Happy with SBSA300 2.1 Speakers
I know this may be an old speaker and there are better Creative 2.1 Speakers.
But, I was on a tight budget and was really eager to instantly buy new PC speakers so I chose this SBSA300 as they say it is a combination of affordability and quality.
Been using it for 3 or 4 weeks now and I am very much happy with it. Creative does seem to give much importance on its quality.
Thanks.
http://storeyourpicture.com/images/s...lectronics.jpg
pmoney,
If you need a RMA, you will need to contact Customer Support either via email or phone. Also, it may be a fault with the sub and not just the cable alone, anyway contact Customer Support and they will be able to assist further.
Jason
Similar Messages
-
VERY BAD SOUND: MacBook Pro (unibody) with external JBL Creature speakers
Recently I've bought myself a brand new Mac Book Pro. I'm very happy with my new laptop, but I can't say that about the audio-output quality my new MacBook Pro delivers in combination with my existing external JBL Creature speaker set. In the recent past this speaker set was attached to my old iMac 17" flat, which delivered supreme music quality, but now in combination with my by far more superiour new MacBook Pro, the music sounds very disturbed with a background noise and it seems that the speakers do get to much power/signal - but still the music sounds very far away and the more I pump the volume the worse gets the music output (i.e. more noise is coming out of the speaker) and the right channel seems to have less power (or output). Now I've disconnected my JBL Creature speakers set as from time to time also static ticks are loudly to be heard when just connected whilst I don't do anything with my MacBook Pro.
Can anyone tell me whether this is a problem of the audio-design of the new MacBook Pro (aluminium unibody) and if so is there a solution for to by-pass or overcome this very annoying problem.
Many thanks in advance for your support!It is true that the audio quality is a total crap, the audio card seems to be "Realtek" and yes it is ****, I am really ****** cause it is not a cheap computer and I have always used mac too and I am really disapointed. I just can't believe that Apple has passed by the audio quality that is so carefully observed in the ipod products. I have been blessed (no, it is really a curse) with a very sensitive unhuman high frequency hearing and my ears really hurt when I use the earphones with the Macbook notPro and I use it at low volume. You can even hear when the sound system goes off when no sound is played for a little while and the when a sound is played goes on and the noise begins. Also you can hear strange whistles and sissings wich are not continuous but the main amp noise is there. This kind of noise is produced by bad quality, low eficiency amplifiers or other factors I do not know. But I have tested several realtek integrated cards and the all are pure crap or less than crap.
Ok bye, bye. -
I have a 3 year old MacBook Pro with MAC OSX 10.6.8, iPhoto ’09 version 8.1.2 and have downloaded two software programs: one is Aperture 3.2 and the other is Photoshop Elements 9 (which I got from a friend who didn’t need it).
I am totally happy with the way iPhoto organizes my photos and how I can work with iMovie to create slide shows with music from iTunes, etc.
I have been shooting mostly high resolution jpegs and I continue to learn more and more about photography, post processing etc. I realize that the small adjustments I can make in iPhoto are good, and are adequate most of the time. However, a have started to experiment with shooting RAW images and would like to go the next step, ie. post processing.I am totally technically challenged and need SIMPLE, INTUITIVE programs and am certainly NOT anywhere ready for Photoshop CS whatever!
After having these programs sit on my computer, I decided to try to see if I could figure them out. When I opened Aperture, this is what first comes up.
“Welcome to Aperture 3.2
Your library needs to be upgraded to work with this version of Aperture. Once upgraded, you will not be able to use this library with previous versions of Aperture.
Upgrading a library from previous versions of Aperture 3 generally takes a few minutes or less, though larger libraries will take longer. After that, Aperture 3.2 will upgrade your library's thumbnails, but you can use the application during that time.
Tip: To open a different library, quit Aperture and hold the Option key down while starting Aperture
Current Library Location:
Jadzia (home) -----Pictures------Aperture Library
QUIT UPGRADE”
I have heard horror stories about moving your entire library to Aperture, ending up with 2 libraries, etc. etc. hence my previous reluctance in attempting Aperture. In addition, many of my photography friends are saying: Go with Lightroom 3.....you’ll love it!
So here is my dilemma. I don’t want to mess around with my iPhoto library. All I want to be able to do, is to isolate a few photos, export them to Aperture, Elements, and work on them there, then bring them back into iPhoto.
Can I do this? Should I forget about Aperture and Elements and look at purchasing yet another program like Lightroom?Export those few photos via the File ➙ Export ➙ File Export menu option with Kind = Original to the Desktop. Then import them into the Aperture library. That would keep one copy in your iPhoto library and another in your Aperture library to edit, etc.
You can use Photoshop Elements 9 from within iPhoto as your editor of choice. However, if you edit a raw file in iPhoto with PSE9 the resulting edited version must be saved outside the iPhoto Library and imported back in as a new file. For editing jpegs just do a Save (not a Save As) and it all will be kept within iPhoto.
Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements the Saving File preferences should be configured as shown:
I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Note: to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
OT -
I am happy with the CC format- it works for me
There are a million and one negative threads about the new CC stuff. But I wanted to start a thread with a different tone.
I realize that the majority of those in the forum probably see the CC change as a negative one. And in complete honesty, I understand their reasons, and even AGREE with them. The lack of an exit strategy from the cloud is a problem, though Adobe does say they are working on a solution. The place I work has no plans on upgrading to CC, though it's only maybe 10 users that are affected.
But on a personal level, the CC option is a huge blessing to me. Though I do work in an environment where software is provided for me(we're currently on CS 5.5), with a new baby on the way and daycare costs taking up half my salary, I am ramping up my freelance business again as sometime in the next year, I'll probably become a stay at home dad.
I've never been able to afford the Adobe suites outright. My wife and I do have a certain amount of personal money set aside each month to spend, but it's very difficult to come up with enough to purchase the suites.
So when I saw that I could get everything for $30 a month for the first year(I do have a CS3 or above product registered), I was very happy. As somebody trying to get my freelance business running full speed again, this is a perfect opportunity for me to get into the Adobe software outside of my place of employment. And if things go well, the $50 a month after that won't be a problem. If I'm not making enough to afford $50 a month, then I'm probably not running the best business and probably won't be needing the tools for long.
So this arrangement works perfectly for me. I do web design AND video/motion graphics editing, so having everything at my disposal is ideal.
So in the sea of negativity that exists here in the forums(and not for bad reasons), I just wanted to say that I'm happy with this. Adobe have provided a way for me, who doesn't have a ton of money flowing in, to get into the great tools I already know and love. And in my view, at least temporarily, if I'm finding success, the continued fee is more than justifiable. So I want to say thank you to Adobe for providing this opportunity.
Now, if I can please ask that this thread doesn't turn into yet another one of the already extensive number of threads bashing CC, and hopefully others who are thankful for this plan can chime in. Maybe nobody will, but I'm sure there are others out there. I just don't want this to degenerate into the same thing you can read in every other topic. Yes, I know that when I want to get off "the cloud", there are things to consider. I'm aware, and I accept that. Let's leave it at that.
Thanks!
BrentBiggles Lamb wrote:
Chill out guys, getting personal will never ever change another persons view, right or wrong, they are entitled to them .
The pros and cons of to CC or not to CC have been done to death
Its a fact the CC model will work for some, especially newbies and small businesses.
The risks associated with the CC model have been well documented.
For long term users of CS perpetuals its generally a large hike up in cost compared to the upgrade system.
Then there are the....... Adobe can rot it hell...... group who will never subscribe
To each their own, you do the math to suit your cashflow whatever that is and then make an informed decision
To those on the CC model, I'd like to offer some practical advice.........do not allow automatic updates.........make regular backups............develop an exit strategy of alternatives for when you can no longer afford the subscription costs............never ever assume that the Adobe update is bug free
Enjoy your cloud
Col
Thank you for that post, and the advice. I just happen to be one of those who it does work for. I've been around long enough to know that CC isn't going to work for everyone(the large publishing/radio/web company I work for isn't upgrading to CC because of the costs involved). But it does for me as I potentially venture out into the full-time freelancing world and away from the more structured big office environment. I can't make decisions based on what is best for anyone else, or what will hurt or help Adobe. Just what affects me, and that's all.
Brent -
Not happy with moving around keys on the timeline
I just changed from Final Cut to Premiere CS5.0 and I really like it. Working on a Macbook Pro i5 2.3GHZ, Mac OSX 10.7 But I am not happy with moving around on the timeline. I was used to using the up and down arrows to move to next video edit point, marker point or audio edit point. I tried everything to change it, highlighted the track etc. It only works together with the FN key, which is a bit uncomfortable. And then it definetely is not going to any audio edit points (very annoying!!!) and marker points (have to use Q and W keys). It makes me doubting if continuing with Premiere or not. Its such an esencial and easy to use tool while editing in a normal fast editing rythm. When I change it in the customize keyboard menu, into a Custom keyboard or FCP keyboard, it would ignore my changes on the arrowkeys, although it recognizes any other changes I do. Is it so complicate to change this issue in Premiere to how it is set in FCP? Its such an obvious tool, using the arow keys to move around, cannot beleive that we have to live with such a limitation. Please!!!
Its such an obvious tool, using the arow keys to move around, cannot beleive that we have to live with such a limitation. Please!!!
You dont have to live with that at all if you are fixed only to what you have previously done.
It makes me doubting if continuing with Premiere or not.
There ya go! -
I have an older version of Adobe Digital Editions (around 3 years old) and was very happy with it.
Then I had problems with my Kobo Reader and asked a friend who works in IT to assist. She could not fix the Kobo but she messed up my Addobe. She downloaded version three and I have an account and a password - was not able to transfer my books from my reader to version three (and I don't like the lay-out - I would prefer to stay with the old version as I also loose all my download date info..)
But all the books I have bought over the last three years are in the old Adobe Digital and I cannot access them any more. When I use it I get the message "that the document is licensed to a different account. I can't even open the books on my computer.
When I go to my Kobo library, I cannot also not open my books and get the message "this doc is protected by adobe digital rights management and is not currently authorized for use with your adobe. please sign in with your authorized adobe id and try again"
I believe the problem is that I do not seem to have a digital id for my old adobe or that the Kobo is not in sync with it anymore.
can you please help me - going on vacation in three days and cannot go without books.Please authorize ADE 3 with same credentials that you used with older version of ADE
-
I just got iphone 5c and i am not happy with it. It uses to much data and i don't even know how. I can't get the ringtones i want for my contacts.I got it on my free upgrade but i want to take it back and get something else but where i got it they say i can't because i don't have the earbuds and i have serches or them. now i am suck with a phone i don't like at all until my next upgrade. this is very dishearten
1. If you are this unhappy with that phone, and the lost earbuds is the only thing stopping you from taking it back, why do not just buy some earbuds. That way you can get rid of that phone. It all depend upon how much you want to get rid of that phone.
2. Yet if you are stuck with that iPhone, here is something might help you to control the data usage. By design, iPhones do turn off WiFi when they go dormant. So if a download is in progress and so forth when the phone goes dormant, it will switch to use cellular data, if this setting is left on. Therefore, from multi-sources I have learned that if you keep your iPhone connected to a power source, then it will stay connected to the available WiFi. -
I have had a verizon cell phone for 13 years and have gotten your cable/internet/phone when i moved out on my own because i had been so happy with the experience i had with the cell phone service. i ordered my new iPhone 6 on October 6th along with my husband. i was told by the sales associate at the vierzon store where i placed the order that it would ship a week before halloween. instead of a shipping confirmation, i received an email a week before halloween letting me know that my order had been placed on 10/24/14. i thought this was weird, but figured i could weight another week or two, no big deal. my husband got his phone in the mail yesterday. still no sign of mine. then this morning i got an email letting me know that my order was cancelled and if id like to place another order for a phone, then i can go back to the store and do so. why would i want to go through another month of this??? verzon lost my order. i never canceled it and i am beyond annoyed. i am looking to switch my entire house to another provider. this is ridiculous.
i did not get any reasons or explanations. the email just stated that my order was canceled and that it won't be posted to my credit card (i have more than enough to cover the cost, so that is not the issue). also my husbands phone was paid for from the same card moments before me. my balance is always paid automatically and on time. so that couldn't be the reason either. that's what so frustrating is because they didn't explain what happened. this is what the email read exactly:
"This email is to confirm that your order has been cancelled; you have not been billed for this merchandise.
If you would like to place a new order, you may do so by visiting your local retail store or going online to www.verizonwireless.com.
Business customers should refer back to their local Verizon Wireless Sales Representative if you have any questions or would like to place a new order.
Thank you, and we look forward to your business in the future.
Verizon Wireless"
it almost feels like its saying that i canceled it and that this was to confirm that i did. but i didn't cancel anything. -
I am so not happy with the new changes especially when it come to the ability to change background colours, fonts and font sizes/ colours... Does Apple really think that their only audience is the young cool crowd or people who do not have a visual impairment. Think before you make changes to your software and programs. You WILL lose more people to androids if you continue this way.
At least give users the ability to make apps like notes their owned by allowing them to pick the style, theme, background and colour, font size and colour.
A very ****** off Apple user who is now looking at Androids.Hi Tricia,
I'm sorry but I don't see an ideal way to do this. Is it the yellow label text, e.g: "New" against the white background which is causing the difficulty?
The only way I've found of getting the colors to change in Notes is via Settings>General>Accessibility>Invert Colors but then it looks like something has barfed all over your screen.
I'd be very, very surprised if Apple do not fix this, firstly because I believe "Accessibility" is a legal matter and secondly because they will not want to cause difficulty for their customers. We have to remember that this is a major, major overhaul of iOS, it has essentially been taken back to the drawing board and done from scratch again, it may take a little time, but I'm sure they will fix these issues.
Regards,
Steve -
I have posted "submit" twice and keep getting requests to submit again. Now being asked to write a summary! Here we go. I have iPhoto 08 and am happy with it. Don't want to upgrade. But suddenly when I click on an event, instead of getting all the photos, I just get a large version of one photo and cannot move on to the others. The right arrow will not move it and the photo just jumps around.
Note the slider bottom right of the iPhoto Window. Drag it left.
-
Re: not happy with layout of components
I have written the front end of a banking application.
The problem is I am not happy with how the components are positioned.
Any suggestion?
I am using gridlayout(7,2)
6 rows are made up of mainly labels and textfield.
One row is a panel, which has other components.
The problem is there is a large gap between the labels and the next component.
Here is the code:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class BankUI extends JFrame {
JLabel jlabel1, jlabel2, jlabel3, jlabel4, jlabel5, jlabel6,
jlabel7, jlabel8, jlabel9, jlabel10;
JCheckBox jcheckbox1, jcheckbox2;
JTextField jtextfield1, jtextfield2, jtextfield3, jtextfield4;
private JComboBox jcombobox1, jcombobox2, jcombobox3;
private String days[] = { "1","2","3","4","5","6","7","8","9",
"10","11","12","13","14","15","16","17",
"18","19","20","21","22","23","24",
"25","26","27","28","29","30","31"};
private String month[] = { "January", "February", "March", "April",
"May", "June", "July", "August", "September",
"October", "November", "December"};
private String year[] = { "1970", "1971","1972","1973","1974","1975","1976",
"1977","1978","1979",
"1980", "1981","1982","1983","1984","1985","1986",
"1987","1988","1989",
"1990", "1991","1992","1993","1994","1995","1996",
"1997","1998","1999",
"2000", "2001", "2002", "2003"};
private JPanel jpanel;
private Container c;
private GridLayout gridlayout;
public BankUI()
super( "Scruple Bank");
gridlayout = new GridLayout(7,2);
c = getContentPane();
c.setLayout(gridlayout);
jlabel1 = new JLabel("Surname:");
jtextfield1 = new JTextField(20);
c.add(jlabel1);
c.add(jtextfield1);
jlabel2 = new JLabel("First name:");
jtextfield2 = new JTextField(20);
c.add(jlabel2);
c.add(jtextfield2);
jlabel3 = new JLabel("Address:");
jtextfield3 = new JTextField(20);
c.add(jlabel3);
c.add(jtextfield3);
jlabel4 = new JLabel();
jtextfield4 = new JTextField(20);
c.add(jlabel4);
c.add(jtextfield4);
jlabel5 = new JLabel("Date of birth:");
c.add(jlabel5);
jpanel = new JPanel();
c.add(jpanel);
jlabel6 = new JLabel("Day");
jcombobox1 = new JComboBox(days);
jcombobox1.setMaximumRowCount(3);
jpanel.add(jlabel6);
jpanel.add(jcombobox1);
jlabel7 = new JLabel("Month");
jcombobox2 = new JComboBox(month);
jcombobox2.setMaximumRowCount(3);
jpanel.add(jlabel7);
jpanel.add(jcombobox2);
jlabel8 = new JLabel("Month");
jcombobox3 = new JComboBox(year);
jcombobox3.setMaximumRowCount(3);
jpanel.add(jlabel8);
jpanel.add(jcombobox3);
jlabel9 = new JLabel();
jcheckbox1 = new JCheckBox("Payment Protection");
c.add(jlabel9);
c.add(jcheckbox1);
jlabel10 = new JLabel();
jcheckbox2 = new JCheckBox("Card Protection");
c.add(jlabel10);
c.add(jcheckbox2);
setSize(750,300);
show();
public static void main(String args[])
BankUI app = new BankUI();
app.addWindowListener(
new WindowAdapter() {
public void windowClosing(WindowEvent e)
System.exit(0);I have an open source layout called AttachLayout that a member of this forum gave to me awhile back. It greatly assisted me and you can check it out here:
http://www.compaq.com/java/download/attachlayout/
It's easy and intuitive.
Let me know if you need more assistance or have difficulty getting the classes. -
You've moved stuff around so the tabs are at the top instead of my tool bar. I no longer have the means then to copy and paste, print, etc. when I pull up information I might want to keep from a web page. When I downloaded Version 4 a message came across from Firefox that the newer version is not compatible with the Yahoo toolbar. How then do I operate these functions? I'm not a techie, and was happy with my old Firefox. Not a happy camper now. Can you help???
iPHP
Wow! You know, I tried a variation of that, which was a complete guess, and of course it was absolutely wrong.
I had no idea you could stack DATE_FORMAT one after the other! I researched this for a LONG time and nothing came up like what you suggested, so thank you for this! I hope that this thread helps others who are or will soon be in my shoes. This forum is the BEST!!!
And of course, it works like a charm. Thank you.
Many incredibly sincere thanks,
wordman -
. I have Adobe Actobat 7.0 Standard for quite a while, and I'm happy with it. I use it for mainly filings at the federal court. They require PDF. I use two computers in two different states for work. I realize my Adobe 7.1 is a few years old, but sometimes I have difficulty using it with the other days downloading a boarding pass, and e filing at the USDC. . There's a problem with Adobe Flash, media, etc. and other Adobe programs, (which I use for downloading boarding passes for airlines, etc.) so basically I have to delete these other Adobe programs, besides the Adobe Acrobat 7.0 Standard if I want to 7.0 Standard to work. I periodically download the updates, but there's still a problem. My question is: Can or should I purchase another program to update the present Adobe Acrobat 7.0 standard, or just buy a new program such as the Adobe 11? Am I mistakenly doing something wrong, such as when I download? I'm an old valued customer so I don't want to spend a lot of money since I am replacing my Dell XP for a new computer now, and my other computer is a Dell Vista.
I'd appreciate your valued advice.If you are getting a new computer (for a PC it would have Win 7 or 8), then you will need to purchase XI if you wish to continue using Acrobat. Acrobat 7 is not compatible with these systems (and probably the same for MAC systems), though sometimes workarounds are possible, though not easy to use. I guess the answer is to buy the new version. Try http://www.adobe.com/products/catalog/software._sl_id-contentfilter_sl_catalog_sl_software _sl_mostpopular.html, click on the Buy for Acrobat, and then select the version you want.
-
i have recently had my hard drive replaced due to a fault whilst in Germany working. Happy with the replacement, however when i go to log on as a user that screen is in German? Any idea how to change the language?
Greetings Lex,
Kind of you to comment ... but you are also adding years to my signature! I know I'm 76 but I don't want to think about it.
Regards 71. -
Not very happy with warranty replacement
I am not trying to get something for nothing when I make the statement that I am not happy with the replacement touch that apple sent me for my almost out of warranty touch that completely stopped working. I am happy with the customer service, the easy return and very quick replacement. I am not completely happy with the touch that was sent to me. I can't say that is broken, it is just doggish and seems to have a really short battery life. It really seems slower then my previous touch and has seems to do odd things often, like I open a simple app (like the calendar)and it opens for a second and closes immediately or the response to touch is very slow at times. There is nothing really wrong with it but this is the 3rd own I have owned and it is by far slowest and least responsive. Does anyone have any opinion on if I have any recourse?
Also, When I put in the serial # of this replacement, which I received on the 1st of this month, Apple website tells me that the warranty has expired. I know this to be wrong because of the paperwork enclosed with the replacement said thae warranty is 90 days or remaing period, whichever longer.Send it (or take it to an Apple store with all the relevant paperwork) and get another one.
I bought 3 Touches in the middle of January for my kids and the youngest one's was similar; slow, bad battery life, wierd backlight glitch, apps crashing. Took it to the local retail store and they replaced it with no hassle. I didn't even have my receipt. It was a 4th gen so obviously was less than a year old.
EDIT: I are a gud spellar
Maybe you are looking for
-
Find & Move files based on csv headers
Hi Everyone, Basically, I am trying to find locations for those files listed in a csv file. Content of the csv file is shown below: Name, filename1.xlsx, filename2.xlsx, filename3.xlsx, And this is my code but I couldn't get it to work!! $csv=import-
-
Livetype pretty much just not working, period (unexpected error)
So, I have livetype on my Macbook (it's an older macbook, I got it two years ago) and it's always worked, until the last few months. Now, whenever I open LiveType, everything is all black and weird looking, and I can't read any of the font in the dro
-
BOM change after Purchase order creation
Dear all My client requirement is an error message should appear when the end users are trying to change the BOM after the purchase order creation for the BOM items and the system should allow the BOM change only after the PO cancellation. Please thr
-
I need to chage country, but before I need to cancel balance of U$0.45. How can I do it?
I need to chage country, but before I need to cancel balance of U$0.45. How can I do it?
-
EDI: Table passed to EDI_SEGMENTS_ADD_BLOCK is emp
Hi gurus, I have too many entries in SM58 with error message: "EDI: Table passed to EDI_SEGMENTS_ADD_BLOCK is emp" Scenario is SOAP to IDOC. I checked in XML messages in the pipeline and in the Responses->IDocOutbound I could see the table structure