Hangs at Startup - Excite AT305 T16

I have an Excite AT305-T16 and I am having the BLUES with it. I just received it from being repaired a month ago because there was a problem with the motherboard. Now, My Excite will LOOK as though it is powering on/starting up properly but does not go past either the Toshiba Innovations screen (very first screen) or the little horizon poppy screen (second screen that appears after it starts...I can't even hard turn it off for a LONG WHILE after I attempt to turn it on. I had a terrible time with Toshiba's customer service after my repair but I NEED HELP...my children are so anxious (it's their tablet that I purchased for them as a Christmas gift and it has been giving us the blues since the end of January). Not a happy camper/customer...BTW This is my CHILDREN'S tablet so I am not sure if there have been any updates or what apps they have recently put on it (immediately prior to this problem). I do monitor their activities on it and had not seen anything out of the ordinary. The day before it stopped powering on properly, it worked as anticipated.

My Excite startsup at a wierd screen and goes no farther Screen show time, date, the message "TRY AGAIN" Tom the right of this is a rectangle with a flashing verticular line in the middle of it. It is as thought it is awaiting a password or somethng? Do not know what!!A keyboard will display if I press _______________ Then touching the rectangle will display a keyboard (US) and message for input options. Nothing else. Pressing the input options key will cause the down arrow and home icon to display but trouch either and nothing happens but that the Input options menugoes away

Similar Messages

Please help Excite AT305-T16 got hacked - See Video

I just got the Tablet on 01/23/13. I ordered a used one (like new condition) from Amazon Warehouse.
It came very fast within 2 days. Look like the warehouse is in NV state and I am in CA.
I got the tablet S/N:5C043564R.
You have to look at the video to believe me for what was happening.
This tablet has some kind of remote software installed which can monitor what you do as soon as you get on the Internet. At first i thought the tablet seems to be over responsive.
I haven't touched it but it managed to click and move itself.
While I tried to type in the password, the cursor will keep moving from the password field to the other.
I finally got into Gmail App and I was shocked to see what happened to the tablet.
Somebody remotely scroll+touch+zoom+up+down through my emails, trying to find some confidential information.
I didn't believe my eyes.
I did power off the unit and restarted again. As soon as I got into Gmail app, it happens again.
I grabbed my phone to capture what happened and then turn the power button totally off.
4 hrs later, I wonder if it will act the same since I move to another location.
Before I connect the Wi-Fi, I went into Adroid setting and to do the factory reset, hoping to wipe off whatever is.
I almost thought that it did remove those hacker remote thing.
I was so afraid so I went in the App and disable GMAIL app and LogMein App.
Then I went to download some Antivirus software on the Google Play. I installed Lookout and Zapper Task Killer, hoping that I would kill or see what is running behind. Everything seems to be normal at that moment.
I installed and signup on other app like Netflix and Skype. Again I was having a hard time while entering the password because the cursor kept moving out of the password field by itself.
I finally went into email this time via PrintShare App.
Again I can see somebody has remotely scroll up & down and looked into my emails. Try to find something.
It does finally stop at the email that have my info, which my full name and address on it.
I could not believe my eyes. The chill was running down my back.
This is the real criminal here.
I am sending this tablet back for sure.
I just want to give a warning to the other user who might have bought the used tablet.
PLEASE BE AWARE OF THIS REMOTELY WATCHING YOUR TABLET HACKER
Look at the video review I put on Amazon here. (reviewed date 01/24/13 by U.farrell)
Excite AT305 Review on Amazon
Attachments:
DSCN1833.JPG ‏957 KB
DSCN1836.JPG ‏939 KB

That Dude or Dudess from Toshiba is right.. I have a similar problem with my Toshiba Excite. I bought it off ebay as a Toshiba Manuf Refurb. I received it this past Wednesday. I opened it, charged it and used it for about 20 minutes. All was fine. Thursday morning I turned it on and started using it to check my email and watch some news. About 20 minutes into it the thing starts bugging out. Mine is acting similar to yours, but my tablet keeps showing the menu, as if someone were pressing the very top right corner where the dotted drop down menu appears. It sucks, but it's kind of funny because I did the same thing you did. I put it on my wood desk and took a video of it clicking non stop, I used a wood desk so nobody could claim it may be some type of static issue.. Menu , no menu , Menu , no menu, over and over and very fast. I never even had a chance to download any apps other than putting the info in for my gmail account. I emailed the seller on ebay and they said contact Toshiba. I called Toshiba, and although I have nothing bad to say about Toshiba they told me to tell the seller to take the item back. I think the Toshiba rep that posted on your issue hit it dead nuts. I just figured I'd share, I know I am not helping you other than letting you know that there is someone else out here with the same issue. Good luck, with yours..
Tim B.

Please help Excite 10 AT305-T16 screen not working

Hello my Excite 10 AT305-T16 WAS stuck on the lock screen. I reset it to factory settings by holding the "+" and power button. I was sure that this would have resolved the issue with my tablet but it didn't. I am still unable to use the screen of my tablet. The only thing I can do is power it off, by holding the power button. I'm not sure what to do with it now. other than continue to power it on and off even though there hasn't been a change in what's happened. Please help, I would like to be able to use it again.
P.S. I have never spilled anything on it, or dropped it.

It sounds like you'll need to contact customer support and set up a repair.
You can call (800) 457-7777.
- Peter

WebLogic 10.3.2.0 hanging at startup after "The server log file is opened."

Hi,
A WebLogic 10.3.2.0 server is hanging at startup. There are no error messages. The last command in the startup window is:
"The server log file <log file dest> is opened. All server side log events will be written to this file."
I think the next line should be:
"Security initializing using security realm realm."
Any ideas on what could be the issue? For instance what resources should be accessed at that point of time? There is sufficient space left on the (virtual machine) disk. The VM configured with 8GB memory. Could it be performance related still?
Following is written to the log file:
####<12.aug.2010 kl 09.47 CEST> <Info> <WebLogicServer> <oim> <> <Main Thread> <> <> <> <1281599254656> <BEA-000214> <WebLogic Server "AdminServer" version:
WebLogic Server 10.3.2.0 Tue Oct 20 12:16:15 PDT 2009 1267925 Copyright (c) 1995, 2009, Oracle and/or its affiliates. All rights reserved.> ####<12.aug.2010 kl 09.47 CEST> <Notice> <Log Management> <oim> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1281599255312> <BEA-170019> <The server log file ....logs\AdminServer.log is opened. All server side log events will be written to this file.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Log Management> <oim> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1281599255390> <BEA-170023> <The Server Logging is initialized with Java Logging API implementation.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Diagnostics> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599255671> <BEA-320001> <The ServerDebug service initialized successfully.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Store> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599256515> <BEA-280050> <Persistent store "WLS_DIAGNOSTICS" opened: directory="....s\domains\oim\servers\AdminServer\data\store\diagnostics" writePolicy="Disabled" blockSize=512 directIO=false driver="wlfileio2"> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257140> <BEA-002622> <The protocol "t3" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257140> <BEA-002622> <The protocol "t3s" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257140> <BEA-002622> <The protocol "http" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257140> <BEA-002622> <The protocol "https" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257140> <BEA-002622> <The protocol "iiop" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257156> <BEA-002622> <The protocol "iiops" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257156> <BEA-002622> <The protocol "ldap" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257156> <BEA-002622> <The protocol "ldaps" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257187> <BEA-002622> <The protocol "cluster" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257187> <BEA-002622> <The protocol "clusters" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257218> <BEA-002622> <The protocol "snmp" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257218> <BEA-002622> <The protocol "admin" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257218> <BEA-002624> <The administration protocol is "t3s" and is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <RJVM> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257468> <BEA-000570> <Network Configuration for Channel "AdminServer"
Listen Address          :7001
Public Address          N/A
Http Enabled          true
Tunneling Enabled     false
Outbound Enabled     false
Admin Traffic Enabled     true>
####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257687> <BEA-002609> <Channel Service initialized.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Socket> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599258000> <BEA-000406> <NTSocketMuxer was built on Jan 13 2005 17:47:03
####<12.aug.2010 kl 09.47 CEST> <Info> <Socket> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599258078> <BEA-000436> <Allocating 3 reader threads.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Socket> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599258078> <BEA-000446> <Native IO Enabled.> ####<12.aug.2010 kl 09.47 CEST> <Info> <IIOP> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599259500> <BEA-002014> <IIOP subsystem enabled.>
Thanks!!

tried both of these, still having same error as below:
<Sep 8, 2010 1:32:37 PM IST> <Critical> <Security> <BEA-090402> <Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.>
<Sep 8, 2010 1:32:37 PM IST> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:959)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
Truncated. see log file for complete stacktrace
Caused By: javax.security.auth.login.FailedLoginException: [Security:090304]Authentication Failed: User weblogic2 javax.security.auth.login.FailedLoginException: [Security:090302]Authentication Failed: User weblogic2 denied
at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:250)
at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
at java.security.AccessController.doPrivileged(Native Method)
at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
Truncated. see log file for complete stacktrace
>
<Sep 8, 2010 1:32:37 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<Sep 8, 2010 1:32:37 PM IST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<Sep 8, 2010 1:32:37 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
Pls help me out ASAP...

Firefox 31 hangs on startup with no error messages

Simply put, Firefox hangs right on startup. I see it loading the two generic tabs and then the wheel spins and then it says 'Not Responding' on the top of the window. I have to force close it each and every time, and I've also tried the following solutions in no particular order to alleviate the issue:
1) Ran SuperAntiSpyware and Malwarebytes last night for any possible infections. Reported back with nothing.
2) Booted my laptop up in Safe Mode (with networking) and still couldn't get it to operate.
3) Performed several clean uninstalls and re-installations which also included clearing out the profiles altogether and then trying to open it again, nothing.
4) Booted up Firefox by holding down the shift key and resetted it to its default settings and then tried firing it up again. Nothing.
5) Attempted booting up FF in Safe Mode with the shift key, nothing.
6) Created a new profile and tried booting FF, nothing.
7) Read this article http://kb.mozillazine.org/Firefox_hangs#Hyper-Threading about Hyper-Threading and followed the instructions which got it to operate, but I can't access the toolbar or the option menus. When I click on options Firefox closes with no error messages. I have a feeling this isn't the issue at hand but I figure I'd try it and at least I can get it to fully load and not hang.
8) Deleted all Firefox extensions and Plug-ins, nothing.
9) Enabled Firefox through firewall and antivirus settings, nothing.
10) Updated my BIOS firmware as suggested in #7, nothing.
I've done almost 10 different things and I still can't figure out why Firefox keeps hanging on startup. I've looked into Youtube videos for tutorials and others posted about the Java crashing that was happening in an earlier version of FF. Since its not crashing, I'm unable to look into the crash logs and pinpoint a crash number or anything because it just freezes and when I click to close it I get a message saying: 'Close program' or 'Wait for it to respond.'
I'm running a 64 bit Windows 7 on an HP Pavilion g6-1c44wm Notebook PC
Microprocessor 2.10 GHz Intel Pentium Processor B950
Microprocessor Cache 2MB L3 Cache
Memory 4GB DDR3 SDRAM (1 DIMM)
Memory Max Maximum supported = 8GB
Video Graphics Intel HD Graphics
Video Memory Up to 1696MB
Hard Drive 500GB 5400RPM)
I'm trying to be specific as possible! Please help! I'm at the end of my rope here!

Try to completely uninstall firefox, that means to '''delete''' the [http://kb.mozillazine.org/Installation_directory#Windows Installation directory] located for your 64bit in C:\Program Files (x86)\Mozilla Firefox\ , also, '''delete''' the C:\Users\<username>\AppData\Local\Mozilla\Firefox and '''if exist''', '''delete''' the C:\Users\<username>\AppData\Local\VirtualStore\Program Files\Mozilla Firefox.
then download and install again a new full installer from : https://www.mozilla.org/en-US/firefox/all/
disable firewall and antivirus and antispyware for a little bit, and run firefox. any luck ?
thank you

10.7.4 Hanging at Startup

I don't often find the need for these forums, but I've got a tough one this time. Here's my issue:
I was recently using my late 2008 MBP (6 Gig RAM, 500 Gig HD) without issue as I have done for the last several years. The other night, I was running my DJ software (Traktor) which worked fine all night. I ended the night and shut the lid on my MBP, the next day, Traktor was still shutting down (as it does on occasion). I gave it a few minutes, but it seemed to have crashed so I force quit the program. Things seemed to be running slow so I restarted. When I did, my system hung on startup at the gray Apple screen with the spinning wheel. After many days and many, many troubleshooting routines, I'm STILL unable to make this go away permanently. Here's what I've tried:
(I've always been able to boot in Safe Boot mode, so that's how I've been doing maintenence)
Initially, I thought this was probably related to my DJ software so I uninstalled it (including manually uninstalling all extensions and preferences).
That didn't work so I started cleaning out my system (I haven't done a fresh install of OSX since like 2005, so it was probably time anyways). Still, no luck.
I reinstalled 10.7.4. Success, but only for the initial startup. A subsequent reboot and I'm back at the stalled startup.
Try removing more stuff from the system to no avail.
Wipe hard drive completely, reinstall OS X. WORKS!
So, I start migrating things back over from my backup (I used CCC instead of TM because I wasn't sure of the integrity of my TM backup). Things seem to be going OK.
Reinstall Messages beta and restart. NOOOOOO. Back hanging at same place.
I figure it has something to do with Messages, so I Uninstall the Messages beta. Still hanging at startup.
Getting really frustrated now.
Time to try a blast from the past: Applejack. Yes, I know, it's not officially supported under 10.7, but low and behold, cleaning caches gets me back in business--but only for one reboot. Then I'm back at a stalled startup until I clean the caches again (and it's the system cache, not the user cache).
I tried resetting the SMC and the PRAM and then immediately cleaning the system caches. That again gives me one good restart then back to the hanging startup. And, that's where I'm at now.
I'm absolutely stuck. I literally have not experienced this kind of issue in at least five years, so I could really use a hand on this one. The last log entry that I'm getting on the stalled startup is this:
6/28/12 11:25:39.364 PM ntpd: proto: precision = 1.000 usec
Then it just hangs forever. The spinning progress wheel just freezes. I left it sitting overnight at that screen, so I'm 100% sure that it's not going anywhere.
I have a couple of theories on what the issues could be, but at this point, I'm totally open to suggestions. From what I can tell (from watching the logs over the course of several (seems like) hundred startups), it seems like this is about the point in the startup where iCloud is trying to check my user credentials. That said, I could be totally off base with that. Also, although the preceeding log entry seems to come after this on occasion, I'm NOT seeing this entry on any of the startups that hang:
6/28/12 11:25:38.000 PM kernel: NVDANV50HAL loaded and registered.
Seems to me that this could be an issue too since that's obviously associated with the graphics hardware.
So, any help would be greatly appreciated!

Something you haven't mentioned is whether you have tried booting
from your clone and having the same issues. Did you try that?
If it boots and works fine from the clone, then there could be
a corrupted file trying to be accessed at boot (possible bad sector)
on the internal drive or it could be that the drive is starting to
give out.

Mac Pro 3,1 (early 2008) RAID card hangs at startup

Hello,
I have a Mac Pro 2.8Ghz Quad Core (early 2008) with 10GB RAM and 512MB VRAM.
I have noticed that the Mac Pro RAID card hangs at startup for RAID volumes.
It seems to start okay with a single boot drive (have used both WD Raptor 150GB 10K and Seagate 'factory' 320GB 7200rpm as boot drives...)
But the RAID 0 array using two factory 1TB WD 7200rpm is what seems to hang at startup. I have run Disk Warrior, Disk Utility and RAID Utility and found no major errors...
Any suggestions? Have already replaced the RAID Card battery with OEM part.
Thanks!

Say good-bye to the Apple Pro RAID card. It started its life as a $999 card to support SAS/SCSI and/or RAID5.
Then the problems with 2.5TB drives, battery, and does it really do something and add to your system.
I would use SoftRAID and create a 3-drive mirror of 2TB drives instead.
And an SSD for the system.
Seems like those are some very old drives.
I have a lot of the 150GB 10K VR drives, and some 300GB along with older 74GB and a couple of the Raptor series. Loud and while solid I would use for spare boot drives, clone only.
Backup your data, pull the RAID card, and restore to the drives. And clone the system onto a 250GB $109 SSD. $139 buys a 400MB/sec writes and 800MB/sec reads Samsung PCIe-SSD XP941. None of my SCSI 15K drives would come close.

Database Hangs on Startup

Hi
We are using Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 .
We Restored the database on Test server from Production by using RMAN .
The problem is when we startup the database it hangs after Mount phase.
In alert log file We saw the following eror
ERROR, tran=19.10.20602, session#=1, ose=0:
ORA-03113: end-of-file on communication channel
We removed all the DBLINKS as we thought that could be the problem but the problem was same.
We found some Pending transactions in DBA_2PC_PENDING and purged all of them (19.10.20602 in the above error was part of Pending transaction)
But the database still hangs on startup .
The last entry in alert file inow is
Wed Aug 17 16:05:12 2011
QMNC started with pid=19, OS id=2803
If we leave the database in this mode it will finally comes up with "Database opened" but this is after 6 to 7 hours.
Ocassionaly we will see the following error in alert log file
Fatal NI connect error 12170.
VERSION INFORMATION:
TNS for Solaris: Version 11.1.0.6.0 - Production
Oracle Bequeath NT Protocol Adapter for Solaris: Version 11.1.0.6.0 - Pr
oduction
TCP/IP NT Protocol Adapter for Solaris: Version 11.1.0.6.0 - Production
Time: 12-AUG-2011 15:12:37
Tracing not turned on.
Tns error struct:
ns main err code: 12535
TNS-12535: TNS:operation timed out
ns secondary err code: 12606
nt main err code: 0
nt secondary err code: 0
Please help
Thanks

The strange thing is that it hangs on Database mount for long time
Total System Global Area 584761344 bytes
Fixed Size 2090792 bytes
Variable Size 159389912 bytes
Database Buffers 415236096 bytes
Redo Buffers 8044544 bytes
Database mounted.
and last entry in log file is :
Starting background process QMNC
Thu Aug 18 11:13:34 2011
QMNC started with pid=19, OS id=18043
But if I use CTRL+C
it gives me the following in sql
^CORA-01013: user requested cancel of current operation
and in alert log file now I an see "Completed: ALTER DATABASE OPEN"
Please help.

Lenovo A390 hang on startup logo

Hi there i just bought the Lenovo A390 i insert two sim card in it and when i power on the phone it hang on the startup logo ...any advice for this issues
Solved!
Go to Solution.

Please help, i have lenovo A390 hang at startup logo... there is no service center here in my city, is there any way to solve this problem?
i try enter to recovery menu but no luck, how to upgrade / re-install this android phone?
http://mobilesupport.lenovo.com/en-us/products/a390_smartphone
Thanks
Moderator Note; threads merged, link to this thread removed

Powerbook Pismo Hangs on Startup HELP!

I have a G3 pismo that hangs on startup, no matter what I've tried!
I have tried to reset the pmu. zap the pram, change out the hard drive with another one with OS 10.3.9, boot from an external hard drive with OS 10.3.9, and external cd drive with an OSX Panther install disk.
I get the "You need to restart your computer" message in the background, and what looks like a kernal panic message in the front.
The kernal is version 7.0.0.
At the bottom of the page it says "We are hanging here..."
Has anybody been through this? Am I missing something?
Any help is greatly appreciated!

Glen:
Take a look at these two articles and see if you find anything of help:
What’s a kernel panic.
Resolving Kernel Panics
Post back with further questions or comments.
Good luck.
cornelius

Indesign CS5.5 hangs on startup

Hi,
My Indesign CS5.5 (I'm running Macosx 10.6.7) hangs on startup and gets this crash log: http://pastebin.com/xDXmdrt4
I've tried removing the recovery folder, the settings prefs and the FontExplorer plugin... nothing helps.
Anyone?
/Erlandsen

Mikkel, if the problem goes away with a new account, it is almost certainly a problem with your ~/Library folder, and reinstalling InDesign does not touch that, so it is no surprise the reinstall did not help.
If you truly removed all the folders I specified, then I'm quite surprised it didn't fix it. Sometimes it is a permissions problem -- you
might check the permissions on those folders with Get Info in the Finder, and maaaaaaaybe try running Disk Utility's Repair Permissions (usually a waste of time).
If not, well, try moving *everything* out of your Library/ folder, and then putting it back bit-by-bit (well, half-by-half). This may be a somewhat unpleasant and potentially destructive process.

10.5 Server hangs on startup

Hi there,
After some maintenace I had to restart my MDD Sever but it hanged on startup. Booted again in safe mode (over 45 mins) still no luck. I can get it to boot from a sharepoint running 10.5 client. What's the best thing I can do from there? Sorry, I can't think straight anymore.

Just installed 10.5.6. No problems, following the usual apple guide to good
housekeeping:
1) close all programs
2) REPAIR disk permissions (irrespective of whether you ran it the day before).
3) Download and install software
3a) On MBP, or Macbooks, ensure your AC adaptor is connected (irrespective of whether battery is 100% or not).
4) Enter password (if asked) and install.
My Mac Pro took about 5 minutes downloading the 190mB (probably Apple is busy right now) and about 1 1/2 minutes to install.

Itunes is hanging at startup how do I fix?

Itunes is hanging at startup message cannot find ~ amazon url

Hi,
Try a Reset of the Phone...
Turn the Phone Off...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
The Apple logo will Appear and then Disappear...
Usually takes about 10 - 15 Seconds...
Turn the Phone On...
If that does not help... See the Information in this Link:
Device Frozen
http://support.apple.com/kb/ts1445
Cheers,

IMac G5 hangs on startup, won't boot from disc

Hello,
My brother's computer has been acting up and I've been unable to fix it for him...so I was hoping I might be able to get some advice here.
Problem: hangs on startup. It goes to the gray screen with the Apple logo and the spinning progress wheel like it normally would, but never gets past that. You can hear the hard drive working and eventually the fan comes on.
What I've done:
1) attempted to boot from OSX disc, same result
2) attempted to boot from Apple hardware test disc. this brings up an open firmware terminal style prompt but does not boot from the disc. using the prompts i reset pram and did the "reset all" command which restarted the computer but it continued to hang
3) opened it up and pulled the only ram chip out and put it in the other slot. Unfortunately we don't have another chip to test out, but if you guys think it is a likely culprit I'll go buy him one to see if that fixes it.
Any advice will be appreciated. Thanks!
-Alan

Do you hear the drive spinning up? Have you tried a safe bootAfter the startup tone, hold down the <shift> key until you (hopefully) reach the desktop, it will be longer than normal, because Disk Utility's "repair" is invisibly run; it also will bypass any login items. If the system gets to the desktop OK this time but stalls when the shift key is NOT held down, the problem may be some login item that will need to be removed, using the Accounts panel of System Preferences and its Login Items section.
You could try to repair the machine using Target Disk Mode to access it.

Labview 8.0.1 hangs on startup and shutdown

I have been using Labview 8.0.1 and Teststand 3.5 on my laptop for a few weeks (eval versions)
during the time I don't have access to my PXI platform.
Today when I tried to shutdown my laptop, Labview would not shut down and could
not be terminated. After 10min or so it finally shut down. After reboot of the system, labview
hangs on startup during "finishing intialization", and must be terminated. I cannot launch it at all.
Please tell me there is a way to fix it without reinstall.

Woah there! Let’s
take a step back before we take drastic measures…..
First of all, does your Laptop meet all of the minimum requirements
of the install of LabVIEW? Do you have
sufficient RAM, do you have a supported OS, and do you have a capable video driver? All of these things make a difference! Additionally, there is a way to set the NI
services (or any service for that matter) to run when needed as opposed to
automatically running on startup. To do this, open the Windows Control Panel,
and click on “Administrative Tools” and open “Services”. From here you can start and stop services, as
well as configure them to run in “manual” mode which will start them only as
needed.
There should never be a problem with uninstalling NI
Software due to NI services running. The
proper way to uninstall LabVIEW is to first shut down all NI programs you have
open. Then, go to control
panel->add/remove programs->national instruments software and choose “change”. From here you can uninstall LabVIEW by
clicking on it and selecting “remove”.
Installing 8.0.1 should have had no effect on the NI services or LabVIEW. Did you reboot and mass compile the LV directory after the
8.0.1 install? It’s also important to note
that all of the LabVIEW 8.0 installers are the same. The version of LabVIEW that is installed
depends on which version is “unlocked” based on the serial number you enter
when activating LabVIEW.
It is entirely possible that for some reason one of the NI
services is hanging, or behaving poorly.
I think you were on the right track with starting debugging from that
point. We could also try to determine
which exact service is causing problems, then determine which software that
service installed with and troubleshoot from there.
I assure you that many people are running with all sorts of
NI software combinations on their machines without these problems. If there is some problem with an NI service
on your machine, installing a new version of LabVIEW might not make a
difference anyway. I do apologize that
this has been causing you problems, and I thank you for the debugging completed
so far. I hope this information proves useful -- please let us know how things
go!
Travis M
LabVIEW R&D
National Instruments

Hangs at Startup - Excite AT305 T16

Similar Messages

Maybe you are looking for