Hard disk not recognised - will not boot from cd & No FW Target Disk mode

hi,
some help would be greatly appreciated.
Some time ago i was switching internal hard drives around and wound up with a kernel panic of some sort (see my previous posts).
following on from this I have tried FW target disk mode with no success, and it will not boot from a retail Tiger install disc (this machine has tiger installed (i think!). I can't force a boot from the optical drive and i also can't even force it to eject the disc inside to try another install DVD/CD (I have panther discs lying around also).
when i start up with the c key nothing happens, but when i start up with the alt/option key i get a closed padlock symbol, password entry field and a "right facing arrow" button.
anyone got any clues with this? i'm guessing it could either and/or be an internal hard drive ribbon failure (i have swapped internal HDs multiple times in this machine, which can't be good for it) or the familiar PRAM problem (although why would it not boot from an install DVD if this was the case?). I have changed the power supply unit in the past due to having a power cable snap off inside the original one - damage to PRAM caused by this?
help would be muchly appreciated!
Jesse

Hi, Jesse. Remove the hard drive and its cable, then see whether you can start up from a CD or DVD. If that works, replace your hard drive cable.

Similar Messages

  • 2008 MacBook Pro won't boot from Leopard DVD or Target Disk

    Yesterday I was working on my MacBook Pro. I use FontExplorer to manage fonts. I ran the conflicts diagnostic looking for missing font files, which returned about 200 results (I was expecting this). I've moved the fonts installed by Adobe/Microsoft out of my fonts folder in my user library (user library, not system). For some reason the computer started to become very slow, to the point of beachballing. The freezing seemed to start and stop. I was able to close FontExplorer and Illustrator without force-quitting. I tried to shut it down gracefully at that point but it froze up again, so I hit the power button to force a restart. It started up but now it hangs on the gray screen right before the Apple logo. The logo doesn't come up, I can hear the drive spinning as normal but it doesn't do anything.
    I've tried booting from a retail copy of the Snow Leopard, but it doesn't work. I can hear the disc spin up in the DVD drive as though the computer is about to read it, but nothing happens. It just stays on that same blue screen. I've tried booting my MBP in Target Disk mode from my iMac. The target disk icon appears, however it just sits in the middle of the screen and my drive doesn't mount on the iMac. I've noticed now that the white status light on the front of the MBP (on the latch) doesn't come on, and if I cover the speakers the backlight doesn't turn off.
    What do I do now? I have an enclosure I could use to try and boot the MBP's drive from, but I'm running out of options. I'm really starting to worry about my data. I have a major school project that's already late which is on there, and I don't have a recent backup. If I don't hand it in... let's not go there. I don't understand how this could happen; I take very good care of my computer, I turn it off when it's not in use, and I run Cocktail on it once a day which does a SMART status check.
    Help?

    sig,
    The first thing I tried was booting from the install disk. The 2008/2009 MBP's aren't able to boot from a retail DVD of Snow Leopard, which is why I ended up using the original hardware-specific install disk that shipped with my computer. That didn't boot either. I was able to view the drive in Disk Utility when it was in the enclosure, but the partition with my data on it would not mount. I attempted a repair disk on the drive but that failed. It wouldn't mount in Terminal either. I considered trying to rebuild the volume catalog using TechTool Pro but there's the possibility that could actually make things worse. So I've taken it to the repair shop. They're running it through DiskWarrior overnight, last I heard there were 60-something thread errors. Yesterday my SMART status was fine, today my drive is dead. What happened? Hoping for the best (but expecting the worst).

  • Can u boot from a Mac in target disk mode

    I'm wanting to know if I put a Mac mini in target disk mode, can I boot from that Mac mini from my MacBook Pro. I'm wanting to set up a mini as a server but it may have to be the basic and ill install server on it but I prefer to do it without using a monitor. I'm curious to know if its possible.

    You don't need a monitor with the MM, and neither boot in Target Mode. Like me, use screen sharing for remote access over the network:
    On the MM, -> System Preferences -> Sharing, there check Remote Management and choose which user, if not all, may have access. If you're not the only one, you can limit access for each user under Options.
    Under  -> System Preferences -> Energy Saver, it makes sense to check Wake for network access.
    Then you can log out from the MM, leave it sitting at the login screen and turn off or disconnect its screen.
    On the remote Mac, open Finder and find the MM under Shared. Click in it, then on Share Screen. You'll need to enter the login credentials for your account on the MM, eventually save it to your Keychain. Then your MM's login screen should appear in a window on your remote Mac. You have now full access to the MM.

  • Disk startup full- can't boot normally. Now in target disk mode.

    Hello all, so here's my dilemma-
    My disk startup is full and now I am unable to boot my computer past the apple logo and the loading circle.
    Here's what I've tried,
    I am now in target disk mode attempting to transfer over my files to an external HD via a good computer and then wipe/restore the OS on my bad computer THEN transfer my files over to the bad(now good) computer however..... some of my files won't transfer, especially in my iphoto library (It's HUGE 82 gigs) & my very elaborate final cut pro projects that have taken me h o u r s to do.... For example, some video icons don't show up with a snapshot of the video as they are suppose to but instead they're shown with a a default video icon which almost makes me think they're damaged files but the thing is- I was just working with these files.. My comp passed all HD tests. I don't think it's damaged...I don't know what's going on. If I could just find a way to delete some files...especially from my trash(30 gigs in there) so I'm able to at least  boot properly, that would be great
    Is there anyway to retrieve these stubborn files via target disk mode or another option?
    Also do you maybe have an easier way for me to go about this entire process instead of transferring 500gb of data back and forth? I tried to access my trashcan via target disk mode and delete the 30 gigs I have in there but I was unable to delete it- and I do have "read and write" switched on.
    Thanks in Advance!! ANY help is appreciated. I'm at wits end here.
    Details
    -I have a mid 2012 macbook pro connected with the mid 2012 imac that I'm running on target disc mode via thunderbolt cable (I also tried a 2013 air- same issues)

    Before you spend a lot of money with a professional recovery service, look over these links:
    http://support.apple.com/en-us/HT201583
    http://www.thexlab.com/faqs/trash.html
    Ciao.

  • Disk utility's will not repair permission launch from option V 1.0(53)

    Disk utility's will not repair permission launch from option V 1.0(53)

    What is Option V in reference to? What happens when you attempt to repair permissions? Please describe your issue in more detail. Thanks.

  • Using Mac OSX Install Disc 1, I am not able to get any further than the Partition tab.  It allows me to select my hard drive selection, but will not allow me to make any other selections.  Does anyone know their way around this obstacle?  Thanks!

    Using Mac OSX Install Disc 1, I am not able to get any further than the Partition tab.  It allows me to select my hard drive selection, but will not allow me to make any other selections such as options.  Does anyone know their way around this obstacle?  Am I doing anything wrong?  Thanks

    Hello, The Hatter, I read about the 'trick' of backing up, erasing, and restoring too, but I figured it would take longer than defragmenting the disk.
    But the defragmentation process has just finished! so I'm gonna try to run Boot Camp again soon!
    Thanks for your helpfulness, anyway.
    And P.S. I didn't clone my system onto the external drive, I just inserted the Mac OS X Install CD, rebooted holding down the "C" key, and installed a fresh Snow Leopard system onto the predetermined partition. I will use that in cases of emergency, when my main/internal system becomes unusable.

  • Disk full.  Will not reboot

    While exporting a large number of pictures from iPhoto on an external drive to a folder on my desktop, my system froze. I think it ran out of disk space. I had to manually power off. When I rebooted, I got only a grey screen with a tiny finder window/question mark in the middle of the screen. I booted from CD and have run disk utility, but it sits for a very long time 30 min+ 'getting disk information'. I have tried this several times. I was thinking of reinstalling the OS, but when I go to the install option, there is no HD displayed to install to. I went into terminal window after booting from CD and found that /.vol and both /dev were at 100% - not good I'm sure. It will not boot into Safe Mode. Any suggestions where to go from here?
    17 " G5   Mac OS X (10.4.7)  

    I am embarrased to say, I do not have a backup of HD.
    I have an external drive where I keep all my
    pictures. If I have to reformat, the only important
    thing I will loose is iTunes. Can I replace the
    drive with a new one, place the old internal drive
    in an enclosure and reattach is to retrieve data?
    Maybe. It all depends on exactly what is damaged with the drive. If you do that Prosoft's Data Rescue available at http://www.prosofteng.com/products/data_rescue.php is the best tool. You can download a demo copy to find out what it will be able to recover. If you want to actually do the recovery then you must pay for a license.
    Is it possible DiskWarrior is sitting too long
    between the time it completes the rebuild and I
    start the replace? I have been running the rebuild
    overnight so I think it may be sitting 'idle' for
    several hours.
    I never heard of a problem like that with DiskWarrior. I have been called away and left it sit for hours waiting for me to return. When I answered the request to replace the directory, it did.
    The system also attempted to
    'logout'. Could the firewire connection go
    inactive? I have corrected the logout issue and
    plan to try again.

  • MSI E350IA-E45 USB Not recognised after cold boot.

    Any one else have the same issue? My asus (Bluetooth) BT211 is not recognised after cold boot.
    I also found the front USB's losing power when PC turned off. Connected them up to 5VSB to fix the issue.
    MSI tech has not been back to me if this is a fault design, My motherboard issue or bios issue? Which also means to charge via front USB not work when turned off.
    And to top it off I cannot find an answer to whether the Wake on Bluetooth USB is supposed to work? 

    Quote from: mickas on 12-August-11, 20:09:58
    I also found the front USB's losing power when PC turned off. Connected them up to 5VSB to fix the issue.
    How did you connect up the USB ports to 5VSB?
    I have a similar issue with a newer MSI board and my USB mouse; I'd have to remove and re-insert the USB connection to the mouse after each cold boot in order for it to be recognized. I did a kludge fix by looping the mouse through a powered USB hub that supplies power to connected devices even when the PC is off.
    This MSI board doesn't have a hardware jumper to enable 5VSB to the USB ports, unlike other motherboards. Also, none of the "green" or wakeup settings in the BIOS would cause the USB ports to have power when the PC is off.
    So, how do you connect 5VSB to the USB ports? I've heard that crossing the regular 5V rail with 5VSB is a no-no, so I can't imagine how you did it.

  • I am trying to re-install CS3 after having to replace my Hard drive, but it will not accept my serial

    I am trying to re-install CS3 after having to replace my Hard drive, but it will not accept my serial #. How can I get it to allow me to continue using my software?

    If you had registered your CS3, you can get the serial number from your Adobe account when you log in through the Adobe corporate web site.  Just go to My Products to find it in your account.
    Adobe applications show you a truncated s/n to discourage software piracy.  Legitimate Adobe s/ns have 24 digits.

  • I can't copy iPhoto to my external hard drive. It will not allow me to drag and drop or copy and paste., I can't copy iPhoto to my external hard drive. It will not allow me to drag and drop or copy and paste.

    I can't copy iPhoto to my external hard drive. It will not allow me to drag and drop or copy and paste., I can't copy iPhoto to my external hard drive. It will not allow me to drag and drop or copy and paste.

    NTFS is your problem.
    iPhoto needs to have the Library sitting on disk formatted Mac OS Extended (Journaled). Users with the Library sitting on disks otherwise formatted regularly report issues including, but not limited to, importing, exporting, saving edits and sharing the photos.
    See this article
    http://support.apple.com/kb/TS5168
    for more. Note also the comment:
    “Additionally, storing the iPhoto library on a network rather than locally on your computer can also lead to poor performance or data loss.”

  • I have a external hard drive connected, Finder will not let me search for files in the external hard drive how do i search in a hard drive

    i have a external hard drive connected, Finder will not let me search for files in the external hard drive how do i search in a hard drive

    What are you using to search? You should be able to search any drive in from the Finder. If you're having trouble, try "EasyFind" from the App Store (free). You can search any volumes with it.
    Clinton

  • At random times firefox loads an unrequested page. Sometimes it is the Google search page but more often it is a random page which sometimes loads or stays blank. I do not recognise them as sites from my directory. Otherwise Firefox works well. Any su

    At random times firefox loads an unrequested page. Sometimes it is the Google search page but more often it is a random page which sometimes loads or stays blank. I do not recognise them as sites from my directory. Otherwise Firefox works well. Any suggestion for a cure?
    == This happened ==
    A few times a week
    == one month ago

    Glad to see its working.
    To help other users find solutions, click on the '''"Solved It"''' button Next to the Reply that BEST solved your Question
    Please DO NOT click "Solved It" next to this reply

  • New CS6 on disk for Mac will not take my valid serial number; do I need to register the product before it will accept serial number and load on my Mac Book Pro?

    New CS6 on disk for Mac will not take my valid serial number; do I need to register the product before it will accept serial number and load on my Mac Book Pro?

    Hi Erwin,
    Please go through the below forum link and check.
    https://forums.adobe.com/thread/1079210
    Regards,
    Anand

  • I have a macbook pro 17" 2012 and the display colours are all too hard and the profile will not change it is stuck toLED Cinema display.

    I have a macbook pro 17" 2012 and the display colours are all too hard and the profile will not change it is stuck toLED Cinema display.

    Hello hbothner,
    Thanks for using Apple Support Communities.
    If you'd like to change the colors on your Mac's display, then you can calibrate your display by following the steps in the article below.
    OS X Yosemite: Calibrate your display
    Take care,
    Alex H.

  • After trying to down ios 7, iPad will not charge, will not open and will not connect to itunes.  The only display I will get is the apple logo, or low battery warning.

    After trying to download ios 7, iPad will not charge, will not open and will not connect to itunes.  Sometimes, screen will switch from Apple logo to low battery notification, but doesn't look as if battery is charging.

    Connect with cable to computer.   Your ipad is in recovery mode.
    Follow directions to fix
    http://support.apple.com/kb/HT1808?viewlocale=en_US

Maybe you are looking for