Hard drive constantly cycling after 10.5.2 update

I'm not sure if I'm just more aware of it, by my hard drive seems to be cycling constantly since I upgraded to 10.5.2. Everything else seems to be working normally, but I'm concerned about the non-stop activity coming from my drive.
Any thoughts?

I seem to be having the same problem. My Time Machine drive is an external FW800 drive, which I have set to sleep whenever possible. Since 10.5.2, the drive will go to sleep, only to be awaken a few minutes later, cycling like this ad infinitum. I checked activity monitor and neither installdb or a print job is running.
I thought maybe a restart would help, so I restarted the machine and let it sit there with no apps running save Activity Monitor. The drive did the same thing, andI didn't see anything spike when the drive awoke, save for a tiny blip with mds.
Is this happening to anyone else?

Similar Messages

  • Now, USB External Hard Drive Not Recognized after 10.6.8 Update

    My external Hard Drive is not recognized on start up.  I have to unplug it and plug it back in for it to be recognized.
    All this since 10.6.8 updated today.
    I'm a fool for updating the same day.
    This has happened before and I always forget the bugs in the software when it first comes out.

    Alright, I'm gonna go ahead and close this thread. I found out the solution to my issue. Turns out it was a problem with a system file I changed right before installing. The error only occurred on a restart... the required 10.6.1 reboot was the first reboot since the change, so thus it looked like the culprit.
    If you want a more thorough explanation of my problem (highly HIGHLY doubt it's gonna help you guys out), check this thread --> http://forums.appleinsider.com/showpost.php?p=1480362&postcount=8
    Sorry for the trouble!

  • External Hard drive not reading after 10.3.9 update

    Hi there and thank you for this forum. I am wondering if anyone can help me through this maze of confusion...I have just recently upgraded from 10.3.5 to 10.3.9 and now I cannot access my external Fantom Drive. Both of the USB ports can read other devices, and also I can still read the Fantom from a PC, but when I plug it into my ibook, I get nothing.
    Can anyone recommend anything? Can I reinstall the original 10.3.5 software and be done with updates? The Fantom is not supposed to be affected by the 10.3.9 system, so I don't know what happened, but I can tell you that the only 2 times I have updated this mac, I have had serious problems! I won't be updating anymore!!!
    Thanks mates...

    You're welcome.....and thanks for acknowledging me in your post....
    I'm sure you would have thought of this workaround sooner or later....After 2 reinstalls of OSX this was my last resort.

  • Hard drive is corrupt after i repair it

    My hard drive reads corrupt after I repair it.  I restart it, hit C, and open it with a startup disk, then repair and restart it.  After a while, when I verify my disk, it says that is corrupt, AGAIN!!
    Please help
    I'm running a mac pro dual core 2 2.66 intel xeon processor, with 16GB of memory  My operating system is  10.6,8

    So you should have already made a couple backups, always have a spare bootable system drive, and in some cases zero it all - takes couple hours, and not use it except as spare extra backup.
    Getting files off your drive now but don't use it,, install OS to a new drive (pull the old one in fact temporary) and you may want to use checksum on all file copies, and for any files not on backup sets try best you can and if you still need help, then turn to Data Rescue 3.
    I would not use a DVD to do repairs, even if it is 10.6.0 or 10.6.3. I would use a clean small system drive with 10.6.8 (takes less than 30GB, even down to 16GB if careful) "emergency boot drive" used only for system maintenance and repairs.
    And if you had Lion, you don't, but, I would use Recovery Mode AND have that also cloned to another drive, using Carbon Copy Cloner (CCC).

  • Hard drive constantly running and ruining battery life

    Hello,
    I recently got an x200s from a legit ebay lenovo seller that came with an upgraded 500gb 7200rpm hard drive.
    The problem is that the hard drive is running at All times. I can tell from the sound as well as slight vibration. Even with the lowest power settings, and just letting it idle, it runs. I tried playing with the power manager, and having the hard drive stop activity after 30 seconds of inactivity, it keeps running. I turned off indexing on the c as well as the lenovo back up drive, its still running. The hard drive activity light is only flickering, and the processes seem totally normal. What is up?
    I'd say this also has to be the reason i'm only getting like 2 hours with the 4 cell  and very low power settings, which is unacceptable. 
    Any thoughts?
    Thanks guys

    Nah...if you choose a less-than-sensible setting in BIOS, an arm holding a hammer will come out of the LCD and smack you...that's a part of ThinkVantage that only a few people know about...
    How many processes do you have running on a freshly booted machine?
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • HT1751 My win8 pc hard drive failed.  After the hard drive was replaced, I copied iTunes Media backupfiles from external hard drive (Karen's Replicator was used).  ITunes does not recognize the back up files - help! (it does show cloud & recently burned m

    My win8 pc hard drive failed.  After the hard drive was replaced, I copied iTunes Media backupfiles from external hard drive (Karen's Replicator backup software was used).  ITunes does not recognize these back up files even though the location is the same as cloud & recently burned music that does show- help!  The backup files consist of 34,000+ songs; almost all burned from my own CD collection.  I do have most of the songs on an ipod classic but hesitate to try to restore from that.  Can someone tell me how to get these 34,000 songs to show up in iTunes?  Thanks!!

    This diagram shows how a typical iTunes library ought to be set out (click on it to enlarge)
    The red outline highlights the media folder and its contents, the various subfolders are only created if that kind of content is in your library. The right-hand side shows the files that should be found in the iTunes library folder; sentinel is normally hidden so may not be visible. The core of your iTunes library is the file iTunes Library.itl, you need to restore this, the other library files and the Album Artwork folder, as well as the media folder, to restore your library.
    tt2

  • I just had a new hard drive installed. After loading everything back on my computer from external drive, i came to the "select wireless network screen. I've misplaced the WEP password for my internet. Is there anyway to find it on another computer?

    i just had a new hard drive installed. After loading everything back on my computer from external drive, i came to the "select wireless network screen. I've misplaced the WEP password for my internet. Is there anyway to find it on another computer?

    Maybe. What kind of other computer are you talking about? What operating system is it running? What kind of wireless router are you using?
    Your best bet may be to just reset the router and set it up again.
    Just so you know, WEP is a very old security system for wireless and is considered insecure. If you have it available, use WPA2.

  • Hard drive stop spinning after a while

    I have a Lenovo laptop, running Arch Linux + KDE. I noticed that when I am on battery, the hard drive stop spinning after a while, and it's very annoying to listen the disk starting again, and again. and again. I'm not interested in save energy with this, so how can I deactivate it?
    I thought it was the laptop-mode, but I runned a systemctl status laptop-mode.service, and the service is inactive. Any idea of what could be triggering this?

    man hdparm. Check out -B and -S flags. hdparm -B255 -S0 /dev/your_drive should disable any powersaving settings altogether.
    You could use udev rule to run hdparm when you swithch to battery, but there are probably more elegant solutions as well.
    KDE might handle this via its own power settings as well. I haven't really used KDE ever, so I'm not sure about this, but it's still possible.

  • Usb hard drive not loading after security update

    usb hard drive not loading after security update
    I can't seem to find any other posts about this problem.
    I have three external hard rives connect by a USB hub to my iMac.
    Problem is that if I turn on the hard drive(s) AFTER start up I get a message that the drive either was not recognized by the OS or that it was ejected unexpectedly. 
    I get the same issue but not all the time if I turn them on before I boot the iMac.
    I used the disk drive utility to "repair" the drives but they always come back as "probably ok". 
    If I restart the iMac with the drives connected (on), it seems to work but not all the time.
    A bit annoying as I am wondering if the drives are OK or not.
    I don't always need the drives as they are for backing up images from my camera using Apreture.
    This all began after i did the latest security update.
    is the update to blame?
    mahalo.

    Yes, you can still use those instructions to reset the PRAM.
    You said that you booted to your install disk and that your primary drive did not show up at the Select a Destination screen? That usually means that the computer is either not recognizing your partition, or it's not recognizing the hard drive itself.
    Start with this article and follow all the steps even if you already tried them. I suspect that you'll get to step 4 and you'll end up having to call Applecare. If you haven't done those steps, they're most likely going to make you do them anyway, so you might as well get them done before the call.

  • IPod hard drive continuously cycles and drains the battery...

    I have a 60G; version 1.3 iPod.
    This is not an "every song, every podcast" situation, but I've noticed during certain songs/podcasts the iPod gets "stuck".
    The song will continue to play (although on occasion the iPod will crapout), but functionality is very slow to respond (i.e., pause, ff, rewind, etc.)
    I also notice that while the hard drive is cycling, the battery drains at an alarming rate.
    Please advise, thank you!

    I have a 60G; version 1.3 iPod.
    This is not an "every song, every podcast" situation, but I've noticed during certain songs/podcasts the iPod gets "stuck".
    The song will continue to play (although on occasion the iPod will crapout), but functionality is very slow to respond (i.e., pause, ff, rewind, etc.)
    I also notice that while the hard drive is cycling, the battery drains at an alarming rate.
    Please advise, thank you!

  • Do I need external hard drive to back up my iMac before update to mountain lion? My is OS 10.6.8

    Do I need external hard drive to back up my iMac before update to mountain lion? My is OS 10.6.8.

    First, repair your hard drive and permissions:
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    Second, make a bootable backup to an external drive using the Restore option of Disk Utility:
    Clone using Restore Option of Disk Utility
      1. Open Disk Utility in the Utilities folder.
      2. Select the destination volume from the left side list.
      3. Click on the Restore tab in the DU main window.
      4. Select the destination volume from the left side list and drag
           it to the Destination entry field.
      5. Select the source volume from the left side list and drag it to
          the Source entry field.
      6. Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal startup drive.
    Third, purchase and download Mountain Lion from the App Store. Be sure you meet the requirements for Mountain Lion:
    Upgrading to Mountain Lion
    To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mountain Lion - System Requirements
           Macs that can be upgraded to OS X Mountain Lion
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
             7. Xserve (Early 2009) - Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.
         For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

  • Hard drive constantly spinning up and down when asleep

    Hi all,
    I have a problem with an external USB 2.0 hard drive connected to my Mac mini (late 2012).
    When I put the computer to sleep the drive spins up to speed, stops, then immediately starts to spin up again. This goes on and on.
    I understand that drives will periodically spin up when asleep for spotlight indexing etc. However this seems like strange behaviour, it just repeats spinning up and down in an endless cycle.
    I have had the drive for a while now, as my time machine backup. Interestingly this problem only started after I rearranged my desk when I set up a second monitor. I have a USB 3.0 drive (my scratch disk) that behaves normally.
    I have drives set to not sleep in preferences.
    I have searched around but can only find posts about people not wanting to wait for drives to spin up when they open finder etc.
    What do you think? Could the drive be on its way out? It is a Samsung spinpoint f3 1tb in an Iomega enclosure, for information...
    I appreciate any help,
    Cheers,
    Mike

    Hi BDAqua,
    I should have noticed this earlier but it appears the problem is with the mini waking from sleep and thus causing the drives to wake.
    When I put the mini top sleep (without the external drives powered on) it constantly wakes and sleeps. The displays dont come back on (untiul you click the mouse or hit a key etc.) but you can hear the internal drive spin up and the sleep light comes on, then goes back to blinking until it wakes again.
    I have realised that it must be due to the second monitor that I have connected via the mini display port. It is connected using a mini display port to hdmi cable I bought from play.com. Something to do with the  display and thunderbolt is casuing the sleep function to misbehave, I think.
    Here is the console log that was created after sleeping the mini, allowing it to go through its weird sleep/wake cycle then fully waking it up again.
    Hope that makes sense, it is late and I am tired!
    Thanks for all your help.
    Mike
    21/05/2013 23:30:16.840 loginwindow[42]: ERROR | -[LWScreenLock(Private) screenIsLockedTimeExpired:] | No lock state found, use built in check
    21/05/2013 23:30:16.000 kernel[0]: HID tickle 43809 ms
    21/05/2013 23:30:18.747 WindowServer[93]: Created shield window 0xc1 for display 0x003f003f
    21/05/2013 23:30:18.747 WindowServer[93]: handle_will_sleep_auth_and_shield_windows: no lock state data
    21/05/2013 23:30:18.752 WindowServer[93]: handle_will_sleep_auth_and_shield_windows: no lock state data
    21/05/2013 23:30:18.766 WindowServer[93]: Created shield window 0xc2 for display 0x003f003d
    21/05/2013 23:30:18.766 WindowServer[93]: handle_will_sleep_auth_and_shield_windows: no lock state data
    21/05/2013 23:30:18.784 airportd[1018]: _doAutoJoin: Already associated to “ASUS60”. Bailing on auto-join.
    21/05/2013 23:30:19.169 WindowServer[93]: handle_will_sleep_auth_and_shield_windows: no lock state data
    21/05/2013 23:30:19.206 loginwindow[42]: resume called when there was already a timer
    21/05/2013 23:30:19.000 kernel[0]: en1: BSSID changed to 10:bf:48:3e:02:74
    21/05/2013 23:30:58.348 com.apple.backupd-helper[1028]: Not starting Time Machine backup after wake - failed to resolve alias to backup volume.
    21/05/2013 23:31:02.141 WindowServer[93]: CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
    21/05/2013 23:31:02.142 loginwindow[42]: find_shared_window: WID -1
    21/05/2013 23:31:02.142 loginwindow[42]: CGSGetWindowTags: Invalid window 0xffffffff
    21/05/2013 23:31:02.142 loginwindow[42]: find_shared_window: WID -1
    21/05/2013 23:31:02.142 loginwindow[42]: CGSSetWindowTags: Invalid window 0xffffffff
    21/05/2013 23:31:02.307 WindowServer[93]: Created shield window 0xc8 for display 0x78c8d2fe
    21/05/2013 23:31:02.311 WindowServer[93]: Created shield window 0xc9 for display 0x78c8d1b0
    21/05/2013 23:31:02.311 WindowServer[93]: device_generate_desktop_screenshot: authw 0x7fd5b9025b30(2000), shield 0x7fd5b3105bb0(2001)
    21/05/2013 23:31:02.352 com.apple.time[11]: Next maintenance wake [Backup Interval]: <date: 0x7fc0e5906240> Tue May 21 23:42:48 2013 BST (approx)
    21/05/2013 23:31:02.352 com.apple.time[11]: Requesting maintenance wake [Backup Interval]: <date: 0x7fc0e5906240> Tue May 21 23:42:48 2013 BST (approx)
    21/05/2013 23:31:02.370 WindowServer[93]: device_generate_desktop_screenshot: authw 0x7fd5b9025b30(2000), shield 0x7fd5b3105bb0(2001)
    21/05/2013 23:31:02.389 WindowServer[93]: device_generate_lock_screen_screenshot: authw 0x7fd5b9025b30(2000), shield 0x7fd5b3105bb0(2001)
    21/05/2013 23:31:02.000 kernel[0]: AirPort_Brcm43xx::powerChange: System Sleep
    21/05/2013 23:31:04.000 kernel[0]: en1: BSSID changed to 10:bf:48:3e:02:74
    21/05/2013 23:31:04.000 kernel[0]: LE is supported - Disable LE meta event
    21/05/2013 23:31:04.000 kernel[0]: wlEvent: en1 en1 Link DOWN virtIf = 0
    21/05/2013 23:31:04.000 kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
    21/05/2013 23:31:04.000 kernel[0]: en1::IO80211Interface::postMessage bssid changed
    21/05/2013 23:31:04.000 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link down on en0
    21/05/2013 23:31:04.000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 12 unplug = 0
    21/05/2013 23:31:10.000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 0
    21/05/2013 23:31:10.000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 12 unplug = 0
    21/05/2013 23:31:10.000 kernel[0]: TBT W (2): 0x0010 [√]
    21/05/2013 23:31:10.000 kernel[0]: Wake reason: EC.DarkPME (Maintenance)
    21/05/2013 23:31:10.000 kernel[0]: AirPort_Brcm43xx::powerChange: System Wake - Full Wake/ Dark Wake / Maintenance wake
    21/05/2013 23:31:10.000 kernel[0]: Previous Sleep Cause: 5
    21/05/2013 23:31:10.000 kernel[0]: en1: 802.11d country code set to 'X3'.
    21/05/2013 23:31:10.000 kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
    21/05/2013 23:31:10.000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 1
    21/05/2013 23:31:10.965 configd[18]: network changed: v4(en0-:192.168.1.190, en1-:192.168.1.47) DNS- Proxy- SMB
    21/05/2013 23:31:11.549 hidd[46]: MultitouchHID: device bootloaded
    21/05/2013 23:31:11.632 hidd[46]: MultitouchHID: device bootloaded
    21/05/2013 23:31:11.000 kernel[0]: en1: 802.11d country code set to 'US'.
    21/05/2013 23:31:11.000 kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
    21/05/2013 23:31:11.000 kernel[0]: MacAuthEvent en1   Auth result for: 10:bf:48:3e:02:74  MAC AUTH succeeded
    21/05/2013 23:31:11.000 kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0
    21/05/2013 23:31:11.000 kernel[0]: AirPort: Link Up on en1
    21/05/2013 23:31:11.000 kernel[0]: en1: BSSID changed to 10:bf:48:3e:02:74
    21/05/2013 23:31:11.000 kernel[0]: en1::IO80211Interface::postMessage bssid changed
    21/05/2013 23:31:12.000 kernel[0]: en1: 802.11d country code set to 'GB'.
    21/05/2013 23:31:12.000 kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
    21/05/2013 23:31:12.000 kernel[0]: Graphics suppressed 2116 ms
    21/05/2013 23:31:12.000 kernel[0]: AirPort: RSN handshake complete on en1
    21/05/2013 23:31:12.454 configd[18]: network changed: v4(en1+:192.168.1.47) DNS+ Proxy+ SMB
    21/05/2013 23:31:12.466 UserEventAgent[11]: Captive: en1: Not probing 'ASUS60' (protected network)
    21/05/2013 23:31:12.470 configd[18]: network changed: v4(en1!:192.168.1.47) DNS Proxy SMB
    21/05/2013 23:31:12.895 airportd[1030]: _doAutoJoin: Already associated to “ASUS60”. Bailing on auto-join.
    21/05/2013 23:31:12.915 airportd[1030]: _doAutoJoin: Already associated to “ASUS60”. Bailing on auto-join.
    21/05/2013 23:31:13.000 kernel[0]: nd6_na_input: duplicate IP6 address fe80:0005::22c9:d0ff:fe8f:b1eb
    21/05/2013 23:31:14.000 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,2301,0de1,0300,c5e1,3800]
    21/05/2013 23:31:14.757 configd[18]: network changed: v4(en0+:192.168.1.190, en1) DNS! Proxy! SMB
    21/05/2013 23:31:14.776 mDNSResponder[39]:  78: Could not write data to clientPID[-1]()  because of error - aborting connection
    21/05/2013 23:31:14.779 mDNSResponder[39]:  78: DNSServiceGetAddrInfo      v4v6 39-courier.push.apple.com. PID[-1]()
    21/05/2013 23:31:15.000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 0
    21/05/2013 23:31:16.000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 1
    21/05/2013 23:31:17.426 com.apple.time[11]: Next maintenance wake [Backup Interval]: <date: 0x7fc0e3201de0> Tue May 21 23:42:48 2013 BST (approx)
    21/05/2013 23:31:17.426 com.apple.time[11]: Requesting maintenance wake [Backup Interval]: <date: 0x7fc0e3201de0> Tue May 21 23:42:48 2013 BST (approx)
    21/05/2013 23:31:17.000 kernel[0]: AirPort_Brcm43xx::powerChange: System Sleep
    21/05/2013 23:31:17.000 kernel[0]: en1: BSSID changed to 10:bf:48:3e:02:74
    21/05/2013 23:31:17.000 kernel[0]: wlEvent: en1 en1 Link DOWN virtIf = 0
    21/05/2013 23:31:17.000 kernel[0]: LE is supported - Disable LE meta event
    21/05/2013 23:31:17.000 kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
    21/05/2013 23:31:17.000 kernel[0]: en1::IO80211Interface::postMessage bssid changed
    21/05/2013 23:31:17.000 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link down on en0
    21/05/2013 23:31:24.000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 0
    21/05/2013 23:31:24.000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 1
    21/05/2013 23:31:24.000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 12 unplug = 0
    21/05/2013 23:31:24.000 kernel[0]: TBT W (2): 0x0010 [√]
    21/05/2013 23:31:24.000 kernel[0]: Wake reason: EC.DarkPME (Maintenance)
    21/05/2013 23:31:24.000 kernel[0]: AirPort_Brcm43xx::powerChange: System Wake - Full Wake/ Dark Wake / Maintenance wake
    21/05/2013 23:31:24.000 kernel[0]: Previous Sleep Cause: 5
    21/05/2013 23:31:24.006 configd[18]: network changed: v4(en0:192.168.1.190, en1-:192.168.1.47) DNS* Proxy SMB
    21/05/2013 23:31:24.010 mDNSResponder[39]: DeregisterInterface: Frequent transitions for interface en1 (192.168.1.47)
    21/05/2013 23:31:24.973 configd[18]: network changed: v4(en0-:192.168.1.190) DNS- Proxy- SMB
    21/05/2013 23:31:24.978 mDNSResponder[39]: DeregisterInterface: Frequent transitions for interface en0 (192.168.1.190)
    21/05/2013 23:31:25.269 hidd[46]: MultitouchHID: device bootloaded
    21/05/2013 23:31:25.277 hidd[46]: MultitouchHID: device bootloaded
    21/05/2013 23:31:26.000 kernel[0]: MacAuthEvent en1   Auth result for: 10:bf:48:3e:02:74  MAC AUTH succeeded
    21/05/2013 23:31:26.000 kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0
    21/05/2013 23:31:26.000 kernel[0]: AirPort: Link Up on en1
    21/05/2013 23:31:26.000 kernel[0]: en1: BSSID changed to 10:bf:48:3e:02:74
    21/05/2013 23:31:26.000 kernel[0]: en1::IO80211Interface::postMessage bssid changed
    21/05/2013 23:31:26.000 kernel[0]: Graphics suppressed 2278 ms
    21/05/2013 23:31:26.000 kernel[0]: AirPort: RSN handshake complete on en1
    21/05/2013 23:31:26.580 configd[18]: network changed: v4(en1+:192.168.1.47) DNS+ Proxy+ SMB
    21/05/2013 23:31:26.583 mDNSResponder[39]: mDNS_RegisterInterface: Frequent transitions for interface en1 (FE80:0000:0000:0000:22C9:D0FF:FE8F:B1EB)
    21/05/2013 23:31:26.583 mDNSResponder[39]: mDNS_RegisterInterface: Frequent transitions for interface en1 (192.168.1.47)
    21/05/2013 23:31:26.590 configd[18]: setting hostname to "mikemini"
    21/05/2013 23:31:26.592 UserEventAgent[11]: Captive: en1: Not probing 'ASUS60' (protected network)
    21/05/2013 23:31:26.596 configd[18]: network changed: v4(en1!:192.168.1.47) DNS Proxy SMB
    21/05/2013 23:31:27.016 airportd[1030]: _doAutoJoin: Already associated to “ASUS60”. Bailing on auto-join.
    21/05/2013 23:31:27.000 kernel[0]: nd6_na_input: duplicate IP6 address fe80:0005::22c9:d0ff:fe8f:b1eb
    21/05/2013 23:31:28.000 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,0301,0de1,0300,c5e1,3800]
    21/05/2013 23:31:28.797 configd[18]: network changed: v4(en0+:192.168.1.190, en1) DNS! Proxy! SMB
    21/05/2013 23:31:28.803 mDNSResponder[39]: mDNS_RegisterInterface: Frequent transitions for interface en0 (FE80:0000:0000:0000:AA20:66FF:FE11:3086)
    21/05/2013 23:31:28.803 mDNSResponder[39]: mDNS_RegisterInterface: Frequent transitions for interface en0 (192.168.1.190)
    21/05/2013 23:31:28.816 mDNSResponder[39]:  78: Could not write data to clientPID[-1]()  because of error - aborting connection
    21/05/2013 23:31:28.819 mDNSResponder[39]:  78: DNSServiceGetAddrInfo      v4v6 13-courier.push.apple.com. PID[-1]()
    21/05/2013 23:31:28.835 configd[18]: setting hostname to "MikeMini.local"
    21/05/2013 23:31:30.000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 0
    21/05/2013 23:31:31.000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 1
    21/05/2013 23:31:33.745 loginwindow[42]: ERROR | -[LWScreenLock(Private) screenIsLockedTimeExpired:] | No lock state found, use built in check
    21/05/2013 23:31:33.000 kernel[0]: HID tickle 9738 ms
    21/05/2013 23:31:35.674 WindowServer[93]: Created shield window 0xca for display 0x003f003f
    21/05/2013 23:31:35.674 WindowServer[93]: handle_will_sleep_auth_and_shield_windows: no lock state data
    21/05/2013 23:31:35.679 WindowServer[93]: handle_will_sleep_auth_and_shield_windows: no lock state data
    21/05/2013 23:31:35.700 WindowServer[93]: Created shield window 0xcb for display 0x003f003d
    21/05/2013 23:31:35.701 WindowServer[93]: handle_will_sleep_auth_and_shield_windows: no lock state data
    21/05/2013 23:31:35.712 airportd[1030]: _doAutoJoin: Already associated to “ASUS60”. Bailing on auto-join.
    21/05/2013 23:31:36.104 WindowServer[93]: handle_will_sleep_auth_and_shield_windows: no lock state data
    21/05/2013 23:31:36.129 loginwindow[42]: resume called when there was already a timer
    21/05/2013 23:31:36.000 kernel[0]: en1: BSSID changed to 10:bf:48:3e:02:74
    21/05/2013 23:31:36.896 coreaudiod[1003]: HALDefaultDevice::GetDefaultDevice: server returned 0 for the default device, so picking one locally
    21/05/2013 23:31:36.897 coreaudiod[1003]: HALDefaultDevice::GetDefaultDevice: server returned 0 for the default device, so picking one locally
    21/05/2013 23:31:37.669 WindowServer[93]: Received display connect changed for display 0x78c8d1b0
    21/05/2013 23:31:37.683 WindowServer[93]: Created shield window 0xcc for display 0x78c8d1b0
    21/05/2013 23:31:37.683 WindowServer[93]: handle_will_sleep_auth_and_shield_windows: no lock state data
    21/05/2013 23:31:37.684 WindowServer[93]: Received display connect changed for display 0x3f003d
    21/05/2013 23:31:37.684 WindowServer[93]: Received display connect changed for display 0x78c8d2fe
    21/05/2013 23:31:39.009 WindowServer[93]: Received display connect changed for display 0x78c8d1b0
    21/05/2013 23:31:39.026 WindowServer[93]: Created shield window 0xcd for display 0x78c8d1b0
    21/05/2013 23:31:39.026 WindowServer[93]: handle_will_sleep_auth_and_shield_windows: no lock state data
    21/05/2013 23:31:39.027 WindowServer[93]: Received display connect changed for display 0x3f003d
    21/05/2013 23:31:39.027 WindowServer[93]: Received display connect changed for display 0x3f003e
    21/05/2013 23:31:39.051 WindowServer[93]: Created shield window 0xce for display 0x78c8d2fe
    21/05/2013 23:31:39.051 WindowServer[93]: handle_will_sleep_auth_and_shield_windows: no lock state data
    21/05/2013 23:31:39.490 WindowServer[93]: Display 0x78c8d1b0: GL mask 0x1; bounds (1920, 0)[1920 x 1080], 16 modes available
    Active, on-line, enabled, boot, OpenGL-accel, Vendor 5e3, Model 2353, S/N 572, Unit 0, Rotation 0
    UUID 0x000005e3000023530000057200000000, ColorProfile { 3, "HD 709-A Calibrated"}
    21/05/2013 23:31:39.490 WindowServer[93]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000007, accelerator 0x000032af, unit 0, caps QEX|QGL|MIPMAP, vram 1412 MB
    texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
    21/05/2013 23:31:39.490 WindowServer[93]: Display 0x003f003d: GL mask 0x2; bounds (4864, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003d
    21/05/2013 23:31:39.491 WindowServer[93]: Display 0x003f003f: GL mask 0x8; bounds (4865, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003f
    21/05/2013 23:31:39.491 WindowServer[93]: Display 0x78c8d2fe: GL mask 0x4; bounds (0, 0)[1920 x 1080], 16 modes available
    Main, Active, on-line, enabled, OpenGL-accel, Vendor 5e3, Model 2353, S/N 63d, Unit 2, Rotation 0
    UUID 0x000005e3000023530000063d00000000, ColorProfile { 3, "HD 709-A Calibrated"}
    21/05/2013 23:31:39.491 WindowServer[93]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000007, accelerator 0x000032af, unit 0, caps QEX|QGL|MIPMAP, vram 1412 MB
    texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
    21/05/2013 23:31:39.685 WindowServer[93]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    21/05/2013 23:31:39.713 WindowServer[93]: Display 0x78c8d2fe: MappedDisplay Unit 2; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
    21/05/2013 23:31:39.714 WindowServer[93]: Display 0x78c8d1b0: MappedDisplay Unit 0; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
    21/05/2013 23:31:39.730 WindowServer[93]: Display 0x78c8d2fe: MappedDisplay Unit 2; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
    21/05/2013 23:31:39.730 WindowServer[93]: Display 0x78c8d1b0: MappedDisplay Unit 0; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
    21/05/2013 23:31:39.805 WindowServer[93]: Created shield window 0xcf for display 0x78c8d1b0
    21/05/2013 23:31:39.806 WindowServer[93]: Created shield window 0xd0 for display 0x003f003d
    21/05/2013 23:31:39.806 WindowServer[93]: Created shield window 0xd1 for display 0x003f003f
    21/05/2013 23:31:39.811 WindowServer[93]: Created shield window 0xd2 for display 0x78c8d2fe
    21/05/2013 23:31:39.841 WindowServer[93]: Display 0x78c8d1b0: MappedDisplay Unit 0: Startup Mode 1920 x 1080, CGSThirtytwoBitColor, Resolution 1, IOMode 0x80000000, IODepth 0x0, IOReturn 0x0
    21/05/2013 23:31:39.841 WindowServer[93]: Display 0x78c8d2fe: MappedDisplay Unit 2: Startup Mode 1920 x 1080, CGSThirtytwoBitColor, Resolution 1, IOMode 0x80000000, IODepth 0x0, IOReturn 0x0
    21/05/2013 23:31:39.842 WindowServer[93]: Display added
    21/05/2013 23:31:39.842 WindowServer[93]: Display removed
    21/05/2013 23:31:39.875 WindowServer[93]: Display 0x78c8d2fe: GL mask 0x4; bounds (0, 0)[1920 x 1080], 16 modes available
    Main, Active, on-line, enabled, OpenGL-accel, Vendor 5e3, Model 2353, S/N 63d, Unit 2, Rotation 0
    UUID 0x000005e3000023530000063d00000000, ColorProfile { 3, "HD 709-A Calibrated"}
    21/05/2013 23:31:39.876 WindowServer[93]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000007, accelerator 0x000032af, unit 0, caps QEX|QGL|MIPMAP, vram 1412 MB
    texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
    21/05/2013 23:31:39.876 WindowServer[93]: Display 0x78c8d1b0: GL mask 0x1; bounds (1920, 0)[1920 x 1080], 16 modes available
    Active, on-line, enabled, boot, OpenGL-accel, Vendor 5e3, Model 2353, S/N 572, Unit 0, Rotation 0
    UUID 0x000005e3000023530000057200000000, ColorProfile { 3, "HD 709-A Calibrated"}
    21/05/2013 23:31:39.876 WindowServer[93]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000007, accelerator 0x000032af, unit 0, caps QEX|QGL|MIPMAP, vram 1412 MB
    texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
    21/05/2013 23:31:39.876 WindowServer[93]: Display 0x003f003d: GL mask 0x2; bounds (4864, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003d
    21/05/2013 23:31:39.876 WindowServer[93]: Display 0x003f003f: GL mask 0x8; bounds (4865, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003f
    21/05/2013 23:31:39.883 WindowServer[93]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x78c8d2fe device: 0x10646ea10  isBackBuffered: 1 numComp: 3 numDisp: 3
    21/05/2013 23:31:39.892 WindowServer[93]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x78c8d1b0 device: 0x10646e110  isBackBuffered: 1 numComp: 3 numDisp: 3
    21/05/2013 23:31:41.029 WindowServer[93]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    21/05/2013 23:31:41.059 WindowServer[93]: Display 0x78c8d2fe: MappedDisplay Unit 2; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
    21/05/2013 23:31:41.059 WindowServer[93]: Display 0x78c8d1b0: MappedDisplay Unit 0; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
    21/05/2013 23:31:41.062 WindowServer[93]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    21/05/2013 23:31:41.076 WindowServer[93]: Display 0x78c8d2fe: MappedDisplay Unit 2; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
    21/05/2013 23:31:41.076 WindowServer[93]: Display 0x78c8d1b0: MappedDisplay Unit 0; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
    21/05/2013 23:31:41.088 WindowServer[93]: Display 0x78c8d2fe: MappedDisplay Unit 2; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
    21/05/2013 23:31:41.089 WindowServer[93]: Display 0x78c8d1b0: MappedDisplay Unit 0; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
    21/05/2013 23:31:41.103 WindowServer[93]: Display 0x78c8d2fe: MappedDisplay Unit 2; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
    21/05/2013 23:31:41.104 WindowServer[93]: Display 0x78c8d1b0: MappedDisplay Unit 0; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
    21/05/2013 23:31:41.843 WindowServer[93]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    21/05/2013 23:31:41.846 WindowServer[93]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    21/05/2013 23:31:41.871 WindowServer[93]: Display 0x78c8d2fe: MappedDisplay Unit 2; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
    21/05/2013 23:31:41.871 WindowServer[93]: Display 0x78c8d2fe: MappedDisplay Unit 2; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
    21/05/2013 23:31:41.872 WindowServer[93]: Display 0x78c8d1b0: MappedDisplay Unit 0; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
    21/05/2013 23:31:41.872 WindowServer[93]: Display 0x78c8d1b0: MappedDisplay Unit 0; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
    21/05/2013 23:31:41.889 WindowServer[93]: Display 0x78c8d2fe: MappedDisplay Unit 2; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
    21/05/2013 23:31:41.889 WindowServer[93]: Display 0x78c8d2fe: MappedDisplay Unit 2; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
    21/05/2013 23:31:41.890 WindowServer[93]: Display 0x78c8d1b0: MappedDisplay Unit 0; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
    21/05/2013 23:31:41.890 WindowServer[93]: Display 0x78c8d1b0: MappedDisplay Unit 0; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
    21/05/2013 23:32:20.130 com.apple.backupd-helper[1043]: Not starting Time Machine backup after wake - failed to resolve alias to backup volume.

  • Memory Usage And Hard Drive Activity Increase After Latest Upgrade

    I have upgraded to Firefox 3.6.15 and latest Adobe Flash Player. Then i noticed that plugin-container started to take a lot of memory as much as Firefox itself totaling around 600Mb. Then i see hard drive activity intermittently slowing down my laptop and making it unresponsive for a short period of time. I have 50 tabs open. I have disabled Flash and since then plugin-container takes very little memory and i don't see consistent hard drive activity.
    I need Flash and i don't want to disable it. Is there a solution to this?

    I am seeking solutions for same problem.  When playing simple online games such as solitaire my memory usage for the plug in container is 300-600 mb while FireFox may only be 80-120 (with several windows or tabs open of mostly text pages). If I disable Adobe add-ons memory usage is greatly reduced. If I understood correctly it is possible to disable the plugin container and run adobe via the old method and another user thought that would solve the problem. I do not understand how it would make a difference but if you havent found a solution you may want to try it.  See these 2 threads in the Mozilla forum:
    A question and brief  explanation  and   how to disable plugin container in config
    I've previously had problems with Adobe crashing Firefox . At least now with Adobe being in the plugin container Firefox does not crash along with it.
    I have another issue - I can sometimes still hear the music from a game after I have exited the game and closed the window. I would like to know how to release the resources used by Adobe - kind of like FireFox's RamBack.
    Well, good luck to you (and me!)

  • Hard drive not recognized after lion upgrade

    My hard drive WD "My Book Studio Edition 1TB" mounts and unmounts non stop. Firewire or UBS is the same. Also with a new firmware of the disk and after a formatting. The file system is HFS+ journaled. My hardware is an iMac early 2009 24". No problems with all the other OS.
    What's happen with Lion, Apple?

    Hey Yelghoul,
         Make sure that the drive does not have the WD encryption stuff on it. That causes the Mac to render the drive unreadable and useless. Use another computer to remove the software and any passwords on it. Then plug the drive back in. If there are no files on it, simply open "Disk Utility" under "Utilities" to reformat the drive to make it usable with Lion or other computers.
    Best of luck,
    @youyouxue
    Lion Developer

  • Hard drive not recognized AFTER installing leopard

    So I installed Leopard on my 12in Powerbook G4, having the usual problem of non-recognition of my hard drive (from a third party) but was able to install Leopard after fiddling with disk utility.
    Now the computer will not recognize the hard drive after I restarted it. I've tried rebooting holding down the option key and selecting the hard drive and it still didn't recognize after restarting (it shows a prohibit sign). Also tried booting in single-user mode but it keeps waiting for the root device forever.
    Has anybody had a similar problem?

    Unplugging worked!!!
    I have no idea what PRAM is but someone said that unplugging your computer resets it so, I thought I'd give unplugging a shot. So, I shut down my computer and unplugged it. I also unplugged the power on the HD. (because I wasn't sure which one they were talking about.)
    Anyway, I went away for about five minutes.
    I came back plugged in the HD power first. Then, I plugged in the power cord for the computer and turned it on.
    As soon as I logged in I was asked if I wanted to use my external HD for Time Machine backups.
    I saw the icon for the HD on the Desktop where is belongs. I can open the drive and access the files with no problem.
    Try this if you haven't yet.

Maybe you are looking for

  • USB-C to DisplayPort Cable Problem

    I purchased a USB-C to DisplayPort cable from Google Store. When I plug it in to the 12-inch macbook, I get a USB Devices Disabled error message, even with no device connected on the displayport side.  I've tried doing the SMC and NVRAM resets.  The

  • Create a deposit for bill of exchange

    Hello professionals I try to create a deposit for bill of exchange but without success..here is my code SAPbobsCOM.BillOfExchangeTransaction oBOEtrans = (SAPbobsCOM.BillOfExchangeTransaction)Program.oDiCompany.GetBusinessObject(SAPbobsCOM.BoObjectTyp

  • Apple support, does it exist?

    I have been without access to my email for over 24 hours.  Apple provides no information about what the problem is or what they are doing it to fix it.  The support seems quite poor - and I believe I am being kind.

  • Itunes producer 2.4

    I am trying to submit an ebook to apple using the itunes producer 2.4. Does anyone know where the link is to download itunes producer

  • Newly installed TB on Windows 8.1 64 bit computer misbehaving

    Downloading is generally fast, but stops unpredictabily. But worse, if I try to delete or open mail, TBird usually freezes and tells me it's "not responding". I tried uninstalling and reinstalling twice, and what comes up is always what I had previou