Happy For Statement Question

Greetings,
I have this code I'm trying to deeply understand....
for(int i=0;i<2;i++){
            for(int j=0;j<3;j++){
                System.out.println("i= :" + i + " j= :" + j );
            }THIS IS THE OUTPUT:
i= :0 j= :2 // < ----------- my question begins at this location????
i= :1 j= :0
i= :1 j= :1
i= :1 j= :2
Question for you:
Why is J=2 on the very first go around???? Shouldn't J=0 on the first go around???? Please help me understand why this is not the case.
Thank you for your help
-Wiley

life would be a bit dull without this outlet.you guys really need a life ...
(not that I'd be any better)My friends, family, and numerous counselors are doing anything they can
to try and get me away from this machine.
But they'll never tear me away; NEVER!!! Hahahahahahahaha!!!! <shrill maniacal laughter>
Just kidding! ;-)
lutha

Similar Messages

For statement question

Is there any way I can do this:
var photo1:MovieClip = this["pol" + n].photo_mc;
for (var n = 1; n < 10; n++) {
this["pol" + n].photo_mc;
I have a movie clip (photo_mc) and that one movie clip is
inside 9 movie clips labeled pol1 through pol9.
Right now, if I just write:
var photo1:MovieClip = pol1.photo_mc;
it does reference the photo_mc movie clip. I need it to
reference the other photo_mc's however in the other numbered "pol"
+ n....
Any help would be great!
Thanks!

yes, if you swap the first and second lines. The var
photo1:MovieClip = this["pol"+n].photo_mc; doesn't have an "n" for
reference, as its outside the loop.
Of course, you are going to want 9 different variables as
well... so:
var photo1:MovieClip, photo2:MovieClip, photo3:MovieClip,
photo4:MovieClip, photo5:MovieClip, photo6:MovieClip,
photo7:MovieClip, photo8:MovieClip, phopto9:MovieClip;
for(var n:Number=1 ; n < 10 ; n++){
this["photo"+n] = this["pol"+n].photo_mc;
The first block is only necessary if you are using
Actionscript 3 (as all of the variables need to be declared before
you use them). If you are using Actionscript 2, then you only need
the for loop.

I did not find the right place for my question but Is Apple's products are shipped to the Gulf States by a company Aramex ?

I did not find the right place for my question but Is Apple's products are shipped to the Gulf States by Aramex ?

An absolute URL will be a complete URL, it traces from the abosulte root of a file's location on a server...
http://www.thesite.com/assets/images/Front_Page_Rotating_Banner/banners.xml
A relative URL is anything short of including the http://domain..., and is read relative to wherever the file using it exists
assets/images/Front_Page_Rotating_Banner/banners.xml
In Flash files though, relative links need to be specified relative to the HTML page that embeds the swf. So if the swf is in a different folder than the html page that embeds it, the swf's targeting must be adjusted as if it were actually in the html file's folder.

Bad Stats on threads for unanswered questions

There seems to be a bug in the thread view for unanswered questions that says
This question is not answered. Helpful answers available: 5. Correct answers available: 1.
for any unanswered questions. The 5 and 1 numbers are fixed text and never change, like they are placeholders for some calculation that was going to be implemented to count posts flagged as helpful / correct that was never implemented.
Also, it would be nice when replying to a post if the new page displayed contained the original post being replied to at the top for reference and copy/paste whlie composing the replies. This is pretty standard functionality on public message boards.

It's amazing how many newbies to the forum come on and complain about the way it works before even getting any proper knowledge of it. Did you really think that something as basic as those things would not have been considered before?
user5700482 wrote:
There seems to be a bug in the thread view for unanswered questions that says
This question is not answered. Helpful answers available: 5. Correct answers available: 1.
for any unanswered questions. The 5 and 1 numbers are fixed text and never change, like they are placeholders for some calculation that was going to be implemented to count posts flagged as helpful / correct that was never implemented.The 5 and 1 numbers relate to how many helpfule and correct answers are yet to be awarded by the questioner, so if it says 5 and 1, they have not yet marked anything as correct or helpful (i.e. there's still 1 correct answer to be awarded and still 5 helpful answers to be awarded).
Also, it would be nice when replying to a post if the new page displayed contained the original post being replied to at the top for reference and copy/paste whlie composing the replies. This is pretty standard functionality on public message boards.If you've clicked to reply to a particular post then it's shown below the editor on your reply screen, and you don't need to copy and paste as you can click the quote button in the editor (the quotation marks) and it'll embed the original post at the top of your editor text, surrounded by quote tags etc. It's standard functionality, and it's already there.

HT5312 It is asking for security question answers which I have never done and I have bought a lot of music from my I tunes account, now I am locked out and this is beyond annoying at this point since I have done it the same way 100+ times and it states ne

For the first time it asked me to answer security questions which I have never done before and now I am locked out, please help me get back into my itunes account so I can buy songs

The Three Best Alternatives for Security Questions and Rescue Mail
     If you do not have success with one, then try another:
        1. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
        2. Call Apple Support in your country: Customer Service: Contact Apple support.
        3. Rescue email address and how to reset Apple ID security questions.
A substitute for using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

Can any one give me answer for these questions

Can any one give me answer for these questions. I got these questions from net plz post the answers you know
ABAP CERTIFICATION QUESTIONS
1. If a table does not have MANDT as part of the primary key, it is ____.
A: A structure
B: Invalid
C: Client-independent
D: Not mandatory
2. In regard to CALL, which of the following is NOT a valid statement?
A: CALL FUNCTION
B: CALL SCREEN
C: CALL TRANSACTION
D: CALL PROGRAM
3. Name the type of ABAP Dictionary table that has these characteristics:
Same number of fields as the database table
Same name as database table
Maps 1:1 to database table
A: Pooled
B: Cluster
C: Transparent
D: View
4. An event starts with an event keyword and ends with:
A: Program execution.
B: END-OF-EVENT.
C: Another event keyword.
D: END-EVENT.
5. What is the system field for the current date?
A: SY-DATUM
B: SY-DATE
C: SY-DATID
D: SY-SDATE
6. The following code indicates:
SELECT fld1 fld2 FROM tab1 APPENDING TABLE itab
WHERE fld1 IN sfld1.
A: Add rows to the existing rows of itab.
B: Add rows to itab after first deleting any existing rows of itab.
C: Select rows from tab1 for matching itab entries.
D: Nothing, this is a syntax error.
7. You may change the following data object as shown below so that it equals 3.14.
CONSTANTS: PI type P decimals 2 value '3.1'.
PI = '3.14'.
A: True
B: False
8. The SAP service that ensures data integrity by handling locking is called:
A: Update
B: Dialog
C: Enqueue/Dequeue
D: Spool
9. Which of these sentences most accurately describes the GET VBAK LATE. event?
A: This event is processed before the second time the GET VBAK event is processed.
B: This event is processed after all occurrences of the GET VBAK event are completed.
C: This event will only be processed after the user has selected a basic list row.
D: This event is only processed if no records are selected from table VBAK.
10. Which of the following is not a true statement in regard to a hashed internal table type?
A: Its key must always be UNIQUE.
B: May only be accessed by its key.
C: Response time for accessing a row depends on the number of entries in the table.
D: Declared using internal table type HASHED TABLE.
11. TO include database-specific SQL statements within an ABAP program, code them between:
A: NATIVE SQL_ENDNATIVE.
B: DB SQL_ENDDB.
C: SELECT_ENDSELECT.
D: EXEC SQL_ENDEXEC.
12. To measure how long a block of code runs, use the ABAP statement:
A: GET TIME .
B: SET TIME FIELD .
C: GET RUN TIME FIELD .
D: SET CURSOR FIELD .
13. When a secondary list is being processed, the data of the basic list is available by default.
A: True
B: False
14. Given:
DATA: BEGIN OF itab OCCURS 10,
qty type I,
END OF itab.
DO 25 TIMES. itab-qty = sy-index. APPEND itab. ENDDO.
LOOP AT itab WHERE qty > 10.
WRITE: /1 itab-qty.
ENDLOOP.
This will result in:
A: Output of only those itab rows with a qty field less than 10
B: Output of the first 10 itab rows with a qty field greater than 10
C: A syntax error
D: None of the above
15. After a DESCRIBE TABLE statement SY-TFILL will contain
A: The number of rows in the internal table.
B: The current OCCURS value.
C: Zero, if the table contains one or more rows.
D: The length of the internal table row structure.
16. You may declare your own internal table type using the TYPES keyword.
A: True
B: False
17. After adding rows to an internal table with COLLECT, you should avoid adding more rows with APPEND.
A: True
B: False
18. Which of the following is not a component of control break processing when looping at an internal table?
A: AT START OF
B: AT FIRST
C: AT LAST
D: AT NEW
19. A dictionary table is made available for use within an ABAP program via the TABLES statement.
A: True
B: False
20. Which of the following would be best for hiding further selection criteria until a function is chosen?
A: AT NEW SELECTION-SCREEN
B: SELECTION-SCREEN AT LINE-SELECTION
C: SUBMIT SELECTION-SCREEN
D: CALL SELECTION-SCREEN
21. What must you code in the flow logic to prevent a module from being called unless a field contains a non-initial value (as determined by its data type)?
A: ON INPUT
B: CHAIN
C: FIELD
D: ON REQUEST
22. The AT USER-COMMAND event is triggered by functions defined in the ____.
A: screen painter
B: ABAP report
C: menu painter status
D: ABAP Dictionary
23. In regard to a function group, which of the following is NOT a true statement?
A: Combines similar function modules.
B: Shares global data with all its function modules.
C: Exists within the ABAP workbench as an include program.
D: Shares subroutines with all its function modules.
24. In regard to SET PF-STATUS, you can deactivate unwanted function codes by using ____.
A: EXCLUDING
B: IMMEDIATELY
C: WITHOUT
D: HIDE
25. In regard to data transported in PAI when the FIELD statement is used, which of the following is NOT a true statement?
A: Fields in PBO are transported directly from PAI.
B: Fields with identical names are transported to the ABAP side.
C: Fields not defined in FIELD statements are transported first.
D: Fields that are defined in FIELD statements are transported when their corresponding module is called.
26. The order in which an event appears in the ABAP code determines when the event is processed.
A: True
B: False
27. A field declared as type T has the following internal representation:
A: SSMMHH
B: HHMMSS
C: MMHHSS
D: HHSSMM
28. Which of the following is NOT a component of the default standard ABAP report header?
A: Date and Time
B: List title
C: Page number
D: Underline
29. Assuming a pushbutton with function code 'FUNC' is available in the toolbar of a list report, what event is processed when the button is clicked?
A: AT USER-COMMAND.
B: AT PFn.
C: AT SELECTION-SCREEN.
D: END-OF-SELECTION.
30. In regard to field selection, what option of the SELECT statement is required?
A: FOR ALL ENTRIES
B: WHERE
C: INTO
D: MOVE-CORRESPONDING
31. The following program outputs what?
report zjgtest1
write: /1 'Ready_'.
PARAMETER: test.
INITIALIZATION.
write: /1 'Set_'.
START-OF-SELECTION.
write: /1 'GO!!'.
A: Set_ GO!! (each on its own line)
B: Set_ Ready_ GO!! (all on their own lines)
C: Ready_ GO!! (each on its own line)
D: Ready_ Set_ GO!! (all on their own lines)
32. To declare a selection criterion that does not appear on the selection screen, use:
A: NO-DISPLAY
B: INVISIBLE
C: MODIF ID
D: OBLIGATORY
33. An internal table that is nested within another internal table should not contain a header line.
A: True
B: False
34. What is output by the following code?
DATA: BEGIN OF itab OCCURS 0, letter type c, END OF itab.
itab-letter = 'A'. APPEND itab. itab-letter = 'B'. APPEND itab.
itab-letter = 'C'. APPEND itab. itab-letter = 'D'. APPEND itab.
LOOP AT itab.
SY-TABIX = 2.
WRITE itab-letter.
EXIT.
ENDLOOP.
A: A
B: A B C D
C: B
D: B C D
35. To select all database entries for a certain WHERE clause into an internal table in one step, use
A: SELECT_INTO TABLE itab_
B: SELECT_INTO itab_
C: SELECT_APPENDING itab
D: SELECT_itab_
36. After a successful SELECT statement, what does SY-SUBRC equal?
A: 0
B: 4
C: 8
D: Null
37. This selection screen syntax forces the user to input a value:
A: REQUIRED-ENTRY
B: OBLIGATORY
C: DEFAULT
D: SELECTION-SCREEN EXCLUDE
38. If the following code results in a syntax error, the remedy is:
DATA: itab TYPE SORTED TABLE OF rec_type WITH UNIQUE KEY field1
WITH HEADER LINE.
itab-field1 = 'Company'. itab-field2 = '1234'. INSERT TABLE itab.
itab-field1 = 'Bank'. itab-field2 = 'ABC'. INSERT TABLE itab.
SORT itab.
LOOP AT itab.
write: /1 itab-field1, itab-field2.
ENDLOOP.
A: There is no syntax error here
B: Remove the SORT statement
C: Change INSERT to APPEND
D: Add a WHERE clause to the loop
39. If this code results in an error, the remedy is:
SELECT fld1 fld2 FROM tab1 WHERE fld3 = pfld3.
WRITE: /1 tab1-fld1, tab1-fld2.
ENDSELECT.
A: Add a SY-SUBRC check.
B: Change the WHERE clause to use fld1 or fld2.
C: Remove the /1 from the WRITE statement.
D: Add INTO (tab1-fld1, tab1-fld2).
40. When modifying an internal table within LOOP AT itab. _ ENDLOOP. you must include an index number.
A: True
B: False
41. To allow the user to enter values on the screen for a list field, use:
A: OPEN LINE.
B: SET CURSOR FIELD.
C: WRITE fld AS INPUT FIELD.
D: FORMAT INPUT ON.
42. Before a function module may be tested, it must first be:
A: Linked
B: Authorized
C: Released
D: Active
43. To include a field on your screen that is not in the ABAP Dictionary, which include program should contain the data declaration for the field?
A: PBO module include program
B: TOP include program
C: PAI module include program
D: Subroutine include program
44. If a table contains many duplicate values for a field, minimize the number of records returned by using this SELECT statement addition.
A: MIN
B: ORDER BY
C: DISTINCT
D: DELETE
45. The system internal table used for dynamic screen modification is named:
A: ITAB
B: SCREEN
C: MODTAB
D: SMOD
46. Within the source code of a function module, errors are handled via the keyword:
A: EXCEPTION
B: RAISE
C: STOP
D: ABEND
47. Which system field contains the contents of a selected line?
A: SY-CUCOL
B: SY-LILLI
C: SY-CUROW
D: SY-LISEL
48. The following statement writes what type of data object?
WRITE: /1 'Total Amount:'.
A: Text literal
B: Text variable
C: In-code comment
D: Text integer
49. For the code below, second_field is of what data type?
DATA: first_field type P, second_field like first_field.
A: P
B: C
C: N
D: D
50. Which of the following describes the internal representation of a type D data object?
A: DDMMYYYY
B: YYYYDDMM
C: MMDDYYYY
D: YYYYMMDD
51. A BDC program is used for all of the following except:
A: Downloading data to a local file
B: Data interfaces between SAP and external systems
C: Initial data transfer
D: Entering a large amount of data
52. In regard to PERFORM, which of the following is NOT a true statement?
A: May be used within a subroutine.
B: Requires actual parameters.
C: Recursive calls are allowed in ABAP.
D: Can call a subroutine in another program.
53. What is the transaction code for the ABAP Editor?
A: SE11
B: SE38
C: SE36
D: SE16
54. In regard to HIDE, which of the following is NOT a true statement?
A: Saves the contents of variables in relation to a list line's row number.
B: The hidden variables must be output on a list line.
C: The HIDE area is retrieved when using the READ LINE statement.
D: The HIDE area is retrieved when an interactive event is triggered.
55. Database locks are sufficient in a multi-user environment.
A: True
B: False
56. The complete technical definition of a table field is determined by the field's:
A: Domain
B: Field name
C: Data type
D: Data element
57. In regard to LEAVE, which of the following is NOT a true statement?
A: May be used to return immediately to a calling program.
B: May be used to stop the current loop pass and get the next.
C: May be used to start a new transaction.
D: May be used to go to the next screen.
58. The following code indicates:
SELECT fld6 fld3 fld2 fld1 FROM tab1 INTO CORRESPONDING FIELDS OF TABLE itab
WHERE fld3 = pfld3.
A: The order of the fields in itab does not matter.
B: Fill the header line of itab, but not the body.
C: Table itab can only contain fields also in table tab1.
D: None of the above.
59. The ABAP statement below indicates that the program should continue with the next line of code if the internal table itab:
CHECK NOT itab[] IS INITIAL.
A: Contains no rows
B: Contains at least one row
C: Has a header line
D: Has an empty header line
60. What will be output by the following code?
DATA: BEGIN OF itab OCCURS 0, fval type i, END OF itab.
itab-fval = 1. APPEND itab.
itab-fval = 2. APPEND itab.
FREE itab.
WRITE: /1 itab-fval.
A: 2
B: 0
C: blank
D: 1
61. To allow the user to enter a range of values on a selection screen, use the ABAP keyword:
A: DATA.
B: RANGES.
C: PARAMETERS.
D: SELECT-OPTIONS.
62. If an internal table is declared without a header line, what else must you declare to work with the table's rows?
A: Another internal table with a header line.
B: A work area with the same structure as the internal table.
C: An internal table type using the TYPES statement.
D: A PARAMETER.
63. Assuming an internal table contains 2000 entries, how many entries will it have after the following line of code is executed?
DELETE itab FROM 1500 TO 1700.
A: This is a syntax error.
B: 1801
C: 1800
D: 1799
64. To remove lines from a database table, use ____.
A: UPDATE
B: MODIFY
C: ERASE
D: DELETE
65. All of the following may be performed using SET CURSOR except:
A: Move the cursor to a specific field on a list.
B: Move the cursor to a specific list line.
C: Move the cursor to a specific pushbutton, activating that function.
D: Move the cursor to a specific row and column on a list.
66. When is it optional to pass an actual parameter to a required formal parameter of a function module?
A: The actual parameter is type C.
B: The formal parameter contains a default value.
C: The formal parameter's \"Reference\" attribute is turned on.
D: It is never optional.
67. Coding two INITIALIZATION events will cause a syntax error.
A: True
B: False
68. Adding a COMMIT WORK statement between SELECT_ENDSELECT is a good method for improving performance.
A: True
B: False
69. To save information on a list line for use after the line is selected, use this keyword.
A: APPEND
B: EXPORT
C: WRITE
D: HIDE
70. To bypass automatic field input checks, include this in PAI.
A: AT EXIT-COMMAND
B: ON INPUT
C: ON REQUEST
D: LEAVE TO SCREEN 0.
71. Within a function module's source code, if the MESSAGE_RAISING statement is executed, all of the following system fields are filled automatically except:
A: SY-MSGTY
B: SY-MSGNO
C: SY-MSGV1
D: SY-MSGWA
72. The following code indicates:
REPORT ZLISTTST.
START-OF-SELECTION.
WRITE: text-001.
FORMAT HOTSPOT ON.
WRITE: text-002.
FORMAT HOTSPOT OFF.
AT LINE-SELECTION.
WRITE / text-003.
A: Text-002 may not be selected.
B: The value of text-002 is stored in a special memory area.
C: Text-002 may be clicked once to trigger the output of text-003.
D: None of the above.
73. The ____ type of ABAP Dictionary view consists of one or more transparent tables and may be accessed by an ABAP program using Open SQL.
A: Database view
B: Projection view
C: Help view
D: Entity view
74. A concrete field is associated with a field-symbol via ABAP keyword
A: MOVE
B: WRITE
C: ASSIGN
D: VALUE
75. The output for the following code will be:
report zabaprg.
DATA: char_field type C.
char_field = 'ABAP data'.
WRITE char_field.
A: ABAP data
B: A
C: Nothing, there is a syntax error
D: None of the above
76. Page footers are coded in the event:
A: TOP-OF-PAGE.
B: END-OF-SELECTION.
C: NEW-PAGE.
D: END-OF-PAGE.
77. The event AT SELECTION-SCREEN OUTPUT. occurs before the selection screen is displayed and is the best event for assigning default values to selection criteria.
A: True
B: False
78. The TABLES statement declares a data object.
A: True
B: False
79. Assuming tab1-fld7 is not a key field, how can you prevent reading all the table rows?
SELECT fld1 fld2 fld3 FROM tab1 INTO (fld4, fld5, fld6)
WHERE fld7 = pfld7.
WRITE: /1 fld4, fld5, fld6.
ENDSELECT.
A: Take fld7 out of the WHERE clause.
B: Create an index in the ABAP Dictionary for tab1-fld7.
C: Use INTO TABLE instead of just INTO.
D: Take the WRITE statement out of the SELECT_ENDSELECT.
80. Which of the following is NOT a required attribute when creating an ABAP program?
A: Application
B: Title
C: Status
D: Type
81. When creating a transparent table in the ABAP Dictionary, which step automatically creates the table in the underlying database?
A: Adding technical settings to the table
B: Checking the table syntax
C: Saving the table
D: Activating the table
82. Within the ABAP program attributes, Type = 1 represents:
A: INCLUDE program
B: Online program
C: Module pool
D: Function group
E: Subroutine pool
83. If this code results in an error, the remedy is:
SELECT fld1 SUM( fld1 ) FROM tab1 INTO_
A: Remove the spaces from SUM( fld1 ).
B: Move SUM( fld1 ) before fld1.
C: Add GROUP BY f1.
D: Change to SUM( DISTINCT f1 ).
84. Which keyword adds rows to an internal table while accumulating numeric values?
A: INSERT
B: APPEND
C: COLLECT
D: GROUP
85. Assuming itab has a header line, what will be output by the following code?
READ TABLE itab INDEX 3 TRANSPORTING field1.
WRITE: /1 itab-field1, itab-field2.
A: The contents of the third row's itab-field1.
B: The contents of the third row's itab-field1 and itab-field2.
C: The contents of the third row's itab-field2.
D: Nothing.
86. The following code indicates:
SELECTION-SCREEN BEGIN OF BLOCK B1.
PARAMETERS: myparam(10) type C,
Myparam2(10) type N,
SELECTION-SCREEN END OF BLOCK.
A: Draw a box around myparam and myparam2 on the selection screen.
B: Allow myparam and myparam2 to be ready for input during an error dialog.
C: Do not display myparam and myparam2 on the selection screen.
D: Display myparam and myparam2 only if both fields have default values.
87. Which statement will sort the data of an internal table with fields FRUIT, QTY, and PRICE so that it appears as follows?
FRUIT QTY PRICE
Apples 12 22.50
Apples 9 18.25
Oranges 15 17.35
Bananas 20 10.20
Bananas 15 6.89
Bananas 5 2.75
A: SORT itab DESCENDING BY QTY PRICE.
B: SORT itab BY PRICE FRUIT.
C: SORT itab.
D: SORT itab BY PRICE DESCENDING.
88. Which keyword adds a line anywhere within an internal table?
A: APPEND
B: MODIFY
C: ADD
D: INSERT
89. To read a single line of an internal table, use the following:
A: LOOP AT itab. _ ENDLOOP.
B: READ itab.
C: SELECT SINGLE * FROM itab.
D: READ TABLE itab.
90. Which Open SQL statement should not be used with cluster databases?
A: UPDATE
B: MODIFY
C: DELETE
D: INSERT
91. To include a field on your screen that is not in the ABAP Dictionary, which include program should contain the data declaration for the field?
A: PBO module include program
B: TOP include program
C: PAI module include program
D: Subroutine include program
92. This flow logic statement is used to make multiple fields open for input after an error or warning message.
A: GROUP
B: FIELD-GROUP
C: CHAIN
D: LOOP AT SCREEN
93. Given:
PERFORM subroutine USING var.
The var field is known as what type of parameter?
A: Formal
B: Actual
C: Static
D: Value

ANSWERS :
1. If a table does not have MANDT as part of the primary key, it is ____.
A: A structure
B: Invalid
C: Client-independent
D: Not mandatory
Ans : C
2. In regard to CALL, which of the following is NOT a valid statement?
A: CALL FUNCTION
B: CALL SCREEN
C: CALL TRANSACTION
D: CALL PROGRAM
Ans : D
3. Name the type of ABAP Dictionary table that has these characteristics:
Same number of fields as the database table
Same name as database table
Maps 1:1 to database table
A: Pooled
B: Cluster
C: Transparent
D: View
Ans : C
4. An event starts with an event keyword and ends with:
A: Program execution.
B: END-OF-EVENT.
C: Another event keyword.
D: END-EVENT.
Ans: C
5. What is the system field for the current date?
A: SY-DATUM
B: SY-DATE
C: SY-DATID
D: SY-SDATE
Ans : A
6. The following code indicates:
SELECT fld1 fld2 FROM tab1 APPENDING TABLE itab
WHERE fld1 IN sfld1.
A: Add rows to the existing rows of itab.
B: Add rows to itab after first deleting any existing rows of itab.
C: Select rows from tab1 for matching itab entries.
D: Nothing, this is a syntax error.
Ans : B
7. You may change the following data object as shown below so that it equals 3.14.
CONSTANTS: PI type P decimals 2 value '3.1'.
PI = '3.14'.
A: True
B: False
Ans : B
8. The SAP service that ensures data integrity by handling locking is called:
A: Update
B: Dialog
C: Enqueue/Dequeue
D: Spool
Ans : C
9. Which of these sentences most accurately describes the GET VBAK LATE. event?
A: This event is processed before the second time the GET VBAK event is processed.
B: This event is processed after all occurrences of the GET VBAK event are completed.
C: This event will only be processed after the user has selected a basic list row.
D: This event is only processed if no records are selected from table VBAK.
Ans :
10. Which of the following is not a true statement in regard to a hashed internal table type?
A: Its key must always be UNIQUE.
B: May only be accessed by its key.
C: Response time for accessing a row depends on the number of entries in the table.
D: Declared using internal table type HASHED TABLE.
Ans : C
11. TO include database-specific SQL statements within an ABAP program, code them between:
A: NATIVE SQL_ENDNATIVE.
B: DB SQL_ENDDB.
C: SELECT_ENDSELECT.
D: EXEC SQL_ENDEXEC.
Ans : D
12. To measure how long a block of code runs, use the ABAP statement:
A: GET TIME .
B: SET TIME FIELD .
C: GET RUN TIME FIELD .
D: SET CURSOR FIELD .
Ans : C
13. When a secondary list is being processed, the data of the basic list is available by default.
A: True
B: False
Ans : B
14. Given:
DATA: BEGIN OF itab OCCURS 10,
qty type I,
END OF itab.
DO 25 TIMES. itab-qty = sy-index. APPEND itab. ENDDO.
LOOP AT itab WHERE qty > 10.
WRITE: /1 itab-qty.
ENDLOOP.
This will result in:
A: Output of only those itab rows with a qty field less than 10
B: Output of the first 10 itab rows with a qty field greater than 10
C: A syntax error
D: None of the above
Ans : B
15. After a DESCRIBE TABLE statement SY-TFILL will contain
A: The number of rows in the internal table.
B: The current OCCURS value.
C: Zero, if the table contains one or more rows.
D: The length of the internal table row structure.
Ans ; A
16. You may declare your own internal table type using the TYPES keyword.
A: True
B: False
Ans : A
17. After adding rows to an internal table with COLLECT, you should avoid adding more rows with APPEND.
A: True
B: False
Ans : A
18. Which of the following is not a component of control break processing when looping at an internal table?
A: AT START OF
B: AT FIRST
C: AT LAST
D: AT NEW
Ans : A
19. A dictionary table is made available for use within an ABAP program via the TABLES statement.
A: True
B: False
Ans : A
20. Which of the following would be best for hiding further selection criteria until a function is chosen?
A: AT NEW SELECTION-SCREEN
B: SELECTION-SCREEN AT LINE-SELECTION
C: SUBMIT SELECTION-SCREEN
D: CALL SELECTION-SCREEN
Ans : D
21. What must you code in the flow logic to prevent a module from being called unless a field contains a non-initial value (as determined by its data type)?
A: ON INPUT
B: CHAIN
C: FIELD
D: ON REQUEST
Ans : A
22. The AT USER-COMMAND event is triggered by functions defined in the ____.
A: screen painter
B: ABAP report
C: menu painter status
D: ABAP Dictionary
Ans : C
23. In regard to a function group, which of the following is NOT a true statement?
A: Combines similar function modules.
B: Shares global data with all its function modules.
C: Exists within the ABAP workbench as an include program.
D: Shares subroutines with all its function modules.
Ans ; C
24. In regard to SET PF-STATUS, you can deactivate unwanted function codes by using ____.
A: EXCLUDING
B: IMMEDIATELY
C: WITHOUT
D: HIDE
Ans : A
25. In regard to data transported in PAI when the FIELD statement is used, which of the following is NOT a true statement?
A: Fields in PBO are transported directly from PAI.
B: Fields with identical names are transported to the ABAP side.
C: Fields not defined in FIELD statements are transported first.
D: Fields that are defined in FIELD statements are transported when their corresponding module is called.
Ans ; C
26. The order in which an event appears in the ABAP code determines when the event is processed.
A: True
B: False
Ans : B
27. A field declared as type T has the following internal representation:
A: SSMMHH
B: HHMMSS
C: MMHHSS
D: HHSSMM
Ans : B
28. Which of the following is NOT a component of the default standard ABAP report header?
A: Date and Time
B: List title
C: Page number
D: Underline
Ans ; A
29. Assuming a pushbutton with function code 'FUNC' is available in the toolbar of a list report, what event is processed when the button is clicked?
A: AT USER-COMMAND.
B: AT PFn.
C: AT SELECTION-SCREEN.
D: END-OF-SELECTION.
Ans : A
30. In regard to field selection, what option of the SELECT statement is required?
A: FOR ALL ENTRIES
B: WHERE
C: INTO
D: MOVE-CORRESPONDING
Ans : B
31. The following program outputs what?
report zjgtest1
write: /1 'Ready_'.
PARAMETER: test.
INITIALIZATION.
write: /1 'Set_'.
START-OF-SELECTION.
write: /1 'GO!!'.
A: Set_ GO!! (each on its own line)
B: Set_ Ready_ GO!! (all on their own lines)
C: Ready_ GO!! (each on its own line)
D: Ready_ Set_ GO!! (all on their own lines)
Ans : C
32. To declare a selection criterion that does not appear on the selection screen, use:
A: NO-DISPLAY
B: INVISIBLE
C: MODIF ID
D: OBLIGATORY
Ans : A
33. An internal table that is nested within another internal table should not contain a header line.
A: True
B: False
Ans : B
34. What is output by the following code?
DATA: BEGIN OF itab OCCURS 0, letter type c, END OF itab.
itab-letter = 'A'. APPEND itab. itab-letter = 'B'. APPEND itab.
itab-letter = 'C'. APPEND itab. itab-letter = 'D'. APPEND itab.
LOOP AT itab.
SY-TABIX = 2.
WRITE itab-letter.
EXIT.
ENDLOOP.
A: A
B: A B C D
C: B
D: B C D
Ans : A
35. To select all database entries for a certain WHERE clause into an internal table in one step, use
A: SELECT_INTO TABLE itab_
B: SELECT_INTO itab_
C: SELECT_APPENDING itab
D: SELECT_itab_
36. After a successful SELECT statement, what does SY-SUBRC equal?
A: 0
B: 4
C: 8
D: Null
Ans : A
37. This selection screen syntax forces the user to input a value:
A: REQUIRED-ENTRY
B: OBLIGATORY
C: DEFAULT
D: SELECTION-SCREEN EXCLUDE
Ans : B
38. If the following code results in a syntax error, the remedy is:
DATA: itab TYPE SORTED TABLE OF rec_type WITH UNIQUE KEY field1
WITH HEADER LINE.
itab-field1 = 'Company'. itab-field2 = '1234'. INSERT TABLE itab.
itab-field1 = 'Bank'. itab-field2 = 'ABC'. INSERT TABLE itab.
SORT itab.
LOOP AT itab.
write: /1 itab-field1, itab-field2.
ENDLOOP.
A: There is no syntax error here
B: Remove the SORT statement
C: Change INSERT to APPEND
D: Add a WHERE clause to the loop
Ans :
39. If this code results in an error, the remedy is:
SELECT fld1 fld2 FROM tab1 WHERE fld3 = pfld3.
WRITE: /1 tab1-fld1, tab1-fld2.
ENDSELECT.
A: Add a SY-SUBRC check.
B: Change the WHERE clause to use fld1 or fld2.
C: Remove the /1 from the WRITE statement.
D: Add INTO (tab1-fld1, tab1-fld2).
Ans : D
40. When modifying an internal table within LOOP AT itab. _ ENDLOOP. you must include an index number.
A: True
B: False
Ans : A
41. To allow the user to enter values on the screen for a list field, use:
A: OPEN LINE.
B: SET CURSOR FIELD.
C: WRITE fld AS INPUT FIELD.
D: FORMAT INPUT ON.
Ans : C
42. Before a function module may be tested, it must first be:
A: Linked
B: Authorized
C: Released
D: Active
Ans : D
43. To include a field on your screen that is not in the ABAP Dictionary, which include program should contain the data declaration for the field?
A: PBO module include program
B: TOP include program
C: PAI module include program
D: Subroutine include program
Ans : B
44. If a table contains many duplicate values for a field, minimize the number of records returned by using this SELECT statement addition.
A: MIN
B: ORDER BY
C: DISTINCT
D: DELETE
Ans : C
45. The system internal table used for dynamic screen modification is named:
A: ITAB
B: SCREEN
C: MODTAB
D: SMOD
Ans : B
46. Within the source code of a function module, errors are handled via the keyword:
A: EXCEPTION
B: RAISE
C: STOP
D: ABEND
Ans : A
47. Which system field contains the contents of a selected line?
A: SY-CUCOL
B: SY-LILLI
C: SY-CUROW
D: SY-LISEL
Ans : D
48. The following statement writes what type of data object?
WRITE: /1 'Total Amount:'.
A: Text literal
B: Text variable
C: In-code comment
D: Text integer
Ans : A
49. For the code below, second_field is of what data type?
DATA: first_field type P, second_field like first_field.
A: P
B: C
C: N
D: D
Ans : A
50. Which of the following describes the internal representation of a type D data object?
A: DDMMYYYY
B: YYYYDDMM
C: MMDDYYYY
D: YYYYMMDD
Ans : A
51. A BDC program is used for all of the following except:
A: Downloading data to a local file
B: Data interfaces between SAP and external systems
C: Initial data transfer
D: Entering a large amount of data
Ans : A
52. In regard to PERFORM, which of the following is NOT a true statement?
A: May be used within a subroutine.
B: Requires actual parameters.
C: Recursive calls are allowed in ABAP.
D: Can call a subroutine in another program.
Ans : B
53. What is the transaction code for the ABAP Editor?
A: SE11
B: SE38
C: SE36
D: SE16
Ans : B
54. In regard to HIDE, which of the following is NOT a true statement?
A: Saves the contents of variables in relation to a list line's row number.
B: The hidden variables must be output on a list line.
C: The HIDE area is retrieved when using the READ LINE statement.
D: The HIDE area is retrieved when an interactive event is triggered.
Ans : B
55. Database locks are sufficient in a multi-user environment.
A: True
B: False
Ans : B
56. The complete technical definition of a table field is determined by the field's:
A: Domain
B: Field name
C: Data type
D: Data element
Ans : A
57. In regard to LEAVE, which of the following is NOT a true statement?
A: May be used to return immediately to a calling program.
B: May be used to stop the current loop pass and get the next.
C: May be used to start a new transaction.
D: May be used to go to the next screen.
Ans : B
58. The following code indicates:
SELECT fld6 fld3 fld2 fld1 FROM tab1 INTO CORRESPONDING FIELDS OF TABLE itab
WHERE fld3 = pfld3.
A: The order of the fields in itab does not matter.
B: Fill the header line of itab, but not the body.
C: Table itab can only contain fields also in table tab1.
D: None of the above.
Ans : C
59. The ABAP statement below indicates that the program should continue with the next line of code if the internal table itab:
CHECK NOT itab[] IS INITIAL.
A: Contains no rows
B: Contains at least one row
C: Has a header line
D: Has an empty header line
Ans : B
60. What will be output by the following code?
DATA: BEGIN OF itab OCCURS 0, fval type i, END OF itab.
itab-fval = 1. APPEND itab.
itab-fval = 2. APPEND itab.
FREE itab.
WRITE: /1 itab-fval.
A: 2
B: 0
C: blank
D: 1
Ans : A
61. To allow the user to enter a range of values on a selection screen, use the ABAP keyword:
A: DATA.
B: RANGES.
C: PARAMETERS.
D: SELECT-OPTIONS.
Ans : D
62. If an internal table is declared without a header line, what else must you declare to work with the table's rows?
A: Another internal table with a header line.
B: A work area with the same structure as the internal table.
C: An internal table type using the TYPES statement.
D: A PARAMETER.
Ans : B
63. Assuming an internal table contains 2000 entries, how many entries will it have after the following line of code is executed?
DELETE itab FROM 1500 TO 1700.
A: This is a syntax error.
B: 1801
C: 1800
D: 1799
Ans : A
64. To remove lines from a database table, use ____.
A: UPDATE
B: MODIFY
C: ERASE
D: DELETE
Ans : D
65. All of the following may be performed using SET CURSOR except:
A: Move the cursor to a specific field on a list.
B: Move the cursor to a specific list line.
C: Move the cursor to a specific pushbutton, activating that function.
D: Move the cursor to a specific row and column on a list.
Ans : C
66. When is it optional to pass an actual parameter to a required formal parameter of a function module?
A: The actual parameter is type C.
B: The formal parameter contains a default value.
C: The formal parameter's \"Reference\" attribute is turned on.
D: It is never optional.
Ans : B
67. Coding two INITIALIZATION events will cause a syntax error.
A: True
B: False
Ans : B
68. Adding a COMMIT WORK statement between SELECT_ENDSELECT is a good method for improving performance.
A: True
B: False
Ans : B
69. To save information on a list line for use after the line is selected, use this keyword.
A: APPEND
B: EXPORT
C: WRITE
D: HIDE
Ans : D
70. To bypass automatic field input checks, include this in PAI.
A: AT EXIT-COMMAND
B: ON INPUT
C: ON REQUEST
D: LEAVE TO SCREEN 0.
Ans : A
71. Within a function module's source code, if the MESSAGE_RAISING statement is executed, all of the following system fields are filled automatically except:
A: SY-MSGTY
B: SY-MSGNO
C: SY-MSGV1
D: SY-MSGWA
Ans : D
72. The following code indicates:
REPORT ZLISTTST.
START-OF-SELECTION.
WRITE: text-001.
FORMAT HOTSPOT ON.
WRITE: text-002.
FORMAT HOTSPOT OFF.
AT LINE-SELECTION.
WRITE / text-003.
A: Text-002 may not be selected.
B: The value of text-002 is stored in a special memory area.
C: Text-002 may be clicked once to trigger the output of text-003.
D: None of the above.
Ans : C
73. The ____ type of ABAP Dictionary view consists of one or more transparent tables and may be accessed by an ABAP program using Open SQL.
A: Database view
B: Projection view
C: Help view
D: Entity view
Ans : A
74. A concrete field is associated with a field-symbol via ABAP keyword
A: MOVE
B: WRITE
C: ASSIGN
D: VALUE
Ans : C
75. The output for the following code will be:
report zabaprg.
DATA: char_field type C.
char_field = 'ABAP data'.
WRITE char_field.
A: ABAP data
B: A
C: Nothing, there is a syntax error
D: None of the above
Ans : B
76. Page footers are coded in the event:
A: TOP-OF-PAGE.
B: END-OF-SELECTION.
C: NEW-PAGE.
D: END-OF-PAGE.
Ans : D
77. The event AT SELECTION-SCREEN OUTPUT. occurs before the selection screen is displayed and is the best event for assigning default values to selection criteria.
A: True
B: False
Ans : B
78. The TABLES statement declares a data object.
A: True
B: False
Ans : A
79. Assuming tab1-fld7 is not a key field, how can you prevent reading all the table rows?
SELECT fld1 fld2 fld3 FROM tab1 INTO (fld4, fld5, fld6)
WHERE fld7 = pfld7.
WRITE: /1 fld4, fld5, fld6.
ENDSELECT.
A: Take fld7 out of the WHERE clause.
B: Create an index in the ABAP Dictionary for tab1-fld7.
C: Use INTO TABLE instead of just INTO.
D: Take the WRITE statement out of the SELECT_ENDSELECT.
Ans :
80. Which of the following is NOT a required attribute when creating an ABAP program?
A: Application
B: Title
C: Status
D: Type
Ans : A
81. When creating a transparent table in the ABAP Dictionary, which step automatically creates the table in the underlying database?
A: Adding technical settings to the table
B: Checking the table syntax
C: Saving the table
D: Activating the table
Ans : D
82. Within the ABAP program attributes, Type = 1 represents:
A: INCLUDE program
B: Online program
C: Module pool
D: Function group
E: Subroutine pool
Ans : B
83. If this code results in an error, the remedy is:
SELECT fld1 SUM( fld1 ) FROM tab1 INTO_
A: Remove the spaces from SUM( fld1 ).
B: Move SUM( fld1 ) before fld1.
C: Add GROUP BY f1.
D: Change to SUM( DISTINCT f1 ).
Ans : C
84. Which keyword adds rows to an internal table while accumulating numeric values?
A: INSERT
B: APPEND
C: COLLECT
D: GROUP
Ans : C
85. Assuming itab has a header line, what will be output by the following code?
READ TABLE itab INDEX 3 TRANSPORTING field1.
WRITE: /1 itab-field1, itab-field2.
A: The contents of the third row's itab-field1.
B: The contents of the third row's itab-field1 and itab-field2.
C: The contents of the third row's itab-field2.
D: Nothing.
Ans ; A
86. The following code indicates:
SELECTION-SCREEN BEGIN OF BLOCK B1.
PARAMETERS: myparam(10) type C,
Myparam2(10) type N,
SELECTION-SCREEN END OF BLOCK.
A: Draw a box around myparam and myparam2 on the selection screen.
B: Allow myparam and myparam2 to be ready for input during an error dialog.
C: Do not display myparam and myparam2 on the selection screen.
D: Display myparam and myparam2 only if both fields have default values.
Ans : A
87. Which statement will sort the data of an internal table with fields FRUIT, QTY, and PRICE so that it appears as follows?
FRUIT QTY PRICE
Apples 12 22.50
Apples 9 18.25
Oranges 15 17.35
Bananas 20 10.20
Bananas 15 6.89
Bananas 5 2.75
A: SORT itab DESCENDING BY QTY PRICE.
B: SORT itab BY PRICE FRUIT.
C: SORT itab.
D: SORT itab BY PRICE DESCENDING.
Ans : D
88. Which keyword adds a line anywhere within an internal table?
A: APPEND
B: MODIFY
C: ADD
D: INSERT
Ans : D
89. To read a single line of an internal table, use the following:
A: LOOP AT itab. _ ENDLOOP.
B: READ itab.
C: SELECT SINGLE * FROM itab.
D: READ TABLE itab.
Ans : D
90. Which Open SQL statement should not be used with cluster databases?
A: UPDATE
B: MODIFY
C: DELETE
D: INSERT
Ans :
91. To include a field on your screen that is not in the ABAP Dictionary, which include program should contain the data declaration for the field?
A: PBO module include program
B: TOP include program
C: PAI module include program
D: Subroutine include program
Ans : B
92. This flow logic statement is used to make multiple fields open for input after an error or warning message.
A: GROUP
B: FIELD-GROUP
C: CHAIN
D: LOOP AT SCREEN
Ans ; C
93. Given:
PERFORM subroutine USING var.
The var field is known as what type of parameter?
A: Formal
B: Actual
C: Static
D: Value
Ans : B

Problem with the FOR statement.....again!

Hi everyone,
Well I'm still trying to do a car slideshow using external
files and can't seem to see the end. The current movie is here:
http://www.virtuallglab.com/projects.html
I also attach the code. My problem is I had originally set up
an animation with 2 pictures sliding in with some text, and then
wait 4 seconds before sliding out, and then next pictures and text
would slide in and so on, using a setInterval.
The problem is the FOR loop seems to skip the setInterval and
the function "wait", so it just loops quickly and jumps to last
picture, so on the example above, it just slides the last picture
(i=9) and that's it!
Can you not include another function within a FOR statement.
Or is there a way to tell the FOR loop to wait until all motion is
finished?
Any help greatly appreciated
import mx.transitions.*;
import mx.transitions.easing.*;
for (i=0; i<10 ; i++) {
var picLeft = "pics/"+i+".jpg";
var picRight = "pics/"+i+"b.jpg";
var txtToLoad = "text/"+i+".txt";
this.createEmptyMovieClip("leftHolder",1);
leftHolder.loadMovie(picLeft,i,leftHolder.getNextHighestDepth());
leftHolder._x = -200;
leftHolder._y = 15;
var leftTween:Tween = new Tween(leftHolder, "_x",
Strong.easeOut, leftHolder._x, 10, 2, true);
this.createEmptyMovieClip("centerHolder",2);
centerHolder.loadMovie(picRight,i+"b",centerHolder.getNextHighestDepth());
centerHolder._x = 180;
centerHolder._y = 250;
var centerTween:Tween = new Tween(centerHolder, "_y",
Strong.easeOut, centerHolder._y, 15, 2, true);
text._x = 600;
myData = new LoadVars();
myData.onLoad = function(){
text.carText.text = this.content;
myData.load(txtToLoad);
var textTween:Tween = new Tween(text, "_x", Strong.easeOut,
text._x, 420, 2, true);
myInterval = setInterval(wait, 4000);
function wait() {
var leftTweenFinished:Tween = new Tween(leftHolder, "_x",
Strong.easeOut, leftHolder._x, -200, 1, true);
var centerTween:Tween = new Tween(centerHolder, "_y",
Strong.easeOut, centerHolder._y, 250, 1, true);
var textTween2:Tween = new Tween(text, "_x", Strong.easeOut,
text._x, 600, 1, true);
clearInterval(myInterval);
***************************************************************************************** ***

There is no way to tell a for loop to wait. That is not what
they do.
The entire for loop will execute (if possible, and it doesn't
enter some kind of continuous infinite loop) completely before each
time the frame is rendered.
If you want to spread things out over time you need to use
the setInterval -- but not inside a for loop! If you do that you
immediately set however many intervals as your loop has. In this
case you will also assign the ids for those intervals to the same
variable, effectively overwriting the value so you will never be
able to clear most of those intervals.
So you need to rethink you whole structure. Set up some kind
of counter and limit like this:
var slidesToShow:Number=10;
var curSlide:Number=0;
Then have your setInterval increment the curSlide each time
it is called and check to see if it has shown all of them. That is
where your "loop" comes in.
As for the other part of your question -- yes you actually
have two different issues going on -- again you cannot make a for
loop wait for anything. So no there is no way to pause it while you
wait for your tween to end. But you can be notified when a tween
ends.
Check out the documentation about the tween class in the help
files. There you will find the onMotionFinished event. So you can
set up one of those to start whatever needs to be started when the
tween has finished.
You should also use the MovieClipLoader class to load your
images, because you have no idea how long it will take to load
them. Using that class you get a nice event (onLoadInit) that tells
you when the asset is ready to be used.
Finally I'm thinking you might want to use setTimeout instead
of setInterval. It only goes once, while setInterval repeats
forever. So I would think your algorithm would be something like
this.
1. load external asset
2. when ready animate in and set onMotionFinished handler
3. when motion is finished start loading next asset and
setTimeout for 4 seconds.
4. when 4 seconds is up or the clip is loaded (which ever
takes longer) go to 2 and repeat.
If this is going to be run locally on a hard drive or CD you
won't have any problem with the length of time it takes to load the
external assets, but if it is over the web it will take time.

Using multiple variable names in a for statement?

I have searched, and I just can't seem to find how to do something, I do not have the code atm, but easy enough to explain...
I have a GUI that has 3 rows of 3 fields...
emp1Name, emp1Phone, emp1Fax
emp2Name, emp2Phone, emp2Fax
emp3Name, emp3Phone, emp3Fax
I also have a tabbed file that has the input for each of these fields, it looks something like...
Mike 602-111-1111 602-111-1112
Dave 602-222-2222 602-222-2223
Bethany 602-333-3333 602-333-3334
Here is my method...
    private void getFile() {
        myFile = new File("C:/javainput.txt");
        msgField.setText("Welcome!");
        try {
            BufferedReader br = new BufferedReader(new FileReader(myFile));
            String s;
            while ((s=br.readLine())!=null){
                String f[] = s.split("\t");
                emp1Name.setText(f[0]);
                emp1Phone.setText(f[1]);
                emp1Fax.setText(f[2]);
            br.close();
        } catch (IOException e) {
            msgField.setText("INPUT FILE NOT FOUND!");
    }My question is, how do I cycle through emp1, emp2 and emp3 in a for statement. I tried empName, but that obviously isn't correct.
Help, or point me to where I can read on this?
Thank you!
Edited by: 805764 on Oct 27, 2010 12:10 PM

Do one thing at a time. First, define your Employee class. Compile it, debug it. Test it. Make sure that you can create Employees, set their names, phone numbers, etc., and get them back.
Once that works, familiarize yourself with arrays, if necessary, completely separately from your Employee class.
Once you're comfortable with arrays and with defining a new class (i.e., Employee), write a tiny test program that just, say, creates an array of a certain size and populates it with Employees, and then iterates over it printing out each Employee's information to the console.
Once that works, set it aside. Now work on a GUI. Start by just displaying one or two hardcoded names and phone numbers. Once that works, add a bit more to it--say by getting that hardcoded information from inside Employee objects.
And so on.
Right now you're biting off too much at once. Keep working on one very small new step at a time, only move on to the next step once the previous one is solid, and do the steps independently of each other first, and then combine their respective results. It may sound like a lot of work, but I promise you, in the end, it's faster, easier, and far less frustrating to do it this way.
At any given step, if you get stuck, post a question here, providing an [url http://sscce.org]SSCCE that shows what you're trying to do, and clearly explain exactly what problems you're having.

Need the answers for following questions?

can anybody say the answers for following questions?
Data Dictionary :
1) Diff between Append Structure and Include Structure ?
2) What is Table Type ?
3) How the table entries are going to store, Is it Case sensitive, or in Capital Letter or in Small letter or as we give ?
4) How many indexes we can give for a table ?
Reports :
1) How can we enable the verticle scroll in a table control that comes in 2 nd screen of ME 21 T.code ?
2) What is BSEG table ?
3) How can you create Table Control ?
4) Diff between At Selection Screen on Field & At selection Screen Output ?
5) What are things we need to take care before using the Read Statement ?Example of Read Statement with Index ?
6) How many ways are there to select a Particular Data from the table ?
7) I want fetch the 10 th row and 5 th column from the list, How will you do it ?
BDC :
1) If we write Transaction Statement 2 times for a application What happens ?
2) If for Example , I had to upload 10 items for one header. The 5 items are uploaded, but the Sixth record is not uploaded ? How can you upload that data from 6 th Record ?
3) Tell me the Detail Steps in uploading the Data from Application Server ?
4) One Scenario, i am having 10 records in a file & when i am uploading the data everytime the 1st record is overlapping with already existing data, How you are going to handle this ?
5) What is meant by MASK in Upload function ?
6) what are the parameters you will pass withine BDC_INSERT ?
SAP- Script :
1) I want to display quantity & Price based on Particular Language and Country in SAP Script , How we can do that ? One particular statement is there for that, What is that ?
2) The Logo Upaloaded got Inverted , then How you are going to handle this situation ?
3) The logo uploaded using RSTXLDMC programe, Where it is going to store ?
4) can we see Tiff files in SE 78 T.code ? What are the file extension of Logo we can upload to SAP
5) How to check the changes made in the standard layout set , other than using Utilities--- -> Print preveiw ?
User Exit :
1) Suppose i have used a fuction Module Exit, But is in Inactive status , What is The error it is going to give during runtime ?
2) Suppose i want to delete the Function Module exit from one project and i want to use it for another project ? what are steps you follow to delete it ?
BADI
1) Is that all the Predefined BADI's present in SAP are reusable ?

Data Dictionary :
1) Diff between Append Structure and Include Structure ?
Append Structure - This structure can be used only one time to append. Append structures are useful for standard tables.
Include Structure - This structure can be used in multiple tables. Include structures are useful for our own custom tables.
2) What is Table Type ?
A table type is a type that describes the structure and functions of an internal table in the ABAP program. In simple words table table will act as an internal table without header line.
3) How the table entries are going to store, Is it Case sensitive, or in Capital Letter or in Small letter or as we give ?
Yes it is case sensitive.
Use translate statement to convert Upper case or Lower case.
4) How many indexes we can give for a table ?
1 primary index automatically created and we can create up to 15 secondary indexes.
Reports :
1) How can we enable the verticle scroll in a table control that comes in 2 nd screen of ME 21 T.code ?
set <tablecontrol>-lines = 0.this code you have to put in one suitable userexit.then it applies to standard tcode ME21N.
2) What is BSEG table ?
BSEG table is a FI table for Accounting Document details.
3) How can you create Table Control ?
controls : tabcont type tableview using screen '3000'.
PROCESS AFTER INPUT
MODULE mod AT EXIT-COMMAND.
LOOP AT itab_table or LOOP "depending on whether we are using AT int_table
MODULE modify_int_table.
ENDLOOP.
MODULE user_command.
4) Diff between At Selection Screen on Field & At selection Screen Output ?
AT-SELECTION SCREEN ON FIELD
is to validate a particular selection screen field.
if any error comes it will open only this field and other fields will be disabled.
AT-SELECTION SCREEN OUTPUT
is used to do dynamic screen modifications on the screen.
5) What are things we need to take care before using the Read Statement ?Example of Read Statement with Index ?
do sort before read data from table.
6) How many ways are there to select a Particular Data from the table ?
using views or directly u can select data.
7) I want fetch the 10 th row and 5 th column from the list, How will you do it ?
sorry...
BDC :
1) If we write Transaction Statement 2 times for a application What happens ?
i think u got message like already that transaction was called like this..
2) If for Example , I had to upload 10 items for one header. The 5 items are uploaded, but the Sixth record is not uploaded ? How can you upload that data from 6 th Record ?
within the loop u have to write the code for the 6th record and then process again.
3) Tell me the Detail Steps in uploading the Data from Application Server ?
use DATASETS for uploading data from application server.
4) One Scenario, i am having 10 records in a file & when i am uploading the data everytime the 1st record is overlapping with already existing data, How you are going to handle this ?
write CLEAR statement before endloop.
5) What is meant by MASK in Upload function ?
sorry...
6) what are the parameters you will pass withine BDC_INSERT ?
TCODE-import parameter
DYNPROTAB-tables parameter
SAP- Script :
1) I want to display quantity & Price based on Particular Language and Country in SAP Script , How we can do that ?
One particular statement is there for that, What is that ?
Actually u will get quantity and price based on language using SE63 transaction.it is used for language conversion.
2) The Logo Upaloaded got Inverted , then How you are going to handle this situation ?
just check the printer settings again.
3) The logo uploaded using RSTXLDMC programe, Where it is going to store ?
STXBITMAPS is the table which stores all the logos.
4) can we see Tiff files in SE 78 T.code ? What are the file extension of Logo we can upload to SAP
No we cannot upload .tiff files using SE78 ..here u can upload only bmp and jpg logos...if u want to upload .tiff files go to standard program RSTXLDMC..by using this you can do.
5) How to check the changes made in the standard layout set , other than using Utilities--- -> Print preveiw ?
by executing the formprogram.
User Exit :
1) Suppose i have used a fuction Module Exit, But is in Inactive status , What is The error it is going to give during runtime ?
u didn't get any error message but that functionality cannot applied to it..thats it.
2) Suppose i want to delete the Function Module exit from one project and i want to use it for another project ? what are steps you follow to delete it ?
first go to that perticular project..within this u have one enhancement..just click on that one...and go to that function module which u are assigned..remove the code and activate..delete enhancement and activate that project..now u can use that enhancement in other projects.
BADI
1) Is that all the Predefined BADI's present in SAP are reusable ?
here reusable means u can do multiple implementations for all BADI's.
Rewards if it helpful.
Dara.

ORA-01460: unimplemented or unreasonable error & OPEN-FOR statement ...

Hi,
I have a procedure that opens a cursor which returns a result set based on a dynamic SELECT statement. The IN clause
in most cases needs to handle more than 1000 expressions. So to avoid the ORA-01785 error, I use a function to
convert the comma separated list of ids (which are unknown) into a collection which can then be used in the sub query
to process each expression or id. I assumed that the maximum string length I could use for these list of ids was
32767, i.e. VARCHAR2. But f I attempt to open the cursor with a list of ids where the string length is greater than 4000 bytes , the cursor is invalid
and it seems to throw the following Oracle error:
ORA-01460: unimplemented or unreasonable conversion ...
Note that anything less than 4000 bytes is fine. I have attached some of the code below and would appreciate if anyone
could tell me what im doing wrong! For example, can a varchar2 variable greater than 4000 bytes not be used when
executing dynamic SQL in the context of the OPEN-FOR statement?
-- Create type to hold collection of identifiers.
CREATE OR REPLACE TYPE IDList IS TABLE OF NUMBER;
-- Function which converts a string of comma separated list of identifiers
-- into a collection.
CREATE OR REPLACE FUNCTION fnConvertIDListToCollection(
     varList IN VARCHAR2,
     varDelimiter IN VARCHAR2 DEFAULT ',')
RETURN IDList
IS
     varString long := varList || varDelimiter;
     varPos pls_integer;
     varData IDList := IDList();
BEGIN
     LOOP
          varPos := instr(varString, varDelimiter);
          EXIT WHEN (nvl(varPos, 0) = 0);
          varData.extend;
          varData(varData.count) := trim(substr(varString, 1, varPos - 1));
          varString := substr(varString, varPos + 1);
     END LOOP;
     RETURN (varData);
END;
CREATE OR REPLACE PROCEDURE MyTestProc
myCursor OUT SYS_REFCURSOR
AS
varListOfIds VARCHAR2(32767);
BEGIN
     -- Hard coding this for now but this will be an incoming parameter containing a list
     -- of unknown ids, separated with commas.
     varListOfIds := '1,2 .. , 5000';
     OPEN myCursor FOR
     'SELECT     DISTINCT val1, val2, val3
     FROM TABLEA
     WHERE     val1 IN (select * from table(cast(fnConvertIDListToCollection(:ListOfIds) as IDList)))' USING varListOfIds;
END;
/

APC,
Many thanks for the suggestion and yes I could possibly implement an alternative solution, certainly for some cases but I need to investigate further for others. I'm migrating some SQL Server logic over to Oracle and that was simply the approach taken on that platform.
Could I trouble you with one further question as a newbie to all of this. I hinted in my last response that I was somewhat confused over the limits with the use of varchar2 variables in PL/SQL. If I were building up a piece of dynamic SQL (e.g. SELECT statement including a WHERE clause) using an incoming VARCHAR2 parameter for the WHERE clause, can this parameter contain more than 4000 bytes if necessary. I assumed it could be as big as 32767 bytes but an earlier response suggested a maximum of 4000 bytes. Really sorry for probably a fairly basic Oracle question but it would be very appreciated if you could explain this to me.
Again, many thanks.

Method calls in switch and for statements

I have 2 questions concerning method calls in switch and for statements. Consider these two chunks of code:
1)
     switch (foo.getIntegerValue()){
          case 1:
          case 2:
     }My question is, is getIntegerValue() being called for every case statement (since it has to compare with each case) or is the method called only once?
2)
for (Foo bla : xyz.compileFoos()) {
}Is compileFoos called once or on every iteration?
I assume it gets called only once but I would like to be sure. The reason I ask is of course to avoid multiple method calls.
any help is appreciated

sdb2 wrote:
I have 2 questions concerning method calls in switch and for statements. Consider these two chunks of code:
1)
     switch (foo.getIntegerValue()){
          case 1:
          case 2:
     }My question is, is getIntegerValue() being called for every case statement (since it has to compare with each case) or is the method called only once?
     Once, and the value returned compared to each "case" in turn.
2)
for (Foo bla : xyz.compileFoos()) {
}Is compileFoos called once or on every iteration?
I assume it gets called only once but I would like to be sure. The reason I ask is of course to avoid multiple method calls.
any help is appreciatedAlso once, and the returned list/set/array is iterated over.

XRaid Setup for Facility-Questions

We are a small production facility and I'm moving towards shared storage. Here is the system I was thinking of getting, so if anyone wants to give any advice, I'd be happy to accept and very appreciative.
-We currently have 3 rooms: 2 G5's and 1 Intel 3.0 Quad all running Final Cut Pro regularly editing DVCPro HD and SD Uncompressed and DV.
I'm going to lease:
-XRaid fully populated with either 500 or 750gig drives (advice?)
-3 Dual Channel 2Gig Fibre cards
-Qlogic SANbox Express 1403 Fibre Switch
-Cables-Need 2 runs of over 25 feet to rooms
-MetaSAN software
-Placement: Can the XRaid live in our edit suite in our rack? Is it too loud to have in a suite? (We don't have a dedicated machine room.)
-Cable? Fiber optic or copper? Our rooms are all next to each other, but obviously, just to get cable up the wall, over the ceiling, etc, we will definitely be more than the 3 meters limit of copper. Am I correct on this that we have to go optical with these transceiver units??
-Size:750 versus 500's? Anyone have any negative experiences with the 750's? Greater chance of problems with them? Run much hotter? It seems way cost effective to go 750's for only an additional $1400 to get an extra several TB's...
-RAID: Best setup? I've only started researching, but it sounds like I should Raid 0 both sides individually and then stripe them Raid 50 together. How much drive space will I lose doing it this way for safety? Is this correct?
Thanks a lot for any help. This stuff is a little out of my techy comfort zone...
Kevin

Your setup sounds fine. As for specific questions:
>-Placement: Can the XRaid live in our edit suite in our rack? Is it too loud to have in a suite? (We don't have a dedicated machine room.)
To be honest, I'm not certain about the noise since all my RAIDs are surrounded by XServes, CRAC units/air handers, etc., etc. Anecdotal evidence says they're noisy, If it's too noisy for you, something like the XRack Pro might be an idea solution.
>-Cable? Fiber optic or copper? Our rooms are all next to each other, but obviously, just to get cable up the wall, over the ceiling, etc, we will definitely be more than the 3 meters limit of copper. Am I correct on this that we have to go optical with these transceiver units??
Copper cables can run up to 50 meters, so the choice is yours.
I've purchased long copper cables from CS Electronics before and have been very happy with them. They'll even make custom length if you want/need that.
>Size:750 versus 500's?
750's. No question. As you note, the price difference is small compared to what you get.
>-RAID: Best setup? I've only started researching, but it sounds like I should Raid 0 both sides individually and then stripe them Raid 50 together. How much drive space will I lose doing it this way for safety? Is this correct?
Ordinarily I'd say RAID 50, as you hint (although this is a striped (RAID 0) array of RAID 5 volumes, I'm guessing your 'RAID 0' comment was a typo.
However, if you're using a SAN product you should check with the vendors. Presumably the SAN is going to virtualize the storage and therefore it might not matter how the RAID is configured. In most cases I'd recommend RAID 5 on the XServe RAID itself, so it's the RAID 0 element that's most questionable.
You might also need to take performance into account. Ordinarily RAID 50 gives best performance, but only for a single host. If you have multiple hosts contending for disk access you might find that separate volumes, with individual servers weighted towards one array or another gives you a better solution since each machine is unaffected (or, at least, less affected) by what the other is doing.

Using for statements.

Hello again,
I am just learning how to use the for statements and the while statements and am having some problems.
I need to display the squares of numbers from 1-10. Here is what I have and am getting an error for an illegal expression. My question is, How do I set up the code to recognize the squaring?
public class squareFor
     public static void main(String[] args)
          int total = 0;
          for(int number = 1; number *=1)
          total *= number;
          System.out.printf("Sum is %d\n", total);
     }

Well I tried a little bit more and this is what I got. Why am I not able to get them to square?
public class squareFor
     public static void main(String[] args)
          int total = 0;
          for(int number = 1;number <= 10; number ++)
               int x= 1*1;
               int w= 2*2;
               int y= 3*3;
               int z= 4*4;
               int a= 5*5;
               int b= 6*6;
               int c= 7*7;
               int d= 8*8;
               int e= 9*9;
               int f= 10*10;
          total *= number;
          System.out.printf("Sum is %d\n", total);
}

Folder with happy faces & a question marks

My iBook G4 goes from chime to a black page and then to a grey screen with a folder with an alternating happy face & a question mark??? I have reset P-ram. I have run TechTool Pro and fixed all permissions and volumes and I have run Disk Utility and start-up disk off my 10.4 install disk. In all cases, the hard drive was recognized by Disk Utility and TechTool Pro 5. But still no proper startup or restart. I have also " reset nv-ram" and "reset all" from command line.
I have also reloaded 10.4. No change.
Any suggestion on what to try next???????
Thanks

Yes I repaired the disk as well (numerous times). I have also tried an Archive and Install. I have checked the drive for disk corruption with TechTool Pro 5. I have connected via Target mode and see the drive and ran all tests over again. I have even reinstalled 10.4.6 (install disk) with erase of the disk. Nothing seems to work. All diagnostic, repair and connections see the hard drive, but no proper start up.
Is there a possibility that the bios firmware is corrupted or a hardware problem that still allows you to see the drive??? Please note that I had only 4 gig of disk space left on 60 Gig driven (less than 10%)....Yes I know that is bad but I was out of town at the time that it went south.

Trying to purchase on iTunes for the first time on new Mac, asking for verifying questions-saying answers are incorrect. Reset password,still won't allow purchase without answering questions. Any advice?

Trying to purchase on itunes, using new Mac...asking for security questions but won't accept answers. reset password and iTunes still asks for security questions. Any advice?

After resetting your questions you've tried logging out (tap on your id in Settings > iTunes & App Store) and back into your account on your iPad to see if they then tie up ?
If they don't, and resetting them yourself doesn't make any difference, then you could try contacting Support and see if they can help with what's going on.
Normally when needing to contact support to get the questions reset you need to contact Support in your country : http://support.apple.com/kb/HT5699
You could try the same contact method for your problem - or you could try contacting iTunes Support via this page, but as it's related to security questions they might just point you to the above : http://www.apple.com/support/itunes/contact/ , click on Contact iTunes Store Support on the right-hand side of the page
For the $9.99 purchase and your $10 credit, if you are in the US then you need to add on your state's sales tax to an item's listed price

Happy For Statement Question

Similar Messages

Maybe you are looking for