Hangs and freezes with low CPU and RAM load.
I have a Macbook Pro (13 inch mid 2012) and I have an issue with slow responses and hangs, especially when using Finder. I have done all of the software troubleshooting that I can think of including Disk Utility (verify and fix permissions, verify and repair disk). I’ve tried safe boot and AHT. All returned a healthy result, but the hangs still continued. The CPU load is less than 5% during these hangs and the RAM pressure is low. There is 100+ GBs of free space on the Hard Drive.
I used Time Machine to backup my data and I went to the Genius Bar. The representative concluded that it was a bad Hard Drive despite the results from the before mention Disk Utility. I thanked him and decided to install a new 840 EVO SSD myself.
I booted using the External Hard Drive that contained my Time Machine backup. I formatted and partitioned the SSD using GUID and Extended Journal. I selected to restore the Time Machine backup, but it failed. I do not remember the details of the restore failure since it occurred at 2 a.m. Frustrated, I decided to do a fresh install of Mavericks and restore my data using Migration Assistant at a later date.
Now I have a new SSD and a freshly installed OS and the problem is the same. What else could be the cause of these hangs and beach balls? A faulty SATA cord? Faulty Logic Board?
Thank you for your time.
If the only thing that you have installed on the SSD is the OSX and NOTHING else, then that indicates a hardware problem. Run the Apple Hardware Test, twice if you have the patience - the extended version. Note an error free AHT is not definitive.
Reset the SMC and the NVRAM:
http://support.apple.com/en-us/HT201295
http://support.apple.com/en-us/HT204063
As a matter of procedure I also would boot into the recovery partition and run Disk Utility>First Aid, Verify, Repair and Permissions.
If there is no change, then another appointment at an Apple store genius bar will have to be scheduled.
I know that much if this is what you have already done, but the point here is to clearly eliminate as many possibilities before a genius bar appointment so that they can focus on other potential problem areas.
I am assuming this is a consistent and constant situation that will be repeated at an Apple store. If it is intermittent, that can be most difficult to diagnose.
Ciao.
Similar Messages
-
Hi there, I'm trying to reopen a job on FCPX and seems to be hanging and not loading. Can someone please help
This seems to happen often
AlfI dragged Event Renders to trash and renamed event files using back up files
2 events work however the remaining 5, still does not allow me to load project. so at this stage the only way I can open project completely is with 2 events which means half project is offline. is there an easy way to manually add the events/footage so I can relink the missing files on the timeline? -
Beachballing and extreme GUI latency with low CPU usage
I generally only have two applications open. iTunes 11 playing MP3s of about 128kbps, and latest Google Chrome with up to 4-5 tabs. Usually I have gmail open, Facebook, and maybe 1-2 sites such as YouTube or Slashdot. I don't have any servers running.
The CPU load is usually 90% idle. The system load hovers around 1.5 for some reason. Though at times it jumps up to 3.5 even though CPU remains at 90% idle. I read a ton of Facebook pages. After about 30-40 page loads, Chrome stops letting me scroll. I can still click in the address bar, so I know the whole system isn't frozen. I can change tasks via ALT-TAB, however, when I do that, it takes 10 seconds for it to switch to Terminal. When Termianl is finally shown, it jumps to 90% CPU for a few seconds, and updates 5 times in a row, quickly, like a stuttering video, and then it is normal. If I activate Expose by moving the mouse to the bottom left corner, it shows the Dock right away, but then it just sits there frozen for 15 seconds, and then it shows the windows and whatnot. If I switch to the Finder and click on an icon, it doesn't do anything. I then click on another icon. Nothing. I then try to draw a bounding square on the empty desktop. Nothing. Then after about 30 seconds of being frozen, the system does EVERYTHING I did in a quick hurry. It selects the first icon, the second, draws a square, selects another icon.. etc. It seems to be queueing all my actions but not responding to them immediately. If I try to delete a file, the beachball shows up, and then after about 30 seconds it shows a progress bar, even for a tiny little text file, the progress bar takes 5 seconds, and then it removes it from the desktop. If I press Mac-T to open a new tab in Chrome, I get a beachball and it takes up to a full minute before the new tab shows up!
While all of this is happening I've been monitoring my system with top, the CPU keeps at 90% idle! And the load is usually below 2.0! I have a Core 2 Duo 2.1 gHz MacBook 13" with 2GB of RAM, and there's about 25 GB free on the main disk. There is also an external firewire drive connected. Every 5 minutes the Mac OS wakes up the drive from sleep even though I'm not using it, and while the drive is starting up the whole system freezes for 5-10 seconds again!!
What the **** kinda joke of an operating system is this?!?!!? I thought Macs were multitasking and everything! I'm seriously concerned.... I"ve never had these problems in Windows, and never had these problems in Linux. ***?!!!?! I can't use more than 5 tabs in Chrome either. It's way too slow. And most videos on YouTube I can't watch unless I lower to 340p or 240p, otherwise they freeze and stuff. Even though I have enough bandwdith.. The system can't handle the video. It's so frustrating. Oh and one more thing. While scrolling through pages on Facebook, iTunes pauses at random points as if it can't handle the scrolling.... ***??!?!?!
Please help me!!!Hello? Does anyone from Adobe know why this is happening?
I understand why frames would be dropped if you set high
quality and your CPU can't encode in real time however the 30% cpu
usage I am getting while encoding isn't indicating to me I have a
cpu issue.
Also as a note when I change the quality settings at no point
can I get my CPU to actually get busy enough where I think frames
should be dropping.
Another side question. Is FME mult-threaded? We all know dual
cores are popular now. Also when I say 30% if its a single threaded
app, that would mean 100% = 2 cores, 50% = 1 core, so 30% of of
that 100% would be all on one core if its a single threaded
application.
This would mean perhaps the utilization is higher than
expected and frames are dropping perhaps.
Any insight would be great.
Thanks and take care. -
HP Pavilion dv4t-1300 fan is always on even with low CPU
I have a HP Pavilion dv4t-1300 Entertainment PC with Windows 7. Even with a low CPU (around 20%), my laptop fan is always on, and the noise is annoying. Why is it always on? How do I turn it off (I have a separate laptop cooler)?
There's a free programme called speedfan to moniter temps, my fan runs all the time its normal it runs at 30% unless cpu and things get to high temps, you can turn off the fan in the bios but i wouldn't recommend it.
-
Slow slow slow...even with low CPU and memory usage.
Sometimes my Mac gets really slow, especially with applications, and even more especially when opening applications. What I don't understand is that when I check Activity Monitor during slow times, it shows plenty of CPU and memory still free, far from being maxed out. I try to keep a good chunk of my hard drive available for virtual memory too, so I'm unsure where its getting bogged down.
Any ideas?You may just need a little maintenance:
Kappy's Personal Suggestions for OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. TechTool Pro provides additional repair options including file repair and recovery, system diagnostics, and disk defragmentation. TechTool Pro 4.5.1 or higher are Intel Mac compatible; Drive Genius is similar to TechTool Pro in terms of the various repair services provided. Versions 1.5.1 or later are Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts had been significantly reduced in Tiger and Leopard. These utilities have limited or no functionality with Snow Leopard and should not be installed.
OS X automatically defrags files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems.
I would also recommend downloading the shareware utility TinkerTool System that you can use for periodic maintenance such as removing old logfiles and archives, clearing caches, etc. Other utilities are also available such as Onyx, Leopard or Snow Leopard Cache Cleaner, CockTail, and Xupport, for example.
For emergency repairs install the freeware utility Applejack (not compatible with Snow Leopard.) If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the commandline. Note that AppleJack 1.5 is required for Leopard. AppleJack is not compatible with Snow Leopard.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Retrospect Desktop (Commercial - not yet universal binary)
2. Synchronize! Pro X (Commercial)
3. Synk (Backup, Standard, or Pro)
4. Deja Vu (Shareware)
5. Carbon Copy Cloner (Donationware)
6. SuperDuper! (Commercial)
7. Intego Personal Backup (Commercial)
8. Data Backup (Commercial)
9. SilverKeeper 2.0 (Freeware)
10. MimMac (Commercial)
11. Tri-Backup (Commercial)
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac Maintenance Quick Assist.
Referenced software can be found at www.versiontracker.com and www.macupdate.com. -
HELP: WL 8.1 run unexpectedly slow on solaris 9 with low CPU utilization
Hi All
I have setup my app to run on WL8.1 + solaris 9 env + SUN mid-end series server.
JVM was configured to use 3G RAM and there are still abundant RAM on the HW server.
I tried out a use case, it took long time to get response (~ 2 minutes). But the
CPU utilization has been always lower 20%. I have tried out the same test case
on a wintel server with 500 RAM allocated to JVM, the response time is much quicker
(less than 30 sec). I did the same on solaris 8 with 3G RAM and had used alternate
threads library mode (changing LD_LIBRARY_PATH to include /usr/lib/lwp) which
is the default mode adopted by solaris 9. The same use case responded much quicker
and comparable to abovementioned test on wintel. Can anybody advice on how to
tune WL 8.1 on solaris 9 so as to make it perform best ? Is there any special
trick ?
thank u very much for any advice in advance
dso"Arjan Kramer" <[email protected]> wrote:
>
Hi dso,
I'm running the same two configs and run into the same performance issues
as you do. Please let me know if you any response on this!
Regards,
Arjan Kramer
"dso" <[email protected]> wrote:
Hi All
I have setup my app to run on WL8.1 + solaris 9 env. JVM was configured
to use
3G RAM and there are still abundant RAM on the HW server. I tried out
a use case,
it took long time to get response (~ 2 minutes). But the CPU utilization
has been
always lower 20%. I have tried out the same test case on a wintel server
with
500 RAM allocated to JVM, the response time is much quicker (less than
30 sec).
I did the same on solaris 8 with 3G RAM and had used alternate threads
library
mode (changing LD_LIBRARY_PATH to include /usr/lib/lwp) which is the
default mode
adopted by solaris 9. The same use case responded much quicker and comparable
to abovementioned test on wintel. Can anybody advice on how to tuneWL
8.1 on
solaris 9 so as to make it perform best ? Is there any special trick
thank u very much for any advice in advance
dso
There could be many factors that add to performance degradation, database, OS,
Network, app config etc, so without knowing too much its difficult to tell.
Can you please supply the startup JAVA options used to set the heap etc. Having
larger heao sizes is not always the best approach of building HA applications...the
bigger they are, the bigger they fall. I'd suggest using many but smaller instances.
Provide the heap info from NT also.
BTW, when weblogic starts, can you tell me how much memory is being used in the
console...ie the footprint of weblogic + your application.
Many Thanks -
Hanging and non loading web pages but random
Hi New to this so please excuse me if it doesn't make complete sense! We have been on BT infinity since Oct 2011 but we have been experiencing problems with access to certain web pages the pages either do not load or it just hangs, this has now been going on for about 6 weeks but it has now got a lot worse, we have had a friendly IT specialist look at our computer and he is now of the opinion that the problem lies with either the BT line or router, please see below what we/friendly IT specialist have done and please advise if our next step is to speak with BT?
Thanks Mick
Issue
Vista Client Service Pack 2 laptop slow Internet performance failure to access some web pages.
Known Troubleshooting Approach
**** One or more combined of these operations would normally resolve in most cases ****
Initially checked over system settings and allowed pending windows systems updates and other updates.
Removed Trusteer Rapport software (known issues with slow performance)
Updated JAVA & Full re-install of Adobe Flash Player (components required for website animations\operations)
(Note : Adobe Flash Component was not registered)
Cleared Internet temp files (delete of web files\history\cookies etc)
Reset of Internet Explorer settings (to address instability issues with Internet Explorer)
Microsoft Security Essentials (Combined Anti Virus & Anti Malware Software)
Quick scan (15 mins usually scans core components) -all clear
Full scan (left to run approx 2 hrs) usually not necessary - all clear
Reset of router & restarts of router (homehub) over time
(which included off for more than 15 mins)
Power off of BT wall device (additional equipment involved with BT set up) and router at same time
Laptop still slow hard wired to router (as in Ethernet cable from laptop to port on homehub)
Checked for clean uninstall of Trusteer Rapport software
(Checked registry which is heart of operating system settings for traces of Trusteer)
Actually downloaded Trusteer Uninstall ulitility to ensure clean uninstall
Install of Google Chrome (alternative Internet browser still did not work)
Uninstall of Google Chrome
Uninstall of Internet Explorer 9
Uninstall of Google Desktop
Uninstall of Mozilla Firefox (alternative browser)
Also confirmed other laptops (Windows7) & Netbooks experience the same problemsHi quinnm5, myself and another poster had replied to your previous thread about the same issue here: http://community.bt.com/t5/BT-Infinity/Broadband-connection-issues/m-p/495109
If you want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side If the the reply answers your question then please mark as ’Mark as Accepted Solution -
Everytime I go to export a photo, I get an error.
"Export Results: Not enough memory (1)
Using Windows 7 32-bit. Intel i5 4690K CPU 16GB RAM 120 SSD and 1 TB harddrive.Even though you have 16gb of ram installed, 32 bit Windows can only use 4gb of it so 12gb is wasted. This is the reason you are getting not enough memory errors and is a known problem with Lightroom an 32 bit Windows during export. You need to change to 64 bit Windows.
-
X freeze with NVRM: Xid 8 and 13 error, help.
My hardware: Nvidia Gtx 275, Core i7 920, ASUS P6T, OCZ Gold 6G ram.
I was using my Archlinux surfing the web, suddenly it become very slow and choppy, while the screen start looking funny. It doen't really hang, but freeze for a few second and come back, then freeze a few second again. I struggled to open top finding nothing is using the CPU, 0% uasage. Since it is not usable, I have to reboot.
Here is the message found from /var/log/error.log, after reoboot:
Oct 3 10:18:37 home kernel: NVRM: Xid (0002:00): 8, Channel 00000001
Oct 3 10:19:43 home kernel: NVRM: Xid (0002:00): 13, 0001 00000000 00008397 0000194c 00000000 00000100
Oct 3 10:19:43 home kernel: NVRM: Xid (0002:00): 13, 0001 00000000 00008397 0000194c 00000000 00000100
Oct 3 10:19:43 home kernel: NVRM: Xid (0002:00): 13, 0001 00000000 00008397 0000194c 00000000 00000100
Oct 3 10:19:49 home kernel: NVRM: Xid (0002:00): 13, 0001 00000000 00008397 0000194c 00000000 00000100
Oct 3 10:19:49 home kernel: NVRM: Xid (0002:00): 13, 0001 00000000 00008397 0000194c 00000000 00000100
Oct 3 10:19:49 home kernel: NVRM: Xid (0002:00): 13, 0001 00000000 0000502d 0000024c 0000000c 00000040
Oct 3 10:19:49 home kernel: NVRM: Xid (0002:00): 13, 0001 00000000 00008397 0000194c 00000000 00000100
I googled for a while, it seems it is a fairly comment problem before, but I could find any thing conclusive. Can any one shed some light for me?
Thanks.
Update: I am sure that it is not a temperature problem.
Last edited by mark.altern (2009-10-03 16:45:51)I've got a similar problem with an old Dell Optiplex equipped with an Intel 845G integrated video adapter. Stock Kernel 2.6.34-ARCH is installed, along with xorg-server 1.8.1-902-1, and xf86-intel-video 2.11.0-2.
However instead of flickering the screen, or freezing for a split second or two, my screen just locks up completely. It occurs randomly at any time using any program (even just an xterm), but most frequently after the computer has been on for about an hour or two. Subsequent attempts to start X just ends up leaving me with a black screen and a moveable mouse cursor. The only way I can get back into X at all is to reboot the computer.
Also oddly enough, this problem appears less often without any xorg.conf file than it does when I have even the most basic xorg.conf file.
Update: the latest intel video driver (xf86-video-intel 2.12.0) from upstream freedesktop.org sources limits the freeze up and gpu hang errors for me. The only time they crop up is in special instances of using sdl or other 3D related operations.
Last edited by carbonero (2010-07-07 00:32:52) -
XBMC freezes with free Radeon driver and VDPAU (Mesa 3D 9.2)
Hello!
I am currently setting up a HTPC with AMD A4-5300 with the integrated Radeon HD 7480D. To avoid the trouble with the fglrx driver, I would like to use the free xf86-video-ati driver.
I thought this would be no problem since the update to Mesa 3D 9.2 (Package version 9.2.0-1) yesterday. This should have brought support for the UVD in the GPU when at least kernel 3.10 is installed (3.10.9-1 is).
According to this Gentoo Wiki page, the Aruba GPU should use TAHITI_uvd.bin as the UVD firmware, the file exists in /usr/lib/firmware/radeon.
But now to the problems with XBMC (12.2-5). When I boot up the system, select a for example x264 encoded video file it plays fine most of the time. Low CPU load indicates that hardware decoding actually is used. When I then stop the video and simply select it again in the file list, XBMC freezes. Restarting works most of the time to workaround the problem, so after a reboot XBMC manages to play the video most of the time.
Sometimes it even freezes on the first attempt to start the movie. After just restarting X11, XBMC was never able to play a video file.
Here is a portion of the logfile where a film is played, then stopped and then selected again, causing a freeze:
19:14:30 T:139964276774656 NOTICE: Thread Background Loader start, auto delete: false
19:14:34 T:139965115230144 NOTICE: Previous line repeats 1 times.
19:14:34 T:139965115230144 NOTICE: DVDPlayer: Opening: smb://ANDI/xxx.mkv
19:14:34 T:139965115230144 WARNING: CDVDMessageQueue(player)::Put MSGQ_NOT_INITIALIZED
19:14:34 T:139964276774656 NOTICE: Thread CDVDPlayer start, auto delete: false
19:14:34 T:139964276774656 NOTICE: Creating InputStream
19:14:34 T:139964276774656 NOTICE: Creating Demuxer
19:14:35 T:139964276774656 NOTICE: Opening video stream: 0 source: 256
19:14:35 T:139964276774656 NOTICE: Creating video codec with codec id: 28
19:14:35 T:139964276774656 NOTICE: CDVDVideoCodecFFmpeg::Open() Creating VDPAU(1920x1080, 28)
19:14:35 T:139964276774656 NOTICE: vdp_device = 0x00000001 vdp_st = 0x00000000
19:14:35 T:139964276774656 NOTICE: VDPAU Decoder capabilities:
19:14:35 T:139964276774656 NOTICE: name level macbs width height
19:14:35 T:139964276774656 NOTICE: ------------------------------------
19:14:35 T:139964276774656 NOTICE: MPEG1 16 9216 2048 1152
19:14:35 T:139964276774656 NOTICE: MPEG2_SIMPLE 16 9216 2048 1152
19:14:35 T:139964276774656 NOTICE: MPEG2_MAIN 16 9216 2048 1152
19:14:35 T:139964276774656 NOTICE: H264_BASELINE 16 9216 2048 1152
19:14:35 T:139964276774656 NOTICE: H264_MAIN 16 9216 2048 1152
19:14:35 T:139964276774656 NOTICE: H264_HIGH 16 9216 2048 1152
19:14:35 T:139964276774656 NOTICE: VC1_SIMPLE 16 9216 2048 1152
19:14:35 T:139964276774656 NOTICE: VC1_MAIN 16 9216 2048 1152
19:14:35 T:139964276774656 NOTICE: VC1_ADVANCED 16 9216 2048 1152
19:14:35 T:139964276774656 NOTICE: MPEG4_PART2_ASP 16 9216 2048 1152
19:14:35 T:139964276774656 NOTICE: ------------------------------------
19:14:35 T:139964276774656 NOTICE: Mixer feature: VDP_VIDEO_MIXER_FEATURE_NOISE_REDUCTION
19:14:35 T:139964276774656 NOTICE: Mixer feature: VDP_VIDEO_MIXER_FEATURE_SHARPNESS
19:14:35 T:139964276774656 NOTICE: CDVDVideoCodecFFmpeg::Open() Using codec: H.264 / AVC / MPEG-4 AVC / MPEG-4 part 10 (VDPAU acceleration)
19:14:35 T:139964285167360 NOTICE: Thread CVideoReferenceClock start, auto delete: false
19:14:36 T:139964276774656 NOTICE: Creating video thread
19:14:36 T:139963235432192 NOTICE: Thread CDVDPlayerVideo start, auto delete: false
19:14:36 T:139964276774656 NOTICE: Opening audio stream: 1 source: 256
19:14:36 T:139964276774656 NOTICE: Finding audio codec for: 86020
19:14:36 T:139964276774656 NOTICE: Creating audio thread
19:14:36 T:139963235432192 NOTICE: running thread: video_thread
19:14:36 T:139963227039488 NOTICE: Thread CDVDPlayerAudio start, auto delete: false
19:14:36 T:139963227039488 NOTICE: running thread: CDVDPlayerAudio::Process()
19:14:36 T:139963227039488 NOTICE: Creating audio stream (codec id: 86020, channels: 6, sample rate: 48000, no pass-through)
19:14:36 T:139963235432192 NOTICE: (VDPAU) screenWidth:0 vidWidth:1920 surfaceWidth:1920
19:14:36 T:139963235432192 NOTICE: (VDPAU) screenHeight:0 vidHeight:1080 surfaceHeight:1088
19:14:36 T:139963235432192 NOTICE: Creating 1920x1080 pixmap
19:14:36 T:139963235432192 NOTICE: (VDPAU) Total Output Surfaces Available: 2 of a max (tmp: 2 const: 4)
19:14:36 T:139963235432192 NOTICE: (VDPAU) Creating the video mixer
19:14:36 T:139963235432192 NOTICE: fps: 23.976024, pwidth: 1920, pheight: 1080, dwidth: 1920, dheight: 1080
19:14:36 T:139963235432192 NOTICE: Display resolution ADJUST : HDMI-0: 1920x1080 @ 24.00Hz (21) (weight: 0.001)
19:14:36 T:139965115230144 NOTICE: CVDPAU::OnLostDevice event
19:14:36 T:139965115230144 NOTICE: (VDPAU) FiniVDPAUOutput
19:14:36 T:139965115230144 ERROR: GLX: Same window as before, refreshing context
19:14:36 T:139965115230144 NOTICE: Using GL_TEXTURE_2D
19:14:36 T:139965115230144 NOTICE: GL: Using VDPAU render method
19:14:36 T:139965115230144 NOTICE: GL: NPOT texture support detected
19:14:36 T:139965115230144 NOTICE: GL: Using GL_ARB_pixel_buffer_object
19:14:36 T:139965115230144 NOTICE: CVDPAU::OnResetDevice event
19:14:36 T:139963235432192 NOTICE: Attempting recovery
19:14:36 T:139963235432192 NOTICE: vdp_device = 0x00000001 vdp_st = 0x00000000
19:14:36 T:139963235432192 NOTICE: (VDPAU) screenWidth:1920 vidWidth:1920 surfaceWidth:1920
19:14:36 T:139963235432192 NOTICE: (VDPAU) screenHeight:1080 vidHeight:1080 surfaceHeight:1088
19:14:36 T:139963235432192 NOTICE: Creating 1920x1080 pixmap
19:14:36 T:139963235432192 NOTICE: (VDPAU) Total Output Surfaces Available: 2 of a max (tmp: 2 const: 4)
19:14:36 T:139963235432192 NOTICE: (VDPAU) Creating the video mixer
19:14:37 T:139965115230144 ERROR: CWinSystemX11::XErrorHandler: BadDrawable (invalid Pixmap or Window parameter), type:0, serial:12680, error_code:9, request_code:152 minor_code:8
19:14:57 T:139965115230144 NOTICE: CDVDPlayer::CloseFile()
19:14:57 T:139965115230144 NOTICE: DVDPlayer: waiting for threads to exit
19:14:57 T:139964276774656 NOTICE: CDVDPlayer::OnExit()
19:14:57 T:139964276774656 NOTICE: DVDPlayer: closing audio stream
19:14:57 T:139964276774656 NOTICE: Closing audio stream
19:14:57 T:139964276774656 NOTICE: Waiting for audio thread to exit
19:14:57 T:139963227039488 NOTICE: thread end: CDVDPlayerAudio::OnExit()
19:14:57 T:139964276774656 NOTICE: Closing audio device
19:14:57 T:139964276774656 NOTICE: Deleting audio codec
19:14:57 T:139964276774656 NOTICE: DVDPlayer: closing video stream
19:14:57 T:139964276774656 NOTICE: Closing video stream
19:14:57 T:139964276774656 NOTICE: waiting for video thread to exit
19:14:57 T:139963235432192 NOTICE: thread end: video_thread
19:14:57 T:139964276774656 NOTICE: deleting video codec
19:14:57 T:139964276774656 NOTICE: CDVDPlayer::OnExit() deleting demuxer
19:14:57 T:139964276774656 NOTICE: CDVDPlayer::OnExit() deleting input stream
19:14:57 T:139965115230144 NOTICE: DVDPlayer: finished waiting
19:14:57 T:139965115230144 NOTICE: (VDPAU) Close
19:14:57 T:139965115230144 NOTICE: (VDPAU) FiniVDPAUOutput
19:14:57 T:139965115230144 ERROR: GLX: Same window as before, refreshing context
19:14:58 T:139963387606784 NOTICE: Thread Background Loader start, auto delete: false
19:14:58 T:139965115230144 NOTICE: Previous line repeats 1 times.
19:14:58 T:139965115230144 NOTICE: CDVDPlayer::CloseFile()
19:14:58 T:139965115230144 WARNING: CDVDMessageQueue(player)::Put MSGQ_NOT_INITIALIZED
19:14:58 T:139965115230144 NOTICE: DVDPlayer: waiting for threads to exit
19:14:58 T:139965115230144 NOTICE: DVDPlayer: finished waiting
19:15:09 T:139965115230144 NOTICE: DVDPlayer: Opening: smb://ANDI/xxx.mkv
19:15:09 T:139965115230144 WARNING: CDVDMessageQueue(player)::Put MSGQ_NOT_INITIALIZED
19:15:09 T:139964285167360 NOTICE: Thread CDVDPlayer start, auto delete: false
19:15:09 T:139964285167360 NOTICE: Creating InputStream
19:15:10 T:139964285167360 NOTICE: Creating Demuxer
19:15:10 T:139964285167360 NOTICE: Opening video stream: 0 source: 256
19:15:10 T:139964285167360 NOTICE: Creating video codec with codec id: 28
19:15:10 T:139964285167360 NOTICE: CDVDVideoCodecFFmpeg::Open() Creating VDPAU(1920x1080, 28)
Here a debug log from a similar action (play, stop, play, crash)
19:21:23 T:139993780455360 NOTICE: DVDPlayer: Opening: smb://xxx.mkv
19:21:23 T:139993780455360 WARNING: CDVDMessageQueue(player)::Put MSGQ_NOT_INITIALIZED
19:21:23 T:139993780455360 DEBUG: CRenderManager::UpdateDisplayLatency - Latency set to 0 msec
19:21:23 T:139993780455360 DEBUG: LinuxRendererGL: Cleaning up GL resources
19:21:23 T:139993780455360 DEBUG: CLinuxRendererGL::PreInit - precision of luminance 16 is 16
19:21:23 T:139993780455360 DEBUG: SECTION:LoadDLL(special://xbmcbin/system/players/dvdplayer/avutil-51-x86_64-linux.so)
19:21:23 T:139993780455360 DEBUG: Loading: /usr/lib/xbmc/system/players/dvdplayer/avutil-51-x86_64-linux.so
19:21:23 T:139993780455360 DEBUG: SECTION:LoadDLL(special://xbmcbin/system/players/dvdplayer/swscale-2-x86_64-linux.so)
19:21:23 T:139993780455360 DEBUG: Loading: /usr/lib/xbmc/system/players/dvdplayer/swscale-2-x86_64-linux.so
19:21:23 T:139992949044992 NOTICE: Thread CDVDPlayer start, auto delete: false
19:21:23 T:139992949044992 NOTICE: Creating InputStream
19:21:23 T:139992949044992 DEBUG: CSmbFile::Open - opened xxx.mkv, fd=10001
19:21:23 T:139992949044992 DEBUG: ScanForExternalSubtitles: Searching for subtitles...
19:21:23 T:139992949044992 DEBUG: OpenDir - Using authentication url smb://ANDI/Filme
19:21:23 T:139993780455360 DEBUG: ------ Window Init (DialogBusy.xml) ------
19:21:24 T:139992949044992 DEBUG: ScanForExternalSubtitles: END (total time: 639 ms)
19:21:24 T:139992949044992 NOTICE: Creating Demuxer
19:21:24 T:139992949044992 DEBUG: SECTION:LoadDLL(special://xbmcbin/system/players/dvdplayer/avcodec-53-x86_64-linux.so)
19:21:24 T:139992949044992 DEBUG: Loading: /usr/lib/xbmc/system/players/dvdplayer/avcodec-53-x86_64-linux.so
19:21:24 T:139992949044992 DEBUG: SECTION:LoadDLL(special://xbmcbin/system/players/dvdplayer/avformat-53-x86_64-linux.so)
19:21:24 T:139992949044992 DEBUG: Loading: /usr/lib/xbmc/system/players/dvdplayer/avformat-53-x86_64-linux.so
19:21:24 T:139992949044992 DEBUG: Open - probing detected format [matroska,webm]
19:21:24 T:139992949044992 DEBUG: Open - avformat_find_stream_info starting
19:21:24 T:139992949044992 DEBUG: Open - av_find_stream_info finished
19:21:24 T:139992949044992 INFO: ffmpeg[A5FFB700]: Input #0, matroska,webm, from 'smb://ANDI/xxx.mkv':
19:21:24 T:139992949044992 INFO: ffmpeg[A5FFB700]: Duration: 01:27:57.02, start: 0.000000, bitrate: 13143 kb/s
19:21:24 T:139992949044992 INFO: ffmpeg[A5FFB700]: Stream #0:0(ger): Video: h264 (High), yuv420p, 1920x1080 [SAR 1:1 DAR 16:9], 23.98 fps, 23.98 tbr, 1k tbn, 47.95 tbc (default)
19:21:24 T:139992949044992 INFO: ffmpeg[A5FFB700]: Stream #0:1(ger): Audio: dts (DTS), 48000 Hz, 5.1(side), s16, 1536 kb/s (default)
19:21:24 T:139992949044992 INFO: ffmpeg[A5FFB700]: Metadata:
19:21:24 T:139992949044992 INFO: ffmpeg[A5FFB700]: title : German
19:21:24 T:139992949044992 INFO: ffmpeg[A5FFB700]: Stream #0:2(eng): Audio: dts (DTS), 48000 Hz, 5.1(side), s16, 1536 kb/s
19:21:24 T:139992949044992 INFO: ffmpeg[A5FFB700]: Metadata:
19:21:24 T:139992949044992 INFO: ffmpeg[A5FFB700]: title : English
19:21:24 T:139992949044992 NOTICE: Opening video stream: 0 source: 256
19:21:24 T:139992949044992 NOTICE: Creating video codec with codec id: 28
19:21:24 T:139992949044992 DEBUG: CDVDFactoryCodec: compiled in hardware support: CrystalHD:no OpenMax:no VDPAU:yes VAAPI:yes
19:21:24 T:139992949044992 DEBUG: FactoryCodec - Video: - Opening
19:21:24 T:139992949044992 DEBUG: SECTION:LoadDLL(special://xbmcbin/system/players/dvdplayer/swresample-0-x86_64-linux.so)
19:21:24 T:139992949044992 DEBUG: Loading: /usr/lib/xbmc/system/players/dvdplayer/swresample-0-x86_64-linux.so
19:21:24 T:139992949044992 DEBUG: SECTION:LoadDLL(special://xbmcbin/system/players/dvdplayer/avfilter-2-x86_64-linux.so)
19:21:24 T:139992949044992 DEBUG: Loading: /usr/lib/xbmc/system/players/dvdplayer/avfilter-2-x86_64-linux.so
19:21:24 T:139992949044992 NOTICE: CDVDVideoCodecFFmpeg::Open() Creating VDPAU(1920x1080, 28)
19:21:24 T:139992949044992 NOTICE: vdp_device = 0x00000001 vdp_st = 0x00000000
19:21:24 T:139992949044992 NOTICE: VDPAU Decoder capabilities:
19:21:24 T:139992949044992 NOTICE: name level macbs width height
19:21:24 T:139992949044992 NOTICE: ------------------------------------
19:21:24 T:139992949044992 NOTICE: MPEG1 16 9216 2048 1152
19:21:24 T:139992949044992 NOTICE: MPEG2_SIMPLE 16 9216 2048 1152
19:21:24 T:139992949044992 NOTICE: MPEG2_MAIN 16 9216 2048 1152
19:21:24 T:139992949044992 NOTICE: H264_BASELINE 16 9216 2048 1152
19:21:24 T:139992949044992 NOTICE: H264_MAIN 16 9216 2048 1152
19:21:24 T:139992949044992 NOTICE: H264_HIGH 16 9216 2048 1152
19:21:24 T:139992949044992 NOTICE: VC1_SIMPLE 16 9216 2048 1152
19:21:24 T:139992949044992 NOTICE: VC1_MAIN 16 9216 2048 1152
19:21:24 T:139992949044992 NOTICE: VC1_ADVANCED 16 9216 2048 1152
19:21:24 T:139992949044992 NOTICE: MPEG4_PART2_ASP 16 9216 2048 1152
19:21:24 T:139992949044992 NOTICE: ------------------------------------
19:21:24 T:139992949044992 NOTICE: Mixer feature: VDP_VIDEO_MIXER_FEATURE_NOISE_REDUCTION
19:21:24 T:139992949044992 NOTICE: Mixer feature: VDP_VIDEO_MIXER_FEATURE_SHARPNESS
19:21:24 T:139992949044992 NOTICE: CDVDVideoCodecFFmpeg::Open() Using codec: H.264 / AVC / MPEG-4 AVC / MPEG-4 part 10 (VDPAU acceleration)
19:21:24 T:139992949044992 DEBUG: FactoryCodec - Video: ff-h264_vdpau-vdpau - Opened
19:21:24 T:139992957437696 NOTICE: Thread CVideoReferenceClock start, auto delete: false
19:21:24 T:139992957437696 DEBUG: CVideoReferenceClock: Setting up GLX
19:21:24 T:139992957437696 DEBUG: CVideoReferenceClock: GL_VENDOR:x.org, not using nvidia-settings
19:21:24 T:139992957437696 DEBUG: CVideoReferenceClock: Using RandR for refreshrate detection
19:21:24 T:139992957437696 DEBUG: CVideoReferenceClock: Detected refreshrate: 50 hertz
19:21:24 T:139992949044992 NOTICE: Creating video thread
19:21:24 T:139991896848128 NOTICE: Thread CDVDPlayerVideo start, auto delete: false
19:21:24 T:139991896848128 NOTICE: running thread: video_thread
19:21:24 T:139992949044992 NOTICE: Opening audio stream: 1 source: 256
19:21:24 T:139992949044992 NOTICE: Finding audio codec for: 86020
19:21:24 T:139991896848128 DEBUG: CDVDPlayerVideo - CDVDMsg::GENERAL_SYNCHRONIZE
19:21:24 T:139992949044992 DEBUG: FactoryCodec - Audio: FFmpeg - Opening
19:21:24 T:139992949044992 DEBUG: FactoryCodec - Audio: FFmpeg - Opened
19:21:24 T:139992949044992 NOTICE: Creating audio thread
19:21:24 T:139991888455424 NOTICE: Thread CDVDPlayerAudio start, auto delete: false
19:21:24 T:139991888455424 NOTICE: running thread: CDVDPlayerAudio::Process()
19:21:24 T:139992949044992 DEBUG: ReadEditDecisionLists - Checking for edit decision lists (EDL) on local drive or remote share for: smb://ANDI/xxx.mkv
19:21:24 T:139992949044992 DEBUG: CDVDPlayer::SetCaching - caching state 3
19:21:24 T:139991896848128 INFO: CDVDPlayerVideo - Stillframe left, switching to normal playback
19:21:25 T:139991888455424 NOTICE: Creating audio stream (codec id: 86020, channels: 6, sample rate: 48000, no pass-through)
19:21:25 T:139991888455424 INFO: CSoftAE::MakeStream - AE_FMT_S16NE, 48000, FL,FR,FC,LFE,SL,SR
19:21:25 T:139991896848128 NOTICE: (VDPAU) screenWidth:0 vidWidth:1920 surfaceWidth:1920
19:21:25 T:139991896848128 NOTICE: (VDPAU) screenHeight:0 vidHeight:1080 surfaceHeight:1088
19:21:25 T:139993780455360 DEBUG: CGUIInfoManager::SetCurrentMovie(smb://ANDI/xxx.mkv)
19:21:25 T:139993780455360 DEBUG: GetMovieId (smb://ANDI/xxx.mkv), query = select idMovie from movie where idFile=17
19:21:25 T:139993780455360 DEBUG: CAnnouncementManager - Announcement: OnPlay from xbmc
19:21:25 T:139993780455360 DEBUG: GOT ANNOUNCEMENT, type: 1, from xbmc, message OnPlay
19:21:25 T:139993780455360 DEBUG: Building didl for object 'smb://ANDI/xxx.mkv'
19:21:25 T:139991896848128 DEBUG: CDVDPlayerVideo - CDVDMsg::GENERAL_RESYNC(167000.000000, 0)
19:21:25 T:139991896848128 NOTICE: Creating 1920x1080 pixmap
19:21:25 T:139993337231104 DEBUG: CSoftAE::Run - Sink restart flagged
19:21:25 T:139993337231104 INFO: CSoftAE::LoadSettings - Stereo upmix is enabled
19:21:25 T:139993337231104 INFO: CSoftAE::InternalOpenSink - sink incompatible, re-starting
19:21:25 T:139991896848128 DEBUG: Found 60 fbconfigs.
19:21:25 T:139991896848128 DEBUG: Using fbconfig index 0.
19:21:25 T:139991896848128 NOTICE: (VDPAU) Total Output Surfaces Available: 2 of a max (tmp: 2 const: 4)
19:21:25 T:139991896848128 NOTICE: (VDPAU) Creating the video mixer
19:21:25 T:139991896848128 NOTICE: fps: 23.976024, pwidth: 1920, pheight: 1080, dwidth: 1920, dheight: 1080
19:21:25 T:139991896848128 DEBUG: OutputPicture - change configuration. 1920x1080. framerate: 23.98. format: VDPAU
19:21:25 T:139991896848128 NOTICE: Display resolution ADJUST : HDMI-0: 1920x1080 @ 24.00Hz (21) (weight: 0.001)
19:21:25 T:139991896848128 DEBUG: CVideoReferenceClock: Clock speed 100.100000%
19:21:25 T:139993780455360 NOTICE: Using GL_TEXTURE_2D
19:21:25 T:139993780455360 NOTICE: GL: Using VDPAU render method
19:21:25 T:139993780455360 NOTICE: GL: NPOT texture support detected
19:21:25 T:139993780455360 NOTICE: GL: Using GL_ARB_pixel_buffer_object
19:21:25 T:139993780455360 DEBUG: Activating window ID: 12005
19:21:25 T:139993780455360 DEBUG: ------ Window Deinit (MyVideoNav.xml) ------
19:21:25 T:139993780455360 DEBUG: OnLostDevice - notify display change event
19:21:25 T:139993780455360 DEBUG: Flush - flushing renderer
19:21:25 T:139993780455360 NOTICE: CVDPAU::OnLostDevice event
19:21:25 T:139993780455360 DEBUG: GLX: Destroying glPixmap
19:21:25 T:139993780455360 DEBUG: GLX: Destroying XPixmap
19:21:25 T:139993780455360 NOTICE: (VDPAU) FiniVDPAUOutput
19:21:25 T:139993780455360 INFO: XRANDR: /usr/lib/xbmc/xbmc-xrandr --output HDMI-0 --mode 0x4a
19:21:25 T:139993337231104 INFO: CAESinkALSA::Initialize - Attempting to open device "@"
19:21:25 T:139993337231104 INFO: CAESinkALSA::Initialize - Opened device "surround51"
19:21:25 T:139993337231104 INFO: CAESinkALSA::InitializeHW - Your hardware does not support AE_FMT_FLOAT, trying other formats
19:21:25 T:139993337231104 INFO: CAESinkALSA::InitializeHW - Using data format AE_FMT_S24NE4
19:21:25 T:139993337231104 DEBUG: CAESinkALSA::InitializeHW - Request: periodSize 2400, bufferSize 9600
19:21:25 T:139993337231104 DEBUG: CAESinkALSA::InitializeHW - Got: periodSize 2400, bufferSize 9600
19:21:25 T:139993337231104 DEBUG: CAESinkALSA::InitializeHW - Setting timeout to 200 ms
19:21:25 T:139993337231104 DEBUG: CSoftAE::InternalOpenSink - ALSA Initialized:
19:21:25 T:139993337231104 DEBUG: Output Device : Default (Xonar DX Multichannel)
19:21:25 T:139993337231104 DEBUG: Sample Rate : 48000
19:21:25 T:139993337231104 DEBUG: Sample Format : AE_FMT_S24NE4
19:21:25 T:139993337231104 DEBUG: Channel Count : 6
19:21:25 T:139993337231104 DEBUG: Channel Layout: FL,FR,BL,BR,FC,LFE
19:21:25 T:139993337231104 DEBUG: Frames : 2400
19:21:25 T:139993337231104 DEBUG: Frame Samples : 14400
19:21:25 T:139993337231104 DEBUG: Frame Size : 24
19:21:25 T:139993337231104 DEBUG: CSoftAE::InternalOpenSink - Using speaker layout: 5.1
19:21:25 T:139993337231104 DEBUG: CSoftAE::InternalOpenSink - Internal Buffer Size: 57600
19:21:25 T:139993337231104 DEBUG: AERemap: Downmix normalization is disabled
19:21:25 T:139992949044992 DEBUG: Previous line repeats 4 times.
19:21:25 T:139992949044992 DEBUG: CDVDPlayer::SetCaching - caching state 0
19:21:25 T:139993337231104 DEBUG: AERemap: Downmix normalization is disabled
19:21:25 T:139993337231104 DEBUG: Previous line repeats 1 times.
19:21:25 T:139993337231104 DEBUG: CSoftAEStream::CSoftAEStream - Converting from AE_FMT_S16NE to AE_FMT_FLOAT
19:21:25 T:139991888455424 DEBUG: CDVDPlayerAudio:: synctype set to 2: resample
19:21:25 T:139991888455424 DEBUG: CDVDPlayerAudio:: Discontinuity1 - was:4139.147000, should be:99.419667, error:-4039.727333
19:21:25 T:139991888455424 DEBUG: CDVDPlayerAudio - CDVDMsg::GENERAL_RESYNC(10000.000000, 1)
19:21:25 T:139992949044992 DEBUG: CDVDPlayer::HandleMessages - player started 1
19:21:25 T:139993337231104 DEBUG: CSoftAE::Run - Sink restart flagged
19:21:25 T:139993337231104 INFO: CSoftAE::LoadSettings - Stereo upmix is enabled
19:21:25 T:139993337231104 INFO: CSoftAE::InternalOpenSink - keeping old sink with : AE_FMT_FLOAT, FL,FR,FC,BL,BR,LFE, 48000hz
19:21:25 T:139993337231104 DEBUG: CSoftAE::InternalOpenSink - Using speaker layout: 5.1
19:21:25 T:139993337231104 DEBUG: CSoftAE::InternalOpenSink - Internal Buffer Size: 57600
19:21:25 T:139992957437696 DEBUG: CVideoReferenceClock: detected 1 vblanks, missed 2, refreshrate might have changed
19:21:25 T:139993780455360 ERROR: GLX: Same window as before, refreshing context
19:21:25 T:139993780455360 INFO: GL: Maximum texture width: 16384
19:21:25 T:139993780455360 DEBUG: CRenderManager::UpdateDisplayLatency - Latency set to 0 msec
19:21:25 T:139993780455360 DEBUG: ------ Window Init (VideoFullScreen.xml) ------
19:21:25 T:139993780455360 INFO: Loading skin file: VideoFullScreen.xml, load type: KEEP_IN_MEMORY
19:21:25 T:139993780455360 NOTICE: Using GL_TEXTURE_2D
19:21:25 T:139991896848128 NOTICE: CVDPAU::Check waiting for display reset event
19:21:25 T:139993780455360 NOTICE: GL: Using VDPAU render method
19:21:25 T:139993780455360 NOTICE: GL: NPOT texture support detected
19:21:25 T:139993780455360 NOTICE: GL: Using GL_ARB_pixel_buffer_object
19:21:25 T:139993780455360 DEBUG: CheckDisplayEvents: Received RandR event 89
19:21:25 T:139993780455360 DEBUG: CheckDisplayEvents - notify display reset event
19:21:25 T:139993780455360 NOTICE: CVDPAU::OnResetDevice event
19:21:25 T:139991896848128 NOTICE: Attempting recovery
19:21:25 T:139991896848128 NOTICE: vdp_device = 0x00000001 vdp_st = 0x00000000
19:21:25 T:139991896848128 DEBUG: CDVDPlayerVideo - video decoder was flushed
19:21:25 T:139991896848128 DEBUG: CVDPAU::FFReleaseBuffer - ignoring invalid buffer
19:21:25 T:139991896848128 DEBUG: Previous line repeats 3 times.
19:21:25 T:139991896848128 NOTICE: (VDPAU) screenWidth:1920 vidWidth:1920 surfaceWidth:1920
19:21:25 T:139991896848128 NOTICE: (VDPAU) screenHeight:1080 vidHeight:1080 surfaceHeight:1088
19:21:25 T:139992949044992 DEBUG: CDVDPlayer::HandleMessages - player started 2
19:21:25 T:139991896848128 NOTICE: Creating 1920x1080 pixmap
19:21:25 T:139991896848128 DEBUG: Found 60 fbconfigs.
19:21:25 T:139991896848128 DEBUG: Using fbconfig index 0.
19:21:25 T:139991896848128 NOTICE: (VDPAU) Total Output Surfaces Available: 2 of a max (tmp: 2 const: 4)
19:21:25 T:139991896848128 NOTICE: (VDPAU) Creating the video mixer
19:21:25 T:139991896848128 DEBUG: CVideoReferenceClock: Clock speed 104.270833%
19:21:25 T:139993780455360 DEBUG: ------ Window Deinit (DialogBusy.xml) ------
19:21:25 T:139993780455360 ERROR: CWinSystemX11::XErrorHandler: BadDrawable (invalid Pixmap or Window parameter), type:0, serial:19101, error_code:9, request_code:152 minor_code:8
19:21:26 T:139991888455424 DEBUG: CDVDPlayerAudio:: Discontinuity1 - was:597724.273333, should be:497666.666667, error:-100057.606667
19:21:26 T:139992957437696 DEBUG: CVideoReferenceClock: Received RandR event 89
19:21:27 T:139992957437696 DEBUG: CVideoReferenceClock: Detected refreshrate: 24 hertz
19:21:27 T:139991888455424 DEBUG: CDVDPlayerAudio:: Discontinuity1 - was:941996.125667, should be:782833.402667, error:-159162.723000
19:21:27 T:139991896848128 DEBUG: CVideoReferenceClock: Clock speed 100.100000%
19:21:27 T:139991888455424 DEBUG: CDVDPlayerAudio:: Discontinuity1 - was:1096842.754667, should be:1310812.627000, error:213969.872333
19:21:27 T:139991888455424 DEBUG: CDVDPlayerAudio:: Discontinuity1 - was:1410874.922000, should be:1543306.990333, error:132432.068333
19:21:27 T:139991888455424 DEBUG: CDVDPlayerAudio:: Discontinuity1 - was:1692760.338333, should be:1830683.329000, error:137922.990667
19:21:27 T:139991888455424 DEBUG: CDVDPlayerAudio:: Discontinuity1 - was:1931490.324000, should be:2062739.533667, error:131249.209667
19:21:27 T:139991888455424 DEBUG: CDVDPlayerAudio:: Discontinuity1 - was:2212469.159667, should be:2347929.139333, error:135459.979667
19:21:30 T:139991896848128 DEBUG: CPullupCorrection: detected pattern of length 1: 41708.33, frameduration: 41708.333333
19:21:31 T:139992932259584 DEBUG: webserver: request received for /jsonrpc
19:21:31 T:139992932259584 DEBUG: JSONRPC: Incoming request: [{"id":0,"jsonrpc":"2.0","method":"Player.GetActivePlayers"},{"id":1,"jsonrpc":"2.0","method":"Application.GetProperties","params":{"properties":["volume","muted"]}}]
19:21:31 T:139992932259584 DEBUG: JSONRPC: Calling player.getactiveplayers
19:21:31 T:139992932259584 DEBUG: JSONRPC: Calling application.getproperties
19:21:36 T:139992932259584 DEBUG: webserver: request received for /jsonrpc
19:21:36 T:139992932259584 DEBUG: JSONRPC: Incoming request: [{"id":2,"jsonrpc":"2.0","method":"Player.GetProperties","params":{"playerid":1,"properties":["audiostreams","canseek","currentaudiostream","currentsubtitle","partymode","playlistid","position","repeat","shuffled","speed","subtitleenabled","subtitles","time","totaltime","type"]}},{"id":3,"jsonrpc":"2.0","method":"Player.GetItem","params":{"playerid":1,"properties":["album","albumartist","artist","director","episode","fanart","file","genre","plot","rating","season","showtitle","studio","imdbnumber","tagline","thumbnail","title","track","writer","year","streamdetails","originaltitle"]}}]
19:21:36 T:139992932259584 DEBUG: JSONRPC: Calling player.getproperties
19:21:36 T:139992932259584 DEBUG: JSONRPC: Calling player.getitem
19:21:38 T:139993780455360 DEBUG: Keyboard: scancode: ae, sym: 00b2, unicode: 0000, modifier: 0
19:21:38 T:139993780455360 DEBUG: OnKey: stop (f0bc) pressed, action is Stop
19:21:38 T:139993780455360 NOTICE: CDVDPlayer::CloseFile()
19:21:38 T:139993780455360 NOTICE: DVDPlayer: waiting for threads to exit
19:21:38 T:139992949044992 NOTICE: CDVDPlayer::OnExit()
19:21:38 T:139992949044992 NOTICE: DVDPlayer: closing audio stream
19:21:38 T:139992949044992 NOTICE: Closing audio stream
19:21:38 T:139992949044992 NOTICE: Waiting for audio thread to exit
19:21:38 T:139991888455424 NOTICE: thread end: CDVDPlayerAudio::OnExit()
19:21:38 T:139991888455424 DEBUG: Thread CDVDPlayerAudio 139991888455424 terminating
19:21:38 T:139992949044992 NOTICE: Closing audio device
19:21:38 T:139992949044992 DEBUG: CSoftAEStream::~CSoftAEStream - Destructed
19:21:38 T:139992949044992 NOTICE: Deleting audio codec
19:21:38 T:139992949044992 NOTICE: DVDPlayer: closing video stream
19:21:38 T:139992949044992 NOTICE: Closing video stream
19:21:38 T:139992949044992 NOTICE: waiting for video thread to exit
19:21:38 T:139993337231104 DEBUG: CSoftAE::Run - Sink restart flagged
19:21:38 T:139993337231104 INFO: CSoftAE::LoadSettings - Stereo upmix is enabled
19:21:38 T:139993337231104 INFO: CSoftAE::InternalOpenSink - sink incompatible, re-starting
19:21:39 T:139991896848128 NOTICE: thread end: video_thread
19:21:39 T:139991896848128 DEBUG: Thread CDVDPlayerVideo 139991896848128 terminating
19:21:39 T:139992949044992 NOTICE: deleting video codec
19:21:39 T:139992949044992 NOTICE: CDVDPlayer::OnExit() deleting demuxer
19:21:39 T:139992949044992 NOTICE: CDVDPlayer::OnExit() deleting input stream
19:21:39 T:139992949044992 DEBUG: CSmbFile::Close closing fd 10001
19:21:39 T:139992949044992 DEBUG: CAnnouncementManager - Announcement: OnStop from xbmc
19:21:39 T:139992949044992 DEBUG: GOT ANNOUNCEMENT, type: 1, from xbmc, message OnStop
19:21:39 T:139992949044992 DEBUG: Thread CDVDPlayer 139992949044992 terminating
19:21:39 T:139993780455360 NOTICE: DVDPlayer: finished waiting
19:21:39 T:139993780455360 DEBUG: LinuxRendererGL: Cleaning up GL resources
19:21:39 T:139993780455360 NOTICE: (VDPAU) Close
19:21:39 T:139993780455360 DEBUG: GLX: Destroying glPixmap
19:21:39 T:139993780455360 DEBUG: GLX: Destroying XPixmap
19:21:39 T:139993780455360 NOTICE: (VDPAU) FiniVDPAUOutput
19:21:39 T:139993780455360 DEBUG: CGUIWindowManager::PreviousWindow: Deactivate
19:21:39 T:139993780455360 DEBUG: ------ Window Deinit (VideoFullScreen.xml) ------
19:21:39 T:139993780455360 DEBUG: OnLostDevice - notify display change event
19:21:39 T:139993780455360 DEBUG: Flush - flushing renderer
19:21:39 T:139993780455360 INFO: XRANDR: /usr/lib/xbmc/xbmc-xrandr --output HDMI-0 --mode 0x47
19:21:39 T:139993337231104 INFO: CAESinkALSA::Initialize - Attempting to open device "@"
19:21:39 T:139993337231104 INFO: CAESinkALSA::Initialize - Opened device "surround51"
19:21:39 T:139993337231104 INFO: CAESinkALSA::InitializeHW - Your hardware does not support AE_FMT_FLOAT, trying other formats
19:21:39 T:139993337231104 INFO: CAESinkALSA::InitializeHW - Using data format AE_FMT_S24NE4
19:21:39 T:139993337231104 DEBUG: CAESinkALSA::InitializeHW - Request: periodSize 2205, bufferSize 8820
19:21:39 T:139993337231104 DEBUG: CAESinkALSA::InitializeHW - Got: periodSize 2204, bufferSize 8820
19:21:39 T:139993337231104 DEBUG: CAESinkALSA::InitializeHW - Setting timeout to 200 ms
19:21:39 T:139993337231104 DEBUG: CSoftAE::InternalOpenSink - ALSA Initialized:
19:21:39 T:139993337231104 DEBUG: Output Device : Default (Xonar DX Multichannel)
19:21:39 T:139993337231104 DEBUG: Sample Rate : 44100
19:21:39 T:139993337231104 DEBUG: Sample Format : AE_FMT_S24NE4
19:21:39 T:139993337231104 DEBUG: Channel Count : 6
19:21:39 T:139993337231104 DEBUG: Channel Layout: FL,FR,BL,BR,FC,LFE
19:21:39 T:139993337231104 DEBUG: Frames : 2204
19:21:39 T:139993337231104 DEBUG: Frame Samples : 13224
19:21:39 T:139993337231104 DEBUG: Frame Size : 24
19:21:39 T:139993337231104 DEBUG: CSoftAE::InternalOpenSink - Using speaker layout: 5.1
19:21:39 T:139993337231104 DEBUG: CSoftAE::InternalOpenSink - Internal Buffer Size: 52896
19:21:39 T:139993337231104 DEBUG: AERemap: Downmix normalization is disabled
19:21:39 T:139993780455360 DEBUG: Previous line repeats 5 times.
19:21:39 T:139993780455360 ERROR: GLX: Same window as before, refreshing context
19:21:39 T:139993780455360 INFO: GL: Maximum texture width: 16384
19:21:39 T:139993780455360 DEBUG: CRenderManager::UpdateDisplayLatency - Latency set to 0 msec
19:21:39 T:139993780455360 DEBUG: CheckDisplayEvents: Received RandR event 89
19:21:39 T:139993780455360 DEBUG: CheckDisplayEvents - notify display reset event
19:21:39 T:139993780455360 DEBUG: CGUIWindowManager::PreviousWindow: Activate new
19:21:39 T:139993780455360 DEBUG: ------ Window Init (MyVideoNav.xml) ------
19:21:39 T:139993780455360 DEBUG: CGUIMediaWindow::GetDirectory (videodb://1/2/)
19:21:39 T:139993780455360 DEBUG: ParentPath = [videodb://1/2/]
19:21:39 T:139993780455360 DEBUG: RunQuery took 8 ms for 357 items query: select * from movieview
19:21:39 T:139992126953216 NOTICE: Thread Background Loader start, auto delete: false
19:21:39 T:139992126953216 DEBUG: Thread Background Loader 139992126953216 terminating
19:21:39 T:139992126953216 NOTICE: Thread Background Loader start, auto delete: false
19:21:39 T:139992126953216 DEBUG: Thread Background Loader 139992126953216 terminating
19:21:39 T:139993780455360 DEBUG: ExecuteXBMCAction : Translating ClearProperty(BrowseActors,home)
19:21:39 T:139993780455360 DEBUG: ExecuteXBMCAction : To ClearProperty(BrowseActors,home)
19:21:39 T:139993780455360 NOTICE: CDVDPlayer::CloseFile()
19:21:39 T:139993780455360 WARNING: CDVDMessageQueue(player)::Put MSGQ_NOT_INITIALIZED
19:21:39 T:139993780455360 NOTICE: DVDPlayer: waiting for threads to exit
19:21:39 T:139993780455360 NOTICE: DVDPlayer: finished waiting
19:21:39 T:139993780455360 DEBUG: LinuxRendererGL: Cleaning up GL resources
19:21:39 T:139992957437696 DEBUG: CVideoReferenceClock: Cleaning up GLX
19:21:39 T:139992957437696 DEBUG: Thread CVideoReferenceClock 139992957437696 terminating
19:21:39 T:139991938168576 DEBUG: DoWork - Saving file state for video item smb://ANDI/xxx.mkv
19:21:39 T:139991938168576 DEBUG: CAnnouncementManager - Announcement: OnUpdate from xbmc
19:21:39 T:139991938168576 DEBUG: GOT ANNOUNCEMENT, type: 16, from xbmc, message OnUpdate
19:21:40 T:139993069709056 DEBUG: JSONRPC: Incoming request: {"jsonrpc": "2.0", "id": 1, "method": "VideoLibrary.GetMovies", "params": {"properties": ["title", "originaltitle", "playcount", "year", "genre", "studio", "country", "tagline", "plot", "runtime", "file", "plotoutline", "lastplayed", "trailer", "rating", "resume", "art", "streamdetails", "mpaa", "director"], "limits": {"end": 20}, "sort": {"order": "descending", "method": "lastplayed"}, "filter": {"field": "inprogress", "operator": "true", "value": ""}}}
19:21:40 T:139993069709056 DEBUG: JSONRPC: Calling videolibrary.getmovies
19:21:40 T:139993069709056 DEBUG: RunQuery took 1 ms for 1 items query: select * from movieview WHERE (movieview.idFile IN (select idFile from bookmark where type = 1))
19:21:40 T:139993069709056 DEBUG: JSONRPC: Incoming request: {"jsonrpc": "2.0", "id": 1, "method": "VideoLibrary.GetMovies", "params": {"properties": ["title", "originaltitle", "playcount", "year", "genre", "studio", "country", "tagline", "plot", "runtime", "file", "plotoutline", "lastplayed", "trailer", "rating", "resume", "art", "streamdetails", "mpaa", "director"], "limits": {"end": 20}, "sort": {"order": "descending", "method": "dateadded"}, "filter": {"field": "playcount", "operator": "is", "value": "0"}}}
19:21:40 T:139993069709056 DEBUG: JSONRPC: Calling videolibrary.getmovies
19:21:40 T:139993069709056 DEBUG: RunQuery took 9 ms for 183 items query: select * from movieview WHERE ((movieview.playCount IS NULL OR movieview.playCount = 0))
19:21:43 T:139993780455360 DEBUG: Keyboard: scancode: 24, sym: 000d, unicode: 000d, modifier: 0
19:21:43 T:139993780455360 DEBUG: OnKey: return (f00d) pressed, action is Select
19:21:43 T:139993780455360 DEBUG: OnPlayMedia smb://ANDI/xxx.mkv
19:21:43 T:139993780455360 DEBUG: CAnnouncementManager - Announcement: OnClear from xbmc
19:21:43 T:139993780455360 DEBUG: GOT ANNOUNCEMENT, type: 2, from xbmc, message OnClear
19:21:43 T:139993780455360 DEBUG: CAnnouncementManager - Announcement: OnAdd from xbmc
19:21:43 T:139993780455360 DEBUG: GOT ANNOUNCEMENT, type: 2, from xbmc, message OnAdd
19:21:43 T:139993780455360 DEBUG: CPlayerCoreFactory::GetPlayers(smb://ANDI/xxx.mkv)
19:21:43 T:139993780455360 DEBUG: CPlayerSelectionRule::GetPlayers: considering rule: system rules
19:21:43 T:139993780455360 DEBUG: CPlayerSelectionRule::GetPlayers: matches rule: system rules
19:21:43 T:139993780455360 DEBUG: CPlayerSelectionRule::GetPlayers: considering rule: rtv
19:21:43 T:139993780455360 DEBUG: CPlayerSelectionRule::GetPlayers: considering rule: hdhomerun/myth/mms/udp
19:21:43 T:139993780455360 DEBUG: CPlayerSelectionRule::GetPlayers: considering rule: lastfm/shout
19:21:43 T:139993780455360 DEBUG: CPlayerSelectionRule::GetPlayers: considering rule: rtmp
19:21:43 T:139993780455360 DEBUG: CPlayerSelectionRule::GetPlayers: considering rule: rtsp
19:21:43 T:139993780455360 DEBUG: CPlayerSelectionRule::GetPlayers: considering rule: streams
19:21:43 T:139993780455360 DEBUG: CPlayerSelectionRule::GetPlayers: considering rule: dvd
19:21:43 T:139993780455360 DEBUG: CPlayerSelectionRule::GetPlayers: considering rule: dvdimage
19:21:43 T:139993780455360 DEBUG: CPlayerSelectionRule::GetPlayers: considering rule: sdp/asf
19:21:43 T:139993780455360 DEBUG: CPlayerSelectionRule::GetPlayers: considering rule: nsv
19:21:43 T:139993780455360 DEBUG: CPlayerSelectionRule::GetPlayers: considering rule: radio
19:21:43 T:139993780455360 DEBUG: CPlayerCoreFactory::GetPlayers: matched 0 rules with players
19:21:43 T:139993780455360 DEBUG: CPlayerCoreFactory::GetPlayers: adding videodefaultplayer (1)
19:21:43 T:139993780455360 DEBUG: CPlayerCoreFactory::GetPlayers: for video=1, audio=0
19:21:43 T:139993780455360 DEBUG: CPlayerCoreFactory::GetPlayers: for video=1, audio=1
19:21:43 T:139993780455360 DEBUG: CPlayerCoreFactory::GetPlayers: adding player: DVDPlayer (1)
19:21:43 T:139993780455360 DEBUG: CPlayerCoreFactory::GetPlayers: added 1 players
19:21:43 T:139993780455360 NOTICE: DVDPlayer: Opening: smb://ANDI/xxx.mkv
19:21:43 T:139993780455360 WARNING: CDVDMessageQueue(player)::Put MSGQ_NOT_INITIALIZED
19:21:43 T:139993780455360 DEBUG: CRenderManager::UpdateDisplayLatency - Latency set to 0 msec
19:21:43 T:139993780455360 DEBUG: LinuxRendererGL: Cleaning up GL resources
19:21:43 T:139993780455360 DEBUG: CLinuxRendererGL::PreInit - precision of luminance 16 is 16
19:21:43 T:139992957437696 NOTICE: Thread CDVDPlayer start, auto delete: false
19:21:43 T:139992957437696 NOTICE: Creating InputStream
19:21:43 T:139992957437696 DEBUG: CSmbFile::Open - opened xxx.mkv, fd=10001
19:21:43 T:139992957437696 DEBUG: ScanForExternalSubtitles: Searching for subtitles...
19:21:43 T:139992957437696 DEBUG: OpenDir - Using authentication url smb://ANDI/Filme
19:21:43 T:139993780455360 DEBUG: ------ Window Init (DialogBusy.xml) ------
19:21:43 T:139992957437696 DEBUG: ScanForExternalSubtitles: END (total time: 648 ms)
19:21:43 T:139992957437696 NOTICE: Creating Demuxer
19:21:43 T:139992957437696 DEBUG: Open - probing detected format [matroska,webm]
19:21:43 T:139992957437696 DEBUG: Open - avformat_find_stream_info starting
19:21:44 T:139992957437696 DEBUG: Open - av_find_stream_info finished
19:21:44 T:139992957437696 INFO: ffmpeg[A67FC700]: Input #0, matroska,webm, from 'smb://ANDI/xxx.mkv':
19:21:44 T:139992957437696 INFO: ffmpeg[A67FC700]: Duration: 01:27:57.02, start: 0.000000, bitrate: 13143 kb/s
19:21:44 T:139992957437696 INFO: ffmpeg[A67FC700]: Stream #0:0(ger): Video: h264 (High), yuv420p, 1920x1080 [SAR 1:1 DAR 16:9], 23.98 fps, 23.98 tbr, 1k tbn, 47.95 tbc (default)
19:21:44 T:139992957437696 INFO: ffmpeg[A67FC700]: Stream #0:1(ger): Audio: dts (DTS), 48000 Hz, 5.1(side), s16, 1536 kb/s (default)
19:21:44 T:139992957437696 INFO: ffmpeg[A67FC700]: Metadata:
19:21:44 T:139992957437696 INFO: ffmpeg[A67FC700]: title : German
19:21:44 T:139992957437696 INFO: ffmpeg[A67FC700]: Stream #0:2(eng): Audio: dts (DTS), 48000 Hz, 5.1(side), s16, 1536 kb/s
19:21:44 T:139992957437696 INFO: ffmpeg[A67FC700]: Metadata:
19:21:44 T:139992957437696 INFO: ffmpeg[A67FC700]: title : English
19:21:44 T:139992957437696 NOTICE: Opening video stream: 0 source: 256
19:21:44 T:139992957437696 NOTICE: Creating video codec with codec id: 28
19:21:44 T:139992957437696 DEBUG: CDVDFactoryCodec: compiled in hardware support: CrystalHD:no OpenMax:no VDPAU:yes VAAPI:yes
19:21:44 T:139992957437696 DEBUG: FactoryCodec - Video: - Opening
19:21:44 T:139992957437696 NOTICE: CDVDVideoCodecFFmpeg::Open() Creating VDPAU(1920x1080, 28)
19:21:46 T:139992932259584 DEBUG: webserver: request received for /jsonrpc
19:21:46 T:139992932259584 DEBUG: JSONRPC: Incoming request: [{"id":0,"jsonrpc":"2.0","method":"Player.GetActivePlayers"},{"id":1,"jsonrpc":"2.0","method":"Application.GetProperties","params":{"properties":["volume","muted"]}}]
19:21:46 T:139992932259584 DEBUG: JSONRPC: Calling player.getactiveplayers
19:21:46 T:139992932259584 DEBUG: JSONRPC: Calling application.getproperties
19:21:47 T:139992823219968 DEBUG: webserver: request received for /image/image%3A%2F%2Fhttp%253a%252f%252fcf2.imgobject.com%252ft%252fp%252foriginal%252frbrQPjl2n4gTPsPXim9ckpRuycg.jpg%2F
19:21:48 T:139992823219968 DEBUG: webserver: request received for /jsonrpc
19:21:48 T:139992823219968 DEBUG: JSONRPC: Incoming request: [{"id":0,"jsonrpc":"2.0","method":"Player.GetActivePlayers"},{"id":1,"jsonrpc":"2.0","method":"Application.GetProperties","params":{"properties":["volume","muted"]}}]
19:21:48 T:139992823219968 DEBUG: JSONRPC: Calling player.getactiveplayers
19:21:48 T:139992823219968 DEBUG: JSONRPC: Calling application.getproperties
19:21:48 T:139992932259584 DEBUG: webserver: request received for /image/image%3A%2F%2Fhttp%253a%252f%252fcf2.imgobject.com%252ft%252fp%252foriginal%252frbrQPjl2n4gTPsPXim9ckpRuycg.jpg%2F
19:21:53 T:139993337231104 DEBUG: Previous line repeats 2 times.
19:21:53 T:139993337231104 DEBUG: Suspended the Sink
Playing Live TV with xvdr (0.9.8-1, self compiled and packaged from github) fails every time with a freeze:
19:48:04 T:140440470034368 DEBUG: ------ Window Init (MyPVR.xml) ------
19:48:04 T:140440470034368 INFO: Loading skin file: MyPVR.xml, load type: LOAD_EVERY_TIME
19:48:04 T:140440470034368 DEBUG: CGUIMediaWindow::GetDirectory ()
19:48:04 T:140440470034368 DEBUG: ParentPath = []
19:48:04 T:140440470034368 DEBUG: CGUIWindowPVRCommon - OnMessageFocus - focus set to window 'tv'
19:48:04 T:140440470034368 DEBUG: CGUIWindowPVRChannels - UpdateData - update window 'tv'. set view to 11
19:48:04 T:140440470034368 DEBUG: CGUIMediaWindow::GetDirectory (pvr://channels/tv/Alle TV-Kanäle/)
19:48:04 T:140440470034368 DEBUG: ParentPath = []
19:48:04 T:140438627669760 DEBUG: CPVRDirectory::GetDirectory(pvr://channels/tv/Alle TV-Kanäle)
19:48:04 T:140439491426048 NOTICE: Thread PVR Channel Window start, auto delete: false
19:48:04 T:140440470034368 DEBUG: CGUIWindowPVRCommon - OnMessageFocus - focus set to window 'tv'
19:48:05 T:140440470034368 DEBUG: Previous line repeats 1 times.
19:48:05 T:140440470034368 DEBUG: Keyboard: scancode: 24, sym: 000d, unicode: 000d, modifier: 0
19:48:05 T:140440470034368 DEBUG: OnKey: return (f00d) pressed, action is Select
19:48:06 T:140440470034368 DEBUG: CPlayerCoreFactory::GetPlayers(pvr://channels/tv/Alle TV-Kanäle/0.pvr)
19:48:06 T:140440470034368 DEBUG: CPlayerSelectionRule::GetPlayers: considering rule: system rules
19:48:06 T:140440470034368 DEBUG: CPlayerSelectionRule::GetPlayers: matches rule: system rules
19:48:06 T:140440470034368 DEBUG: CPlayerSelectionRule::GetPlayers: considering rule: rtv
19:48:06 T:140440470034368 DEBUG: CPlayerSelectionRule::GetPlayers: considering rule: hdhomerun/myth/mms/udp
19:48:06 T:140440470034368 DEBUG: CPlayerSelectionRule::GetPlayers: considering rule: lastfm/shout
19:48:06 T:140440470034368 DEBUG: CPlayerSelectionRule::GetPlayers: considering rule: rtmp
19:48:06 T:140440470034368 DEBUG: CPlayerSelectionRule::GetPlayers: considering rule: rtsp
19:48:06 T:140440470034368 DEBUG: CPlayerSelectionRule::GetPlayers: considering rule: streams
19:48:06 T:140440470034368 DEBUG: CPlayerSelectionRule::GetPlayers: considering rule: dvd
19:48:06 T:140440470034368 DEBUG: CPlayerSelectionRule::GetPlayers: considering rule: dvdimage
19:48:06 T:140440470034368 DEBUG: CPlayerSelectionRule::GetPlayers: considering rule: sdp/asf
19:48:06 T:140440470034368 DEBUG: CPlayerSelectionRule::GetPlayers: considering rule: nsv
19:48:06 T:140440470034368 DEBUG: CPlayerSelectionRule::GetPlayers: considering rule: radio
19:48:06 T:140440470034368 DEBUG: CPlayerCoreFactory::GetPlayers: matched 0 rules with players
19:48:06 T:140440470034368 DEBUG: CPlayerCoreFactory::GetPlayers: adding videodefaultplayer (1)
19:48:06 T:140440470034368 DEBUG: CPlayerCoreFactory::GetPlayers: for video=1, audio=0
19:48:06 T:140440470034368 DEBUG: CPlayerCoreFactory::GetPlayers: for video=1, audio=1
19:48:06 T:140440470034368 DEBUG: CPlayerCoreFactory::GetPlayers: adding player: DVDPlayer (1)
19:48:06 T:140440470034368 DEBUG: CPlayerCoreFactory::GetPlayers: added 1 players
19:48:06 T:140440470034368 NOTICE: DVDPlayer: Opening: pvr://channels/tv/Alle TV-Kanäle/0.pvr
19:48:06 T:140440470034368 WARNING: CDVDMessageQueue(player)::Put MSGQ_NOT_INITIALIZED
19:48:06 T:140440470034368 DEBUG: CRenderManager::UpdateDisplayLatency - Latency set to 0 msec
19:48:06 T:140440470034368 DEBUG: LinuxRendererGL: Cleaning up GL resources
19:48:06 T:140440470034368 DEBUG: CLinuxRendererGL::PreInit - precision of luminance 16 is 16
19:48:06 T:140440470034368 DEBUG: SECTION:LoadDLL(special://xbmcbin/system/players/dvdplayer/avutil-51-x86_64-linux.so)
19:48:06 T:140440470034368 DEBUG: Loading: /usr/lib/xbmc/system/players/dvdplayer/avutil-51-x86_64-linux.so
19:48:06 T:140440470034368 DEBUG: SECTION:LoadDLL(special://xbmcbin/system/players/dvdplayer/swscale-2-x86_64-linux.so)
19:48:06 T:140440470034368 DEBUG: Loading: /usr/lib/xbmc/system/players/dvdplayer/swscale-2-x86_64-linux.so
19:48:06 T:140438879053568 NOTICE: Thread CDVDPlayer start, auto delete: false
19:48:06 T:140438879053568 NOTICE: Creating InputStream
19:48:06 T:140438879053568 DEBUG: PVRManager - OpenLiveStream - opening live stream on channel 'Das Erste HD'
19:48:06 T:140438879053568 DEBUG: opening live stream for channel 'Das Erste HD'
19:48:06 T:140440470034368 DEBUG: ------ Window Init (DialogBusy.xml) ------
19:48:06 T:140438879053568 DEBUG: AddOnLog: VDR XVDR Client: Possible leak caused by workaround in GetLanguageCode
19:48:06 T:140438879053568 INFO: AddOnLog: VDR XVDR Client: Logged in at '1377798483+7200' to 'VDR-XVDR Server' Version: '0.9.9' with protocol version '4'
19:48:06 T:140438879053568 INFO: AddOnLog: VDR XVDR Client: Preferred Audio Language: deu
19:48:06 T:140438879053568 DEBUG: AddOnLog: VDR XVDR Client: changing to channel 1640430212 (priority 50)
19:48:06 T:140438879053568 INFO: AddOnLog: VDR XVDR Client: sucessfully switched channel
19:48:06 T:140438879053568 DEBUG: PVRFile - Open - playback has started on filename pvr://channels/tv/Alle TV-Kanäle/0.pvr
19:48:06 T:140438879053568 DEBUG: CDVDInputStreamPVRManager::Open - stream opened: pvr://channels/tv/Alle TV-Kanäle/0.pvr
19:48:06 T:140438879053568 NOTICE: Creating Demuxer
19:48:06 T:140438879053568 DEBUG: SECTION:LoadDLL(special://xbmcbin/system/players/dvdplayer/avcodec-53-x86_64-linux.so)
19:48:06 T:140438879053568 DEBUG: Loading: /usr/lib/xbmc/system/players/dvdplayer/avcodec-53-x86_64-linux.so
19:48:06 T:140438879053568 DEBUG: CDVDPlayer::SetCaching - caching state 2
19:48:06 T:140438879053568 WARNING: CDVDMessageQueue(audio)::Put MSGQ_NOT_INITIALIZED
19:48:06 T:140438879053568 WARNING: CDVDMessageQueue(video)::Put MSGQ_NOT_INITIALIZED
19:48:06 T:140440470034368 DEBUG: CGUIInfoManager::SetCurrentMovie(pvr://channels/tv/Alle TV-Kanäle/0.pvr)
19:48:06 T:140440470034368 DEBUG: CAnnouncementManager - Announcement: OnPlay from xbmc
19:48:06 T:140440470034368 DEBUG: GOT ANNOUNCEMENT, type: 1, from xbmc, message OnPlay
19:48:06 T:140440470034368 DEBUG: Building didl for object 'pvr://channels/tv/Alle TV-Kanäle/0.pvr'
19:48:06 T:140440470034368 DEBUG: ------ Window Deinit (DialogBusy.xml) ------
19:48:06 T:140438879053568 DEBUG: CDVDDemuxPVRClient::RequestStreams(): added/updated stream 0:5101 with codec_id 28
19:48:06 T:140438879053568 DEBUG: CDVDDemuxPVRClient::RequestStreams(): added/updated stream 1:5106 with codec_id 86019
19:48:06 T:140438879053568 DEBUG: CDVDDemuxPVRClient::RequestStreams(): added/updated stream 2:5102 with codec_id 86016
19:48:06 T:140438879053568 DEBUG: CDVDDemuxPVRClient::RequestStreams(): added/updated stream 3:5103 with codec_id 86016
19:48:06 T:140438879053568 DEBUG: CDVDDemuxPVRClient::RequestStreams(): added/updated stream 4:5105 with codec_id 94209
19:48:06 T:140438879053568 DEBUG: CDVDDemuxPVRClient::RequestStreams(): added/updated stream 5:5104 with codec_id 94215
19:48:06 T:140438879053568 NOTICE: Opening video stream: 0 source: 256
19:48:06 T:140438879053568 NOTICE: Creating video codec with codec id: 28
19:48:06 T:140438879053568 DEBUG: CDVDFactoryCodec: compiled in hardware support: CrystalHD:no OpenMax:no VDPAU:yes VAAPI:yes
19:48:06 T:140438879053568 DEBUG: FactoryCodec - Video: - Opening
19:48:06 T:140438879053568 DEBUG: SECTION:LoadDLL(special://xbmcbin/system/players/dvdplayer/swresample-0-x86_64-linux.so)
19:48:06 T:140438879053568 DEBUG: Loading: /usr/lib/xbmc/system/players/dvdplayer/swresample-0-x86_64-linux.so
19:48:06 T:140438879053568 DEBUG: SECTION:LoadDLL(special://xbmcbin/system/players/dvdplayer/avformat-53-x86_64-linux.so)
19:48:06 T:140438879053568 DEBUG: Loading: /usr/lib/xbmc/system/players/dvdplayer/avformat-53-x86_64-linux.so
19:48:06 T:140438879053568 DEBUG: SECTION:LoadDLL(special://xbmcbin/system/players/dvdplayer/avfilter-2-x86_64-linux.so)
19:48:06 T:140438879053568 DEBUG: Loading: /usr/lib/xbmc/system/players/dvdplayer/avfilter-2-x86_64-linux.so
19:48:06 T:140438879053568 NOTICE: CDVDVideoCodecFFmpeg::Open() Creating VDPAU(1280x720, 28)
19:48:16 T:140440026806016 DEBUG: Suspended the Sink
With Hardware Acceleration disabled in XBMC none of the problems described above occurs.
So does anybody here know how to approach this problem? I'd really like to use Arch on the HTPC. Is this a problem with Arch or shall I look for the cause more on the XBMC side?
Last edited by And1G (2013-08-29 18:05:38)And1G wrote:OK, for everyone who is interested, this problem is most likely caused by XBMC relying on the OpenGL extension GL_NV_vdpau_interop which is not available with the Radeon driver.
I'll go over to the XBMC forums with the issue, I hope they can help.
I followed your from the heise newsticker to here, as you have some fully wrong information.
xbmc implements as the first at all the GL vdpau interop. Which is used to use surfaces in both the decoder, vdpau and the presenter OpenGL. But - we still have all the "pixmap code" in place. So on Radeon vdpau, where this interop is not supported, we render into a pixmap and transfer that result afterwards back to OpenGL.
This works perfectly fine with e.g. mplayer - as the pixmap is the finished result, no need to transfer it any further. Xbmc is something special, cause we are fully 3D - radeon driver (be it GL part or whatever) is damn slow here, cause performance currently just sucks when rendering to pixmap and from there back to OpenGL.
We are in contact with all the AMD OSS devs to find a solution here.
Btw. nvidia ION-2 is fast enough for 1080p50 _with_ the pixmap approach, so you can imagine, that we currently search the issue somewhere else - especially in the AMD drivers.
Edit: On my current radeon vdpau oss tests with xbmc - mesa fills up with memory, leaks and dies after 20 minutes .... not a good situation to start anything.
Last edited by fritsch (2013-09-17 15:20:49) -
Adobe Premiere Elements 10 on Mac OS 10.7.2 - Hanging and Freezing
Hello there,
While I'm not very knowlegable about video editing software, I do use Premiere Elements 10 to edit videos for YouTube. I recently have been able to record using a device which records in 1080i, 29.97fps and saves as an mp4 file format. I've been trying to edit these files (which can be up to an hour long) in Premiere Elements; however, as soon as a video file from this recorder is imported and dragged into the project, it hangs and freezes. Sometimes, the hang happens when "conforming" the video file; other times it happens when trying to preview the video.
My theory is that it is due to the file format, or because of the sheer size of the file. The files can be several GBs.
I have tried to reinstall the program, but this hasn't worked.
Is there any advice you could give me?
Thanks,
LiamWatson28.Hey Bill, thanks for the quick response.
It does use the H.264 CODEC. The project preset I'm using is NTSC-AVCHD-Full HD 1080i 30, although when I import the video to the project, I sometimes get a dialog box telling me that the project settings can be matched to the imported video, which I allow it to do. I have around 250GB of free space on my HDD. I allow the video and audio to conform and such on importing, I do not try to edit the video/audio while it is conforming. I'd also like to add that all files are transferred onto the HDD before the edit.
My specs:
MacBook Pro 13" (Late 2011) running Mac OS 10.7.4 (Lion) I apologise, I had this wrong in the title and the original post.
Intel Core i5 2.4GHz Dual-Core
8GB RAM
500GB SATA HDD
Intel HD3000 Integrated Graphics (if that's any help)
If there's anything else I need to provide, please let me know.
EDIT: I just tested editing a 10 minute video with the same file format and project preset, and, while it was hanging as frequently, it would only be for up to 5 seconds. Compared to the 50 minute video I was trying to edit, the hangs were much longer, sometimes becoming freezes. I know that if there aren't any immediate fixes and using the same video settings, I'll have to reduce the file size by reducing the length of the video, so cutting more frequently rather than recording long stretches.
Thanks,
LiamWatson28. -
My macbook pro is constantly freezing with the rainbow ball of death spinning all the time. I ran Etrecheck. Any help would be much appreciated!
Problem description:
Running slow; constant spinning rainbow ball
EtreCheck version: 2.0.11 (98)
Report generated November 12, 2014 at 2:08:28 PM CST
Hardware Information: ℹ️
MacBook Pro (13-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 2:40:10
Disk Information: ℹ️
Hitachi HTS545032B9A302 disk0 : (320.07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / [Startup]: 318.84 GB (115.79 GB free)
Core Storage: disk0s2 319.21 GB Online
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[running] com.adobe.AdobeCreativeCloud.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[invalid?] com.citrixonline.GoToMeeting.G2MUpdate.plist Support
[loaded] com.google.keystone.agent.plist Support
[running] com.microsoft.LaunchAgent.SyncServicesAgent.plist Support
[invalid?] com.nero.HSMMonitor.plist Support
User Login Items: ℹ️
iTunesHelper UNKNOWNHidden (missing value)
Microsoft Database Daemon Application (/Applications/Microsoft Office 2011/Office/Microsoft Database Daemon.app)
VMware Fusion Start Menu UNKNOWN (missing value)
„Google“ diskas Application (/Applications/Google Drive.app)
Internet Plug-ins: ℹ️
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 Support
FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
Default Browser: Version: 600 - SDK 10.10
Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
CouponPrinter-FireFox_v2: Version: 1.1.10 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.5 - SDK 10.6 Support
DirectorShockwave: Version: 12.1.3r153 - SDK 10.6 Support
JavaAppletPlugin: Version: Java 7 Update 51 Check version
User Internet Plug-ins: ℹ️
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
3rd Party Preference Panes: ℹ️
Flash Player Support
Java Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
23% firefox
9% Microsoft Outlook
3% WindowServer
1% mdworker32
1% mds
Top Processes by Memory: ℹ️
258 MB firefox
155 MB mds_stores
137 MB Microsoft Outlook
133 MB softwareupdated
94 MB Microsoft Excel
Virtual Memory Information: ℹ️
169 MB Free RAM
1.38 GB Active RAM
1.19 GB Inactive RAM
1.15 GB Wired RAM
6.52 GB Page-ins
37 MB Page-outsLaunch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
10.5.3 update: Finder pegs CPU at 100% and RAM at almost 100%
Ever since my update to 10.5.3 Finder goes nuts causing the CPU to max out and RAM usage to nearly max out, sometimes for hours at a time. I have searched high and low on the discussion boards and there is some chat but no fixes for my situation. This happens right after login with no apps other than background apps running. This never happened with Tiger and only happened for very short periods of time with Leopard prior to the 10.5.3 update. Disabling Finder is an option but its like cutting your arm off because it hurts for a few hours a day and no doctor can cure it. Not a good option.
Have you tried reinstalling using the [10.5.3 combo update|http://support.apple.com/kb/index?page=search&src=support_site.home&q=10 .5.3%20combo%20updater]?
Sometimes doing this will cure anomalies. You might also want to reset your SMU by shutting the computer down, pulling all the peripherals off and then disconnecting the power cord. Wait 15 seconds, reconnect the cord, then turn the computer on again.
Please post back with results, -
Firefox hangs and freezes the moment i start it.
Firefox hangs and freezes the moment i start it (9 out of 10 times it freezes). I have reinstalled it but still it freezes. I removed the antivirus (avira) and firewall (comodo) but no change. Can't even enter safe mode it hangs.
os win7 x64, amd fx 8350m 8gb ram, firefox version 20Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us! -
IBM OS ISSUE: SYSTEM HANG WITH JFS2 AND HEAVY LOAD
제품 : ORACLE SERVER
작성날짜 : 2004-11-24
IBM OS ISSUE: SYSTEM HANG WITH JFS2 AND HEAVY LOAD
==================================================
PURPOSE
이 문서는 IBM AIX5L OS 상에서 Arch Process가 online redo log
를 release하지 못하고 OS의 kill 명령으로 kill조차 되지 않을 경우
조치 방법이다.
Problem Description
이 문서는 다음 OS 정보와 Oracle version인 경우에 해당한다.
Oracle Server - Enterprise Edition - Version: 9.2.0.5.0
Oracle Server - Enterprise Edition - Version: 8.1.7.4.0
AIX5L Based Systems (64-bit) or (32-bit)
문제 발생 당시의 증상은 다음과 같다.
- arch-process doesn't release redolog files
- arch-process doesn't die after database shutdown
- arch-process can't be killed
genclntsh 수행 시 hang 상태이다.
(sleeping...)28590: kwaitpid(0x2FF22470, -1, 4, 0x00000000, 0x00000000)
또는 이 문제로 인하여 ORA-600[2103] 에러가 발생하기도 한다.
이 에러가 발생하는 원인은 IBM AIX5L 64bit, 32bit OS 이슈에 있다.
IBM OS issue: SYSTEM HANG WITH JFS2 AND HEAVY LOAD.
Workaround
none
Solution Description
OS AIX5L ML4.0(5.2.0.40)의 bos.up / bos.mp / bos.mp64 fileset level을
갖는 JFS2 file system을 갖는 경우에 해당한다.
AIX 5.3 APAR IY59387은 IY58143에 포함되어 있다.
JFS2 file system에 Heavy I/O activity가 발생하면 database process에
HANG 문제를 야기시킬 수 있다. 이 때 database process가 kill -9
명령으로 kill되지 않는다. 데이타베이스를 SHUTDOWN하여도 Process가
계속 살아 있게 된다.
Process에게 SIGKILL 함수가 issue되었지만 영향을 주지 않게 된다.
Process를 제거하는 유일한 방법은 OS를 reboot하는 것이다.
문제를 예방하는 방법은 IBM APAR-FIX IY59082 를 적용하는 것이다.
이 APAR는 bos.64bit 5.2.0.42에 포함되어 있다.
Fix :
Need to install the IBM APAR-FIX IY59082, this APAR is included on
bos.64bit 5.2.0.42.
(주) IBM 엔지니어에게 확인 결과 이 Patch 안에 AIX5L 32bit 용과 64bit
용이 모두 포함되어 있는 것으로 확인됨.
Reference Documents
<Note:285158.1>b,
The install was from my original Dell XP Pro-SP1 'Reinstallation' CD along with the complete MS XP-SP2 download that I burned to another CD. I also had all the latest Dell drivers from their website burned to a CD. Install went as follows:
- Format HD
- Install XP Pro SP1
- Install SP2
- Install Dell Drivers
- Obtain any MS patches from their site
- Install Office
- Update Office from the MS website
- Install iTunes
- Tweak MS settings
- Install many software programs
- Make an interim Image of system and store to ExHD
- Install other software programs (mostly security programs)
- Make another 'complete' Image to ExHD
- Restore backup data and music
After additional testing last night, I determined that it is not iTunes at all (or to blame). I get intermittent hangs/freezes/pauses in other media players (WMP, etc.).
Seems that something is causing the 'System' process to periodically jump up in CPU %age (though not more than 30-50%). Even this relatively small amount is enough to pause the playback of music or video, hang the mouse movement for a brief moment, or delay a menu opening. All very subtle - you have to be looking for it to notice (except with real-time audio-video, which is quite noticeable whenever this happens).
I had this problem a year ago, which is why I reimaged then and stayed with SP1 on the advice of Dell and Webroot. I'm stumped as to where to look for the culprit. Every time I go back to the original HD with SP1, everything runs smoothly. Some sort of system call is generating this complete pause....
I'll be limited in my Internet ability for the next several days, so I may be out of touch until Friday. I'll keep testing and playing with the limited equipment I take along....
Any thought you or others want to toss out, I'll attempt when possible.
Thanks!
Maybe you are looking for
-
we have a Linux fileserver with Samba share and have several users. The users tend to be in different locations and need to login at different workstations, sometimes the workstation may be WindowsXP and othertimes it is windows7. How can we use Fire
-
where do I find my Subscription ID or License for my Acrobat Pro cant seem to get passed trial pop up window
-
Problem in table entry deletion
Hi i have deleted table entry in VBRK and vbrp is there any facility to get back the deleted entry . pls let me know
-
Hello.. For a while now I've been wondering at the finder status bar, it's reporting that there are 684gb of space available. I am currently on a 750gb hard drive and I know for a fact I have more than 150gb of data on my machine. I went into about t
-
After each update, I'm forwarded to your website so that you may thank me. I do not want you to thank me. I hate adobe and i hate flash, i use it because i have to. I hate it because of the common sense adobe lacks, to simply not automatically open m