Hard drive died on my iMac how to retrieve from Time Machine
HI,
My Hard drive died on our iMac (we were on Snow Leopard). We replaced it with a larger Hard drive and the Tech put Lion on it. Sorry if this is a dumb question, but how do I retrieve my entire back up from the Time Capsule.... I search and read something about a Recovery HD? Do I have to have this? Also as noted above, I have the Snow Leopard from when we got teh iMac, but are on Lion now.....
HELP
LOL - I think I have a different/new related problem....
The instrucitons don't say anything about timemachine, but I read somewhere that you need to stop a back up when you get a new computer and want to transfer files.... and that the migration rebuilds the data from the latest successful back up...(thats a little back ground).
Where I am now:
last night the migrations said it would take 29 hrs. No problem....this morning there was not much change in that (considering 8+hours had passed) but did not think much of that either...
I was browsing on the internet and suddenly I get a notifiaiton that the back up failed! oh god I think - surely its not supposed to back up while its migrating....?!?
then a few minutes later the migration window says it has 49 hrs to go...
then a little later it says its finished...so I check the folders - nothing is there....so I start to get a little concerned....and decide to start over.
so I start the migration process and when I get to the window where it asks where to put the stuff from the migration, I assume I am doing the same thing so click the same thing I did last time and it tells me you already have stuff there...wha? but I just checked...there is nothing there - so I know I am doing something wrong and back track - AHA - it has put everything into a user account called XXX. so I decide to log out and see what's happening....sure enough another user account has appeared....and it has the same icon as our old stuff ! yay...!
but heres the rub: we previously only had 1 user account for the whole household, with one password which we did not even have to use....when the hard drive crashed, the repair guy created a user account under MY name, and used our old password. Did not think much of it but when I logged out as ME and tried to log is as US (the old User Account), it would not accept the old password!...So now what....?
Similar Messages
-
I upgraded my macbookpro hard drive to 1 TB then migrated my files from time machine. I'm now locked out of the computer because the password is not the same as my usual one and one that was years old and not retreivable. How do I work around this?
Whether or not you are able to recover the data off the drive yourself will depend on if the drive suffered any impact damage in the crash. You can buy USB SATA or IDE adapters (Intel and almost all G5 use SATA) that will let you connect your hard drive to a computer (like a flash drive) to see if you can recover the data. If the drive has suffered physical damage if may not mount.
If you know someone who has one of these adapters you could try using theirs, otherwise you could buy one but you take the risk of the data on the drive being non recoverable. Regardless, both are much cheaper than $1699!
(Alternatively, if you know of someone with a Mac Pro or PowerMac G5 they may be able to install the drive in their machine and try to boot from or mount it and copy the data off.) -
Lost notes and contact in iTouch cannot find on back-up, how to retrieve from Time Machine
Hi! I reset my iTouch coz it's having some problems after I update my OS. Now I restored everything except my notes and contact. Tried to check from back-up but I cannot find the old back-ups just the new one...can I retrieve it from my Time Machine?...Please help...Thanks!
Hi lllaass,
Thanks for the tip. Sorry, I am not that familiar with computer stuff...I see filenames with combi of letters and numbers...can I know the next step after this? Thanks... -
I had a new hard drive fitted to my imac and restored it from my time machine back up on an external hard drive when I try to open itunes I get this message "the itunes library extras.itdb file is locked, on a locked disk, or you do not have write permission for this file"
To solve this issue all I did was check to ensure that the file permissions were set as described by the earlier posts, followed by simply deleting the iTunes Library Genius.itdb file. Once the file was deleted I was able to open iTunes without difficulty. Note that I am running Windows 8. Hope this helps!
-
how can I get all of my music off of my laptop and onto an external hard drive? I bought a new hard drive for it but it got turned into a Time Machine drive... I want to have all of my music on the external hard drive, and NOT on my macbook pro. Thanks everyone
Hello lramospsych,
To move your iTunes media library to a different location, take a look at the article below to walk you through that process. Make sure that you have everything organized before you move everything over.
iTunes for Mac: Moving your iTunes Media folder
http://support.apple.com/kb/ht1449
Regards,
-Norm G. -
Can I install Aperture on an external Ilmega hard drive attached to my IMac and run Aperture from there to use it with photos on my IMac iPhoto library?
It's usually best to have applications on the boot drive, so I'd turn your idea around: run Aperture from the internal disk and park iPhoto and maybe iTunes libraries on an external - which would free up space on the internal.
-
Why does my iMac (with Mountain Lion) no longer recognize my external hard drive I have used as a back up via Time Machine after the hard drive was accidentally unplugged?
Do you mean the external hard drive is not mounted on the iMac desktop?
Check if Disk Utility sees the drive. Applications / Utilities / Disk Utility. If the external shows up in the left column, select it and click on Mount.
If it does show up this way, I recommend using DU to Repair Disk. -
Do external hard drives mounted on my Mac get backed up by time machine on a time capsule wireless apple external hard disk? How can I see what folders have been actually backed up in the external wireless disk? any help would be appreciated
They can provided you remove them from the Exclude list. Normally, Time Machine does not automatically backup external drives.
-
Had hard drive renewed due to product recall (iMac) backed up complete system on time machine . Had the drive done got mac back tried to reinstall from time machine .The new drive tells me that the space has been taken up but can't find where the file have gone. Need to free up the space that the ghost file take up so I can drag drop from ex drive onto harddrive
Here's the scoop, new friend.....
When you boot into Time Machine you'll get the same OS X Utilities screen as you would if you booted into the Recovery HD. So, from there go into Disk Utilities to erase/format your internal drive. After that's done, back out to the OS X Utilities screen and select the restore option. Just follow the prompts to select the TM back up date you want to restore from and where to restore it to. Pretty straight forward. -
I have a MacBook Pro, 10.10.2 Yosemite. My external hard drive no longer appears on my screen or in Time Machine. I have gone into Disc Utility to repair disc, and get the message: Error: Partition map check failed because no slices were found. I was trying to follow Melophage's instructions by going into "Terminal" and entering "diskutil list; diskutil cs list; mount" and "diskutil info disk2." Then I entered the command "sudo got show disk1." I am sure I have made the problem worse. Can you give me some help? Thank you. blelambert
Last login: Wed Mar 11 19:23:03 on ttys000
~ belambert$ diskutil list
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *251.0 GB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_CoreStorage 250.1 GB disk0s2
3: Apple_Boot Recovery HD 650.0 MB disk0s3
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: Apple_HFS Macintosh HD *249.8 GB disk1
Logical Volume on disk0s2
7A998EAE-68FB-4BAC-BF40-7A31D2806B2C
Unlocked Encrypted
/dev/disk2
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *2.0 TB disk2
1: Microsoft Reserved 134.2 MB disk2s1
~ belambert$ diskutil cs list
CoreStorage logical volume groups (1 found)
|
+-- Logical Volume Group 883A56F4-5559-4872-A8DA-960F99655B63
=========================================================
Name: Macintosh HD
Status: Online
Size: 250140434432 B (250.1 GB)
Free Space: 8921088 B (8.9 MB)
|
+-< Physical Volume 7EDAFA20-FF9A-45FB-BA44-6526BB46C381
| ----------------------------------------------------
| Index: 0
| Disk: disk0s2
| Status: Online
| Size: 250140434432 B (250.1 GB)
|
+-> Logical Volume Family B47B0B40-CBF2-4D02-BFEF-182061AC6F8E
Encryption Status: Unlocked
Encryption Type: AES-XTS
Conversion Status: Complete
Conversion Direction: -none-
Has Encrypted Extents: Yes
Fully Secure: Yes
Passphrase Required: Yes
|
+-> Logical Volume 7A998EAE-68FB-4BAC-BF40-7A31D2806B2C
Disk: disk1
Status: Online
Size (Total): 249779191808 B (249.8 GB)
Conversion Progress: -none-
Revertible: Yes (unlock and decryption required)
LV Name: Macintosh HD
Volume Name: Macintosh HD
Content Hint: Apple_HFS
~ belambert$ mount
/dev/disk1 on / (hfs, local, journaled)
devfs on /dev (devfs, local, nobrowse)
map -hosts on /net (autofs, nosuid, automounted, nobrowse)
map auto_home on /home (autofs, automounted, nobrowse)
localhost:/vB3z604U-dvSpES6320fHq on /Volumes/MobileBackups (mtmfs, nosuid, read-only, nobrowse)
~ belambert$ diskutil info disk2
Device Identifier: disk2
Device Node: /dev/disk2
Part of Whole: disk2
Device / Media Name: WD My Book 111A Media
File System: None
Content (IOContent): GUID_partition_scheme
OS Can Be Installed: No
Media Type: Generic
Protocol: USB
SMART Status: Not Supported
Total Size: 2.0 TB (2000365289472 Bytes) (exactly 3906963456 512-Byte-Units)
Volume Free Space: Not applicable (no file system)
Device Block Size: 512 Bytes
Read-Only Media: No
Read-Only Volume: Not applicable (no file system)
Ejectable: Yes
File System: None
Content (IOContent): GUID_partition_scheme
OS Can Be Installed: No
Media Type: Generic
Protocol: USB
SMART Status: Not Supported
Total Size: 2.0 TB (2000365289472 Bytes) (exactly 3906963456 512-Byte-Units)
Volume Free Space: Not applicable (no file system)
Device Block Size: 512 Bytes
Read-Only Media: No
Read-Only Volume: Not applicable (no file system)
Ejectable: Yes
belambert ttys000 Wed Mar 11 17:34 - 17:39 (00:05)
belambert ttys000 Wed Mar 11 17:33 - 17:34 (00:00)
wtmp begins Sun Mar 8 14:40
~ belambert$ ~ belambert$ diskutil list
-bash: :~: command not found
~ belambert$ /dev/disk0
-bash: /dev/disk0: Permission denied
:~ belambert$ #: TYPE NAME SIZE IDENTIFIER
~ belambert$ 0: GUID_partition_scheme *251.0 GB disk0
-bash: 0:: command not found
:~ belambert$ 1: EFI EFI 209.7 MB disk0s1
-bash: 1:: command not found
~ belambert$ 2: Apple_CoreStorage 250.1 GB disk0s2
-bash: 2:: command not found
~ belambert$ 3: Apple_Boot Recovery HD 650.0 MB disk0s3
-bash: /dev/disk1: Permission denied
~ belambert$ #: TYPE NAME SIZE IDENTIFIER
~ belambert$ 0: Apple_HFS Macintosh HD *249.8 GB disk1
-bash: 0:: command not found
~ belambert$ Logical Volume on disk0s2
-bash: Logical: command not found
~ belambert$ 7A998EAE-68FB-4BAC-BF40-7A31D2806B2C
-bash: 7A998EAE-68FB-4BAC-BF40-7A31D2806B2C: command not found
~ belambert$ Unlocked Encrypted
-bash: Unlocked: command not found
:~ belambert$ /dev/disk2
-bash: /dev/disk2: Permission denied
~ belambert$ #: TYPE NAME SIZE IDENTIFIER
:~ belambert$ 0: GUID_partition_scheme *2.0 TB disk2
-bash: 0:: command not found
~ belambert$ 1: Microsoft Reserved 134.2 MB disk2s1
-bash: 1:: command not found
~ belambert$ ~ belambert$ diskutil cs list
-bash: ~: command not found
~ belambert$ CoreStorage logical volume groups (1 found)
-bash: syntax error near unexpected token `('
~ belambert$ |
-bash: syntax error near unexpected token `|'
~ belambert$ +-- Logical Volume Group 883A56F4-5559-4872-A8DA-960F99655B63
-bash: +--: command not found
~ belambert$ =========================================================
-bash: =========================================================: command not found
~ belambert$ Name: Macintosh HD
-bash: Name:: command not found
~ belambert$
-bash: 3:: command not found
~ belambert$ /dev/disk1
Whole: Yes
Internal: No
OS 9 Drivers: No
Low Level Format: Not supported
:~ belambert$ Last login: Wed Mar 11 19:23:03 on ttys000
~ belambert$ diskutil list
Whole: Yes
Internal: No
OS 9 Drivers: No
Low Level Format: Not supported
~ belambert$ Last login: Wed Mar 11 19:23:03 on ttys000
~ belambert$ diskutil list
Volume Name: Not applicable (no file system)
Mounted: Not applicable (no file system)racergirl,
have you tried resetting your MacBook Pro’s System Management Controller, to see if that makes a difference with the heat? -
Imac won't restore from time machine backup after HD (hard drive) recall replacement
I have an imac bought in 2011, running Snow Leopard. It required an HD replacement due to the 1 TB Seagate recall - the replacement was done by a certified Apple repair station yesterday. Before the guy left he started a backup/restore from my latest time machine backup set. It failed. I attempted it two times and got error messages that it failed and the computer needed to be restarted to try it again. No luck. I called the guy back and he told me to call Apple Care. Not thrilled about that response since the guy had just left my house I did what he told me to do. (A quick sideline here: I recognize that a time machine backup should be no big deal and SHOULD work everytime, but it doesn't. It irks me that Apple is replacing my HD through no fault of mine and yet they don't allow the restore of data to be a "covered" expense in this process - this isn't just because this was an authorized repair guy - the Apple store would have done the same).
Back to the issue. When I called apple care they pretty much had me try the same thing again with an earlier back up set. To my knowledge, it didn't work. I say this because it looked like it was working and when I came back to the imac later, it had restarted and once again booted to the OSX install. (The boot disc is still in the imac). When I tried to boot from another location, one did not show up to boot from so I assumed that the data didn't transfer and it forced another restart. So, I tried something else. I tried to re-install the snow leopard OSX without using the restore function. That appeared to work and then when the machine restarted it asked if I had another mac and I chose the option to get the files/apps/etc. from my time machine backup. The computer chose what I can only assume is the most recent backup set (It chose what I know to be a subfolder that appears under the dated backup folder - Macintosh HD--which btw is confusing seeing as that's always the name of the HD on the imac). I again stepped away from the computer so it could do its thing for two hours. When I returned, I was back to the MAC OSX screen that asks you to choose a language. There were no more options to choose DISK UTILITY or RESTORE FROM BACKUP, etc. When I clicked on English it took me right back into the screen where you say whether you have another Apple that you want to transfer data from. I realized that the imac must have restarted and I assumed maybe it was because the boot disk was still in - except how do you get the disc to eject? I also initially assumed that the backup had somehow failed again and triggered a restart. I tried to choose the option to just set up the machine without transferring data and when I got to the choose a name for your HOME folder message I tried to enter the same name I had it as before and it wouldn't allow me to do so, saying that that name was already in use. I also tried a different name and that didn't work either - got the same message (I assume if it is not the same name that it won't sync up with the time machine data from the backup set). So, I almost tried the "select time machine backup" option again until I looked at my HD space. Clearly, there is space that has been used. HD space was 997 at the start and now it's 636. My initial thought is to somehow get back into the setup area where I can use disc utility and erase the whole thing and then start over but 1) I don't think it's going to work even if I could get back there 2) I have no idea how to get this thing to reboot into that mode 3) I can't get the boot CD out to even try to restart to see if this thing did what it was supposed to, SO NOW I AM TOTALLY STUCK! I have not called Apple Care back because quite frankly they were useless the first time. I have a call into the repair guy but who knows how much help he will be. In the mean time, I have a million things to do and a computer that isn't working - Whoever said Apples never have issues needs to be seriously censored!
A few other notes: I use Time Machine Editor to run my backups weekly. It was set up that way from the get go by an Apple rep who came to my house to get us up and running. Editor should not effect the way that time machine does its work, so I doubt there is relevance but thought it worth mentioning.
One other note is that the Apple Care agent tried to have me do something called a "Source" something or other from the disk utility screen but when she realized that my backup file (shown by date) contained many other sub files (11-27-12/MacintoshHD/MyNamesIMAC/etc.), it was not possible to run this operation - thus we aborted. Sorry I don't remember the name of the process and unfortunately now can't access that option to go find it.
If you can help me, I would be eternally grateful! I am open to having a phone conversation if you are willing to give me your email to mail you my number. I have so much work to do this week and this was the last thing I needed. Did I mention this was supposed to be EASY?
I used to be quite the geek with my PC - still on the learning curve with the mac but not enjoying it. I am fairly tech savvy and I can follow instructions for a step by step solution if you've got one.I got a recall and had the drive replaced. I have retored 3 timesa dn even had apple do the job and it is still not right. I still can't get a simple ghost of the data from time machineback tot he new drive.
This is Apple's explaination as taken from their web page.:
Restoring your entire system from a backup
If you are restoring a backup made by a Mac to the same Mac
With your backup drive connected, start up your Mac from the Recovery system (Command-R at startup) or Mac OS X v10.6 installation disc. Then use the "Restore From Time Machine Backup" utility.
Note: If "You can't restore this backup because it was created by a different model of Mac" appears when restoring a backup that was made on a different Mac, follow the onscreen instructions.
I even posted this information on the community and apple removed it... because they don't like the:
Off-topic or non-technical posts
Non-constructive rants or complaints
But here is my experieince:
Take in 27iMac running 10.6.8, 5-7 days, what a joke, my boss will be happy to pay for a week without working. Finally get, "if you have TM back up, 3 days." Get machine back with 10.6.3, hit the R recovery, click TM back up, runs for 2 hours, reboots, looks great. Box up take back to office... update to install - OH NO, still running 10.6.3. Updates crash with no specific error on install, BUG PROBELM, nothing runs.
Call Apple... after hours, tells me to boot using 10.6.2 disk, wipe, reinstall OS, udate to 10.6.8, THEN do the restore. GREAT! Only thing 10.6.2 DVD won't read... now back on phone... take back to the store, Genius says, he'll ix it just like it was. PROMISES it'll be fixed.
Pick up next day, supposedly, booted to disk, wiped drive, reinstalled, updated to 10.6.8 and THEN did the RIGHT restore... Looks GREAT... apps run and 10.6.8 OS. Back to the office... NOT RUNNING right!!!... fonts messed up, drop box app needs new install, cocktail needs upgrade, Fetch not working, memorized paths gone... back ups locked out of permissions... ***!!
4 hours on phone with apple and still no rsolution - to missing "settings". Seems there are THREE WAYS TO RESTORE (according to apply tech)... Running MIGRATE ASSISTANT and being able to choose your files, including settings, "R" RESTORE after they load a new OS... or NOW WAITING for them to send me a bootable 10.6.3 disk and then boot from disk, w/o installing OS and doing a restore from TM. I think this is done via the disk Utilties application.
So now can't back up without doing a full 400 GB back up since permissons are screwed and possibly destroying any good back ups... can't work, like having hands tied behind back. WAITING for solution! Very upset!!!
I did my first restore just like they said and now an 10 days without proper machine. Just FYI. I thnk I am going to make the store do the tech work so I have somthing to fall back on. -
How to reinstall from time machine onto a new hard drive?
how to reinstall the system from time machine to a new hard drive?
If you are connected to the internet you can do this.
Boot your computer and immediately hold down command, option and R (three keys together). This gets you connected with internet recovery.
See this article for more directions: http://support.apple.com/kb/HT4718.
This process installs an OS on your blank drive. You can then boot from the fresh OS installation and restore from your Time Machine back up.
Note that you cannot boot from a TM back up. -
Can I use the same hard drive to back up my photos and also do Time Machine backups?
I bought a 1T external hard drive today for my MacBookPro with the intentions of backing up my iPhoto library, and then deleting it to make more space on my hard drive.
I also tried and failed to install Time Capsule because my Verizon modem won't let Time Capsule run with it unless I use Time Capsule as my wireless.
That said, I want to back up my computer, and even though I copied my iPhoto library already, I have plenty of space to do a Time Machine backup as well.
Is this something I can do? Please let me know. After two hours on the phone with Apple only to learn Time Capsule was a waste of money, I'm hoping I don't need to buy another external HD yet…If you want to use the drive for both TimeMachine and storage, attach the drive and then open Finder > Applications > Utilities > Disk Utility. Choose the new hard drive from the left sidebar, and then in the main panel choose Partition.
Choose the number of partitions to be two. Click the first partition and change the size if you do not want the default half of the drive. Name the partition (such as Backups), then accept the default format Mac OS X Extended (Journaled) and the partition table as GUID. Click Apply and confirm you want to erase the drive.
Then do the same for the second partition, but of course, give it a different name.
When finished Quit Disk Utility.
Turn ON TimeMachine in System Preferences and direct it to your backup partition. -
How to restore from Time Machine onto an external drive
Hi all,
I am a backup freak, and I don't feel entirely safe with Time Machine taking care of backing up my system unless I can test every now and then that I would be able to do a full restore. I've had problems in the past with .Mac/MobileMe's Backup.app, which would not be able to restore from an otherwise apparently successful backup, for one reason or another.
So, is there a way to test a full restore from Time Machine onto an external hard drive?
Thanks for your adviceAllamistakeo wrote:
Hi all,
I am a backup freak, and I don't feel entirely safe with Time Machine taking care of backing up my system unless I can test every now and then that I would be able to do a full restore. I've had problems in the past with .Mac/MobileMe's Backup.app, which would not be able to restore from an otherwise apparently successful backup, for one reason or another.
So, is there a way to test a full restore from Time Machine onto an external hard drive?
of course. connect an external, boot from the snow leopard DVD and choose "restore system from backup" from the utilities menu. follow the instructions and choose the external drive as the restore destination. make sure it's properly formatted. it should be formatted mac os extended with GUID partition scheme.
also, you might want to consider doing secondary backups in addition to TM by making a bootable clone on another external drive. use CCCloner or Superduper for such backups.
Thanks for your advice -
How to restore from Time Machine after HD change?
Hi I am having my hard drive replaced due to the issue with the Seagate hard drives. I have a Lacie NAS which is working with Time Machine. I wanted to know, once I have my iMac back with a new hard drive, how do I restore everything from Time Machine?
ThanksHave a look at this thread I posted in earlier and the various links in Pondini's excellent Time Machine resource I linked to:
https://discussions.apple.com/message/20367932#20367932
Maybe you are looking for
-
Please help
-
How Can I disable page scrolling when creating an interactive PDF using InDesign?
I'm attempting to create an interactive PDF portfolio with links from the homepage to gallery pages and projects etc, but it seems useless if I can't stop the PDF pages from scrolling? Can anyone help? I have InDesign CS5.5 and Adobe Acrobat Pro. Tha
-
Malformed Password error retured by AAA on password reset
I have setup AAA with LDAP on my Windows 2003 AD servers. Normal authentication seems to be working fine, however if I set a user to require a password change, I get a Malformed Password error in the logs. I am using this with the Clientless SSL port
-
Flags won't sync with iPhoto on the iPad2 to the iMac
The Flag feature in iPhoto doesn't sync either way between the iPad2 and the iMac. I am running iOS5.1 on the iPad2.
-
Mail is really wonky - some msgs. "gone" after update to 10.4.11
I just updated to 10.4.11, and before I could reboot the computer Mail crashed. On restart of the program (it asked me whether I wanted to use the old settings or new ones, I foolishly clicked on new settings which is where the problem may have begun