Hard Drive and CD no worki

I have a previous post under a flashing ?/picasso folder subject.
I have concluded that there is some sort of problem (logic board?) that is causing both my Hard Drive and CD to not function at the same time. This occurs intermittently however.
After the problem occurs, if I wait a few days with the iBook disconnected from power, both drives will work again for a short time before they die again.
I can boot the iBook via firewire, and using both Hardware Test or TechTool Deluxe:
1. All diagnostics will pass on both HDD and CD drives, or
2. Neither the CD nor the HDD are visible.
While trouble shooting, I was able to reformat the HDD drive, but I have been unable to get it to function long enough to load even one of the OS X 10.3 CDs. It gets part way in and then dies, and becomes undetectable for a few days.
At this point I am resigned to use the iBook as a desktop tethered to and external HDD and CD drive.
Anyone have any suggestions?
iBook G3 (Dual USB) M8598LL/A
600/384/15G/DVD
Mac OS X 10.3.9

Hey Red,
I looke a little closer at the backside of the board where the cable socket is and found some corrosion. I got so excited that I had found the problem. I cleaned it all up, re-assembled it, and loaded 10.3 on it...so far so good.
So how bad was the corrosion? Was there some kind of contamination/liquid got into the board? Did it come from the top of the board? Do you see those tiny traces on the bottom of the board? There're around .1 mm wide and connect to a resistor array from that 50 pin connector. Examine all of that very carefully with a very strong magnifier. Depending on how bad the corrosion is/was there could be cracks in the pin to board connection and also compromised traces. The faults could be microscopic and would worsen when the board gets hot.
Since you found corrosion in one spot look in others to see if there's more. It only takes a tiny drop in the right place.
Congratulations by the way. It is exciting to discover the cause of the problem.
I don't think that you'll find any board diagrams for the iBook. You might have more luck trying to cross reference chip numbers.
Richard

Similar Messages

Hard drive and usb not working

Greetings,
My notebook is cq60-214dx compaq presario with a windows vista basic operating system. I have pentium dual core inside.
Recently, My usb stop working, there is nothing else hooked up to it for the past year. It is not detecting my flash drive. I did the shut down and unplug thing. I also did the F10 bios test and the hard drive test failed at 61%. I went into the usb root hub and it shows each one is fine and is at 0 mA. The only thing that I see is the microsoft Isatap adapter code 31. A toredo tunneling pseudo interface -code 10 with a caution sign. I 've tried the hp down load and all kind of suggestions that is not working. Is there something I can try to fix the hard drive. I'd like to eventually go to windows 8 operatiing system but I am not fearful.

Hi newbie-515,
Unfortunately, the failure code for the hard drive is fortelling you of what is to come. In my opinion I would address the solution by the following specific actions:
1: Back up any data that can be accessed from the original drive, onto an external hard drive. To minimize the risk of losing any information.
2: Replace the failing hard drive, before it gets to the point of complete failure. This may also prevent loss of personal data.
and 3: Decide whether you want to upgrade/restore Microsoft Windows 7 onto the pc. That particular pc has current drivers available online at HP Support for the Microsoft Windows 7 operating system.
Once this has been completed, then you can recover any personal data that was backed up to the external hard drive, onto the newly installed hard drive.
***In this forum support is available for HP hardware/software assistance. I will provide best-effort support with your HP hardware/software. If you need assistance with software that is from any other vendor, then I may re-direct you to the appropriate reference at that time.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem. Click on the BLUE KUDOS button on the left to say "Thanks"
Although I am an HP employee, I am speaking for myself and not for HP.

I have partitions in my external hard drive, and it was working fine. but not the oy, I have partitions in my external hard drive, and it was working fine. but not the other partition says you can only read. how to solve it ? help me

Mu external hard disk partition is not working. In get info it says that "hou can read only" bow can I fix this?

Read this:
http://smallbusiness.chron.com/fix-permissions-imac-external-hard-drive-48257.ht ml

ITunes saying - The song "XYZ" could not be used because the original file could not be found. Would you like to locate it? I have my songs all located on a 2TB hard drive and it still says it has 150GB on it but can't find them and they are there???

Help!
Opened iTunes to play some music on the computer tonight and its coming up that the songs cannot be located for virtually all of my iTunes library??? I store my iTunes library on a 2TB hard drive and its always worked fine but I ran iBoostup software earlier today and its hasn't worked since then although I have to admit I haven't tried it for a week. It was a free app to clean up files on the apps store.
When I click on the 2TB hard drive under the iTunes link it still comes up 150GB is in the file but it just can't find the songs???
Can anyone help?
Cheers!

The links below illustrate how your iTunes should look if you use default settings in preferences. If you don't use those settings then you have to know what you're doing.
Image of folder structure and explanation of different iTunes versions (turingtest2 post) - https://discussions.apple.com/message/13025536 and https://discussions.apple.com/message/17457605
The above links also illustrate the Media folder and its subfolders. Look for a file in there in the logical structure by folder artist and album. If you're lucky, linking one file will get an offer to link others and it iwll all come together again.
I see you are running OSX 10.5.8 it would help to know which version of iTunes you use now and which one you used before.

Every time I try to back up my Macbook Pro with an external hard drive using Time Machine, I receive the error of "the disk does not have enough space". I have a 500GB hard drive and only 120GB Macbook. It worked fine before the latest Maverick's

Every time I try to back up my Macbook Pro with an external hard drive using Time Machine, I receive the error of "the disk does not have enough space". I have a 500GB external hard drive and only 120GB Macbook. It worked fine before the latest Maverick's update. Any help would be greatly appreciated.

My guess would be it has created an entirely new backup of your drive when you upgraded to Mavericks.
See Here: http://pondini.org/TM/1.html
And here: http://pondini.org/TM/9.html
Peruse the whole site. There is a lot of information there.

I have itunes directory on an external hard drive and want to direct a new installation of itunes on windows 8 to use it. I tried holding down ctrl and clicking itunes and after many tries got it to work one time. When I went back in later it had reverted

I have itunes directory on an external hard drive and want to direct a new installation of itunes on windows 8 to use it. I tried holding down ctrl and clicking itunes and after many tries got it to work one time. When I went back in later it had reverted back to a blank version of itunes and I cant get ctrl to work again. Any other ideas?

This is sometimes caused by a problem with the iTunesPrefs.xml file, normally found at C:\Users\<User>\AppData\Local\Apple Computer\iTunes\iTunesPrefs.xml. Try dragging this to the desktop and trying again.
Alternatively the problem may be that you have McAfee AV and it is preventing iTunes from updating the same file and thus causing the problem. See Why does iTunes delete my itunesprefs.xml? for details.
tt2

I just need to know how you get an iTunes library off the original hard drive of a mac and onto an external hard drive and still have it work normally?

I just need to know how you get an iTunes library off the original hard drive of an imac and onto an external hard drive and still have it work as it normally would?

http://support.apple.com/kb/HT1449

I have tried transferring my iphoto library to my external hard drive and it's not working.

I have a Macbook Pro. I have recently gotten into photography and to save space on my internal hard drive, I bought an external hard drive to keep all of my photos on. It's a Toshiba with 1 TB of memory. I have searched and searched on how to transfer my iphoto library to it and I'm getting the same answer. I open two finder windows, one with pictures open, the other with the external hard drive open. I have tried to drag the iphoto library icon to the second window to the external hard drive and instead of it staying there and loading everything it gives me the circle with a diagonal line through it and floats back up to the pictures finder window. I'm not sure what the problem is, but I really need help!

you need to make sure the drive you are moving the iphoto library to is formatted in the mac OS extended journaled format
you can view and/or change this in the disk utility which is found in the utilities folder in applications within finder.
on the left side select the external HD and then click on the erase tab it will show you the format it's currnetly in, if it's not mac OS extended journaled select that from the drop down and then hit the button that says erase.
after the erase is complete try the article i gave you again to move the location of the lbrary and it should work.
good luck

I have a seagate 1tb hard drive and a 16gb memory stick, how do i transfer avi files from one to another as the click drag and drop wont work, please help?

i have a seagate 1tb hard drive and a 16gb memory stick, how do i transfer avi files from one to another as the click drag and drop wont work, please help?

Greetings,
What happens when you drag it?
Make sure the drive you are moving the files to has enough available space to receive the file:
Click on the movie file and go to File > Get Info and note the "size"
Check the drive to which you are moving the file to make sure it has enough available space: https://idisk.me.com/madisonfile-Public/web/finder-drive-available-space-and-for mat.html
Also note the format of the drive you are copying too. If it is not Mac OS Extended or FAT (not recommended unless you are taking it to a windows computer) then that may be the issue.
Hope that helps.

I had to erase my hard drive and then reinstall everything back from my passport external hard drive. Now my iPhoto edit is not working. I get a blank screen when I want to edit. The photos show up in the library but I cannot edit them. Help?

I had to erase my hard drive and then reinstall everything back from my passport external hard drive. Now my iPhoto edit is not working. I get a blank screen when I want to edit. The photos show up in the library but I cannot edit them. Help?

There are several possible causes for the Black Screen issue
*1. Permissions in the Library* : Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
*2. Minor Database corruption*: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
*3. A Damaged Photo*: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
*4. A corrupted iPhoto Cache*: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
*5. A corrupted preference file*: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help:
As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
Regards
TD

Hello. I have MacBook Pro. I have 30,000 photos on iPhoto which is not on the hard drive but on an external hard drive. I have purchased a 2nd external hard drive and I would like to make a copy of my iphoto library onto it. I cant get this to work.

I have MacBook Pro. I have my iPhoto library on external hard drive only. It has 30,000 photos on it. I have bought a 2nd external hard drive and would like to copy my iPhoto library onto it as a back up. I tried plugging both in and dragging the iPhoto library into the 2nd external harddrive. It looked as though it was working as it said 20 hours, however I then got a message box saying FiNader could not complete the task due to incompatible files. How do I do this please.

lllaass wrote:
Yes, you should format the HD.
A Mac can natively write to a NTSF drive and that is what most drives com formatted with.
You should use the Mac journaled format.
Once again you are posting incorrect information
Until we know what format the drive is it is impossible to state that it must be formatted - that is just a guess
And a Mac can not Natively write to an NTSF drive - it can natively read it but can not write to it with special software
And since formatting a drive erases it it is critical to tell users not to format until they have a positively known good backup
The TOU for these forum state that you should test your answers prior to posting them -- you obviously are not doing that and you advice is endangering users photos - please only post tested answers
LN

USB external hard drive and thumb drive don't work any more...

I have a dual 2GHz PowerPC G5...and i've been using my USB external hard drive and thumb drives for a year with no problems....but now when i plug them in, my mac does not see them...the lights on the external hard drive and thumb drives come on as normal but nothing else...it does this on all the USB ports(front and back) BUT my iPod, keyboard and mouse, and HP printer (that use the same USB ports) works fine....(also i'm running Mac OS X 10.5.2)....help....

You can't transfer songs from iPod to computer using iTunes, except for songs that you purchased from the iTunes Store (you can also re-download them using the iTunes Store Purchased screen). However, there are third-party methods and utilities that can transfer song files from iPod to computer. If you do a Google search on something like "ipod transfer," you should get some links.
Once the song files are on your computer, drag the files (or the folder containing the files) to the iTunes window, to add them to the iTunes library.

Why will photoshop not open after loading it to new iMac computer from an external hard drive and I get this message: Licensing for this product has stopped working:error code: 150:30

Why will Photoshop CS4 not open after loading to new iMac from an external hard drive and I get this message: Licensing for this product has stopped working:error code: 150:30

A Photoshop installation is tied to the machine it was installed on. Moving it to or from a hard drive breaks the licensing.
The answer is easy: Reinstall CS4 from your disc. and apply all updates.
Gene

G5 Tower, replaced hard drive and now can not get it to work- HELP

My G5 (tower) crashed hard & after a trip to the Genius Bar at my local Mac Store I found out the hard drive was dieing.
The Mac person fixed some problem files & told that I could replace the hard drive. I bought a 350 GB SATA 3.5in hard drive and placed it in the second slot in the tower. I then used time machine & backed up the hard drive to the second slot (after I backed up on an external hard drive- just to be safe).
I removed the hard drives & placed the new one in the A slot. When I turned on the computer I had the ? folder. I turned off & restarted holding the option key and got two folders, one with a turn back arrow & a rt facing arrow. Clicked either did nothing. Does any1 know what I am doing wrong?? If so please let me know. Much appreciated.

Did you reset your PRAM?
command-option- p-r
Hold down all four keys as the mac starts up and wait for the chimes to ring twice. Then let the machine start up as usual.
If it works be sure to check your date and time settings (the system will tell you)
You can also start up from your system disk holding down the c key as it starts-- go past the language screen and open disk utilities from the menu bar run disk repair and then repair permissions. Set your startup disk to your new drive.
Hopefully that will take care of the problem.

Working photographer needs help with hard drives and raid O decisions

Hi new here and also new to Mac well almost new been 20 years since i had a mac. i have a Mac Pro Book and this led to ordering the MacPro since I am a working photographer i made a complete switch in platforms so i have some questions and such but I did place a order on Friday for a 2.66 4gbs of Ram , 2 500 gb hard drive and a 30 in monitor and of course the ATI 1900 XT card so yes i am waiting like many for that card.
I put initial 4gb of ram since running CS2 will at least take a max of 3gb's in the memory cache . i plan on getting 2gbs more from OWC since that seems to be the only 3rd party ram at the moment that is working correctly from reading some of the threads here. Having 6gbs is a no brainer really given the amount of Raw processing that i do along with PS work plus having e-mail and other apps open at the same time. The ram to me is the easy part although expensive . My biggest issue is what to do with the 2 hard drive slots and Raid O or not but I will start a thread on that. But i will have 6gbs total for now and the bottom line is you can never have enough ram still holds true.
Now on to my diliemma with hard drives. I did have a raid O scsi 10k rapture and and 10 k scratch on my Dell box and I am just not sure what to do here. i ordered the 2 500 gb hard drive and I may just put them on the storage side of things than get 2 WD 150gb 10 k Sata drives. Now i could Raid O them for 300 gb and get a performace boast that way or i could keep them seperate and put everything on 1 150 drive and ue the second for scratch only. What i don't know is what Mac perfers and what works better. Not worried so much about failure of drives, thats just life in the big city stuff and you just have backups. What i more worried about is performance versus a waste . seems to me that Raid O may not even be needed with these new Intel boxes with all the horsepower going on. Now the other think I notice is the WD 150gb 10 k drives are 1.5 and not 3.0 so is it really faster than the 7200 3.0 single hard drives. I read barefeats shoot out and it seems just getting the right drives in 7200 and Raid O them maybe the answer.
Okay i am not the biggest geek on the planet but I do know my stuff but this is a area that i look for more knowledge on this. So if i can get some sound advice in this area. i know there are many photographers out there like me pushing hundreds of images that could use the same advice. Now let's leave the money end out , folks sometimes think more with there wallet than what works best not that I am opposed to saving money but after spending over 7 k already on this system it becomes a moot point. LOL
www.guymancusophoto.com

Ok your question is if you should RAID O the two 150GB Raptors or not.
I think it was wise for you to get a couple of them for a boot drive with "Time Machine" coming in the next version of Mac OS X. The second drive would make a excellent bootable backup and eliminating downtime if a boot drive dies on you one morning.
In fact any boot drive cloning software that is Mac Intel ready now would do you good.
Now Barefeats has run some tests, and I can pretty much back up what they say from my own experience.
Mac OS X and apps can be helped only so much by a faster boot drive, and a single 10,000 RPM Raptor is enough, RAID O a pair is overkill.
If you install everything on the boot Raptor and keep your space hogging files (except iTunes) in new folders on another drive, even a 7,200 RPM 500GB, the two drives combined is faster as there is nearly no wait. Both drives can be accessed at the same time. Keeping the boot drive slim keeps the stylus (arm) moving as little as possible to get all the small reads/writes Mac OS X needs.
I RAID O-ed my boot drives because 74GB was the largest they had at the time, so combining them gave me speed and larger storage. I hardly use the speed, it only comes in handy if by rare chance I duplicate a 20GB folder, then I can do it in half the time of a 7,200 RPM drive.
Some of the drawbacks of a RAID O set, especially as a boot drive is that I have to auto-clone the whole set to a external drive regularly (I actually do a couple). Since the data path is separated with a RAID O, any drive failure results in total data loss.
So if you RAID O those 150GB Raptors, your going to have to clone 300GB to a external drive (or another internal) regularly, like once a week. This will take considerable time and you can't use the machine while the cloning process is going on. Sure auto-cloning software like DeJaVu can be used at night/weekends, but why bother cloning more than you have to for no big speed increase?
However if your messing with huge Photoshop files that spill over your CS2 3GB RAM limit (you need to have a "scratch" thats as fast as RAM), duplicating large files and other heavy duty drive work, then a boot RAID O will come in handy. Just remember your initial performance of 185 MB p/s will drop about 20-25% when those drives are 3/4 filled. Still 140 MB p/s is extremely good and a no worry situation.
What is worrysome is anything below 80MB p/s (I'm talking uncached 4K write speeds under X-Bench) with a new boot drive and then as time elaspes that boot drive gets filled up and loses half or more of it's inital speed. 30 MB p/s is really slow. Beachball H&LL.
http://www.barefeats.com/hard33b.html
Do Erase W/Zero in Disk Utility all new drives before laying data on them. Drives get subjected to shock which causes bad sectors on the drive. Driver software uses your data as a guinea pig to test the sectors (which you might not be able to recover the file). Zeroing does this without your data, rewriting the bad sector map so your writes are much improved, OS is more stable. etc.

Hard Drive and CD no worki

Similar Messages

Maybe you are looking for