Hard disk drive doesn't appear on home screen

I have a external hard disk drive in NTFS. I have there a lot of data I need to transfer to my new Mac, so I can't erase nothing from there. I installed MacFUSE and Paragon 9 to correct the issue, but after that, the drive just didn't appear anymore on the home screen. It is in Disk utility (in grey color), but I can't mount it and the Fix Disk doesn't help at all. So now I have hard disk drive that doesn't appear to even exist, even the system can find it.
Can anyone say anything constructive?

Look on the other screens (swipe left). If desired, move it to the first screen.
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

Similar Messages

Intel Xserve will NOT boot from hard disk drive

I have two Intel Xserves 2.0 QC machines
I have tried to re-install version 10.4.11 OS (don't ask) onto a Hard disk drive that is in a Disk drive caddy and inserted in the machine.
When booting from The installation DVD media
The disk is seen by the "Disk Utility" (the disk is partitioned as GUID boot) and the installation proceeds to the disk.
Once the first pass of the installation is complete and the system reboots, the system shows the folder and ? mark.
If I boot and hold "ALT" key to view all avaialble boot options the Hard Disk Drive does NOT appear as valid boot disk.
It does show, the still inserted Installation DVD.
I CAN boot from an external firewire drive and the Hard disk drive is visible to the OS once logged in.
I have tried different caddy postions (left, middle and right)
I have tried bona fide Apple supplied Disk drives
I have tried various different caddies
I have tried installing Operating System 10.5.* and 10.6.8 server
I have run SMC reset and system reset
But still I cannot boot off from any Hard Disk Drive inserted in a caddy at the front of the system.
Has anyone seen this behaviour?
Is it fixable?
Do I have replace something like the Hard Disk Drive back plane circuit board? Or even the main logic board?
I have now run out of ideas and cannot find any help in discussions or just googling.
ANY help would be very appreciated
Regards
Tony

Antonio Hi !
QC = Quad core or QX as it is written on the "pull out" serial number tab at rear of system
I have 3 late 2006 Intel xserves
On my intial posting I declared 2 were 2.0 machines - when I was trying to be concise
2 of the macines are 2.66 systems and 1 is 2.0 system - all are QX machines
the 2.0 and 1 of the 2.66 will NOT boot from the ADM and disk inside the system - whereas the other 2.66 system will.
I have many different Caddies and these have different product/model number labels
603-9965
603-9545
603-9796
these are marked "intel SATA"
The 80Gb was only one of the drives tested - I have used Seagate 400Gb 750Gb and 1Tb - all of which have been used in systems at one time or another
and as I said the drives ARE visible once the operating system (either installation DVD or external firewire are booted from) - they are just NOT visible when the system is searching for boot media.
Thanks for the guide - I will look through that and continue to try and find an answer

Hi there! yesterday I installed Mavericks on my Macbook. Since then, it doesn't mount my external hard disk drive anymore, which he did a week ago (without the update). Is there anyone out there who knows a solution?

Hi there! Yesterday, I installed Mavericks on my Macbook. Since then, it doesn't recognize my external hard disk drive anymore (at least not on the desktop. In Germany they call it "it doens't mount it". I don't know if it's the same expression in english?)
I just used it a week ago, before I did the update and it worked perfectly fine.
Is there anyone out there who knows a solution for this problem? I've been googleing for hours now and can't find any answer.
Thank you!!!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

HT3275 When I press "select backup location" in the Time Machine section of System Preferences, my external hard drive doesn't appear as an option. How do I change this?

When I press "select backup location" in the Time Machine section of System Preferences, my external hard drive doesn't appear as an option. How do I change this? My external hard drive is a FreeAgent GoFlex Drive.

Hi, what Format is the external Drive?
They usually come PC Formatted for Fat32/MSdos, or NTFS... is there anything on it now?
How to format your disks...
http://www.kenstone.net/fcp_homepage/partitioning_tiger.html
(To Install OSX on an IntelMac the Drive it needs the GUID Partitioning scheme mentioned at the bottom.)
Thanks to Pondini, Formatting, Partitioning, Verifying, and Repairing Disks...
http://Pondini.org/OSX/DU.html

External Hard Drive doesn't appear!

Hey guys,
Wondered if you could help me out with this problem.
I have a Maxtor One Touch III drive and when I plug it in it doesn't appear on the screen. I go to disk utility and can't find it there either.
However, when I plug it into other computers - mac, p.c. etc it shows up.
Initially it did work for me but then mysteriously this problem surfaced..
I've called Seagate/Maxtor and still no luck...
Any idea of what I can try?
Duane Gibson

One option is to connect it through a powered USB hub. The additional power the drive will get from the hub may make all the difference.

HT4889 Migration Assistant to update my new Mountain Lion iMac from an external USB hard disk drive, it is constantly saying that it is "looking for other computers". It doesn't find the external drive. Why is it looking for other computers?

I'm trying to use Migration Assistant to update my new Mountain Lion iMac from an external USB hard disk drive. I told it to look for a drive, yet it is constantly saying that it is "looking for other computers". It doesn't find the external drive ... it just endlessly looks for other computers. Why is it looking for other computers at all, when I told it not to?

Wow, the wording in Migration Assistant is misleading. I've never used it before, so I thought I would try to copy my files from the external drive ... my old iMac died, but I managed to get everything I need off it, using the 'cp' command in single-user mode. So I guess I'll just have to manually copy the files from the external drive to the new machine. I was hoping that Migration Assistant might help somehow, but obviously not.
Thanks for the quick reply!

I have a MacBook Pro, 10.10.2 Yosemite. My external hard drive no longer appears on my screen or in Time Machine

I have a MacBook Pro, 10.10.2 Yosemite. My external hard drive no longer appears on my screen or in Time Machine. I have gone into Disc Utility to repair disc, and get the message: Error: Partition map check failed because no slices were found. I was trying to follow Melophage's instructions by going into "Terminal" and entering "diskutil list; diskutil cs list; mount" and "diskutil info disk2." Then I entered the command "sudo got show disk1."   I am sure I have made the problem worse. Can you give me some help? Thank you. blelambert
Last login: Wed Mar 11 19:23:03 on ttys000
~ belambert$ diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *251.0 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:          Apple_CoreStorage                         250.1 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                  Apple_HFS Macintosh HD           *249.8 GB   disk1
                                 Logical Volume on disk0s2
                                 7A998EAE-68FB-4BAC-BF40-7A31D2806B2C
                                 Unlocked Encrypted
/dev/disk2
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *2.0 TB     disk2
   1:         Microsoft Reserved                         134.2 MB   disk2s1
~ belambert$ diskutil cs list
CoreStorage logical volume groups (1 found)
|
+-- Logical Volume Group 883A56F4-5559-4872-A8DA-960F99655B63
    =========================================================
    Name:         Macintosh HD
Status:       Online
    Size:         250140434432 B (250.1 GB)
    Free Space:   8921088 B (8.9 MB)
    |
    +-< Physical Volume 7EDAFA20-FF9A-45FB-BA44-6526BB46C381
    |   ----------------------------------------------------
    |   Index:    0
    |   Disk:     disk0s2
    |   Status:   Online
    |   Size:     250140434432 B (250.1 GB)
    |
    +-> Logical Volume Family B47B0B40-CBF2-4D02-BFEF-182061AC6F8E
        Encryption Status:       Unlocked
        Encryption Type:         AES-XTS
        Conversion Status:       Complete
        Conversion Direction:    -none-
        Has Encrypted Extents:   Yes
        Fully Secure:            Yes
        Passphrase Required:     Yes
        |
        +-> Logical Volume 7A998EAE-68FB-4BAC-BF40-7A31D2806B2C
            Disk:                  disk1
            Status:                Online
            Size (Total):          249779191808 B (249.8 GB)
            Conversion Progress:   -none-
            Revertible:            Yes (unlock and decryption required)
            LV Name:               Macintosh HD
            Volume Name:           Macintosh HD
            Content Hint:          Apple_HFS
~ belambert$ mount
/dev/disk1 on / (hfs, local, journaled)
devfs on /dev (devfs, local, nobrowse)
map -hosts on /net (autofs, nosuid, automounted, nobrowse)
map auto_home on /home (autofs, automounted, nobrowse)
localhost:/vB3z604U-dvSpES6320fHq on /Volumes/MobileBackups (mtmfs, nosuid, read-only, nobrowse)
~ belambert$ diskutil info disk2
   Device Identifier:        disk2
   Device Node:              /dev/disk2
   Part of Whole:            disk2
   Device / Media Name:      WD My Book 111A Media
File System:              None
   Content (IOContent):      GUID_partition_scheme
   OS Can Be Installed:      No
   Media Type:               Generic
   Protocol:                 USB
   SMART Status:             Not Supported
   Total Size:               2.0 TB (2000365289472 Bytes) (exactly 3906963456 512-Byte-Units)
   Volume Free Space:        Not applicable (no file system)
   Device Block Size:        512 Bytes
   Read-Only Media:          No
   Read-Only Volume:         Not applicable (no file system)
   Ejectable:                Yes
File System:              None
   Content (IOContent):      GUID_partition_scheme
   OS Can Be Installed:      No
   Media Type:               Generic
   Protocol:                 USB
   SMART Status:             Not Supported
   Total Size:               2.0 TB (2000365289472 Bytes) (exactly 3906963456 512-Byte-Units)
   Volume Free Space:        Not applicable (no file system)
   Device Block Size:        512 Bytes
   Read-Only Media:          No
   Read-Only Volume:         Not applicable (no file system)
   Ejectable:                Yes
belambert ttys000                   Wed Mar 11 17:34 - 17:39 (00:05)
belambert ttys000                   Wed Mar 11 17:33 - 17:34 (00:00)
wtmp begins Sun Mar 8 14:40
~ belambert$ ~ belambert$ diskutil list
-bash: :~: command not found
~ belambert$ /dev/disk0
-bash: /dev/disk0: Permission denied
:~ belambert$    #:                       TYPE NAME                    SIZE       IDENTIFIER
~ belambert$    0:      GUID_partition_scheme                        *251.0 GB   disk0
-bash: 0:: command not found
:~ belambert$    1:                        EFI EFI                     209.7 MB   disk0s1
-bash: 1:: command not found
~ belambert$    2:          Apple_CoreStorage                         250.1 GB   disk0s2
-bash: 2:: command not found
~ belambert$    3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
-bash: /dev/disk1: Permission denied
~ belambert$    #:                       TYPE NAME                    SIZE       IDENTIFIER
~ belambert$    0:                  Apple_HFS Macintosh HD           *249.8 GB   disk1
-bash: 0:: command not found
~ belambert$                                  Logical Volume on disk0s2
-bash: Logical: command not found
~ belambert$                                  7A998EAE-68FB-4BAC-BF40-7A31D2806B2C
-bash: 7A998EAE-68FB-4BAC-BF40-7A31D2806B2C: command not found
~ belambert$                                  Unlocked Encrypted
-bash: Unlocked: command not found
:~ belambert$ /dev/disk2
-bash: /dev/disk2: Permission denied
~ belambert$    #:                       TYPE NAME                    SIZE       IDENTIFIER
:~ belambert$    0:      GUID_partition_scheme                        *2.0 TB     disk2
-bash: 0:: command not found
~ belambert$    1:         Microsoft Reserved                         134.2 MB   disk2s1
-bash: 1:: command not found
~ belambert$ ~ belambert$ diskutil cs list
-bash: ~: command not found
~ belambert$ CoreStorage logical volume groups (1 found)
-bash: syntax error near unexpected token `('
~ belambert$ |
-bash: syntax error near unexpected token `|'
~ belambert$ +-- Logical Volume Group 883A56F4-5559-4872-A8DA-960F99655B63
-bash: +--: command not found
~ belambert$     =========================================================
-bash: =========================================================: command not found
~ belambert$     Name:         Macintosh HD
-bash: Name:: command not found
~ belambert$
-bash: 3:: command not found
~ belambert$ /dev/disk1
   Whole:                    Yes
   Internal:                 No
   OS 9 Drivers:             No
   Low Level Format:         Not supported
:~ belambert$ Last login: Wed Mar 11 19:23:03 on ttys000
~ belambert$ diskutil list
   Whole:                    Yes
   Internal:                 No
   OS 9 Drivers:             No
   Low Level Format:         Not supported
~ belambert$ Last login: Wed Mar 11 19:23:03 on ttys000
~ belambert$ diskutil list
   Volume Name:              Not applicable (no file system)
   Mounted:                  Not applicable (no file system)

racergirl,
have you tried resetting your MacBook Pro’s System Management Controller, to see if that makes a difference with the heat?

Qosmio X500/00X System Recovery (Factory Reset) From Hard Disk Drive or Separate Disk

Hey Guys,
Looking for your advice and any links if any...cheers in advance
My Situation
In December 2009 I purchased a Toshiba Qosmio X500 - Model No. PQX33A-00X00J
At the time I upgraded my purchase from Toshiba Reseller BD4U, going from the standard 1x 500GB Sata drive + 1x 64GB SSD... to instead having 2x 500GB sata drives. I purchased with 3 year onsite next business day warranty, that is is now expired.
It came loaded with MS Win 7 Premium Home Edition - but no disks provided.
My Needs
I need/want to factory reset my PC - its starting to run slow
I need to re-partition from my existing 4x partitions to just having 2
The Issues
Possibly as a result of upgrading the disk drives at time of purchase, I don't believe I have a hidden Recovery partition in order to do a System Recovery from the Hard Disk Drive - see image of my current partitions attached
I don't have Win 7 OS installation disks or Toshiba Driver disks as they should have been installed by Toshiba
My Questions
Do You agree that I DONT have a Recovery Partition - when looking at the partition image? I'm confused on this point coz people say its hidden!?
Given I have no Toshiba Drivers Disk or Windows 7 OS disks - what should I do? I'm thinking of downloading Win 7 (use my product key from sticker under PC) and making a disk/USB (but need to learn how)
Is this where I get ALL necessary Toshiba drivers for my PC from?
Does Toshiba provide a link on its site and instructions on where to get Win 7 from so I can make a recover disk??
Notes
Tried to email Toshiba support but at step 1 of their email process validation failed due to my PC being out of warranty so will call them on Monday instead
THANK YOU THANK YOU, for any help you can give big ro small
Cheers
Rick

WOW, thanks Macius for that great, full and thorough reply...cheers mate
I suspected I didn't have a recovery partition - so thanks for confirming it as I planned to risk it and try! I guess it doesn't really matter why, and it would be futile to go and blame the re-seller or Toshiba at this late stage in the game in hopes they would help...
Yeah, I just went to Microsoft Software Recovery hoping to download Win 7 OS and create a recovery disk but of course Microsoft would NOT allow it due to it being software that was pre-installed on the device blah blah blah (see error image)
And I didn't bother back then in 2009 to create recovery media as you wisely descibed, mostly due to laziness and mentally putting it in the 'too hard basket'...I didn't really understand it - or much about computers at the time.
Re - your Option #2 - thanks for confirming Toshiba drivers. I could/can do this - but don't really want to buy something I already have, perhaps I'll check out ebay or see if a friend has a disk
Re - your Option #1 - I'm currently based in Vietnam and wont be back in Oz till late in the year, so will see if I can find a reliable Toshiba service provider here - but wont hold me breath on this one
I'm thinking that IF Option #1 is a No-Go then - maybe Plan B or Option #3 could be:
Do an Audit of Programs to identify those I don't need and can safely remove - then remove using Control Panel/ Remove Programs tool
Reformat all other drives (not C:// where OS is)
Then use some re-partition software e.g. Disk-Partiton.com
Any final thoughts???
Anyhow - thanks very much again
Rick

Arch: Install to & run from External USB Hard Disk Drive (HDD)

I wanted to play with ArchLinux 2009.02, but replacing the existing Debian-Lenny on the laptop's HDD wasn't an option. So I experimented with installing Arch on an external USB Hard Disk Drive.
I have tried to make this "newbie-friendly", so I hope the more experienced will forgive the detail.
Materials:
Three year old Dell Inspiron 6000
CPU = 2.0 GHz Pentium
RAM = 2.0 GB
Internal HDD = 80 GB
Internal CD/DVD R/RW
External USB HDD = Freecom FHD-2 Pro 80 GB
Archlinux 2009.02 install CD
Steps to install:
1. I put the Archlinux install CD in the drive and connected the external 80 GB HDD in the USB port.
2. When the Dell laptop was booted, I pressed F2 to enter the BIOS setup. I edited the boot sequence to the following:
Internal CD/DVD
External USB device
Internal HDD
On the Dell, you can also press F12 to select the preferred boot device for that boot.
3. I started the laptop and the Archlinux installation menu came up and I proceeded with installation following the "Official Arch Linux Install Guide" and the "Beginners Guide".
4. Used km to change to UK keyboard layout and then began the installer script (/arch/setup). I was installing from the core CD so I skipped the network steps.
5. HDD preparation.
This was fairly straightforward with two cautions:
(a) Make very sure that the external HDD (sdb) is selected for the operations.
(b) Remember to set the Bootable Flag for the first (/) partition on the HDD.
I chose 20 GB for /, 2 GB for swap and the remainder for /home.
6. The package selection and installation was fairly straightforward.
7. Configuration of System
This was section was straightforward with one warning:
USB had to be added to the HOOKS in the /etc/mkinitcpio.conf file!
I found this to be essential for my external USB HDD to function as a bootable device. Otherwise I got the same sorts of errors relating to unrecognisable file system types that other people have reported in the forum.
The relevant line from the end of the edited /etc/mkinitcpio.conf file is below:
HOOKS="base udev autodetect pata scsi sata usb filesystems"
8. Installation of GRUB was the other point where caution and/or correction was necessary.
When it asked where GRUB should be installed, I had to select sdb (my external USB HDD) and not any of the particular partitions on sdb. If the root partition sdb1 was selected then the laptop won't boot from the external USB HDD.
The GRUB /boot/grub/menu.lst as written by the installation routine specifies hd(1,0) which doesn't work when you try to reboot from the external USB HDD. When you boot Arch from the external USB HDD, as far as Arch is concerned - at that point in time - the external USB HDD is the first drive in the system. To fix this:
(a) When the Arch boot menu comes up, press e to edit the grub entries.
(b) Change the first line to hd(0,0)
(c) To the end of the kernel line add rootdelay=8
(d) Press b to boot the system with these temporary corrections.
(e) Once your Arch system has booted, edit the /boot/grub/menu.lst to make the above changes permanent.
The relevant portion of my /boot/grub/menu.lst looks like the following:
# (0) Arch Linux
title Arch Linux
root (hd0,0)
kernel /boot/vmlinuz26 root=/dev/disk/by-uuid/... ro rootdelay=8
initrd /boot/kernel26.img
# (1) Arch Linux
title Arch Linux Fallback
root (hd0,0)
kernel /boot/vmlinuz26 root=/dev/disk/by-uuid/... ro rootdelay=8
initrd /boot/kernel26-fallback.img
9. The laptop happily and consistently boots Arch Linux from the external USB HDD when it's plugged in before startup/booting.
Running Arch from the external USB HDD seems as quick as running Debian from the internal HDD.
So if there is a performance penalty associated with using an external USB HDD, my wife and I haven't noticed.
In summary, the three essential points to address during installation to an external USB HDD are:
Remember to set the bootable flag for the first partition.
Add USB to the HOOKS for /etc/mkinitcpio.conf file.
Correct the /etc/grub/menu.lst file.
I hope this is helpful.
Ted

Hi Rookie,
As you say, it is worth remembering the rootfstype= option for the kernel line just in case someone still has problems with GRUB after making all the other changes.
I was working with the most recent Arch 2009.2 release.
I only got messages about unrecognisable file system type when I tried booting with the "stock" or "as-installed" GRUB (before I edited /boot/grub/menu.lst). After editing /boot/grub/menu.lst to identify the drive correctly and add rootdelay, GRUB was able to do the rest and everything worked OK without any error messages.
Best wishes,
Ted

I can't copy my itunes library to an external hard disk drive!!

this is my first time at the forum and i dont find a better way to ask, i want to copy my itunes library to an external hard disk drive for have a back up, but when i try to copy it it appears this message "the item "itunes music" has 1 or more items that are in use and cannot be modified", i dont know why, then i search for help in apple support and this article http://support.apple.com/kb/HT1751, but i do what it says and i still having my problem, i can't copy my music, that message keep's appearing and it dont let me copy my music.

forget it i discover my problem, this message gives u 2 option stop or continue i just click continue and it get copied, i think this is normal but like this is my fisrt time i dot this i get confused, i think i still used to windows, i cant believe because i have a ear with this computer. well anything is a good experience.

I am a OS10.7.4 user. yesterday i bought a Lacie external hard disk but error message appear said " You cant open the applicant LaCie setup assistant because PowerPC applicants are no longer support". please help me how to connect my mac with Lacie??

i am a OS10.7.4 user. yesterday i bought a Lacie external hard disk but error message appear said " You cant open the applicant LaCie setup assistant because PowerPC applicants are no longer support". please help me how to connect my mac with Lacie??

You do not need the Setup Assistant; in fact, you do not need any software on an external hard drive. I have two LaCie's; I erased the drive as soon as I plugged it in. You will need to format it anyway because most hard drives come Windows formatted. So, if you only want to use it with the Mac, highlight it in Disk Utility and choose Mac OS Extended (Journaled) as the format and the GUID Partition scheme under Options. While doing that, it will erase the drive (and get rid of the LaCie software) - once finished, your drive is ready to use for Time Machine or any other backup plans you have for it.

Increase the hard disk drive capacity on a MacBook Air

is it possible to increase the hard disk drive capacity from 64 to 128 G? How do I do it?

It would appear Apple does not intend for you to do it.
It might be possible, if expensive.
I would consider an external drive.
increase flash storage on macbook air
Can one upgrade Flash Storage
Re: macbook storage upgrade??
increase flash storage on macbook air

Mac OSX wont reognise my internal hard disk drive

I have a problem where for some reason when I start up my Macbook Pro (intel core duo) it does not detect the internal hard disk drive at all. I have run a hardware test and it shows no problems whatsoever. I have tried resetting the PRAM etc and to no avail. Yesterday the system hung and I tried to force quit and it wouldn't do anything so eventually I held down the power key and when it tried to reboot this is the problem I was faced with (it would boot up with the "no entry" sign). I accepted complete defeat and went to completely re-install OSX however it doesn't even show the internal hard drive when I wait for it to give me install destinations. I had tried seeing the hard drive through disk utility however it only shows the install DVD and that's it in the sidebar. I resigned myself further to thinking either the logic board or the HDD had packed in all and I took it round to my brother in law to see if there is anything he could do without opening the machine (he is Oxford educated and writes programmes etc so is very knowledgable), now this is the part that has miffed us both, he started it up using a Linux disc and once running, Linux see's the hard drive with no problems. He has been able to access the HDD with absolutely no problems under Linux both reading and writing to it. I even took my Mac Mini round and he booted them both up in Linux and completely copied Mac OSX from the mini to the macbook pro but still when I try booting up its as if the HDD isn't even there. Why can Linux see the drive and not Mac OSX? Please don't be affraid to get very technical in your answers as they may mean nothing to me but will probably all make sense to my brother in Law. Any sugestions at all would be greatly accepted.

Dear mcdkev,
You guys may have made a big error cloning the Mini HD into the MBP. They both have very different drivers and hardware settings and their OS X versions are customized to fit the hardware. That is why each mac comes with it's own version of OS X and their backup disks. That's a reason why it did not work.
Ok, so now that you do not have any of the original info on the MBP try the following:
Use linux to scan the disk surface & repair any problems.
Reformat the drive as DOS or FAT 32. (I wouldn't go into any linux specific format unless you can "Apple" format it, which I don't think linux has that option.)
Now, the MBP should be able to see it's drive...
boot from the OS X DVD , from the Utilities menu choose Disk Utilities, partition the drive as GUI file system (in case the linux format made the drive a "system boot record", you do not want that... )
Then format the drive as "OS X Extended Journaled"
Now go back to install and install your original basic set of OS X (the factory default).
*If nothing works, please do take your MBP to the Apple store or to a certified tech before you do more damage to the drive and it becomes unusable ...*

How to reinitialize an external hard disk drive which serves for Time Machine?

How to reinitialize an external hard disk drive which serves for Time Machine?
Thanks for your answer.

Everything you need to know about initializing (formatting) is here.
http://pondini.org/OSX/DU1.html
Lots of useful information on TM is here in the same place.
http://pondini.org/OSX/Home.html

HT5628 When I install Windows 8 on my MacBook Pro(13-inch,Early2011),the Super DVD Drive doesn't appear in Windows 8 and installing Boot Camp 5 drivers doesn't solve my problem,what can I do?

When I install Windows 8 on my MacBook Pro(13-inch,Early2011),the Super DVD Drive doesn't appear in Windows 8 and installing Boot Camp 5 drivers doesn't solve my problem,what can I do?

Go into your system preferences and click the startup disk icon then select your Mac HD.

Hard disk drive doesn't appear on home screen

Similar Messages

Maybe you are looking for