Hard drive causing lockups?

Ever since the new drivers, my computer locks up and I can't figure out why.  I noticed that the HDD activity LDD goes solid when it is locked up.  It will freeze for a few seconds, respond, then a hard lock up which I have to reset the comp.
Any ideas?
Running on Win2k apic off

Pyr0,
Could be a Driver issue.
Richard

Similar Messages

  • External hard drive causing finder to crash

    The problem in a nutshell:
    On 2 different occasions today, trying to open the hard drive folder (after not accessing the EHD for a couple hours) caused Finder to crash and my Macbook hung on shutdown - I had to unplug the USB hub or do a forced manual shutdown. When restarting the computer, my computer couldn't read the hard drive - I did find a way to fix that (see details below).
    I don't know why this is happening in the first place or whether this indicates a bigger problem. Thus far, all data on these drives is backed up elsewhere, but I want these drives to be my backup (aside from DVD hard copies, of course). If anyone knows what may be causing this problem, I'd appreciate your help, thanks!
    My system:
    I have an early 2008 Macbook with OSX 10.6.8 and 4GB RAM.
    Last week I bought two identical Hitachi DeskPro 3TB USB hard drives -- call them External HD A & B --, connected to my Macbook via a USB hub that has its own power source. The EHDs have their own power sources as well. All power sources are plugged into surge-protected power strips. (The EHD B is a cloned copy of the EHD A using backup software).
    Each EHD is divided into 3 partitions.
    In System Preferences, I did NOT choose to have the hard drive(s) go to sleep whereever possible.
    Both EHDs run cool - I've never seen any sign of overheating.
    Details of What Happened:
    Both times, I was actively using my computer but hadn't accessed the EHD for a couple hours or so.  Both times, only EHD A was present in the Finder. (EHD B was physically plugged in, but ejected from Finder, as is my ususal practice.)
    Upon restart, I got a message that "a drive plugged into this computer cannot be read", giving me the option to Initialize, Ignore, or Eject. Restarting my Macbook (with one or both EHDs connected) didn't make a difference.
    Neither drive showed up in Disk Utility, but they both showed up in System Profiler under USB, albeit with much fewer details than when the drives are showing up normally. The scanner attached to the USB hub has worked just fine.
    Both times, the solution to the undetectable EHD problem was to plug in the drive's power source directly into the wall socket and the drive would promptly show up on my desktop. (It doesn't matter whether I plugged the USB directly into my Macbook or kept it plugged into the USB hub.) Once I do that, I can eject the drive, plug it back into the power strip, and it works just fine. I verified the drives in Disk Utility both times and they tested ok.

    I'm replying to my own post here since it's far to late to update the original message: To update: after more than 6 months, I can verify that the solution given at bottom of my original post (plugging the drive directly into a wall socket) has worked every time, both in the US and in Asia.  I have no idea why this is so, just that it works.

  • Going into my hard drive causes mac pro to lock up like fort knox

    Hi, I have been a mac user for just a hair over a year.(Apple will not help me with anything)
    All has been swell until now.
    If I go into my hard drive my computer locks right up. I can do
    nothing to move it along. The only option I have is to hold down the
    power button for six seconds, which kills me and the computer a little
    each time. I booted up the computer using the mac install disc and I
    used disk utility to "repair" the disk. It reported the disk was "OK".
    I thought swell, and went into documents on the hard disk and it
    locked my computer up again. I let it sit there for an hour and
    nothing moved. apple/option/esc does not do anything. I went into time machine and
    went to the documents there and it locked up the computer too. I went into finder and went to documents and it locked up the computer. I went into other areas of the hard drive and it locked up the computer. The funny thing is I can go on the internet, use programs, read email, and everything works fine. Can anyone guide me in
    the right direction in solving this problem I am facing?
    Specs:
    Model Name: Mac Pro
    Model Identifier: MacPro2,1
    Processor Name: Quad-Core Intel Xeon
    Processor Speed: 3 GHz
    Number Of Processors: 2
    Total Number Of Cores: 8
    L2 Cache (per processor): 8 MB
    Memory: 8 GB
    Bus Speed: 1.33 GHz
    Boot ROM Version: MP21.007F.B06
    SMC Version: 1.15f3
    troubled drive:
    ST3750640AS P:
    Capacity: 698.64 GB
    Model: ST3750640AS P
    Revision: 3.BTH
    Serial Number: 5QD1P*
    Native Command Queuing: Yes
    Queue Depth: 32
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk0
    Bay Name: "Bay 1"
    Mac OS 9 Drivers: No
    Partition Map Type: GPT (GUID Partition Table)
    S.M.A.R.T. status: Verified
    Volumes:
    Macintosh HD:
    Capacity: 698.32 GB
    Available: 328.75 GB
    Writable: Yes
    File System: Journaled HFS+
    BSD Name: disk0s2
    Mount Point: /
    second drive:
    SAMSUNG HD753LJ:
    Capacity: 698.64 GB
    Model: SAMSUNG HD753LJ
    Revision: 1AA01112
    Serial Number: S13UJ1CQ6***
    Native Command Queuing: Yes
    Queue Depth: 32
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk1
    Bay Name: "Bay 2"
    Mac OS 9 Drivers: No
    Partition Map Type: GPT (GUID Partition Table)
    S.M.A.R.T. status: Verified
    Volumes:
    Boot OSX:
    Capacity: 128 MB
    Writable: Yes
    File System: HFS+
    BSD Name: disk1s3
    Mount Point:
    <Edited by Moderator>

    Sounds like itneeds some good basic maintenance and troubleshooting. Stop using this drive. Start trashing temp files, and off loading good files.
    Everytime you freeze and do a hard restart, the chance that the journal, directory, file system and data are compromised increases, in spite of the "OKAY" from Disk Utility's repair routines it is not reliable. And leads to false sense of security. Disk Utility only checks the basic directory, not the files themselves.
    It may be something like a damaged Finder plist/preference, or worse, but either you look for an easy fix, or just start cleaning up and moving files and system to a good drive and system.
    You may have bad blocks on your drive causing all this. Or not. TechTool can detect bad sectors, but not map them out. (Deluxe is part of AppleCare; or Pro, commercial version).
    Start using SuperDuper if you don't already, and Disk Warrior, premiere for disk repairs.
    http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
    What you need to be doing is rebuild your system from the foundation up.
    You may need to check out Data Rescue II demo from Prosoft Engineering to recover files.
    I would begin by installing OS X on another drive, or restoring from TimeMachine. Create/name an "emergency" boot drive partition. Doesn't need to be that large. Keep it handy just for doing repairs and maintenance. Keep another as a clone of your working system and backup - in addition to TimeMachine.
    You may want to start by erasing the drive (not just the OS volume) with a 7-way write (not just zero all, it does NOT do a reliable safe job mapping out bad blocks) and restore from TimeMachine. Or work with a new drive.

  • I have an iMac 07 model and it has been running slow at start up.  Does a three year old hard drive cause your computer to run slow?

    I was told by a second source store today that the hard drives in an iMac 07 model run slower with time, mine is a little over three years old.  Is this an accurate statement?

    Computer slow downs can be caused by numerous things, age is not one of them. There is some really good reading here, I'm sure if you look 25 Ways to Speed Up Your Mac closely you will be able to regain some lost performance.
    BTW in your signature you list some antivirus software....that could be a cause right there as it's not needed on a Mac.
    Roger

  • External Hard Drive Causing Spinning Beach Ball - 27" iMac

    I have a brand new 27" iMac with the Core i7 processor. There are no modifications to the unit. I do however have a portable USB hard drive plugged into the unit. Now I imagine that after some time the iMac is putting the USB hard drive to sleep because of non-use. However, after I walk away from the iMac (my iMac is set to sleep after 3 hours) for 30 minutes or so and come back and start using some applications one will eventually slow down and the spinning beach ball appears. For example, when I come back to the iMac after 30 minutes and log back in and launch Mail everything is fine. Then I might launch Safari and all of a sudden the USB hard drive spins up and the spinning beach ball appears. Can someone tell me how to correct this so it does not cause these hang-ups?
    Thanks in advance,
    Mike

    Hi Mike,
    Western Digital external HDs are known for their rather 'dubious' sleep/No-sleep behaviour.
    I have two older ones myself with the same oddity.
    Have a look here http://forums.macrumors.com/showthread.php?t=300839 and maybe use the app mentioned there http://www.macupdate.com/info.php/id/31158/keep-drive-spinning
    Regards
    Stefan

  • WD Hard drive causing Kernel Panics

    I recently came home to find one of my hard drives missing from the desktop, I restarted and the drive reappeared. Ran Disk Utility on the drive and it's reported as fine, also S.M.A.R.T. says its fine. But within 2 to 6 minutes the computer will kernel panic (sometimes only getting a 3rd of the way down the screen), panic.log is never updated either so I can't post that info. I've reset PRAM to no avail. When I restart the drive sometimes doesn't appear at all or takes some time to appear.
    The only thing that stops the kernel panic is to remove the offending 500GB Western Digital sata in bay 3. I need to to get the information off of that drive but can't keep the computer on long enough before a KP happens again. Disk Warrior and Drive Genius report no errors though running a hardware test in Disk Warrior immediately freezes the machine.
    Occasionally the drive will appear and occasionally it won't show up anywhere - not even Disk Utility. I must have some sort of HD controller issue with the drive.
    Does anyone know how I could get the info from the drive - maybe put it into a USB caddy? Anyone else experienced anything like this? It certainly doesn't seem very common.

    Thanks, The hatter, I'll get a enclosure tomorrow, I need the data off the drive more than anything else. Perfectly happy to trash said WD drive afterwards, I've come close already
    I only get k/ps when drive is in bay. Drive occasionally won't show up with Disk Utility and sometimes will, which strikes me that it's a serious hardware problem. Root mode boot and safe mode change nothing - sometimes I'll get a Kernel panic while the apple logo is still showing. Take drive out and system is perfectly fine.
    Have started to get data off but get k/p after about 5 mins so will take a while. Some is backed up (it's my iTunes library but I backed it up 4 months ago), but could do with around 250Gb of raw firewire movie files dumped from (now blanked) tape that I've yet to process. The data seems fine, just something is causing the k/p. Reboot occasionally shows drive, occasionally doesn't in Disk Utility...
    Also tried MacDrive on Bootcamp partition - but XP crashes pretty quickly with a freeze. Will check out WDs Windows/Dos utitlity now you've mentioned it, it is a WD drive after all. So not much better under XP.
    Have done extensive RAM tests just to make sure it wasn't that, including reseating and PRAM and SMC reset, but things are fine without drive in bay (and I've another 3 drives in bays working fine including my main Boot drive).
    I'd let Disk Warrior do it's work if I didn't think I'd get a kernel panic halfway through... which worries me.. I'd tried booting from Disk Warrior's bootdisk CD and got a kernel panic during boot.
    I've now been using this mac for 5 hours now without drive in bay so it's not the mac itself.
    Is there anyway of deleting possibly corrupt journal (spotlight does seems to constantly re-index on startup - but only when said drive is in bay) maybe with Terminal?
    I'm wary of repartioning as I'll surely get a k/p during the process...

  • Will using an external hard drive cause me to have duplicate files on my itunes library?

    I put all my ITUNES MEDIA folder on my external hard drive from my older computer.. I recently bought a new computer and installed Itunes. I synced some of my Itunes purchased songs back on by using my Ipod.. however the songs I ripped from my cds are still not reinstalled in my library.. I will have to use my external hard drive or re rip those.. and there are a lot of them.. since I have already replaced some of the ones I purchased back on using my Ipod will it duplicate them if I use the prefrences method and return them all from my external hard drive? If i delete my files that I have already returned on my new computer before using my external will Itunes remember which are Itunes purchased music and which arent as well>??? also how exactly do you move music from an external? just plug it in and click the prefrences box about syncing files and keeping Itunes library organized?? any other thing to click?

    An iTunes library consists of both the media and the database that knows which files are in the library and hold details of ratings, playcounts, playlist membership and other details not stored in each file's metadata.
    Depending on how you have moved content to your external drive you may find you are only moved the media, but not the database. If you import this media into a new library it will work, but your library will be seen as "new" with respect to any devices that you have and iTunes will want to erase and reload them, losing you current selections, settings and data on the device.
    These are two possible approaches that will normally work to move an existing library to a new computer.
    Method 1
    Backup the library with this User Tip.
    Deauthorize the old computer if you no longer want to access protected content on it.
    Restore the backup to your new computer using the same tool used to back it up.
    Keep your backup up-to-date in future.
    Method 2
    Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
    Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
    I'd recommend method 1 since it establishes an ongoing backup for your library.
    If you have an iOS device that syncs with contact & calendar data on your computer you should migrate this information too. If that isn't possible create a dummy entry of each type in your new profile and iTunes should offer to merge the existing data from the device into the computer, otherwise the danger is that it will wipe the information from the device.
    If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable. Alternatively you could copy over the iTunes folder and make sure your external drive has the same drive letter on the new system as the old, however moving the library into a portable form will make every subsequent move that much easier.
    Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.
    tt2

  • Chirping Noise from Hard Drive Causing iMac to Freeze Up!

    Hope someone can give me some pointers to figure this one out!
    The computer will begin making high-pitch, squeaky chirping noises from the upper left corner (near the hard drive I think):
    http://homepage.mac.com/adamntaya/.cv/adamntaya/Sites/.Public/Chirping%20Noise.m p3-zip.zip
    Then after a while it will totally freeze up and I have to reboot. It is happening more and more frequently. Already tried doing a Hardware Test, with good results. Already tried downloading MacJanitor. Already tried a PRAM Reset. Nothing has helped the problem yet.
    What can I try?
    iMac G5 20" 1.8 GHz   Mac OS X (10.4.4)   160MB HD, 1G Memory (1st Gen)

    I had this exact problem, (exactly the same sound) with an eMac I had about a year ago. Our situations were the same, and after many calls and hours talking to Apple I got wound up getting a new iMac to replace to eMac, just paying the difference. They first wanted to take the computer in, which is what will happen when you call, but I would say that you would like to have a new one sent to you, as I assume you ordered it offline. Your problem and the one that I had seem to be quite rare, but nonetheless you should get a new computer.

  • External Hard Drive Causing Force quit not to work

    I have 2 Lacie 500 gig FW 800 external drives daisy chained to my imac. I use one for Time Machine and one for weekly backups. After upgrading to 10.5.3 I noticed applications were freezing and I could not force quit. Today Microsoft Word froze and I noticed when I went to force quit, (holding the mouse button down on the icon to get menu) that one of my drives spun up. I disconnected the FW800 cable from my Mac and the application unfroze. Help are my drive incompatible now in 10.5.3? Is something wrong with one of my drives?

    Try running repair permissions in Disk Utility on your hard drives.

  • Copy fonts to hard drive causes size to be zero k.

    iMac intel
    OS10.6.5
    We use fonts from various customers. They reside with other files on a file server. When needed, we copy to local hard drive to activate using Suitcase Fusion 3.
    We have noticed that sometimes the Font Suitcase file loses its size when copied. We can open the fonts over the network ok, but when copied to the local drive they are whacked.
    Any insight would be appreciated.

    Somehow, the fonts are getting their resource forks stripped when copied from the server to the Mac desktop. All Mac legacy suitcase style TrueType fonts and Type 1 PostScript fonts have their data in the resource fork. So when those get lost, there's nothing left. Hence the zero byte files.

  • Send to Final Cut Pro in Color off an external Hard Drive, causes Color to Crash

    Okay, so I'm having some Color issues guys...
    I'm color correcting a feature right now, and just completed the CC with Color. I did the entire color correct on an internal hard drive on a Mac Pro. My client wanted to take a look at the CC on a different machine, so I transferred all of the FCP files, Color Projects, footage, etc. (the ENTIRE directory from my machine) onto an external hard drive....
    ...When I opened the color project from the external drive on his machine, all of my media was gone, so of course I reconnected the media (directly from the source, the same source files I edited with in FCP), and everything was fine. My grades were there, and everything looked great....
    ....I rendered my Color sequence and tried to Send To Final Cut Pro, and color crashed on me. It continued to do this....
    ....I went back to my machine and tried to Send To Final Cut Pro, and everything worked just fine. What went wrong with the data transfer? Is that the reason Color keeps crashing? Is it because I relinked the footage in Color to the original source files? It doesn't make sense to me. All of the data from the original drive was moved to an external and relinked.
    I'm pretty new to Color so any help would be appreciated. Thanks so much!
    -Chris

    Copy the original project and media to the external drive using Media Manager. It will maintain the links.
    x

  • Click on hard drive causes Finder to quit

    I can't get to files on my hard drive. When I double-click on the icon it won't open and Finder relaunches itself.
    From these discussions, I have:
    deleted finder.plist
    repaired permissions
    booted up with install disk and ran Disk Repair ("minor repairs")
    This happened before I downloaded 10.4.10 which I thought might help but it hasn't.
    From open applications, I can access the files and save them to the desktop, I just can't get the hard drive to open.
    Any other thoughts?
    Thank you.

    Hello and Welcome to Apple Discussions.
    Grab your system restore disk. Make sure your MB is shut down. Now, while holding down the C key, press the power button and insert the disk all at the same time. When you see the Apple logo, let go of the C key. Now, an Installer window will open by default. Quit the Installer from the Menu and instead click Utilities/Disk Utility. When DU opens, select MacintoshHD in the panel on the left, then click Verify. If DU reports errors, click Repair. Hopefully that will solve this problem. To boot back up from your internal disk, just click Utilities/Startup Manager, select MacintoshHD 10.4.x and click Restart.
    Carolyn

  • Media on new external hard drive causing problems with FCP 4.1

    Hi gang
    I bought a new 160 gig external hard drive due to my internal media drives becoming fairly full of media (20 gigs left on each). The external is being used only for media. I removed ownership permissions on all the media drives but now when I boot up the computer, the external won't show on the desktop (am using the encryption keys that came with the drive). If this is the case I can open any FCP project. If I can get the external drive up on the desktop (usually by switching the firewire port from back to front), then none of my FCP projects will open up (have to force quit due to "not responding"). This is drivng me nuts!!
    Any ideas ??
    thanks . . . .

    Thanks for the replies. I bought the drive from an Apple reseller, told him it was for media storage and he sold me the drive with a Macally hardware encrypted "enclosure". I guess I could (or should have) increased the size of my three internal drives but will return this sucker as the replies I have received all indicate the encryption "feature" is one I don't need. Taking it back and thanks for the advice . . . as always this forum is extremely helpful !!
    Craig

  • An external hard drive causes ram to go to almost zero

    I have an external hard drive that has MP3 files on it.  The drive is Mac formatted and whenever I turn it on, the RAM drops to about 15mb and everything becomes slow.  I have transferred the MP3 files to another drive and the same thing happens. 

    Sounds like maybe Spotlight is Indexing the External Hard Drive.
    After connecting the External Hard Drive, look up at the magnifing glass on right side of your menu bar and check to see if the dot in the middle is going on and off.
    If you want the External Hard Drive Indexed so that you can use Spotlight to search for files, then allowing it to finish Indexing should free up some if not all that used RAM.
    If you do not want or need the drive Indexed, then go to: Apple > System Preferences > Spotlight > Privacy and add the External Hard Drive to Prevent Spotlight from searching that location:
    If that is not the problem, then perhaps it is to due with the way iTunes or someother music software is setup to use the files on the drive?

  • External hard drive causes Mavericks to freeze

    When connecting an external hard drive Mavericks just freeze, and the only thing I can do is to do a force shutdown. The external drives are Western Digital (USB 2.0) and LaCie (Firewire 800), connected to a MBP mid 2007 4 GB RAM running OS X 10.9.5. I did a clean install of Mavericks.
    I've tried to repair permissions but that didn't do the trick.
    I'm totally lost here, don't know what to do, so if anyone has any suggestions I would appreciate it a lot. Thanks.

    An Apple Hardware Test may provide a clue:
    http://support.apple.com/kb/ht1509
    Note that an error free AHT is not definitive.
    In any event an appointment at an Apple store genius bar may be the best option.   The diagnosis will be free regardless of the age of the MBP.  You will need to bring the external HDDs with you.
    Ciao.

Maybe you are looking for