Click "Manage My Account", sign in, and go to the Password and Security section. If you've forgotten your answers, there should be a link just under the security questions fields where you can have a reset email sent to your Rescue email address. If the link for the email doesn't appear, as can happen if you didn't set a rescue email address or (apparently) have a .Mac email address, see the user tip created by Kappy, another user here, on how to proceed:
https://discussions.apple.com/docs/DOC-4551
Regards. -
complete my album downloads the missing tracks but then does not place it with the existing tracks in iTunes. i have a single song bought sat on its own and an album with a track missing, any ideas?
I had this same problem and started a thread, but for the most part nobody responded and those who did somehow didn't understand what the problem was.
http://discussions.apple.com/message.jspa?messageID=11504935#11504935
I'm sure the problem is sweat getting into the apple supplied headphone "remote." Basically even the smallest drop can slide down the wire and get into the unit.
Unfortunately I haven't found a solution other than to get a Belkin remote adapter and some sport headphones. This doesn't give you voice over, but you can still control the volume, skip, etc.
I've been doing this for a couple weeks now and it hasn't had a freak out since. -
Anyone know how to reset my iphone vm password (so I can listen to my messages) while in Canada and not turning on cellular so I don't get charged for roaming? Verizon says its an iphone issue and Apple says to contact my carrier?! I don't want to pay for roaming and I am able to use my phone fine and also connect to wifi while at friend's houses etc.
It's not a Verizon reset - under General and phone there is a place to reset my password however I can't do it without cellular turned on.
-
My Ipod touch 8gb will not turn back on no matter what i do i have tried just the power button, the power button and home button, and connecting it to the computer and the battery wasn't close to being dead non of them work what do i do?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
conclusion from godaddy:
Search engines are not pulling up your other pages on your website because it is created with javascript.
the content on the pages, (photo gallery, My Recipes/Blog, History, Friends) need to be formatted to HTML, PHP or CSS. No search engines (google, Yahoo, Bing) can crawl//analyze webpages built with javascript.
See if Apple allows iweb to create the pages in HTML format and ask how to make those changes.
I spend more then 1 hour on the phone with them but we didn't find the solution...
please i need help because like this nobody can rich my website...
www.chefdiego.com
thank youThe part of iWeb pages that give the search engines problem is the navbar. That's javascript based. One way to get around that is to create another blank page in the site that's not included in the navbar.
Add a text based navbar in that page with just the other pages in the site.
Also you can use that page for creating the sitemap for Google at Create your Google Sitemap Online - XML Sitemaps Generator.
Have you let Google know your site exists? This website describes how to get it recognized: Get your iWeb website found in search engines like Google Yahoo MSN and Bing.
OT -
Installed Windows 7 on bootcamp but now my wireless mouse won't work when in windows. What can I do?
Installed Windows 7 on bootcamp but now my wireless mouse won't work when in windows. What can I do?
assuming it is an optical mouse (no ball etc.) then there aren't any moving parts involve in the motion detection
so there's a faulty component or connection
from what you describe it could be just a loose/broken connection, so if you know someone familiar with electronics see if they can open it up and have a look -
I am working on a Mac 10.9.5 with Adobe CS6. My files are locally in Dropbox but once we moved files to network and tried opening the AI - the file would not recognize the original folder location. I tried ignoring the missing images but then I receive the error - The file could not be read due to an error." The same error happens when I try replacing the first missing image. I know the problem lies in the images are linked back to my Dropbox but the AI file doesn't care since it won't let me replace or ignore the image links.
Jasion,
Maybe a bit beside the question, but it is always recommended here to open/save from/to own hard disk, and to copy from/to networks and removable media. You may be lucky, at least for a while, but it is better to be safe than sorry.
In addition to the (far greater) risk of file corruption, some issues are mentioned here:
http://helpx.adobe.com/illustrator/kb/illustrator-support-networks-removable-media.html -
I tried to download itunes to my phone.First it wanted it to download the new itunes.We also updated our Windows xp.I kept coming up can't complete because there was an error when setting up.One time is was error 9 and they tried to help me.I have a laptop with the internet and we tried it there.We were able to get service pack 3 downloaded.So we did upgrade the itunes on the laptop even though I have never put music on there but there is some from someone .I never heard of many of the songs.Any how I did try to download and restore on the laptop and then come to the land computer and see if the box comes up to restore the contacts.Well it didn 't work and now my phone won't even turn on .I have no one to call if something happened to me.I am going to the Apple store right off the bat tomorrow morning.I have everything in the box and the phone and reciept and see if they make it work or give me another one.I have to take my sim card again since They gave it back to me.I bet it means I can't sync the photos in the phone.Even with 2 computers and talking with 3 people it still did not work.All because I wanted to download the itunes to my phone.I don't care now if I can just get my phone to work and my contacts are in there.I hope I don't have to buy the ringtones again I bought 4 of them.Any one have this problem and what did you do to fix it?
The Apple rep tried both those ideas and both failed. The rep was connected to my computer so she
could see my screen and show me exactly what to do. My iPhone (not ipad) never has synced photos to my computer,
I have to use explorer to copy and paste or cut and paste them to my PC . It is the syncing back to my iPhone of only the much smaller selected photos that used to sync in itunes but now the itunes sync button cannot be clicked to make that happen. And the reason I only sync back selected photos is that my total PC pictures file is about 40 Gb. Also I find it a lot more useful to have a small number of folders ( no sub-folders of course) so I can quickly locate on my iPhone pictures from different categories such as family, autos, etc. None of this posed any problems for over a year until just recently. I am reading on other threads of many people with other iTunes syncing problems, and wonder now if it is the latest iTunes updates that are causing the problems? While I have tried removing and reinstalling iTunes on my PC, I don't know how or if you can, install a previous version?
Maybe you are looking for
-
I have downloaded a trail version of adobe acrobat pro and when I try to use it, it says that it cannot be edited in acrobat, please use adobe livecycle designer to edit this form. I can't work out what I need to do?
-
My iPad is frozen with iTunes logo, arrow pointing to it, lock symbol and image of bar running to power inlet point. How do I get out of this?
-
Auto PO indicator in the material master
Hi there, How can we activate PO indicator in the material master? Pls guide, thank you.
-
AutoPatch error: Unable to find job when restart
OS is RHEL 5.7, and Oracle ebs R12.1.1 installed with patch applied 6078836, 11072566, 8576725... Problem summary: AutoPatch error:Unable to find job when restarting, and FND_INSTALL_PROCESSES table does not exist In the NLS patch update with 4 merge
-
When I click on the dreamweaver.exe file in programs->Adobe-> dreamweaver cs3, it says: quote: "you cannot use the product at this time. You must repair the problem by uninstalling then reinstalling this product or by contacting your IT administrator