Hard disk drive upgrade

hi there
newbie mac user - got my macbook in late dec 07 and so far so good; have not yet experienced any problems i have read in the macbook discussion forum. when i bought the macbook, i opted for the 160GB HDD, which is fine for my current use. anyhow, i have some PC software that is only available on PC and won't run with Codeweaver's Crossover (that software require's microsoft's .net framework, which is not compatible with Crossover). So I'm now thinking of upgrading to a 250GB hard disk drive and have Windows XP installed.
so my questions are:
1. Any notebook SATA HDD will do? the one currently installed is a Fujitsu, which works fine but i can't find any place that sells it. so i'm thinking of Western Digital.
2. Setting up the new HDD: my thoughts are to firstly do a time machine backup of the entire current HDD onto a removable HDD. then remove the old HDD and replace with the new HDD. install OS X then run time machine to restore on to the new HDD, which i hope will then put the new HDD into the same state as the old HDD. will that work? my thinking is that it will save me time having to reinstall various apps.
On an unrelated matter, my biggest gripe with Win XP (and all preceding versions of Windows) is that the OS gets progressively slower and slower during start up and shut down over time (no speed problems once up and running). the normal solution is to do a clean install. does OS X suffer the same problem? my macbook is still quite new so everything is running super fast.
cheers.
boon

Have you tried Parallels or VMware Fusion. They work very good running windows.
You need a 2.5 inch SATA drive that meets these dimensions.
Physical Dimensions
English
Height: 0.374 ±0.008 inch
Length: 3.94 ±0.010 inch
Width: 2.75 ±0.010 inch
Weight: 0.26 Pounds (±0.10 lb)
Metric
Height: 9.5 ±0.20 mm
Length: 100.2 ±0.25 mm
Width: 69.85 ±0.25 mm
Weight: 0.117 kg (± 0.082 kg)
I replaced my 80 GB drive with a Western Digital Scorpio WD3200BEVT 320GB 5400 RPM 8MB Cache SATA 3.0Gb/s Notebook Hard Drive - OEM. It is great.
I took my old drive out and use one of these, OWC Hard Drive Enclosures, to install it in. Then I used that to help recover my system to my new drive.
These are good sources for drives.
OWC MacBook Ram and Hard drives
NewEgg.com LapTop Hard Drives

Similar Messages

Can I upgrade MacBook Pro hard disk drive next year?

Hi there! I'm new to the Apple Support Communities!
I am going to buy a new 13" MacBook Pro, 2.5GHz. I am going to buy the base model, with a 500GB 5400 RPM hard disk drive. Right now, I can't afford a 256GB solid-state drive, but I'll have enough for one by later next year. So, I will have done some stuff on my Mac by the time I can upgrade it. I know how to install the drive itself, but how do I transfer my information?
Here are the issues:
1) I don't know how I would make it so I could boot from an external USB.
2) And I don't know how to get all my personal information from one drive to the other.
For "2", I think I could back up my Mac to a hard drive with Time Machine, and then restore from a backup. But Time Machine couldn't back up the whole OS, right? And what would the procedure be anyway? Just turn it on when I'm done the upgrade?
If someone who has done this before could provide step-by-step instructions, I would really appreciate it!
Thanks,
Solid-State Me 

Yes you can replace the hard drive at any time. Purchase a replacement drive from any store you like - newegg or mcetech are good stores (among many others) - and when you purchase the new drive, also purchase a drive enclosure. Then download a program called "super duper" and follow the instructions to use that software. When your drive arrives, put the new drive in the enclosure, plug it in to your computer and run "super duper" with the option to "make the drive bootable" and let it finish. What it's doing is copying your drive onto the new drive. Once the copy is finished, you can shut down your computer, remove the drive, install the new one, and put the original drive into the enclosure. Now you have an external hard drive that is repurposed instead of throwing it away. Keep that drive intact for a few weeks without erasing or adding data to be sure you are happy with the new drive and how it performs. After that, use the drive to store files, backup the internal, transfer stuff, whatever.

Is it possible to upgrade the internal Hard disk drive on the iMac

Is it possible to upgrade the internal Hard disk drive on the iMac?

Yes but it's definitely not advised. If you have a machine newer than 2009 Apple uses drives that have integrated heat sensors. This makes upgrading much more difficult but not impossible. If you have a machine still under warranty then definitely DO NOT do this yourself as you may void the warranty not to mention it isn't for the faint of heart. Take the machine to an AASP to have the work done, you will need to find one in your area willing to do so.
If you are considering a new machine then simply buy the configuation you need.

9.2.1 upgrade - hard disk driver prob.

Hi all,
System
PowerPC G4 dig audio dual533
768mb ram
40gb HD - 9.1OS
120gb HD - OSX tiger
I have installed a 2nd hand 120Gb HD which I totally erased writing 0's over it then partitioned (1) MacOS extended.
Loaded OSX tiger onto it and all is sweet no problems at all and loving the new interface!
Now the problem is I want to use my Illust9 & Phsop6 on the old 40gb HD which is running OS9.1.
Tried to access one of the progs via Tiger, classic started up and basically hung on the startup screen so I had to cancel it. That is when the problems started.
I booted up the OS9.1 drive and lost use of my enternet300 adsl internet connection. Reloaded adsl software, didn't fix. Also missing Quicktime VR plus tried using Illust9 and got systems error of controls trip extension. A few other things seemed to go wrong as well.
Read somewhere that it was highly rec to upgrade to 9.2.2 to utilise the classic environment effectively.
As I had lost my internet connection on the old HD I downloaded the Mac OS 9.2.1 Update.smi, Mac OS 9.2.2 Update.smi and HardDriveUpdate1.smi files from my Tiger HD.
Back to the OS9.1 HD to install the updates and it comes up with.....
The hard disk driver on the disk "PowerMac G4 Install" cannot be updated with this program because the disk is not an Apple hard disk. Contact the manufacturer of your computer or hard disk to see if you need to update the driver.
After alot of stuffing around I have done the following in this order.
after each one it didn't fix the problem
1. OS9.1 software restore in place
2. OS9.1 software restore clean install
3. Erased HD and initilised 1 part partition using OS9.1 software install CD
then installed new OS9.1 by booting up from install CD
4. Erased HD and initilised 1 part partition using OSX tiger software install DVD from 120gb HD, then installed new OS9.1 by booting up from install CD
thinking this would sort the driver problem but no go.
same problem when trying to upgrade to 9.2.1!!!!!!!!!!!
any ideas?
40gb HD is a IBM-IC35L040AVER07-0
appreciated
PowerPC G4 digital audio dp533 Mac OS X (10.4.5)
PowerPC G4 digital audio dp533 Mac OS X (10.4.5)
PowerPC G4 digital audio dp533 Mac OS X (10.4.5)

OK,
I have Erased the 40gbHD and erased, initilised it with a 1 part partition using disk utility from the OSX tiger on the 120gb HD, then installed a new OS9.1 by booting up from the OS9.1 install CD.
Used the 9.2.1 upgrade which was downloaded from Apple.
Followed thier instructions in the read me file by
turning extensions to 9.1 base
make sure file sharing is off (wasn't on in the first place)
then restarted
no other apps running and straight into starting the upgrade
started the install process
unchecked the option to update driver
starts to install goes for about 6% and then the box comes up with......
This version of Mac OS can not be installed over the localized version of Mac OS on the disk named "XXXXXXX XXXXX".
Please choose a different destination disk, or perform a clean installation.
SURELY IT CAN"T BE THIS HARD TO UPGRADE FROM 9.1 to 9.2.1 to 9.2
COME ON APPLE help me out here!!!!! FFS!
can't do a clean install, haven't got the disks!!!!!

What hard disk drive should I have to buy and maximum what gb I can upgrade to mid 2011 21.5 inc mac?

what hard disk drive should I have to buy and maximum what gb I can upgrade to mid 2011 21.5 inc mac? Also do you think I can replace myself at home or I need to take specialist?

Hi, I take it you mean the Optical drive?
If so, here's a few...
http://eshop.macsales.com/shop/optical-drives/superdrives/

Upgrading Hard Disk Drive of Lenovo THINKPAD T500 2055 ?

Hi there,
My personal laptop is Lenovo THINKPAD T500 2055, and its main specifications as follows:
- Intel Core 2 Duo processor T9400 (2.53GHz 1066MHz 6MBL2).
- 8 GB DDR3 SDRAM Memory Module 4 GB (2 x 4 GB) 1066MHz DDR31066/PC38500 DDR3 SDRAM SoDIMM Kingston
- ATI Mobility Radeon 3650 with 256MB.
- 160 GB Hard Disk Drive, 7200rpm.
I really need to upgrade the Hard Disk Drive to a bigger size (500 GB, 7200 rpm). and, my major questions are as follows:
* Could you please advise me on which Hard Disk Drive (500 GB, 7200 rpm) should I buy for my T500 laptop?
For example, I found (http://www.amazon.com/gp/product/B003NSBF32) But I have no idea what T500 supports and what it doesn't... Therefore, I need your help to guide me about this matter. In other words, How do you know if ABC-Hard Disk Drive fits with T500 and XYZ-Hard Disk Drive doesnt fit? What is the clue in knowing what T500 accepts?
My another question is:
* How easy is it to remove/replace Hard Disk Drive in Lenovo ThinkPad T500 ???
I already watched CRU Removals/Replacements on (http://www.lenovoservicetraining.com/ion/R61_T61/index.html), But the clip is for ThinkPad R61 and T61. So, Could you please help me how to handle it with T500 ?
I would greatly appreciate your inputs.
Thanks for your consideration of my request, and I very much look forward to hearing from you soon !
Solved!
Go to Solution.

Hi and welcome to the forum!
Any SATA drive that is 2.5'' wide and 9.5mm high will work in your T500. The drive you linked to meets the requirement and thus will work.
For removal and installation instructions, have a look here:- http://www-307.ibm.com/pc/support/site.wss/migr-71568.html
Hope this helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

Increase the hard disk drive capacity on a MacBook Air

is it possible to increase the hard disk drive capacity from 64 to 128 G? How do I do it?

It would appear Apple does not intend for you to do it.
It might be possible, if expensive.
I would consider an external drive.
increase flash storage on macbook air
Can one upgrade Flash Storage
Re: macbook storage upgrade??
increase flash storage on macbook air

Qosmio X500/00X System Recovery (Factory Reset) From Hard Disk Drive or Separate Disk

Hey Guys,
Looking for your advice and any links if any...cheers in advance
My Situation
In December 2009 I purchased a Toshiba Qosmio X500 - Model No. PQX33A-00X00J
At the time I upgraded my purchase from Toshiba Reseller BD4U, going from the standard 1x 500GB Sata drive + 1x 64GB SSD... to instead having 2x 500GB sata drives. I purchased with 3 year onsite next business day warranty, that is is now expired.
It came loaded with MS Win 7 Premium Home Edition - but no disks provided.
My Needs
I need/want to factory reset my PC - its starting to run slow
I need to re-partition from my existing 4x partitions to just having 2
The Issues
Possibly as a result of upgrading the disk drives at time of purchase, I don't believe I have a hidden Recovery partition in order to do a System Recovery from the Hard Disk Drive - see image of my current partitions attached
I don't have Win 7 OS installation disks or Toshiba Driver disks as they should have been installed by Toshiba
My Questions
Do You agree that I DONT have a Recovery Partition - when looking at the partition image? I'm confused on this point coz people say its hidden!?
Given I have no Toshiba Drivers Disk or Windows 7 OS disks - what should I do? I'm thinking of downloading Win 7 (use my product key from sticker under PC) and making a disk/USB (but need to learn how)
Is this where I get ALL necessary Toshiba drivers for my PC from?
Does Toshiba provide a link on its site and instructions on where to get Win 7 from so I can make a recover disk??
Notes
Tried to email Toshiba support but at step 1 of their email process validation failed due to my PC being out of warranty so will call them on Monday instead
THANK YOU THANK YOU, for any help you can give big ro small
Cheers
Rick

WOW, thanks Macius for that great, full and thorough reply...cheers mate
I suspected I didn't have a recovery partition - so thanks for confirming it as I planned to risk it and try! I guess it doesn't really matter why, and it would be futile to go and blame the re-seller or Toshiba at this late stage in the game in hopes they would help...
Yeah, I just went to Microsoft Software Recovery hoping to download Win 7 OS and create a recovery disk but of course Microsoft would NOT allow it due to it being software that was pre-installed on the device blah blah blah (see error image)
And I didn't bother back then in 2009 to create recovery media as you wisely descibed, mostly due to laziness and mentally putting it in the 'too hard basket'...I didn't really understand it - or much about computers at the time.
Re - your Option #2 - thanks for confirming Toshiba drivers. I could/can do this - but don't really want to buy something I already have, perhaps I'll check out ebay or see if a friend has a disk
Re - your Option #1 - I'm currently based in Vietnam and wont be back in Oz till late in the year, so will see if I can find a reliable Toshiba service provider here - but wont hold me breath on this one
I'm thinking that IF Option #1 is a No-Go then - maybe Plan B or Option #3 could be:
Do an Audit of Programs to identify those I don't need and can safely remove - then remove using Control Panel/ Remove Programs tool
Reformat all other drives (not C:// where OS is)
Then use some re-partition software e.g. Disk-Partiton.com
Any final thoughts???
Anyhow - thanks very much again
Rick

Adding a Old PC hard disk drive as a external drive to my MBP

So around 5 years ago i got the WD-160JB hard disk drive. I want to see all the things i did back then.
I want to be able to connect this WD-160JB drive as a external hard drive to my mac.
What i am wondering is if you can somehow have a cable or something which links the USB from the MBP to the hard disk.
Suggestions?
Thanks. Matt

You need a disk enclosure or a docking station. Consider the Thermaltake Docking Station that fits both laptop (2.5") and desktop drives (3.5"). This is great for upgrading your harddrive and moving everything over easily with the Disk Utilities.
Best Buy has them if you need it soon. And Best Buy will now price match Amazon! They don't advertise it, but Amazon is taking too much business away so they had to do something. You have to ask. Amazon is already programmed into their registers for price matching.
Thermaltake - SATA Hard Drive Docking Station with eSATA and USB Connection
Best Buy: http://www.bestbuy.com/site/Thermaltake+-+SATA+Hard+Drive+Docking+Station+with+e SATA+and+USB+Connection/8990443.p?id=1218007083869&skuId=8990443&st=thermaltake% 20drive%20dock&cp=1&lp=1
Amazon: http://www.amazon.com/Thermaltake-BlacX-eSATA-Docking-Station/dp/B001A4HAFS/ref= sr_1_10?ie=UTF8&qid=1336338247&sr=8-10

Hard disk drive replaicement

I have a Hard Disk 1 (301) error message, when turning on my laptop. It says something along the lines of "the hard disk has detected an imminent failure".
My laptop is a HP Pavilion G7-1033cl (windows 7), purchased in 2011, so it's out of warranty.
As far as a noticed in some other answers, I shoul replace the hard-disk for sure.
Ok, my question is: What kind of hard disk shoul I buy for replacing it? What's the best recommended?
Thank you for your help!
GStoicu

Whenever the Hard Disk fails with an error Hard Disk 1 [301] that indicates that the Hard Disk Drive has failed and that requires a replacement to resolve the issue
This issue could be due to Application or driver conflicts, virus issues, file corruptions due to incompatible applications, improper shutdowns, update failures due to conflicts, sudden power surges, if notebook is dropped etc..
HP will provide a replacement Hard Disk Drive if the Notebook warranty is Active, If not you need buy a SATA Hard Disk Drive from a retail shop nearby
Please make sure you are getting at least equal capacity as the original one in order to use Recovery Disks. If you need you can buy a larger, but not smaller capacity Hard Disk Drive. For example if you have a 500GB Hard Disk Drive you can upgrade it to 750GB Hard Disk Drive but not 320GB Hard Disk Drive
Please try the below shown troubleshooting steps once:
Step 01. Remove the battery and unplug the AC/Power Adapter
Step 02. Press and hold the Power button for more than 30 Seconds
Step 03. Plug in the AC/Power Adapter (leave the Battery out for now)
Step 04. Press the Power button and check if the Unit works normal
If the above mentioned steps does not help, then you can try reseating the Hard Drive on your Notebook
If the issue persists again please Contact HP if your HP Notebook is under warranty, HP would replace the Hard Disk Drive and provide you a Recovery media to restore factory operating system after replacement (if you've not yet created Recovery Discs/USB Media)
Note: Back up all the personal data to an external drive if it's possible. Otherwise you could connect the failed HDD via SATA to USB adapter with another PC or same PC after replacement of HDD & re-installation of OS and try copying /recovering the files. You can also refer to the below shown link for further support
http://www.wikihow.com/Recover-Data-from-the-Hard-Drive-of-a-Dead-Laptop
Please click on the link In order to Identify, Prevent, Diagnose & Recover from Drive Failures on HP Notebook Hard Drives & Solid State Drives :
http://h10032.www1.hp.com/ctg/Manual/c02876562.pdf
You can Check your warranty Here to verify the status and Click Here to order a new Hard Drive
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP

How does one SUCCESSFULLY transfer Time-Machine backup to a new (larger) hard disk drive using OSX 10.5.8

I have read a number of articles about how to transfer a complete Time-Machine backup to a new (larger) hard disk-drive. Some of these articles are specifically for OSX10.6 users, which are not applicable to me since I am operating with OSX 10.5.8.
However, I have tried several times to use the Disk Utility 'Restore' function, dragging my old time-machine volume into the 'Source:' box and my new volume into the 'Destination:' box. This works, of sorts, BUT the newly created volume on the new larger hard disk-drive remains the same size as the original volume on the old Time-Machine HDD, with no apparent way of increasing the new volume's size. So I am not really any better off:
E.g. the total capacity of my new HDD is stated by 'Disk Utility' to be 465.8 GB, of which I'm told 228.2 GB is used for the Backups.backdb folder, but only 4.6 GB of free space is actually available. Yet under the 'Partition' tab of 'Disk Utility' it tells me that there is still 236.4 GB of available space.
Does anyone know how to resolve this issue without upgrading to OSX 10.6?

First, how did you prepare your new drive? See:
Drive Preparation
1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
If you plan to partition this new drive then be sure you create a larger partition for TM than your old volume.
Next, clone your old TM volume:
Clone using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4.Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.

Comparison of SSD with hard disk drives

Attribute or characteristic
Solid-state drive
Hard disk drive
Spin-up time
Instantaneous.
May take several seconds. With a large number of drives, spin-up may need to be staggered to limit total power drawn.
Random access time[45]
About 0.1 ms - many times faster than HDDs because data is accessed directly from the flash memory
Ranges from 5–10 ms due to the need to move the heads and wait for the data to rotate under the read/write head
Read latency time[46]
Generally low because the data can be read directly from any location; In applications where hard disk seeks are the limiting factor, this results in faster boot and application launch times (see Amdahl's law).[47]
Generally high since the mechanical components require additional time to get aligned
Consistent read performance[48]
Read performance does not change based on where data is stored on an SSD
If data is written in a fragmented way, reading back the data will have varying response times
Defragmentation
SSDs do not benefit from defragmentation because there is little benefit to reading data sequentially and any defragmentation process adds additional writes on the NAND flash that already have a limited cycle life.[49][50]
HDDs may require defragmentation after continued operations or erasing and writing data, especially involving large files or where the disk space becomes low. [51]
Acoustic levels
SSDs have no moving parts and make no sound
HDDs have moving parts (heads, spindle motor) and have varying levels of sound depending upon model
Mechanical reliability
A lack of moving parts virtually eliminates mechanical breakdowns
HDDs have many moving parts that are all subject to failure over time
Susceptibility toenvironmental factors[47][52][53]
No flying heads or rotating platters to fail as a result of shock, altitude, or vibration
The flying heads and rotating platters are generally susceptible to shock, altitude, and vibration
Magneticsusceptibility[citation needed]
No impact on flash memory
Magnets or magnetic surges can alter data on the media
Weight and size[52]
The weight of flash memory and the circuit board material are very light compared to HDDs
Higher performing HDDs require heavier components than laptop HDDs that are light, but not as light as SSDs
Parallel operation[citation needed]
Some flash controllers can have multiple flash chips reading and writing different data simultaneously
HDDs have multiple heads (one per platter) but they are connected, and share one positioning motor.
Write longevity
Solid state drives that use flash memory have a limited number of writes over the life of the drive.[54][55][56][57] SSDs based on DRAM do not have a limited number of writes.
Magnetic media do not have a limited number of writes.
Software encryption limitations
NAND flash memory cannot be overwritten, but has to be rewritten to previously erased blocks. If a software encryption program encrypts data already on the SSD, the overwritten data is still unsecured, unencrypted, and accessible (drive-based hardware encryption does not have this problem). Also data cannot be securely erased by overwriting the original file without special "Secure Erase" procedures built into the drive.[58]
HDDs can overwrite data directly on the drive in any particular sector.
Cost
As of October 2010, NAND flash SSDs cost about (US)$1.40–2.00 per GB
As of October 2010, HDDs cost about (US)$0.10/GB for 3.5 in and $0.20/GB for 2.5 in drives
Storage capacity
As of October 2010, SSDs come in different sizes up to 2TB but are typically 512GB or less[59]
As of October 2010, HDDs are typically 2-3TB or less
Read/write performance symmetry
Less expensive SSDs typically have write speeds significantly lower than their read speeds. Higher performing SSDs and those from particular manufacturers have a balanced read and write speed.[citation needed]
HDDs generally have symmetrical read and write speeds
Free block availability andTRIM
SSD write performance is significantly impacted by the availability of free, programmable blocks. Previously written data blocks that are no longer in use can be reclaimed by TRIM; however, even with TRIM, fewer free, programmable blocks translates into reduced performance.[25][60][61]
HDDs are not affected by free blocks or the operation (or lack) of the TRIM command
Power consumption
High performance flash-based SSDs generally require 1/2 to 1/3 the power of HDDs; High performance DRAM SSDs generally require as much power as HDDs and consume power when the rest of the system is shut down.[62][63]
High performance HDDs generally require between 12-18 watts; drives designed for notebook computers are typically 2 watts.

I wish I could get my head round the SSD vs HDD with a NLE rig. My builder is trying to persuade me to use a Toshiba 256Gb THNSNC256GBSJ for OS and programs, and it is only NZ$20 more expensive than the 450Gb 10k rpm VelociRaptor I was originally planing to use for the OS. That sounds suspiciously cheap to me, and I am concerned about the finite writes to SSD - mainly because I don't really understand it.
The rest of the new build is
3930K
Gigabyte X79-UD5
8 x DDR3 1600
Coolermaster with 750W PSU
Geforce GTX570
I plan to transfer the drives from my current system as a starting point, and reassess after giving it some use. That means
Either the above SSD or 450Gb 10k Raptor for OS (new drives)
300Gb 10k rpm Raptor (currently used for OS in old box)
150Gb 7k4 rpm Raptor (reserved for Photoshop Scratch in old box)
2 x 1Tb WD Blacks (data drives)
2 x 1Tb WD USB3 externals
I don't know how I would configure the drives in the new box, but have seen Harm's table and will try to follow his advice. It's a dreadful thing to admit, but I don't have a backup strategy, and the above drives are well over half full. Well over! And I am only just getting serious about video, (the rest is mainly CR2 files from my Canon 1Ds3 and 1D4)
I know it must be like banging your head against the wall, but should I avoid that SSD and go with the 450G Raptor? I have read a comment that the WD Blacks don't work well as Raid0. Is that BS or true?
I am about to give the go-ahead so need to confirm the spec.

Just bought a Lenovo 3000 N200 without a hard disk drive, need software

I just bought a Lenovo 3000 N200 Type 0769-BLG assembly date 07/09 from e-bay, it looks brand new but it had a fault, it was dead, perhaps a faulty motherboard and the hard disk drive had been removed. Assuming I can get the fault fixed, where can I get the Lenovo software that came with the original hard disk drive, I would prefer a free source, if that is possible, perhaps some kind person has put all of the CD's on to a DVD that I can borrow or buy a copy of. I was an IBM employee for 30 years before retiring 15 years ago. Dan McLean in Scotland, UK.

Call customer service directly to get a quick solution for this.
IPnaSh
First Spanish Community Guru - Colaborador ad honorem

I can't copy my itunes library to an external hard disk drive!!

this is my first time at the forum and i dont find a better way to ask, i want to copy my itunes library to an external hard disk drive for have a back up, but when i try to copy it it appears this message "the item "itunes music" has 1 or more items that are in use and cannot be modified", i dont know why, then i search for help in apple support and this article http://support.apple.com/kb/HT1751, but i do what it says and i still having my problem, i can't copy my music, that message keep's appearing and it dont let me copy my music.

forget it i discover my problem, this message gives u 2 option stop or continue i just click continue and it get copied, i think this is normal but like this is my fisrt time i dot this i get confused, i think i still used to windows, i cant believe because i have a ear with this computer. well anything is a good experience.

How can I optimize my hard disk drive usage and performance in Windows 8 or Windows 7?

QuestionHow can I optimize my hard disk drive usage and performance in Windows 8 or Windows 7?
AnswerThere are a few simple steps you can take to ensure your hard disk drive is used optimally.
Use Toshiba HDD Protection
Many Toshiba laptops come with a program called Toshiba HDD Protection pre-installed. This program helps to protect your hard disk drive from being damaged due to falls or impacts. By default, it should already be enabled. You might be tempted to lower the detection levels in this application, but doing so could cause your hard disk drive to be damaged. Remember that while the application can reduce the chance of damage, you should still avoid allowing the laptop to fall or suffer rapid impacts.
For more information on this utility, see the following article:
TOSHIBA HDD Protection
Optimize the drive
Windows 8 and Windows 7 optimize hard disk drives automatically through a process called defragmentation. Unless you've disabled this, you don't need to do anything. If you have disabled this and want to run the process, you can still do so.
In Windows 8, search for "Defrag" at the Windows Start screen and select "Defragment and optimize your drives."
In Windows 7, search for "Defrag" in the Start Menu's search field and select "Disk defragmenter."
You can use this tool to optimize your hard disk drives, allowing Windows to find needed files faster.
Remove items from startup
Some applications run automatically when Windows starts. This can add additional functionality, but it also decreases the performance of your computer. Sometimes you might want to disable certain programs from starting automatically.
In Windows 8, search for "Task Manager" at the Start screen. Select the "Startup" tab. Select an application you'd like to disable from starting automatically and then click the "Disable" button in the lower-right.
In Windows 7, type "msconfig" in the Start Menu's search field and press ENTER. Uncheck the boxes next to applications you'd like to disable from starting automatically.
You should be sure of the purpose of an application before disabling it from starting automatically. Some applications might be important. If in doubt, you might consider searching on the Web to discover more information about a program. Remember that if you find that you disabled something vital, you can always re-enable it.
For more information, please see the following video:

QuestionHow can I optimize my hard disk drive usage and performance in Windows 8 or Windows 7?
AnswerThere are a few simple steps you can take to ensure your hard disk drive is used optimally.
Use Toshiba HDD Protection
Many Toshiba laptops come with a program called Toshiba HDD Protection pre-installed. This program helps to protect your hard disk drive from being damaged due to falls or impacts. By default, it should already be enabled. You might be tempted to lower the detection levels in this application, but doing so could cause your hard disk drive to be damaged. Remember that while the application can reduce the chance of damage, you should still avoid allowing the laptop to fall or suffer rapid impacts.
For more information on this utility, see the following article:
TOSHIBA HDD Protection
Optimize the drive
Windows 8 and Windows 7 optimize hard disk drives automatically through a process called defragmentation. Unless you've disabled this, you don't need to do anything. If you have disabled this and want to run the process, you can still do so.
In Windows 8, search for "Defrag" at the Windows Start screen and select "Defragment and optimize your drives."
In Windows 7, search for "Defrag" in the Start Menu's search field and select "Disk defragmenter."
You can use this tool to optimize your hard disk drives, allowing Windows to find needed files faster.
Remove items from startup
Some applications run automatically when Windows starts. This can add additional functionality, but it also decreases the performance of your computer. Sometimes you might want to disable certain programs from starting automatically.
In Windows 8, search for "Task Manager" at the Start screen. Select the "Startup" tab. Select an application you'd like to disable from starting automatically and then click the "Disable" button in the lower-right.
In Windows 7, type "msconfig" in the Start Menu's search field and press ENTER. Uncheck the boxes next to applications you'd like to disable from starting automatically.
You should be sure of the purpose of an application before disabling it from starting automatically. Some applications might be important. If in doubt, you might consider searching on the Web to discover more information about a program. Remember that if you find that you disabled something vital, you can always re-enable it.
For more information, please see the following video:

Hard disk drive upgrade

Similar Messages

Maybe you are looking for