Hard disk metal cage/enclosure

Hey Guys, im gonna be upgrading my lenovo 3000 N200 (769) laptop hard disk drive soon. However, the metal casing that houses the hard drive in the laptop has screws that refuse to buldge. I donot wish to damage the hard disk, so is there anywhere i can get a simmilar enclosure/cage, for my new hard disk ?
Thanks in advance.
Solved!
Go to Solution.

For anyone else who may be having the same issue, heres what i googled, Note the use of the word "caddy".
http://www.google.com/search?hl=en&safe=off&rlz=1B3GGGL_enAE300AE300&q=lenovo+3000+n200+caddy&btnG=S...

Similar Messages

How to setup external 500GB Hard disk drive in enclosure

How easy is it too setup an external 500GB Hard disk drive (HDD) in enclosure? HDD is a brand new Western Digital 500GB HDD in an enclosure which has FireWire ports. The drive is not formatted.

Plug it in and use the Disk Utility in the /Applications/Utilities/ folder to format it as a Mac OS Extended (Journaled) disk.
(46625)

SATA Problem: Can see hard disks in USB enclosures, but not internal

I have a mid-2010 macbook pro 13". The other day, it crashed on wake-up, and would not boot. I had a OCZ Vertex SSD boot drive, and the OEM hard drive in an optibay enclosure (replaces the optical drive and used only for data). I used this setup for one year with no problems. After much troubleshooting, I found that I could see the SSD drive by booting into a recovery partition that I have on a USB stick, and putting the SSD in a USB enclosure. Then disk utility could see it, but not mount it. The label on the boot partition was "lion", but it changed to "disk1s2". I was able to repair the drive using disk utility, and then boot from it using the USB enclosure.
Once booted, I could still see the OEM hard drive with no problems. So I powered down and put the SSD back inside the case and rebooted. It booted in safe mode, but it booted fine. The next time I rebooted, it would not boot. I swapped the OEM drive and the SSD drive, and then the sytem booted with no problems and I was able to use both drives.
One day later, I noticed my OEM drive was no longer mounted in OSX. I took it out, put it in a USB enclosure, and OSX could see it fine. There were no errors on the disk. I put it back in the macbook and reboot but OSX couldn't see it.
So, the primary SATA port seems to be working intermittently. Three times now, a drive has stopped working on this port. Each time, I could use the drive in an external enclosure (or using the other SATA port normally used for the optical drive. Does anyone have any ideas? Could it just be the cable? It is the motherboard?
I'm trying to make this computer last at least another month or so because I need to upgrade to a larger model, and am holding out for the 2012 release.

Could be something as simple as the cable...they have been known to go bad. Got an Apple store nearby? If so, it's a cheap/easy replacement.

Hard disk drive: Samsung or Seagate ?

Hi all,
I am about to invest in 1TB disk for final cut express work and scratch area. The hard disk will be going in an external firewire 800 enclosure.
Samsung SpinPoint F1 HD103UJ 1TB Hard Drive SATAII *32MB Cache*
http://www.ebuyer.com/product/143288
Seagate ST3100340AS 1TB Hard Drive SATAII 7200rpm *32MB Cache*
http://www.ebuyer.com/product/134684
I think that Seagate used to have the edge here but reading some recent reviews sounds like the new kid on the block Samsung SpinPoint may be a better option.
Would like to know your thought about the following two disks?

Hi all,
Well I finally made a decision and boughts a Macpower FW800 enclousre which uses the Oxford 934 chipset and a Samsung HD103UJ 1TB Serial ATA 3.0 Gbps
buffer memory32 MB hard disk.
The enclosure is excellent quality and the disk access is very quick via FW800. The disk itself is very quiet and also great for Final Cut with my HD editing. Only noise the disk makes is upon power up other than that it is very quiet.
I have partitioned th disk into two 500GB's. One partition is used for time machine backups and the other is the Final Cut scratch space.
I plan to buy another enclosure and 1TB disk and parition into two 500GB's also. I plan to use one of the 500GB's for Super Duper clone of iMac system hard disk and the second for cloning/backing up the scratch Final Cut space. This second disk and enclosure will be my offline backup system and will not be powered all the time.
Details of the elcousre and hard disk are provided below. I purchased them in the UK. Enclosure was purchased from www.span.com and hard disk from www.ebuyer.com. Whilst span can sell disks in the enclosure you can save yourself a little money and buy seperatly from ebuyer and install yourself.
Enclosure:
http://www.macpower.com.tw/products/hdd3/pleiades/pd_scombo
Hard disk:
http://www.samsung.com/global/business/hdd/productmodel.do?group=72&type=61&subt ype=63&model_cd=249&tab=fea

Disk Utility error -9972 with new external hard disks

My Powerbook 15" (1.67MHz, 1.5 GB RAM, 100GB drive) is partitioned into two volumes:
- OS-X 10.3.9
- OS-X 10.4.3
Each volume has its own Disk Utility:
- Disk Utility 10.4.4 v.145.7 (part of OS-X 10.3.9)
- Disk Utility 10.5.3 v.198.5 (part of OS-X 10.4.3)
In order to make backups I use an external hard disk enclosure:
- Macally PHR-100AC, firewire + USB2
Recently I bought two new 250 GB hard disks and built one of them into the external enclosure (jumper setting to master) and connected it with firewire and formatted the drive as Extended Journaled. After that I made Verify Disk and got bad error messages and could not repair the disk.
Funny thing (reproduceable):
Using Disk Utility in OS-X 10.3.9 and formatting as Extended without Journaled: NO errors
Using Disk Utility in OS-X 10.3.9 and formatting as Extended Journaled: volume bitmap errors
Using Disk Utility in OS-X 10.4.3 and formatting as Extended without Journaled: bad errors
Using Disk Utility in OS-X 10.4.3 and formatting as Extended Journaled: bad errors
Using Disk Utility in OS-X 10.4.3 and formatting as Extended without Journaled and verifying using OS-X 10.3.9: bad errors
Bad error messages:
- incorrect key length
- the underlying task reported failure on exit (-9972)
- stopped repairing ... volume could not be repaired
I tried:
- to build the second new hard disk into the enclosure: same errors
- to install new firmware 4.73 into enclosure (compatible to 10.3.9): same errors
- zeroing out all data: same errors
- to use Techtool Pro 4.0.6 (compatible to 10.4): same errors
- to restart the mac using both partitions: different errors as described above
- to disconnect, shut down, restart the external enclosure: same errors
- to use another firewire cable: same errors
- to format the external disk again and again: same errors
- to find any discussion or knowledge base or faq: nothing
Thanks for any suggestions.
ibond

Your post on -9972 was very helpful. Thank you.
In the meantime I bought another enclosure (Macally PHC-500BC) and installed the same firmware 4.73 and tried to use it.
Surprise, surprise! Everything is ok with no errors. All my hard disks are working perfectly.
I suppose my 100AC is a faulty enclosure and needs replacement.
Thanks for your help.
ibond

Compatible USB enclosure for hard disk from a 15-inch Aluminum Powerbook

My old Powerbook finally bit the dust, so I dismantled it and removed the hard disk. I want to get an enclosure to use it as a USB drive, but do not know what size or type of enclosure to purchase.
I tried to guess, and ended up buying:
Connectland CL-ENC25005 2.5-Inch Light Weight USB 2.0 Interface SATA HDD External Enclosure
http://www.amazon.com/gp/product/B0028Y4D9U/ref=oxya_ohproduct
When I got it, the connector in the enclosure was too small for the number of pins on the hard drive. Can somebody recommend an appropriate USB enclosure to use with an old Powerbook hard disk?

Hi, jakshale, and welcome to Apple Discussions. Your Serial ATA (SATA) enclosure isn't what you need, as you've guessed; your drive is a Parallel ATA (PATA, also called IDE) unit and needs an enclosure designed for that interface. Any enclosure intended for 2.5" ATA/IDE/PATA notebook drives will work. Here's one that's almost as dirt cheap as the one you bought:
http://www.newegg.com/Product/Product.aspx?Item=N82E16817106093
Note that if you intend to use the newly-repackaged drive with a Powerbook, a USB-only enclosure isn't a good choice unless you get one that can use its own AC adapter. This is because most Powerbooks don't supply enough power through their USB ports to power an external drive. The same Powerbooks do supply sufficient power through their FireWire ports, so an enclosure that can be connected via FireWire is a better choice. If you're going to use the drive with a desktop Mac or an Intel MacBook instead of a Powerbook, a USB enclosure should be fine.

Hard Disk enclosure, which?

Hi.
My old iMac Flat Panel just died, the logic board doesn't work. Buying a new one was very expensive and I decided to jump to a new Mac. But since only the logic died I decided to save the hard drive, which is a Maxtor 4d060h3.
My question, can I buy a hard disk enclosure 2.5 to plug this hard disk or it must be a 3.5? I don't know how to see which one I must have.
Thanks.

I'd also respectfully add that it needs to be an IDE/PATA enclosure that your get not SATA.
mrtotes

How do i retrieve file vault protected files from an external hard disk that used to be my mbp's hard drive? the hard disk got corrupted and will no longer boot. I put it in an enclosure and attempted to copy my files but failed because of FV encryption.

This external hard disk used to serve as the main drive of my mbp. It got corrupted and the OSX would no longer load. I upgraded to a 500gb hd and used the old hd as an external drive. I tried to copy my files but i could not access them because of the filevault encryption. 110gb of hd space appears as used which means that my files are still in the drive. Is there a way to retrieve these files? thanks

According to your post, you're using Leopard, so FileVault only encrypts your user folder (unlike Lion). On the mounted external drive, in your user folder, you should see a file called username.sparsebundle, with username being your user name. Double-click that file to open it and it should prompt you for a password. Type in your password and the file will mount as a volume in Finder. You should be able to copy all of your files over.

Unable to capture files into external hard disk because of 'drop frames '

I haven't been able to capture footage from my DV camcoder thru firewire to an external hard disk in FCP because i get a message saying 'drop frames were detected'.
This happens when i selected this external hard drive as the scratch disk in FCP.
When i deslect it and select my user hard disk as the scratch disk, the capturing works perfectly. But i just want to capture all my capture files into the external hard disk, not my user hard disk.
The external hard disk's speed is 3500 - could that be the problem? Is it too slow? Its connected thru USB and it is Mac Os Extended Journaled. Its got 250gb of space, so that's not the issue.
Can anybody help me?
Thank you.

No, its a Panasonic gs180, a really good camera.
The camera itself is connected to my computer through firewire. Its the hard disk enclosure that is connected to my emac through USB. Anyway, i'm sure that's not the problem, casue like i said, the capturing works fine when i use my user hard disk as the FCP scratch disk.
The problem i have is when i try to capture footage from my camera to the external hard disk enclosure. When i press 'capture now' and press play, the playback stutters and a messsage appears saying, "drop frames detected" and the capturing stops.
I feel like i need to adjust something in FCP itself - like a preference or something - just not sure what.
Thnx for your suggestion though and if you know what i should do, please let me know.

How to delete files from external ntfs hard disk [Solved]

Hi guys
first, sorry for my bad English.
I have an external hard disk ( WD 500GB ) with ntfs file system and i have installed ntfs-3g package.
3 days ago, when i wanted to delete some files, i get a problem with it,
look the output :
[jahangir@Arch New Metal]$ sudo rm *
[sudo] password for jahangir:
rm: cannot remove '02 - Korn - Love and Meth.mp3': No such file or directory
rm: cannot remove '30Seconds To Mars': No such file or directory
rm: cannot remove '30Seconds To Mars 1': Is a directory
rm: cannot remove 'Avantasia': No such file or directory
rm: cannot remove 'Avantasia 1': Is a directory
rm: cannot remove 'Avantasia 2': Is a directory
rm: cannot remove 'Behemoth': No such file or directory
rm: cannot remove 'Behemoth 1': Is a directory
rm: cannot remove 'Hanging Garden - At Every Door - 2013': No such file or directory
rm: cannot remove 'Hanging Garden - At Every Door - 2014': No such file or directory
rm: cannot remove 'Rosetta': No such file or directory
rm: cannot remove 'Rosetta 1': No such file or directory
rm: cannot remove 'Sepultura': No such file or directory
rm: cannot remove 'Sepultura 1': No such file or directory
rm: cannot remove 'Slipknot': No such file or directory
rm: cannot remove 'Slipknot 1': No such file or directory
rm: cannot remove 'Tokio Hotel': No such file or directory
rm: cannot remove 'Tokio Hotel 1': No such file or directory
rm: cannot remove 'T\303\275r': No such file or directory
rm: cannot remove 'neww': No such file or directory
[jahangir@Arch New Metal]$
Who can help me ?
I wanted to delete .trash-1000 file from my main directory hard dist and i confront with this error :
[jahangir@Arch My Passport]$ sudo rm .Trash-1000
[sudo] password for jahangir:
rm: cannot remove '.Trash-1000': No such file or directory
[jahangir@Arch My Passport]$
In the event that it is there.
also in main directory of my hard disk i have 1 mp3 file that i can't view it in file manager and it will be displayed in Windows OS and with ls command in terminal :
[jahangir@Arch My Passport]$ ls
ls: cannot access 01 - Lost.mp3: No such file or directory
ls: cannot access 02 - Surrendered To The Decadence.mp3: No such file or directory
01 - Lost.mp3 In The Name Of God Videos ZzZ - IMAN winold
02 - Surrendered To The Decadence.mp3 New Metal World of Warcraft Cataclysm 4.3.4 enGB navid wow wrath
[jahangir@Arch My Passport]$
what is this file and how can i delete .Trash-1000 and this files and content of "New Metal" directory ?
Last edited by jiros (2013-12-23 20:57:05)

I believe you used ntfs for a reason. As far as I know, Windows isn't friendly with hdd filesystems others than fat or ntfs, so once you format your external harddrive to ext4, windows won't talk to it at all, unless you install some additional driver or software.
You have several possibilities to do:
1) You could use FAT32, it's kind of a dumb filesystem, linux, mac and windows can read and write to it, there are some limitations like file permisions or 4GB file size limit.
2) You could make multiple partitions on your external harddrive, one with ntfs (for windows) and the other with some fs that is support natively in Linux and Mac, I believe only option would be HFS+. I'm not an expert, maybe somebody will correct me. Anyway, if you aren't going to connect your disk to Mac, than ext4 would be a good choice. But this approach with two different partions is kind of dumb, because usually you need the same data available on whatever platform.
3) If I were you, I would continue using NTFS or FAT32. It's not ideal, but it's a price you have to pay for dealing with Windows systems.
4) If there is any other smarter solution, I believe somebody will add it to responses bellow.
Anyway, it's weird that your problem persists. There has to be something wrong with your filesystem, otherwise ls wouldn't show you question marks in its output. Did you perform chkdisk via GUI? It has to say that either there wasn't any error with your fs, or that there was some error. We live (unfortunatelly) in binary computer world. I mean you can perform that command from shell, or however microsoft calls it, and if you run it in a proper configuration, it will tell you whether your fs is bad or not and perform needed repairs.
And how to format disk to ext4?
Backup your data, run as root fdisk /dev/yourexthdd (fdisk /dev/sdd), delete all partitions, create new ones, once you are done, write changes down. fdisk is pretty easy to use, don't be afraid of it. Then you have to create filesystem on each partition you created with fdisk, so if you created only one, run mkfs.ext4 /dev/yourexthddwithpartnumber (mkfs.ext4 /dev/sdd1). There are nice articles about doing these things on Arch Wiki (https://wiki.archlinux.org/index.php/File_Systems), don't be worried to read them

How I installed Mountain Lion on Un-repairable Hard Disk.

My Recommendations for Avoiding Trouble, Avoiding Risk, and Saving Time.
1) Make a boot clone first!!!
      http://www.bombich.com/
http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
2) Fix and repair your hard disk with Disk Utility and fsck_hfs before installing Mountain Lion!
    (Otherwise the installer will write-lock the disk preventing repair.)
Mountain Lion Aborted Installation—Claimed Hard Disk Failed, Couldn't be Repaired, and Should be Replaced
I have a 2011 MacBook Pro. Installation of Mountain Lion aborted claiming the hard disk could not be repaired by Disk Utility, should be backed up immediately, and replaced. It didn't make sense that the drive was booting up the computer for installation, but needed replacing. I removed the drive, put it in an external enclosure, and backed up the drive using a working Mac Mini, and Carbon Copy Cloner.
Hard Disk Was Write-Locked—Not Failing
Booting in Single User mode (hold command and S keys down while bootup is proceeding). I then typed in the fsck command given after Single User bootup. It informed me the drive was write-locked and read only. Now things were starting to make sense. Disk Utility couldn't repair the drive because it was write-locked! Maybe it could have been unlocked by the "chflags nouchg /Volumes/volume" or "chflags noschg /Volumes/volume" commands (http://hints.macworld.com/article.php?story=20031017061722471), but I didn't try it. Unlocking the drive is really worht a try because it could save hours of coppying through a slow USB interface.
I formatted my laptop drive after copying it to another large external drive. Then I used Carbon Copy Cloner to clone Snow Leopard from my Mac Mini to my freshly formatted original laptop drive. I unsellected the "Users" folder so I would only get the operating system—saving lots of hours copying data I don't need. Then I put the drive back in my laptop, and it booted with Snow Leopard. Checked the volume with Disk Utility and was informed the drive is fine. I removed the drive and connected it externally to my Mac Mini and ran fsck_hsf a few times in the terminal, which showed problems were found and fixed.
sudo fsck_hfs -fy /dev/rdisk1s2
Password:
** /dev/rdisk1s2 (NO WRITE)
   Executing fsck_hfs (version diskdev_cmds-491.6~3).
** Verifying volume when it is mounted with write access.
** Checking Journaled HFS Plus volume.
** Checking extents overflow file.
** Checking catalog file.
** Checking multi-linked files.
** Checking catalog hierarchy.
** Checking extended attributes file.
** Checking volume bitmap.
   Volume bitmap needs minor repair for under-allocation
** Checking volume information.
   Invalid volume file count
   (It should be 550614 instead of 550591)
   Invalid volume free block count
   (It should be 175459733 instead of 175460263)
** The volume MacBookPro HD was found corrupt and needs to be repaired.
3) sudo fsck_hfs /dev/rdisk1s2
Password:
** /dev/rdisk1s2 (NO WRITE)
   Executing fsck_hfs (version diskdev_cmds-491.6~3).
** Verifying volume when it is mounted with write access.
** Checking Journaled HFS Plus volume.
fsck_hfs: Volume is journaled. No checking performed.
fsck_hfs: Use the -f option to force checking.
[karl_ihrig] 4) sudo fsck_hfs -f /dev/rdisk1s2
** /dev/rdisk1s2 (NO WRITE)
   Executing fsck_hfs (version diskdev_cmds-491.6~3).
** Verifying volume when it is mounted with write access.
** Checking Journaled HFS Plus volume.
** Checking extents overflow file.
** Checking catalog file.
** Checking multi-linked files.
** Checking catalog hierarchy.
** Checking extended attributes file.
** Checking volume bitmap.
** Checking volume information.
** The volume MacBookPro HD appears to be OK.
5) sudo fsck_hfs -fy /dev/rdisk1s2
** /dev/rdisk1s2 (NO WRITE)
   Executing fsck_hfs (version diskdev_cmds-491.6~3).
** Verifying volume when it is mounted with write access.
** Checking Journaled HFS Plus volume.
** Checking extents overflow file.
** Checking catalog file.
** Checking multi-linked files.
** Checking catalog hierarchy.
** Checking extended attributes file.
** Checking volume bitmap.
** Checking volume information.
** The volume MacBookPro HD appears to be OK.
6) sudo fsck_hfs -fy /dev/disk1s2
** /dev/rdisk1s2 (NO WRITE)
   Executing fsck_hfs (version diskdev_cmds-491.6~3).
** Verifying volume when it is mounted with write access.
** Checking Journaled HFS Plus volume.
** Checking extents overflow file.
** Checking catalog file.
** Checking multi-linked files.
** Checking catalog hierarchy.
** Checking extended attributes file.
** Checking volume bitmap.
** Checking volume information.
** The volume MacBookPro HD appears to be OK.
I put the drive back in the laptop and repeated the fsck commands after a Single User boot. (Omited the sudo commands and used /dev/disk0s2.)
Downloaded and Successfully Installed Mountain Lion on "Unreparable" Drive
I downloaded the Mountan Lion installation application to my laptop, ran it, and had a smooth install.
More Trouble Migraiting My Applications and Directory
I expect to use up more time changing my computer name, migrating applications and rsyncing my User Directory. I will post how I achieve this.
I Hope People Avoid Trouble and Problems are Solved
I hope everyone will avoid trouble by making boot clone of their whole disk before attempting an install of ML and repairing their disk with Disk Utility and fsck before ML installer prevents it with a write-lock. Please see the first section.
I hope this solves other peoples problems with 'unreparable' disks. I believe this proves disks are repairable when ML says otherwise.
Good luck everyone!

troca, you certainly helped dtigerbme! Isn't that encouraging?
I recommend you copy your drive as soon as possible. I really don't think the drive is bad, but you may have to format it and copy back to it. Hopefully not. Clone or backup the drive before trying this recipe. Any time you have errors on a drive, back it up. A failing drive has lmited life. However, I don't think these drives are really failing, but that is my opinion and I break a lot of things.
Let's try this recepie for you:
Start in Single User Mode. Power on while holding the Command + S keys.
At the prompt, type "fsck_hfs -fy" or "fsck -fy" and hit return.
Do it again.
Enter the command "reboot".
Just googled "volume count disk utility" and got the same recipe to fix it.
http://counterjumper.com/post/19265700171/how-to-fix-invalid-volume-free-block-c ount-error-in
So my recipe is to try to fix the drive without taking it out of the computer, which requires you can boot it up.
troca it looks like Apple has said that error is benign and can be ignored in 2010.
http://support.apple.com/kb/TS2028?viewlocale=en_US&locale=en_U
I do believe fsck will fix it though.
Some other results from the same search:
http://forums.macrumors.com/showthread.php?t=1071850
https://discussions.apple.com/thread/3635034?start=0&tstart=0

ITunes cannot write to my lacie hard disk

I have an iMac G5 that I recently upgraded to 10.4.10. I've had a 160 firewire lacie hard disk for over a year, and all of my iTunes content is stored and called from that device.
beginning today, I cannot add to my library, I am getting an error that says cannot read from or write to that lacie hard disk.
I've tried manually copying the files over via the Finder, and that is yielding an error (error code -36).
any thoughts? I've also had iChat problems since introducing 10.4.10, wonder if that's part of the problem.

I have an iMac G5 that I recently upgraded to
10.4.10. I've had a 160 firewire lacie hard disk for
over a year, and all of my iTunes content is stored
and called from that device.
beginning today, I cannot add to my library, I am
getting an error that says cannot read from or write
to that lacie hard disk.
I've tried manually copying the files over via the
Finder, and that is yielding an error (error code
-36).
Error -36 is an i/o error. This means that you almost certainly have a hardware problem. This might be with the FireWire cable; replace the cable. It might be with a FireWire port on the disk; put the cable into a different port. It might be with the FireWire port on the Mac; try a different port. It might be with the FireWire controller on the Mac; try a different Mac. It might be with the FireWire controller on the disk; put the disk into a different enclosure.
Unfortunately, what it's most likely to be is with the disk itself. I hope you have a backup.
any thoughts? I've also had iChat problems since
introducing 10.4.10, wonder if that's part of the
problem.
Unlikely.

Upgrading To A New Hard Disk Migrating Data

Like many old MacBook users right about now, we're all thinking about upgrading our 60 or 80 GB OEM hard drives. Well, I went and did it and I have a few questions after-the-fact, not to mention documenting my experience.
First I chose the Seagate Momentus 160GB 7200.2 (ST9160823ASG). This replaces the OEM Seagate Momentus 80GB 5400.2 (ST98823AS). The reason for this is simple ... the OEM drive worked flawlessly and I was willing to spend a little extra to ensure continued performance. I also chose to bundle it with a CMS USB 2.0 external enclosure data transfer kit to re-use my old drive.
My first surprise was that the CMS auto-transfer software was Windows only, despite the fact they make a Macintosh back-up product. The second surprise was that there was no Apple auto-transfer options. I literally spent an hour searching the Apple website and built-in help and tutorials to find a way to do this. Thanks to all on this discussion website as I ended up choosing a third party "clone" software to copy my old drive.
Which brings me to my first question. Every-time I tried to use Disk Utility to make a disk image of my old disk, I got the response that the disk image failed because resources were in use. Is that normal? Is there a way to make a back-up disk image using included Apple disk utilities? If not, then Apple NEEDS to spell it out, rather than a one line blurb in the disk install manual they publish that says basically: first back up your data. Thanks Apple, big help.
So I ended up using Carbon Copy Cloner, for a variety of reasons. A. it's $5 shareware and B. it specifically got better reviews than SuperDuper ($27). As far as I can tell, Carbon Copy Cloner did an exceptional job of perfectly backing up my old HD. BUT ...
Now here comes the next question ... the CMS enclosure seemed fine, but between CarbonCopyCloner and the USB 2.0 interface, it took over 9 hours to make a disk image of my old hard drive!!! Is THAT normal? Would a Firewire interface have sped this process up? Is SuperDuper faster? I must admit when I then used Disk Utility to restore the disk to the new drive, it took another 6 hours, so my guess is it wasn't the software's fault. Maybe it just takes a **** of a long time to move 80GB data. If the USB 2.0 interface is the bottleneck, then I highly recommend paying extra for a firewire enclosure. Would love to get a definitive answer here.
The process of installing the drive was simple. Thank you Apple (seriously). The new drive booted right up and the system is as zippy as ever ... but you knew it was coming:
The new 7200 rpm drive ran smoothly and absolutely silently in the external enclosure when I was backing up the old HD. Once installed, I immediately noticed a new vibration. Nothing huge, but it's there when now it wasn't on the OEM drive. The whole MacBook vibrates, stem to stern. The drive also seems hotter under my palm. Seeing all manor of these "VIBRATION" issues on other posts, I would suggest that anyone upgrading to a new drive, install the HD first to ***** the level of vibration before going to the lengthy duplicating process. It also seems to spin constantly, which the 5400 may well have done too but was otherwise unnoticeable.
My question here is, since these drives are virtually identical, does the 7200 rpm cause the added vibration & heat not present on the 5400, or could I have less-than-optimal drive which might be improved with a different drive? Also, the last time I had a high vibration drive on my PowerBook G3 it continued to get worse over the course of a year and Apple finally replaced it under Apple Care.
All-in-all it was a simple and relatively straightforward process once I found all the pieces, that is and Apple did not make it easy. I chewed up a lot of time I did not have looking for instructions. I've been using Macs since the original Macintosh in 1984. Ah I long for the days when I could just open a disk, insert another, select all and drag the contents to a new disk and voila! An exact copy of the original. Apple finally gets an A+ for RAM & Drive upgrade accessibility. But they get an F for making the data migration process as complicated as possible, particularly for something as important as our data. I'm sure their strategy is for everyone to take their computers to the Apple Store for upgrades and anyone else should already know how to do it. Well, I would suggest that most of us fall somewhere in the middle. We can put the new drive in and backup our data, but like making a good cake, we need the recipe.

Doug, I appreciate your input, however re-installing OSX is exactly what I DON'T want to do. Not only would it take an extended amount of time to update from 10.4.6 to 10.4.10 but importing files from the old hard disk comes nowhere near copying over every modification I've made to my system. The idea here, as I would think with anyone upgrading their hard drive with a perfectly working system, is to increase disk space and just keep right on going without missing a step. WIth all due respect your suggestion is absolutely the wrong advice in this situation. The last time I took such advice, I found myself missing many of the system helper applications allowing me to access hardware and software and all of it had to be reinstalled as I discovered things were no longer working as they should have. I DO NOT recommend re-installing OS X to anyone wishing to upgrade their drive, unless you are having problems with your system or just want to clean house. Apple should understand this. The bug thing on the install disk is just one of the many headaches involved in this process. My understanding was that I cannot make a disk image from the install disk was well as being unable to restore. However, if that's possible, then I could have done what I wanted without using a third party "shareware" solution. I will check it out and report back. Call me paranoid, but I would prefer to keep my data backup in the hands of those who formatted it originally, i.e. Apple. I would happily use a proven commercial utility, but for something as routine as upgrading my hard disk, I shouldn't have to pay to do it. Time was, if Apple had a bug in their startup utility disk, they would have corrected the error and sent a replacement to all registered users. Time was.

2.5'' sata Toshiba Hard disk not detected

Hi everyone, recently I bought a ssd drive for my macbook and formatted my original Toshiba hard disk I bought a box for hdd and when I plug it to usb as external drive it cannot be seen by mavericks.I tried disk utility ,it cannot also see. I tried in other operating systems such as windows 7 and ubuntu 12.
When I plug the disk into its original place in laptop it works else it is invisible.By the way I formated it as journaled I did not expect windows to recognize but non of the systems see it.

Karina_ wrote:
I bought a box for hdd and when I plug it to usb as external drive it cannot be seen by mavericks
It sounds like the new enclosure or the connection is bad. It happens.

Spare hard disk tray and rubber stops for X201

Hi
I have a Lenovo Thinkpad X201. Due to the nature of my work I am frequently required to boot up from a variety of operating systems. Recently, to protect integrity of the OSes, I moved out Ubuntu onto a spare HDD so now I have two hard disks - one that boots into Windows 7 and another that boots into Ubuntu. The problem is that if I connect the Ubuntu hard disk via USB for bootup, it is death slow and I have had instances where the hard disk developed bad sectors because the USB cable came loose and disconnected the drive. The only other option I am using currently is to manually swap the internal HDDs every time I need to change OSes. I was wondering if I can purchase a spare hard disk tray with its rubber mounts so that all I need to do is unscrew the hard disk bay cover (one screw) and swap the drives rather than have to unscrew the entire assembly and then screw it onto the other HDD repeatedly.
Could somebody please provide me with an FRU number for the entire SATA HDD assembly (minus the HDD itself of course but including the rubber rails).
Thanks
Sid
Solved!
Go to Solution.

i am not affiliated with any of these sellers.
http://www.ebay.com.au/sch/i.html?_odkw=t60+hdd+drive+tray&LH_BIN=1&_osacat=0&_from=R40&_trksid=p204...
You can use the metal tray, rubber bumper and plastic bay cover.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Hard disk metal cage/enclosure

Similar Messages

Maybe you are looking for