Hard Disk attached to my Airport Extreme

I have connected my WD My Book to my AE. AE recognizes it and shows it in the Airport Utility. After making the appropriate selection I try to update the Airport Utility it shows error -6772. I cannot find an explaination of this error, nor am I able to Map the network drive so it shows in My Computer.
I have been struggling with this problem for several days and cannot find what is wrong.
Does anyone have any ideas?

Hello,
Problem is likely the Format of the External drive, for TM it needs to be Mac OSX extended Journaled & GUID Partition scheme for Intel based Macs...
How to format your disks...
http://www.kenstone.net/fcp_homepage/partitioning_tiger.html
(To Install OSX on an IntelMac the Drive it needs the GUID Partitioning scheme mentioned at the bottom.)
Thanks to Pondini, Formatting, Partitioning, Verifying, and Repairing Disks...
http://Pondini.org/OSX/DU.html
There are other free options for backing up if interested!

Similar Messages

Make a hard drive attached to the Airport Extreme work with Time Capsule?

I have an external hard drive attached to my airport extreme that shows up on my desktop as if it was attached locally, but time machine recognizes it as the wrong format. In the Get Info screen, the drive's format appears to be 'Appleshare', when it is actually Mac OS Extended (Journaled). How can I make it appear as Mac OS extended again?

There is nothing wrong. The drive will appear as Appleshare since the AirPort Extreme base station (AEBS) is providing file sharing services. That should not be a problem for Time Machine use.

How do I access an external hard drive attached to an Airport Extreme using the Finder's "Go to the folder" feature?

How do I access an external hard drive attached to an Airport Extreme using the Finder's "Go to the folder" feature?
I have an external hard drive attached to my Airport Extreme and I can access it just fine through Finder. I would like to be able to keyboard navigate to it in an efficient manner. I tried to use the "Go to the folder" feature but was unable to.
I had tried dragging the drive to the Network folder but the shortcut it created does not lead to the drive's contents...it seems to lead right back to the parent directory:
I hope I explained the question well. Thank you for all of your help and time in tending to my inquiry.

Cant you set up "back to my mac" then go to finder preferences and put a check mark under everything under the shared location. Also set up back to my mac on your airport extreme.

Having problems seeing multiple hard drives attached to my Airport Extreme.

I just bought a refurbished Airport Extreme from Apple.com. I set it up and have been able to access my powered, 1 TB desktop hard drive, but when I attach a powered USB hub and two additional hard drives that are not powered (they're both portable, USB-powered drives), I'm usually only able to see my 1 TB desktop drive. When I can see them, it's only through the Airport Utility app and it says they're 0 mb drives. I'm never able to see them in Finder. I'm never able to drop anything onto either of the drives. Only the 1 TB drive. If anyone knows why and can help, I'd appreciate it. Thanks!

How are the portables formatted?
NTFS and ExFat are not supported: [AirPort Extreme (802.11n) and Time Capsule: USB storage device supported formats and protocols|http://support.apple.com/kb/HT2426].

Hard Disk stops working on Airport Extreme

I have moved my airport extreme from a "extend network' mode to "create network" mode and wanted to move my hard disk (which worked smoothly) with it. The Extreme is connected to Livebox (France) router in bridge mode. Now if I use my airport utility, the hard disk shows up under "disk" but is not clickable (it is also slightly faded). In Time machine preferences, the hard disk does not show up.
Can anyone help me?
Truly appreciate it.

Hi,
I have the same problem here.
3 disks on airport extreme over ethernet.
Worked like a charm with plex and back-up use.
Suddenly disks are not acceseble anymore or lost connection. Some folders on the disk open up instantly other folders give the spinning wheel...
What you said is maybe an eye opener: i've recently tried extending my wifi with an additional airport express. (without succes!)
Did you already found a sollution for this?
Thanx!

To share a hard disk connected to an Airport Extreme, does it have to be Apple-formatted?

The title says it all.

The AirPort Extreme will read and write to disks that are formatted in Mac OS Extended (Journaled) or FAT32.
As you know, FAT32 has a 4 GB limitation for any single given file size, so the Mac format would always be recommended.

VERY slow data transfer to my hard drive attached to the Airport Extreme

Hi
Ive got a Macbook Pro and Mac Pro. In order to access large files from both I got a 2TB drive connected to my Airport Extreme and it shows up fine in both Macs under SHARED.
When I copy files from and to that harddrive from my Macbook Pro its impressively fast. Seems as fast as a USB stick.
However when I try to do the same with my Mac Pro its extremely slow. A 1GB file takes about 15 minutes.
Are there any settings that I might have overlooked on the Mac Pro?
Thanks
Jorg

This won't be of any help for you , but I happen to have the exact same problem. My AEBs is linked to a LaCie external HD, my wireless network include a macmini aluminum, a Macbook Air, a MacBook Pro, a MacPro Dual-COre Intel 2.66 GHz. . Everything works fine expect for the MacPro which is painfully slow to get data to and from. The MacPro Airport Card is of the Airport Extreme type (0x14E4, 0x87), like my other macs…
I use WPA2 with a n protocol to connect to the base station.
Still at a loss about this issue, wonder how to solve it…

Where did my USB hard drive that's attached to my Airport Extreme router go

I have a USB hard drive attached to my Airport Extreme. I upgraded to OS X.5 and the drive disappeared. If I reboot to OS X.4.10 the drive reappears.
Does Leopard recognize USB drives connected to Airport routers? How can I get Leopard to recognize this drive?

Hello.
When you setup up your Airport you give a name and password to the base station. The base station name will show up in a Finder Window. My Finder window shows it between Devices and Places in an item called Shared.
When you click in your base station name it will refresh the window content and show a folder with the name of your HD connected to the Base Station. On the top part of the window you will see a dark gray bar and the status +*Connected as: Guest*+ and a button Connect As... . Click this button and select *Registered User* and *type your password* for the Base Station. If you wish you can select the *Remember this password in my keychain*. Now click Connect. You will see that the status in the dark gray bar shows +*Connected as: <your user name>*+.
Now remember that this HD is not a normal HD to Leopard, it is a Network HD, so it wisely shows it in the Shared item.
Now Apple understands that in the past this Network HD was shown to users as a Normal HD on the Desktop and this could generate some confusion, so they left a way for us to see it as in Tiger.
Click on the Desktop and you will the Finder menu bar, select Finder>Preferences and click on the item +*Connected servers*+ in the Show this items on the Desktop. This will do the trick.

Viewing files on a hard disk attached to airport extreme

I recently had issues with seeing a hard disk attached to airport extreme. The problem i had was that the hard disk had to be formatted in FAT-32 format which I did and fixed that problem. Now the data on that drive can not be accessed or modified from my PC ( windows 7) over the wireless network. When i look in my windows explorer the hard disk comes up on the network as airport drive Z and it has crosses in front of the files on the drive and a message that i do not have permission to access thes files. Any ideas would be appreciated in how to fix this. Thanks. darryl

Is there no way that time machine can delete the oldest back up when it becomes full?
Time Machine will automatically start to delete the oldest backups first to make room for new backups when the drive is full. It has worked this way since its introduction about 4 years ago.
The one thing that can throw this off is if the drive is near full, and you suddenly ask Time Machine to make a very large backup. Then, Time Machine can have problems, and you have to manually delete some older backups.
I thought about time capsule, but someone told me that it runs very hot and has no off switch.
Well, the Time Capsule is an AirPort Exreme in a larger case with a built in hard drive. My 4th Generation Time Capsule and 3rd Generation AirPort Extreme both run about the same, heat wise in my experience. If anything...the AirPort Extreme runs a bit warmer than the Time Capsule....if my hand is any kind of accurate indicator. And, as you know, the Airport Extreme does not have an "Off" switch either.
I spoke to a lady in the Apple store today about a bigger drive and asked her what will happen when it gets full. She suggested that then I get another one. Sounds pretty crazy to me!
Sounds like a salesperson....hoping that you will buy more stuff.

HT201250 Time machine back up using a external hard drive connected to the Airport extreme

How can I setup a time machine back up using a external hard drive connected to the Airport extreme? Even better for time managment purposes I want to use the Eithernet Thunderbolt connection for the first back up and then through the wifi there after for daily routine Time Machine back ups.

You can attach a hard drive, but Time Machine backups to a drive at the USB port at the AirPort Extreme are not supported by Apple, so it's not possible to say what your actual results might be.
If you decide to try this, it would be wise to have a secondary backup plan in place as well.
http://docs.info.apple.com/article.html?path=Mac/10.6/en/15139.html

Why can't I connect to my external hard drive anymore through my AirPort extreme?

I have a WD 500 GB external hard drive connected to my AirPort extreme that I have been using just fine for some time now. All of a sudden, I cannot access the files on the hard drive and when I try to connect to my AirPort in finder, the connection fails. What can I do to fix this?

If I restart my Mac it notices them
This is puzzling. You should not have to restart your Mac for drives to mount.
Also I plugged the hard drive directly into my Mac and had to restart it before it noticed it
Same as above. You should not have to restart the Mac for the drive to be recognized.
Connect the drive directly to the Mac and restart the Mac if necessary to mount the drive. Then run Verify Disk using Disk Utility on the Mac. If repairs are needed, run Repair Disk. Locate Disk Utility as follows:
Macintosh HD > Applications > Utilities > Disk Utility
See if the drive is recognized at the AirPort Extreme. Post on your results.

How do I use time machine to backup to an external hard drive plugged into my airport extreme

How do I use time machine to backup to an external hard drive plugged into my airport extreme? I used to be able to but now time machine will not recognize my hard drive to select as a backup when plugged into my airport extreme. I'm not sure what happened or changed. Any help is greatly appreciated. Thanks

First thing to do is go to the Pondini tips page, then follow the link to his full TM site for all the details.

External hard drive connected to my airport extreme will no longer open, when navigating to it in Finder, the Finder window quits and reopens, cannot access hard drive, it is visible in airport utility, since the problem began I have updated firmware

External hard drive connected to my airport extreme will no longer open, when navigating to it in Finder, the Finder window quits and reopens, cannot access hard drive, it is visible in airport utility, since the problem began I have updated firmware on Extreme as well as both of my Airport Expresses. Hard drive is USB connected to Extreme.

Reboot the USB drive.. assuming it is powered.. or unplug and replug a self-powered drive.. (you should not use self-powered drives on AE before the latest model.. always use a powered hub).
Does the drive now appear in finder..
If not reboot both drive and the AE.. it should now appear.
If it doesn't work with direct connection try a powered hub.. that can help.

HT201250 Can I use Time Machine to backup a LaCie Hard Drive connected to an Airport Extreme onto a My Book that is connected directly to a Mac Mini?

I have a LaCie 2TB hard drive connected to a Airport Extreme Base Station. I also have a 1TB MyBook connected to a Mac Mini. My question is can you backup selected files (photos) from the LaCie drive to the MyBook drive using Time Machine, or any other software? If it will cost a fortune, I guess I can always just copy the newer files over.

Thank you for such a lightning-fast response Niel :-) Can I just double check with you the following ...?
The external drive where my iPhoto library is located has three partitions - Time Machine Backup, Pictures (where the iPhoto library is located) and SuperDuper Bootable Clone.
When you say 'Remove the external drive from the list of items set to be excluded from the backup, and then add everything else on it' - am I correct in thinking that I should remove Pictures partition from the items to be excluded but leave the Time Machine Backup and SuperDuper Bootable Clone as excluded items?
On my 2TB external drive (the one I'm backing up to) there are 5 partitions - Time Machine Backup, SuperDuper Clone, Pictures, Photo Archive and Document Archive. The Time Machine Backup is 700GB of which I still have 473GB available - when I include the Pictures folder that contains the iPhoto library that will use up another 148GB but I think there's still plenty of room to use it.
When you say if the partition contain the iPhoto library isn't dedicated to it it may be easier to create one which is, the only item I have on the Pictures volume is the iPhoto library so I think that it's dedicated to it. I was going to add images from the Pictures folder on my MacBook Pro but haven't done so at this stage so I won't do so. It wouldn't matter though, would it, if I copied the images from the Pictures folder on my MBP to the 'Photo Archive' partition of the EHD?
Thank you once more for your reply.
Tricia

Saving files to a hard drive connected to my Airport Extreme

I just upgraded to Leopard. I am unable to use Backup v 3.1.2 to save files to a hard drive i have connected to my Airport Extreme. Previously, using Tiger i was able to perform this task.
I use Finder and see my airport express network and my external hard drive. However, when i run my backup jobs using Backup the program can not located the external hard drives.

The discussion was helpful. My hard drive connected to my Airport Extreme is now recognized and i can backup files to a folder called 'Backups'. However, i am only capable of saving to this one folder. When i try to create subfolders and select one of them as my location in the Backup program i get an error message; "the selected location is not a valid destination". Any idea how to get around this problem?
Many thanks for the quick response to my previous mail.

Hard Disk attached to my Airport Extreme

Similar Messages

Maybe you are looking for