Hangs at Creating Domain of PFRD 11g Configuration

Could anyone help please?
I'm trying to install PFRD 11g, following, "Oracle® Fusion Middleware Installation Guide for Oracle Portal, Forms, Reports and Discoverer 11g Release 1 (11.1.1)"
On a Red Hat Linux Enterprise 5 - 32bit server, successfully installed Weblogic and PFRD (Portal/Forms/Reports/Discoverer) 11g (install only type). Then run config.sh to configure the PFRD instance. However, the configuration hangs at Step 11 of 12, Creating domain.
The server has 6 GB physical memory and out of it, 5 GB memory is free.
Below is the last few entries of the installation log
====================
Executing Task: Creating Domain
XXX: adding task: oracle.as.install.classic.ca.standard.DomainProvisioningTask
AdminServer port is 7001
trying to connect to srvrh5s1 7001
Creating Weblogic Domain.
isPortAvailable [port 5556]
Port 5556 available.
Adding Template : /u01/Oracle/Middleware/oracle_common/common/templates/applications/jrf_template_11.1.1.jar
Adding Template : /u01/Oracle/Middleware/as_1/common/templates/applications/classic_template_11.1.2.jar
CLASSPATH=/u01/Oracle/Middleware/patch_wls1032/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/u01/Oracle/Middleware/patch_oepe1032/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/u01/Oracle/Middleware/jrockit_160_14_R27.6.5-32/lib/tools.jar:/u01/Oracle/Middleware/utils/config/10.3/config-launch.jar:/u01/Oracle/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/u01/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/u01/Oracle/Middleware/modules/features/weblogic.server.modules_10.3.2.0.jar:/u01/Oracle/Middleware/wlserver_10.3/server/lib/webservices.jar:/u01/Oracle/Middleware/modules/org.apache.ant_1.7.0/lib/ant-all.jar:/u01/Oracle/Middleware/modules/net.sf.antcontrib_1.0.0.0_1-0b2/lib/ant-contrib.jar:
PATH=/u01/Oracle/Middleware/wlserver_10.3/server/bin:/u01/Oracle/Middleware/modules/org.apache.ant_1.7.0/bin:/u01/Oracle/Middleware/jrockit_160_14_R27.6.5-32/jre/bin:/u01/Oracle/Middleware/jrockit_160_14_R27.6.5-32/bin:/u01/Oracle/Middleware/as_1/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/oracle/bin
Your environment has been set.
CLASSPATH=/u01/Oracle/Middleware/patch_wls1032/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/u01/Oracle/Middleware/patch_oepe1032/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/u01/Oracle/Middleware/jrockit_160_14_R27.6.5-32/lib/tools.jar:/u01/Oracle/Middleware/utils/config/10.3/config-launch.jar:/u01/Oracle/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/u01/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/u01/Oracle/Middleware/modules/features/weblogic.server.modules_10.3.2.0.jar:/u01/Oracle/Middleware/wlserver_10.3/server/lib/webservices.jar:/u01/Oracle/Middleware/modules/org.apache.ant_1.7.0/lib/ant-all.jar:/u01/Oracle/Middleware/modules/net.sf.antcontrib_1.0.0.0_1-0b2/lib/ant-contrib.jar:::/u01/Oracle/Middleware/wlserver_10.3/common/eval/pointbase/lib/pbembedded57.jar:/u01/Oracle/Middleware/wlserver_10.3/common/eval/pointbase/lib/pbclient57.jar:/u01/Oracle/Middleware/wlserver_10.3/common/eval/pointbase/lib/pbtools57.jar
Initializing WebLogic Scripting Tool (WLST) ...
====================
Also, on the other part of the same log, I found the followng entry
Assigning Port: -1 to: NODE_MANAGER_PORT
Edited by: larry24680 on Mar 21, 2010 6:34 PM

Experienced a similar hang at Creating Domain step on another platform. Resolved when I installed without the option to include JRockit.

Similar Messages

  • Oracle Portal 11g installation hangs while creating domain

    I have patched the oracle portal 11.1.1.2 to 11.1.1.6 in Window 7 and tried to configure the oracle portal but the installation hangs while creating domain.
    Just realised Window 7 does not support Oracle Portal 11g.
    Edited by: user12063924 on Jul 5, 2012 11:58 PM

    Dear Oracle Oracle BI Software,
    This software is a big puzle for end users and it is really wasting our time in try and error scenarios. admit it with us and don't hide behid curtains. Well did u follow the Guides in the Book ? Yes Yes i followed and it is still showing errors .. in the name of God inform the Development Department to manage the setup .. i configured everything fine and what is really funny that after it loads 100 % it discovers that it can't create domain. sorry i m not a master Guy, but before the installtion it should validate for us if everything is ok and can be lauched not to do 1 hour workshop and cover out at the end of the movie that there is an error.
    Guy put this product in the shelf until next release
    Thank You

  • OBIEE 11.1.1.7.0 installation hangs at Creating Domain

    I am trying this installation for N times...Windows 7 professional environment, 6Gb memory.
    Did several tries suggested by forum and web... like temp directory env variable is C:\TEMP and C:\TMP, disabled antivirus, installed java 6 at c:\Java, installed JRockit at c:\Java... Disable the sleep time, etc... and always hangs at the creating domain. Task Manager shows java and  javaw with 0% CPU..
    Loopback is installed and ok. Tried with Simple install and Enterprise Install.
    I just checked the Cookbook: Installing and Configuring Oracle BI Applications 11.1.1.7.1 and it does not mention at issue at Enterprise Installation...
    Pls. any hint or help ?
    Txs. I appreciate.
    Antonio

    you don't need to install Java, as Java is part of the installables.
    You might need to check whether your installables are not corrupted.
    you don't need to set any env variables too. if you have created them, remove them.
    is your machine 32 or 64 bit. what you are installing is it 32 ro 64bit do they match with the machine?
    do you have a data base and is the RCU installed? ( if you are trying enterprise install)
    for every fresh install, drop and recreate RCU schemas.
    do you have Administrator access to your machine? with out this OBIEE will not be able to create folder etc.
    Run the installation batch file as Administrator.
    let me know your updates

  • [Win XP Development] Configure Classic Instance hanging on "Create Domain"

    I've installed wls 10.3.5 on a Windows XP SP 3 platform. It's up and running.
    I used the install-- do not configure option for Forms/Reports 11.1.2.
    Now, I'm trying to configure this Windows machine for development.
    I've shortened all the paths.... e.g. c:\Oracle\Middle and c:\Java and using c:\temp for temporary directories to avoid the pesky tilde issues.
    I have 3GB of RAM to work with. I've even tried to make the task easier by just configuring Forms instead of both Forms and Reports.
    I've even configured a Windows loopback connection and rebooted the machine, and deinstalled Forms and WLS and re-installed to use the loopback address.
    I used to get crashes, now I get hanging that times out after a few hours if I let it go on.
    Any breakthrough tips or suggestions? Oracle Support has an SR open on this for 3 weeks, but they are swamped and stumped.
    Edited by: steve_newguy on Feb 23, 2012 1:29 PM. Corrected type of installation. Meant to say development instead of deployment option.

    Is there a particular reason you want to do the Deployment config on your XP machine? Windows XP cannot be used for remote access or multi-user access. On XP your only option is single user, local access only. Basically for local designtime only. So the only thing you really gain by doing the Deploy option is an opportunity to become familiar with it. Also, although it doesn't have anything to do with your current problem, 3gig isn't going to be enough to do a Deploy install and expect to not pull your hair out while waiting for the hourglass to stop spinning each time you do something. Don't get me wrong... it will run, but very sloooowly.
    Ok, on to your problem. In most cases, a hang during the config part of the install suggests a problem starting a process, usually opmn. You were on the right track when you said you installed the loop back adapter. If you look closely at the install and config logs, you likely will see that opmn was unable to start. If this is the case, I would bet my money on the net configuration. Just installing the loopback adapter is only part 1 of the steps needed. Also, this is ONLY needed if the machine is using DHCP. Do not do this if it uses a static address.
    If you have an opportunity to start from scratch I would recommend it. Here is my suggestion, starting with cleanup:
    1. Stop all running services and processes related to this Oracle installation. That includes WLS, Node Manager, OPMN (Windows Service), etc
    2. If possible, use the Shortcut created to perform an uninstallation of FMw
    3. In Add/Remove Programs, uninstall WLS
    4. In the system environment variable settings, remove ALL references to FMw or WLS. Look closely at PATH in particular. (My Computer > Properties > Advanced > Environment Variables)
    5. This one is important. You need to remove the Windows Service created for OPMN related to this installation. I would explain how to do this directly in the Registry, but that might get messy. I found the following which explains how to do it from the command line.
    http://www.howtogeek.com/howto/windows-vista/how-to-delete-a-windows-service-in-vista-or-xp/
    6. Once you have completed all these steps, reboot.
    7. After rebooting, delete any remaining directories related to FMw and WLS. Don't forget the C:\bea that may have been created.
    8. Assuming loopback has been installed, open the system's hosts file in a text editor. Found in C:\WINDOWS\system32\drivers\etc
    9. Add the loopback address and hostname. Be sure you have not created duplicates. In other words, ensure that the localhost address does not reference the hostname. Your entries should look something like this.
    127.0.0.1       localhost
    # Replace the address and hostname below with your loopback address and hostname
    192.168.0.10  yourMachineName10. Reboot
    11. Install WLS 10.3.5. At the end of the installation you will see a check box for running Quick Start. UNCHECK this box before exiting as there is no need to run this.
    12. Install FMw 11.1.2.0. You can choose either Install Only or Install and Config. There really is no reason to not choose Install and Config.
    I do not recommend trying to have both a Deploy and Development installation type. If you need the Builders and would like to use the Deployment install type, simple be sure to select the Builders during the install process. The Builders are available in both installation types.

  • Created Domain failed, Forms 11.1.2.1 on Win7

    Hi
    Hope to hear any advice.
    Trying to install WLS10.3.6 + Forms11.1.2.1 on Windows7 32bit.
    But facing error and failed to Create Domain.
    Please let me know cause of this error.
    Total Physical Memory:     3,255 MB
    Available Physical Memory: 2,065 MB
    Virtual Memory: Max Size:  6,508 MB
    Virtual Memory: Available: 5,063 MB
    Virtual Memory: In Use:    1,445 MB
    - nodemanger stoped
    - no space or () in PATH
    - set C:\TMP
    - intall user is not Admin user, but grant Admin priviledges
    - Virus Scan set off before config
    If this may cause of not enough memory, please let me know how to check not enough memory.
    Need to evidence for this
    Error: addTemplate() failed. Do dumpStack() to see details.
    oracle.as.provisioning.exception.ASProvWorkflowException: Problem invoking WLST - Traceback (innermost last):
      File "C:\TMP\tmp1381374081295.py", line 45, in ?
      File "C:\TMP\WLSTOfflineIni3175891067729527083.py", line 89, in addTemplate
      at com.oracle.cie.domain.script.jython.CommandExceptionHandler.handleException(CommandExceptionHandler.java:51)
      at com.oracle.cie.domain.script.jython.WLScriptContext.handleException(WLScriptContext.java:1538)
      at com.oracle.cie.domain.script.jython.WLScriptContext.addTemplate(WLScriptContext.java:420)
      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
      at java.lang.reflect.Method.invoke(Method.java:606)
    com.oracle.cie.domain.script.jython.WLSTException: com.oracle.cie.domain.script.jython.WLSTException: com.oracle.cie.domain.script.ScriptException: unable to parse "template-info.xml" from template jar "D:/ICF_AutoCapsule_disabled/Oracle/Middleware/Oracle_FRHome1/common/templates/applications/classic_template_11.1.2.jar
      at oracle.as.provisioning.weblogic.ASDomain._createDomain(ASDomain.java:2958)
      at oracle.as.provisioning.weblogic.ASDomain.createDomain(ASDomain.java:2476)
      at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:633)
      at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
      at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
      at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
      at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
      at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
      at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
      at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:371)
      at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
      at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
      at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
      at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:64)
      at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:160)
      at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
      at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
      at java.lang.Thread.run(Thread.java:662)
    oracle.as.provisioning.exception.ASProvisioningException
      at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
      at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
      at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
      at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
      at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
      at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:371)
      at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
      at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
      at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
      at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:64)
      at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:160)
      at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
      at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
      at java.lang.Thread.run(Thread.java:662)
    Caused by: oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
      at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:686)
      at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
      at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
      ... 13 more

    Actually, it is recommended to install Forms 11.1.2.1 with WebLogic 10.3.6 as this allows you to use Java 7, the most secure Java version to date where WebLogic 10.3.5 only allows Java 6. I have done dozens of Forms 11.1.2.1 installations using WebLogic 10.3.6. From these installs, I have found a couple other root causes to the problem that you have not noted that you tried yet. I'll post some ideas below:
    Check to see if your PC or server name contains any underscores “_”. This has been known to cause domain creation failures. Try modifying your PC or server hostname to remove any underscores (the best recommendation would be to only use alphanumeric characters and hyphens). NOTE: A PC/server reboot will be required to activate this change.
    Example of a bad hostname: oracle_server123.oracle.com
    Example of a good hostname: oracle-server123.oracle.com
    Verify the admin user permissions your account has by going to %MIDDLEWARE_HOME%\user_projects\domains\%DOMAIN_NAME%\config\fmwconfig\bootstrap and try to open cwallet.sso using Notepad (the file is not text-friendly, but this can be used as a quick test). If you happen to get permission errors, try the following steps:
    Go to the location where your Oracle folder is located. (Example: C:\Oracle)
    Right-click on the Oracle folder and select Properties.
    Select the Security tab and select the Administrators group. NOTE: Make sure your user account you are using is the same one who installed WebLogic and the Forms/Reports binaries and has full control permissions to the Oracle folder. If not, please do this first before continuing.
    Click the Advanced button at the bottom of the window.
    In the Advanced Security Settings for the folder location, you’ll see that the “Inherited From” column is set to “<not inherited>”.
    Select your user account and click the “Change Permissions” button
    Near the bottom, check the box that says “Replace all existing inheritable permissions on all descendants with inheritable permissions from this object” or any similar message. It should be the second check box in this window.
    Click OK.
    It may take a little bit of time (usually not more than a minute) to modify the permissions for all files in the directory and subdirectories. NOTE: If it tells you that access to cwallet.sso is denied or if it prompts you that you need administrative privileges to access, you can ignore this message as you’ll need to reconfigure the domain anyway (a new cwallet.sso file will get created when you retry the Forms configuration). When finished, click OK, then click OK again.
    Other useful tips can also be found at this knowledge base article at http://pitss.com/us/2012/10/08/oracle-forms-configuration-hangs-at-creating-domain/. Hope this helps!
    Thanks,
    Scott

  • Creating Domain at 0% - Oracle PFRD 11g - Windows Server 2008 64-bit

    1.I want to install and configure Oracle FMW version 11.1.1.2.0 in Windows server 2008 64 bit.
    2.I have followed the steps too as described here in these two forum links:
    1.http://cn.forums.oracle.com/forums/thread.jspa?threadID=2245015
    2.Creating Domain at 0% - Oracle PFRD 11g - Windows Server 2008 64-bit
    3.I am giving my installtion steps..
    I have installed JDK: 1.7.0.
    I have succesfully installed web logic version wls1035_generic.jar.
    I have also installed the FMW version 11.1.1.2.0 using all four disks(Install and donot configure.)
    I have also installed patch version 11.1.1.3.0.
    But When I am trying to run config.bat then It Stops at Creating Domain at 0%,nothing happens, process is sleeping:
    It creates domain of size 9.23 mb and after a long time of approx 900 min It displays "DOMAIN CREATION FAILS".
    I have also checked the path ..It doesnt contains any special characters.
    Any ideas???

    Hi John,
    As per ur suggestion , I have successfully installed FMW 11g in Windows server without Domain Fail.
    1). Installed JDK 1.6u29
    2). Installed WebLogic 10.3.3
    3). Installed FMW 11.1.1.2
    4). Installed FMW 11.1.1.3 Patch
    Now According to the Business need ,I want to install FMW 11.1.1.2 in Linux 32 Environment. Can U please guide me the versions of Java, Weblogic, FMW and its patch so that I can Install it in Linux 32 bit without Domain Fail.
    Deepak Jha

  • OBIEE 11g 11.1.1.6.0 configuration  creating domain failed

    Hi
    I am trying to install OBIEE 11.1.1.6.0. My installation failed during configuration stage of " Creating Domain".
    When i check the log file i see the following error . can you please help me?
    C:\OBIEE\Oracle_BI1\OPatch\opatch apply C:\OBIEE\Oracle_BI1\oneoffpatches\p6599470_111070_Generic.zip -oh C:\OBIEE\Oracle_BI1 -silent -jre C:\OBIEE\Oracle_BI1\jdk
    OPatch failed with error code = 1
    [2012-05-02T20:32:51.188-04:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 15] [ecid: 0000JSFjdb75yW^5xV_AiW1FcR_X000006,0] stderr=[java.lang.NoClassDefFoundError: Files[[
    Caused by: java.lang.ClassNotFoundException: Files
         at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
         at java.security.AccessController.doPrivileged(Native Method)
         at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
         at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
    Could not find the main class: Files.  Program will exit.
    Exception in thread "main" ]
    Edited by: 931665 on May 2, 2012 7:55 PM
    Edited by: 931665 on May 2, 2012 10:16 PM

    Hi,
    What sort of installation you are trying to do..???
    Enterprise or Software only..?
    From where you have downloaded the OBIEE 11g 11.1.1.6.0 dump..? edelivery or from other source..??
    Your error is saying that patch +"p6599470_111070_Generic.zip"+ is missing.
    Down load it from oracle and apply the patch. The details, How to apply the patch will be provided in that zip file only.
    Thanks.

  • OIM 11g configuration failed. Create domain step failed

    Hi,
    I'am facing problem in OIM installation. Here is the description of error :
    Create Domain step failed
    Bootstrap Domain Configuration
    Log
    Config Action Bootstrap Domain Configuration started
    Create Domain
    Error
    Error while starting the domain.
    Cause:
    An error occurred while starting the domain.
    Action:
    See logs for more details.
    Step Create Domain failed
    Log
    Create Domain
    Step Create Domain started
    Error while starting the domain.
    Cause:
    An error occurred while starting the domain.
    Action:
    See logs for more details.
    Step Create Domain failed
    The log file (C:\Program Files (x86)\Oracle\Inventory\logs\install2012-06-07_03-49-05PM.log) showed the following message :
    [2012-06-07T16:10:46.953+05:30] [as] [TRACE] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationStatus] [OOB IDM CONFIG EVENT] onConfigurationStatus ->24938fb1-a72a-427a-b318-a098773c53f6 StatusMsg:Starting Domain.
    [2012-06-07T16:10:46.953+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] reportStartConfigAction: EXIT........
    [2012-06-07T17:49:23.328+05:30] [as] [ERROR] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0]
    [2012-06-07T17:49:23.328+05:30] [as] [ERROR] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [[
    oracle.as.provisioning.util.ConfigException:
    Error while starting the domain.
    Cause:
    Starting the Admin_Server timed out.
    Action:
    See logs for more details.
         at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
         at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3150)
         at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3040)
         at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1645)
         at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:635)
         at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
         at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
         at oracle.as.idm.install.config.BootstrapConfigManager.doExecute(BootstrapConfigManager.java:690)
         at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:371)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
         at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
         at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:64)
         at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:160)
         at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
         at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
         at java.lang.Thread.run(Thread.java:662)
    [2012-06-07T17:49:23.328+05:30] [as] [TRACE:16] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [SRC_CLASS: IdMProvisioningEventListener] [SRC_METHOD: onConfigurationError] ENTRY 24938fb1-a72a-427a-b318-a098773c53f6
    [2012-06-07T17:49:23.328+05:30] [as] [TRACE] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] ________________________________________________________________________________
    [2012-06-07T17:49:23.328+05:30] [as] [TRACE] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] [OOB IDM CONFIG EVENT] onConfigurationError -> configGUID 24938fb1-a72a-427a-b318-a098773c53f6
    [2012-06-07T17:49:23.328+05:30] [as] [TRACE] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] [OOB IDM CONFIG EVENT] ErrorID: 35091
    [2012-06-07T17:49:23.328+05:30] [as] [TRACE] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] [OOB IDM CONFIG EVENT] Description: [[
    Error while starting the domain.
    Cause:
    An error occurred while starting the domain.
    Action:
    See logs for more details.
    [2012-06-07T17:49:23.328+05:30] [as] [TRACE] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] ________________________________________________________________________________
    [2012-06-07T17:49:23.328+05:30] [as] [TRACE] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] [OOB IDM CONFIG EVENT] onConfigurationError -> eventResponse ==oracle.as.provisioning.engine.ConfigEventResponse@8ae380
    [2012-06-07T17:49:23.328+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [OOB IDM CONFIG EVENT] onConfigurationError -> Configuration Status: -1
    [2012-06-07T17:49:23.328+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [OOB IDM CONFIG EVENT] onConfigurationError -> Asking User for RETRY or ABORT
    [2012-06-07T17:49:23.328+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [OOB IDM CONFIG EVENT] onConfigurationError -> ActionStep:Create_Domain
    [2012-06-07T17:49:23.328+05:30] [as] [TRACE] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] [OOB IDM CONFIG EVENT] onConfigurationError -> wait for User Input ....
    Thanks in advance for help.
    Thanks and Regards,
    Prasad
    Edited by: 938380 on Jun 7, 2012 5:52 AM

    actually when i restarted the configuration the test passed for create domain but it went on to fail in the apply java required file step
    here is the link to the thread : OIM 11g configuration failed. Apply java required files step failed
    Hoping for your help.. and thanks for the suggestions..
    Regards,
    Prasad

  • Creating Domain step fails while trying to install OBIEE 11g (11.1.1.5)

    Hi Everyone,
    I am really stuck at a point from where I do not know which route to take. I am trying to install OBIEE 11g (11.1.1.5) on my Windows 7 (32-bit) laptop. I have tried all the options:
    1. Simple Install
    2. Enterprise Install
    3. Software only install (after installing Weblogic 10.3.4.0 separately)
    Everything goes well till the step Bi Configuration->Creating Domain.
    In this process whenever it reaches the stage when it tries to start Node Manager, it starts getting java exceptions and fails. It typically occurs when it does not find the nodemanager.properties file and tries to save the configurations there. It then encounters a Fatal Error.
    Excerpt from install2011-07-29_06-13-21PM.out
    Initializing WebLogic Scripting Tool (WLST) ...
    Welcome to WebLogic Server Administration Scripting Shell
    Type help() for help on available commands
    Launching NodeManager ...
    Properties: {ListenPort=5556,NativeVersionEnabled=true,NodeManagerHome=C:/FusionMW/wlserver_10.3/common/nodemanager,StartScriptEnabled=true,}
    Command: C:\FusionMW\JROCKI~1.2-4\jre\bin\javaw.exe -classpath "C:\FusionMW\JROCKI~1.2-4\jre\lib\rt.jar;C:\FusionMW\JROCKI~1.2-4\jre\lib\i18n.jar;C:\FusionMW\patch_wls1035\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\FusionMW\JROCKI~1.2-4\lib\tools.jar;C:\FusionMW\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\FusionMW\WLSERV~1.3\server\lib\weblogic.jar;C:\FusionMW\modules\features\weblogic.server.modules_10.3.5.0.jar;C:\FusionMW\WLSERV~1.3\server\lib\webservices.jar;C:\FusionMW\modules\ORGAPA~1.1\lib\ant-all.jar;C:\FusionMW\modules\NETSFA~1.0_1\lib\ant-contrib.jar;C:\Users\SUCHAT~1\AppData\Local\Temp\.;C:\Program Files\Java\jre6\lib\ext\QTJava.zip;C:\FusionMW\utils\config\10.3\config-launch.jar;C:\FusionMW\WLSERV~1.3\common\derby\lib\derbynet.jar;C:\FusionMW\WLSERV~1.3\common\derby\lib\derbyclient.jar;C:\FusionMW\WLSERV~1.3\common\derby\lib\derbytools.jar" weblogic.NodeManager "-v"
    NMProcess: <Jul 29, 2011 7:21:31 PM> <INFO> <Loading domains file: C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.domains>
    NMProcess: Jul 29, 2011 7:21:31 PM weblogic.nodemanager.server.NMServerConfig initDomainsMap
    NMProcess: INFO: Loading domains file: C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.domains
    NMProcess: <Jul 29, 2011 7:21:35 PM> <INFO> <Loading identity key store: FileName=C:/FusionMW/WLSERV~1.3/server\lib\DemoIdentity.jks, Type=jks, PassPhraseUsed=true>
    NMProcess: Jul 29, 2011 7:21:35 PM weblogic.nodemanager.server.SSLConfig loadKeyStoreConfig
    NMProcess: INFO: Loading identity key store: FileName=C:/FusionMW/WLSERV~1.3/server\lib\DemoIdentity.jks, Type=jks, PassPhraseUsed=true
    NMProcess: <Jul 29, 2011 7:21:35 PM> <WARNING> <Node manager configuration properties file 'C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.properties' not found. Using default settings.>
    NMProcess: Jul 29, 2011 7:21:35 PM weblogic.nodemanager.server.NMServer <init>
    NMProcess: WARNING: Node manager configuration properties file 'C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.properties' not found. Using default settings.
    NMProcess: <Jul 29, 2011 7:21:35 PM> <INFO> <Saving node manager configuration properties to 'C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.properties'>
    NMProcess: Jul 29, 2011 7:21:35 PM weblogic.nodemanager.server.NMServer <init>
    NMProcess: INFO: Saving node manager configuration properties to 'C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.properties'
    NMProcess: <Jul 29, 2011 7:21:35 PM> <SEVERE> <Fatal error in node manager server>
    NMProcess: java.lang.NullPointerException
    NMProcess:      at java.util.Hashtable.containsKey(Hashtable.java:314)
    NMProcess:      at weblogic.nodemanager.server.NMServerConfig.initNetworkInfoList(NMServerConfig.java:491)
    NMProcess:      at weblogic.nodemanager.server.NMServerConfig.getNetworkInfoList(NMServerConfig.java:481)
    NMProcess:      at weblogic.nodemanager.server.NMServerConfig.getConfigProperties(NMServerConfig.java:545)
    NMProcess:      at weblogic.nodemanager.server.NMServer.<init>(NMServer.java:154)
    NMProcess:      at weblogic.nodemanager.server.NMServer.main(NMServer.java:375)
    NMProcess:      at weblogic.NodeManager.main(NodeManager.java:31)
    NMProcess:
    NMProcess: Jul 29, 2011 7:21:35 PM weblogic.nodemanager.server.NMServer main
    NMProcess: SEVERE: Fatal error in node manager server
    NMProcess: java.lang.NullPointerException
    NMProcess:      at java.util.Hashtable.containsKey(Hashtable.java:314)
    NMProcess:      at weblogic.nodemanager.server.NMServerConfig.initNetworkInfoList(NMServerConfig.java:491)
    NMProcess:      at weblogic.nodemanager.server.NMServerConfig.getNetworkInfoList(NMServerConfig.java:481)
    NMProcess:      at weblogic.nodemanager.server.NMServerConfig.getConfigProperties(NMServerConfig.java:545)
    NMProcess:      at weblogic.nodemanager.server.NMServer.<init>(NMServer.java:154)
    NMProcess:      at weblogic.nodemanager.server.NMServer.main(NMServer.java:375)
    NMProcess:      at weblogic.NodeManager.main(NodeManager.java:31)
    NMProcess: Stopped draining NMProcess
    NMProcess: Stopped draining NMProcess
    Successfully launched the Node Manager.
    The Node Manager process is running independent of the WLST process.
    Exiting WLST will not stop the Node Manager process. Please refer
    to the Node Manager logs for more information.
    The Node Manager logs will be under C:\FusionMW\wlserver_10.3\common\nodemanager
    Node Manager starting in the background
    Excerpt from nodemanager.log which is created at <WL_HOME>\common\nodemanager:
    <Jul 29, 2011 7:21:31 PM> <INFO> <Loading domains file: C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.domains>
    <Jul 29, 2011 7:21:35 PM> <INFO> <Loading identity key store: FileName=C:/FusionMW/WLSERV~1.3/server\lib\DemoIdentity.jks, Type=jks, PassPhraseUsed=true>
    <Jul 29, 2011 7:21:35 PM> <WARNING> <Node manager configuration properties file 'C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.properties' not found. Using default settings.>
    <Jul 29, 2011 7:21:35 PM> <INFO> <Saving node manager configuration properties to 'C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.properties'>
    <Jul 29, 2011 7:21:35 PM> <SEVERE> <Fatal error in node manager server>
    java.lang.NullPointerException
         at java.util.Hashtable.containsKey(Hashtable.java:314)
         at weblogic.nodemanager.server.NMServerConfig.initNetworkInfoList(NMServerConfig.java:491)
         at weblogic.nodemanager.server.NMServerConfig.getNetworkInfoList(NMServerConfig.java:481)
         at weblogic.nodemanager.server.NMServerConfig.getConfigProperties(NMServerConfig.java:545)
         at weblogic.nodemanager.server.NMServer.<init>(NMServer.java:154)
         at weblogic.nodemanager.server.NMServer.main(NMServer.java:375)
         at weblogic.NodeManager.main(NodeManager.java:31)
    After this it hangs for a long time before finally coming up with Node Manager Server Timed Out error and finally the Creating Domain step fails.
    One thing that I have noticed is that whenever it tries to create the nodemanager.properties or write to it it encounters this error and hence the nodemanager.properties file is also not getting generated.
    I have ensured that there are no spaces in the TEMP and TMP paths. I even tried creating and putting the nodemanager.properties file in the location but that too does not work.
    Strange part is that when I install Weblogic separately and have nodemanager as a windows service, then with the nodemanager.properties that I created the windows service runs, but the OBIEE installation still fails.
    Any help on this would be greatly appreciated.
    Thanks and regards,
    Subho

    My problem is "creating domain is failed". I guess that the issue with windows 7 32 bits on laptop doesn't configure and run nodemanager. I tried to start nodemanager but don't work (with weblogic scriptinf tools WST). However, Weblogic run ok but nodemanager is inactive. Also it doesn't create nodemanager.propierties. If I create a file nodemanager.properties (or I copied on directory obiee_home\ws_server_10.3\common\nodemanager) obiee installer configures its parameters pre-configured (if I modify a parameter, the installer modify it a default value and I don't know where is these parameters and its definition).
    I have installed obiee simple and enterprise and it don't work. I have installed on oracle 11g R2 (desktop and enterprise with datawarehouse) and obiee installer doesn't work. Further this installation obiee delay an hour and then generates error in my case "creating domain is failed".
    I'm going try to run install obiee 11.1.1.5 on windows 7 xp mode.
    Important: We need help of oracle experts or Oracle communicates if obiee installs or not on windows 7 32 bits laptop because We have wasted
    Thanks if anyone help us!!

  • Oracle Forms 11g Installation. Create domain problem

    Hi,
    I am installing Oracle Forms 11g on Windows 7 32-bit system. Installation is done. Create domain is failing during the configuration process.
    I searched everywhere but cudnt find a solution specific to the problem.
    Only recognisable error message is 'CSF Entries will not be parsed since the AdminServer is unreachable'.
    I have checked Node Manager is not running.
    Please find below the snapshot of the last few lines of the log file
    [2014-05-23T13:43:22.554+05:30] [as] [TRACE] [] [oracle.as.install.engine.modules.presentation] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] [SRC_CLASS: oracle.as.install.template.screens.ConfigurationPage] [SRC_METHOD: onDescriptionChange]  [CONFIG PAGE] New Description: Application Configuration
    [2014-05-23T13:43:22.554+05:30] [as] [TRACE] [] [oracle.as.install.engine.modules.presentation] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] [SRC_CLASS: oracle.as.install.template.screens.ConfigurationPage] [SRC_METHOD: onDescriptionChange]  [CONFIG PAGE] Old Description: Application Configuration
    [2014-05-23T13:43:22.570+05:30] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] Setting valueOf(DOMAIN_HOME_PATH) to:C:/Oracle/Middleware/user_projects/domains/ClassicDomain. Value obtained from:USER
    [2014-05-23T13:43:23.787+05:30] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] Setting valueOf(DOMAIN_PORT) to:7001. Value obtained from:USER
    [2014-05-23T13:43:27.297+05:30] [as] [NOTIFICATION] [] [oracle.as.install.engine.config] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] Starting Action:Application Configuration
    [2014-05-23T13:43:27.297+05:30] [as] [TRACE:16] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] [SRC_CLASS: oracle.as.install.classic.ca.standard.ClassicConfigMain] [SRC_METHOD: doExecute] ENTRY
    [2014-05-23T13:43:35.117+05:30] [as] [WARNING] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] CSF Entries will not be parsed since the AdminServer is unreachable
    [2014-05-23T13:43:35.133+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] Executing a Jaxb workflow ...
    [2014-05-23T13:43:35.133+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] Begining Oracle Fusion Middleware Configuration ...
    [2014-05-23T13:43:35.133+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] Begining Oracle Fusion Middleware Configuration ...
    [2014-05-23T13:43:35.180+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] ENTRY ASDomain.createDomain
    [2014-05-23T13:43:35.180+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] ENTRY ASDomain.createDomain
    [2014-05-23T13:43:35.180+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] reportStartConfigAction: ENTRY........
    [2014-05-23T13:43:35.180+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] reportStartConfigAction: eventStatus........oracle.as.provisioning.engine.ConfigEventStatus@180874
    [2014-05-23T13:43:35.180+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] reportStartConfigAction: 2........
    [2014-05-23T13:43:35.180+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] reportStartConfigAction: Set the Extion Id to START........
    [2014-05-23T13:43:35.180+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] reportStartConfigAction: Did the assignment...
    [2014-05-23T13:43:35.180+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] reportStartConfigAction: EXIT........
    [2014-05-23T13:43:35.320+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] Domain Home: C:/Oracle/Middleware/user_projects/domains/ClassicDomain
    [2014-05-23T13:43:35.320+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] Oracle Home: C:/Oracle/Middleware/Oracle_FRHome2
    [2014-05-23T13:43:35.320+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] Setting os object values in Python
    [2014-05-23T13:44:18.861+05:30] [as] [ERROR] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] [[
    oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
    at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:686)
    at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
    at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
    at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
    at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
    at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
    at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
    at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:375)
    at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
    at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
    at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
    at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:96)
    at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:186)
    at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
    at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
    at java.lang.Thread.run(Thread.java:662)
    Any help is highly appreciated.

    Hi,
    Please run the below commands in the command prompt :-
    1)hostname
       Ex:-
           C:\Users>hostname
            celvpint8511
    2)nslookup <Result of the step 1>
       Ex :-  C:\Users>nslookup celvpint8511
                Server:         192.135.82.132
               Address:        192.135.82.132#53
               Name:   celvpint8511.us.oracle.com
               Address: 10.64.166.6 [ So this is the IP Address which needs to be used ]
    So please get the right IP and then update it in the host file.
    Regards,
    Prakash.

  • Installation issue:create domain failed in configuration steps

    Hello,
    I am trying to install Oracle 11g BIEE in windows XP 32 bit machine.
    Till configurtaion steps no problem.After that it takes some 1 hr in create domain step and at the end shows failed.
    I searched in this forum, in one its said create a separate folder for temp and assign that as path in the
    environment variable TEMP AND TMP
    I did that still its same.
    If i click continue then also same
    Almost everything which comes after Create doman is failed.
    Pls help,what should i do?
    Thanks

    Hello,
    just one thing installing RCU when need to give the schema name i didn't give sys and gave a user who is normal user with dba privillege because of which i got some errors like insufficient privilleges like while running something like this...
    "grant execute dbms_ouput to dev_mds"
    and some plsql object creation failed like "Pl/sql object failed SD Clean up procedure",at the time when u click create button.
    But at the end it showed the schema being created.
    So i didn't bother much about that.
    I cannot give sys user as i don't have my own db in my machine.
    Is this a problem because of which now i am facing problem in configuration steps????????
    Thanks

  • Obiee 11g creating domain error

    Hi,
    I am installing obiee 11g on windows 7 ..when i'm installing obiee 11g when it came to last step 14 of 15 creating domain had failed..how can i resolve this issue

    Hi,
    The issue due to java and static IP are not pointing to weblogic domain creation steps that why its getting erro..few months back i too face this issues and resolve it please refer my blog
    Solution: while installation Enterprise/Software type ...while installing weblogic server run like below comment
    D:\OBIEE111160\wls1036_generic.jar
    Weblogic 10.3.5/6 64bit installtion must run like below
    go --> windows --->type run ==> cmd prompt -->
    C:\>cd C:\java\jrockit-jdk1.6.0_29-R28.2.2-4.1.0\bin
    C:\java\jrockit-jdk1.6.0_29-R28.2.2-4.1.0\bin>java -D64 -jar D:\OBIEE111160\wls1
    036_generic.jar
    and another thing please make sure static IP (looback adaptor and host\etc file should be pointing like below
    Install Loopback Adapter with Static IP Address
    http://www.oracledistilled.com/windows/configuring-the-loopback-adapter-on-microsoft-windows/
    Note: hots/host/etc file the static ip should be set like below
    # localhost name resolution is handled within DNS itself.
    10.10.1.7 localhost Deva-PC
    (IP address host domain name host/computer name)
    For refer my blog
    http://obieeelegant.blogspot.sg/2012/07/obiee111160-software-only-installation.html
    Thanks
    Deva

  • Create Domain from template doesn't loads right deployment configurations

    Hi!
    I would like to export my domain configuration in a new machine.
    As documentation reccomended I've generated the template.jar using the template builder.
    When I try to create a new domain on other machine (using the option "create domain from tempalte") I noted that the configuration server would load correctly but the same doesn't happens for the deployment configuration.
    Does Anyone know where is the error?
    Diego

    Thank you for the reply.
    Since I've configured a complex environment this is a critical issue for me.
    I tried two different solution.
    The first is using the template builder, the second using the pack/unpack script but the result is the same.
    I hoped to solve the problem unpacking the environment changing only the config file but it seem get more than one problem.
    I will ask helping to the support.
    Diego

  • OBIEE 11G Create Domain Faild

    os：linux 64
    obiee：bi_windows_x86_111130_64_disk
    when create domain faild，
    pls help me！！
    Creating a new AdminServer Object ...
    AdminServer port is 7001
    Starting the domain ...
    oracle.as.provisioning.util.ConfigException:
    Error while starting the domain.
    Cause:
    An error occurred while starting the domain.
    Action:
    See logs for more details.
         at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
         at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3177)
         at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3037)
         at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1646)
         at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:636)
         at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:392)
         at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
         at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
         at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:51)
         at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:79)
         at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
         at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:110)
         at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
         at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
         at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
         at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
         at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
         at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
         at java.lang.Thread.run(Thread.java:619)
    Caused by: oracle.as.provisioning.util.ConfigException:
    Error while starting the domain.
    Cause:
    Starting the Admin_Server timed out.
    Action:
    See logs for more details.
         at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
         at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3147)
         ... 19 more
    oracle.as.provisioning.exception.ASProvisioningException
         at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
         at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
         at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:51)
         at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:79)
         at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
         at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:110)
         at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
         at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
         at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
         at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
         at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
         at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
         at java.lang.Thread.run(Thread.java:619)
    Caused by: oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
         at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:687)
         at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:392)
         at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
         ... 14 more

    Hi,
    I found the issue, that is I have installed once and uninstalled it. but some of the components still not released. This is the route cause for this issue,
    Solution:
    Go to Run-> Services.msc -> search for the Weblogic related services.
    If we found any such services running/disabled or in any state. we need to remove them.
    To remove them go to run--> regedit --> HKEY_LOCAL_MACHINE --> SYSTEM--> CurrentControlSet-->Services
    and then remove/delete the service..
    Restart the system and try for fresh install....
    Its resolved my issue.

  • Creating domain for BI Publisher issue

    Hello,
    Im trying to create domain for BI Publisher 11.1.1.3.0.
    When configuring JDBC there are two component schemas: BIP Schema and OWSM MDS Schema. For database I have MS SQL Server configured with required RCU schemas.
    The strange part: when testing the configuration, one fails - the BIP Schema. In the result log I see a very strange ""SELECT 1 FROM DUAL"" test which is obviously for oracle and not MS SQL.
    For the 2nd schema, the one with successful test, there is a valid test query.
    Please help me understand what am I doing wrong, why is there an Oracle test query for a MS SQL database and finally why on earth only one test fails because for both i have the same database type.
    The version of fusion middleware is the one that came with BI installer 11g (11.1.1.3.0)
    If wonder why am I doing this manually it is because the BI installer hangs at step 11 Creating Domain for about 100 minutes and then exits with timeout. great programming!
    Please give me any hint, advise i can use to make BI Publisher run.
    thank you

    809239 wrote:
    Hi Experts,
    OBIEE 10.1.3.4.1.
    I am able to login bi publisher though Administrator user. But am not able to login remaing users.
    I am getting below error.
    Oracle BI Publisher Enterprise
    Reporting Login: Login failed: Please contact administrator for your username/password.
    Error Details
    Error Codes:
    Please help above issue it is very urgent.
    ThaksHi,
    Refer to this post to make sure you have all the settings implemented correctly: ( http://onlineappsdba.com/index.php/2009/01/15/oracle-bi-publisher-admin-console-xmlpserver-login-issue-administratoradministrator/ ).
    Also, check the log files to see if you can get more detailed error messages.
    -Amith.

Maybe you are looking for

  • Can't Make PDF's with Acrobat 9 Pro on Windows XP Pro

    I just recently installed Acrobat 9 with the CS4 suite and can't make a PDF from either my scanner or MS Word. It says that my scanner can't do "Presets" and I don't see how I can change that. And Acrobat just tries for about ten minutes to make a PD

  • Using Photoshop as External Editor in Aperture

    I'll be switching from PC to Mac soon. I use Photoshop to do all my editing. The database mgt tool for my PC does not have a Mac version, so I'm hoping Aperture 3 will fit my needs. I now make three versions of a photo - the original, a "working" ver

  • Help with uploading quality of prints

    Hello--- need help - I use photoshop elements 9 to edit my pictures and digital scrapbook pages--- it seems like when I submit them online to a website to have them printed- they are too bright ??? I am using an acer aspire notebook model 7551-7422 n

  • Login with user name

    Logged out and back in on the old forum.(this forum) Followed the prompts to migrate account. However, when I log into the new forum my MM user name shows. Yesterday I was logged in to the new forum under my old name.

  • VAT numbers not determined on invoice

    Hi Friends, I have an issue. VAT number does not appear on all  invoices raised for deliveries (originating sales order is same for all the invoices). The issue seemed to be linked with the assignment at sales order items for country of destination.