Hard disk failed failure id m06k39-56a5t5-xd003g-6or003

how can i fix it?

Hi,
Run the test on the Hard Drive from the Bios Menu as follows.
Shut down the notebook.  Tap away at f10 as you start the notebook to enter the bios menu.  Under the Advanced or Diagnostic tab you should find the facility to run a test on the Hard Drive.  Post back with the details of the error message this generates.
Can you also post back with the following.
1.  The full Model No. and Product No. of the notebook ( from the service tag underneath your notebook ) - see Here for a further explanation.
2.  The full version of the operating system you are using ( ie Windows 7 32bit ).
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

  • HP Pc 3010 Microtower VN 969EA - Hard Disk Reporting failure

    The folloing hard disks reporting failure - Disk nameT3320418AS ATA Device volume C:\ D:\ E:\

    Meshmesh -
    Is this hard drive a Seagate ST3320418AS ??
    320 Gbytes, Barracuda 7200.12 Serial ATA
    http://www.seagate.com/staticfiles/support/disc/manuals/desktop/Barracuda%207200.12/100529369c.pdf
    IF YES, then assure that the Data on this drive is backed up.
    That should be your immediate step, backup/retrieve important files, photos or data,
    IF the drive is still accessible.
    This Seagate drive was released in 2008-2009 time period (5 to 6 years ago).
    Seagate Desktop HDD (Barracuda Hard Drive) Product Page
    http://www.seagate.com/support/internal-hard-drives/desktop-hard-drives/desktop-hdd/

  • 14 Months and the Hard Disk Fails!!!!!

    Well I am raging, I have had the Mac for 14 months now, and at the 12 month point I had the option of extending the warranty, because of Christmas I had only one opportunity to buy over the phone, from a cold call!! Now I never do this and told them that, they said its a one chance only because they are closed over Christmas.
    So 2 weeks ago my hard disk failed, its damaged beyond even data recovery!! I have tried to find an online complaints procedure, err none to be found. I think it is shocking that a piece of equipment should fail less than 2 months out of warranty!!
    Anyone with any advice for a complaints procedure would be greatly appreciated.
    Thanks
    Andy

    Had one lady opt out of one on an iPod , Apple only covers for 15 days , something happened on the 17th day , she was out almost 200 bucks and nothing could be done. SOL
    Why did you rip off the old lady? Just because she didn't buy the extended warranty?
    You are obviously cluelss. The iPod warranty is for one full year, not 15 days.
    http://docs.info.apple.com/article.html?artnum=304869#faq2
    "How long is my iPod covered by Apple’s warranty?
    Your iPod or iPod shuffle is covered for one year by Apple’s Limited Warranty for iPod. Warranty service for eligible repairs is available at no charge for twelve months from the date of original retail purchase (”date of purchase”). If you have purchased an AppleCare Protection Plan for iPod, there will be no shipping and handling fee. A $29.95 shipping and handling fee will apply to all warranty repairs performed six months after date of purchase."

  • Hard disk failed

    what is the major isu can make macbook pro hard disk failer ..??

    Please repeat your question with complete words.

  • Hard disk failing SMART test

    Hi,
    It's been 2 days my imac is much slower to boot (about 2min from the startup sound until I get to a responsive desktop).
    After checking the system with Techtools and Smart Utilities is turns out SMART status is failed.
    Smart Utilities shows only one problem: Reallocated bad sectors with value=8, threshold=36, gross value=3760.
    I wonder if 3760 is the number of bad sectors on the disc or just a coded value in the hdd firmware.
    The most worrying thing is that the count of reallocated bad sectors seems to be increasing slowly but steadily over time.
    Everything works fine once the start up sequence is complete but it seems clear from the system indication that The hdd must be replaced sooner rather than later.
    Imac 27" i7 late 2009 with 1To hdd, still under Apple Care plan
    My questions are:
    - At this stage can the hdd fails anytime or do I still have some time to change it ?
    - Will this S.M.A.R.T failure and the hdd replacement be taken care of by Apple Care immediately or will they want to wait until it fails completely ?
    - How easy will it be to restore my entire system on a new hard disk from the time capsule ? (iphoto collection, itunes library, installed third party apps, emails... All of this will work fine after a restore on a brand new hard disc ?)
    - After restoring from time capsule will the ipad or ipod be able to synchronize with itunes as if nothing happened ?
    Maybe someone in here had similar troubles with their hdd and can shed some light on this.

    My questions are:
    - At this stage can the hdd fails anytime or do I still have some time to change it ?
    - Will this S.M.A.R.T failure and the hdd replacement be taken care of by Apple Care immediately or will they want to wait until it fails completely ?
    - How easy will it be to restore my entire system on a new hard disk from the time capsule ? (iphoto collection, itunes library, installed third party apps, emails... All of this will work fine after a restore on a brand new hard disc ?)
    - After restoring from time capsule will the ipad or ipod be able to synchronize with itunes as if nothing happened ?
    Maybe someone in here had similar troubles with their hdd and can shed some light on this.
    Your HD is failing. Backup immediately!!!
    Yes AppleCare will take care of it, contact them immediately.
    It's very easy to restore your system, if you bring your Time Capsule in when the repair is done the Apple Store or AASP  should be able to help you do the restore. Do not repeat do not do it wirelessly though!
    After the restore has been completed everything should be back to normal including your syching the iPod & iPad.

  • Hard disk failing?

    Hello everybody,
    My computer started having problems this morning.
    I have a Macbook Pro Unibody from 2008 running Lion (the first unibody that came out) with 320 gb hard disk and 4gb RAM.
    Yesterday, everything was doing just fine, I put on some music before going to bed and set up an app called iTaf to stop iTunes automatically after an hour. I didn't ask it to shut the computer down though.
    When I woke up this morning, my computer was stuck on a grey screen and was completely unresponsive. I could'nt do anything else but force shut it down with the power button.
    After rebooting, my computer was extremely sluggish and was pretty much unresponsive. I force shut it down a couple of times (it wouldn't shut down properly), but the problem was remaining.
    I tried starting it up in safe boot mode, but after 2 hours, my computer still hadn't booted and the loading circle kept spinning.
    Now, everytime I turn my computer on, I still have the safe boot mode screen (grey screen with the circle spinning and the loading bar filling a little bit, then disappearing and the circle keeps spinning, without anything else happening) and it won't reboot like it did before I started safe boot mode.
    I ran Disk Utility through Internet recovery (I don't have a Super Drive anymore) and it says that everything's ok with my hard disk. Mackintosh HD is not mounted though and locked (I have Filevault enabled). When I try to unlock the drive, it won't accept my password (I have an azerty keyboard and the layout was set to US. I changed it back to French, but it still won't accept my password, probably because it contains the letter " à " and the french layout doesn't kick in.).
    So I tried running single user mode, and when I type in the fsck -fy command, this is what I get:
    CoreStorageGroup: :complete IORequest - error 0xe00002ca detected for LVG "Macintosh HD" (E97F03A2-D03C-48C0-85D2-B470539CC780), pv F0B573D5-41D5-42E9-8B1D-7E432E4C99F6, near LV byte
    disk1: I/O error.
    Invalid record count
    (4, 279)
    ** The volume Mackintosh HD could not be verified completely.
    /dev/rdisk1 (hfs) EXITED WITH SIGNAL 8
    What is strange though, is that I can still run my computer under guest mode and surf the internet...
    I don't understand what's going on, can anyone help me?
    If the hard disk is failing, do you think I could still recover some important files I added this week and had no time to back up?

    As an FYI, the only product on the market for drive/system testing on CoreStorage components on a "live" system to the best of my knowledge is Scannerz:
    http://www.scsc-online.com
    Don't go out and buy it, because that's likely not your problem. What the system is telling you is that you have an INDEXING problem.
    Consider the following: You go to a library and you want to find a book on a topic. How do you do it? Do you start at the first shelf you see and then sequentially search from shelf to shelf to shelf, possibly from hundreds of thousand (or even millions) of books until you find the book? Of course not. You go to the libraries catalog, look it up and then go to the right shelf. Hard drives use index files the same way. When a file is requested, the drive looks at its index, then moves directly to the sectors containing the information.
    Now, suppose you go to the library and you go to look up a book in the index files, and someone has stolen some of them (or if they're on a computer, they've deleted them...same thing). There's no information available at all. There's no way to find out where the books associated with the index files are. This is essentially what's happened to your hard drive. Some of the index files are corrupt, and in your case the index files that are missing are associated with the OS actually in the process of  loading, hence the failure to boot.
    This problem can be caused by the following:
    1. Some of the sectors containing the startup information are corrupt (essentially a drive failure).
    2. An application you have somehow or another managed to overwrite the indexing or startup files with information that doesn't make sense.
    Like I said, Scannerz is, to the best of my knowledge the only application that can currently test CoreStorage components on a "live" system which would be needed in your case because you're using fully encrypted volumes, but it's of little value to you at this point. Even if you mounted and booted from an external drive and ran Scannerz on it and it confirmed that the sectors in the startup section of the drive were bad, all that would do is identify the source of the problem for you, not correct it. There is no utility on Earth than can properly recover information from a completely damaged sector (although some claim they can ... they're lying) any more than you can recover information from a paper page that someone set on fire and burned to ash.
    The only option for you that MIGHT work would be Disk Warrior which can HOPEFULLY rebuild and remap the index files. Be forewarned of the following though:
    1. It can't perform miracles. It may or may not be able to re-generate the index files for you.
    2. It's a fairly old utility and how much they've kept up with changing technology, file system changes, etc. is unknown to me. Core Storage is NEW technology and I have no way of knowing how something like Disk Warrior will handle it. I would like to think they'll get around to dealing with it in the near future if they haven't already.
    Here's a link to their website:
    http://www.alsoft.com/diskwarrior
    I hope this helps you make your decision, and good luck!

  • HP Pavillion g6 hard disk test failure

    Hi!
    My HP laptop stopped working, I cannot get into windows but can reach the diagnostics tests at the startup sequence.
    The following was reporeted on a Quick Hard disk test:
    Smart Check: PASSED
    Short DSN: FAILED
    FAILURE ID: 9U0AJM-63570E-MFPX0J-60WH03
    PROD ID: B1J44EA#UUW
    Hard disk 1
    Hard disk test: FAILED
    I'm guessing I need to replace the hard drive ?
    Regards, 
    BigRedMachine
    This question was solved.
    View Solution.

    Hi,
    Unfortunately it does look like you'll need to replace the HDD - the error code for the short Disk Self Test ( DST ) would indicate that the Hard Drive is failing and needs to be replaced.
    The HDD is a warranty item, so if your notebook is still under warranty, contact HP ( with the 24 character error code ) and arrange to have the drive replaced - you can check your warranty status Here.
    If you live in the US, contact HP Here.
    If you are in another part of the world, start Here.
    If you are out of warranty and would like a guide on replacing the Hard Drive yourself, please let me know.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Hard Disk Drive Failure

    Hello,
    I recently tried updating my iTunes on my Pavilion g6 with Windows 8 and when it went to restart to complete the update, the computer never restarted.  I ran a diagnostic and this is what I get:
    failure id: U4VL7D-6GE74R-MFPx0k-60RU03
    hard disk short dst: failed
    product id: D1C00UA#ABA
    Would an iTunes update really have caused my hard disk to go bad?  I'm confused?  It seems as though, based on what I've read on some other posts, that I will have to replace my hard disk.  Could you provide a manual of how to do so based on my laptop and Windows 8 please?  Also, if I do so, will I lose all of the documents/pics/music/etc. I have saved on my laptop?  
    Thank you so much.

    Updating iTunes did not kill the hard drive...purely coincidental. You have to be doing something when it fails. 
    It is a G6-2320dx for anyone else looking in. Here is the Service Manual:
    Manual
    Page 44 shows physical hard drive replacement. Do you have the recovery disks the system asks you to make when the laptop is new? If so you can reload it to factory condition from those. If not, we can link you to a Windows 8 DVD image you can download which will install and activate automatically. Your Key Code is embedded in the BIOS and will be applied during Windows 8 installation. 
    Likely data can be recovered from the old drive. You just need a usb to SATA adapter like this to plug it in to another computer and copy and paste your files to another computer like yours when you get the new drive installed and loaded with Windows. All your drivers and factory programs are on the old drive as well as your music itunes settings etc. We can probably help you migrate all that over:
    http://www.amazon.com/Patuoxun-Converter-Adapter-Cable-Drive/dp/B008ASF5MC/ref=sr_1_1?ie=UTF8&qid=14...
    Here is a suggestion for a good hard drive at a very fair price:
    http://www.newegg.com/Product/Product.aspx?Item=N82E16822145587
    If you need something bigger or want to try one of the new solid state drives let us know. Don't be shy about posting back for more help.
    If this is "the Answer" please click "Accept as Solution" to help others find it. 

  • Hard Disk Imminent Failure

    I have had this laptop for a month and after about 2 weeks I received a message upon startup saying Hard Drive imminent failure. I've backed up all my data and ran the hard drive tests.<br>The hard drive tests immediately found a failure and gave me a failure ID but no resolutions.<br><br>I am currently using the laptop as normal but with an external hard drive plugged in for caution. The hard drive hasn't failed yet but the message still appears.<br><br>I am slightly confused at what is wrong and why it seems to of not resolved itself ?<br>Any help would be much appreciated ?
    This question was solved.
    View Solution.

    Hi Jake,
    You are probably still in warranty.  Make sure you've backed up your files externally and contact hp support.  You'll need a replacement hard drive.  Sorry to hear you've problems, glad they happened while you are covered.
    -wes
    I am an HP employee.

  • Boot to folder - hard disk fail - undetectable - what to do to recover data

    Hi all
    My Macbook Pro 13" (320GB Hard-Disk) 2.66GHz recently couldn't boot up. Had this question mark folder sign on a white screen, alternating with a no entry sign and the apple logo.
    My MBP had Lion OS loaded onto it. When i called Apple Help Line, they asked me to press alt/option, only Recovery HD was available, not Macintosh HD anymore. tried to boot up onto Recovery HD, but this was unsuccessful. So the Apple guy on the phone asked me to bring it in to an Apple Authorised Service Provider.
    Did so and the engineer diagnosis was: "tested with KGB HDD cable, unable to detect HDD, unable to backup data"
    they said it's likely a physical problem.
    I have a DVD of Disk Warrior 4.3 (http://www.alsoft.com/diskwarrior/)  - i wonder if i should try to use it , but am worried what it could do to reorganise the directory etc, thereby causing future problems, e.g. other more expert data recovery professionals from recovering data.
    DiskWarrior is not a disk repair program in the conventional sense. Instead of patching the original directory, it uses a patent-pending technology to quickly build a new replacement directory using data recovered from the original directory, thereby recovering files, folders and documents that you thought were lost and that no other program could recover.
    any one has any suggestions? should i utilise more professional services like http://www.datasavers.com.sg/index.php?
    the apple center quoted me a range of SGD 1000-2000 if they sent it to the Apple Data Recovery Center to try to recover the data..
    thanks in advance!

    thing is my timemachine (updated as of Oct 2011) also just failed!
    it's a Western Digital 1TB My Book Media
    - 1 partition is MS DOS FAT32 -- working well
    - other partition is Mac OS Extended (journalled) - which is my Time Machine stuff
    it can't mount
    this is message when i used Disk Utility's First Aid
    "Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files."
    thing is , i cannot even mount it, so how do i back up as many files as possible?
    hmm

  • HELP! Hard disk failing

    Hi
    Need help here.
    my iMac's hard disk is failing! I ran disk utility and indicated a fatal hardware and ask that I backup my drive.
    I am planning to buy a hard disk and run time machine. But I'm new to this. can someone provide a sep by step on what I need to do. I will have to buy an internal harddisk to replace the one in iMac too.
    Once I time machined my stuff. How do I get it transferred to the new HD?
    Also how do I make my hard drive a bootable drive? I am no expert in this.. please help.... SOON !

    It depends on how much data you change.
    My iMac has a 320gb drive and I use a 320gb external drive for backup which lasted about 4 months before filling up.
    Time machine works incrementally, so let's say you have 100gb of data on your iMac, the 1st backup will be 100gb. After that, let's say you update 1gb of files everyday, Time machine would add 1gb to the current 100gb each day, so tomorrow the total would stand at 102gb, then 103gb etc etc.
    Once the drive is full, it starts deleting the oldest information to enable it to continue backing up.
    I would say the best approach would be to get something at least twice the size of your 'stored' data, so if you have 250gb of data on your machine, then get at least a 500gb drive to give you a few months run before it starts deleting data from the backup.

  • Hp G61 hard disk fail

    The hard disk has failed on this laptop, I've run tests through startup and tried removing and replacing the hard disk but it will not load. I'm not too bothered about the laptop itself being recovered but there are files I can't access that I desperately want to recover. When I try to run a safe mode startup or a recovery startup it stops at loading the drivers for the hard disk.
    Is there anything I can do?

    When you run chkdsk on the drive, be sure to do it from a "elevated" command prompt i.e run cmd as administrator. So when you plug in the hard drive/usb adapter to the other computer the drive does not "mount" as a lettered drive and allow you to browse the contents with Windows Explorer?
    If you can figure out how to do it, as visruth suggests, the Linux thing has a good chance of success. Linux handles hard drives a little differently and corruption in the bootsector of the drive will not keep Linux from mounting it and allowing you to access it. Many times I can get data off a drive using Linux that was invisible to Windows. 

  • My Acer Aspire 3680 Hard Disk Failed

    How Would I fix a failed hard disk, and there's no Operating System on my Laptop,
    What should I do to fix the hard disk, I have no recovery cds at all, If I bring My Acer Aspire 3680
    To Best Buy will they fix it for free even though my warrenty is expired? Is that possible?

    Hi Casey
    If it is out of warranty, BB will charge to replace to drive, plus the price of the operating system cd's, plus the price of installing the hard drive and installing Windows.
    Do you get any error messages that shows the hard drive has failed? Does it make a loud clicking noise?
    The Acer 3680 was a very inexpensive entry level laptop. It might not be worth the money that BB will charge to repair it.
    **If you like my answer then click the little Star under my username.
    **If my response answered your question then click the Solved button. Thanks

  • Macbook Pro crashes then hard disk fail

    I'm a weathered mac user and have had macs for the last 15 or so years. I bought a new Macbook Pro 4 months ago and it has crashed more times than all of my previous macs together.
    A month after buying it with SL installed, the beach ball of death came up on the screen more often and then a day later the computer froze and the hard drive was corrupted. I reinstalled OSX and it worked fine (all data backed up using a time capsule phew!) until a month later it started getting slow again. I went to disk utility and this told me the hard drive need a repair. Then it tried to repair and said it could not and OSx could not be loaded onto the hard disk. Apple directed me to a service centre and replaced the hard drive.
    Then a week ago (Xmas eve to be precise) the same thing happened. The hard disk froze and said it needed to be repaired. I took it to a genius bar where the guy (who seemed knowledgeable) said that it was not a hardwear but a software problem and reinstalled OSx. Fair enough I thought and rather than using the migration assistant I dragged over my emails, photos and doc etc.
    If you've got this far well done! My problem now is that this evening it has once again started crashing for no apparent reason. I have no dodgy programs loaded, in fact all of them are on both mine and another mac. Two things have also happened, Front Row keeps loading up for some strange reason and I'm unsure why. Secondly the hard drive started making some really bizarre clicking noise whilst time machine was backing up.
    Has anyone any ideas what to do next or had similar problems?

    Well, if there isn't a hardware problem then there must be a software problem. Of course the diagnostics test may not detect a problem especially if it's random unless you run the test over a prolonged period of time - 24 hours, for example.
    If it is a software issue then I would start by doing the following:
    Extended Hard Drive Preparation
    1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Quit DU after formatting is completed and reinstall OS X.
    In answer to your firmware query: No, you cannot return to the previous version.

  • Hard Disk failing or not?

    Disk Utility lists one of my disks as "S.M.A.R.T. Status - Failing" but on another hard disk program ( Drive Genius 3) the disk's S.M.A.R.T. is verified.
    Soooo which one is it?

    DU does not check sectors or media or files or ... lots of the SMART fields.
    Number of retries for reads or writes is only one.
    A bad sector is the leading indicator of a failing drive.
    DU only checks and repairs the directory. And if you click on the top level of a drive (WDxxxxx for instance) it checks the partition tables and can make some changes but not to any blocks.
    There is a nifty program "SMART Utility" which has gotten good marks from people.
    http://www.macupdate.com/app/mac/24875/smart-utility
    I would read this on storage and what to know:
    http://www.macintouch.com/readerreports/harddrives/index.html

Maybe you are looking for