Hard drive constantly running with Lightroom 6

Ever since I upgraded to Lightroom 6 my hard drive hasn't taken a break while Lightroom is open. It constantly runs until I close Lightroom. Another issue I'm having is not all my NEF files are converting to dng? Anyone else having these issues?

Nah...if you choose a less-than-sensible setting in BIOS, an arm holding a hammer will come out of the LCD and smack you...that's a part of ThinkVantage that only a few people know about...
How many processes do you have running on a freshly booted machine?
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Similar Messages

Why is my hard drive constantly running and how do I stop it?

My hard drive is running constantly and I can't find out why. I thought my hard drive might be at capacity so I threw away and backed up a lot of stuff, but it is still running all the time.
On a PC I know how to find what is actually running behind the scenes and how to stop them, but I don't know how to find those same programs on a mac. Any help would be appreciated, Thanks

On a PC I know how to find what is actually running behind the scenes and how to stop them, but I don't know how to find those same programs on a mac.
Open Applications/Utilities/Activity Monitor.
With that, all processes can be seen, all CPU, memory and drive use can be monitored and any and all processes can be monitored, sampled, halted, etc.
My hard drive is running constantly and I can't find out why.
A new drive will have indexing running continually until the indexing is done.
mdworker is one of the indexing processes.
Are your Energy Saver Preferences set to spin down hard drives when possible?

Hard drive constantly running and ruining battery life

Hello,
I recently got an x200s from a legit ebay lenovo seller that came with an upgraded 500gb 7200rpm hard drive.
The problem is that the hard drive is running at All times. I can tell from the sound as well as slight vibration. Even with the lowest power settings, and just letting it idle, it runs. I tried playing with the power manager, and having the hard drive stop activity after 30 seconds of inactivity, it keeps running. I turned off indexing on the c as well as the lenovo back up drive, its still running. The hard drive activity light is only flickering, and the processes seem totally normal. What is up?
I'd say this also has to be the reason i'm only getting like 2 hours with the 4 cell and very low power settings, which is unacceptable.
Any thoughts?
Thanks guys

Nah...if you choose a less-than-sensible setting in BIOS, an arm holding a hammer will come out of the LCD and smack you...that's a part of ThinkVantage that only a few people know about...
How many processes do you have running on a freshly booted machine?
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

My hard-drive crashed, I own lightroom 5, where can I download it again t re install it. The ADOBE email I had has links that no longer work (thanks for that). Running Windows 7 Home Premium

My hard-drive crashed, I own Lightroom 5, where can I download it again t re install it. The ADOBE email I had has links that no longer work (thanks for that). Running Windows 7 Home Premium

Hello Andrea,
did you try this: http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_lightroom&promoid&promoid=DT EML
What concerns your eMail you should talk to Adobe, please have a look there: http://helpx.adobe.com/de/contact.html by clicking throug their questions and if "open" please use chat, I had the best experiences.
Hans-Günter

I have a macbook pro with only 128gb of hard drive. I have lightroom installed and all my photos on an external hard drive. Can I store my lightroom library on the external hard drive too?

I have a macbook pro with only 128gb of hard drive. I have lightroom installed and all my photos on an external hard drive. Can I store my lightroom library on the external hard drive too?

Yes. Find the LR catalog file by looking in Edit/Catalog Settings/General. Close LR and navigate to that spot. The catalog file is the one that ends in .lrcat - move it to wherever you want. Next to the .lrcat file is a subfolder called Previews.lrdata. You can move that over as well, but if you don't LR will generate new previews. Double-click on the .lrcat file in its new home and LR will open with that catalog. Set Preferences to When Starting Up Use Most Recent Catalog.

I currently have a MAC Mini, which has 1 Firewire 800 port. I have a 1TB external hard disk that runs at Firewire 400. Can I insert another external hard drive that runs at Firewire 800?

Here's the deal. Currently running SL 10.6.8 on a MAC Mini. Planning for eventual upgrade to ML. Have a 1TB external hard drive partitioned into two volumes, one volume for Time Machine and one volume for SL which I periodically update using Superduper. Thus I always have a point-in-time bootable backup on the external hard drive.
The MAC Mini supports Firewire 800. However, booting from my current external hard disk is pretty slow, since it only supports Firewire 400. I am considering buying an Iomega MiniMax which supports Firewire 800. Then, I would use the MiniMax as my bootable backup volume, and relegate the older hard drive to Time Machine.
So, question #1 is, can I daisychain the new MiniMax between the MAC Mini and my existing external hard drive? My expectation is that the new Mini Max would run using Firewire 800 and that the existing hard drive would run at Firewire 400 speed as it does today. If it doesn't (e.g., daisychaining in the Firewire 400 external disk with the MiniMax Firewire 800 external disk ends up running the whole leg at 400), my resolution will be to run the existing hard disk off an available USB port and have just the MiniMax running at Firewire 800.
Why am I going to all this trouble? That's question #2. I don't trust upgrades; they always break something. When I upgraded from 10.5.x to 10.6.x, the web directories got renamed, and all of my web apps 403'd until I figured out what happened. Plus, I have accounts for other family members, and in order to ensure their ability to use the computer during my upgrade process, I need to have the ability to fall-back quickly to a known-stable version of OSX. So what I'm trying to do is insulate myself from problems by partitioning the MiniMax into two volumes, taking a Superduper image of my current installation on the Mac Mini to MiniMax external drive volume 1, then upgrading to ML on the MAC Mini, and take a SuperDuper image of that to MiniMax external drive volume 2. Then, if the upgrade results in problems I can't resolve immediately, I can simply reimage the MAC Mini from MiniMax volume 1. BUT ...
... I've read that the ML installation creates a "service and support" partition that is different than the startup disk. I'm concerned that I won't be able to reimage the hard disk in the MAC Mini once I upgrade it to ML because of the partitioning changes it introduces on the startup disk. Theoretically, I +should+ be able to use the disk utility on my SL system to repartition the disk in the MAC Mini prior to reimaging it from my backup, but I'm considering the possibility that the new partition may be of a type that the SL disk utility cannot identify, and might therefore be unable to delete or even detect. So I'm hoping someone else has been down this road and can advise me. Even at Firewire 800 speeds, booting from an external disk is still going to be slow, so I want to be able to restore my SL image to the MAC Mini hard disk.
A little background on me. I work for a major disaster recovery provider. I used to have a Mac PRO G5, which I got used, and the first thing I did with it was install a second hard disk, SuperDupe an image from the first disk to the second, and made sure I could boot from the second. THEN I started using and customizing the MAC. I really feel vulnerable with the MAC Mini, since it only has the single internal hard drive - sort of like going out in public dressed only in a long T-shirt. So my whole thing is, I ABSOLUTELY MUST BE ABLE TO PUT THINGS BACK THE WAY THEY WERE before I do the migration to ML.
Obsessive-cumpulsive? Yep. Anal? You got it. That's why I'm in the DR business.

You may have overloaded the port, following the instructions below it should reset:
+1. Shut down the computer.+
+2. Disconnect all devices and all other cables, except the keyboard and mouse cable(s).+
+3. Disconnect the computer from the power outlet and wait for 3 to 5 minutes.+
+4. Plug the computer back in and turn it on.+
+5. Reconnect the device(s) (one at a time if there is more than one) and test. Test with each port if you have more than one.+
http://support.apple.com/kb/HT1317?viewlocale=en_US

What are the symptons of macbook pro hard drive not running fast enough

what are the symptons of the hard drive not running fast enough

Physically the drive will be as fast as any other of its class, and if not then it's experiencing a mechanical issue that should prompt a warning or two in the system, especially if you use a drive management tool like Disk Utility that checks the drive's built-in "S.M.A.R.T." diagnostics.
As for "logical speed," if there are bad blocks on the drive where sectors cannot be read or written to because of a breakdown of the storage medium, then this can result in a program or the entire system crashing or hanging (generally the latter is the case), where it usually pauses for a number of seconds at a time. This is usually accompanied by messages that state "I/O Error" or other similar warning in the OS X Console (in the Applications > Utilities folder).
Beyond this, drive formatting errors such as might happen after a crash or power outage can result in similar hang-like behavior, though this is usually not as distinct of a hanging behavior as is seen with bad blocks.
Finally, if the drive is simply full of files or highly fragmented (not as much of a problem in OS X, but it can happen), then this can reduce access time for reading and writing files, and prevent the system from optimizing the use of RAM, which can result in overall slowdowns. Heavy drive use can also cause similar bottlenecks, but this is ususally only an intermittent issue during a time when you are performing a heavy file transfer or copying process, or other task that occupies access to the drive's index and formatting (e.g., if you check it for errors with Disk Utility, then you may see the system pause or slow down during the check).

Hard drive is running very hard and warm

I recently had a hard drive issue with my mac book pro and basically had to erase everything and then restore all my files from Carbonite. I have now restored all of my files and I think Carbonite is now rebacking those up, but in the mean time my hard drive is running very hard and causing my lap top to get very warm. Is this normal? Is it because of the back up/restore? Or is there something wrong with my fan or hard drive?

Install iStat pro (from the Internet) and open it. It will show you the internal temperatures of your MBP and the fan speeds. Also open Activity Monitor to compare the internal CPU activity with the iStat pro data. Post both for an evaluation.
Since you have suspicions regarding your HDD, make certain that you do have backups. You might open Disk Utility>First Aid and 'Verify Disk'.
Ciao.

I have an older MacBook Pro using 10.4.11 and want to use new operating system to use the latest iLife. Can i install 10.7 on an external hard drive and use the external hard drive to run new system while leaving my old system intact?

I want to use a new version of iLife (for iMovie and iDVD) but am currently running OS 10.4.11, which won't work with the newer iLife programs. Can i install OS 10.6.3 or 10.7 on an external hard drive, boot to that hard drive and work with the new software (installed on the external hard drive) using my MacBook Pro (circa 2005/6) as the engine while leaving my laptop running 104.11 the rest of the time?

Yes, you can use an external drive. To upgrade, however, means:
Purchase Snow Leopard DVD then update Snow Leopard to 10.6.8.
Access the App Store with your Apple ID and purchase and download Lion.
Your computer must meet system requirements:
Snow Leopard General requirements
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Some features require a compatible Internet service provider; fees may apply.
Some features require Apple’s MobileMe service; fees and terms apply.
Lion System Requirements
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Some features require an Apple ID; terms apply.
Obviously, you do not have to upgrade to Lion but can stop at Snow Leopard 10.6.8 which is sufficient for the current versions of iLife apps. Note that iDVD is no longer part of the newest version of iLife. Lion 10.7.2 or later is needed should you wish to use iCloud.

Hi. My iMac hard drive is running Mavericks. I have an old version of Quark Xpress (3.32) which won't run in Mavericks. Can I partition my hard drive and run an older system on one partition, so I can access my Quark? Is that possible?

Hi. My iMac hard drive is running Mavericks. I have an old version of Quark Xpress (3.32) which won't run in Mavericks. Can I partition my hard drive and run an older system on one partition, so I can access my Quark? Is that possible?

Hi ancelau,
QuarkXPress 3 is a Classic Mac OS application, so you need a version of OS X that still supports Classic. I believe 10.4 was the last one.
So if you have an iMac that boots with 10.4, then yes that is possible. I doubt though that newer Macs boot with OS X 10.4.
So why don't you upgrade QuarkXPress 3 to a newer version? I am not just asking that because I want you to spend money with us.
Typically using software that was released almost 20 years ago is just feasible when you keep an environment that was current at the time of release or a few years after, so an older Mac with a operating system present at that time. 20 years in IT is a lot.
So my opinion is that on a new Mac with a brand new operating system you need to use something a bit more current.
How about QuarkXPress 9 (released 3 years ago) or QuarkXPress 10? You are better off with v9, as QuarkXPress 10 only opens v7 and higher (whereas QuarkXPress 9 opens v3.1 and higher).
Or - I am even happy to make an exception - upgrade to 9 and we give you 10 for free? Let me know please.
Thanks
Matthias

What is the best external hard drive to use with a macbook?

I am looking to buy an external hard drive for my macbook pro (2010). I understand that some hard drives have issues when used with Lion.
Does anyone have any suggestions for which is the best to buy?

Any hard drive should work. I don't know of any issues caused by a specific brand of hard drive for working with Lion.
Now as far as the hard drive itself goes there are a few options. Most external drives run at 7200 rpm. Some however still run at 5400 rpm (rpm is the speed of the disk in layman's terms). Faster is better in most cases, however they do produce slightly more sound and run hotter, but not by much.
Then there is also the choice between USB and FireWire (thunderbolt is still to pricy). FireWire runs faster, but is more expensive.
Those are your choices.

I am running Snow Leopard on my iMac and have partitioned my hard drive to run Windows XP. If I upgrade to Yosemite, will I still be able to run XP?

I am running Snow Leopard on my iMac and have partitioned my hard drive to run Windows XP. If I upgrade to Yosemite, will I still be able to run XP?

bobfromnorth battleford wrote:
...Now what happens if I upgrade to Yosemite on either my iMac or my MBPro?
If I install VM Fusion or Parallels, does Windows run all the time? How does that affect computer performance? and how much do I need to worry about hard drive corruption?
Current versions of Fusion and Parallels are compatible with Yosemite. Both are applications which you only run when you want to run Windows within them. As such, there's no effect on computer performance when they're not in use. Like any other software, there is some additional load on your Mac when both Windows and the Mac OS are running together, but any noticeable effect depends on what each is being expected to do and what resources (e.g. available RAM and the number of CPU cores) you can devote to each.
I think there's less chance of HD corruption with a VM than there is with running Windows natively on the Mac in Boot Camp. Consider that, with a VM, you can create Snapshots of the state of your VM at a given time, and then, if something goes wrong (virus, malware, software installations), you can simply restore the Snapshot in a matter of seconds and eliminate the problems in the process. Moreover you can make a backup copy of the entire VM file, and replace a later version if you wish. Also consider that you can assign, say, 100GB of HD space to the VM, but the actual space devoted to the VM is only what's actually used; as more is needed, more is made available and Windows can't tell the difference. So, for example, my Win 7 Pro VM has an 80 GB virtual HD but only takes up 45 GB on my SSD, and that's with XP Mode in VPC installed inside it.
Microsoft no longer supports XP, though virus signature updates are still being issued. But MS has installed a pop-up message about EOL that won't go away (it's installed with KB2934207). Even if you remove that KB in Add and Remove Software, the pop-up continues. But if you have a Snapshot or a backup which is prior to it's original installation, you can skip installing KB2934207, and suppress it's reappearance on a Software Update list.

Can i partition hard drive and run 10.6 on one and 10.4 on other

I have software that only runs under 10.4 on my older Imac. I would like to partition hard drive and run 10.6 on one and 10.4 on the other. Is this possible? Can I get instructions?

Yes.
Just set up the partitions. If you already have a 10.4.x and 10.6.x drives then "clone" them up as bootable backups with a backup utility like Carbon Copy Cloner or Super Duper.
When booting you can hold down the option key to get a list of bootable volumes (select with arrow keys and hit return). You can use Startup Disk for either of them to define the default system to boot from if you don't use the option key technique.
If you don't already have these systems then of course you will have to install them in their respective partitions.
You have to realize of course that these are two distinct systems each with their own version of your login directory.

Can i use an external hard drive in windows to add additional storage after my initial partition is set up. i want to add a 500 GB hard drive to use with my windows. I set windows up in boot camp with a 50 GB partition?

can i use an external hard drive in windows to add additional storage after my initial partition is set up. i want to add a 500 GB external hard drive to use with my windows. I set windows up in boot camp with a 50 GB partition? I now want to add another 500 GB?

Yes. Windows supports external USB drives.

My Mac crashed. I got a new hard drive. I reinstalled Lightroom. Fortunately ircats are stored on an external drive. How do I import all of the old catalogues from external drive into a new LR catalogue. I have done it before. It has just been many years

My Mac crashed. I got a new hard drive. I reinstalled Lightroom. Fortunately ircats are stored on an external drive. How do I import all of the old catalogues from external drive into a new LR catalogue. I have done it before. It has just been many years and I can't recall how.

If you had stored your catalog files on an external drive, then all you have to do is double-click on them to open them and use them.
Or you could move them to the internal drive and double-click on them once the move is completed.
To create a single catalog file from multiple ones, you could use File->Import from Another Catalog

Hard drive constantly running with Lightroom 6

Similar Messages

Maybe you are looking for