Hard Disk Partition Error.

good evening bro, iam tried as u mentioned n created new volume when i click finish after finish new simple volume it showing "the operation you selected will convert the selected basic disk to dynamic disk. if u convert the disk to dynamic , u wil not b able to start installed operating system from any volume on the disk(except the current boot volume ). are you sure want to continue."
yes or no
so bro what should i do if i tried yes it showing "dynamic disk are not supported by this operating system or server config. dynamic disk are not supported on clusters. pls help me

How many partitions are you trying to make? What are you trying to do? There is a limit to how many simple partitions you can have (4 I think).

Similar Messages

I am a OS10.7.4 user. yesterday i bought a Lacie external hard disk but error message appear said " You cant open the applicant LaCie setup assistant because PowerPC applicants are no longer support". please help me how to connect my mac with Lacie??

i am a OS10.7.4 user. yesterday i bought a Lacie external hard disk but error message appear said " You cant open the applicant LaCie setup assistant because PowerPC applicants are no longer support". please help me how to connect my mac with Lacie??

You do not need the Setup Assistant; in fact, you do not need any software on an external hard drive. I have two LaCie's; I erased the drive as soon as I plugged it in. You will need to format it anyway because most hard drives come Windows formatted. So, if you only want to use it with the Mac, highlight it in Disk Utility and choose Mac OS Extended (Journaled) as the format and the GUID Partition scheme under Options. While doing that, it will erase the drive (and get rid of the LaCie software) - once finished, your drive is ready to use for Time Machine or any other backup plans you have for it.

Hard disk partition not showing up during window 7 install

STOP - 0x00000116 error . I
want to install fresh OS from usb stick but the hard disk partition is not showing up. Only USB stick is getting detected.
Please help .. I have an interview and I need to fix this issue asap.

Hi there,
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
I understand that your hard drive is not showing up, presumably as a bootable partition. I am happy to help, but I need a bit more clarification of your problem. You mention a 0x00000116 error as well, which is normally part of a Blue Screen of Death. Does this happen regularly as well, or is that the real complaint, that you are getting the 0x code and a BLue Screen on startup?
That particular code is generally associated with a video driver problem.
Is the hard drive you are trying to install to, a new replacement hard drive or the original hard drive?
If you try to boot up the system, what error do you see?
Are there any repeating flashing LED patterns, or beeping patterns?
Assuming this is your original installed hard drive, did you try the recovery manager for the drive?
Performing an HP System Recovery (Windows 7)
Troubleshooting HP System Recovery Problems (Windows 7)
Let me know, so I can better target my help to your situation.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Turning laptop on computer will give - Hard Disk 301 error

Hey,
This was the last checkpoint for me with my problem.
Firstly I would like to tell what is my problem:
I'm getting hard disk 301 error everytime when I open my computer. I will get error occured in hard disk while using windows.
I checked from samsunghdd.com and there was application called seatoolsDOS, just cannot run it because I cannot access Boot Advance Option. I asked one forum what to do and answer was hard disk drive is dying and Im agreeing that too now.
Okay my HDD is: Samsung HM500JJ 500GB
OS Windows 7 Home Premium
Laptop model: HP DV6 3050so
Problem: Hard disk 301
Im just wondering how long my hard drive can run? I dont have anything to backup. Just want to get resolution to this.
If you want know more just ask. I'm sure I missed something so just ask
Regards Mika Marjomaa
This question was solved.
View Solution.

Hi Mika
The Hard drive can work for 1 day or for 1 year this cannot be guessed. This is a Smart Failure ID which is captured by the unit itself. It is always better to get the part replaced.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

I have upgraded my snow leopard to mavericks. Now I want to install the snow leopard in a hard disk partition. But the mac refuses to start the installation app on the snow leopard dvd. What to do?

I have upgraded my snow leopard to mavericks. Now I want to install the snow leopard in a hard disk partition. But the mac refuses to start the installation app on the snow leopard dvd. What to do?

Restart the computer with the disk in the drive and the C key held down.
(107242)

How to recover the recovery partition after delete all hard disk partitions

hallo
how to recover the recovery partition after delete all hard disk partitions in toshiba satellite pro c850-1fn ?
note that : I did not work recovery disc or usb to my laptop.
I have need of your help.

Satellite Pro C850-1FN (PSCBXE-01700EEN)
Restore the hard disk to its original out-of-the-box contents using Toshiba recovery media. All of the original partitions will be restored, including the recovery partition.
If no recovery discs were created, you can obtain them from Toshiba.
Toshiba Europe Backup Media Online Shop
For instructions, see the section Restoring the pre-installed software from your created Recovery Media on p. 4-18 of the User's Manual (attached).
-Jerry

Can't erase anything on an external hard disk partition of bootable backup ____error message -50 "Error in user parameter"

I am using MACOSX 10.6
The data on the disk partition on my Iomega 2Tb external hard disk drive (labeled "Bootable Backup") was written by Carbon Copy Cloner (CCC ver. 3.37)
I have had problems with overwriting this using CCC, and I have also had troubles changeing the data on my "Versioned Backup" partition, using either CrashPlan or CCC
A third partition that was virgin ("Half-Tb Volume") on the same external disk drive, however, DID accept the latest CCC bootable backup of my Macintosh HD...which is the reason I want to recover rthe space on the first bootable backup partition.
I have not found any links to this error using Google search, apart from the definition.
Anyone

Do a backup using Time Machine or a clone. Then boot into the Recovery Volume (command - R) on a restart. Run Disk Utility Repair disk. If it can't repair the disk, then select the erase tab and reformat using Mac OS Extended (Journaled). Also click the Option button and select GUID. When complete, reboot normally and restore your data.
Please update your profile to reflect the OS you are running.

Hard disk partition as a neutral "go-in-between" MacOS and WinXP?

Hi gurus,
I have a MacBook with a 500GB hard drive partitioned between Mac (400GB) and bootcamp (NTFS, 100GB, running Windows XP). Unfortunately I am using old software which does not exist for a Mac, written under Win 95 and operating an external controller unit. I then analyze the incoming data with MatLab and ArcGIS, but need to do further data processing under Mac environment (further statistical analyses, image editing and writing up the results).
I was advised to use bootcamp to speed up the PC performance with GIS and MatLab because the data is quite "heavy" (memory and time consuming operations on rasters some of which are 100's of MB).
I find myself switching frequently between operating systems, accessing my data on a flash or an external backup drive. Last week when my backup disk crashed logically after an improper ejection, I realized that I eject and re-eject it too often now. So basically I would like to have an "internal" go-in-between partition, where I can save and read data from both systems exactly as I do from a flash stick.
Is that possible in any way? I tried to resize the mac partition and add a FAT one, but this doesn't seem to work at all (googled the error, followed recommendations, no good). I have been told there is software which lets Win read Mac partition and vice versa, but I don't want the systems to interfere with each other. I just want a neutral piece of land where I can place some neutral data...
Thanks,
Benny

Hi Benny and welcome to Discussions,
have a look here http://davidseah.com/wikilab/Creating-2-Windows-Partitions-with-Boot-Camp/
Hope it helps
Stefan

Hard disk full error!

My Macbook Pro mid 2012 (non-retina display) keeps showing me that the startup disk is full. I have only one partition for the whole system and it is 750 GB in size. I am sure that all my files account only for 200 GB max. Suspecting a hard disk error I ran the disk utility's verify disk and repair disk but it showed no errors. Within the console windowserver and networkd were repeating on and on!!
I then used another productivity software named OmniDiskSweeper to check out my disk. I was surprised to find that within my usr/bin/ directory i found many clones of the usr directory. i.e. main root/usr/bin/usr/bin/usr/bin/usr/bin...........(many directories in this fashion and finally all of my hard disk excepting 25 MB is full). The size of a single bin directory was 40 GB and there were about 12 usr/bin within it's previous usr/bin. I tried deleting the duplicate directories created in OmniDiskSweeper itself.
But I keep getting a console error message stating that the UI of windowserver was force disabled by OmniDiskSweeper and immediately the next second I get that OmniDiskSweeper has forcefully re-enabled UI of windowserver and my whole hard disk is still full!! I also tried booting it up in safe mode but still it has been on the grey apple logo screen for 6 hours until now (and still going on) with no visible progress.
What could be the problem here? Any help?
Thanks in advance!!

means the drive is failing and should be replaced....
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

Start-up problem with hp pavilion dv6t-7000‏: "Boot Device Not Found. Hard Disk (3F0)" error

I started getting start-up problems with my hp pavilion dv6t-7000‏. It happens intermittently.
The boot error is:
Boot Device Not Found
   Please install an operating system on your hard disk.
   Hard Disk (3F0)
   F2 System Diagnostics
   For more information, please visit: www.hp.com/go/techcenter/startup
Could a faulty BIOS update cause this problem?
Anyone else who may have experienced a similar problem?
I'd appreciate any help about this problem. Thanks.

Hi
Please find the link given below might help you to fix your issue.
Resolve Boot Device not Found Error Message
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Hard disks, partitions and Mac Pro

Hi all,
I'm new to the Mac Pro and am migrating from a Windows environment, I have used a iBook for the past 6 months and this is the reason for totally migrating to a Mac Desktop.
I have spent half a day on browsing the forum here, very confusing I must say but then again I add that I am an absolute a-technical person.
I have a few questions on storage which I hope might get answered here;
My Hardware:
I am about to order a 2,66ghz Mac Pro, 4GB Ram, XP1900 and a 160Gb hard disk will will be replaced as soon as the Mac Pro enters my dwelling.
My Work Environment:
Apart from the basic office things, Internet, Mail and such I will use the mac Pro 90% for Imaging purposes. Most used applications:
- CS2
- Aperture
- Adobe Lightroom
as well as a number of add-ons like HDR programs, Noise programs, RAW converters etc.
I am a Photographer working with Mid-format and Standard format images, which in some case, like when using HDR can reach sizes of well over 150-200Mb per image!
Useually the image size of a 16bit mid-format tiff are around 70MB.
Now for the question, how to configure the best possible HD setup.
I will use WinXP, which I would like to run on a seperate partition/disk
I need a schratch disk for CS2
I need roughly 500GB of intermediate storage for imgaes before the periodically get back-up to external hard disk.
So I was thinking the following, and this only based upon how I used my Win Environment:
150GB Raptor as start-up disk and location for programs and OSX as well as basic documents and files
76GB Raptor as Scratchdisk
500GB as WinXp disk (30%) and rest as storage for Image cataloging system (mainly normal sized Jpegs)
750GB as Image tank
I have the Raptors, but don't have to use them if a better solution comes out. Since I will be using my Win pc until everythink works satisfactory on the Mac...
some remarks:
I have red about raid, both 0 and 1 seem interesting but I will loose out on disk space possibilities, and will be forced to work with external drives again, which I don't like... but if push comes to shove I will do that.
sorry for the information overload, and maybe all points have been answered in other threads before, but whilst browsing through hundreds of threads I couldn't see the forest becasue of the trees anymore.
One last comment, I make my living with photography so a good setup is of vital importance ....
Kindest regards, and many thanks in advance

Hi all,
Hi,
Now for the question, how to configure the best
possible HD setup.
IMO; use a 3 drive RAID 0 for your boot, application, and
data partition - my style would be all in one big partition
and just segragate stuff with folders. I would then add 2
USB or FireWire drives. One for backing up your system
and one for the windows XP if you just have to have windows
running on your MacPro. They don't run at the same time you
know - like on Amiga where MacOS, Windows, and AmigaOS all
multitasked together in shared memory space simultainiously.
As such my opinion is that it's better to keep your WinTel
box on a KBM switch and LAN the two together.
I will use WinXP, which I would like to run on a
seperate partition/disk
I need a schratch disk for CS2
With a 3 drive RAID your disk I/O is between 3 and 20 times
the speed of a single drive setup so separate cache drive
isn't really advantagious. Click on the link below and
scroll down to the Drive Test area:
http://db.xbench.com/merge.xhtml?doc1=199338&doc2=195252
Both are my profiles. One with a single drive, and one
with a 3-drive raid. No other differences.
I need roughly 500GB of intermediate storage for
imgaes before the periodically get back-up to
external hard disk.
So I was thinking the following, and this only based
upon how I used my Win Environment:
150GB Raptor as start-up disk and location for
programs and OSX as well as basic documents and
files
76GB Raptor as Scratchdisk
500GB as WinXp disk (30%) and rest as storage for
Image cataloging system (mainly normal sized Jpegs)
750GB as Image tank
I have the Raptors, but don't have to use them if a
better solution comes out. Since I will be using my
Win pc until everythink works satisfactory on the
Mac...
IMO the Raptors are overpriced. If it were me I would sell
them. I think the two together will pay for all three 320
or 300 gig RAID drives. I did some research regarding which
drives are good in a Mac RAID environment and I ended up
going for the the MaxLine Maxtor drives (even though I hate
Maxtor usually). So far I'm very happy with them and the
fact that they are like one of the most inexpensive drives
you can get didn't hurt either.
I think that if a person REALLY needs the speed offered by
Raptor drives and is willing to pay the difference for it
then they should just get a dedicated RAID card which offers
even more of a speed increase!!!
some remarks:
I have red about raid, both 0 and 1 seem interesting
but I will loose out on disk space possibilities, and
will be forced to work with external drives again,
which I don't like... but if push comes to shove I
will do that.
You don't lose any space if you use just RAID 0. If there
are three 300gig HDs that format individually to 260gig
each then in a RAID 0 configuration you would have 780gigs.

Hard disk partition area inaccessable

Hello,
I have a 15 GB Quantum HDD. I tried to Install Solaris and it created a swap partition of size 720 MB on it. The installation failed due to some reason afterwards. BUT that partition is now INACCESSABLE. I have tried low level disk formating utilities, i have tried Quantum Disk Manager "Zero fill", I have tried to do every thing but every thing results in a total accessable size of 14300 MB. Where is my 720 MB area. THe badluck is that it was created in the primary partion area of the hard disk. Now Iwant to install linux as well as windows on my harddisk but there is not enough primary partion area to create necessary partitions. Can some one tell me how to retrieve this area taken over by solaris ???
Kamran

Hi,
15 GB Harddisk space is FORMATTED capacity. I have checked BIOS settings. Plus I have tried to format it low-level on my P-I and P-II machines as well. But not successful. This problem occured since I tried to Install Solaris on it. I tried to Install SOLARIS again and it shows that partition as a non-DOS partition. I happily deleted that partition from there but after restart it again vanished.
What should I do ? I have also written to Maxtor people but still haven't got a reply.
Kamran

Hard disk partition issue and space issue

Hello i was trying to do a partition on my hard disk on my macbook pro retina. Wen i go to disk utility and try it says i need to repair the disk. I used command r in reboot and repaired but still having issues. When i look at space i get two different space available on macintosh HD. Here are the pictures you will see the space available is different depending what i choose. I am confused. Any help is appreciated. Here are the pics.

When you boot using Cmd-R, you're booting from a hidden Recovery Partition. That partition is using part of the space that is the size difference you're seeing between the Media line (upper picture) and the boot partition line. You can turn on the Debug Menu which shows the extra partitions using these directions.
I'm not sure but I suspect the issue may be that your boot partition is encrypted.

Hard disk partition issue

Dear
I purchased Lenovo G580 one month before. The hard disk size is 750GB.The “C” itself 650GB. I tried to do the partition of250GB from Local disk C. After partition it shows unallocated space. But after that I could not make format for that unallocated Partition. During partitioning a pop up window shows that “The operation you selected will convert the selected basic disc to dynamic disc. If you convert the disk to dynamic, you will not be able to start installed operating systems from any volume on the disk (except the current boot volume). Are you sure you want to continue?”.
If I press “yes” the popup window show that “Dynamic disks are not supported by this operating system or server configuration. Dynamic disks are not supported on clusters”.Please check and give me a solution. I am using Windows 7 Home premium . here i attached the photos.
Link to image 1
Link to image 2
Link to image 3
Regards,
Shameer H
Moderator note: images totalling more than 50k converted to links per forum rules: Lenovo Community Participation Rules

It may be formatted in some Windows format that Macs cannot use. If there’s nothing on the drive that you want to save, reformat it with a Mac-friendly format. http://computers.tutsplus.com/tutorials/how-to-format-your-macs-hard-drive--mac- 53986

Three replacement Stream 7's three hard disk- ( 3f0 ) errors

I received a Stream 7 Table in June. All fine until I filled it and did the inbuilt reset which bricked it. Chatted with tech support and they immediately replaced it. Not cost effective to waste time on a cheap tablet I gather. Recieved the replacement in 3 days which is fine. Turned it on only to recieve the following error:Boot device not foundPlease install an operating system on your hard disk
hard disk- ( 3f0 )
f2 system diagnostics
for more information, please visit: www.hp.com/go/techcenter/ Back to chat - replaced - 3 days new tablet - same error - Back to chat - replaced - 3 days new tablet - rinse repeatSo now I have 4 useless Stream 7's unless there is some way I can download the OS and use an OTG to load it. I don't think the tablet is seeing the drive at all. When I use the hold power + volume down f12 gives me the same error.I'm sick of getting replacements.
Thanks all.

There is no available OS to download to recover your unit(s), only service centers have the SSRU (Service System Recovery USB) designated for your unit.

Hard Disk Partition Error.

Similar Messages

Maybe you are looking for