Hard and soft reset wont work either

Same thing happened here, my phone has been of for three days now and I have tried everything hard and soft reset even other stuff that I found on line that might help still nothing. This is not the first time, this has happened to me like 3 other times.
Never buying a nokia product ever again.

swafdar010 wrote:
 ....even other stuff that I found on line that might help still nothing. 
Did you try Nokia Software Recovery Tool ?

Similar Messages

  • Soft Reset wont work - TE2

    Hi,
    I'm trying to do a soft reset on a TE2 and it just wont work. I tried with a stylus and paper clip and it simply wont reset!
    Any suggestions?
    Post relates to: Tungsten E2

    Is it frozen?  Sounds like the dreaded "E2 coma" syndrome requiring the battery to be disconnected...
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • HT3728 i keep getting "an unexpected error occurred " tried factory and hard and soft resets to no avail. Help??

    Just moved, set everything up with a new bt hub 3 router, imac, time capsule and an airport express. After a power cut, cannot get TC or AE to connect. Tried hard,soft and factory resets. TC is a 3tb, AE is the latest. Airport goes through the motions, both start showing green light and the I get the message, " An unexpected error has occured. Please try again" Help???

    The power cut has corrupted a setting.
    Plug the TC into a computer by ethernet. Do a factory reset and start over.
    Complete the setup.. then do the AE, again directly by ethernet.
    I presume the TC is bridged and plugged into the HH3.. then the express is being used to extend wireless. If not tell us more info.
    When you finish the setup.. in the airport utility use the export configuration to save a configuration copy.. if you get stuck again you can then quickly restore the working config.

  • Ipad displays "ipad is disabled connect to itunes", I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?

    Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
    My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • My lap top wont import pictures from auto play. it keeps saying there is a file error and a device connected to the computer isnt working properly. i have tried going into the internal storage to copy and paste the pictures but this wont work either.

    my pictures from my i phone 4s wont import from auto play. a message keeps coming up saying there is an error and a device is not working properly. also i have tried going into the internal storage to copy and paste them but that wont work either. the page either stops responding or the picture simply dont copy. does any1 have any idea why this is happening. it has never happened before and only seems to be happening since i started using i cloud storage instead of synching my phone with the lap top.

    I have decided to dedicate this thread to the wonderful errors of Lion OSX. Each time I find a huge problem with Lion I will make note of it here.
    Today I discovered a new treasure of doggie poop in Lion. No Save As......
    I repeat. No Save As. In text editor I couldn't save the file with a new extension. I finally accomplished this oh so majorly difficult task (because we all know how difficult it should be to save a file with a new extension) by pressing duplicate and then saving a copy of the file with a new extension. Yet then I had to delete the first copy and send it to trash. And of course then I have to secure empty trash because if I have to do this the rest of my mac's life I will be taking up a quarter of percentage of space with duplicate files. So this is the real reason they got rid of Save As: so that it would garble up some extra GB on the ole hard disk.
    So about 20 minutes of my time were wasted while doing my homework and studying for an exam because I had to look up "how to save a file with a new extension in  mac Lion" and then wasted time sitting here and ranting on this forum until someone over at Apple wakes up from their OSX-coma.
    are you freaking kidding me Apple? I mean REALLY?!!!! who the heck designed this?!!! I want to know. I want his or her name and I want to sit down with them and have a long chat. and then I'd probably splash cold water on their face to wake them up.
    I am starting to believe that Apple is Satan.

  • Just got new hard drive and now itunes wont work

    I had my hard drive replaced in April and started having problems right away. I finally had a chance to bring it in today and they replaced the hard drive again. I don't have an external hard drive so I couldn't back up my music that way, so I tried using CDs and that didn't work either. At the store, the guy that was helping me suggested I use a flash drive. So, he did that for me. He said when I set up the computer I should open the flash drive first and drag and drop the saved music into the music folder and then open itunes. I did the first part but when I opened itunes I got a message saying "The file 'itunes library' cannot be read because it was created by a newer version of itunes.
    Does anyone know what that means? itunes wont open at all and I can't even listen to my old music. Any help would be appreciated.

    Did you try using the File>Add to Library option? I would dump everything you put in the music folder, since it's not recognizing it, and then try to re-import it using that option.
    Technically, the prompt means that you're using, for example, iTunes 7 to try to open a file that iTunes 9 created, and it won't be able to do it. Do you know what version of iTunes you used to create the original file, and which version you're using now? It's hard to imagine the one you're currently using is older than the one creating the file.

  • HT4060 Ive got the ipad 1 and it wont charge i bought a new ipone 4 charge lead but it wont work either what do u recommend

    Ive got the ipad 1 and it wont charge i bought a new ipone 4 charge lead but it wont work either what do u recommend

    Could be the charger, cable or iPad. Plug the USB cable into your computer. It may say "Not Charging", however, it is charging slowly and will verify that the cable is good.
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    iPhone: Hardware troubleshooting (Power/Battery section also applies to iPad)
    http://support.apple.com/kb/TS2802
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    iOS 7 Battery Life Draining Too Fast? It’s Easy to Fix
    http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    iPad: Charging the battery
    http://support.apple.com/kb/HT4060
    Best Practices for iPad Battery Charging
    http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    How to Save and Prolong the battery life of your new ipad
    https://discussions.apple.com/thread/4480944?tstart=0
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    To Extend a Device’s Battery Life, Get to Know It Better
    http://tinyurl.com/b67c7xz
    iPad Battery Replacement
    http://www.apple.com/batteries/replacements.html
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • I have this problem as well. The screen is black . i can.t get it to respond.Power   home soft reset didnt work. Itunes could detect any sync apps. I used my home phone to call my iphone and on my home phone i can hear the calling tone.But my iphone didn'

    The screen is black . i can.t get it to  respond.Power + home soft reset didnt work. Itunes could detect any sync  apps. I used my home phone to call my iphone and on my home phone i can  hear the calling tone.But my iphone didn't ring/screen did not light  up. Its a iphone 4. Any ideas how to fix this?

    If the basics (restart, reset, restore from backup, restore as new) don't work, you'll need to bring the phone to Apple for evaluation

  • My 4th Gen iPod Touch won't open up the apps I've downloaded. I've tried uninstalling and then reinstalling the app and it seems to only be a temporary fix. The reset and reboot didn't work either. Help would be appreciated.

    My 4th Gen iPod Touch won't open up the apps I've downloaded. I've tried uninstalling and then reinstalling the app and it seems to only be a temporary fix. The reset and reboot didn't work either. Help would be appreciated.
    In more specific terms. The apps that came on the iPod like the weather and maps and whatnot have been working flawlessly. It's just when I download an app and then disconnect from wifi it's almost like I'm on a timer until the app stops working. It acts like it wants to open, the screen flashes black then resets to the home pages. I've tried all of the basic fixes, rebooting, reseting, uninstalling then reinstalling. But like in my...long...question, the reinstalling option only seems to be a temporary fix. I just recently downloaded the 5.1.1 udate (I think that's what it was) does that have anything to do with it, or am I just derpy when it comes to iPods?

    Try the other suggestions here:
    iOS: Troubleshooting applications purchased from the App Store
    Then try a restore.

  • I know my back up exists I can see it on disk utility but migration and disc utility wont work to restore my back up on my new hard drive it shows up with the message "this disk is already in use" i am so done. someone pls help me

    I know my back up exists I can see it on disk utility but migration and disc utility wont work to restore my back up on my new hard drive it shows up with the message "this disk is already in use" i am so done. someone pls help me

    Otherwise software may be attempted to access the drive. The the computer up in Safe Mode by holding shift when you turn it on. Also be sure to power off and on the hard drive itself.

  • Help me! I have a new iPad mini that won't turn on. It was working fine this morning then i turn it off and it never turns back on. it doesnt register with iTunes and resetting isnt working either.

    Help me! I have a new iPad mini that won't turn on. It was working fine this morning then i turn it off and it never turns back on. it doesnt register with iTunes and resetting isnt working either. All I did is download instagram and snapchat and poof doesnt work. I have had these apps before!

    Make sure it's plugged into the charger.
    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Home button not working or unresponsive, fix
    http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
    Fixing an iPad Home Button
    http://tinyurl.com/om6rd6u
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • I have the iPod 5th gen. and my iPod wont connect to my wifi. I've tried everything. I reset my wifi networks and it still wont work. What do i do???

    I have the iPod 5th gen. and my iPod wont connect to my wifi. I've tried everything. i rest my wifi networks and it still wont work. What do I do??

    Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar
    For the future, saying you tried everything provides use with zero info as to what you did try. If you really tried everything then there is no way we could help

  • Firefox is refusing to start. It says that my profile is missing, which it appears to be. Yet the way in which one goes about creating a new profile wont' work either. Anybody have a bloody clue what's going on and how to fix it?

    Firefox is refusing to start. It says that my profile is missing, which it appears to be. Yet the way in which one goes about creating a new profile wont' work either. Anybody have a bloody clue what's going on and how to fix it?

    AIR give you classes to detect an on-line or off-line status, it's in 
    this way for the sake of flexibility for instance what happens if you 
    only what to sync  data only on Saturdays at 2 am? If it were done 
    automatically that'll be a problem. And it isn't so complicated.
    You can download the SalesBuilder from AIR examples at www.adobe.com/devnet/air
      it's an application that does everything you have in mind.
    I don't understand your question abou file types.
    An AIR app can communicate with almost every backend served tech 
    CF, .Net, PHP, RoR.
    Sincerely,
    Michael
    El 14/05/2009, a las 8:48, IrishAIRMax <[email protected]> escribió:
    >
    I have to say that I'm loving the picture! well cool!
    >
    Sorry but I don't quiet understand. I thought AIR did the updating 
    automatically? I didn't realise the developer had to program the 
    logic of how the updates take place?  Is it a case in most AIR apps 
    that when online the app updates the server and once every intervel 
    (of however long) the local SQLite DB is synced to the more updated 
    server DB. Then when offline the developer has to sense that the app 
    is offline and store a log manually of the updates without any help 
    from AIR itself, and then update once it comes online again?
    >
    Can AIR link to anything more than a database on the server side 
    apart from webservices, for example .as files or any other file types?
    >
    What type of server is a Flex app stored on, is it a specific Adobe 
    server rather than a Java or .NET server?
    >
    Thank you so much for your last comment!
    IrishAIRMax
    >

  • My iphone 4 randomly froze while i was face timing and now its just a black screen with thin grey lines on it. it wount turn on even if i press the lockscreen or home screen button. ive tried chargingit but that wont work either.

    my iphone 4 randomly froze while i was face timing and now its just a black screen with thin grey lines on it. it wount turn on even if i press the lockscreen or home screen button. ive tried chargingit but that wont work either. It's been like this for about two hours now.

    Hold down the Home and Power button for 20 seconds. And try to update again.
    Also read and follow this:
    http://www.apple.com/support/iphone/assistant/restore/

  • Hi I updated my apple tv box and now it wont work? Can I reset it?

    Hi I updated my apple tv box and now it wont work? Can I reset it?

    That usually indicates that security software is interfering with the process
    See
    http://support.apple.com/kb/TS3125

Maybe you are looking for

  • Issue with variable while in a PSSession connected to an end point

    Ok so Ive put together a simple script that will allow our helpdesk to look at permissions on a specified folder or share adn display in a nice html page.  I need it to run under different credentials so I set up an endpoint which I can connect to re

  • Can one DISBALE "Save as Source/Movie" for a Quicktime file on the Web ?

    I recently learned how to assign quicktime files to links on the web. When you select a link, a new window opens up and the sound file begins to play automatically. I noticed that the listener can save this file to their desktop. IS IT POSSIBLE TO PR

  • SQL Bulk Update using Update query in SQL Table

    Hello All, I want to update data in sql table depends on some condition. I am getting excel sheet from client and want to change value of field say Status = c. Client is sending excel sheet with 300 field and want to change value for all 300 records

  • Psrset and psradm vs. projects

    I just took over admin of several Solaris 9 systems where the last admin walked out. I am still trying to iron out what is what here. On one system, the admin had left a startup script in /etc/rc3.d that used psrset and psradm to create a processor s

  • TPSDLS idoc to be triggered only when deleting the delivery

    Hi, We have a requirement: We should be trigerring the TPSDLS idoc only when deleting the delivery in SAP. Currently, we generate the TPSDLS idoc when creating and deleting the delivery. The Changes we tried did not help us in anyway.As we are seeing