!!!!!!!!! Happy Diwali and Happy New Year !!!!!!!!
<font color="red">Wish You All</font>
<font color="GREEN">Happy Diwali and </font>
<font color="BLUE">Prosperous, Colorful and Joyous</font>
<font color="MAGENTA">New Year</font>
Duplicate Thread: ! @ Happy Diwali @ !
But thanks! and same to you.
Similar Messages
-
Hi Oracle Gurus, I am having a hard time at trying to fix an issue with the ASCP. We have suppliers in China and Taiwan and because of the Chinese New Year holiday we have to plan in advance and issue POs to cover the two weeks off that the holidays last. What I did was to create another plan (separate from the one we use everyday) and linked it to a special Forecast Set with the items and qties for which we want to release purchase requsitions. The recomendation worked fine, the buyers were able to open the new plan and then issue the POs, now the problem is that the whole idea was to have the orginal plan working like if the purchase reqs from the Chinese New Year hadn't been created, and that is not happening. So the plan is basically recomending to reschedule in the POs the came for the chinese plan, instead of purchase requisitions based on the current forecast. How can I make the plan "avoid" all the supplies that came from the new plan and recomend requisition as usual?
Hope you help me out.
Thanks,
CCI agree, Firm the POs on the source instance and ASCP will not advise to reschedule.
Don't forget about the possibility of Natural Time Fence being created for these items if
MSO: Firm Purchase Orders Within Time Fence = Yes
MSO: Firm Requisitions Within Time Fence = Yes
Example
with this profile setup, if the item has a PTF of 5 days but you firm the PO on day 10, then a Natural Time Fence will be created from day 10 which is beyond the 5 day PTF.
No Planned Orders will be created inside the Natural Time Fence. -
A happy and productive New Year
..... to all in this forum ..... and especially to those members who've been so helpful to me !
Kay.And to you also.
Happy New Year -
Hi Friends ! Wishing you a happy and prosperous new year with my problem !
I need your help to understand Debugging ! I really dont know Please provide me with best links according to you !
thankshi,
Please find the below points regding debugging:
Debugger
This section of the ABAP Workbench documentation provides information on how to use the Debugger as a test tool for finding errors in the source code of an ABAP program.
Functional Overview
Use
The ABAP Debugger is an integrated test tool within the ABAP Workbench. You use it to check the program logic and to find errors in the source code of an ABAP program. In the Debugger, you can step through the source code of a program. The running program is interrupted after each step, allowing you to check its processing logic and the results of individual statements.
As of Release 6.10, you can also run Business Server Pages (BSP) in the debugging mode. You can also display and set breakpoints here. Business Server Pages can be displayed in the Object Navigator when you select an appropriate application under BSP Application.
Features
The Debugger provides an efficient means of identifying errors in ABAP programs. It contains the following functions:
Ways of starting the Debugger
Choosing different views
Choosing different execution options in the Debugger
Displaying source code in the Debugger
Setting and deleting breakpoints
Setting and deleting watchpoints
Stopping a program at a particular statement or event
Displaying and changing field contents at runtime
Displaying ABAP Objects and references
Displaying and positioning strings
Setting and deleting database locks
Opening the ABAP Editor, or Object Navigator
System settings and runtime warnings
Starting the Debugger
There are two possible strategies for starting the Debugger in the ABAP Workbench:
By setting breakpoints then running the program
By running the program in debugging mode.
Setting Breakpoints
A breakpoint is a signal in a specific line of the program source code. This signal indicates to the ABAP runtime processor to stop the program at the relevant line and start the ABAP Debugger. A distinction is made between static and dynamic breakpoints. For further information about the different types of breakpoints and how to use them, refer to Breakpoints.
Direct Processing
You can start the Debugger without previously having set breakpoints. This is the best procedure to use when you want to test a program right from the beginning. It is also a useful procedure if you are not overly familiar with the program and therefore are not sure where best to set breakpoints. You can start the Debugger as follows:
From the Object Navigator
Select a report or transaction and choose Program ® Test ® Debugging.
From the ABAP Editor
Choose Program ® Execute ® Debugging (or the Debugging pushbutton).
From any screen
Choose System ® Utilities ® Debug ABAP.
From any screen
Enter /h in the command field.
Display Modes in the Debugger
When you are debugging a program, there are various display modes that you can use. All of the display modes have the same structure. The top part of the screen displays an extract of the program source code. The bottom part displays the information specifically available in that display mode. There are also pushbuttons on the screen allowing you to switch to the most frequently-used display modes.
Display Modes Available Using Pushbuttons
Fields
The scrollable field display contains the contents of up to eight fields. The contents of the three most important system fields are always displayed. This is the default display mode in the Debugger. See also Processing Fields
Table
Displays the contents of an internal table. This mode allows you to display and edit the entries in an internal table. See also Processing Internal Tables
Breakpoints
A scrollable display containing up to 30 breakpoints. Next to each breakpoint is a counter. You can also delete breakpoints in this display. See also Managing Dynamic Breakpoints
Watchpoints
You can set a watchpoint for a field so that the program is interrupted whenever the value of that field changes. This display mode contains a list of watchpoints, the fields and programs to which they are assigned, the current values of the fields, and the conditions upon which the watchpoint is activated. See also Setting Watchpoints
Calls
This mode displays the current sequence of events, and the sequence of calls up to the current breakpoint. The last active call is displayed at the top of the list; previous calls are listed in reverse chronological order. When an event (for example, START-OF-SELECTION) concludes, it is deleted from the display.
Overview
This mode displays the structure of the program. It lists its events, subroutines, and modules, and shows which sections belong to which events. It also displays the section currently being processed.
Settings
This mode displays the current Debugger settings. You can change the settings by selecting or deselecting various options. For further information, refer to Settings and Warnings
Other Display Modes
You can access other display modes by choosing Goto ® Display data object.
Single field
Displays the contents and technical attributes of a field.
Structured
field
Displays the components of a structure, along with their contents and attributes. If you double-click a component, the system displays detailed information for it.
Strings
Display the content and current length of the string. You can also display part of the content by means of offset and length.
Internal table
Displays the type, line numbers and contents of an internal table.
Object
Displays the structure of an ABAP Object.
For further information on these displays, refer to Displaying Attributes and Displaying ABAP Objects
Checking System Programs for Errors
To check a program or program component that is part of the ABAP Workbench (for example, the Screen Painter), you must use the system Debugger. To start the system Debugger, choose System ® Utilities ® Debug System from any screen. To stop the system Debugger, choose Debugger ® Debugging off.
Displaying Program Attributes
You can display the attributes Fixed Point Arithmetic, System Program, and Unicode Checks of the program that has just been executed by choosing Goto ® Further Information ® Program Attributes.
Restarting the Debugger
If you choose Debugging ® Restart, debugging mode is stopped and the system takes you to the initial screen of the last transaction you called. If, for example, you started an ABAP program in debugging mode from transaction SE38 (ABAP Editor), choosing Debugging ® Restart will take you back to the screen titled ABAP Editor: Initial Screen. If you want to restart the program in debugging mode, choose Debugging.
Breakpoints
Apart from direct execution of an ABAP program in the Debugger, it is also possible to start the Debugger call by the exact setting of a breakpoint. This is achieved by setting one or more of these breakpoints in the program. A breakpoint is a signal at a particular point in the program that tells the ABAP runtime processor to interrupt processing and start the Debugger. The program runs normally until the breakpoint is reached.
There is also a special kind of breakpoint called a watchpoint. When you use watchpoints, the Debugger is not activated until the contents of a particular field change. For further information, refer to Watchpoints.
Breakpoint Variants
The Debugger contains different breakpoint variants:
Static
The BREAK-POINT statement in an ABAP program. Static breakpoints are not normally user-specific. However, you can make them user-specific.
Directly-set
dynamic breakpoints
Can be set in the ABAP Editor or the Debugger. Dynamic breakpoints are always user-specific, and are deleted when you log off from the R/3 System.
Breakpoints
at statement
The Debugger stops the program directly before the specified statement is executed.
Breakpoints
at subroutine
The Debugger stops the program directly before the specified subroutine is called.
Breakpoint at function module
The Debugger stops the program directly before the specified function module is called.
Breakpoint at method
The Debugger stops the program directly before the specified method is called.
Breakpoints at system exceptions
The Debugger stops the program directly after a system exception, that is, after a runtime error has been intercepted.
Static Breakpoints
Static breakpoints are not normally user-specific. Once a user has inserted the statement BREAK-POINT or BREAK name in an ABAP program, the system always interrupts the program at that point for that user or only for the user name. This procedure is only useful in the development phase of an application, when the program execution is always to be interrupted at the same place. For further information, refer to Static Breakpoints.
In HTTP sessions, a static breakpoint is skipped if you did not set additional dynamic HTTP breakpoints in the editor of a BSP page. Instead, a corresponding system log entry is written, which can be checked using transaction SM21.
Dynamic Breakpoints
Dynamic breakpoints are user-specific. Therefore, you should use them if you only want the program to be interrupted when you run it yourself, not when it is being executed by other users. All dynamic breakpoints are deleted when you log off from the R/3 System.
Dynamic breakpoints are more flexible than static breakpoints, because you can deactivate or delete them at runtime. They have the following advantages:
You do not have to change the program code
You can set them even when the program is locked by another programmer
You can define a counter that only activates the breakpoint after it has been reached
Special dynamic breakpoints are useful when you want to interrupt a program directly before a particular ABAP statement, a subroutine, or an event, but do not know exactly where to find it in the source code. Event here is used to refer to the occurrence of a particular statement, for example, or calling up a method. Special dynamic breakpoints are user-specific. You can only set them in the Debugger. For further information, refer to Dynamic Breakpoints.
In HTTP sessions, the system stops both at static and dynamic breakpoints if a dynamic breakpoint was set in the editor of a BSP page before program execution.
Lifetime and Transfer of Breakpoints
A static breakpoint remains intact as long as the BREAK-POINT or BREAK-POINT name statement is not removed from the source code. Without saving, dynamic breakpoints only remain intact in the relevant internal session. However, they are effective during the entire user session, if they are saved by choosing Breakpoints ® Save in the ABAP Debugger. For more details on the subject of sessions and user sessions, refer to Modularization Techniques in the ABAP keyword documentation.
If you call an HTTP session during a user session, only the HTTP breakpoints are loaded when the HTTP session is started. You activate HTTP debugging in the ABAP Editor by choosing Utilities ® Settings ® HTTP Debugging. Depending on the setting, the system then displays either the HTTP or standard breakpoints in the Editor.
If you call an update session during a user session, breakpoints that were defined beforehand in the calling processing unit are copied to the new update session, where they can be displayed under Breakpoints. If, in the ABAP Debugger, you check Update Debugging under Settings and then, for example, call the update module func using CALL FUNCTION func IN UPDATE TASK, a new window is opened in which you can debug this function module in the update session. All the breakpoints that were set in the calling processing unit can also be processed here.
Breakpoints at Statements
You can use this special kind of dynamic breakpoint to interrupt a program directly before an ABAP statement is processed.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint at an ABAP statement:
1.Choose Breakpoint ® Breakpoint at ® Statement...
The following dialog box appears:
2.Enter the ABAP statement.
The system sets a breakpoint at all points in the program at which the ABAP statement occurs.
3.Choose ENTER.
The breakpoint applies to all lines containing the specified statement.
Result
The system confirms the breakpoint and adds it to the list in the display. When you finish your debugging session, the breakpoint is automatically deleted unless you have explicitly saved it.
Breakpoints at Subroutines
You can use this special kind of dynamic breakpoint to interrupt a program directly before a subroutine is called.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint for a subroutine:
Choose Breakpoint ® Breakpoint at ® Event/Subroutine.
The following dialog box then appears:
Enter the name of the subroutine before which you want to interrupt the program. By default, the Program field contains the name of the program that is currently active. The system sets a breakpoint wherever the specified subroutine occurs in the program code.
Choose ENTER.
Result
The system confirms the breakpoint. The breakpoint is added to the breakpoints displayed.
Breakpoints at Function Module
You can use this kind of dynamic breakpoint to interrupt a program directly before a function module is called.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint for a function module:
Choose Breakpoint ® Breakpoint at ® Function module...
The following dialog box appears:
Enter the name of the function module before which you want to interrupt the program. The system sets a breakpoint wherever the specified event, module pool, or subroutine occurs in the program code.
Choose ENTER.
Result
If you entered a valid function module name, the system confirms that the breakpoint has been set. If the function module exists in the system, the new breakpoint is added to the display list.
Breakpoints at Methods
You can use this special kind of dynamic breakpoint to interrupt a program directly before a method is called.
Prerequisites
You must be already running the program in the debugger.
Procedure
To set a breakpoint for methods:
1. Choose Breakpoint ® Breakpoint at ® Method...
The following dialog box then appears:
2. Enter the name of the method and class before which you want to interrupt the program. A breakpoint is then set each time the specified processing block appears in the source code.
3. Choose ENTER.
Result
The system confirms the breakpoint. The breakpoint is added to the list in the display.
Breakpoints at System Exceptions
You can use this special form of dynamic breakpoint to interrupt a program immediately after a runtime error has occurred.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint at a system exception:
Choose Breakpoint ® Breakpoint at ® System exception.
Result
The system confirms the breakpoint. The breakpoint is added to the breakpoints displayed.
When a system exception is triggered, a warning triangle appears in the line containing the statement that caused it. If you double-click the warning triangle, the internal name of the runtime error appears.
Static Breakpoints
You should only use static breakpoints during the development phase of an application. You must remove them from your program before you transport it.
Setting Breakpoints
To set a static breakpoint, use the ABAP statement BREAK-POINT . Place the breakpoint in the line at which you want to interrupt the program.
program RSDEBUG_01.
if SY-SUBRC 0.
break-point.
endif.
When you run the program, the runtime processor interrupts it when the breakpoints occur. You can number your breakpoints to make them easier to identify ( BREAK-POINT 1, BREAK-POINT 2 ).
Static breakpoints are not normally user-specific. The program is, therefore, always interrupted as soon as the runtime processor reaches the line containing the breakpoint. The program is interrupted regardless of the user who executes it.
However, you can set user-specific static breakpoints using the BREAK statement followed by your user name. For example, if you use the statement BREAK SMITH , the program is only interrupted when user Smith runs it. Although user-specific breakpoints appear in the program code, they are not active when other users run the program. You should, however, be careful if an application is being used by several users with the same name.
Deleting Breakpoints
Since static breakpoints apply to all users, you must remove them from the program once you have finished testing it. In the ABAP Editor, you can find breakpoints quickly by choosing Utilities ® Global search. You can also use the Extended Program Check to find them.
If you do not remove static breakpoints from your program, they will be transported to your production system. This could cause serious problems in the production system.
Dynamic Breakpoints
You can set up to 30 dynamic breakpoints without changing the program code. Dynamic breakpoints can be set either in the ABAP Editor or directly in the Debugger.
Setting Dynamic Breakpoints in the ABAP Editor
You can set dynamic breakpoints in the ABAP Editor regardless of whether you are in display or change mode. You can also set breakpoints directly from within the Debugger at runtime. To set a dynamic breakpoint in the ABAP Editor:
Position the cursor on the line of the source code at which you want to set the breakpoint.
Choose Utilities ® Breakpoints ® Set or the Stop icon. The system confirms that the breakpoint has been set.
To display a list of all dynamic breakpoints in a program, choose Utilities ® Breakpoints ® Display. You can use this list to navigate to a particular breakpoint or to delete one or more breakpoints from the program.
Setting Dynamic Breakpoints in Debugging Mode
To set a dynamic breakpoint in the Debugger:
Position the cursor on the line in which you want to set the breakpoint.
Select the line by double-clicking it or choosing Breakpoint ® Set/delete.
The system sets the breakpoint, and displays a small stop sign to the left of the relevant line. If the line already contained a breakpoint, it is deleted.
When you finish your debugging session, the breakpoint is automatically deleted unless you have explicitly saved it.
Saving Breakpoints
If you want to leave the Debugger temporarily, you can save your dynamic breakpoints so that they are still active when you return to the Debugger within the same terminal session.
To save the breakpoints that you have set in the Debugger:
Choose Breakpoint ® Save.
The system saves all of the breakpoints that you have set in the current program. These breakpoints will remain active until you either explicitly delete them or log off from the system.
You can also delete breakpoints that you have saved:
By deleting individual breakpoints from the display and then saving again. In this case, only your selected breakpoints will be deleted.
By choosing Breakpoint ® Delete all. In this case, the system deletes all dynamic breakpoints.
Managing Dynamic Breakpoints
The ABAP Debugger provides a convenient user interface for managing breakpoints. To open the breakpoint display, choose Breakpoints, or, from the menu, Goto ® Control debugging ® Breakpoints.
Example
Functions
This display mode contains the following functions for breakpoints:
Breakpoint Display
The scrollable breakpoint display contains up to 30 dynamic breakpoints. For breakpoints that you set directly, the program name and line number at which the breakpoint occurs are displayed. For special breakpoint forms, the list displays the statements, events, subroutines, and module calls at which the relevant breakpoints are set.
Counter
In the breakpoint display, you can specify a counter. When you use a counter, the breakpoint is not activated until it has been reached a specified number of times. For example, if you enter 5 for the counter, the breakpoint is not activated until it is reached for the fifth time. After the breakpoint has been activated, it remains so, and the counter no longer appears in the breakpoint display.
Deleting Breakpoints
Position the cursor on the breakpoint that you want to delete, and either double-click the line or choose Breakpoint ® Set/delete. To delete all breakpoints, choose Breakpoint ® Delete all.
Activating and Deactivating Breakpoints
Position the cursor on the breakpoint that you want to activate or deactivate and choose Breakpoint ® Activate/deactivate.
Watchpoints
Like a breakpoint, a watchpoint is an indicator in a program that tells the ABAP runtime processor to interrupt the program at a particular point. Unlike breakpoints, however, watchpoints are not activated until the contents of a specified field change. Watchpoints, like dynamic breakpoints, are user-specific, and so do not affect other users running the same program. You can only define watchpoints in the Debugger.
Use
You set watchpoints in the Debugger to monitor the contents of specific fields. They inform you when the value of a field changes. When the value changes, the Debugger interrupts the program.
Features
You can set up to five watchpoints in a program.
See also Setting Watchpoints.
You can also specify the conditions on which a watchpoint is to become active.
You can specify logical conditions between up to five conditional watchpoints.
See Specifying a Logical Expression.
You can define watchpoints as either local or global. If you define a global watchpoint, it is active in all called programs. Local watchpoints are only active in the specified program.
You can change and delete watchpoints.
See Changing Watchpoints.
You can use watchpoints to display changes to the references of strings, data and object references, and internal tables.
See Memory Monitoring with Watchpoints
Setting Watchpoints
If you want to interrupt a program when the contents of a field or structure change, use a watchpoint. You can set up to five watchpoints, including watchpoints for strings.
A watchpoint can be either local or global. Local watchpoints are only valid in the specified program. Global watchpoints are valid in the specified program, and also in all the other programs it calls.
Procedure
To set a watchpoint, start the Debugger and proceed as follows:
Choose Breakpoint ® Create watchpoint or the corresponding pushbutton. The Create Watchpoint dialog box appears:
Decide whether you want to set a local or global watchpoint.
Enter the program and the name of the field for which you want to set the watchpoint. In the Program field, the name of the program currently running is always defaulted.
If you want your watchpoint to be activated each time the contents of the field change, the definition is now complete, and you can return to the Debugger by pressing ENTER .
To create a conditional watchpoint, that is only activated when a particular situation arises, choose one of the following relational operators.
Operator
Meaning
<
Less than
<=
Less than or equal
=
Equal
<>
Not equal
=
Greater than or equal
Greater than
You can use the Comparison field option to specify whether the comparison is to be carried out with a value that you specify or with the contents of another field. Depending on your choice from step 6, enter a value or a field for the comparison.
Result
The system confirms the watchpoint and adds it to the list in the display. When you finish your debugging session, the watchpoint is automatically deleted unless you have explicitly saved it.
Specifying Logical Links
If you have more than one conditional watchpoint, you can specify a logical link between them:
OR
Only one of the specified conditions must be met
AND
All of the conditions must be met.
Changing Watchpoints
Choose Goto ® Control debugging ® Watchpoints or the Watchpoints pushbutton to display the watchpoint list. The following dialog box appears:
Choose the pencil icon in the line containing the watchpoint you want to change.
Change the watchpoint attributes in the Create/Change Watchpoint.
Choose ENTER .
Deleting Watchpoints
You cannot delete watchpoints by choosing Breakpoint ® Delete or Breakpoint ® Deactivate/activate. Instead, proceed as follows:
Choose Goto ® Control debugging ® Watchpoints or the Watchpoints pushbutton to display the watchpoint list.
Choose the trashcan icon in the line containing the watchpoint you want to delete.
Memory Monitoring with Watchpoints
You can use watchpoints to display changes to the references of strings, data and object references, and internal tables. By placing an ampersand (&) in front of the object name, you can display the reference in question in hexadecimal format. With internal tables, you can also display the table header by placing an asterisk (*) at the beginning of the name.
&objectname
Displays the references of strings, internal tables as well as data and object references
*itab
Displays the table header of the internal table itab
Example
If a watchpoint is set for the object in question at runtime, the program is stopped as soon as the reference is changed. A short dump can be intercepted in this way to stop the program being terminated when the memory is overwritten.
Analyzing Source Code
The Debugger contains an extensive range of functions that help you to analyze the source code of a program. You can step through the source code of a program in four different ways. For further information, refer to Stepping Through the Source Code
For information about functions within the source code display, see Displaying the Source Code
There are also different display modes that provide various information and display the contents of individual fields, tables, and so on:
To create a logical link between watchpoints:
Choose Goto ® Control debugging ® Watchpoints or the Watchpoints pushbutton to open the watchpoint display.
Set the Logical operator between watchpoints option.
The default value is always OR .
Reward if usefull
Sivaparvathi -
Hi Friends,
WISH YOU ALL A HAPPY AND PROSPEROUS NEW YEAR.
Regards,
G. Rajakumar.Hi Friends,
WISH YOU ALL A HAPPY AND PROSPEROUS NEW YEAR.
cheers,
Shan -
Wish you all Happy and Prosperous New year.
Cheers
Gautham.>
saslove sap wrote:
> Btw people will catch you all the way in 2012 if nothing happens
> sasl
That is why i earlier mentioned it is for you. -
!http://seriss.com/people/erco/gifs/HappyNewYear-2000.jpg!
A Very Very Happy And Prosperous New Year To All Our Forum Member. Have a wonderful journey in this New Year 2009. :)
Regards.
Satyaki De (Kolkata, India)
*01-JAN-2009 00:00:01*Certainly. We are missing you guys!
People like you, michael, billy should join once again and we will be waiting for your new post here.
Regards.
Satyaki De. -
Hi All,
Just started this thread to wish you all for new year :))
Wish you all a very happy and prosperous New Year !!!
Regards,
MonaHappy New Year! from Seoul, Korea.
Thank you all. ;)
for more SQL problems & questions, please visit
http://cafe.daum.net/oraclesqltuning -
Dear B2B user community,
Greetings!!!
Wish you a Very Happy and prosperous new year - 2013.
Regards,
DheerajWish entire B2B fraternity a Happy New Year!!
Regards,
Anuj -
To the Entire Hyperion Family,
I wish you a very happy new year-2010.
Regards,
tvmk
Edited by: tvmk on Dec 31, 2009 11:11 AMHi All,
Wish you a Very Happy and Prosperous New Year 2010 to entire Hyperion Colleagues.
Have a Nice Time..
Cheers,
UB. -
Happy New Year AE Forum participants, your help, advice and answers that Adobe does not give, makes owning After Effects a much more rewarding experience, without which I and many otheres would be lost.
May you have a Healthy, Happy and Prosperous New Year.
Sincerely,
Cris is BlissCris is Bliss wrote:
Happy New Year AE Forum participants, your help, advice and answers that Adobe does not give, makes owning After Effects a much more rewarding experience, without which I and many otheres would be lost.
May you have a Healthy, Happy and Prosperous New Year.
Sincerely,
Cris is Bliss
+1 -
Hello again world.
Just wanted to wish all of my fellow poobahs
HAPPY AND HEALTHY NEW YEAR!public class Party {
public Party() {
super();
celebrate();
public static void main(String[] args) {
Party p = new Party();
private void celebrate() {
StringBuffer sb = new StringBuffer("\u0048");
sb.append("\u0061");
sb.append("\u0070");
sb.append("\u0070");
sb.append("\u0079");
sb.append("\u0020");
sb.append("\u004E");
sb.append("\u0065");
sb.append("\u0077");
sb.append("\u0020");
sb.append("\u0059");
sb.append("\u0065");
sb.append("\u0061");
sb.append("\u0072");
sb.append("\u0021");
System.out.println(sb.toString());
} -
Verizon New Years Eve Shambles!
Dear Verizon,
I held a NYE party, in Columbia MD. All was good and everyone was having fun.
As I had decided to deck the garage out, into a 'NightClub Scene' for the final hour or so in New Years, I thought it would be good to crank some music up and through. I tested this the night before, all was good.
So, how annoyed was I when come 1030 at night, I could barely play a track from my library across the Wifi or You Tube or any other streaming service - Its not like I was hammering it with HD content was it.
It was great if i wanted to play musical statues, but I didnt - I wanted to dance with my friends and celebrate new year and my verizon service was just dreadful - So thanks, for nothing - they day I get anywhere near what verizon offer in terms of speed I ll be amazed.
Thanks
PaulFYI, you're talking to customers here.
If you had trouble using WiFi to access your home library on your home network, that wasn't a Verizon network problem. You most likely were at the limits of your WiFi range or had other WiFi interferers in your area. For example, if some of your guests had WiFi hotspots turned on, that could slow down your WiFi.
Had you tested WiFi coverage in your garage before hand?
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem. -
Happy Christmas!! Happy new year!! and Happy Happy holidays
Hi Folks ,
Wishing a Happy Happy marry christmas and Advance happy new year whom most of the people are into vacation !!Hope in india already so many left their work and in travel...
Wish you in next year 2009 Good Health , Good appetiteIf you are single , wish you find your lover , and get married soon;If you are married, wish you love each other more, and have a smart little baby;If you are a man, wish you more handsome and strongerIf you are a girl, wish you more beautiful more consideratelyWish you happy! Enjoy your life!
Although so many things will happen in our life Some times good some times bad ....But where ever we are what ever we do we should be live happily and make happily .....we dont interact each others but our thoughts may collide ,,,,,we dont call each other but our thinking may match.......Same way although we done celebrate together dont forget to send your Christmas sweets & Gifts...:-)
I hope the new year will remove all the dust that has been spread all round the globe ....and Really like to you share your CHRISTMAS celebrations !!! Dont forget to post here once coming back ..:-)
Regards
SasMerry is the glad word, marry is when you match and wed people (or ideas).
Craig has suggested on his "off line" station gathering pictures of winter and celebrations.
In fact he's running a [video contest |http://www.kyte.tv/ch/72385-friday-morning-report/292138-florida-winter]so folks can share their winters.
One of our community members shared a knowledge nugget with me in Twitter: "that my own holiday, Channukah, has some traditions like Diwali (burning an oil lamp)" for example.
This year was the first time in my life that we did that (rather than just light candles which we did as well).
I like this [picture|http://www.flickr.com/photos/marilynpratt/3131272327/] that has our neighbors Christmas lights blended with our own Channukah oil lamp.
It reminds me of the best things community can be: sharing, lightness, illumination.
Marrying (blending) to make merry (happy) is what our diverse community is all about.
Happy Holidays and a good season.
Thanks to everyone who generously wish these things regardless of where in the world they are and what they celebrate.
We salute you. -
I see that my Thunderbird account listings (in the leftmost column) are alphabetical. I want to move the bottom listing to the top. Is this possible? I'm using Windows 7. Oh, and did I mention Happy New Year?
Try this add-on:
https://addons.mozilla.org/en-US/thunderbird/addon/manually-sort-folders/
http://www.ramsden.org.uk/3_How_to_install_Add-ons_in_Thunderbird.html
Maybe you are looking for
-
Previously when I logged in to my INGdirect online bank account, the login window came up showing images and clickable hotspots. Recently, the login window changed to a text-only version. On two different computers running Firefox, the login comes up
-
Can you have two apple tvs on one wireless network?
Can two or more Apple TVs exist on one wireless newtork?
-
Restoring Lightroom after Hard Drive failure
I had Lightroom 3.x on my iMac and MacBook Pro. My laptop Hard drive died, and now I'd like to reinstall the software. I don't have a disk (I did the install from Adobe), did not bother with time machine (since I store everything important on my NA
-
Business service or Business system??
Hello All, I do get confused with respect to Business service and Business system?? What differentiates between them and when accordingly are they used?? If I am using a HTTP adapter to connect to a URL address of a 3rd party system, what would
-
Is their a way to make a button automatically scroll to the top of the page other than using anchors. I currently have a button setup on a master page that should scroll the browser back to the top of the page and have this applied to over 50 product