Hard drive buzzes when tilted
I've had my 12" Powerbook for over a year, and just today I noticed a buzz when I tilt my computer from side to side, for example when I pick it up from the table. The buzzing immediately goes away when its not being moved. My Hard drives SMART status still says verified, so I'm not sure what the problem is... I would like to know if anyone knows what the problem is, if I'm going to need to replace the dive... et cetera... Also the sound is coming from the corner with the hard drive, but my not be the hard drive making the noise.
Thanks in advance!
here's two articles on replacing the HD in a 12" PowerBook:
http://www.xlr8yourmac.com/systems/powerbookG412in_HD_upgrade/PowebookG4_12in_HDupgrade.htm
http://www.pbfixit.com/Guide/53.11.0.html
It doesn't look that difficult, but I'd say you'd want to be comfortable enough with the thought of messing around inside computers or electronics. There's a load of screws to remove (about 30), so be careful to label them all so you know where to put them back.
My HD recently started the buzzing when tilted, so I'm expecting bad things to happen soon (I'm backing up every day). Hopefully I'll get a couple of months before I get to see first hand how difficult the replacement procedure is.
Similar Messages
-
How do I save and import my bookmarks from another hard drive? When I try to open the installed Firefox on the old drive, it (obviously) opens a browser from the new main drive, free of bookmarks. Is there a way I can save the bookmarks on the old drive without opening a browser?
The guts of my computer were rearranged and I got a new main hard drive. My old one is still in there and I can get stuff from it, but when I go to the Mozilla folder on the old one, I can't figure out if there's anything I can do to get all my bookmarks from that drive to my new one, where Firefox is newly installed.If you open Firefox then Firefox will always use the default profile folder as found via profiles.ini on your system drive.
You either need to import the file in your current default profile or copy the file to your current profile folder while Firefox is closed.
Firefox 3 stores the bookmarks and the browser history in [http://kb.mozillazine.org/places.sqlite places.sqlite] and no longer creates an HTML backup by default.
There are also (five) JSON backups in the bookmarkbackups folder within the Firefox profile folder.
You can either copy the file places.sqlite to your [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] or import the most recent JSON backup from the bookmarkbackups folder of that old profile.
See:
http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox
http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
See http://kb.mozillazine.org/Profile_folder_-_Firefox
"Application Data" in XP/Win2K and "AppData" in Vista/Windows 7 are hidden folders.
See http://kb.mozillazine.org/Show_hidden_files_and_folders
Go to: Control Panel > Folder Options > "View" tab > under "Hidden files and folders", select "Show hidden files and folders".
You may want to un-check the box "Hide extensions for known file types" to see the file extensions of all files. -
I am trying to restore my old Macbook Pro data using Time Machine to a new Macbook Air from an external hard drive, but when I restore I get two diferrent loggin accounts and I only wnat one loggin account to access all my data/files?
This web site might answer all of your Time machine questions:
http://pondini.org/OSX/Home.html
Ciao. -
When looking at my "About This Mac" it says that I have 60gb of space left on my hard drive, but when I go into finder to find all of these files there is not 300gb worth in anything I search, even searching, "All files on the Mac". Help!?
It says I have over 150 gigs of video on my hard drive. But I have gone through and deleted almost all of what shows up, still it says there is roughly the same amount on the hard drive. Where are these files? I want to delete them so I can have my hard drive clear.
Thanks for your help guys!Quote from the article.
Time Machine in OS X Lion includes a new feature called "local snapshots" that keeps copies of files you create, modify or delete on your internal disk. Local snapshots compliment regular Time Machine backups (that are stored on your external disk or Time Capsule) giving you a "safety net" for times when you might be away from your external backup disk or Time Capsule and accidentally delete a file.
So what makes a notebook any different then a desktop, other then with a desktop you might have your tm backup drive connected all the time.
The object here is to not indiscriminately delete files you need or want to keep. I personally have never deleted a file I wanted to keep.
In essence a backup is for catastrophic failure of your system. So it can be restored once that failure has been fixed. Not because you go in willy nilly and start deleting files. -
I am trying to edit my website which, was composed on iweb about 2 years ago. I have the website stored on my hard drive. When I open iweb, I can't figure out how to load the website into iweb for editing purposes. Any help would be greatly appreciated! Thanks
You need to migrate to a modern, supported webpage development application and leave iWeb behind. It hasn't been supported for 2 years now and was behind the curve feature wise when it was dropped by Apple.
One app that many have migrated to because it is very similar to iWeb in the GUI and features is Everweb. It has a demo version that you can try. Text and photos from you current published site can be copied and pasted into Everweb to help the migration over.
There are other possible candidates. Just search the iWeb forum for "iWeb alternative" or "iWeb replacement" to get a list of topics discussing them. -
I'm a new Mac user. I imported photos from my PC through a jump drive and they ended up in my iphoto library on the hard drive but when I open iphoto from the dock its empty. How do I import those photos to the dock file from the iphoto library?
Paragon Software has the most reliable NTFS driver for Mac
tips on importing and organizing, transferring from Windows etc
http://www.apple.com/support/itunes
http://www.ilounge.com -
my hard drive crashed on my MacBook Pro crashed and I need to get my CS5 up and running on the new hard drive. I copied what I could onto an external hard drive but when I drag and drop I get directions to uninstall but the uninstall folder I have does says it is an alias that is no longer present. I get error 6. I would like to get my software up and running on the laptop again please
If you subscribed to iTunes match the songs are kept in icloud. If you didn't but you did save the actual iTunes library folder which should include the music, video, etc. you should be able to just drag this file back to your machine in the same place and when you open iTunes it will give you a chance to identify the iTunes library folder.
You can test this to find out if you saved the media files or not and don't need to attach your nano to do it.
You are correct that once you connect the nano it will clear the existing files from it and sync it with the new iTunes library.
If you don't have the media files i'm not sure if/how to get them back on a windows ipod. I have everything backed up regularly because of the horror stories I have seen & heard. -
My Dell laptop hard drive crashed - when I go to sync my iPhone it says that my phone is already synced with another computer and can only be synced with one computer at a time. When I hit sync is says it will erase my phone and sync with the new computer which is blank. How do I get my phone to sync my contacts, pics, apps etc. over to my new hard drive without losing anything.
Yes, so what's confusing... Did you not restore the backup of your data, contacts, pics, apps, music, etc. to the new hard drive after you replaced it or reformatted it or whatever you did? If so, then you can just sync your data back.
If not, please try searching the forum. This has been addressed hundreds of times here. -
A library on my hard drive became corrupted, so I over-wrote it from an external hard drive. When I now access the library on my hard drive, many of the images are vertical, and cannot be rotated other than one at a time. Ideas to correct this?
You had already done "Repair" and "Rebuild"? These usually takes scores of minutes or hours.
Does the Library on your external drive work from the external drive? Navigate to it in Finder and double-click the name.
If it does, delete the problem Library, empty the System Trash, reboot, Verify your system disk using Disk Utility (and might as well repair permissions while you're at it), reboot, test the external drive Library once more to confirm it works properly, then close it and copy the Library to your system drive. When the copying is done, double-click the Library (now on the system drive) and see what you get. -
I recently restored my laptop with Windows 7 and imported my iTunes library from my external hard drive. When I try to play songs, it says it cannot and that the original file could not be located. How do I fix this?
Put the files back where iTunes expects them to be.
-
Hi, I have a hard disk failure so to recover my data I am using disk utility to restore the data on an external drive while booting from a second external hard drive. When I perform the operation and after having selected both my destination and source drives, the operation begins but soon fails due to input/output error. If I try to create an image of the drive it gives me the same error message. Any help would be much appreciated.
Disk Utility only creates a image of the drive, so it's no help getting exactly what you want, which is your files. If the file structure is messed up or the drive is failing then it's no help.
If you have a external boot drive and you can't access the internal non-booting drive though the typical Finder and windows to transfer your files via drag and drop methods, then you need to install Data Rescue on the external boot drive and it will do as best as it can to recover your files. (works on non-encrypted/non-Filevaulted drives only)
.Create a data recovery/undelete external boot drive
Are you sure you have hard drive failure, or that OS X isn't merely not booting?
Because if the drive is working physically, then there is a host of fixes
..Step by Step to fix your Mac
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/ -
i tried transferring my iphoto library from my old macbook onto my new macbook pro (via external hard drive), but when i open the new iphoto, it seems to have transferred ALL images ever used on my old macbook. so i tried to just delete all those images so i could try a different approach to transferring, but the new iphoto won't let me do anything and every time i try to delete anything it crashes (since the image amount is so high). please help!!
MacBook Pro, OS X Mountain Lion (10.8.2), iphoto '11, version 9.4.2To move an iPhoto Library to a new machine:
Link the two Macs together: there are several ways to do this: Wireless Network,Firewire Target Disk Mode, Ethernet, or even just copy the Library to an external HD and then on to the new machine...
But however you do choose to link the two machines...
Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
Then launch iPhoto. That's it.
This moves photos, events, albums, books, keywords, slideshows and everything else. -
Had to reinstall Lion. Backed up my music to an external hard drive. When I plug in my iPod a prompt msg says it's synced w/another iTunes library and asks if I want to "erase and sync" (to what is now an empty library) or "Transfer purchases". Do i "erase and sync" and re-add music from the hard drive once that's done?
You just need to tell iTunes where the library is located. If you want it back on your internal drive, copy the entite iTunes folder. Follow the instructions below.
iTunes: How to move your music to a new computer (Mac or Windows):
http://support.apple.com/kb/HT4527 -
I have replaced my ibook hard drive but when I start up I get a folder with a flashing question mark. I have tried installing the OSX disk using the "C" key but can't get any further than the flashing "?." What do I do? What is the problem?
Which iBook do you have?
http://support.apple.com/kb/HT1772?viewlocale=en_US
Which version of the OS is installed, and which version are you trying to install?
You could try starting up with Startup Manager and see if it will allow you to select the OS X install disc as the startup disk. If so, maybe you can proceed from there. I would recommend repairing the hard drive first since you are evidently having a bit of a problem with it. -
I have been transfering photos and movies to an external hard drive and when I try and secure trash contents off my computor i get the message it will not continue In utilities the message is: SUID file syst/library/coreS has been modified and will not be repaired. Hence I cannot free up space on my computor. What can i do?
Do not worry. It is probably a permission you should ignore, but you should check that the permission appears in this site > http://support.apple.com/kb/TS1448?viewlocale=en_US&locale=en_US
Maybe you are looking for
-
Multiple transactions control in the same page
I am using the Jdev11g 11.1.1.4 and ADF BC, I am quite new for Jdev11g, My question is I have a page, there are a af: form region and two af:table regions inside the same page. the 'master' is in af:form and two its 'details' are in either af:table.
-
How do I put a capital letter in the middle of a word using Pages on an iPad?
I have a English last name that has "Mc" as the first two letters, Traditionally, the third letter is capitalised. This 4th gen iPad running Pages 1.71 won't let me do it. i've tried puting it in as a shortcut - but to no avail. Any suggestions?
-
In-process Inspection in Process Industry
Hi all, I am working on 6.0. Scenario: there are 10 reactors in line for a process, once I raised the order of a matrial, at the first reactor I add all the ROH and HALB required for that FERT, now the mixture is transfered to Reactor no. 2 but befor
-
Making Contact Form Work?
Greetings, I have set up a contact form on one of my web pages that consists of Name, Email and Comments with a Submit button. I am wondering how I can get it to actually work! I've done some online research but have come up empty handed. Any help on
-
Aeroflex 2975 driver for LabVIEW 8.0
Is there a way to convert the Aeroflex IFR 2975 driver for LabVIEW CVI for use in LabVIEW 8.0? OR, is there a driver already developed for this?