Hangs up on incoming calls!

Half the call I receive are disconnected, I either touch the screen or touch the volume button and the call is ended. I have tried three different cases and even put the phone in my shirt pocket. I talked with a sales rep. on the website and the response I got was, find a phone you like in your price range. Frustrated I went to the local Verizon store and picked out the Thunderbolt. I guess I'm stuck with the phone until my contract is up.

There may be something in this previous thread that may assist you with Locking Up on Incoming Calls.
While it deals with blocked calls I think that it may apply to your situation as well.
http://discussions.apple.com/thread.jspa?threadID=1093612&tstart=30
mikeab

Similar Messages

How I can hang up an incoming call using the IO7 ?

I'm using the IPhone 5 , and updated to software iOS 7 ; V 7.0.2
earlier in the previous iOS6, i was able to hang up an incoming call while the screen was locked. But now i can't. The only thing possible is just mute the ringing tone.
Is it possible in the iO7 to hang up an incoming call ?

Tap the Sleep/Wake button to silence the call, a double tap sends the call straight to Voicemail.

IPhone3GS screen white and look hang, while some Incoming Call and SMS

Hi All,
I don't know what happen on my 1 months old iPhone 3GS. Its hang and Screen became white (nothing can see just white color), while some times in Incoming Call as well as SMS, at the time I can't pick up phone call and can't see sms, because of screen is WHITE.
Please help me some tips and advice.

Thanks Phil,
I feels as strange, sometime happen and sometime may not happy,
in that situation, I need to press top (lock-unlock) button and after 20 seconds, it would be ok, SMS is ok for that situation, but I've missed some incoming call.

NEW 9320! CURVE HANGS ...!DURING INCOMING CALLS! NO BUTTON WORKS! PLS HELP ME

   Recently, i was purchased New 9320. I am very much fedup with this new 9320The phone completely hangs during my incoming calls , no button works & nothing happens. . Each and every time I’ve to remove the battery & reboot 4 to 5 times.
This happened once when it was in the holster too ,said “keypad locked” and nothing except the power off button worked (the power off button did nothing to help though)
    This is frustrating ,especially for a first time Blackberry user like me
   Is it a software problem with the 7.1 OS or something else? Please any one help me.

That is what I am doing right now, but thats a short term solution. It happens 7-10 times a day. Have to do this exercise again and again.
Is not there a permanent solution for this problem ?
Thanks

I can't put call on hold to answer incomming call, always hangs up on first call

I can't put call on hold to answer incomming call, always hangs up on first call

The procedure is different, depending on whether your carrier uses CDMA or GSM. Consult the manual. gdgmacguy gives directions on how to find it in the post above.
Best of luck.

HT1222 I have iphone 4 and the software is ios 7.0.2. I am facing problems with my phone. Since the last software update my phone has started giving problems. like it hangs sometime when i recieve an incoming call. The carrier status bar shifts down a bit

I have iphone 4 and the software is ios 7.0.2. I am facing problems with my phone. Since the last software update my phone has started giving problems. like it hangs sometime when i recieve an incoming call. The carrier status bar shifts down a bit and sometimes it vanishes automatically. I,m confused.
Secondly i have an update IOS 7.0.4 waiting in my Software Update menu. I have tried so many times to update my iphone but it always fails to update the IOS 7.0.4. Any body suggest anything regarding this

Wow. Lots of help. Thanks apple

My iPhone5 is under warranty but during incoming call handset is hang. this problem 2-3 time a day. pleas help.

My iPhone5 is under warranty but during incoming call handset is hang. this problem 2-3 time a day. pleas help.

I'm experiencing what is I believe to be the same issue with my iPhone 4, and have been suffering in silence for about a week.
iPhone 4 model MC603X with Modem Firmware 04.10.01, 16Gb, cheap silicone cover, Vodafone NZ as my carrier.
My screen locks after 1 minute of inactivity as it should with my settings. Perhaps 1 call in 5, or 1 call in 10, the screen wakes up and displays called ID information etc correctly, but I cannot swipe to answer the call. The touch screen simply fails to respond.
If I push the power button briefly to silence the ringtone, this does not make a difference. The iPhone has to be locked (and screen turned off), then push a hardware button to wake up the display, and then I can swipe to unlock the device.
This is only since iOS 4.3 and unfortunately iOS 4.3.1 has not changed this behaviour.
Any advice appreciated.
Cheers, Mike

Iphone hangs when incoming call

each time my phone has an incoming call, the phone hangs. I cannot slide to answer the phone. What happens?

Hello Recently, I started experiencing problems with my iPhone 4. Sometimes, but more and more often, I can not move the slide to pick up the phone. and this is not a problem the screen, as in any other application, the screen is perfectly responsive to clicks.
and it became yet worse now - slide is moved but raising of tube does not take place. such problem I sometimes notice for the users of not dear android telephones, but I did not buy a telephone after 600$ in order that to test the same problems. when this situation happens - I look as a blockhead nervously trying to heave up a tube. more frequent than all it does not turn out and I have to ring up a subscriber.

E71 Hangs while receiving an incoming call

Hi Guys,
I have recently bought an E71 and have been facing a peculiar problem since day one. My phone at times (2 out of 10 times)hangs when receiving an incoming call and reboots automatically. On contacting the customer care I was told that I may have installed too many applications but the fact is that I am using my E71 as a very basic phone as of now - any ideas what is wrong with my handset? Is anyone else facing the same issue?
Thanks,
Nishant

My log on my E71 is set for 30 days and my phone has not hung on an incoming call at all (or anywhere else).
But I dont get lots of calls so what Mbang is saying is still valid.
There are a couple of things you could try additionally. First if the Nokia Software Updater will let you - try and reinstall the software, also you could also back up your handset and restore the phone back to factory conditions.
How to do that is here:
/discussions/board/message?board.id=communicators&thread.id=11416
Remember, if you do that - and you have not backed up then you will lose EVERYTHING on your device, pictures messages mail etc.
If its still doing it after that then it would appear that there is a problem with your E71 and I would then suggest that you take it to the nearest Nokia Repair centre.
Shunts...
I will mostly be communicating with a Nokia E72 Zodium Black
Nokia E72-1 with Vr 051.018.207.04 Software
If this post helped... Add some kudos!!

Z10 hard to hang up incoming call

why z10's screen too minimalist, so thete is no button for hang up incoming call. it is not easy to scroll down the sreen for answering incoming call. at last my incoming call become miss call. can you fix it?

My "hang up"button is right there at the bottom. When you scroll down are you putting your finger right on the bar? And... are you sill on 10.0 OS? It's a little pokey.

Help please...iphone5 when trying to make a call, after hitting green button to make call, screen goes straight back to keypad and all incoming calls go straight to voicemail, any ideas please? Everything else seems ok. No problem with sim or carrier

Hi...I have just obtained a secondhand iphone 5. I'm not technically minded and I don't understand 'geek speak' so please be gentle. I have done all I can think of to bottom this problem. I have switched on and off. Tried different o2 sims (including 2 brand new) that I know are fine, restored to factory settings, changed carrier from 'Auto' to O2 and spent ages on line with o2 chat but everything at their end is absolutely fine. Everything on the phone seems to be working apart from the phone aspect of things. All incoming calls go straight to voicemail and show on the phone as 'Cancelled calls' and when dialling out, I can key in the numbers and get the keypad tone (not dialling tone) but as soon as I press the green key to make the call, all that happens is the keypad pops back up onto the screen. The phone was bought on ebay as an o2 phone (the photo showed Giffgaff on the phone's screen but I understand this to be one and the same?) and as being 6 months old but I have put the serial number into the support website and...surprise surprise..,it must be at least twice that age as the warranty has expired. I have made 2 attempts to have a web chat with Apple Support, have reached the 'You're all set, we'll be with you in 2 mins' and have been left hanging there for over an hour on each occasion, so I've given that up as a bad job!! Any help will be much appreciated...and also, will Apple charge me £25 for each of the aborted chat attempts, please? Over to you...hopefully and many thanks in anticipation.

My phone works all fine when am in mumbai but as soon s i leave mumbai I am not able to make an otgoing call
This is entirely a carrier issue. If your carrier (airtel) doesn't provide service outside of Mumbia, this has nothing to do with your iPhone.
i feel i need to change my brand
This is a user-to-user tech support forum, not Apple. No one here cares at all about your threats.
NEVER post personal info in this public forum

PAP2T: Incoming calls being blocked by Router.

Hi,
I am trying to use an unlocked PAP2T Adapter with Telus home network in Canada and am not able to receive calls. I can make outgoing calls to any number in the world, but whenever I get a call back, the phone doesn't ring & later I find it in Firewall log as being blocked under "Low Risk Attack". While trying to find a resolution with the VOIP provider I had at times picked up the phone randomly & found the caller on the line. So apparently the calls have no prblem reaching my PAP2T Adapater, it is just that (1) there is no ring when they do & (2) the incoming calls get blocked by Firewall & dropped.
I have tried port forwarding (UDP & TCP) as well DMZ mode for the Adapter, no luck. Later i tried disabling almost all of the internet provider's 2wire modem/router firewall features (UDP ports scan, packets , etc.) still didnt work. I have run out of ideas & hoping that someone can help me find a way out of this problem ? Appreciate your help & time. Thanks.

I changed to the following settings that did the trick for making the phone ring,
Click Regional on the top:
Under Ring and Call Waiting Tone Spec
Change Ring Waveform to Sinusoid
Change Ring Voltage: 90
Change Ring Frequency: 20
However, when I pick up the ringing phone, there is no voice going through the line. Also, as per my VOIP provider instructions, when I dial a local number followed by # sing & hang up in 5 seconds, I don't get any callback either. I have even updated the PAP2T to the latest firmware 5.1.6. Any thing else I can change to get the voice across & get the call back ? thanks for your help again.

N8 Display turns totally black when incoming call ...

My N8's display always turns totally black when there is an incoming call, or even when the
alarm rings. Before can see the caller's name and answer the call, I have to disable the screen's "keylock".
I tried to find a point in the phone settings wher I can avoid this, but didn't find any. Is anybody out there to give me a hint ?
Thanx in advance

When I am inside, the screen acts normally: it goes black when held close to face. It returns to normal as soon as taken from my face. However, the screen also goes black if I am outside in daytime when I have an incoming call, and when I make calls also, as soon as I press the green call button. It "thinks" it is near my face. If I slide the button on the right side of the phone down twice, the screen lights back up normally but the touch screen will not function. At that point I cannot answer the phone, or if I'm already making a call I cannot hang up nor press the speaker phone button.
There is nothing over the face of the phone. I removed the protective plastic cover but that did not help.
This seems to occur only when I am outside in the sunlight, so it has something to do with a sensor, either light or heat.
I am aware that this problem has occurred on other N8s. I have not found any solutions for it. Perhaps it is not a problem on every N8. I updated the software last week to 111.040.1511 Symbian Belle. That software date is from 2012-07-28.

Ios 5.1 worst iphone 4s incoming call no audio for caller for 3-5 sec

i bought iphone 4s (ios 5.01) jan 2011. for the date of purchase i had problems form the date of purchase. There was no service (network issue) and i thought it would be my new sim card. but i tried it on my wife's mobile it worked well(no issue). i gave to showroom and booked for a complaint and after 2 weeks they called me and said they have updated to ios 5.0.1 (9a405). i had no more issues with the network but i had issues in outgoing calls. Whenever i call someone they wont be able to hear me for first few seconds(2-4 secs) and i stared to talk after 3 secs regularly(since the customer care is worst here i dont want to give and wait for another 3 weeks where i wont get right solution too). Later i had a ios update (ios 5.1) meesage while my phone was connected to wifi. i thought it will solve the issue (after reading some reviews) and updated to ios 5.1 which is what i am using right now. But now i have more issues than before.
1. The screen goes blank(dark screen) when i try to call back (i.e after call busy) 2-3 times. then i have to press home button and once again i have to open call button(green layer which will be on top just like on call) and hang up and try once again.
2. Sometimes my network drop zero then start searching network display no service for few second and then the network once again appear while on call(no issue with network provider i checked with other phone which is working well)
3. Now when there is incoming call there will no audio for caller(not me) for 2-5 sec (i did a count..ha..ah) they wont be able hear.
i did try reset to factory setting, no other apps installed. did try everything and nothing helped..i am also lazy to write this but no way to find a solution..pls do help and sort the issues permanently..
iphone is costly only because its an apple product and for its ios which is faliure now. so i suggest them to reduce the price and shouldnt say they are the trend setter or innovative anymore..worst ios and i have read many reviews and i know there are people who dont want to waste time/lazy by writing the review..but they need soultion..i am ashamed of my iphone which i bought 45000 rs when compared to 15000rs samsung product with no issues like these..

i have 3 problems listed below while using iphone 4s with ios 5.1 version
1. The screen goes blank(dark screen) when i try to call back (i.e redialing 2-3 times). then i have to press home button and once again i have to press call button(sometimes green layer which will be on top of the screen) and press red button to close the call and try once again.
2. Sometimes my network drop zero then start searching network then display no service for few second and then the network once again appear (no issue with the network provider i checked with other phone which is working fine)
3. When there is incoming call the people on the other end of the call (caller and not me) cant hear for first 2-5 sec (i did a count..ha..ah) they wont be able hear.
Is it clear now buddy....

An incoming call from VoIP. The SPA122 generate Dial Tone after the far end hung up rather busy tone.

Hi All!
I have a problem with the SPA122 telephony adapter, uncorrectly process the subscriber signaling at the end of the call.
1) Outbound call from FXS port SPA122 . When a remote caller hangs up first , the subscriber SPA122 Reorder Tone played with a delay specified in the Reorder Delay. This circuit is working properly.
2 ) Incoming call from VoIP to the SPA122. When a remote caller hangs up first , subscriber on the FXS port of the SPA122 hears silence ~ 3-4 seconds , then SPA122 plays Dial Tone, as if he had just picked up the phone and he 's going to call . No signal lights out (Busy Tone or Reorder Tone) will not play .
Config is attached.
Model: SPA122, LAN, 2 FXS
Hardware Version: 1.0.0 Boot Version: 1.0.1 (Oct 6 2011 - 20:04:00)
Firmware Version: 1.3.2-XU (014) Jul 2 2013
Recovery Firmware: 1.0.2 (001)
WAN MAC Address: 6C:20:56:55:3A:B6
Host Name: SPA122
Domain Name: (none)
Serial Number: CCQ16450LG3
However, other VoIP terminals registered to Huawei, including older versions of the Linksys SPA2102 work in these scenarios correctly.
Where to kick it?

[2] is misconfiguration on your's side. You have CPC turned on, but no CPC capable device. Set CPC Duration to zero to turn off CPC.
By the way, wrong forum for your question. You should consider to move it to space.

Hangs up on incoming calls!

Similar Messages

Maybe you are looking for