Hard Drive and Wireless
Problem started when I was getting error messages about the hard drive about to die. Made back-up discs and prepared to change out hard drives. This computer is barely over the 1 year warranty. Well, after 3 months, the computer still functions and every once in a while I get the hard drive message. I decided to make the recovery discs but in the process, disc 3 of 4 failed??? Now the Wireless has stopped working. I want to believe Toshiba makes a good product as I am coming up on laptop purchases for my kids, but this whole issue is souring me on the brand. Any ideas? This is a Toshiba Satellite laptop purchased from Best Buy.
Spoiler (Highlight to read)
Thanks for the tip on the recovery disc. I will give that a shot. As for wireless, all other wireless devices in the house are working fine. The computer itself does not seem to recognize and wireless sources either at home, work, or school. I will recheck settings but I know there is one that shows it is off and will not let me click on the option to have it on???? I am hopeful, but concerned, that once I install the new harddrive and load the system restore disc that the problems will be gone. One reason for concern is I tried to restore my computer to a previous date, prior to the internet issue and it did nothing to help.
Similar Messages
-
Airport Time Capsule as Hard Drive and Wireless Router
Hello,
My girlfriend and I want to buy Macbooks. A Macbook Pro 128 GB and a Macbook Air 128 GB. 128GB each is not enough for our needs and are also interested in buying an Airport Time Capsule with 2 TB rather than upgrading to 256GB/512GB, which is more money for less storage space.
My question is, can we use the Airport Time Capsule as a wireless router AND as a wireless hard drive?
Will I be able to keep the Time Capsule at home working as a wireless router for my girlfriend to surf the web and at the same, if I am at the library, as a wireless hard drive via internet so I can download the files i need?
If the network is down I would like to be able to use it via cable as a wired hard drive. Is that possible?
I searched for days for an answer but I could not find a definitive answer to my question.
Thank you!
Best regards,
LiviuMy question is, can we use the Airport Time Capsule as a wireless router AND as a wireless hard drive?
Yes. The Time Capsule has a built-in hard drive and you can add additional USB hard drives (via a USB hub) to its USB port. All of these drives can be shared out and will appear in the Finder as network drives.
Will I be able to keep the Time Capsule at home working as a wireless router for my girlfriend to surf the web and at the same, if I am at the library, as a wireless hard drive via internet so I can download the files i need?
Yes, that is also possible. Please check out the following AirPort User tip for more details on how this can be set up.
If the network is down I would like to be able to use it via cable as a wired hard drive. Is that possible?
If you mean if the wireless network is down can you still access the Time Capsule's hard drive via an Ethernet connection, then the answer is yes. -
Can I connect an externa hard drive and access files from 2 or more computers wirelessly?
Is there a way to connect an external hard drive to my linksys modem and access the files wirelessly by 2 or more computers?
I have a wireless G wrt54G modem working on windows XP a desktop and laptop on my home system. I have a WD “my book” external hard drive with a usb interface. My modem does not have a USB interface.
At work I also have 4 laptops using XP and vista and looking to have them all access an external hard drive and printers. I have not selected a hard drive for the work system.
If yes can I add 2 or more printers and print form all connected computers?
If yes, is it possible to access the files of the external hard drive (home system) via the internet?
Thanks in advance for all your helpFirst, your WRT54G is a router, not a modem. Different function.
Yes, you can "connect an external hard drive... and access the files wirelessly by 2 or more computers," just not that external hard drive. You need one that supports network attachment, with an ethernet connection.
And you can print to printers from various computer, again if the printers are made to support that.
The answer to your last question is maybe. Oh, it's definitely possible, but may require learning about static IP addresses, dynamic DNS, firewalls, port forwarding, file sharing... -
I just formatted my hard drive and I need to find out what my "wireless password is"
I just formatted my hard drive and I need to find out what my "wireless password is". I was in a hurry when I did format my PC that when I got to given my wireless a password, I used the same one as before. Now I have tried to finding what it is for my other products, I don't know where to look. Do I or can I change the password without losing anything? Need help PLEASE
[Personal Information Removed]Hi:
You need to read your router's configuration instructions on how to access the router's menu.
Hopefully you can access that and in the wireless security menu you will find the passkey to use.
Paul -
the macbook air does not work with my belkin 7 port power hub, it is connected to the wall outlet
and i want to use my micorsoft 2000 wireless keyboard and mouse with the hub and two of my
external Buffalo 1TB hard drives and it does not work with any of those items, the hub
works with my macmini, and a Android TV box, no problem but
just this Macbook air that I just bought is not allowing the hub to work.
The devices plugged into the Macbook air work ok when directly into the computer?
I called APPle Care and they said no issues but I read on Amazon and GOOGLE others
are complaining about using Hub with the air not working but Apple care Senior advisor
says no issues so what can I do?
I will take it in to Apple to check the Computer out with this hub and see if it is the hub on another
mac air has the same issue or whatever,the macbook air does not work with my belkin 7 port power hub, it is connected to the wall outlet
and i want to use my micorsoft 2000 wireless keyboard and mouse with the hub and two of my
external Buffalo 1TB hard drives and it does not work with any of those items, the hub
works with my macmini, and a Android TV box, no problem but
just this Macbook air that I just bought is not allowing the hub to work.
The devices plugged into the Macbook air work ok when directly into the computer?
I called APPle Care and they said no issues but I read on Amazon and GOOGLE others
are complaining about using Hub with the air not working but Apple care Senior advisor
says no issues so what can I do?
I will take it in to Apple to check the Computer out with this hub and see if it is the hub on another
mac air has the same issue or whatever, -
What is the Best way to set up Photoshop on a new PC with multiple Hard drives and SSD?
Hi hope someone can help.
I am considering buying a new PC (see below). We want to run both Photoshop and Lightroom on the PC. We will also be using it as a Media centre – that’s why I have two big hard drives.
I would like to know the best way to install both Photoshop and Lightroom on the storage devices. As you can see I will have two 3TB hard drives and one 250G SSD card.
For Photoshop I have read that it can be advantages to have the program on one drive the photos on another drive and the “scratch file’ on a third drive. It was even suggested that the PCs Operating system could be on a different drive than the program. Is this correct and if
so what is best to go on the SSD card? I will be partitioning the Hard Drives and I could even partition the SSD drive if that could help. In this case what size partitions are recommended?
If you can see a component below that you think would be an issue with running Photoshop and Lightroom, could you also let me know what you would recommend?
CPU: Intel Core i7-4790 CPU. LGA1150
Motherboard: Gigabyte GA-Z97M Micro-ATX Motherboard LGA1150
RAM: TWO (2) x Kingston 8GB DDR3 1600Mhz Desktop Memory
HDD: TWO (2) x Seagate Barracuda 3TB 3.5" 7200RPM 64 MB Cache SATA 6.0Gb/s
SSD: Samsung 850 EVO 250GB Internal Solid State Drive (SSD)
Graphics card: Leadtek nVidia Quadro K2200 4GB Graphic Card
Optical drive: LG Blu-Ray Combo Drive. BH16NS40
Power supply unit: Cooler Master V750S ATX Power Supply 750W, 80Plus Gold Certified
Case: Cooler Master Centurion 6Mid Tower Case
Operating system: Microsoft Windows 8.1 Pro 64-bit
Wireless / WiFi: TP-Link TL-WDN4800 900Mbps Wireless-N Dual Band PCI-E Adapter
BTW I would have liked to email this to Adobe support but could not find an email address to send it to. I hope this way works.That's a nice system Kevin, and it will work very nicely with Photoshop. I do take it that you have 16Gb RAM in Total?
250Gb SSD is a good size, but you can still run short, and that will affect Windows performance. When you get your system, instal WinDirStat which gives you a graphic display of everything on your drive, like below. Clicking on any of the large areas will tell you what and where they are, so you can think about moving cache folders etc. to one of the HDDs.
Leave the Pagefile.sys on the boot drive. Think about disabling Hyphenate as it takes a ton of space, and too often crashes on wake up.
My Documents
Desktop
Downloads
Look at Bridge cache
iTunes backup
Other stuff like that.
Think about another 500Gb drive just for Photoshop Scratch. Drives are cheap as chips nowadays
Do yourself a favour, and invest $100 in Shadow Protect (or similar if there is such a thing) SP saves incremental backups every 15 minutes (you can set the interval, but it has no impact on performance with a system like yours). If you have a problem you can mount the back up at any of those 15 minute points, and open files from it. You can also make a bootable DVD image of your C drive, and be back up and running five minutes after disaster strikes.
Optimize Performance in Photoshop
Photoshop CC and CC 2014 GPU FAQ
For more ideas, swing by the Premiere Pro Hardware forum. Those guys are serious good at this stuff, and you'll find links tips and ideas.
Happy computing, and have fun with your Creative Cloud® apps. -
Move PC iTunes library to external hard drive and consolidate with iMac
Hi, I have a PC that I'm not using much. I have a ton of iTunes music files on it so I went through the process of copying these files to my networked external hard drive. I have my iMac connected wirelessly to this same hard drive. I went into the System Preferences on the iMac to tell it where it could find the new library and I pointed it to the iTunes folder but there is not an iTunes Media folder like many of the articles state, like this one: http://support.apple.com/kb/HT1449
Do I need to create an iTunes Media folder? Note this is an iTunes Library that was on a PC, moved to a networked external hard drive and will be used on my new iMac.
Thanks.kneedragger101 wrote:
Note this is an iTunes Library that was on a PC
you might want to read these articles: one and two.
why not move your media files using _*Home Sharing*_ ? -
External hard drive and time capsule
hi all - I have my new TC set up and my external HDD connected to it. The TC is working for backups and wireless. However, the external HDD is not showing up in the finder window. Any ideas on how I can get access to it?
I am going nuts trying to get this to work.
I have a MyBook 1TB Home Edition.
I have tried the following:
1. Formatted it as suggested and every other way available in DiskUtility. I even tried the different partition settings.
2. Updated the firmware on both the MyBook and TC.
3. Booting the TC with the drive attached and without it attached.
4. Setup AirPort Utility to have TC share drives.
5. Reset all setting on the TC.
My MacBook reads the external hard drive and TC just fine.
My AppleTV reads the MyBook just fine.
I can not figure out why my TC will not read my hard drive.
Can anybody help? Do I have a bad TC? Everything else on it works great. -
I purchased a used 1st Gen Time Capsule with a 1 tb hard drive.
When I plugged it in and did the initial setup, it worked fine, but gave me a hard drive error. A few minutes later the green light turned solid orange, then blinking orange, then the status light went off. The lights in back stayed on.
I removed the hard drive and rebooted, it turned green for 5-10 minutes then reverted back to a solid orange, blinking orange, then went off.
Next I purchased a remanufactured internal power supply, and installed it (without the hard drive in). It turned green almost immediately. After about 15-20 minutes, I decided to try to install the hard drive again, booted it up, and tried to erase the hard drive with was working properly according to the software. It stopped erasing the disc after about 20 minutes and turned solid orange again, then blinking, then no status light (but back lights were still lit).
I'm a bit flabbergasted at this point, any suggestions on what to do next? I think i've pretty much replaced everything except the logic board, but can't seem to find any information on the symptoms of a logic board malfunction.
Thanks!!!!!!!A Gen3 is identical board to a Gen4 although they have some differences in firmware and wireless card was updated on every model.. but a Gen3 is substantially faster than Gen1, Gen2 which also have identical boards.
You can with careful shopping get a Gen3 pretty cheap.
Most use a delta power supply which I think is a lot better than the flextronics used in most Gen1/2
You can sell back the parts to ebay.. people still would buy the power supply etc. Even just the case can be useful to a repairer.
But if the board is gone.. it is hard to repair.. not impossible.. but hard.
Gen 3 and Gen 4 are not without faults.
See this page.
https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair/new-issue-with-a1355-gen-3-tc
I have fixed it a different way.. by using the small converters you can buy in bulk from ebay for $1 each.. KIS3R33 .. they produce 3.3V at 2A peaking at 3A.. amazing.. I keep using them to replace onboard power converters by removing the inductor and simply power directly.. the end result has worked great. You can simply change the resistors around and get any output from 1v to 20v depending on input.
Is it worth doing it .. no of course not.. it will waste many more hours than $50 is worth.. but it is kind of fun that you can actually make things work again.
Here is a pic of the Gen 3 totally powered by me. All onboard power removed.
This was to track down the fault in the Gen3.. but I am kind of pleased that it ended up neat enough and reliable enough to work for more than a year.. the Gen3 still serves as a way to get Netflix via network for a friend running 24/7.
The units supply (from left to right)
1v, 1.1v, 3.3v, 5v, 1.8v
It is feed by 12v supply which is also directly connected to the hard disk.
So it is possible to fix.. !! Only got to be a bit crazy. -
How to use time capsule as hard drive and connect with existing net gear router
I have a netgear D6300 router, which i use to connect to internet - which is excellent so far for my downloads and games etc for my PS4 and hence am keen to continue using it. I bought the Airport time capsule for wireless storage, and when i set it up, I was advised on setup to connect the TC to my router, and it did what it needed to do.
Now, in order to connect to internet, i need to connect wifi to net gear router, but to access time capsule, i need to change wifi connection to my newly created wifi network with TC.
I want to use TC as a backup storage for my mac (its a 3TB TC), but also, my laptop has only 500gb hard drive which is now half full from downloads, so i want to transfer all my downloads to my TC and use it as an external hard drive, and future downloads to TC - but when i connect to wifi of TC, i can copy my folder on my mac, but not paste it to TC in finder. (the only thing in TC is an image of tmg of my macbook from first backup.).
How do i use TC as an external HD - there wasn't much difference in price of external wifi/wireless HD between non-TC and TC at 3gb, so i just thought i'd go for the airport TC option.
And is it possible to keep connected to wifi internet via net gear router, AND wifi TC - the whole point i bought it (from US shipped to australia on eBay, therefore not able to send back) was to use TC as external large HD via wifi, but keep my net gear router going.
Surely there is a way to not having to flick between wifi connections of TC and net gear internet.
When i'm connected to TC, i can't access internet, only TC.
And I don't really want to connect TC to my router via ethernet cable, as too many cables.
This can't be a difficult situation to manage, but i'm not sure how to do it.
ThanksAnd I don't really want to connect TC to my router via ethernet cable, as too many cables.
Sorry but you have very little choice.
The TC can join to a wireless network.. but it is flakey, poor, slow and highly NOT recommended way to do things.
Nevertheless if you want to give it a try .. here is the method.
How do I setup my time capsule with wireless internet?
You SHOULD, plug the TC into the Netgear and run it in bridge mode.. you set the wireless to create a wireless network.. then when you connect to the TC it will be also connected to the internet and fast.
(if you don't do that you may as well have used a USB drive plugged into the Netgear, as it would be just as good).
TC is not actually designed for mixing Time Machine backups and files.. but if you are just storing downloads that is ok.. but I strongly recommend you use a DMG or sparsebundle to prevent the TM and the data from messing each other.
See Pondini instructions here.
Q http://pondini.org/TM/Time_Capsule.html -
I'm getting the grey screen during start up and can't boot the computer - MacBook Pro with lion.
I did a command r after doing some research but got nervous that it would automatically wipe my hard drive and reinstall OS.
I was nervous because it asked me for language for software use before any options were presented (such as repair via disk utility). It looked similar to an OS install.So I powered off....Is there a risk at command r will result in wiped HD without me actively making that choice?Repair the Hard Drive and Permissions - Mavericks, Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is
three times faster than wireless. -
Would it be worthwhile to put in a larger hard drive and boost the memory on our early 2008 iMac? We realize it is on borrowed time but we would like to squeeze a little more time out of it.
Problem description:
This iMac is running awfully slow, and freezes up often
EtreCheck version: 2.1.5 (108)
Report generated December 20, 2014 at 1:40:32 PM CST
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
iMac (24-inch, Early 2008) (Verified)
iMac - model: iMac8,1
1 2.8 GHz Intel Core 2 Duo CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR2 SDRAM 800 MHz ok
BANK 1/DIMM1
2 GB DDR2 SDRAM 800 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
ATI Radeon HD 2600 Pro - VRAM: 256 MB
iMac 1920 x 1200
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 21:42:10
Disk Information: ℹ️
Hitachi HDP725032GLA380 disk0 : (320.07 GB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 319.21 GB (204.84 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple Inc. Built-in iSight
Logitech USB Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.seagate.driver.PowSecDriverCore (5.0.1) [Support]
/System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.0.1) [Support]
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.0.1) [Support]
[not loaded] com.seagate.driver.SeagateDriveIcons (5.0.1) [Support]
Startup Items: ℹ️
HP IO: Path: /Library/StartupItems/HP IO
Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
[running] com.seagate.SeagateStorageGauge.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[running] com.memeo.Memeod.plist [Support]
User Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist [Support]
[invalid?] com.leadertech.PowerRegister.EPS2.fa8d34509cfddcea6fdfd2f145193825.plist [Support]
User Login Items: ℹ️
iTunesHelper UNKNOWN (missing value)
Internet Plug-ins: ℹ️
DirectorShockwave: Version: 11.5.0r600 [Support]
Flash Player: Version: 15.0.0.246 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
FlashPlayer-10.6: Version: 15.0.0.246 - SDK 10.6 [Support]
iPhotoPhotocast: Version: 7.0
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 537 - SDK 10.9
User internet Plug-ins: ℹ️
BrowserPlus_2.9.8: Version: 2.9.8 [Support]
Move-Media-Player: Version: npmnqmp 071505000006 [Support]
3rd Party Preference Panes: ℹ️
BrowserPlus [Support]
Flash Player [Support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Destinations:
FreeAgent GoFlex Drive [Local]
Total size: 1.00 TB
Total number of backups: 1
Oldest backup: 2014-06-08 05:27:16 +0000
Last backup: 2014-06-08 05:27:16 +0000
Size of backup disk: Excellent
Backup size 1.00 TB > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
2% WindowServer
2% com.apple.WebKit.WebContent
1% fontd
0% AppleSpell
0% aosnotifyd
Top Processes by Memory: ℹ️
292 MB Safari
219 MB com.apple.WebKit.WebContent
180 MB mds_stores
150 MB softwareupdated
120 MB installd
Virtual Memory Information: ℹ️
1.61 GB Free RAM
1.86 GB Active RAM
277 MB Inactive RAM
543 MB Wired RAM
626 MB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Dec 19, 2014, 03:58:57 PM Self test - passed -
Need help on connecting USB: 300GB external hard drive to wireless router
Hello,
I am trying to connect USB2.0 Maxtor 300GB external hard drive to my wireless router. Tried using Linksys new product NSLU2 which allows any USB cable external hard drive to NSLU2 device/network storage hub and then connect this NSLU2 directly to wireless router with the help of 10/100 Ethernet cable which allows to access external hard drive wirelessly.
Unfortunately Linksys NSLU2 is designed to supports USB external drives up to 250GB only.
Can any one advice me if there is any device I can use to connect my external hard drive to wireless router and access files without connecting/carrying USB external drive?
Any help is greatly appreciated.
Thanks in advance!
ArvindHave a look at http://www.ximeta.com and their solutions. Especially
http://www.ximeta.com/web/products/ndenclosure1_en.php might be interesting, as you already have a HD.
Regards, Martin -
I have an 2tb time capsule 802.11n Wi-Fi base station can I use this as an external hard drive and use a new airport extreme 802.11ac Wi-Fi for my wifi?
You can use the 2 TB Time Capsule as a network drive. That means that it must connect to one of the Ethernet LAN <--> ports on the new AirPort Extreme, or connect to the network using wireless.
-
I replaced my hard drive and lost iPhoto. Is there a way to retrieve? I can not find the starter discs that came with my Macbook Pro.
Customer Service: Contacting Apple for support and service - this includes international calling numbers. You can purchase replacement discs from Apple.
Or, you can upgrade to Lion or Mountain Lion:
Upgrading from Snow Leopard to Lion or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99.
If you sign into the App Store and try to purchase Mountain Lion but the App Store says your computer is not compatible then you may still be able to upgrade to Lion per the following information.
A. Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mountain Lion - System Requirements
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table - RoaringApps.
For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.
B. Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply.
Maybe you are looking for
-
Sharepoint 2010 foundation list open(export) to Access button disable?
1. Why In sharepoint 2010 foundation list "Open with Access" button is disabled? 2. Some PCs don't even able to see the "Open with Access" button in datasheet view?
-
I can't find a phone. Please help.
Seem to be spinning my wheels here. I re-upped my cell phone plan on Saturday and bought an LG Xenon. The hoops I have to jump through to sync with my data on my Mac are too much. I need to exchange it, but I've spent hours on the web and the phone b
-
Random speedups & no audio when viewing video?
I've been having this odd occurence with my i5 macbook air 2013 on Mavericks. Sometimes, when I am viewing a video, the video would randomly speed up for a second, then resume to normal speed with no sound. After several seconds, the sound would retu
-
Outer join with first of zero or more rows
Hi! I'm trying to make a join where one part is the first row of zero or more rows. I seem to be getting much poorer performance than I ought to be able to. My tables Node and RelayGroup have 6000 and 3000 rows respectively, while the CommandHist tab
-
I am with Apple since the times of Kodiac, and I have never experience such a nightmare upgrading the OSx. I don't know what to do and the senior advisors of Apple care they don't know either, (what is worst) - Mail Doesn't work, it doesn't sync gmai