Hard Cases (water/weatherproof) for Zen Produ

Hello, I hope this post has not been asked. Does anyone make protecti've cases for Zen products? Ipod has several makers of waterproof cases. I just read an Ipod magazine yesterday and did not know that Otterbox makes cases for Ipods. I looked several places but did not find any similar product for Creative products. Why can't Creative li've up to it's name and think "outside the box". Did you know that you can take an Ipod diving or swimming in a pool? Wow, what will Ipod do next? My question is very relevant to where I work, out at sea. Where saltwater and electronics don't mix. My buddy on the same job has an Ipod and is going to get a protecti've case for 50$. I on the other hand have to be very careful not drop my player or get it wet. I'm hoping for some good news on the question.
Thank for this forum.
I have a 40GB Zen Xtra (my second one, first one was stolen)Message Edited by ajacs on 08-20-2005 02:9 PM

Look at Peli/Pelican cases.
020 is just right foir the Zen Vision, although you can't seal the case + use the player at the same time i.e. no jack connectors etc.

Similar Messages

There's a hard case I like for the ipod, but would like to back it with a clear silicone case on top, Is there a clear case that would actually fit over an all ready covered iPod?

Double Layer Hybrid Hard Gel Case Cover for iPod Touch 5th Gen Built In Screen. Plus, my thought was to find a great cover and keep it in my purse - i have a thick purse and don't hit people with it, so my ipod would be safe in there right? I'm slightly concerned my screen would break as I don't know how easily breakable the screens are. Input? TIA

Try here:
iPod touch: Hardware troubleshooting
iOS: Not responding or does not turn on
To get the calender and contacts back if you can't get the iPod working is to restore the new iPod from the backup of the old one.

Which case to pick for 5G 30gb (and I have the Altec IM7 specker dock)?

I have the Altec IM7 speaker dock (which is GREAT!) but this means I need to remove any case before docking my ipod. I can't decide between the following cases (all of which I have read great reviews on, but I need to know which are the easiest the take off, as I will be doing that frequently...)
I plan to keep the ipod in the case (for scratch & shock protection) when I take it out of the IM7 dock.
Iskin's Evo3 .... which looks the best, but is it hard to remove/put on? I really like the clip and air holes in back.
Speck Products' SkinTight ... easy on/off? will frequent on/off cause problems with the screen protector part (maybe dislodging it, then causing scratches?)
Speck Product's See-Thru ... these look sexy, keeping the shiney look of the ipod, but they are also so new, no reviews around, has anyone got ones? how easy for on/off? will heat build up under the hard cases if on for long periods?
Agent 18's Hard Case ... nice clear look, but how easy for on/off? Heat build up issues?
Thanks in advance for your comments!
- A new Happy Ipod Owner

5G 30GB and 60GB iPods in iSkin's evo3 case fit in Apple's Universal Dock, with no insert.
Easy on; haven't removed it, but it should come off easily.
One quibble: The Hold Switch cover on the case. It takes a certain techniqe with a fingernail on either end of the cover to move the underlying Hold Switch. iSkin doesn't say anything about this in the instructions. Once learned, it's easy to put the iPod on hold.
Recommend.
Bucky

Zen jukebox Xtra hard case/cassette adapt

Hi there-
I just got my Zen jukebox Xtra and I'm really enjoying it so far.
There are two things I'd really like. A hard case to protect it and a cassette adapter, so I can use it in the car. When I looked for accessories here at the Creative site, all I saw was an adapter for the larger model. Can that be used for my version?
Also, does anyone have a hard case and what brand/where did you get it's
Thanks so much for the help!

I'm about 75% sure the casette adapter at the creative store will work with the Zen Xtra... if not, any other brand will work as long as you can plug it into the headphone jack. I use the one that came with my old Sony Walkman, and it works flawless.
As for a hard case, I found the case that came with the Xtra to be hard enough for my needs. This is the one that came with my Xtra.
There aren't many other cases out there for the Xtra. Vaja cases makes one, but it will cost you around $60.

I want to buy a hard case for my macbook pro, but I don't know what year it is. When I use the serial number to try and find out, all it says is, "~VIN,MacBook Pro (15-inch Glossy)". When I type that into amazon for a case it gives me nothing!

I want to buy a hard case for my macbook pro, but I don't know what year it is. When I use the serial number to try and find out, all it says is, "~VIN,MacBook Pro (15-inch Glossy)". When I type that into amazon for a case it gives me nothing!

Hi T,
Either of these will give you the info you seek:
http://www.appleserialnumberinfo.com/Desktop/index.php
http://www.chipmunk.nl/klantenservice/applemodel.html

Can anyone tell me if they know where I can find a hard case for the new Retina Macbook Pro?

Can anyone tell me where I can find a hard case for a new 15" retina macbook pro?

I have not tried this.
http://www.amazon.com/Kuzy®-MacBook-Display-Rubberized-Aluminum/dp/B005G88RC4

I want to get a hard case for my macpro.. Is this a hard case or silicon? Speck 13" SeeThru Satin Case for MacBook Pro and MacBook

I want to get a hard case for my macpro.. Is this a hard case or silicon? Speck 13" SeeThru Satin Case for MacBook Pro and MacBook. Says hard cse but then easy to grip...anyone have one?

description directly from the website: "Form-fitting hard-shell protection with a smooth, grippy, soft-touch feel."
https://www.speckproducts.com/seethru-satin-macbook-pro-case-13-black.html

Clear hard case for MacBook

Hi, I have a 13" white MacBook that I got in June of 2009. I've been trying to find a clear hard case/cover for it, but none of the ones I've found, online or in stores, will fit mine. Most of the ones I've found are for Unibody or MacBook Pro. I've ordered 2 that were supposed to fit, and neither one did. Does anyone know where I can find a case that'll fit the 13" Mid-2009 MacBook? Or does anyone know of a site that can help me identify which cases will fit? Any suggestions would be much appreciated.
Thanks so much!

Here's some on eBay http://www.ebay.com/sch/i.html?_nkw=13%22+old+macbook+hard+case&_trkparms=65%253 A1%257C66%253A2%257C39%253A1&rt=nc&_sticky=1&_trksid=p3286.c0.m14&_sop=12&_sc=1

Hard case for the air?

Hi all,
I've ordered an entry level 13 inch macbook air with 4gb ram today. However, I've been trying to find a hard case for my new air for the last couple of hrs without any success.
Can somebody please suggest to me some cases with a soft inner lining and hard outer shell? Or a hard shell case for the air?
Thanks

Hi David,
Thanks for the suggestion. The Pelican case looks really good, but it’s a bit heavy when combined with the air. The total weight will be the same as my old 15” macbook pro, which defeat the point of me getting the air as a light weight laptop.
I did found couple of interesting cases from a company called Cumpler.
Hard Suit 13" Air:
http://crumpler.co.uk/?product=HardSuit_17%27%27_wide&page=details&productline=983
Hard Suit Special Edition 13" Air:
http://crumpler.co.uk/?product=HardSuit_Special_Edition_13%26quot%3B_Air&page=details&productline=952
They have a store in central London, so I’ll go and have a look this week.
Hi n_n,
I had an Incase hard shell on my macbook pro, and there were few cracks on the corners of the case after few months of use. So I want either a clip on hard shell or a carry case with hard top; bottom and edge protection for the air without adding too much weight.

Hard Case for Macbook

I have a hard case (made by Speck) is it safe for my Macbook Pro? I'm concerned about it blocking the ventilation

Cases of any sort hinder the MPB's cooling requirements. Get whatever you want but don't be surprised when it runs hot.
My Powerbook withstood over a decade of daily typing. The keys are fine. Just don't spill anything on it.

Hard Case for ibook G4 14 inch

I am in need of locating a snap on hard case, preferably in red, for my ibook. I have searched for many days but to no avail. I have checked Spec, Ebay, Macworld, etc. Would appreciate any suggestions.

If your battery is not in the recall group (mine missed it by a few digits this time), I would not worry too much. However, if you really smell smoke, or see it, remove the battery.
Also, where is your iBook getting hot? On the left or right side? On the palm rest? If it's the palm rest on the left side, it's the hard drive causing the heat, because that's where it is. If it's the right side, it's the battery, because it's just under there. I have an iBook G4 12" model, and the right palm rest never gets hot. The left one, where the hard drive is located, does, and this is normal, unfortunately.
Please remember to mark this reply as helpful or solved if it has solved your problem or answered your question. Thanks!
Dennis R. Metzcher

Transparent Hard Case For 15 inch MacBook Pro

OMG this is so cool, im going to get one for my other lap top :D!
http://gavilan1010.wordpress.com/2006/10/14/transparent-hard-case-for-15-inch-ma cbook-pro-2/

Hi Everyone,
I am one of the engineers at Speck involved in designing and launching the MacBook See Thru Case. Thank you for your interest and feedback regarding this product. However, after reading through this discussion page, I feel it is necessary to dispel some misconceptions about this case. We are a case company that has been designing, engineering and selling cases for years. I'm not sure which Agent 18 case (great cases by the way) is being referred to in the previous thread, but without knowing the exact case, I am assuming there are inherent differences in the mounting system used. Specifically the following:
1. The "Sandpaper effect" occurs when two surfaces rub against each other. In the example with the ipod case, I believe (and because I don’t know which case it is, I can be wrong) that the scratching was a result of the ipod sliding into the case, or sleeve. Typically hard PC cases have tight tolerances, which leave a minimal amount of clearance. Because of this, the ipod is more likely to be scratched when inserted into the case. However, unlike the ipod case example, the Macbook case clips onto the MacBook. Instead of a sliding motion, the MacBook See Thru is a snap on and lift off system. Also, because the See Thru is clipped onto the Macook, it is a static system, thus no surfaces would be moving against each other.
2. More importantly, we designed the MacBook See Thru with small spacers that keep a minimal distance between the surface of the See Thru and the MacBook. This means that unlike the Ipod case that sits against the surface of the Ipod, the MacBook See Thru maintains uniform clearance.
Lastly, from a consumer standpoint, and user of many, many different CE devices, I am always hesitant to use adhesive films on my products. In my experience, they tend to leave a residue, which is sometimes difficult to get off, and makes your device have a higher affinity for dirt. This is not to say that all films are created equal (because there are some companies that have engineered them not to leave as much of a residue). Also, films tend to scratch and rip easier. Please remember that there may be some bias in my comments (being a Speck engineer that has been so involved in this project), so take them at your own discretion. But don't take my word for it, go out to the Apple Store and check them out for yourself. I think you won't be disappointed.
Other OS MacBook Pro 15, MacBook 13

Desperately In Need Of Case For (ZEN MicroPho

I've done hours of research but can't come up with any Microphoto Cases, I realize the normal Zen Micros cut off the top of the ZMP's screen. I don't want that, at this point I'll take anything from Silicon to Aluminum cases. Anybody have any ideas?
(Please no Altoids Tin)Message Edited by AnDrew005 on 02-3-2006 04:50 AM

on my zen micro i simply use a case-logic soft/spongy case. this is for a dsc-p9. i had to modify the clip as it was a loop. here in thailand i was able to find a clip (use an old clip from cell phone case) and sew it into the thing. punch a hole in the back for the line. im pretty happy with it although its a wee bit short with the jack atthe top - us0 bucks.
th ebiggest issue youll have fashioing a case is the jack at the top. enuff clearance for teh jack, but not a suitcase on your belt.

Looking for a hard case

I have a 17" MacBook Pro (non-unibody) and I am looking for a good hard case for it. Not something that stays on it, but like a sleeve type thing that will protect the laptop while it's in my bag. It needs to provide protection from dents and would be great if it was padded. However, it cannot add too much bulk (some is OK) so it will still fit in my bag. Any suggestions?

I also highly recommend MacTruck for extensive travel although I don't consider doing so as overkill. I use this when traveling by plane and train. Otherwise, for everyday travel usage I use Speck cover.

Design your own hard case for the iphone

So, i'm watching one of my favorite shows, PSYCH, and I notice that the main character, Shawn, has his own company logo on the hard shell case for his iphone and i'm wondering, "where can someone go to create their own hard shell (not sure if it's metal or just hard plastic)case for the iphone....3G specificially?" and I tried REALLLY hard to find some kind of answer through google with NO HELP WHATSOEVER.I would like to create my own hard plastic/metal case/shell/skin for my iphone..with my own company colors and logo/text. Anyone got any ideas where I can go?

Let me know if you've found a customizable iPhone case supplier! Thanks!

Hard Cases (water/weatherproof) for Zen Produ

Similar Messages

Maybe you are looking for