Hard drive cameras compatible with final cut express

What hard drive cameras are compatible with FCE,
I purchased an imac and much to my dismay my Sony dcr-sr200 doesn't work with it..
Thanks
John

What format do you want to work in SD or HD? You should really ask questions about camera purchases on the video production forum. There are many factors involved here, only one of which is its compatibility with FCE.

Similar Messages

Hard drive cameras compatible with FCE 4?

I am comparing cameras for purchase for our video broadcast program. I like the idea of the hard-drive camera so we eliminate tape and all its aggravations.
However, I notice the hard drive cameras interface with USB. Can FCE import these files?
Thank you.
Chris Schwalm
Message was edited by: scwalminator

Hi Chris
What tape brand are you using... to have bleed-through sounds like very poor quality tapestock.
I have never had a problem as you mention in the 8 years I have been using mini-dv tapes in dvcpro vt players, the only problem I have had is with JVC cassettes, snapping and needing to be spliced, here in South Africa we tend to use SONY/PANASONIC tapestock.
Really if you go back in the forum you will find a huge discussion about the pros/cons of hard-drive camera's vs minidv camera's.
With mini-dv you do not need the camera to edit from, in the case of hard-drive camera's the camera is out of duty for the length of the edit, with mini-dv the footage is separate from the camera.
If it was me, I would either argue for a bigger budget based on a number of factors. Final Cut Express is capable of dealing with AVCHD footage after it has been converted, if you do not like this then Final Cut Studio 2 which would cost the same as a Sony HVR A1.
Tape stock is much cheaper than camera's or P2 memory cards.
Something we use here is the FIRESTORE external hard drive that is attached to the camera and records footage at the same time as the camera records to tape. Very handy!!!!
That would solve the problem, you have instant access to the footage and an archive tape.
Justin... Durban... South Africa

What's a camcorder that's compatible with Final Cut Express

I just got final cut express and I am looking for a camcorder from $200 to $400 that's compatible with it. I don't know much about camcorders, and some simple straightforward suggestions would be much appreciated Thanks!

Would you like to use tape or a tapeless storage variety?
Tape cameras are miniDV or HDV, both work fine with FCE. HDV may well be out of the price range.
A base model AVCHD camera (tapeless) will also be fine.
Note: Standard AVCHD is OK but many cameras use variants like AVCHD Lite. Read the fine print.
Al

Can somebody tell me if this video camera works with Final Cut Express HD?

Hi,
I'm juggling with the idea of changing my old video camera from 1999 Sony TRV-93.
I'm looking in to the Panasonic HDC-SD5 or Sony HDR-HC7.
My main concern it that I will be using Final Cut Express or iMovie for the editing of my home movies.
But neither of the companies is clear if their product will work with a Mac.
I'll be using a MacBook Pro to run Final Cut Express HD.
So if someone that uses one of this video cameras tell me that they work with Macs and Leopard, It will be much easier to take my decision.
Thank you for reading and your anwsers.
Mario

Probably ANY camera that uses MiniDV TAPE and has a FireWire ( aka iLink) output can use iMovie and FCE .
DVD, Hard Disk and Flash Memory cameras are generally unsuitable.
However, iMovie 07 (aka 08) and FCE 4 can handle AVCHD cameras.
Ian.
SORRY ! Just realised you wanted someone who has one of those cameras. I don't think many people will because flash memory is not really suitable at present because of the incredibly high price of the SD cards. eg.probably £60 for an hour of video as compared with £2 for a tape.
Message was edited by: Ian R. Brown

Soundtrack Pro compatible with Final Cut Express?

I have Final Cut Express 4 installed and installed Logic Studio. Soundtrack Pro and Compressor did not install. Are these programs not compatible with FC Express?

From the Apogee website:
"Duet features two superb microphone inputs, each with phantom power and up to 75dB of gain. With Duet, you can record a pristine vocal track while playing your guitar or keyboard, stereo mic your acoustic or even capture a live concert."
http://www.apogeedigital.com/products/duet.php
It's ideal target audience would be laptop users in need of a high-quality, but very portable audio interface for Logic.
Message was edited by: lwilliam

Best speed External Hard Drive to use with Final Cut Pro X ?

Hey all
I'm looking at getting a new USB 2.0 external hard drive to use with FCPX, I was wondering what everyones thoughts were on minimum speeds and what everyone else uses.
I am looking at least 1-2TB.

I will warn you now that I am somewhat of a lone voice on these forums for recommending USB 2.0s.
I have used the 7,200rpm types with their own mains supply over the last 6 years (and exclusively for the last 3) and had no problems of any kind.
Having said that I am not a pro with tight schedules (or underwear!) but I have used DV, HDV, AVCHD with and without ProRes and AIC.
Most of my projects are short though I have done a number of 2 hour projects with comparatively simple editing and a few effects etc. One ongoing project has some 12 hours of DV which I dip into occasionally.
I have a couple of LaCie FW HDs which I stopped using a couple of years ago in favour of the much cheaper USB 2.0s and didn't notice any difference, though as I said I don't have pro time constraints.
Now is not the best time to buy HDs cheaply as the autumn floods in Asia knocked out many of the main suppliers, prices doubled overnight and have still not got back to last summers figures (2TB WD Essential £69 with free delivery).
Look at the price now!
http://www.amazon.co.uk/Western-Digital-Elements-External-Desktop/dp/B003IPC21Y/ ref=sr_1_11?ie=UTF8&qid=1330504588&sr=8-11

What video cameras are compatible with Final Cut Express?

I live in Japan and was thinking of buying a Victor " Full High Definition" video camera (1920x1080). The only thing I was warned about by the salesperson is that unless I have a Blue-Ray DVD recorder/player, I will never be able to enjoy true Full HD after burning my video to a DVD. I guess regular DVD recorders/players can't support it yet.
I have searched to find a page that tells me what video camera is compatible with my iMac G5, but no luck. Any ideas on how to find out before buying a video camera? I would appreciate anyone's advice.
Thanks, Larry in Japan
iMac G5 Mac OS X (10.4.9)

...snip...
You want to stay away from recordable-DVD and hard-disk camcorders,
...snip...
Hope you don't mind me asking why? - As long as they've got a F/W connector how does the source media make any difference? - In fact, I would think that shuttling around would be faster with HD's or DVD's.....
I also believe the salesperson was trying to say that he's going to need a BluRay deck in order to be able to view his HD material on an appropriately equipped TV - Which is correct, no?
Thanks in advance for any comments,
Cheers,
Ian
MBP 2.16G / 2GB FCE 3.5 Mac OS X (10.4.9) etc etc

Is the Sony HDR-FX7 HDV Camera compatible with Final Cut Pro 5 or 6?

Has anyone gotten this to work correctly. I have read in a few forums that the camera is not supported by FCP and I checked on the compatibility list and it is not there. iMovie sees this camera and can capture from it.
I can not get FCP 6 to recognize the camera. I set device control to Sony HDV and I am only able to capture using the Intermediate Codec. When I switch to the HDV codec it only will record for a second then fail. Although I can capture with some limitations I still can't get FCP to recognize the camera and therefore video from the timeline won't playback on the camera.
I really don't want to have to buy a hdmi capture card or buy a HDV deck to get this to work. If anyone knows any workarounds it would be greatly appreciated.
If there are none any suggestions on a cheap compatible hdv deck or camera to get footage in and out would be great.
Thanks.

I have never had a problem with my internal boot drive either capturing DV footage and since HDV shares the same data rate I didn't think it would be an issue.
Then you are lucky my friend. If you wish to keep tempting fate that is your choice. I am simply suggesting that you follow the suggested setup so that you could eliminate a possible problem.
I do think there are compatibility issues.
This may be the case. Have you used an easy setup that matches your cameras settings and then changed control to firewire basic as I suggested earlier?
I have manually set up the capture settings and it will only work to the intermediate codec.
Manually settings are not always the best method. Try an easy setup as I suggested earlier.
I have narrowed it down to 2 things, either it's a Final Cut 6 issue on an Intel Mac, or it's just not compatible (Apple does not list it in it's Compatible Hardware List).
What I am trying to do is to narrow it down further. I have given you suggestions but it does not appear that you have tried them. If you try these we can continue to eliminate until you have an answer.
Please post back when you have tried my previous suggestions.
K

Using Vado HD with Final Cut Express

I am aware that the VADO HD is not compatible with iMovie, but is it compatible with Final Cut Express? If so, during setup of FCE what option should I use for setup? HD, NTSC, PAL, Apple Intermediate Codec, or DV/Panasonic and then under "use" which option should I use?
thanks for ALL of the help!
tom

crap.
Ok, maybe you can answer a follow up question. So, I'm new at this.... but I understand that I will have to convert the video then. In that case, is there an optimal video conversion type that I should use so that I lose the least quality? I am using MPEG Streamclip as my conversion tool.

I have a Benq M22 HD cam. Is it compatible with Final Cut pro 7?

I have a Benq M22 HD cam. Is it compatible with Final Cut pro 7?

Hi Nick, thanks for your help, Im rather new at editing and FCP. I did everything as it said to do in the MPEG Streamclip download tutorial, but when it finished, I tried to open the .mov files and it was just sound but no picture, just black.
Now, another thing, the .mov converted files where saved into mi SD card after the program was done (is that ok, or should they have been saved somewhere else too?) then i tried to put them into my FCP by using the Log and Transfer and when I selected that it gave me this message: "100MEDIA" contains unsupported media or has an invalid directory structure. Please choose a folder whose directory structure matches supported media.
Help please!! I know that these problems are probably from my lack of knowledge on the program and the whole thing.. but im working on it!!
Thanks!!

Does the DCR-SR62 30GB Sony Handycam work with Final Cut Express hd 3.5?

Hi,
I am a new mac user and I want to get a good camera that will work with Final Cut Express hd, I am currently looking at the DCR-SR62 30GB and the HDR-UX1 dvd both by sony and I would like to know if these to cameras or one of them will work with Final Cut Express Hd. Thanks.

Niether one of these cams are the best choice for FCE. FC can not directly work with either DVD or HD (as in Hard drive) camcorders. You will have to convert and/or rip the output of either camera, giving you an extra work step and perhaps diminishing the quality of your footage
FCE is designed to work with DV/HDV material ... from a tape, throught a Firewire connection
There is software like MPEG Streamclip which will allow you to convert those cam's output to work with FC but if you haven't bought them yet, I would hold off and look at a good quality tape based cam

Does anyone have experience with using a Canon Vixia HF M52 Camcorder with Final Cut Express?

I'm looking to purchase a new camcorder that is compatible with my Mac OS X (10.6.8) that will work well with Final Cut Express 4.0.1 I have downloaded the camcorder support info from Final Cut Express that list many capital camcorders. I've used Sony tape based camcorders in the past. I'm looking for High Definition. I can stick with a tape based camcorder, but thought I would look at the Canon Vixia HF M52 as an alternative, which is listed as compatible. I would like to download directly from the camera to FCE. I film in the wilderness, like having an optical zoom of 20 or greater (yes, I use a small tripod). Does anyone have experience with the Canon Vixia? And if not, but you really like another camcorder that you can recommend, what is it?

The Vixia HF M52 is an AVCHD camcorder and should work perfectly fine with Final Cut Express 4 (4.0.1).
The published "camcorder support list" has never been up to date and I would not take it to be a definitive list of compatible camcorders.
One note, however, the Vixia HF M52 supports a number of different shooting modes. I suggest sticking with the AVCHD 1920 x 1080i / 60 fps mode for use with FCE. FCE does not support progressive modes except in 720p25/30 (which the M52 does not seem to shoot anyway); nor does FCE support any 24 fps modes.

Is the Canon Legria HF M56 compatible with Final Cut Pro X

I am new to Mac and new to Final Cut Pro X. I am looking to buy a new HD Video Camcorder to use with my new computer/software and wondered whether or not the Canon Legria HF M56 is compatible with Final Cut Pro X.
If it is, do you have to import the footage directly from the Camcorder, or can you first save the files to the Mac and import them that way?
I currently use a Sony HandyCam HDR-SR10 which produces AVCHD .mts files. I have these saved on my Mac after transferring them over from my PC but Final Cut Pro X cannot import them. Very frustrating for a professional app to be unable to import these files. Even Cyberlink Power Director can use these files.
Thanks for your help
ConvertedAppleFan

It's not on the tested list but it may well work.
http://help.apple.com/finalcutpro/cameras/en/index.html
Why don't you download the trial and try it?

Issues Capturing with Final Cut Express

Hi
I am currently having issues capturing with Final Cut Express. I am using a Firewire 800 gold speed cable 9pin/4pin with my Sony LSF-S58 camera. I use mini DV tapes and usually capture on other computers with no problems. However this time I am using Final Cut Express version 4.0.1 along with a Thunderbolt to Firewire adapter so it'll connect with my MAC Book Pro (Operating system OS X 10.6.8). The issue is when I open Final Cut's capture option there is a message at the bottom that says "No Communicatin" I have tried various settings within easy set-up and nothing seems to work as well as browsing this help board along with others looking for the answer. Any help anyone can provide would be great. Thanks.

When I Google LSF-S58, I get a Sony Lens Hood, not a camera. Are you recording in HD or SD?
Have you used the Thunderbolt to Firewire convertor successfully on your computer with other devices?
Have you used the Thunderbolt port successfully with other Thunderbolt devices?
I don't know if this is applicable to your computer, but there is a Thunderbolt software update for 10.6.8 here:
http://support.apple.com/kb/DL1452?viewlocale=en_US&locale=en_US
MtD

Is a Canon Vixia HF R30 compatible with Final Cut X?

Is a Canon Vixia HF R30 compatible with Final Cut Pro X?

It's not on the tested list but it may well work.
http://help.apple.com/finalcutpro/cameras/en/index.html
Why don't you download the trial and try it?

Hard drive cameras compatible with final cut express

Similar Messages

Maybe you are looking for