Hard drive disappears and Disk Utility is not finding it

I woke my computer up from sleep this morning, launched Final Cut Pro and it threw me an error. It said there was a permissions error for one of the volumes FCP was using, then my hard drive disappeared.
It does not show up in Disk Utility, nor does it appear in System Profiler.
I took the SATA drive out of my Mac Pro and tried to mount it using an external SATA to USB dock. It spins and sounds ok, but still won't mount.
Anything I can do to revive this drive?

all of this pretty clearly indicates that the drive is dead. get a new one.

Similar Messages

  • Drive visible in Disk Utility but not Finder.  Why?

    I have a PowerMac G4 (mirrored drive doors) with 4 hard drives installed. 3 of the drives are set-up in a striped RAID array and the other one is my boot drive with two partitions. One one partition, I have OS X 10.3 and I can see the RAID drive fine. On the other partition, I fresh installed 10.4 but the drive does not appear on the desktop. Strangly, I can see the drive in Disk Utility and it shows me the mount point. I can even unmount and remount it but it still does not show up in the Finder. I had 10.4 server installed prior to the fresh 10.4 (not server) install and that showed it fine. I tried to see the drive in Terminal but also does not appear. Why does my drive appear in Disk Utility but not the Finder?

    BDAqua wrote:
    Yes, it needs the path to the drive...
    :-/ Yes, I got the command in completely with the path to the drive like it states in the other post. I have no idea why it didn't recognize the command as I'm not as familiar with UNIX/Linux commands as I'd like to be.
    Anyways... I found the cause of the problem (incase it happens to anyone else). Here's what happened:
    The ownership on the root of my RAID volume was set to be read/write for me (under my proper username) and no access for anyone else including Admin. When I installed a fresh OS, the default user was Admin (who had no access under the previous OS). If I would've taken the time to set-up my proper account (with the same owner name as my previous OS) then it would've been visible again but since I didn't see it under the default Admin account, I stopped there to troubleshoot. Another way to make it visible was just to change the access privileges from my previous OS to be read/write for other users (or at least Admin). I would think that checking the box for "Ignore ownership on this volume" would've remedied that but for whatever reason, it didn't.
    Thank you for all your help. I did learn a little even if it wasn't the direct solution. Now if only I could get Disk Utility to restore my old image without giving me crazy errors... But that's another issue altogether. ;-D

  • Lacie Hard Drive Appears In Disk Utility But Not Desktop

    Hello,
    My Lacie hard drive was working fine till yesterday. It will appear in the disk utility but not on the desktop? I'm using a G4 with mac os 10.3.9. I have tried disconnecting the power and rebooting to no avail.
    Any help?
    Thank you.

    Welcome to the forum.
    Have a look at the comments on THIS THREAD. Perhaps there's something there that will help.

  • Hard Drive Reads in Disk Utility but not in Finder

    I have a Seagate FreeAgent hard drive that is configured to NTFS. I use software to read and write to this on my macbook pro. I have plugged my hard drive into my macbook this morning and it will only read in Disk Utility, and not show up at all in Finder. I have plugged it into another macbook and have the same thing. Tried to do disk repair and it said it was repaired and operating normally, but still not opening in Finder. I also tried it on a Dell running XP and same thing, doesn't open as a folder but shows as operating normally in the XP's disk utility equivalent. I have tried finding an answer elsewhere but can't come up with anything. Besides taking it for data recovery, is there anything else I can do or try to fix without compromising the data?
    Message was edited by: jazmyn96

    You might get more help were you to post in something like the MacBook or OS X forum. This forum is for OS 9, an archived Apple Macintosh operating system.
    That said, it sounds like your drive might be dead. When you say that you can see it in Disk Utility, you mean that it shows up in the column on the left? When you repair it, can you hear the drive spinning up?
    Can you try making an image of the drive to see what happens?

  • Hard drive clicking and disk utility can't repair

    I have an iBook G3 that recently started making a clicking noise from the left side of the computer. At the same time it froze up and now it won't start up. I tried to start it in safe mode and it didn't work. I was able to start the OS X install disc and start the disc utility, but I get an error: Invalid Sibling Link, Volume Check Failed.
    Does anyone know if there is anything else I can do to try to repair the hard drive myself? If not, how do I find someone reputable to get the data off of the drive (no I didn't back it up... ever) and install a new drive?
    Thanks for any suggestions!

    Hi, and welcome to Apple Discussions.
    You could buy DiskWarrior and see if it can repair your hard drive. It can often repair a hard drive when Apple's own Disk Utility cannot. No guarantees that it can do it for yours, but DiskWarrior has saved my hard drive several times.
    If you are able to get it up and running, be sure to back things up right away.

  • External Hard Drive showing in Disk Utility - but not desktop.

    A little background:
    Yesterday, I moved my shelf where I have my modem, Airport Extreme, Airport Express and an external HD connected to the extreme to be a wireless HD for all users to access. Everything worked great - no problems whatsoever.
    Problem: I have reconnected everything exactly as it was and reconfigured it as it was and now the external HD is having issues. When connected to the extreme, I can see it in the airport utility, but cannot gain access to it in that way. When I connect directly to my macbook, it is recognized by the disk utility, but does not appear on the desktop.
    I don't know if this may have caused the problem, but I carelessly, unplugged the power bar for which all the above mentioned hardware plugs into when moving the shelf. Now, everything works as it did, except I can't get the express to show up once it is configured (but this isn't surprising as I had to fight with it the first time I configured it - not uncommon I am told), and the HD is no longer accessible via the network, or when directly connected to my macbook.
    Help! According to the utilities, the data is still on the disk, I just can't access it in any way.

    From the Disk Utility, select the drive and click on the Repair Disk(not Repair Permissions) button. If the Disk Utility finds a problem it can't fix, DiskWarrior or TechTool Pro will likely succeed.
    (24355)

  • Hard drive visible in Disk Utility but not on desktop

    I have an external hard drive, one of a RAID 1 mirrored pair which I have been connecting to my computer with FW800. I was having problems as was using one of them for a while, which solved them. When I hooked them both up to my computer, they showed up as two separate drives rather than one drive like before (since they were mirrored). Now the one I have been using does not appear on the desktop but I can see it in Disk Utility, but can't fix permissions with it or even verify it. I've tried connecting with USB instead of FW800 but that has no effect.

    already checked, there is a problem with my computer or with the external hard drive. Now a new esata array is giving me problems so I am starting to think there is something wrong with the computer.

  • I am connected to time capsule via wi-fi but air port says not connected and disk utility does not see it

    I am connected to time capsule via wi-fi but air port says not connected and disk utility does not see it. I had it connected via ethernet and it still did not see it. Then i disconncectd it from ethernet and did the Wi-fi connection and am able to post this message but air port still does not see it.

    Disk Utility will not "see" the Time Capsule, so no need to waste any more time on that issue.
    but air port still does not see it.
    Not sure what you mean by "air port" here.

  • I have just had my hard drive replaced and now I can.t find Air Port to get wi fi

    I have just had my hard drive replaced and now I can't find Air Port for my wi fi

    Go to your Applications folder>Utilities>AirportUtility.app>and there set up your Airport service.  Then return to your Applications folder>Sytem Preferences>Network> and there turn on the WiFi on your iMac.
    Hope this helps

  • Hard drive absent in disk utility - want to erase and reinstall MacOS

    Hi there. Any help would be most gratefully received.
    I have a Power Mac G5 Dual 2Ghz with 2GB RAM, one internal HDD (250GB serial ATA 7200rpm - the original one), two external HDDs and a Philips 170B display, running (or not) MacOS 10.39.
    It was working fine yesterday but on startup this morning it hung for a while on the grey Apple logo and progress "clock" then froze on a blue screen.
    I tried removing all cables except display and keyboard/mouse and restarted a few times but to no avail.
    I tried entering safe mode but it wouldn't work. Upon subsequent attempts at startup it took me (instead of the blue screen) to the flashing question mark/finder folder screen.
    I then booted from my install CD and tried to run Disk Utility to repair the disk. Disk Utility recognised the disk and allowed me to select it. But when I tried to verify it, it failed and told me to repair. When I tried to repair it told me "invalid b-tree node size".
    I then tried running the Apple Hardware Test CD. It found no faults at all in the full test of the system.
    All of my data is stored on my external HDDs so my next thought was to erase the internal HDD and reinstall my software. (I use the Mac solely for Video editing and the only applications I have installed - in addition to all the basics - are the Apple Production Suite.)
    However, this time when I booted from the install CD, Disk Utility would not recognise the internal HDD. The only thing I had done since it had recognised it the last time was to run the Hardware tests. In addition, since running the hardware tests, the HDD started making a strange noise whenever the Mac was on - like clicking with almost beep-like access noises.
    The last time I tried restarting and booting into Disk Utility, the clicking began again and then eventually stopped. But still no evidence of the drive in Disk Utility.
    Soooooooooo. I don't need to save any data on the hard drive. I have all my software and OS discs. I just want to wipe the drive and start afresh (assuming this is the best course of action?). But I am unable to do so because of this new development in my attempts to fix the problem: the unrecognised hard drive (coupled with the strange noises).
    If you have any ideas, please do get in touch. I'm pretty broke at the minute and I'm trying to find a solution without having to purchase a new drive. Obviously, if this is the only solution, then I'll have to bear that cost. But since it has recognised the disk just a few steps before, I'm hoping there's a way back.
    Yours in optimism

    I am not sure about battery, I still use G4 MDD which is unplugged for months, was always off at night (UPS was off) and still works.
    But I would always use both SATA drive bays, and I think you need to invest in one or two new drives.
    For now, try disconnecting your drive and see if you can boot from external drive and CD/DVD.
    Also see if you can get into Open Firmware.
    Resetting PMU would also be worth while when you get in to disconnect your hard drive (I think 3 yrs is more than enough for any OEM drive, too).
    http://www.apple.com/support/powermac/

  • "revert" deleted hard drive name in disk utility HELP!!

    I booted my wifes macbook pro 10.4.11 in target mode and connected it to my computer, macbook pro 10.5.6 and went into my disk utility to create a partition in the other computer. I used my disk utility from 10.5.6 because for some reason it got erased from the 10.4.11
    so I started to do 2 partitions. It said there was not enough room so I clicked on "revert" and for some reason the name of the "macintosh hd" disappeared and I ejected the computer in target mode. Then when I tried to start it up, it just kept flashing a folder with a question mark. I booted again in target mode but still no "indented" "macintosh hd". it seems like it came unmounted maybe?
    I have tried starting from x key, resetting pram, trying to load from install disc (which gets to the point where it asks where to install the OS and no HD shows up to choose) and even taking it to the apple store where they said the HD is damaged and/or corrupt. Before trying to reclaim the files, if I can, I wanted to see if anyone had this same issue and if it was solvable. I cant believe that I hit "revert" and it erased my hard drive name and it automatically made my HD corrupt or damaged?
    PLEASE help anyone!
    or if this is a lost cause, is there a good file recovery program where I can get my WIFES files back! Yeah, I am in trouble.
    Thanks!

    If anything can be recovered at all, you should quit using the computer asap. The more you use it the more OSX will write over those spots where the files were.
    Data Rescue II...
    http://www.prosofteng.com/products/data_rescue.php
    (Has a Free Demo to see if it could or not, but you'll need another drive to recover to).
    Or FileSalvage...
    http://www.subrosasoft.com/OSXSoftware/index.php?%20mainpage=product_info&productsid=1
    to recover what you can.
    BUT, you'll need that other Mac with this one in FW Target Mode
    BTW, don't use Leopards Disk Utility to do anything to a Tiger Hard Drive.

  • Disk Images will not mount and Disk Utility will not runru

    I am having some major problems with Disk Utility, Disk Images, and software update. First, Disk utility will not open or run. When I double-click the application icon, nothing happens, no message, nothing. I am running OSX 10.4.11. I have deleted diskutility prefs. I am able to run Disk Utility from the Startup DVD of Tiger. On first run, it verified and repaired permissions. I run verify and repair permissions several more times from Startup DVD and everything is fine. But Disk Utility on my startup HD will not work. Similary, NONE of my disk images will mount. No matter what Disk Image i try to mount, nothing will. And I cannot use Disk utility to mount them! So, no matter what I download, no images will mount. And thirdly, when I try to run software update, it will not work. I do get a message: it says, "Could not load Software Update." Finally, i tried to download Onyx to delete log files, etc.. but again, the disk image will not mount. I was able to install a dashboard widget called "maintidget" and was successful in running the daily, weekly, and monthly maintenance tasks. Can anyone help? Everything else works fine!!! All apps! Safari, Mail, iTunes, MS Office, everything works fine. Thanks for ANY help!

    Previously, I had run verify permissions, repair permissions multiple times(from startup DVD) - no probems found. Deleted disk utility prefs. Run the maintenance taskes (daily, weekly, monthly). Nothing worked. But, I forget to check the drive for problems. So I ran disk scan. It found "invalid node" and repair disk could not do it. So, do I erase and do a fresh install or get DiskWarrior? I am running Leopard so I do not have Time Machine but I have backed up my documents, iTunes Library, iPhoto Library, etc... Another thing I found out the hardway is to sync all your bookmarks, mail settings and messages, etc... with .mac if you have an account. Any more suggetions?

  • IPhoto and Disk Utility Will Not Launch - Please Help!!

    Hello!
    The last week I have not been able to launch iPhoto. When I tried to troubleshoot last night by going through solutions on the forums, I realized that I couldn't launch Disk Utility either. I have since run the Disk Utility from the Mac OS Panther Install Disk, gone through several troubleshooting procedures (font cleanups, cache cleanups, hard-disk space cleanups, etc.) but with no success.
    The last troubleshooting doc I went through recommended checking Console for a log of problems, and sure enough, the only comments in the Console Log were related to iPhoto and Disk Utility. Can someone please advise regarding the below comments and how to fix??
    Thank you SO much!
    -Sarah
    Mac OS X Version 10.3.9 (Build 7W98)
    2006-08-13 10:31:53 -0600
    dyld: /Applications/iPhoto.app/Contents/MacOS/iPhoto truncated or malformed library: /System/Library/Frameworks/DiscRecordingUI.framework/Versions/A/DiscRecordingUI (file is empty)
    dyld: /Applications/iPhoto.app/Contents/MacOS/iPhoto truncated or malformed library: /System/Library/Frameworks/DiscRecordingUI.framework/Versions/A/DiscRecordingUI (file is empty)
    dyld: /Applications/Utilities/Disk Utility.app/Contents/MacOS/Disk Utility truncated or malformed library: /System/Library/Frameworks/DiscRecordingUI.framework/Versions/A/DiscRecordingUI (file is empty)

    Hi - I appreciate the assistance, but archiving and reinstalling does not help me determine why this happened, how to prevent it from happening again, and is a fairly elaborate process for something that might have a quick fix (what I was hoping for). I was trying to leave that as a last resort.
    Also, I have no idea what Onyx is - would you elaborate?
    Thank you!

  • My mac had to have its hard drive replaced and now iPhoto is not on my computer. how do i get it back with no charge?

    my macbook pro's hard drive crashed and a new one had to be put in. due to these circumstances, i lost everything. when i bought my computer, iphoto was already installed and i did not have to pay for it. i am wondering if there is a way i can reinstall it with no charge since it was not my error that cause the computer to malfunction.

    You will find all the iLife applications are in the Optional Software installer folder on the OS X installer DVDs that came with your computer when it was new.

  • IPhoto 06 and Disk Utility will not launch

    I have a friend who has upgraded to iLife 06 on her G4 Mirrored Doors and when she tries to launch iPhoto 06 it bounces in the dock and then stops. iWeb will launch, as well as iDVD and iMovieHD, but Disk Utility will not. I have used the Tiger Install DVD to repair permissions as well as run FSCK -fy in single user mode. Nothing seems to fix these problems. Any advice will be appreciated.
    TIA.
    Lance
    PowerBook G4 15 Al   Mac OS X (10.4.8)  

    Since Disk Utility won't run I'd reinstall the 10.4.8 COMBO updater. Then see if DU will launch. If so repair disk permissions with it. Then see if iPhoto will launch. If not then reinstall iPhoto from the iLife disks, update to 6.0.4 with System update, and then download and run the 6.0.5 updater (it will only run on 6.0.4). Then run Disk Utility again and repair disk permissions.
    Before reinstalling however, all files with "iPhoto" in the file name that reside in the HD/Library/Receipts folder must be deleted along with the current application.

Maybe you are looking for