Hard disc does not exist? g series

hi my notebook (hp pavilion g series 750g, 6 memory) has been rebooting its self then a black screen saying hard disc does not exist, then it won't let me on pc, any idea's please?
This question was solved.
View Solution.

Hi
Please try these steps might help you to fix the issue.
1) Once unit is powered on keep tapping the F10 key go to Diagnostics and check if the Hard drive is detect if Yes please run the test and if is working fine. Incase Hard drive is not getting detect please reseat the Hard drive from the back panel off the Notebook. Incase you have the same issue. Please check the warranty status and get the drive replace please call HP Technical support for the same.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Similar Messages

  • New Hard Drive Does not exist!

    Hello, 
    I have an HP DV6 -3142 Laptop and recently after owning it for around a year, my hard drive seems to have crashed. When I try to boot up the laptop, it asks me to use system repair to "repair" my problem or start windows normally. Booting normally causes the laptop to be stuck at windos and revert back to booting up again (it's like a closed loop!). If i choose to "repair" I get stuck at a blue screen where the HP system recovery is supposed to help me either reset to factory settings or do a system restore. I also did a hard disk test in the BIOS and got an error 303. I had done a bit of research and from what i heard, It was a hard drive problem. I got a new hard drive (Samsung) and now when I try to install windows 7, It says that there are no devices to load windows 7 onto. In other words, the Hard disk does not exist (also did a test in bios). I tried to reseat the hard drive and reset BIOS, it didn't work. Now, when I try booting the new hard drive, it shows me a message saying "Media test failure: check cable".
    Any ideas on how i could go about fixing this problem?

    Welcome Larg.
    Sorry but it sounds like your new hard drive is DOA.
    If you have a SATA to USB I would hook it up to another computer and  test it that way.
    Or you may try to install it in another computer and see if you can test it that way.
    Sorry.
    REO
    HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
    Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
    Microsoft Registered Refurbisher
    Registered Microsoft Partner
    Apple Certified Macintosh Technician Certification in progress.

  • 3F0 Error, Hard drive does not exist on Pavilion dv4.

    I have a Pavilion Dv4 with windows 7 OS. 
    When I boot up the computer it tells me "No bootable device -- insert boot disk and press any key"
    I have done the F2 system diagnostics and once I get there click the Hard Disk Test which brings me to where it says "Hard Disk Not Exist. Press <ESC> to continue" and prcoceed to hit Esc where it tells me the Hard disk test failed and "Boot device not found (3F0)" 
    After which I restarted and hit F10 to get to the BIOS which I then went to Diagnostics and tried to run the "Primary Hard Disk Self Test" and then it says "Hard Disk Not Exist" still. The memory test runs fine passes and gives me no errors. 
    I have also done a hard reset and have re-seated the hard drive and NOTHING has worked. Help would be appreciated because this has been happening for a VERY long time (just happened to be after the warranty ran out, convienent eh?) and I lucky had my fiances older laptop which is very old. 

    The notebook is not able to recognize the Hard Drive.
    Are you shure that warranty of your PC has ended? Keep in mind that warranty starts from the date that you buy the PC.
    If the Hard Drive test shows that the test failed, you will have to get it replaced. I suggest you to call HP technical support and get their advice on the available options for service.
    I'm an HP Employee.
    The opinions expressed here are my personal opinions, not of HP.
    Click on Thumbs up if my post helped you.
    Make it easier for other people to find solutions, by marking an answer “Accept as Solution” if it solves your problem.

  • Memup hard disc does not show in Finder

    I have attached a Memup 250GB hard disk by USB to my MBP. The disk does not show up in Finder, nor in Disk Utility.
    The disk works fine if I plug it into a PC. I have formatted it on the PC to FAT.
    Any suggestions on how I can get it to work on my MBP?

    Sounds like you have a connection issue.  Try all the USB ports and a different cable.
    Ciao.

  • Disc does not run down on power save iMac 27 Lion

    My hard disc does not run down when the computer goes into sleep on power save.  It does run down when I put it into sleeo manually.Is there a cure? Its a brand new 27 inch Mac with Lion

    Do you still have the problem? I experience the same issue but not every time I shut down. I hope for a fix with the next release...

  • Type com.sap.xss.ser.xssmenu.model.types.P_Pernr does not exist

    Hi there,
    same Thread I post in "Portal Developement". Now I try my luck in ths category...
    we implement ESS (ERP2004 with WebDynpros) in our testsystem, but we got an error and don´t know what to do...
    System Landscape:
    - mySAP Enterprise Portal 6.0 SP17
    - Java Application Server (excluding from HR)
    - mySAP ERP2004 HR-System
    The Connections from the portal runs to the Java-App-Server, not direct to the HR-System (HR-System has no Java Installation and our Customer don´t want a installation, because it could be a bad performance)
    We implement the Jco´s and fill out the usermapping. If we want to call the firstpage of the new ESS-Role we get this error.
    Can anyone help us? Do we need some installations?
    Best regards
    Christian
    Error
    500 Internal Server Error
    Web Dynpro Container/SAP J2EE Engine/6.40
    Failed to process request. Please contact your system administrator.
    Error Summary
    While processing the current request, an exception occured which could not be handled by the application or the framework.
    If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
    Root Cause
    The initial exception that caused the request to fail, was:
    com.sap.dictionary.runtime.DdException: Type com.sap.xss.ser.xssmenu.model.types.P_Pernr does not exist
    at com.sap.dictionary.types.mdi.util.ProviderUtil.createAbapTypeXmlMap(ProviderUtil.java:400)
    at com.sap.dictionary.runtime.mdi.DataProvider.createSimpleTypeFromAbapType(DataProvider.java:586)
    at com.sap.dictionary.runtime.mdi.DataProvider.getDataType(DataProvider.java:286)
    at com.sap.dictionary.runtime.DdDictionary.getDataType(DdDictionary.java:95)
    at com.sap.dictionary.runtime.DdBroker.getDataType(DdBroker.java:164)
    ... 54 more
    See full exception chain for details.
    System Environment
    Client
    Web Dynpro Client Type HTML Client
    User agent Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322; InfoPath.1; .NET CLR 2.0.50727)
    Version
    DOM version
    Client Type msie6
    Client Type Profile ie6
    ActiveX enabled
    Cookies enabled
    Frames enabled
    Java Applets enabled
    JavaScript enabled
    Tables enabled
    VB Script enabled
    Server
    Web Dynpro Runtime Vendor: SAP, Build ID: 6.4015.00.0000.20051123162612.0000 (release=630_VAL_REL, buildtime=2005-12-14:21:51:22[UTC], changelist=377533, host=PWDFM026)
    J2EE Engine No information available
    Java VM Classic VM, version:1.4.2, vendor: IBM Corporation
    Operating system AIX, version: 5.2, architecture: ppc64
    Other
    Session Locale de
    Time of Failure Thu Jan 11 16:14:11 GMT+00:00 2007 (Java Time: 1168532051021)
    Web Dynpro Code Generation Infos
    sap.com/pcui_gp~xssutils
    SapDictionaryGenerationCore 6.4018.00.0000.20060530191647.0000 (release=630_REL, buildtime=2006-09-20:21:03:45[UTC], changelist=405154, host=PWDFM027.wdf.sap.corp)
    SapDictionaryGenerationTemplates 6.4018.00.0000.20060530191647.0000 (release=630_REL, buildtime=2006-09-20:21:03:57[UTC], changelist=405154, host=PWDFM027.wdf.sap.corp)
    SapGenerationFrameworkCore 6.4015.00.0000.20050818152155.0000 (release=630_VAL_REL, buildtime=2005-11-24:21:18:08[UTC], changelist=363812, host=PWDFM026.wdf.sap.corp)
    SapIdeWebDynproCheckLayer 6.4018.00.0000.20060823112633.0000 (release=630_REL, buildtime=2006-09-20:21:14:40[UTC], changelist=415262, host=PWDFM027.wdf.sap.corp)
    SapMetamodelCommon 6.4018.00.0000.20060302125746.0000 (release=630_REL, buildtime=2006-09-20:20:56:46[UTC], changelist=392271, host=PWDFM027.wdf.sap.corp)
    SapMetamodelCore 6.4018.00.0000.20060302125746.0000 (release=630_REL, buildtime=2006-09-20:20:56:36[UTC], changelist=392271, host=PWDFM027.wdf.sap.corp)
    SapMetamodelDictionary 6.4018.00.0000.20060302125547.0000 (release=630_REL, buildtime=2006-09-20:21:00:39[UTC], changelist=392265, host=PWDFM027.wdf.sap.corp)
    SapMetamodelWebDynpro 6.4018.00.0000.20060823112248.0000 (release=630_REL, buildtime=2006-09-20:21:09:40[UTC], changelist=415252, host=PWDFM027.wdf.sap.corp)
    SapWebDynproGenerationCTemplates 6.4018.00.0000.20060915154217.0000 (release=630_REL, buildtime=2006-09-20:21:52:30[UTC], changelist=417774, host=PWDFM027)
    SapWebDynproGenerationCore 6.4018.00.0000.20060823112633.0000 (release=630_REL, buildtime=2006-09-20:21:15:10[UTC], changelist=415262, host=PWDFM027.wdf.sap.corp)
    SapWebDynproGenerationTemplates 6.4018.00.0000.20060915154217.0000 (release=630_REL, buildtime=2006-09-20:21:52:30[UTC], changelist=417774, host=PWDFM027)
    sap.com/tcwddispwda
    No information available
    sap.com/pcui_gp~xssfpm
    SapDictionaryGenerationCore 6.4018.00.0000.20060530191647.0000 (release=630_REL, buildtime=2006-09-20:21:03:45[UTC], changelist=405154, host=PWDFM027.wdf.sap.corp)
    SapDictionaryGenerationTemplates 6.4018.00.0000.20060530191647.0000 (release=630_REL, buildtime=2006-09-20:21:03:57[UTC], changelist=405154, host=PWDFM027.wdf.sap.corp)
    SapGenerationFrameworkCore 6.4015.00.0000.20050818152155.0000 (release=630_VAL_REL, buildtime=2005-11-24:21:18:08[UTC], changelist=363812, host=PWDFM026.wdf.sap.corp)
    SapIdeWebDynproCheckLayer 6.4018.00.0000.20060823112633.0000 (release=630_REL, buildtime=2006-09-20:21:14:40[UTC], changelist=415262, host=PWDFM027.wdf.sap.corp)
    SapMetamodelCommon 6.4018.00.0000.20060302125746.0000 (release=630_REL, buildtime=2006-09-20:20:56:46[UTC], changelist=392271, host=PWDFM027.wdf.sap.corp)
    SapMetamodelCore 6.4018.00.0000.20060302125746.0000 (release=630_REL, buildtime=2006-09-20:20:56:36[UTC], changelist=392271, host=PWDFM027.wdf.sap.corp)
    SapMetamodelDictionary 6.4018.00.0000.20060302125547.0000 (release=630_REL, buildtime=2006-09-20:21:00:39[UTC], changelist=392265, host=PWDFM027.wdf.sap.corp)
    SapMetamodelWebDynpro 6.4018.00.0000.20060823112248.0000 (release=630_REL, buildtime=2006-09-20:21:09:40[UTC], changelist=415252, host=PWDFM027.wdf.sap.corp)
    SapWebDynproGenerationCTemplates 6.4018.00.0000.20060915154217.0000 (release=630_REL, buildtime=2006-09-20:21:52:30[UTC], changelist=417774, host=PWDFM027)
    SapWebDynproGenerationCore 6.4018.00.0000.20060823112633.0000 (release=630_REL, buildtime=2006-09-20:21:15:10[UTC], changelist=415262, host=PWDFM027.wdf.sap.corp)
    SapWebDynproGenerationTemplates 6.4018.00.0000.20060915154217.0000 (release=630_REL, buildtime=2006-09-20:21:52:30[UTC], changelist=417774, host=PWDFM027)
    sap.com/tcwdcorecomp
    No information available
    Detailed Error Information
    Detailed Exception Chain
    com.sap.tc.webdynpro.services.exceptions.WDTypeNotFoundException: type com.sap.xss.ser.xssmenu.model.types.P_Pernr could not be loaded: com.sap.dictionary.runtime.DdException: Type com.sap.xss.ser.xssmenu.model.types.P_Pernr does not exist
    at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker.getSimpleType(DataTypeBroker.java:250)
    at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker.getDataType(DataTypeBroker.java:213)
    at com.sap.tc.webdynpro.progmodel.context.DataAttributeInfo.init(DataAttributeInfo.java:314)
    at com.sap.tc.webdynpro.progmodel.context.NodeInfo.initAttributes(NodeInfo.java:669)
    at com.sap.tc.webdynpro.progmodel.context.DataNodeInfo.doInit(DataNodeInfo.java:233)
    at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:654)
    at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:657)
    at com.sap.tc.webdynpro.progmodel.context.Context.init(Context.java:40)
    at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:199)
    at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:347)
    at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.createComponent(ClientComponent.java:855)
    at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.createComponent(ClientComponent.java:158)
    at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.createComponentInternal(ComponentUsage.java:143)
    at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.createComponent(ComponentUsage.java:135)
    at com.sap.pcuigp.xssfpm.wd.FPMComponent$ComponentUsageManager.createBLCComponentUsage(FPMComponent.java:628)
    at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:773)
    at com.sap.xss.ser.xssmenu.vc.header.VcXssMenuHeader.onInit(VcXssMenuHeader.java:196)
    at com.sap.xss.ser.xssmenu.vc.header.wdp.InternalVcXssMenuHeader.onInit(InternalVcXssMenuHeader.java:225)
    at com.sap.xss.ser.xssmenu.vc.header.VcXssMenuHeaderInterface.onInit(VcXssMenuHeaderInterface.java:162)
    at com.sap.xss.ser.xssmenu.vc.header.wdp.InternalVcXssMenuHeaderInterface.onInit(InternalVcXssMenuHeaderInterface.java:144)
    at com.sap.xss.ser.xssmenu.vc.header.wdp.InternalVcXssMenuHeaderInterface$External.onInit(InternalVcXssMenuHeaderInterface.java:220)
    at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:466)
    at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:354)
    at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:179)
    at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
    at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:95)
    at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
    at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
    at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:347)
    at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:370)
    at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:608)
    at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59)
    at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:248)
    at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154)
    at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116)
    at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:55)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code))
    at java.security.AccessController.doPrivileged1(Native Method)
    at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code))
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code))
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code))
    Caused by: com.sap.dictionary.runtime.DdException: Type com.sap.xss.ser.xssmenu.model.types.P_Pernr does not exist
    at com.sap.dictionary.types.mdi.util.ProviderUtil.createAbapTypeXmlMap(ProviderUtil.java:400)
    at com.sap.dictionary.runtime.mdi.DataProvider.createSimpleTypeFromAbapType(DataProvider.java:586)
    at com.sap.dictionary.runtime.mdi.DataProvider.getDataType(DataProvider.java:286)
    at com.sap.dictionary.runtime.DdDictionary.getDataType(DdDictionary.java:95)
    at com.sap.dictionary.runtime.DdBroker.getDataType(DdBroker.java:164)
    at com.sap.dictionary.runtime.DdBroker.getSimpleType(DdBroker.java:170)
    at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker.getSimpleType(DataTypeBroker.java:242)
    ... 52 more

    Hi,
    uhm... good question, long time ago...
    Error should be in the JCO-Destinations, where you can choose a targetsystem for each Jco-Destination.
    Since them we installed a java on the abap-system, so we have a doublestack.
    In the Jco Destiantions must be the ABAP-System.
    Application via SAPTicket and MetaData via fix User like DDIC.
    Regards
    Christian

  • Error in Source System, Time series does not exist

    Hi Guys,
    I am loading the data from APO system and i am getting the below error after scheduling the info Packs.. can you analyze and let me know your suggestions
    Error Message : Time series does not exist,
    Error in Source System
    I have pasted the ststus message below
    Diagnosis
    An error occurred in the source system.
    System Response
    Caller 09 contains an error message.
    Further analysis:
    The error occurred in Extractor .
    Refer to the error message.
    Procedure
    How you remove the error depends on the error message.
    Note
    If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
    Thanks,
    YJ

    Hi,
    You better search for the notes with the message ""Time series does not exist". You will get nearly 18 notes. Go through each note and see the relevence to your problem and do the needful as it is mentioned in the note .
    Few notes are:
    528028,542946,367951,391403,362386.
    With rgds,
    Anil Kumar Sharma .P

  • Time series does not exist, Error in Source System

    Hi friends,
    I am loading the data from APO system and i am getting the below error after scheduling the info Packs.. can you analyze and let me know your suggestions
    Error Message : Time series does not exist,
                             Error in Source System
    I have pasted the ststus message below
    Diagnosis
    An error occurred in the source system.
    System Response
    Caller 09 contains an error message.
    Further analysis:
    The error occurred in Extractor .
    Refer to the error message.
    Procedure
    How you remove the error depends on the error message.
    Note
    If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
    Thanks,
    YJ

    Hi,
    You better search for the notes with the message ""Time series does not exist". You will get nearly 18 notes. Go through each note and see the relevence to your problem and do the needful as it is mentioned in the note .
    Few notes are:
    528028,542946,367951,391403,362386.
    With rgds,
    Anil Kumar Sharma .P

  • Error Entry does not exist in J_1BNFITMRULE (check entry) Nfe 10 Incomig

    Bom dia pessoal.
    Ao tentar executar um dos passos no cenário de compras normais, (Assign Purchase Order), o seguinte erro ocorreu
    Entry does not exist in J_1BNFITMRULE (check entry).
    Detalhe: Para o mesmo pedido ja havia sido efetuada 3 entradas via monitor sem qualquer erro.
    Qualquer ajuda será muito bem vinda.
    At
    Pedro L Nobrega
    Pessoal
    Ja descobri o que aconteceu, na categoria de nota fiscal, retiraram tipo de item da categoria que estava sendo utilizada.
    (Projeto global).... acontece.
    Para evitar este tipo de problema novamente criei uma categoria especifica para o Incoming. (Compras Normais.)
    Erro corrigido.
    Abs
    Pedro L Nobrega
    Edited by: Pedro Luiz Nobrega on Jan 25, 2012 3:56 PM

    Resolvido
    Criamos uma categoria especifica para nfe incoming (Compras Normais), para que não ocorra novamente o erro,
    a nota que estava sendo utilizada tinha na configuração tipo de item que foi retirado o gerou o erro.
    Grato
    Pedro L Nobrega

  • Error on start: Path does not exist: /Library/Audio/Apple Loops Index

    I get the error "Path does not exist: /Library/Audio/Apple Loops Index
    Without this directory you can not use the LoopBrowser. Please make sure this directory exists" when starting Garage Band. I also cannot use the onscreen keyboard, or musical typing in GarageBand. All other sounds work fine.
    The only thing that changed since I last used GB was that I installed Leopard. (and that was a while ago, so I thought all was well and got rid of my last Tiger backup. )
    Any suggestions?
    Thanks!

    Another update: I tried to reinstall garage band from the disks that came with my mac, but got the error:
    "Install Failed
    Unable to Install
    The Installer could not install the software because there was no software found to install."
    The following errors appeared in Console:
    4/7/08 4/7/08 9:50:08 PM kernel SAM Multimedia: READ or WRITE failed, SENSE_KEY = 0x03, ASC = 0x11, ASCQ = 0x00
    4/7/08 4/7/08 9:50:09 PM kernel SAM Multimedia: READ or WRITE failed, SENSE_KEY = 0x03, ASC = 0x11, ASCQ = 0x00
    4/7/08 4/7/08 9:50:09 PM kernel disk2s3: I/O error.
    4/7/08 4/7/08 9:50:10 PM Installer[519] -[IFPkg(InfoConversionPrivate) _parseOldStyleForLanguage:] - can't find .info file (GarageBand)
    4/7/08 4/7/08 9:50:10 PM Installer[519] The package "GarageBand" could not be opened. This can happen if the package has incorrect permissions or if the package has been renamed.
    4/7/08 4/7/08 9:50:10 PM Installer[519] PFPackage::packageWithURL - can't instantiate package: /Volumes/Mac OS X Install Disc 2/Packages/GarageBand.mpkg/Contents/Installers/GarageBand.pkg
    Any ideas?
    Thanks!

  • Root device mounted successfully, but /sbin/init does not exist ???

    I'm having the issue where when I boot after doing a fresh install, it gives me:
    ERROR: Root device mounted successfully, but /sbin/init does not exist
    Bailing out, you are on your own. Good luck
    sh: can't access tty; job control turned off
    [rootfs /]#
    My fstab:
    # /etc/fstab
    # <file system> <dir> <type> <options> <dump> <pass>
    # /dev/sda1 LABEL=homerroot
    UUID=877deab9-624d-4e1d-90a1-ccc1d6ebc0c6 / ext4 rw,relatime,data=ordered 0 1
    # /dev/sda2 LABEL=homerboot
    UUID=77835da5-8a38-44c1-bf27-bb657df4484b /boot ext4 rw,relatime,data=ordered 0 2
    # /dev/sda3 LABEL=homeretc
    UUID=8a1b5bd8-b147-41e0-87df-70a4a9e12df2 /etc ext4 rw,relatime,data=ordered 0 2
    # /dev/sda4 LABEL=homervar
    UUID=8eb2e7b1-cdf1-46ce-9dc1-439d002bfae4 /var ext4 rw,relatime,data=ordered 0 2
    # /dev/sda5 LABEL=homerusr
    UUID=bce162b4-d27f-450c-a0e6-4d3ebc6242dc /usr ext4 rw,relatime,data=ordered 0 2
    # /dev/sda6 LABEL=home
    UUID=62de76ab-b6d4-4e3d-a423-c287b81813a9 /home ext4 rw,relatime,data=ordered 0 2
    # /dev/sda7 LABEL=public
    UUID=d98a9c8e-2301-4e66-8c7f-26167633a4b0 /public ext4 rw,relatime,data=ordered 0 2
    This looks fine to me, but when /dev/sda1 is mounted at /new_root, none of the other devices are mounted....
    I don't know if this is what's causing the problem since /etc, and /usr are on separate partitions from root, but
    this would be the first time I get a problem dividing things this way (on ubuntu, mint, fedora, et cetera).
    So I tried:
    https://bbs.archlinux.org/viewtopic.php … 3#p1283343
    I get "* is owned by filesystem 2013.05-2" for all three dirs from step three.
    None of the other steps have any effect....
    I also tried:
    https://bbs.archlinux.org/viewtopic.php?id=172943
    My /dev/sda1 mounts to new_root, so I don't think I'm having his problem.
    And:
    https://bbs.archlinux.org/viewtopic.php?id=166423
    I reinstalled systemd-sysvcompat, and I'm sure that's not my problem.
    Interestingly enough, /usr/lib/systemd/systemd is an elf file on my target hard disk.
    Is this an outdated issue or something? Or should /usr/lib/systemd/systemd be a text file?
    Thanks in advance for your help guys!

    WorMzy wrote:Oh, and /usr/lib/systemd/systemd is supposed to be an ELF binary. Not sure why you think it should be a text file.
    I saw another thread saying that adding an entry there would help. I think it was "init=<something>".
    WonderWoofy wrote:A separate /etc is not supported whatsoever.  There needs to be initial access to a few things there.  I'm sure it could be made to work with some initramfs hackery.  But it is neither supported or wise to do so IMO.
    I'll not do the separate partitions then. Thanks. I'll check back if it works/doesn't-works.

  • [nQSError: 59014] The  requested column does not exist in this table.

    Hi
    As you know this error has been discussed in other threads.. the difference in mine is that not only the time series measures but all the columns are giving me the error...none of the columns are being displayed... The rpd has no consistency errors. can anyone suggest what may be going on?
    Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 59014] The requested column does not exist in this table. (HY000)
    SQL Issued: SELECT column1 saw_0 FROM Paint3 ORDER BY saw_0
    Thank you
    mm58

    I guess you have the column in RPD, and it is available for queries.
    are you using any time measures? if so check you chronological keys.

  • Error message: local root folder does not exist

    Greetings,
    I'm working on a MacPro 2x2.66Ghz, running DW from CS2 and
    through a strange combination of keyboard keystrokes while cleaning
    my keyboard yesterday I inadvertantly renamed my hard drive "-OX"
    from it's default. I can't seem to remember what the default name
    of my hard drive was, but i think it was simply "Macintosh". I've
    renamed it that, but on launching DW for the first time today I got
    an error message saying that "The local root folder, web_content,
    does not exist" and it gave me the option to manage sites and set
    my local root folder again. Is there a way to re-establish my local
    root folder for every site that I currently manage in one swipe, or
    do I have to go in and manually do this for each and every Site
    within my Files panel?
    Thanks for your ideas,
    Pedro

    Actually, it solved one issue but seems to have created
    another! So, at least now my Sites are all working okay with
    respect to a local root folder. But let's say I open an .html file
    by double-clicking it in the Files panel. With that file active if
    I choose Preview in Browser I get a "File Not Found" error message
    from Firefox.... even though it looks like the path to that file is
    correct.
    One thing I notice about the path in the address bar of
    Firefox is that there are 3 forward-slashes after the file: bit at
    the beginning of the line.
    For example, the page generating the error has this address:
    file:///Macintosh%20HD/Users/peter/Sites/MySite/web_content/index_vertical.html
    If you notice carefully there are 3 slashes at the beginning
    of the line. If I go to "Manage Sites" I have the settings set to
    "links relative to document" and my root folder and images folder
    show the proper locations. What have I done?
    The error message also says the following in the details
    section: Firefox can't find the file at /Macintosh
    HD/Users/peter/Sites/MySite/web_content/index_vertical.html.
    so there's a forward-slash before the hard drive.... is that
    okay?
    Thanks for your ideas!
    Pedro

  • Error when opening indd-file: Either the file does not exist, you do not have permission, or the...

    Hi! I'm having trouble opening a indd-file. It was sent to me as a zip-fil along with the used fonts and links. When I try to open the file, I'm getting this error: "Either the file does not exist, you do not have permission, or the file may be in use by another application". I've tried to look up this error both here in these forums and through google, but can't find a similar case. Hope someone can help me with this. Please let me know if you need more information/details, and I'll provide. Thanks!

    function(){return A.apply(null,[this].concat($A(arguments)))}
    I'm suspecting it to come from a mac user, if that could influence the case...
    It does come from a Mac, as is proven by the fonts, which are of no use on my Windows machine, but that doesn't prevent my CS4 to open it without any problem. It seems to me it's a perfectly regular CS2 file.
    Just for cheers I set the file to Read-only, but my InDesign opens it regardless (again as a copy, because it's a "converted" file).
    Could it be something in your environment? No network read/write privileges, insufficient free hard disk space, stuff like that?

  • Package javax.servlet does not exist - settings appear to be correct

    laugh as I write this post...it's hardly a "new topic."...but everything seems set just as it should be...
    Okay...I'm a seasoned programmer in every language but JAVA. Here's the issue...every time I try to use the Core Servlets book/website by Marty Hall and Larry Brown I get hung up on the packages. This time, I downloaded and followed step by step what the website said to do...it was even preconfigured for me! Alas...I am getting the following compliation errors on a "simple packagless" program with NetBeans:
    Compiling 1 source file to C:\Servlets+JSP\HelloServlet\build\classes
    C:\Servlets+JSP\HelloServlet\src\helloservlet\HelloServlet.java:2: package javax.servlet does not exist
    import javax.servlet.*;
    C:\Servlets+JSP\HelloServlet\src\helloservlet\HelloServlet.java:3: package javax.servlet.http does not exist
    import javax.servlet.http.*;
    C:\Servlets+JSP\HelloServlet\src\helloservlet\HelloServlet.java:13: cannot find symbol
    symbol: class HttpServlet
    public class HelloServlet extends HttpServlet {
    C:\Servlets+JSP\HelloServlet\src\helloservlet\HelloServlet.java:14: cannot find symbol
    symbol : class HttpServletRequest
    location: class HelloServlet
    public void doGet(HttpServletRequest request,
    C:\Servlets+JSP\HelloServlet\src\helloservlet\HelloServlet.java:15: cannot find symbol
    symbol : class HttpServletResponse
    location: class HelloServlet
    HttpServletResponse response)
    C:\Servlets+JSP\HelloServlet\src\helloservlet\HelloServlet.java:16: cannot find symbol
    symbol : class ServletException
    location: class HelloServlet
    throws ServletException, IOException {
    6 errors
    BUILD FAILED (total time: 0 seconds)
    These are my environment settings (note that the JAVAX package is located under the src folder in Java)
    Catalina Home:
    C:\apache-tomcat-6.0.10
    CLASSPATH:
    C:\apache-tomcat-6.0.10\lib\servlet-api.jar;
    C:\apache-tomcat-6.0.10\lib\jsp-api.jar;
    C:\apache-tomcat-6.0.10\lib\el-api.jar;
    C:\Servlets+JSP;..;..\..;
    C:\Program Files\Java\jdk1.6.0_03\src
    JAVA_HOME
    C:\Program Files\Java\jdk1.6.0_03
    Path:
    C:\Program Files\Java\jdk1.6.0_03\bin;%PATH%
    Any ideas (excluding the one that maybe I should let my hair grow out, put on some tackey shorts and sandles and start palying an instrument in the streets of Austin for living?)

    cabkats wrote:
    You are then suggesting that I make the corrections directly to the files in apache using notepad instead of using the envir. variables?No I am not suggesting that. I am suggesting that you need to read the documentation about the product(s) and set them up the way they require, rather than blindly think that the CLASSPATH environment variable is some magical entity.
    I will try this, but I was hoping that since my IDE auto configured (with exception to java_home) that I would not have to do this. I wil give it try....thanks for the suggestion.See, you're using an IDE. Like I mentioned, IDEs do not use the CLASSPATH environment variable. You need to set up your project in your IDE in such a way that it knows what the dependent jars are. I'm sure there's a way to add jars to your project's dependencies.

Maybe you are looking for