Hangs and was rebooting also previously

I had purchased HP Pavilion dv2401tu Notebook PC one and half year back . Now from past 2 months i m facing problem.Firstly it use to hang and restart giving memory accesing issue when i use to open more than one or 2 windows.Now i realised that could be problem of the insufficient RAM for vista,so i upgraded the RAM to 2Gb.Now the PC is hanging and not responding.It also shut down after some time or i had to force fully shut it down.Please let me know what is the issue.

Hi,
First of all I would suggest that you try to reinstall the system to see if it gets better. You can do this using PC Companion:
http://www.sonymobile.com/update
In PC Companion, press start on Support Zone > Start on Update the phones software > "Repair phone".
Before repairing the software in your device you may want to backup your information first. Check out this topic for more information on how to:
http://talk.sonymobile.com/t5/FAQ/Backup-amp-Transfer/m-p/407253#U407253
What are your thoughts about this forum? Let us know by doing this short survey.

Similar Messages

I bought 2nd hand iPhone and was linked with previous owner. I want to contact him but i didn't get any address of him. How can iget his/her email address using that iphone IMEI or you know any idea... Please reply if you know solution .....

I bought 2nd hand iPhone and was linked with previous owner. I want to contact him but i didn't get any address of him. How can iget his/her email address using that iphone IMEI or you know any idea... Please reply if you know solution .....

There is no solution here and you should already have known this as you replied to a thread all about this a few up from your own post and this stated the postition quite clearly and the question was answered.
Why do you ask the same question again? The first answer is not going to change just because you don't like it!!

RAC Node hang and unexpected reboot

Hello friends
We are facing the intermittent issue of node hang and unexpected shutdown of node. This is 2 node rac 10.2.03 running on windows 2003. Here's crsd.log
2009-07-16 17:24:03.058: [ OCRMSG][5252]prom_rpc: CLSC recv failure..ret code 7
2009-07-16 17:24:03.058: [ OCRMSG][5252]prom_rpc: possible OCR retry scenario
2009-07-16 17:24:03.058: [ COMMCRS][5616]clscsendx: (0000000002AF5C60) Physical connection (0000000003892080) not active
2009-07-16 17:24:03.058: [ OCRMSG][5616]prom_rpc: CLSC send failure..ret code 11
2009-07-16 17:24:03.058: [ OCRMSG][5616]prom_rpc: possible OCR retry scenario
2009-07-16 17:24:03.105: [ COMMCRS][5252]clscsendx: (0000000002AF5C60) Connection not active
2009-07-16 17:24:03.105: [ OCRMSG][5252]prom_rpc: CLSC send failure..ret code 6
2009-07-16 17:24:03.105: [ OCRMSG][5252]prom_rpc: possible OCR retry scenario
2009-07-16 17:24:03.105: [ COMMCRS][5616]clscsendx: (0000000002AF5C60) Connection not active
2009-07-16 17:24:03.105: [ OCRMSG][5616]prom_rpc: CLSC send failure..ret code 6
2009-07-16 17:24:03.105: [ OCRMSG][5616]prom_rpc: possible OCR retry scenario
2009-07-16 17:24:03.152: [ COMMCRS][5252]clscsendx: (0000000002AF5C60) Connection not active
2009-07-16 17:24:03.152: [ OCRMSG][5252]prom_rpc: CLSC send failure..ret code 6
2009-07-16 17:24:03.152: [ OCRMSG][5252]prom_rpc: possible OCR retry scenario
2009-07-16 17:24:03.168: [ COMMCRS][5616]clscsendx: (0000000002AF5C60) Connection not active
2009-07-16 17:24:03.168: [ OCRMSG][5616]prom_rpc: CLSC send failure..ret code 6
2009-07-16 17:24:03.168: [ OCRMSG][5616]prom_rpc: possible OCR retry scenario
2009-07-16 17:24:03.215: [ COMMCRS][5252]clscsendx: (0000000002AF5C60) Connection not active
2009-07-16 17:24:03.215: [ OCRMSG][5252]prom_rpc: CLSC send failure..ret code 6
2009-07-16 17:24:03.215: [ OCRMSG][5252]prom_rpc: possible OCR retry scenario
2009-07-16 17:24:03.215: [ COMMCRS][5616]clscsendx: (0000000002AF5C60) Connection not active
2009-07-16 17:24:03.215: [ OCRMSG][5616]prom_rpc: CLSC send failure..ret code 6
2009-07-16 17:24:03.215: [ OCRMSG][5616]prom_rpc: possible OCR retry scenario
2009-07-16 17:24:03.261: [ COMMCRS][5616]clscsendx: (0000000002AF5C60) Connection not active
2009-07-16 17:24:03.261: [ OCRMSG][5616]prom_rpc: CLSC send failure..ret code 6
2009-07-16 17:24:03.261: [ OCRMSG][5616]prom_rpc: possible OCR retry scenario
Please throw me the light, what may be issue.

I suggest you install [ IPD/OS|http://www.oracle.com/technology/products/database/clustering/ipd_download_homepage.html] on you cluster. This will give you all the relevant OS statistics so when a node reboot happens, you can figure out what the state of the nodes was at that time and then fix the problem. The hang is often caused by something other than Oracle RAC.

Revenue recognition job hangs and needs reboot of servers

We are on SAP BPC v7.0 SP6.1, using Microsoft Office 2007 and Internet Explorer 7. We have two environments - Production and QA. Production so far is running fine; QA is on a smaller environment.
I am an application user and load final production files into QA each month. For the past two months when trying to run the revenue recognition job for April 2010 and again for May 2010, the job just hangs where it would normally take about two minutes to complete. Both times it was the only job running at the time, as no one was using the QA environment. I had to terminate the job (which might leave the job running in the background) and have our Server team reboot our two servers (Application and SQL Server Analysis Services). Then the revenue recognition job completes.
Depending if I terminate and resubmit the revenue recognition job, I might get the following detail log message:
Execute formulasError
Failed to commit transaction
1 errors writing data
Send through SendGovenor failed
Last week, our DBA set the QA databases to Simple instead of Full recovery and shrank the transaction log files. I ran a test revenue recognition for July 2010 and the DBA tried to monitor the environment, but he could not see any job committing or any activity on the database. I ended up rebooting our servers to complete the test.
Has anyone experience similar problems and was able to resolve it. Any ideas would be appreciated. Thanks.
Bucky

Hi Sorin Radulescu,
I load the initial billing file using the Import logic script and select the data file and transformation file. I click on the Merge data values option; click No to run default logic; and click No, do not check work status settings. Once the import completes, I run the revenue recognition logic for the accounts and periods I am working with.
I compared our Production transformation file, default logic script (which I am not running), and revenue recognition logic script to QA and they both match. My problem is when I run the exact same revenue recognition job in QA, the job just sits in running status but should finish in a couple of minutes. I would let it run for a couple of hours in QA, then terminate the job and have our two servers rebooted, then the same revenue recognition job runs to completion within a couple of minutes.
I am just wondering if there could be some other setting that does not let the job submission kick off the actual update to the database. To make sure the database was not hosed from the terminated revenue recognition job, I ran a different but smaller job and it completed. Then I would ask for the reboot and resubmit the revenue recognition job and it completes.
I will let our DBA know about monitoring the dllhost.exe for amount of memory used. But the last time he tried to check for any activity on the database he could not see anything, but I do not know if he was checking dllhost.exe or some other files.
Thanks for your response and suggestions. Since this is our QA environment (which I try to keep current with Production), I am trying to see if I can identify the cause and fix it, in case it carryover to our Production environment.
Regards,
Bucky

[SOLVED] Umount filesystem that went offline and was rebooted

Here is my scenario:
I have a an existing directory /mnt/example that a mount is attached to via fstab at boot time. The mount in fstab points to a Windows IIS directory.
That works all well and good, but what happened over the weekend was that the Windows machine the mount was pointed to had to be restarted.
This effectively stopped my mount point on the Linux machine and I as unable to read it at all or umount it even with the -f option. It just told me the device was busy.
I had reboot my Linux machine to clear things up.
Should there have been I should have tried before rebooting my Linux machine?
Thanks for the info!
Last edited by proof (Yesterday 17:28:13)

Spider.007 wrote:Is this a network based mount? What protocol do you share it with, samba? Did you try un/remounting on the linux machine?
The mount on the Linux machine was pointed to an admin share on the Windows machine. When the Windows machine rebooted, it caused the Linux mount to become unstable in such a manner that I could not list the directory the mount point existed in, I could not umount it (device busy error) and I could not even perform a simple 'df' command. df or a directory listing caused the terminal window to hang. The only thing that fixed it was a reboot of my Linux machine to re-establish the mount from fstab.

Does ipad air hang and need reboot often?

I found Ipad Air requires frequent reboot. Does any one else face this issue. I used Ipad 1, 4 but none had such issues in past

My iPad air does not restart or require a restart. Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

4s camera get hang and mobile phone also after updating to ios 8.2

This is the worst issue I'm facing.
I have restarted many times.. forcely closed camera app. but no progress.
Further more we cant downgrade its version.
Plz Do something Apple Staff.

See this article. If restoring doesn't help, there is a hardware failure.
Use iTunes to restore your iOS device to factory settings

Every time I try to uninstall firefox a window pops up and says that a previous upgrade was unsuccessful and I need to reboot. I have rebooted several times, I

every time I try to uninstall firefox a window pops up and says that a previous upgrade was unsuccessful and I need to reboot. I have rebooted several times, I have downloaded a "fresh version" and installed it. It won't uninstall. Someone please help!!

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
''(If you're using an added theme, switch to the Default theme.)''
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
[[Image:FirefoxSafeMode|width=520]]<br><br>
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.
Thank you.

After upgrading to ICS my Xperia mini (ST15i) hangs and reboot itself?

Ah I was very happy after getting official ROM of ICS but my happiness goes down very soon because now I'm facing many problems with my phone.
It is hanging most of the time at least once or twicw in a day, sometime hangs and reboot itself but sometime I have to estart it by remove the battery. When it hangs if my battery is at 90% and I remove the battery and put it back and restart it then it goes down to near about 70% or less.
Phone dial pad is very slow to open than 3rd party softwares. Back and Option key response very slow. I know this could be performance issue but this is too much.
However many apps goes to hang, mostley my browsers I wa using Boat and Dolphin HD browser and after upgrading I tries Chrome which also hangs. My phones battery drain so fast now also my phone heat too.
I tried to contact the support thorugh E-mail but still yet no reply so I'm here to ask this please help me guys. I have very slow bandwidth so please suggest me the good way to solve this problem. I don't want to downgrade but if its neccessary then I'll.

regarding the phone/dialer download Dialer One
regarding your battery life, you should check which apps are causing this
charge your phone 100% use it as you normally would then once it reaches 10%
settings > battery > take screenshots of this list an the graph, also tap on each item and take screenshots post them here
delete taskillers, antivirus, battery apps, ram apps as they slow down your phone, drain your battery and cause a lot of issues.
Don't forget to mark the Correct Answers & Helpful Answers
unrelated topic, if you have some time please check this thread
http://talk.sonymobile.com/thread/44888
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

N95 Hanging and Rebooting

Recently i bought New N95 and i updated firmware V20. after updated, my system hanging sometimes and rebooting automatically when i using the phone, and back camera not working properly

21-Dec-2007 07:40 PM
chrissey wrote:
I have the same problem too...
Phone hanging and rebooting after the use of some applications like, for example:
- video recording, the phone stops recording and reboots or stops "processing video" and reboots
- "Global race" game. It runs for a few seconds or minutes then reboots
- Wifi surf: after some time, reboots
I recently updated the phone to V20, before with the V12 the phone was running fine.
Of course I have "hard resetted" my phone two times, and re-applied the V20 update one time.
I've also re-formatted my two memory cards with the phone.
All of that with no success. Before I had a N70 and never have this kind of problem.
I seriously think It's a V20 issue. Is there any possibility to let it know to Nokia itself, for confirmation and correcting it in a future f/w release ?
I think you need to take it badly to nokia care points.

Recently Got a Mac Book and was wondering if there is any software that Apple recommends to import my music/pics/video from my Iphone onto my computer. I no longer have the previous compture and if I sync my Iphone I'll lose everything.

Recently Got a Mac Book and was wondering if there is any software that Apple recommends to import my music/pics/video from my Iphone onto my computer. I no longer have the previous computer and if I sync my Iphone I'll lose everything.

This is the iTunes for Windows forum...
You should be able to:
Backup the device to the new windows installation
Transfer your purchases into a newly authorized library
Recover any other media using third party tools as suggested in this post from forum regular Zevoneer
Restore the device from the backup
This process should switch the association of the device to the new library, preserving the data and settings in your apps.
May also be prudent to attempt a backup to iCloud directly from the device before you start... Settings > iCloud > Storage & Backup > iCloud Backup > On. It won't save any media but it would preserve the general account settings and documents in case anything goes wrong while you are trying to extract your other data.
When you get it all fixed, make a backup! (Windows tip). For a Mac use Time Machine or Carbon Copy Cloner.
tt2

My iPod touch (4th gen) won't charge. It died as I was rebooting the system. It showed the screen that let me know it was charging, but no progress was made. And now the screen won't even turn on.?!?!?! Does any have any advise???

My ipod touch died as I was rebooting the system. It won't charge?!?!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
It includes how to place in recovery mode

Just bought a new iphone4 and was loading os6 and now it won't turn on. the apple glows like it is starting up, then the screen goes black and then repeats the same process over and over. i have tried to reboot multiple times now

just bought a new iphone4 and was loading os6 and now it won't turn on. the apple glows like it is starting up, then the screen goes black and then repeats the same process over and over. i have tried to reboot multiple times now

I am assuming the phone was working prior to you installing IOS 6? Did you use itunes to install IOS 6 or just run from the phone?
When I tried to do the Over The Air update to IOS6 on my iPhone 4, it errored out and I had to connect it to iTunes and select "Restore" from the summary screen after iTunes finds the phone is connected. If this works for you, it will go through a couple of reboots that take a few minutes to complete. It should then give you the option to start with a fresh new phone or to use one of your previous backups to load your contacts and other information, provided you have backed up the phone previously.
I hope this helps you my friend!

My computer locked-up, and when rebooted, my itunes library was gone, replaced with a brand new library. Fortunately, my 450 GB iTunes library is still on the computer. Question is how do restore my original library without having to reload folders? Tks

Help! My computer locked-up and had to be rebooted. However, when I restarted it and hooked up my iPod, I noticed my existing iTunes library (all 450 GB of it) was GONE and was replaced by a brand new library. Fortunately my old, 450 GB library is still on my hard drive under iTunes in Windows Explorer. How or why could this have happened, and most importantly how can I restore my old libary without having to manually import allow of my music and hundreds of Podcasts and 16000+ podcast files?
Thanks for any help....

What you're describing is the expected behaviour. I believe though that is also is the easiest way to have all the contents available to both of you at all times. If you have a spacious hard drive you should probably allow this to happen as anything else will be harder to manage.
My suggestion would be the following if you want to try something different.
Store all your music at a location that is accessible by both of you — an example would be to use your Public Folder as the locations where iTunes will go and look for all the media files—. Your wife does have access to it.
In the Finder you will need to move the folder name iTunes Music to the location in your Public Folder (see above). Once that's done, you and your wife will have to go into the iTunes Preferences > Advance Preferences and un-check Copy files to iTunes Media folder when adding to library. From this point on, you can continue to use iTunes as usual. You'll need to tell your wife what has been newly downloaded/imported into your iTunes so she can manually go look for those items in that Public Folder iTunes of yours and import them into her iTunes. She will not duplicate by doing that, but, like I say this is an all-manual work.
She can do the same, so you have access to contents she imported herself. One more downside of this is that both usernames have to be active in your iMac. If yours isn't, she won't be able to access any item (song, book, app) located in your Public Folder's iTunes.
I'm sure there's a way, if you have an router with external hard drive conectivity, for both of you to be able to access —independently— the iTunes Media at all times but I was just reading at another post that doing so can further complicate things.
Hope this helps. Please let me know what you think or decide to do.
Jorge...

Messages app is not sending alerts in ios 8 is also hanging and crashing very glitchy

Updated to ios 8 yesterday and noticed that messages were appearing in my messaging app, but no chime or alert badge was appearing. yes i did check do not disturb, it was off, the sound was on and alerts were also turned on.
i've also noticed the messages app is crashing about 50% of the time and is hanging every time i use it. i'm going to backup and restore now. wish me luck.
anyone else having problems?

This was the final step in a series of attempts and it finally worked for me... finally after an hour or two of reading every post I could find on getting repeat alert notifications. I closed the app (double clicking home and pressing the red circle with the white line in it which turned off the messages app). Then I held the home and off button until the apple came on... I had also reset the DNS service numbers to 8.8.8.8,8.8.4.4: I also made sure that the badge icon was on, a sound was selected and I had it turned to repeat alert 3 times. When I tested after doing all these things the repeat worked. I decided I wanted to turn it to repeat 10 times and it didn't work.... so I held the home and off button at the same time and it reset so that the alert repeats 10 times. Perhaps the combination of all these these things did the trick, or maybe it was just the home and off button reset...

Hangs and was rebooting also previously

Similar Messages

Maybe you are looking for