Hard drive backup for sending powerbook in for repair

I'm not sure how to ask this in mac speak so please bare with me.
I'm about to send my Powerbook in for repair (mechanical not software) I want to backup my HDD so that in the event that something happens I can restore my powerbook to the condition it was in before it went to the shop.
Although I've done this hundreds of times on PC's I'm not familiar with what the mac equivalent to a disc imaging software would be.
Any insight would be apreciated.

I use Déjà Vu, and its cloning instructions (in the ? icon at the bottom). In addition to creating a boot-able backup on an external FireWire drive, you can schedule backups of project folders and settings, or just your home folder to said drive. I usually keep nearly everything I work on in one projects folder to simplify things. A weekly backup of your home folder will also help you keep settings that change over time too.
Additionally, you'll want to insure that the external FireWire drive is the same or larger than your original built-in drive (and faster is better, but more expensive, and 2.5" form factor drives can also be more portable since they don't require a power cable), so that you can utilize its Safety Net backups (copies of deleted/changed items).
http://propagandaprod.com/dejavu.html

Similar Messages

After install of Lion, secondary internal hard drive used for backup and time machine is not showing on the desktop.

After an install of Lion, my secondary internal hard drive used for backup and time machine is not showing on the desktop. Cannot be located with Disk Utility either. Contains vital files! please help...

I have a TB internal drive, but this is what it shows for memory slots:
Memory Slots:
ECC:    Enabled
DIMM Riser B/DIMM 1:
Size:    2 GB
Type:    DDR2 FB-DIMM
Speed:    800 MHz
Status:    OK
Manufacturer:    0x0000
Part Number:    0x000000463732353642363145353830304600
Serial Number:    0x00000000
DIMM Riser B/DIMM 2:
Size:    2 GB
Type:    DDR2 FB-DIMM
Speed:    800 MHz
Status:    OK
Manufacturer:    0x0000
Part Number:    0x000000463732353642363145353830304600
Serial Number:    0x00000000
DIMM Riser A/DIMM 1:
Size:    1 GB
Type:    DDR2 FB-DIMM
Speed:    800 MHz
Status:    OK
Manufacturer:    0x80AD
Part Number:    0x48594D5035313241373243503844332D5335
Serial Number:    0x42076007
DIMM Riser A/DIMM 2:
Size:    1 GB
Type:    DDR2 FB-DIMM
Speed:    800 MHz
Status:    OK
Manufacturer:    0x80AD
Part Number:    0x48594D5035313241373243503844332D5335
Serial Number:    0x4207631E
DIMM Riser B/DIMM 3:
Size:    Empty
Type:    Empty
Speed:    Empty
Status:    Empty
Manufacturer:    Empty
Part Number:    Empty
Serial Number:    Empty
DIMM Riser B/DIMM 4:
Size:    Empty
Type:    Empty
Speed:    Empty
Status:    Empty
Manufacturer:    Empty
Part Number:    Empty
Serial Number:    Empty
DIMM Riser A/DIMM 3:
Size:    Empty
Type:    Empty
Speed:    Empty
Status:    Empty
Manufacturer:    Empty
Part Number:    Empty
Serial Number:    Empty
DIMM Riser A/DIMM 4:
Size:    Empty
Type:    Empty
Speed:    Empty
Status:    Empty
Manufacturer:    Empty
Part Number:    Empty
Serial Number:    Empty

Max Hard drive size for Powerbook 1.5

I need to increase the internal hard drive on my '15 Powerbook 1.5Ghz. What is the max size that the Powerbook can handle? I would like to get one that's at least 160g.

The maximum drive size that your PB can handle is far larger than any currently available drive. The largest drive available (or likely to become available) is this 320GB Western Digital drive:
http://www.newegg.com/Product/Product.aspx?Item=N82E16822136345
It's also available from other vendors, of course; to find other vendors selling it, just Google its Western Digital model number.

My itunes library was on my PC. About two years ago I switched it to my Seagate server/hardrive. (itunes-preferences-advanced-change library). Last summer (2012) I bought a macbook, which seems to access the seagate server hard drive fine for word docs,

My itunes library was on my PC. About two years ago I switched it to my Seagate server/hardrive. (itunes-preferences-advanced-change library). Last summer (2012) I bought a macbook, which seems to access the seagate server hard drive fine for word docs, excel spreadsheets,etc. It also seems to have started its own library which is not complete. My PC died this summer (I still have it though).
Now when syncing any of the multiple devices (ipods,ipads, iphones) that we have with my mac book, itunes states that "an error occurred" or the "app cannot be found". Itunes wants me to erase the device and sync with my macbook. The message "The iPhone “Renee’s iPhone” is synced with another iTunes library on “Renee PC”. Do you want to erase this iPhone and sync with this iTunes library? An iPhone can be synced with only one iTunes library at a time. Erasing and syncing replaces the contents of this iPhone with the contents of this iTunes library."appears.
Any assistance would be greatly appreciated.
Renee

u can give try to using external enclosre and backup ur files. I hope u will get files back. or using external enclosre with ur hdd boot into Linux and try to mount ur harddisk.
there are multiple no of tutorial to mount apple partion in Linux.

External hard drive setup for time machine reading as a virtual cd

Why is my MacBook Pro reading my external hard drive setup for time machine reading as a virtual cd?
Thanks

Hi Christian,
Is this something that has happened from the start? If so, I would reformat the disk and setup TM from scratch again.
Prepare the external HD by connecting to the Mac, open Disk Utility, select the manufacturer’s name of the external HD, select Partition and choose GUID Partition Table, format to Apple OS Extended (Journaled); quit Disk Utility.
Open System Preferences.
Click on Time Machine.
Click on “Select Disk.”
Click just to the left of "On" to turn TM on if it's not already on.
Click on the disk or partition you want to use.
Click on “Use for backup.”
Leave external HD connected, and TM will automatically do its thing.

Hard Drive configuration for speed

I've got a question regarding the best hard drive configuration for my mac pro. I'm looking to increase the boot speed, application load speed and particularly the speed with which hard drive intensive photoshop processes complete. Right now I'm just using some normal SATA II drives. I'd appreciate it if you could give me some feedback on the various options I am currently considering.
-2x 64GB SSD in a RAID 0 for OS X and applications with some large SATA drives for storage
-4x 300GB VelociRaptor 10k RPM SATA HDD in a RAID 0
-2x 147GB SAS 15k RPM HDD in RAID 0 with some large SATA drives for storage
I am particularly in the dark about the controllers I'd use for each solution. Clearly, I would absolutely require a PCIe card for the SAS drives, but would there be a marked advantage to using a hardware RAID card for the SATA drives over the software RAID in OS X? Also, how easy is it to get the mac pro to boot off drives connected to a controller card rather than the standard setup? And lastly, if there is good reason to use a card, are there any in particular that you would recommend?
Thanks a lot!

2. No. Do not make two partitions unless you do not plan to use Boot Camp Assistant to install Windows on that partition. If you plan to create a Boot Camp partition then you must partition the drive as one Mac OS X volume. Boot Camp Assistant will then create the Windows volume.
3. This drive must be repartitioned and reformatted as follows:
Extended Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Set the number of partitions from the drop down menu to two. Use the graphic resizer to set the desired sizes for each volume as you want. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the first volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. Select the second volume you created and repeat Steps 4-6.
4. Now here I don't know what you think is your best option. You can buy any two hard drives you want. The ones I identified were only an example of what you could purchase for under $300. There are others, slightly more expensive, that would work, and you would still be under your $300 budget. The Samsung drives are good drives and reasonably priced, but they are just one of several alternatives. You should do some checking on your own before making your decision. I'm just giving some guidance, not trying to tell you what you should do. I've provided three sites where you can read reviews and benchmarks before you decide. You need to "own" your decision.
As for how you configure these two drives that's a secondary issue. I would recommend using them for backup. Two possible arrangements are a Mirrored or a Striped RAID array. A mirrored RAID array would create one volume that has a 1 TB capacity. Everything saved to that volume is essentially saved twice - once on one drive then a copy is mirrored to the other drive. This is not what you described in your Item 4. That's not how it works. Anything saved to the mirrored RAID array is saved the way I described it just above. It makes no difference where the files come from.
Now you can use the mirrored RAID array as a Time Machine backup drive if you want, but then you should not use it for other data storage. You would need the entire capacity as backup for both of the 500 GB drives you currently have. A mirrored RAID provides some data redundancy by having a copy of everything one each drive. Thus, if one drive fails the other drive still functions and your data backup is intact. Mirrored RAIDs are generally no faster than an individual drive that makes up the array.
The second suggestion was to make a Striped RAID array. This type of array produces one volume that is twice the size of the the two drives that make up the array. Thus, you would have a single volume that is 2 TBs in size. You can use this volume for your Time Machine backups also. Striped RAIDs do not provide any data redundancy. If one drive fails all the data stored on the RAID will be lost. However, Striped RAIDs are nearly twice as fast as either drive that makes up the array. This would give you very fast storage and backup.
You could also just leave the two drives to operate independently. Use on for Time Machine backups, use the other for more storage space.
Other possibilities abound. It's pretty much up to you to decide what will fit best into your needs today and in the future. Don't feel obliged to do what one person tells you. Five different users on the Discussions will give five different opinions.
I suggest you educate yourself a bit on backup and restore by reading the FAQ about backup and restore at The XLab FAQs.
Following is more information on RAIDs:
RAID Basics
For basic definitions and discussion of what a RAID is and the different types of RAIDs see RAIDs. Additional discussions plus advantages and disadvantages of RAIDs and different RAID arrays see:
RAID Tutorial;
RAID Array and Server: Hardware and Service Comparison>.
Hardware or Software RAID?
RAID Hardware Vs RAID Software - What is your best option?
RAID is a method of combining multiple disk drives into a single entity in order to improve the overall performance and reliability of your system. The different options for combining the disks are referred to as RAID levels. There are several different levels of RAID available depending on the needs of your system. One of the options available to you is whether you should use a Hardware RAID solution or a Software RAID solution.
RAID Hardware is always a disk controller to which you can cable up the disk drives. RAID Software is a set of kernel modules coupled together with management utilities that implement RAID in Software and require no additional hardware.
Pros and cons
Software RAID is more flexible than Hardware RAID. Software RAID is also considerably less expensive. On the other hand, a Software RAID system requires more CPU cycles and power to run well than a comparable Hardware RAID System. Also, because Software RAID operates on a partition by partition basis where a number of individual disk partitions are grouped together as opposed to Hardware RAID systems which generally group together entire disk drives, Software RAID tends be slightly more complicated to run. This is because it has more available configurations and options. An added benefit to the slightly more expensive Hardware RAID solution is that many Hardware RAID systems incorporate features that are specialized for optimizing the performance of your system.
For more detailed information on the differences between Software RAID and Hardware RAID you may want to read: Hardware RAID vs. Software RAID: Which Implementation is Best for my Application?
OS X has software for creating RAIDs by using Disk Utility. Open Disk Utility and select DU Help from the Help menu. Search for "raid" without quotes. You will find information on how to set up mirrored and striped RAIDs using Disk Utility.

Which is the optimal hard drive configuration for Logic Pro ?

hello people
i would like to ask your advices about possible hard drive configurations for Logic Pro
I have a Mac Pro and thinking to buy 4 x 500GB drives .
there are several combinations in my mind to configure , but first of all i would like to ask which is the best for an optimal system for Logic Pro
model 1 :
1 stripe Raid 0 array drive for ''System'' (500+500 = 1000)
1 stripe Raid 0 array drive for ''recording + sound banks'' (500 + 500 = 1000)
which means to using 4 hard drives as 2 drives
model 2 :
1 stripe Raid 0 array drive for ''System'' (500+500 = 1000)
1 Single drive for Sound banks (500)
1 Single drive for Recording (500)
which means to using 4 hard drives as 3 drives
Or , it is more healthy to use the drives as single , without raid , stripe sets but with its own capacity instead of combining .
and also if someone has an idea regarding to compare of Seagate and Westerndigital drives (which is the best for audio recording) , would be really helpfull
I am kinda rookie for these subjects :/
thanks in advance

heelo blayzay
thanks for the reply and assistance.
1) how can i create a back up set for the 4th HD to be make back up of the 2nd and 3rd HD
2) what about to make 1st HD for system and 2nd3rd4th (1.5TB) for audio recording, and an external drive for backups ?
For the back ups , is there a special process for the backing up HD (internal or external) ? Or should i just need a Clone software to make the back up
thank you again.

Can I set up multiple usb hard drives- one for time machine and a second for media? Can one also print wirelessly with an old HP C6280 printer?

Can I set up multiple usb hard drives- one for time machine and a second for media?
Can one also print wirelessly with an old HP C6280 printer?

Can I set up multiple usb hard drives- one for time machine and a second for media?
Yes.
Can one also print wirelessly with an old HP C6280 printer?
Possibly by using an Airport Express, but depends on what type of port connection the printer requires.

External hard drive used for Time machine is full and having a hard time backing up. what should I do?

External hard drive used for Time Machine is full and having a hrad time backing up. What is my best option moving forward? NAS?

For All things Time Machine see Pondini's Excellent Infirmation here...
http://pondini.org/OSX/Home.html
Start with FAQs and Troubleshooting.

Apple TV & Time Capsule's Hard Drive Used for iTunes Media Only !

I would like to use the Time Capsule Hard Drive just for my iTunes. Not Time Machine. Time Capsule will be my Wireless Base Station (router) as well. But I'm going to plug my Mac Mini into the Time Capsule via Gigabit Ethernet. Will this work & how well (fast) will it stream the media from my iTunes to the Apple TV? I'm not synching any files on the Apple TV's Hard Drive. All Video & Music will be streaming! I know this is not what Time Capsule was intended for, but will it work & again, how well will it stream ? Is there a downside to setting it up this way ? Also, I'm not buying any Movies from the iTunes store. Thanks in advance!

OK, so having my Mac & TC hardwired by Ethernet, is like having the Hard Drive inside the TC hard wired to my Mac? Correct ? I'm sorry to repeat myself but I'm just trying to understand all this. I'm bad with Networking! So you think I should be streaming OK even with watching a movie I have in iTunes (which lives on the TC Internal Hard Drive) on my Apple TV? My Apple TV will be used Wirelessly. No Ethernet to Apple TV. Again, I appreciate the help. I don't want to buy it & find I can't do what I want. B&H in NY have the older TC 500 GB Model for $199.95 And I have a crappy router currently. So I figure I can kill 2 birds with one stone.( I love Birds. It's just an expression! If it works, it would be ideal for my situation.

Trying to copy ANY file from my MacBook Pro to an external hard drive spins for 45 minutes then fails. I hate this computer and WISH I never would have wasted my money. Any ideas? WD My Passport 2TB Drive, had to buy a program to make the POS write

Trying to copy ANY file from my MacBook Pro to an external hard drive spins for 45 minutes then fails. I hate this computer and WISH I never would have wasted my money. Any ideas? WD My Passport 2TB Drive, had to buy a program to make the POS read files. Copies that would take seconds from a Windows based machine never complete. I have to close the transfer or shut off the machine half the time. Worst computer I have EVER owned, crashes non-stop, constantly freezes, and seems like EVERY operation is more complicated with this thing. Literally, my 1997 Compaq was FAR MORE reliable and user friendly.

This is one of the messages I keep getting; The Finder can’t complete the operation because some data in -- File Whatever -- can’t be read or written.(Error code -36)
I have copied things to the hard drive in the past, but it has always been incredibly slow, and now just seems to freeze and fail

Hi, Can anyone recommended software to import dvd to iMovies. I need to import about a dozen homemade DVD's and edit them into a single DVD comprising the 'best bits'. How best can I do this. I have an external hard drive available for the job

Hi, Can anyone recommended software to import dvd to iMovies. I need to import about a dozen homemade DVD's and edit them into a single DVD comprising the 'best bits'. How best can I do this. I have an external hard drive available for the job

You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
which is free, but you must also have the Apple mpeg2 plugin :
http://store.apple.com/us/product/D2187Z/A/quicktime-mpeg-2-playback-component-f or-mac-os-x
(unless you are running Lion in which case see below))
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
For the benefit of others who may read this thread:
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
And from the TOU of these forums:
Keep within the Law
No material may be submitted that is intended to promote or commit an illegal act.
Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
If you are running Lion or later:
From the MPEG Streamclip homepage
The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion onwards, however MPEG Streamclip still needs it. See this:
http://support.apple.com/kb/HT3381
To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. (The same applies to Mountain Lion even though that has it preinstalled.) You don't have to install QuickTime 7.

I would like to replace the hard drive cable for a 13" mid 2010 macbook pro. What is the right model of the hard drive cable?

i would like to replace the hard drive cable for a 13" mid 2010 macbook pro. What is the right model of the hard drive cable?

https://www.ifixit.com/Store/Parts/MacBook-Pro-13-Inch-Unibody-Model-A1278-Mid-2 009-Mid-2010-Hard-Drive-Cable/IF163-013-1
Apple Part #: 922-9062, 821-0814-A

Maximum hard drive size for 350 MHz slot loading?

Hello,
What is the maximum hard drive size for a 350 MHz slot loading imac?
I am aware of a 128 GB limit on imacs. Does the 128 GB hard drive limit apply to all imac CRTs or just the earlier models?
Here are the specs of my imac:
Blueberry 350 MHz
Slot loading CD-ROM drive,
6 GB hard drive
Is the maximum hard drive size limit of 127GB apply to this particular model?
Thanks

Yes, the last CRT iMac was in 2001. The first machines with built-in greater than 127 GB support were released in June 2002, as this article explains:
http://docs.info.apple.com/article.html?artnum=86178
So all CRT iMacs have that limiation.
http://support.apple.com/specs/imac/
The 8 GB limit is explained here:
http://docs.info.apple.com/article.html?artnum=106235

Need help finding correct external hard drive enclosure for a T61 hard drive

Hi, recently my lenovo T61's video card fizzled out right after the warranty expired. I have information on the laptop's hard drive that i need to get off of it. I have a hard drive enclosure for my old hp laptop's hard drive but the two drive have different connectors. I was hoping someone could point me in the right direction to find a lenovo T61 hard drive compatible external hard drive enclosure.
The hard drive is a 100 GB 7200 RPM drive
Model: HTS722010K9SA00
HDD: 7K200-100
LENOVO P/N: 42T1056
HITACHI P/N: 0A53257
MLC: DA2141

what model is your HP laptop? also how old is it?
Prior to SATA connector there is the PATA connector.
http://archmemory.mobi/index.asp?PageAction=Custom&ID=106&imz_s=4c80f54d8ae8704709fec3ff867052fe
have a look at this.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Hard drive backup for sending powerbook in for repair

Similar Messages

Maybe you are looking for