Hard drive available space shown incorrectly in finder

Hi,
I noticed that my Finder status bar shows incorrect amount of available space. Actually the amount of available space is larger that the actual disk size. The same problem is experienced if I click "Get Info" on my Macintosh HD. It also shows drive capacity as 249.82GB and Available as 252.7GB.
All the other tools, for example Disk Utility and About this Mac/Storage show the correct information, which is that I have 115.46GB of free space on my Macintosh HD.
Any idea what could cause this? Or has anyone else experienced similar problems?
Oh, and I have Filevault 2 turned on.
//ilari

Maybe I should be a bit more specific:
Currently the Get Info for Macintosh HD shows the following:
Capacity: 249.82 GB
Available: 282.69 GB
Used: -- bytes (-- KB on disk)
While for example df -k shows the following (which is accurate):
$ df -k
Filesystem                        1024-blocks      Used Available Capacity  Mounted on
/dev/disk1                          243966468 152025216  91685252    63%    /
devfs                                     181       181         0   100%    /dev
map -hosts                                  0         0         0   100%    /net
map auto_home                               0         0         0   100%    /home
localhost:/ezioMnNoyRVU8Vj-YxC4cJ   243966468 243966468         0   100%    /Volumes/MobileBackups
No matter which way you look at it, the Finder currently calculates the available (free) space incorrectly.
//ilari

Similar Messages

  • False Hard Drive Available Space Reading

    Yesterday, I was adding a partition to my hard drive. i was going to create "Macintosh HD_2". i had 90GB left on my 160GB hard drive and the partition i was creating was about 70GB. Halfway through the partitioning process, a message prompted that my mac needed to be restarted. After restarting... i opened a finder window and there was only one disk image "Mactinosh HD". there was no HD_2. here comes the frustrating part... my macintosh HD has only 20 GB of free space left, almost as if there was a partition taking up the other 70GB... but, like i said, the other disk image is nowhere to be seen. this isn't the first time this has happened, when i had OS 10.5.1, i tried to do the same thing, with the exact same results. when apple released OS 10.5.2, it fixed the problem. I dont really want to wait for 10.5.3 for this to be fixed... Any ideas?

    Does Disk Utility still show your total hard drive capacity as 160 GB, or does it show it as being 70 GB or so smaller? If it still shows as 160 GB, then it looks like the partition you attempted to create may have created some sort of file that is taking up space. If your total hard drive capacity has changed to 90 GB (160 GB - 70 GB), then it would seem that you have created a partition that you cannot see.
    Assuming that your drive still shows as 160 GB, you can try to see what is taking up the space by using WhatSize or Disk Inventory X:
    http://www.id-design.com/software/whatsize/
    http://www.derlien.com
    Disk Inventory X if free. WhatSize used to be, but there is a small charge now.
    One of these should be able to tell you what is occupying 70 GB.
    Also, it's good practice to keep 15%-20% of your hard drive free for best operation of the OS. 20% of 160 GB would be 32 GB. Your partition would have left just 20 GB. Don't know, but this might be part of the problem.
    Good luck!

  • Where did my hard drive available space go?

    I partitioned my hard drive to for bootcamp last week (100GB) and then decided that I didn't want it anymore, so I attempted to remove the partition.  Now, whenever I start my computer it seems boot to an empty partition - I just get a black screen that tells me to insert a disk (or something of that sort).  For some reason that is the default - I have to hold the "option" key to be able to boot up to my Mac side.  It looks like I need to change the defaulty boot disk - I could do this on a PC, but don't know how to on a Mac.
    My biggest problem, however, is that even though I got rid of the second partition, I haven't seemed to get back the 100GB.  When I go into the Disk Utility it shows that I have 499.76GB Capacity, but only 359.3GB Available and 39.7GB Used.  (I am assuming that Capacity = Available + Used, other at least close to) Where did the other 100GB go and how can I get it back?
    Thanks in advance,
    Mike

    Hi entresoft,
    I am not sure how to do this. I am not a very literate computer person but have a vague idea of what you are suggesting.
    If I do manage to figure out how to do what you have suggested will this restore my iPhoto Library and I assume maybe other files?
    Thanks!

  • When looking at my "About This Mac" it says that I have 60gb of space left on my hard drive, but when I go into finder to find all of these files there is not 300gb worth in anything I search, even searching, "All files on the Mac". Help!?

    When looking at my "About This Mac" it says that I have 60gb of space left on my hard drive, but when I go into finder to find all of these files there is not 300gb worth in anything I search, even searching, "All files on the Mac". Help!?
    It says I have over 150 gigs of video on my hard drive. But I have gone through and deleted almost all of what shows up, still it says there is roughly the same amount on the hard drive. Where are these files? I want to delete them so I can have my hard drive clear.
    Thanks for your help guys!

    Quote from the article.
    Time Machine in OS X Lion includes a new feature called "local snapshots" that keeps copies of files you create, modify or delete on your internal disk. Local snapshots compliment regular Time Machine backups (that are stored on your external disk or Time Capsule) giving you a "safety net" for times when you might be away from your external backup disk or Time Capsule and accidentally delete a file.
    So what makes a notebook any different then a desktop, other then with a desktop you might have your tm backup drive connected all the time.
    The object here is to not indiscriminately delete files you need or want to keep. I personally have never deleted a file I wanted to keep.
    In essence a backup is for catastrophic failure of your system. So it can be restored once that failure has been fixed. Not because you go in willy nilly and start deleting files.

  • Please could somebody help me I have an iMac which came with Tiger 10.4.10 installed I have lost my disks and I need to re-install after a hard drive failure. Where can I find this? I will upgrade to Snow Leopard after but I cannot go straight to SL

    Please could somebody help me I have an iMac which came with Tiger 10.4.10 installed I have lost my disks and I need to re-install after a hard drive failure. Where can I find this? I will upgrade to Snow Leopard after but I cannot go straight to SL

    You can go strait to SL, all you need is a retail SL DVD available from Apple for $20. The US online store has them at:
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard

  • Hi, Can anyone recommended software to import dvd to iMovies. I need to import about a dozen homemade DVD's and edit them into a single DVD comprising the 'best bits'. How best can I do this. I have an external hard drive available for the job

    Hi, Can anyone recommended software to import dvd to iMovies. I need to import about a dozen homemade DVD's and edit them into a single DVD comprising the 'best bits'. How best can I do this. I have an external hard drive available for the job

    You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
    http://www.squared5.com/svideo/mpeg-streamclip-mac.html
    which is free, but you must also have the  Apple mpeg2 plugin :
    http://store.apple.com/us/product/D2187Z/A/quicktime-mpeg-2-playback-component-f or-mac-os-x
    (unless you are running Lion in which case see below))
    which is a mere $20.
    Another possibility is to use DVDxDV:
    http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
    which costs $25.
    For the benefit of others who may read this thread:
    Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
    And from the TOU of these forums:
    Keep within the Law
    No material may be submitted that is intended to promote or commit an illegal act.
    Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
    If you are running Lion or later:
    From the MPEG Streamclip homepage
    The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion onwards, however MPEG Streamclip still needs it. See this:
    http://support.apple.com/kb/HT3381
    To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
    The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. (The same applies to Mountain Lion even though that has it preinstalled.) You don't have to install QuickTime 7.

  • I have iMovie 09. I just erased my external hard drive, but it is still formatted for the mac. However, iMovie will not recognize the hard drive. It shows the only hard drive available is the computers. How do I get the external hard drive to show up?

    I have iMovie 09. I just erased my external hard drive, but it is still formatted for the mac. However, iMovie will not recognize the hard drive. It shows the only hard drive available is the computers. How do I get the external hard drive to show up?

    In Finder's Menu, select Go menu>Go to Folder, and go to "/volumes". (no quotes)
    Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
    Drives with an extra 1 on the end have a side-effect of mounting a drive with the same name as the system already think exists. Try trashing the duplicates with a 1 or 2 if there are no real files in them, and reboot.
    If it does contain data...
    http://support.apple.com/kb/TS2474

  • Does iCloud drive use up hard drive storage space?

    HI,
    I want to save hard drive space and use iCloud Drive to store my documents, pictures etc. I have the iCloud drive folder set up in my finder. I have been copying and pasting data in there, but it seems whenever I do; the hard drive storage space decreases.
    I thought the entire point of iCloud was to use cloud storage and not offline storage; unless you download it from the cloud to your hard drive. Why am I losing hard drive space?
    Any help you can offer or suggestions would be very much appreciated

    Hi FlyFalcon,
    I am writing to say that I am having the problem you are worried about. I have a 121 GB MacBook with flash storage, and I am running out of room.
    This is my work computer so I don't have any personal photos/music/movies stored on here. My iCloud drive has over 100 GB on it and it's driving this computer nuts! I am constantly getting the "your startup disk is full" message. As you can see from the screen shot below, it's saying I have 58.61 GB of photos on this computer, 25.84GB of movies etc...but all these files live on my personal MacBook at home.
    I am paying for the $3.99 a month for 200 GB but I didn't get that iCloud would use up my HD space. So as a warning, 128 GB may not be enough for you.

  • Hard drive free space discrepancy

    I have an 11 inch Macbook Air with a 120GB SSD and I am running OS X Lion 10.7.5.
    Every so often I get messages indicating my hard drive is nearly full. Since it is a small hard drive I never thought much of it and just deleted a movie or two I put on it for when I travel. But lately I realized that I keep all my music, photos, and bulk of my movie files on an external drive, so there really isn’t much on my computer.
    When I add up all the files listed under My Mac HD in the finder, I get 62 GB. Add in the operating system and I come up with 75 GB of the SSD used. When I look at the storage summary on “About this Mac”, it says I am using 94 GB. There is about a 19 GB discrepancy. Does anyone know what could cause this and where 19 GB of data can be hiding?
    Hard drive free space discrepancy

    Use a tool like OmniDiskSweeper 1.8 to find what's on the disk, where, and how large.
    Freeing Up Space on The Hard Drive
      1. See Lion's Storage Display.
      2. You can remove data from your Home folder except for the /Home/Library/ folder.
      3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
      4. Also see Freeing space on your Mac OS X startup disk.
      5. See Where did my Disk Space go?.
      6. See The Storage Display.
    You must Empty the Trash in order to recover the space they occupied on the hard drive.
    You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.

  • I have a 4th gen 20G ipod whose hard drive has died.  Are replacement hard drives available through the apple store?

    I have a 4th gen 20G ipod whose hard drive has died.  Are replacement hard drives available through the apple store?

    I don't think Apple will do that repair for you, because the iPod is too old.  I believe the hard drive type used in 4th gen and older iPods is no longer produced.  There may be non-Apple shops who can do the repair, but they may be using a working part salvaged from a used iPod.
    If you want to do the repair work yourself, and you are good at such things, this web site has repair guides
    http://www.ifixit.com/Device/iPod_Original
    (There are probably also YouTube videos on the topic.)
    NOTE:  There are two hard drive physical sizes.  The thick version has two platters, and corresponds to the "thick" iPods (with double storage capacity).  A 4th gen 20GB model should be the thin version.  The hard drive used in iPods up to 4th gen should work interchangeably, but 5th gen and later iPods use a different type.
    I have a 4th gen iPod that started out as a 20GB.  The hard drive failed, so I put a compact flash card on an adapter in there.  The adapter is like this one (I bought it a few years ago so it's probably not the same seller)
    http://www.ebay.com/itm/NEW-Compact-Flash-CF-SSD-To-Toshiba-IPod-1-8-inch-Adapte r-Black-/121174875639
    The compact flash card is standard; I bought the cheapest one.  I currently have an 8GB card in there, but prices have come down, so I may get a 64GB card soon.  It works great with the 8GB card.  No more hard drive spin-up delay.  Battery lasts longer.  It's lighter.  And it should be more shock resistant.
    The only mod I needed to make on the adapter was to bend over two pins 90º, where you place a jumper to set the drive to "master."  The adapter plus CF card is actually smaller and thinner than just original 1.8-inch Toshiba hard drive; I used some thin foam packing material (cut to the right shape) to take up the excess space and ensure the adapter and card did not become disconnected.
    The 4th gen iPod has excellent sound, compared to some later iPods.

  • In my Apple Macbook Air, most of the USB Flash/Thumb Drives are not shown in the Finder Window. Only a few Brands of USB /Flash Thumb Drives are shown or compatible or shown in the Finder. How do I use any Flash/Thumb Drive with my Apple MacAir?

    In my Apple Macbook Air, most of the USB Flash/Thumb Drives are not shown in the Finder Window. Only a few Brands of USB /Flash Thumb Drives are shown or compatible or shown in the Finder. How do I use any Flash/Thumb Drive with my Apple MacAir?

    Yes, junker thumb drives pour like rain in the market.  
    Which makes are working on your Air, and which arent?
    Stick to Sandisk and a couple of other reliable mfg. of memory sticks

  • My user folder has disappeared from my hard drive though if I do a find for it it says it is still there. Anyone know how to restore it. I can drag a duplicate from the find window onto the hard drive but don't want two copies with one hidden.

    My user folder has suddenly disappeared from my hard drive though if I do a find for it it comes up as still being there with all its data. Can drag a duplicate copy from the find window back onto the hard drive but don't want two copies there with one of them hidden. Any suggestions anyone?

    Did you update to 10.9.3?
    If you did then update to iTunes 11.2.1.
    That is the fix for that problem.
    Allan

  • My external hard drive doesn't show up in finder, is it dead?

    My external hard drive doesn't show up in finder.Time machine can't find it. Does this mean my external hard drive is dead?
    I borrowed a friends and switched mine with hers. My acted the same way in her macbook. I switched the cords on the external drives, no change.
    Also, Is there a way to retrieve the information from my sick external hard drive? Thanks for your help.

    If the Disk Utility sees it, you might be able to repair it or recover the data on it with a product such as DiskWarrior or Data Rescue.
    If the Disk Utility doesn't see it, contact professional support.
    (64290)

  • External Hard Drive does not show up in Finder

    My external hard drive is not showing up in Finder.
    It shows up in Disc Utility, but I do not have access to it. I have tried the following:
    command-shift c, nothing happens
    confirmed in Preferences/General that external hard drive was checked
    tried another cable
    tried another port on the back of the external drive
    tried to connect through the USB port
    re-started, etc.

    zone-5 wrote:
    I have same problem after installing OS 10.5.8. Disk utility sees the hard drive, the computer does not. Disk utility says invalid node structure. Volume check failed. Filesystem verify or repair failed.
    That means the directory is corrupt. If you have a heavy-duty 3rd-party disk repair app, such as +Disk Warrior,+ it may be able to fix it. Otherwise, your only option is to erase and reformat the disk. They're not cheap -- Disk Warrior is about $100. And for Leopard, you need version 4.1.1 or 4.2.
    I have not been able to figure out how to start a new topic here, but did find this discussion, which fits me fairly close.
    Just above the list of topics, on the left, is a +Post New Topic+ option.

  • I havev installed a new Hard Drive on my laptop but cannot find my Photoshop Elements product box with the serial number to install Elements 10 or Elememts Premier 10. How can I find out the serial / installation codes for these?

    I havev installed a new Hard Drive on my laptop but cannot find my Photoshop Elements product box with the serial number to install Elements 10 or Elememts Premier 10. How can I find out the serial / installation codes for these? I saw a reply however, it was not my name and assumed it was for someone else. Now timed out. Can UI still have help on this matter please?

    If you registered PSE before, go to the main page of adobe.com, sign in and go to your account and you should find the serial number there in your purchases.

Maybe you are looking for

  • Image no show

    Hi, Sorry posted in HTML section and reposted here as thought this was more appropriate place for query. Not having the budget to pay for a website to be developed I set up my own using some helpful templates and tutorials (www.actionresearch.ltd.uk)

  • CASE statement in SQL Server

    I am working on a project for ambulance response times. In the following query which is in my coldfusion code, I am using a CASE statement on a subquery to count the ambulance response times in bins. An ambulance should arrive at an emergency inciden

  • Is partial update possible?

    Hi, is it possible to have Toplink perform partial update of an object, instead of all the attributes. What I need is exactly the same feature as Toplink's support for partial reading where you can specify which fields to retrieve from database. It's

  • MY JPEG STILLS LOOK AWFUL!

    OK, Here's my deal... I am editing a photo-slide show for a photographer who has taken very high resolution photos and given them to me as JPEGS. After spending days composing an edit with key-frames (a la ken burns effect), I exported it only to lea

  • Cube Logical table source doesn't show all cube members

    hi, Please help me solve this issue. I have a logical dimension table whcih has a source from 10 different LTS each of them is a cube and have different number of members in it Cube 1 has 1 member say A. Cube 2 has 1 member say A. Cube 10 has 3 membe