Hard disk Partition problem.
hi,
i have mac 13" laptop, which i am trying to put 500 gb hdd. plese i need some suggestion, which way to do.
i need 100 GB for mac, then by using bootcamp i want to install windows xp, for that i need 200gb, and the remaining 200gb i want to format it by fat32, so that i can use that 200 gb from windows as well as mac. a common drive.
so, for that.. by using mac installing disk, i first partition 500gb in to 300 + 200. and installed mac o that 300 gb . once its installed then i want to install xp by using bootcamp on that 300 gb . but its giving me error, its not allowing me to do partitioning again for xp.
pelase need the solution , or some other way to manage this
thanks
Click here for information.
(45196)
Similar Messages
-
Hard disk partition not showing up during window 7 install
STOP - 0x00000116 error . I
want to install fresh OS from usb stick but the hard disk partition is not showing up. Only USB stick is getting detected.
Please help .. I have an interview and I need to fix this issue asap.Hi there,
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
I understand that your hard drive is not showing up, presumably as a bootable partition. I am happy to help, but I need a bit more clarification of your problem. You mention a 0x00000116 error as well, which is normally part of a Blue Screen of Death. Does this happen regularly as well, or is that the real complaint, that you are getting the 0x code and a BLue Screen on startup?
That particular code is generally associated with a video driver problem.
Is the hard drive you are trying to install to, a new replacement hard drive or the original hard drive?
If you try to boot up the system, what error do you see?
Are there any repeating flashing LED patterns, or beeping patterns?
Assuming this is your original installed hard drive, did you try the recovery manager for the drive?
Performing an HP System Recovery (Windows 7)
Troubleshooting HP System Recovery Problems (Windows 7)
Let me know, so I can better target my help to your situation.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping! -
I have upgraded my snow leopard to mavericks. Now I want to install the snow leopard in a hard disk partition. But the mac refuses to start the installation app on the snow leopard dvd. What to do?
Restart the computer with the disk in the drive and the C key held down.
(107242) -
How to recover the recovery partition after delete all hard disk partitions
hallo
how to recover the recovery partition after delete all hard disk partitions in toshiba satellite pro c850-1fn ?
note that : I did not work recovery disc or usb to my laptop.
I have need of your help.Satellite Pro C850-1FN (PSCBXE-01700EEN)
Restore the hard disk to its original out-of-the-box contents using Toshiba recovery media. All of the original partitions will be restored, including the recovery partition.
If no recovery discs were created, you can obtain them from Toshiba.
Toshiba Europe Backup Media Online Shop
For instructions, see the section Restoring the pre-installed software from your created Recovery Media on p. 4-18 of the User's Manual (attached).
-Jerry -
I am using MACOSX 10.6
The data on the disk partition on my Iomega 2Tb external hard disk drive (labeled "Bootable Backup") was written by Carbon Copy Cloner (CCC ver. 3.37)
I have had problems with overwriting this using CCC, and I have also had troubles changeing the data on my "Versioned Backup" partition, using either CrashPlan or CCC
A third partition that was virgin ("Half-Tb Volume") on the same external disk drive, however, DID accept the latest CCC bootable backup of my Macintosh HD...which is the reason I want to recover rthe space on the first bootable backup partition.
I have not found any links to this error using Google search, apart from the definition.
AnyoneDo a backup using Time Machine or a clone. Then boot into the Recovery Volume (command - R) on a restart. Run Disk Utility Repair disk. If it can't repair the disk, then select the erase tab and reformat using Mac OS Extended (Journaled). Also click the Option button and select GUID. When complete, reboot normally and restore your data.
Please update your profile to reflect the OS you are running. -
Hard disk partition area inaccessable
Hello,
I have a 15 GB Quantum HDD. I tried to Install Solaris and it created a swap partition of size 720 MB on it. The installation failed due to some reason afterwards. BUT that partition is now INACCESSABLE. I have tried low level disk formating utilities, i have tried Quantum Disk Manager "Zero fill", I have tried to do every thing but every thing results in a total accessable size of 14300 MB. Where is my 720 MB area. THe badluck is that it was created in the primary partion area of the hard disk. Now Iwant to install linux as well as windows on my harddisk but there is not enough primary partion area to create necessary partitions. Can some one tell me how to retrieve this area taken over by solaris ???
KamranHi,
15 GB Harddisk space is FORMATTED capacity. I have checked BIOS settings. Plus I have tried to format it low-level on my P-I and P-II machines as well. But not successful. This problem occured since I tried to Install Solaris on it. I tried to Install SOLARIS again and it shows that partition as a non-DOS partition. I happily deleted that partition from there but after restart it again vanished.
What should I do ? I have also written to Maxtor people but still haven't got a reply.
Kamran -
Help NEEDED! External Hard Disk Drive Problem!
Dear Forum,
I am using MacBook with snow leopard and I am also using a WD Ext.HDD 500GB. Ok, I will described in detailed regarding what problem has occurred so that you guys can help me:D. Firstly, I formatted my wd hdd to hfs+j as the default format is NTFS. Then afterwards, I forgotten that hfs+j cannot support windows, thus I partition it to 2, with one hfs+j and one Fat32(formatted to ntfs when in windows), then I realised that my macbook don't have enough space, thus, I reformatted the whole hdd to one partition only, hfs+j. Now, the problem comes, when I formatted it to hfs+j, I found the free space not right, at default, the wd is 499.41GB(as seen on disk utility), but when I look at the hfs+j partition, the free space is only 499.06GB(as seen on disk utility with no files in it). Another thing, when I looked into the disk utility info of my hfs+j partition, there is 400+MB of hard disk space already taken. Then, I transferred one of my files(4.82GB) into my ext.hard disk, when the transfer is complete, I 'get info' my ext.hdd and found out that 5.26GB are taken up, but I have only transferred 4.82GB of files. So what is happening to my hard disk? Any ways to fix this problem guys?
I really need your help! I will appreciate greatly if you guys can help me, thanks!:D
Regards
Ala.The odd 400MB is the hidden files put there by the system to define the file structure of the partition, plus other stuff like .Trash. It's perfectly normal and the HDD wouldn't be recognised if they weren't there.
You will see a similar situation with the internal boot drive if you compare the Drive size (leftmost item with the manufacturers designation) and that of Macintosh HD (which is the working partition). In my case this shows 640.14 GB for the drive, 639.79 GB for Macintosh HD, a difference of 350MB
This will be the same within about ± 50MB whatever drive you format in HFS+J, including pen drives. -
Hard disks, partitions and Mac Pro
Hi all,
I'm new to the Mac Pro and am migrating from a Windows environment, I have used a iBook for the past 6 months and this is the reason for totally migrating to a Mac Desktop.
I have spent half a day on browsing the forum here, very confusing I must say but then again I add that I am an absolute a-technical person.
I have a few questions on storage which I hope might get answered here;
My Hardware:
I am about to order a 2,66ghz Mac Pro, 4GB Ram, XP1900 and a 160Gb hard disk will will be replaced as soon as the Mac Pro enters my dwelling.
My Work Environment:
Apart from the basic office things, Internet, Mail and such I will use the mac Pro 90% for Imaging purposes. Most used applications:
- CS2
- Aperture
- Adobe Lightroom
as well as a number of add-ons like HDR programs, Noise programs, RAW converters etc.
I am a Photographer working with Mid-format and Standard format images, which in some case, like when using HDR can reach sizes of well over 150-200Mb per image!
Useually the image size of a 16bit mid-format tiff are around 70MB.
Now for the question, how to configure the best possible HD setup.
I will use WinXP, which I would like to run on a seperate partition/disk
I need a schratch disk for CS2
I need roughly 500GB of intermediate storage for imgaes before the periodically get back-up to external hard disk.
So I was thinking the following, and this only based upon how I used my Win Environment:
150GB Raptor as start-up disk and location for programs and OSX as well as basic documents and files
76GB Raptor as Scratchdisk
500GB as WinXp disk (30%) and rest as storage for Image cataloging system (mainly normal sized Jpegs)
750GB as Image tank
I have the Raptors, but don't have to use them if a better solution comes out. Since I will be using my Win pc until everythink works satisfactory on the Mac...
some remarks:
I have red about raid, both 0 and 1 seem interesting but I will loose out on disk space possibilities, and will be forced to work with external drives again, which I don't like... but if push comes to shove I will do that.
sorry for the information overload, and maybe all points have been answered in other threads before, but whilst browsing through hundreds of threads I couldn't see the forest becasue of the trees anymore.
One last comment, I make my living with photography so a good setup is of vital importance ....
Kindest regards, and many thanks in advanceHi all,
Hi,
Now for the question, how to configure the best
possible HD setup.
IMO; use a 3 drive RAID 0 for your boot, application, and
data partition - my style would be all in one big partition
and just segragate stuff with folders. I would then add 2
USB or FireWire drives. One for backing up your system
and one for the windows XP if you just have to have windows
running on your MacPro. They don't run at the same time you
know - like on Amiga where MacOS, Windows, and AmigaOS all
multitasked together in shared memory space simultainiously.
As such my opinion is that it's better to keep your WinTel
box on a KBM switch and LAN the two together.
I will use WinXP, which I would like to run on a
seperate partition/disk
I need a schratch disk for CS2
With a 3 drive RAID your disk I/O is between 3 and 20 times
the speed of a single drive setup so separate cache drive
isn't really advantagious. Click on the link below and
scroll down to the Drive Test area:
http://db.xbench.com/merge.xhtml?doc1=199338&doc2=195252
Both are my profiles. One with a single drive, and one
with a 3-drive raid. No other differences.
I need roughly 500GB of intermediate storage for
imgaes before the periodically get back-up to
external hard disk.
So I was thinking the following, and this only based
upon how I used my Win Environment:
150GB Raptor as start-up disk and location for
programs and OSX as well as basic documents and
files
76GB Raptor as Scratchdisk
500GB as WinXp disk (30%) and rest as storage for
Image cataloging system (mainly normal sized Jpegs)
750GB as Image tank
I have the Raptors, but don't have to use them if a
better solution comes out. Since I will be using my
Win pc until everythink works satisfactory on the
Mac...
IMO the Raptors are overpriced. If it were me I would sell
them. I think the two together will pay for all three 320
or 300 gig RAID drives. I did some research regarding which
drives are good in a Mac RAID environment and I ended up
going for the the MaxLine Maxtor drives (even though I hate
Maxtor usually). So far I'm very happy with them and the
fact that they are like one of the most inexpensive drives
you can get didn't hurt either.
I think that if a person REALLY needs the speed offered by
Raptor drives and is willing to pay the difference for it
then they should just get a dedicated RAID card which offers
even more of a speed increase!!!
some remarks:
I have red about raid, both 0 and 1 seem interesting
but I will loose out on disk space possibilities, and
will be forced to work with external drives again,
which I don't like... but if push comes to shove I
will do that.
You don't lose any space if you use just RAID 0. If there
are three 300gig HDs that format individually to 260gig
each then in a RAID 0 configuration you would have 780gigs. -
Hard disk partition as a neutral "go-in-between" MacOS and WinXP?
Hi gurus,
I have a MacBook with a 500GB hard drive partitioned between Mac (400GB) and bootcamp (NTFS, 100GB, running Windows XP). Unfortunately I am using old software which does not exist for a Mac, written under Win 95 and operating an external controller unit. I then analyze the incoming data with MatLab and ArcGIS, but need to do further data processing under Mac environment (further statistical analyses, image editing and writing up the results).
I was advised to use bootcamp to speed up the PC performance with GIS and MatLab because the data is quite "heavy" (memory and time consuming operations on rasters some of which are 100's of MB).
I find myself switching frequently between operating systems, accessing my data on a flash or an external backup drive. Last week when my backup disk crashed logically after an improper ejection, I realized that I eject and re-eject it too often now. So basically I would like to have an "internal" go-in-between partition, where I can save and read data from both systems exactly as I do from a flash stick.
Is that possible in any way? I tried to resize the mac partition and add a FAT one, but this doesn't seem to work at all (googled the error, followed recommendations, no good). I have been told there is software which lets Win read Mac partition and vice versa, but I don't want the systems to interfere with each other. I just want a neutral piece of land where I can place some neutral data...
Thanks,
BennyHi Benny and welcome to Discussions,
have a look here http://davidseah.com/wikilab/Creating-2-Windows-Partitions-with-Boot-Camp/
Hope it helps
Stefan -
Hard disk partition issue and space issue
Hello i was trying to do a partition on my hard disk on my macbook pro retina. Wen i go to disk utility and try it says i need to repair the disk. I used command r in reboot and repaired but still having issues. When i look at space i get two different space available on macintosh HD. Here are the pictures you will see the space available is different depending what i choose. I am confused. Any help is appreciated. Here are the pics.
When you boot using Cmd-R, you're booting from a hidden Recovery Partition. That partition is using part of the space that is the size difference you're seeing between the Media line (upper picture) and the boot partition line. You can turn on the Debug Menu which shows the extra partitions using these directions.
I'm not sure but I suspect the issue may be that your boot partition is encrypted. -
Dear
I purchased Lenovo G580 one month before. The hard disk size is 750GB.The “C” itself 650GB. I tried to do the partition of250GB from Local disk C. After partition it shows unallocated space. But after that I could not make format for that unallocated Partition. During partitioning a pop up window shows that “The operation you selected will convert the selected basic disc to dynamic disc. If you convert the disk to dynamic, you will not be able to start installed operating systems from any volume on the disk (except the current boot volume). Are you sure you want to continue?”.
If I press “yes” the popup window show that “Dynamic disks are not supported by this operating system or server configuration. Dynamic disks are not supported on clusters”.Please check and give me a solution. I am using Windows 7 Home premium . here i attached the photos.
Link to image 1
Link to image 2
Link to image 3
Regards,
Shameer H
Moderator note: images totalling more than 50k converted to links per forum rules: Lenovo Community Participation RulesIt may be formatted in some Windows format that Macs cannot use. If there’s nothing on the drive that you want to save, reformat it with a Mac-friendly format. http://computers.tutsplus.com/tutorials/how-to-format-your-macs-hard-drive--mac- 53986
-
How to resove the "smart hard disk error" problem occured message displayed while starting up?
Dear HP Technician
My HP laptop showing me a "Smart Hard disk Error" while starting up the computer when I press power button on.
The message displayed on black screen is as below:
Smart hard disk error
The smart disk check has detected an imminent failure. To ensure not data loss, please backup the content immidiately and run the Hard Disk Test in system Diagnostics.
Hard Disk 1 (301)
F2 system Diagnostics
Enter-continue startup
Fore information, please visit:
www.hp.com/go/techcenter/startup
I already did the Hard disk self test and it showed all the test were passed.
Please help me to resolve this problem
thank you
regards
neeraj
+61 0432247152There are 2 ways of running a test on your hard drive . One way is through BIOS (F10) and other is through HP System diagnostics(F2). How exactly was test initiated from your end ?
The SMART imminent failure for Hard drive is an indication that your Hard drive is on verge of failure or might fail anytime depending on usage. I would recommend you to backup your files immediately because your hard drive might die at any moment and I'm pretty sure its needs to be replaced.
Kindly check the instructions over here in order to run the test for your hard drive
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!! -
Reformatting Hard Disk - any problems with CC?
I want to reformat my hard disk and start again - its got to that point where the PC seems to be running slowly and the OS needs re-installing. It's Windows 7 Pro 64-bit version.
Does anyone know if there are any issues with re-installing CC? I'm worried that doing this will use up one of my licenses and I won't be able to put a copy on my laptop in the future. (We're allowed two copies aren't we, one on the PC and one on a Laptop, for example?)
Thanks for any help.
BrianHi Brianpeart,
Welcome to Adobe Forum,
The CC has been activated twice.
you can deactivate it in two ways.
1. Launch any of the CC application and go to Help>Sign Out(Adobe ID)
For CS6 apps Go to Help>Deactivate
2.Go to Preferences of Creative Cloud and in "General" tab click on "Account" and click the button "Sign Out from Creative Cloud".
Note:
It will deactivate all applications associated with your Adobe ID installed on the same machine.
or
When you install it on the third computer or for the third time & when you to activate it, if it installed & activated already twice, there will be an option of deactivating it from the previous computers, please click on that.(To deactivate from preinstalled machine, Open any Adobe CC application > Help Menu > Signout.)
Next it will allow you to activate on your new machine,
Now you can go back to your first computer, log out & log back in of Desktopp CC App, launch any product, if there is any product to buy, in that prompt there will be an option to " license the software", please click on that & sign in.
It will reactivate the CC on the first machine.
You have already deactivated it from one machine, hence you can activate it on third computer.
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivat ion-products.html#deactivate-problem
Regards,
Rajshree -
Ultra Sparc 10, WD 80GB Hard Disk format problem
How does one get over the - Contact manufacturer for formating error ?
I have an US10, and am trying to install a 2nd Western Digital 80GB hard disk.
The format command sees this disk as a 2nd disk but only of 11GB capacity.
It does not let me format this disk further.
Any help appreciated.
Arvind.HI ARAVIND,
First of all I have not so far seen any limitation to disk size on ultra 10. Recently, i.e., 3 days back, I
installed an 80GB Seagate Baracuda HDD on Ultra 10, of course with some teeting problems. At first
I could get only 11.3 GB by default, or 64.5 GB by forcing the disk geometry. I really tried hard to make
this work beyond 64.5GB. As this was for a customer of ours, we had to make it work. I was frantically
searching the internet, and landed in some forum, where somebody replied to exactly similar query to
install Solaris 8 for HDD of capacitiies higher than 20GB. So Bang, I changed the OS to Solaris 8. But
Alas! I got only 74.5 GB capacity. Again went back to Seagate site and found that the figure of 156,301,488
MAX SECTORSwhen multiplied with 1024*1024*1024 you arrive at 74.5 GB, whereas if multiply this
number by 1000*1000*1000 you arrive at 80 Billion Bytes. However I am able to use this disk without any
problem now. So first install Solaris 8 and continue your R&&D. I wasted 4 days in getting this info. -
Eminent hard disk failure problem
hai !
my notebook is g62 series.
operating system - windows 7 64-bit home basic
my problem is eminent hard disk failure,can u solve this problem as soon as possible.Seems that it is a hard disk failure. You could run a hard disk diagnostic test.
Once you turn on the notebook, keep tapping F2. Select hard disk test and hit enter to run it.
take note of the result and call hp tech support at 1-800-474-6836 so it could be serviced.
HTH
Click the White Kudos Star to say Thanks
Please mark Accept As Solution if it solves your problem
Maybe you are looking for
-
I have 2 monitors and an ethernet cable to connect to my mac book pro. Can I use the 2 thunderbolt connectors for one of the monitors and the ethernet cable and the hdmi for the 2nd monitor? MacBook Pro Retina 15in Mid 2014 Model Name: MacBook Pro
-
I regret I cannot decide which thread to post this so it may require re-assignment by the moderator. Each person I ask has a different preference of program, depending upon his individual need. Is there a comparative study/analysis on all, or most, o
-
Error LOAD_PROGRAM_CLASS_MISMATCH
Hi. I have a few ABAP objects that interact with each other. In one case, I have an object that gets passed as a parameter to another object. I changed a method type on the parameter object from public to static. That's around the time that I started
-
[XFCE]Keyboard layout config sometimes gets reset after suspend/resume
After I got suspend/resume working thanks to the help here, I have still another little problem with it: After suspend/resume the keyboard layout configuration in the corresponding xfce-panel plugin is sometimes reset to US. The keyboard layout shoul
-
While Loop - Iteration Terminal
Why the iteration terminal in my upper while loop counts only to 1? (err_while.vi) Petr Bilovsky Attachments: err_while.rar 289 KB