Hard drive dead - no Applecare - what to do?

Help! Had iMac more than a year and stupidly didn't buy Applecare. Had 'Invalid Node structure' occur yesterday through Disk Utility and it hasn't started up since. Used DiskWarrior to get all my data off it but now I can't erase and install with my install disks. I am assuming that the hard drive has died (after just over a year, thanks Apple) can anyone advise me as to my best options? I'm guessing it's going to cost me a fortune right? Am in London by the way. Is it best to take it to a Genius Bar or something else? An independent place? Thanks for any advice!

Try booting into Safe Mode:
Starting up in “safe mode” may help you to diagnose problems you’re having with your computer.
To start up in safe mode:
Shut down your computer and wait 10 seconds.
Press the power button.
Immediately after you hear the startup tone, hold down the Shift key.
You should press the Shift key as soon as possible after your hear the startup tone, but not before.
Release the Shift key when you see the gray Apple logo and progress indicator (spinning gear).
To leave safe mode, restart the computer normally without holding down any keys during startup.
Have you tried reinstalling the Mac OS X?
Open Disk Utility, in the Utilities folder in the Applications folder.
Insert your Mac OS X Install disc in your computer’s optical drive or an optical drive connected to your computer, and then restart your computer. When you hear the startup tone, hold down the C key until you see the progress indicator, which looks like a spinning gear.
Follow the onscreen instructions until the menu bar appears with the Utilities menu in it, choose Utilities > Disk Utility, click First Aid, and then click Repair Disk. When it's finished, from the Menu Bar, select Utilities/Startup Disk. In the Startup Disk window select MacintoshHD 10.x.x and click Restart.
Invalid Node Structure doesn't necessarily mean the drive is failing. It would help if you took a little time to learn maintenance for your iMac. Go here for information: http://www.thexlab.com/faqs/maintscripts.html
Carolyn
Message was edited by: Carolyn Samit

Similar Messages

  • Hard Drive Dead? Help!

    Hi, so I recently bought an enclosure for my old HD that died out on me, I suppose? My mac was asleep, then I pressed any button on the computer to wake it up, then I clicked on Mail right away, and it froze for a while.. so I held the power down to restart it. When it restarted, it gave me a white screen with a folder with a question mark on it. I was told my HD was bad. So I changed it, now my mac is up and running. BUT... i need my old files from my old HD. I bought an enclosure, plugged and played.. nothing comes up. How can I get my old files? Please help!!!!

    This one has an outside chance of working. But if it doesn't work, _be warned_, might make the data completely unrecoverable through a professional data rescue service. I've only heard about this and never done it myself. You put it in the freezer. Not sure why this is supposed to work, but it might.
    _Much safer to try Data Rescue first. I would try this only as a last resort._
    For others, try googling hard drive dead freezer and see what you think.
    http://hacknmod.com/hack/how-to-recover-dead-hard-drive-data/
    I can tell you from experience that it in fact DOES work…most of the time. I have managed to recover data 3 times from dead drives, and have also not managed to recover data about the same amount of time. So, it is fair to say that for me, it worked 50% of the time.
    I placed the drive in two zip lock bags expelling as much as air as possible before zip locking both bags. I left it in the freezer for approx. 12 hours with no luck, but after freezing it for extended periods of time, it worked like a charm. It is also important to note that this is generally a one shot deal, if it works, you’re in luck, but you must get as much data as possible from the drive because once it dies, it is rare that you will gain access a second time.
    The 3 times I did manage to get the data back, I exhumed only the data that I absolutely required. In other words, only the data I created or files that I placed on the drive.
    I too, found it hard to believe when I first heard it, but after losing 3 years of tax returns I HAD to try it. Fortunately for me, it worked like a charm.

  • Can I add a second hard drive and if so what cable etc would I need to do so?

    Can I add a second hard drive and if so what cable etc would I need to do so?
    This question was solved.
    View Solution.

    Hi,
    For many 17" (or 17.3") machines such as Envy 17, dv,  Pavilion 17 .... you can add a second HDD (my old loan dv7 has two HDD's and my current loan Envy 17 also has 2 HDD's). You would need the following kit:
        http://www.newmodeus.com/shop/index.php?main_page=product_info&products_id=379
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • My hard drive crashed on my MacBook Pro crashed and I need to get my CS5 up and running on the new hard drive. I copied what I could onto an external hard drive but when I drag and drop I get directions to uninstall but the uninstall folder I have does sa

    my hard drive crashed on my MacBook Pro crashed and I need to get my CS5 up and running on the new hard drive. I copied what I could onto an external hard drive but when I drag and drop I get directions to uninstall but the uninstall folder I have does says it is an alias that is no longer present. I get error 6. I would like to get my software up and running on the laptop again please

    If you subscribed to iTunes match the songs are kept in icloud. If you didn't but you did save the actual iTunes library folder which should include the music, video, etc.  you should be able to just drag this file back to your machine in the same place and when you open iTunes it will give you a chance to identify the iTunes library folder. 
    You can test this to find out if you saved the media files or not and don't need to attach your nano to do it. 
    You are correct that once you connect the nano it will clear the existing files from it and sync it with the new iTunes library. 
    If you don't have the media files i'm not sure if/how to get them back on a windows ipod.  I have everything backed up regularly because of the horror stories I have seen & heard.

  • Hard drive dead/Boot from external hard drive?

    My hard drive failed and I need a new one. For the time being, I'd prefer not to open up my iMac and replace the internal hard drive. I have an external USB hard drive and I cannot install OSX onto this drive (strangely, it takes the first disc but not the second).
    Is it possible to boot and run an iMac G5 from an external hard drive? If so, what is required for hardware and what steps need to be taken?
    If not, what course of action would you recommend?

    It is very easy to boot an iMac from an external drive, but the drive should be a Firewire drive. Get one, then get SuperDuper!, which will enable you to clone your data and system to it. You can then choose the external firewire as your boot drive and operate without any problems.
    Apparently, there are ways to boot from a USB drive, but they are complicated and a firewire drive is very straightforward and fast.
    Let us know how you make out,

  • How do I get finder to recognize my hard drive after pulling my hard drive out without eject...? Is my hard drive dead? I see it in disk utility... Can I get my info back?

    I have a seagte back up plus. I pulled my hard drive out without ejecting it and now finder dosn't find it but I see it in disk utility (although I cant repair permissions) How do I get finder to recognize my hard drive after pulling my hard drive out without eject...? Is my hard drive dead? I see it in disk utility... Can I get my info back?
    Thank you so much for any help

    In Disk Utility you need to see a volume or partition in addition to the drive.
    If all you see is the drive, then when you ejected it you proably corrupted the volume or partition on the drive.
    If that is true then your chances of getting anything back are slim at best.
    About the only thing I know that might work not is to send the disk out to a service for recovery. This is going to cost like $$$$.
    Is the data worth that much?
    Allan

  • I have a pc and have had to format the hard drive 4 times. What happens after the fifth computer is singed on to itunes?

    I have had to format my pc hard drive 4 times.
    What happens if you have to sign a computer on itunes after the fifth time?

    Nothing "happens"
    You failed to deauthorize before reformatting all 4 times?
    If you have reached the limit and need to authorize, then you will need to deauthorize all, then authorize the active computers.

  • Is Hard Drive Dead???

    Hello,
    Thanks for anyone that posts and helps me out here. These forums help alot.
    I have iMac G5 Isight (model before intel) 200GB HD 2.5GB Ram.
    Stopped working and saw blue screen with question mark the other day. uh oh.
    Attempted restart -> not solved
    attempted safe mode -> didnt work just shut down
    attempted single user mode (fsck) -> did not work (catalog file I/O error invalid node structure)
    attempted Disk Utilities off startup disk -> not work (failure on exit error keys out of order)
    sighed.
    bought Disk Warrior (as this helped others w similar issues)
    Attempted DW (fingers crossed) -> message said error "speed reduced by disk malfunction" also could not replace original directory b/c of disk malfunction. Comparison could not be performed and recommended backup and to look at preview.
    everything critical is backed up. no problem.
    everything non critical I dont care about.
    So now, the question is...
    Is my hard drive dead?
    If so, should I reformat it or is it "permanently wounded" and will have PTSD and cause further problems down the road.
    Or, should I bite the bullet and get a brand new Hard Drive??
    thanks so much !!!!
    mike

    Ok.
    now that I have some time going to do erase and install.
    I suppose info is on the apple support website for the exact steps.
    I remember reading somewhere to do settings all to zero?
    I was running Tiger latest version.
    I have a brand new Leopard disks here that I was going to upgrade to before all this happened.
    Should I just boot off the new Leopard disks?
    Or
    Should I boot off Tiger and then upgrade everything afterwards?
    thanks again

  • I have forgotten my administrator password, and there are no hints. I have a Mac OS X Mavericks. When I get to the reset password screen, it has no hard drive to select. What now?

    I have forgotten my administrator password, and there are no hints. I have a Mac OS X Mavericks. When I get to the reset password screen, it has no hard drive to select. What now?

    If you're using FileVault, you first have to unlock the startup volume in Disk Utility. Select it and click the Unlock button in the toolbar. Of course, this is only possible if you know another password to unlock the volume. If you don't, follow instead these instructions.

  • Folder with ? at startup - is my hard drive dead?

    At startup I got a folder with a question mark.
    I started up from MacOS 10.5 DVD, opened disk utility and my hard drive was not shown in the available volumes.
    In System Profiler, under serial-ATA, it says "There was an error while scanning for Serial-ATA devices.
    Tried to reset the PRAM, it did't help.
    Is my hard drive dead, or is there something else for me to try?

    sorry to say but yes your hard drive died....it has just happened to me last week....18mth white macbook. I hope you have everything back up....(I had just got a external hard drive and was going to back up the day it died...sods law!)
    Took it to the Apple store and they replaced the drive....fantastic service...got it back in a day.
    so lesson to all...back up.

  • If I wanted to connect an external hard drive to my iPad, what can I use? Do I have to use the Mac mini??

    If i wanted to connect an external hard drive to my iPad, what can I use? Or would I have to purchase a Mac mini?

    Sorry, I DO NOT RECOMMEND the camera connection kit for what you are asking!
    I was trying to say that as I have the connection kit (bought for camera use so no loss for me)
    I often WISH it could do more.
    So sorry for the confusion.
    The camera connection kit only allows you to send photos and video (that are correctly formatted I might add) to the photos app.
    Other people have had success with it connecting to keyboards, but that us not so useful.

  • Got my big new hard drives in hand - Now, what don't I know?

    Got my big new hard drives in hand - Now what?
    Have 2 old iMacs that I need to upgrade with bigger HDD’s and then upgrade the OS. I am experienced with hard and software upgrades since MacSE days (got all the tutorials marked) but not so much with recent OS10 permutations. Certain that all this has been posted here numerous times, but quite tired of searching for it after a couple hours and have probably unnecessarilly confused and frightened myself in sorting through the scary posts. Perhaps its all in an FAQ at another site?
    1. M9290LL/A G4 iMac 20” 1.25 Ghz 2GB RAM OS10.3.9
    2. M9845LL/A G5 iMac 20” ALS 2.0 Ghz 2GB RAM OS10.4.11
    Presuming that I would clean up the existing internal HDDs, install the new drives (1TB & 500GB) in their appropriate external enclosures, initialize them with the apropriate HFS (know I saw that here somewhere), drag and drop the existing internal HDD onto the new external drive, boot from the external HDD for an appropriate test period (all 5 family users) and only then install the new drives in the iMacs.
    With the files and user settings safely backed up on the old HDDs in the external enclosures, I can safely attempt OS upgrading. Already have family packs of newer OS versions, just never desired the weeklong headache of reconfigging 5 users and the typical screaming lost settings sessions.
    I am not looking at a clean system and software install because of all the user settings. We have a fortune in legacy PowerPC software, some of which never worked right on the G5 with 10.4, but Safari for 10.3 is now very unstable and I have printers with no 10.3 drivers available.
    Questions:
    1.What should I do to clean up the existing HDDs prior to copying over besides running Disk Utility. Didn’t Disk Utility. used to include a de-frag function? Hopefully there is shareware and this doesn’t require a $100 software suite.
    2. Do I need special cloning software due to windows-like traps in OS10 or can I just copy the entire old drive, sludge and all?
    3.What are the ultimate OS10 versions for these machines;
    at what point am I installing lots of Intel code that simply slows these machines down or kludges up the legacy software?
    4. What else did I forget to ask? What would the pros at my local mac shop charge me fortune to do?
    Thanks

    The prevailing answer to my posts is that I should either attempt a clean install and migration over using SD to clone copy the existing internal drive.
    How good is the current migration experience? I've been doing OS upgrades since Mac SE days and never had a clean one in my life. Always lost the whole email folder or all the bookmarks or the address book files or the entire iTunes library or something that resulted in long hours of cursing and frustration. And that was with a single user.
    And I know that these units will boot and be functional with upgrades to 10.4 and/or10.5. Unanswered is whether these computers will work faster or slower and more or less reliably?
    Am not concerned with OS9 apps; have a couple old CRT iMac doorstops if the kids are overcome with a wave of nostalgia for Marathon or Pod Racer.
    Does this or any other site maintain a master list of 10.4 / 10.5 software version compatibilty, or do I have to track down 50 different vendors' current websites?

  • My computer is part of the iMac 1TB Seagate Hard Drive replacement program. What is the best external modem to use in order to back up my files prior to me dropping off my computer.

    My computer is part of the iMac 1TB Seagate Hard Drive replacement program. What is the best external modem to use in order to back up my files prior to me dropping off my computer.

    As Babowa says, get an external disk.  You should have one for normal backups anyway.
    Actually, I'm a strong fan of having multiple backups.  3 copies including the original, 2 different backup formats, and 1 backup off-site.
    And when you have your iMac in for service, if you have just 1 backup at that point in time you have just 1 copy of your data.  I get paranoid about my data.
    But if you are just making 1 backup, I would use SuperDuper (free for a full clone, and extremely good software, as is Carbon Copy Cloner, but it is not free anymore).
    And then I would "Boot" from the clone, to make sure it was a good clone.
    Booted from the clone, I would then use Applications -> Utilities -> Disk Utility to zero the original disk, as suggested by Babowa, so that when they replace the disk, the original disk containing your data is not in the hands of strangers.  A single pass of zeros is more than good enough as an erase, as the chances are no one is going to spend the money needed to try and read the erased data.  It is not like you have any super secret data, just stuff you do not want the casual data theif to get.  You will find the zeroing options under Disk Utility -> Erase -> Security Options
    Just make sure you actually boot from your clone before erasing your original.  And if you are paranoid like me, make 2 backups, then erase the original :-)

  • Gray folder with question mark-- is my hard drive dead?

    I have a white 13 inch MacBook that is about 3 years old and runs on Mac OS X 10.4 (I believe). In the past year, it has been running more and more slowly and programs keep freezing. I was going to ask for more RAM for Christmas, but decided to try a few maintenance steps first. I ran a VirusScan this morning (using McAfee), and when I came back into the room, my computer had frozen past all help. I powered it off with the power button, and now, when I try to start it, a gray screen appears with a question mark. I have tried some of the support steps listed to get it working again such as trying a safe boot (didn't work) and resetting my PRAM (didn't work). Is my hard drive dead? Is there any way I can get my files off the computer? I haven't backed up in about 3 months, and I am very upset because I have a lot of important papers and photos on my HD.
    Thank you..

    Hi corimazz and welcome to Apple Discussions!
    It is possible that your hard drive has kicked the bucket, but the folder with the question mark just shows that the computer cannot find a valid system when it starts up. There are a number of possible reasons for this.
    Do you have the 10.4 install disk? If so, insert it into the optical disk drive, restart the computer and hold down the C key during startup. Once the computer is booted to the install DVD, select your primary language, then look for the utilities menu and from it select "Disk Utility".
    In the Disk Utility, you should see a list of available disks, which we hope will include your hard drive. If the hard drive does not appear in the list, it is dead. If it does show up, select it and click the "Repair Disk" button to see if the problem is being caused by directory damage that can be repaired.
    If the drive is truly dead, you are going to have to decide how much the data from the last three months is worth to you. There are companies that have quite good records of recovering data from even very badly damaged hard drives (sunk in rivers, burned in fires, etc) but they are not cheap.
    In the USA some data recovery options include:
    DriveSavers.com - 800-440-1904
    www.ontrack.com - 800-872-2599
    www.lazarus.com - 800-341-3282
    Once you have the drive out (it's a simple process to remove) it can be replaced with a new one.
    I hate to say it, but keeping backups of important files is vital to safe computing. Both the Leopard and Snow Leopard operating systems make this a much easier process using the "Time Machine" application.
    Best of luck.

  • I have a macbook pro and apple tv2. My problem is that my hard drive is full. What is my best option to empty movies off of my macbook but still access them through atv2?

    I have a macbook pro and apple tv2. My problem is that my hard drive is full. What is my best option to empty movies off of my macbook but still access them through atv2?

    ok. I do have a time capsule but if I move itunes on to it how do I sync my ipods and iphone? Or can I have my Itunes account on both and just move my movies to the time capsule?

Maybe you are looking for

  • A few good time machine questions...

    Mac Users, I had a Macbook Pro that was stolen at the end of June and I am now getting ready to replace it with an iMac. In as much as that is the case, I have some questions about using Time Machine to get my Macbook Pro backup loaded onto the new i

  • Case of the missing template?

    This one drives me nuts. Every few days, I will get the following error on a particular action of a ColdFusion app: (class: cfact_getXYZ2ecfm174795703, method: runPage signature: ()Ljava/lang/Object;) Incompatible object argument for function call It

  • How  to do, multi select drop down in struts

    Hi, I need an example of multi select drop down in struts. i m able to select multiple options by giving multiple="true" , but how can i set all these values to actionForm property to save in to the database. Thanks Naren.

  • What is "InputManager" and why has"Receipts" folder changed?

    1st Topic: Current MacWorld article (May , pg 16-17) tells about the Leap-A trojan horse. However, it refers to a user Library folder named "InputManager" ... no such on my system...I wonder why not? I never use iChat. Is the Virus connected only to

  • GotoAndStop error 1120:Access of undefined property on MC's loaded from .swc

    I am trying to tell a MovieClip added from a .swc library to do simple things like "gotoAndStop()" and all I get is a red X error message 1120: Access of undefined property whenever I do. I can add the MovieClip to the application and position it wit