Hard disc dead??? flickering folder with question mark on start up

I get a flickering folder with question mark on start up, and i cant get into mac osx.
I tried the hardware test and it detected no problems. Ive tried to do an install with the disc but no harddisc was detected to install it on.
I cant believe my harddisc is broken all my work is gone (backing doesnt help with configurations etc)

I know many of you don't understand english. Basicly what the articel tells us is that there is a problem with the harddrive due to a contruction caused error.
I would say please do something about it. Start a program to solve this problem
Thank you very much (my seagate still works, lets see for how long!!!
Der Festplatten- und Datenrettungsspezialist Retrodata aus der englischen Grafschaft Hampshire gibt eine beunruhigende Warnung an MacBook-Besitzer heraus. Apple-Notebooks, in denen ab Werk Seagate-Festplatten arbeiten, sind nach seinen Untersuchungen mit einem Fabrikationsfehler konfrontiert, der zum Totalausfall der Festplatte mit einhergehendem Datenverlust führen kann.
Nach eigenen Angaben erhält der Spezialist eine Vielzahl dieser ausgefallenen Platten zur Wiederherstellung von Daten. Die Untersuchungen von Retrodata zeigen, dass der Schreib-Lesekopf der Festplatte mechanisch ausfällt. Dies führt dem Spezialisten nach zu tiefen Kratzern auf der Oberfläche der magnetischen Scheiben mit entsprechenden Datenverlusten.
Anwender können schnell selbst feststellen, ob ihr MacBook gefährdet ist. Die betroffenen Segate-Platten sind ausgestattet mit der Firmware in Version 7.01. Zeigt der System-Profiler, zugänglich über den Befehl “Über diesen Mac… / Weitere Informationen” im Apfel-Menü, in der Kategorie Serial-ATA ein Laufwerk mit der Hersteller-Kennung ST und der Versionsnummer 7.01, dann besteht nach diesem Bericht ein hohes Ausfall-Risiko. Die Firma rät allen betroffenen Anwendern ein Backup der Daten anzulegen und umgehend ihren Händler zu kontaktieren.

Similar Messages

  • Hard drive crash? Folder with question mark

    Hi everyone! I had problems with my macbook pro (early 2013). Last week, it slowed down suddenly and the laptop heats up during sleep. Then the hard drive recently crashed, at least I thought it crashed after it showed the folder with question mark during startup and did not show my old hard disk drive. Now I bought a 1TB WD mainstream hard drive disk, unfortunately it does not detect it in the internet recovery (disk utility). Now my question is, Do I have to do something with the hard drive first for my laptop to detect it? Like formatting it? The box said that it is compatible with mac OSx Lion, but my internet recovery lets me install Mountain Lion only. Is that the problem? or is the problem internal like the cable that connects the hard drive to the logic board?

    That depends on the type of drive you have. If it is a standard external drive (in an enclosure) you can connect the drive with a USB cable.
    If it is a bare drive like this:
    You will have to put it an enclosure and get a usb cable. External drive enclosure are < $10. They come in two sizes, 2.5" and 3.5". Buy one that's correct for your drive. http://www.amazon.ca/MOGOI-Enclosure-External--Silver-Accessory/dp/B00HC107R6/re f=sr_1_5?ie=UTF8&qid=1404755872&sr=8-5&keywords=disk+enclosure

  • Flashing folder with question mark on start up + many other issues

    About 6 months ago I first encountered the flashing folder with question mark on startup. I fixed the issue myself by unplugging the mouse and keyboard and rebooting. I also did the cmd S fsck -fy before that and all was well.
    The other day I had the flashing folder again...I got it going a couple of times but it happened again. Right now I seem to be in deep trouble. Please read the following:
    1. I booted up from the leopard dvd and no hard drive was there to run a disk utility on
    2. Booted up again from the dvd and hard drive was there. Ran the disk utility and everything was fine...for about 5 minutes. Then the computer froze and I had to hard power down. Rebooted to the flashing folder.
    3. Did command s and fsck but at the end I get the message failed to issue comm reset after 3 attempts.....failing....
    4. I powered down, vacuumed out the vents, sprayed compressed air to make sure it wasn't over heating from dust buildup as I read somewhere.
    5. Booted up...worked for about 5 minutes again.
    6. Now I can't get to the hard drive from the install dvd at all...I tried 100 times. Cmd s won't work at all!! So it looks like I am out of options. Does anyone have ny radical solutions that i can try to fix this. There are some very important things on my hard drive that I would be very upset about loosing.
    Please reply

    Sorry to bear bad news, but most likely the drive is already dead or dying. I hope you backed up everything when the first symptoms appeared.
    There are data recovery services, but might be very expensive.
    EDIT: Some (a few) people have had success putting the drive (sealed very well in a plastic baggy) in the freezer overnight and then quickly putting it in an external enclosure and getting the data off it that way.
    Message was edited by: WZZZ

  • Folder with Question Mark on Start-up/ DOS-like screen with errors now...

    Left my Mac Pro running last night, woke up to it being frozen (looked like it was
    in hibernation mode and wouldn't wake up).
    Forced a shut down from button on tower - on start-up, went gray screen
    with blinking folder with question mark.
    Inserted install disc 1 and held down 'C' - Went to choose your lang menu,
    I picked English, went to choose start-up disc. Options were the install
    disc and a network drive with a question mark. I picked drive with
    question mark.
    Computer looked like it was trying to restart, apple with loading circle
    spinning, and then blinked to a black screen that looked like DOS that was
    blinking error messages (one message was "diskOs2 undefined Oxe0030005")
    Any suggestions?
    Mac Pro   Mac OS X (10.4.9)  

    Was there a storm or outage that could have brought it down? for now it sounds like a kernel panic screen is what you are seeing. If you don't have a UPS, I wouldn't be w/o. Never know when one of those high winds will knock out power.
    You could try to do an SMC Reset and see.
    I assume you usually sleep the system and it doen't have trouble with wake from sleep, and you haven't altered the system (new hardware etc) in any way that would change that.

  • Folder with question mark at start up

    Why a, I ratting a blinking folder with a question mark at start up.  My MacBook will not open beyond that.  Is it a ram issue?

    That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the Operating System data on the hard drive is somehow corrupted.
    Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
    When it does start up, you'llsee a panel asking you to choose your language. Just press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
    If it is then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions.
    If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

  • Hard Drive Failure (Flashing folder with question mark!)

    After reading some of the topics on the forum, I know that the flashing folder with the question mark that I get when I try to turn on my Macbook is hard drive failure. I know to fix it that I need to Boot with the Installer Disk in the Drive, holding down The C key. But, will doing this destroy all of my pictures and other content? My pictures are really important and I dont want to lose them and I never backed them up ( dumb move, I know!).
    Thanks!!

    There are two basic possibilities when you get the flashing ? : 1) the hard drive is physically damaged or dead and 2) the hard drive has data errors
    When you attempt to boot up with the system disks and then switch to Disk Utilities, the first thing to look for is if the program sees your drive. If it doesn't the drive is almost certainly dead and getting data from it will be costly. If the program does see the drive you'll want to attempt to repair it - press the repair button. If the repair fails, another repair utility may be able to repair the damage, at least well enough to get your data off. That program is DiskWarrior. If the repair succeeds the computer probably will need to have the OS reinstalled - my experience is about 90% of the time the repair fixed the drive but left the OS damaged.
    When you reinstall the OS select options on the first screen beyond the language selection screen. Here you can (hopefully) select Archive and Install. This option will install a new operating system but leave the programs and data unchanged.
    <short lecture on>As you've learned, it isn't if your drive sill sometime fail, it is when. Hard drives are relatively inexpensive. Buy one and backup your drive at least weekly. At the very least purchase a flash drive large enough to copy your very very important data and burn a DVD every week or month.<short lecture off>

  • I upgraded to mavericks yesterday and now i have the folder with question mark on start up

    I've tried booting up pressing the option key and i get to the startup utility section but it won't let me erase, re-install or anything

    Question (?) Mark, Blinking Folder, or Gray Screen at Startup
    These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
    A flashing question mark appears when you start your Mac
    Mac OS X- Gray screen appears during startup
    In most cases the problems may be caused by one or more of these:
    Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
    Boot drive's directory has been corrupted - Repair with Disk Utility.
    Critical system files are damaged or deleted - Reinstall OS X.
    The disk drive is physically non-functional - Replace the hard drive.
    Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
    Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
    Reinstall Snow Leopard Without Erasing The drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    Reinstalling Lion/Mountain Lion Without Erasing The Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • Folder with question mark on start up

    Hi all
    I began downloading updates on a macbook laptop and then cancelled (10.4.1). I then started doing a couple of other things (viewing pdf and safari). When I went to quit these programs the coloured circular processing wheel came on screen for extended period of time. Therefore out of inpatience I turned the lap top off by holding down the power button. Upon restart I got the folder with the question mark. I have read and tried all the available options,
    - Start up from system software CD - Disk utility - Repair - Did not work
    - Safe start - couldnt get it to work
    - Reset PRAM - didnt change anything
    I am considering reinstallation but am worried about losing everything on HD. Do you have any suggestions. Any help would be appreciated.

    It's certainly worth a shot, but I don't think it will work--and you'll want to backup your data just in case.
    How much space is on that other computer? Do you have a FireWire cable?
    If you have a FireWire cable, connect one end to the working Mac and the other to your MacBook. Boot your MacBook while holding down the T key. Your MacBook should load with the FireWire icon on the display--it looks like a Y. On the working machine, your MacBook should appear as an external hard drive called "Macintosh HD" with the FireWire symbol. Best option after this would be to create a folder on the working computer--called "MacBook" perhaps--and move any files you want to save over there. Not sure if there's a way to preserve settings (ie iTunes library information) by copying the folders, but I can try to find out. Copy data from your Users folder.
    The Applications folder may not copy the contents over if you just drag and drop--and if any of those applications were installed with a CD/DVD or other installer, rather than just dragging and dropping, you'll need to reinstall later.
    ~Lyssa

  • Blinking folder with question mark at start up

    When i turned on my iMac I was surprised to see a folder icon blinking as it was running fine before this. I didn't delete or install anything.
    My DVD drive does not read properly so i am unable to boot from the installation disk, tried to boot using BootCD from Charles Soft that didnt work either. Even tried resetting PRAM/NVRAM, unplugged keyboard and LAN cable as well but still no luck.
    Read many articles online regarding this issue and it seems that my hard disk must have crashed. I don't have backup of any files.
    Can anyone please help me resolve this issue? I desperately need my data back
    Please help.

    Whew, yes, at the very least it's having trouble with the Data on the Drive.
    Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
    /sbin/fsck -fy
    Repeat until it shows no errors fixed.
    (Space between fsck AND -fy important).
    Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
    http://docs.info.apple.com/article.html?artnum=106214
    Do you have another Mac with Firewire & a FW cable?

  • Switched on my imac 24inch intel based and all I get on screen is a folder with question mark flashing,I had backup on external hard drive but when I try to reinstall it can not find my mac hard drive

    Hi when I started my intel based imac this morning all I am getting is a folder with question mark in the middle flashing,I have external hard drive with backup,but when run disc utilities it does not show my mac hard drive.hope someone can help.(it's running mountain lion, well it was)

    Try starting up your Mac while holding down the Option key. That should prompt the Startup Manager window where you can select the startup disk then click Restart.
    The question mark folder indicates your Mac cannot find a system folder to boot from.
    A flashing question mark appears when you start your Mac

  • Installed new hard drive in imac and i get folder with question mark, put in OS install disk and it does nothing? All I have is wireless key board and mouse, is this a factor?

    Installed new hard drive in imac and i get folder with question mark, put in OS install disk and it does nothing? All I have is wireless key board and mouse, is this an issue?

    Other than put disc in you don't give much info about what you've done. With the install disc inserted restart your Mac while holding the C key, that should start it up from the install disc. Should also work fine with a wireless Apple keyboard.

  • Blinking folder with question mark! Recovery mode not recognising hard drive!

    So today on my MacBook Pro 13" mid 2010, for some reason a CD that I inserted inside the DVD/CD drive didn't come out, and was stuck inside. So I looked up on how to force eject it out, and I saw someone wrote that you can force eject the CD by putting a paper clip inside the hole next to the CD/DVD drive. I did this, and it did not work. After I turned on my MacBook Pro and on the startup I found the blinking folder with question mark! I went through Internet recovery mode, and I found out that it did not recognise my hard drive!
    -Do I have to replace my hard drive?
    Please help! I'm fairly new with computers :(

    Kazmunai wrote:
    I saw someone wrote that you can force eject the CD by putting a paper clip inside the hole next to the CD/DVD drive. I did this, and it did not work.
    That was for very old Mac's and PC's, it's been a long time since any modern Mac had that ability.
    CD that I inserted inside the DVD/CD drive didn't come out, and was stuck inside.
    Press and hold the power button down to force a hardware shutdown.
    Hold the trackbutton down and the option/alt key at the same time, now boot the machine.
    The disk should spit out and you should eventually see a row of icons appear on the screen, this is Startup Manager and you can pres the eject key here also to get the cd to spit out.
    If you see MacintoshHD (or your OS X boot volume) click it and the arrow underneath and when you get into OS X, head to System Preferences > Startup Disk and set it again. Your problem should be resolved at this point.
    If you don't see your OS X boot volume and it shows RecoveryHD only, or holding the option/alt goes to Internet Recovery, then your boot drive is dead or there is some sort of other issue/power /Mac related.
    Try a #1 SMC Reset and a #2 PRAM reset and see if that fixes things.
    ..Step by Step to fix your Mac
    If not, I then suspect because you couldn't eject the cd that something electrical bad happened to the Superdrive and as a result it also effected the power or something going to the boot hard drive.
    The hard drive might still work just fine if it's removed from the machine and a SATA to USB adpater to another Mac.
    My advice is to take the machine to Apple for a free hardware evaluation, then decide what you want to do from there.
    My computer is not working, is my personal data lost?

  • Not solved with Blinking Folder with Question Mark after Erasing Hard Drive

    Before asking, I found someone had asked exact the same question, but that was actually an unsolved thread.
    Re: Blinking Folder with Question Mark after Erasing Hard Drive to try to restore to Factory Settings
    Level 1(0 points)sdc3gJul 5, 2013 6:24 PM Re: Blinking Folder with Question Mark after Erasing Hard Drive to try to restore to Factory Settings
    Re: Blinking Folder with Question Mark after Erasing Hard Drive to try to restore to Factory Settings 
    in response to Niel
    Thanks for the reply, held command+R again and it is trying to pick up WiFi, but it's not picking up my network and won't accept the password even when I try to put it in manually. Any thoughts on that?
    Me too had tried the command+R and failed to manually connect to my network. Can anyone help?

    Well, it was solved. I shifted to other place and tried other WIFis. One of the WiFi had the 2002f problem and another was fine, so the reinstall worked smoothly eventually.
    On the apple support page it says that Supported network configurations and protocols includs both WPA/WPA2, not matter what they are, but it might not be true.

  • Blinking folder with question mark, and disk utility doesnt recognise hard drive, please help!!!

    So today i was using my macbook pro and for some reason my CD/DVD drive was causing noise when i put a DVD inside it, and for some reason it did not recognise my DVD. I force ejected it using the restart and clicking, but after that my computer showed a blinking folder and question mark during start up. I restarted my computer to Recovery HD, but instead it took me to internet Recovery HD (i have mountain lion), and so i went to disk utility to repair my disk, but in the left it did not recognise my hard drive. Please help! Im not that experienced in computing!

    Sounds like some sort of power issue and now your drive is not working.
    You'll have to take this to Apple for repair.
    You should read this if you don't have recent backups of your data off the machine.
    My computer is not working, is my personal data lost?

  • Boot up shows folder with question mark...

    So my imac from 2006 (i think...20 inch plastic intel) booted up today to the blinking folder with a question mark on it. I rebooted into the osx disc to set the hdd as the startup disk, but it didn't show up in the list. Then I tried to see if I needed to repair the hdd using disk utility but the hdd wasn't showing up. So, do I have to replace the hdd? Not looking forward to it if I do.
    Message was edited by: gescamil

    Hi,
    I have had similar issues, you will have to restart it and press and hold the eject disk on the keyboard right away and it will force it out.
    Also to answer you question on way you are not seeing the Hard Drive and way you have the folder with question mark on the start up: is because your Hard Drive is dead.
    You will need to buy another Hard Drive install it and then fresh install the OS X.
    I have seen this issue too many times and every time is resulting with bad Hard Disk Drive...
    Look at the bright side, Hard Drives are cheep now and you have iFix it to assist you on step by step installation. (this is unless you have Apple Care).

Maybe you are looking for