Hard Drive failed both postive read and smart short self test

Hello, my Lenovo Think Pad's Hard Drive failed both targeted read  test (error code WHD20-HJF) and the smart self test (error code WHD16-KPY). I admit that I'm an older user and I have no idea what this means and what is the possible fix for it.
I am open to all suggestions;
THANKS,
Octavious ONeal

Hi, Octavious
When the hard drive fails those tests, it's an indication that the drive is dying. It's recommended to back up any valuble data on the hard drive and then replace it soon. The drive may still work for a little while, but it will likely stop working sometime soon.
Hope it helps,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

Similar Messages

  • My hard drive failed, has been replaced, and now it won't boot to CD.

    My hard drive failed, has been replaced, and now it won't boot to CD to install the OS package. It would boot for a while, get through the first cd of install and would stop randomly in the next install. I found out that the installation disk was cracked so I went out and purchased the Mac Box Set which includes Mac OS X Snow Leopard, iLife '09 and iWork '09 under advisement from an associate at the local apple store. Now, I try installing this new OS disk and all I get is the apple logo without a spinning wheel for about 10 minutes and the computer restarts and does it again. I have tried booting from disk, holding c while starting up, and in safemode, holding shift while booting. Please help save my poor poor macbook!!!

    These errors look like corrupt or missing files that leopard requires. It sound like you need to start from scratch: format your drive, reload Leopard. I realize that this is probably what you are trying to do.
    If you cannot boot from install DVD and cannot successfully get into Safemode or Single usermode (due to a corrupt or incomplete install) then you will need another computer to assist you.
    If you can get it into Target Disk Mode and have another Mac you could plug it into that Mac and reformat it.
    If it will not go into TDM then you may need to take it out and put it into an external enclosure to plug into another Mac to format it.

  • How can I use an external hard drive to both back up and free up storage on my macbook?

    I've used a hard drive to back up my 2012 Macbook Pro via Time Machine, but I'm not sure how to use it as external storage to move things like video and music off of my Mac to free up memory and then how to move the same things from the hard drive on to other devices like my iPad or iPhone.  For instance, I have a ton of movies and would like to store most of them on an external hard drive so that they aren't taking up all of my memory on my Mac, but want to be able to move them easily back onto my phone or iPad.  Also, can I use the same hard drive to both back up my computer and use it for external storage?  If so, how do I do that?

    Always use two drives for this: one for backup; the other for storage. Don't mix the two uses on one drive. There's a greater risk of data lost without that redundancy.
    If you plan to backup using Time Machine, then be sure the backup drive's capacity is at least twice that of the drive you are backing up.

  • Trying to use portable hard drive on both my Mac and PC...

    I just purchased a Toshiba Canvio Plus 1TB portable hard drive for my three Macs. Out of the box, I need to format the drive for Mac, which is fine, but I just found out that my fiance would also like to use it for her work computer, which is a PC running Windows XP. I need your help in finding out how to read and write to this portable drive from both a Mac and PC.
    I thought about partitioning the drive but that wouldn't work because we want both systems to access the same data. After doing a few Google searches, I thought formatting the drive to a FAT32 would be the answer but I read that file sizes can't exceed 4GB. Since I purchased this specifically to complement my new HD camcorder, a 4GB file size limit will not work for us.
    One last thing, since she has a company-issued PC, I'm pretty sure she's unable to install third party software and/or drivers. So please factor that in.
    What would be our best solution? Thank you so much for all your help.
    Message was edited by: madeinguam

    madeinguam wrote:
    What would be our best solution?
    two possible ways:
    (a) format the drive for Mac and install MacDrive on the winsloth machine(s)
    (b) format the drive NTFS and install the _*NTFS 3G*_ driver on the Mac(s)
    JGG

  • External hard drive for both a PPC and Intel Mac?

    I have 2 LaCie Hard Drives (500GB & 750GB) that I'd like to use for backing up my 2 laptops and for storing photo and music files.
    When I got the MacBook Pro, I partitioned the 500GB drive into 3 volumes and used SuperDuper! to make "bootable" copies of the MBP on one volume, theiBook on one volume, and put photo files on the third. I don't know/can't remember how I dealt with the directions below from Disk Utility and I fear I may have done the impossible or at least done the wrong thing.
    "If you will use a volume as a Mac OS X startup disk, click Options and choose the appropriate partition scheme. To use a volume to start up an Intel-based Mac, choose the GUID partition scheme. To use a volume to start up a PowerPC-based Mac, choose the Apple partition scheme."
    As I ask these questions, I find myself getting tongue-tied so please bear with me and read on...
    #1 - Is it *even possible* to do what I want and have the bootable copies of both of these laptops on the same HD since one is PPC and the other Intel? If the answer if yes, it's OK then the rest of this is moot.
    #2 - I can easily delete one or the other laptop backup from the 500 LaCie and put it on the virgin 750 and partiton it - problem is, is there a way to know how I partitioned the 500 HD so I won't have to redo it -I don't want to have to recopy the thousands of photo files already on the HD. If I knew how it was partitioned - Intel or PPC - I could just delete the appropriate laptop and move it to the other LaCie, assuming I have to.
    #3 - And, is it possible to use a drive that has been partitioned for PPC or Intel with the other type computer - will I be able to access the jpg photo files from both the MBP and my G4 both of which are Tiger no matter which way the HD is partitioned? Now I as able to do this, but as I said, I don't remember which way I partitioned the HD - all I remember is that I did choose to include OS 9 drivers since I still use Classic and OS 9 on the G4. ( I have yet another LaCie that I use exclusively to back up my G4 and it is not part of this issue)
    Mrs H

    So "To use a volume to start up a PowerPC-based Mac, choose the Apple partition scheme." really means it will work for my Intel MBP too?
    Yes.
    Is there a way to tell if that is what I already choose?
    Select the existing drive in the Disk Utility and find the Partition Map Scheme text at the bottom of the window.
    (34529)

  • How can I use single hard drive for both Mac OS and Windows without changing the formats and reformatting?

    I have a windows PC and a Macbook Air and a 1TB external hard drive. They said in order to transfer large files into the hard drive you have to change the format of your hard drive (which would be from MS-DOS to Mac Os extended) so how can I use my external hard drive on my windows PC without reformatting its files? Please heeeelp 

    Natively Windows can read and write to NTFS, FAT32, and exFAT while the Mac can read and write to FAT32, exFAT, and MacOS Extended.
    Option 1: You can purchase driver software for Windows to allow it to read and write Mac's MacOS Extended or you can purchase a driver to allow the Mac to read and write to NTFS.
    Option 2: you can format the hard drive for exFAT and use it with both Windows and the Mac without purchasing any special drivers. (Obviously the 4GB file size limit is why you don't want to use FAT32)

  • How can I use one external hard drive for both Time Machine and iPhoto Library?

    I have been using a 1 TG LaCie external hard drive for Time Machine backups.  My (older) Mac has 160 GB and is almost full.  I would like to move my iPhoto Library to the external hard drive, but I've heard Time Machine doesn't share one space well.  Should I
    1.  create another partition (but will this erase what I've already saved) with Disk Utility?  *I am running Snow Leopard*
    2.  create another volume to use for iPhoto, and if so, should the two volumes be of equal size?
    3.  leave it with one partition and move the iPhoto Library to the same partition with Time Machine back ups?
    I know I don't need the entire 1 TG for back up of 160 GBs.  Please advise the best path to take.  Thank you!

    You are getting incorrect information from your ASP. If you look at drive specifications the heat generated is no different for high vs low capacity drives.
    I have upgraded the internal drive in my iMac 2007 with a 3TB Hitachi drive without any heat issues or other problems.
    Larger hard drives have higher density platters so to access any given amount data the drives travel a shorter distance. Higher capacity drives should therefore run cooler than lower density drives because the drive spends less time spinning to access data.

  • Viewing External Hard Drives on both PC Mac and in Parallels.

    If someone could give me a clear answer on how to use an external hard drive b/w my Mac, Parallels and my work computer (PC) that would be most helpful.
    I bought a external hard drive overseas and was having no problems with it on a PC but when i bought this Mac Book Pro i could only view and retrieve data and not write to it. I then partitioned it in the disk utility (master boot record) and am now unable to see the drive on a PC where all my files are, but it works perfect with the Mac.
    I figured it was my dodgy hard drive from indonesia so i just bought a LaCie and i can't see it in the Parallels where i need to use a PC program even when i disconnect and connect when parallels are loaded. I haven't tried it on my work PC yet.
    Is it possible to use a EHD between all 3 (Mac, Parallels and a PC)? if so how? and if not what are my options to maximizing the ability to access data on all three?
    Thanks would appreciate any insight.
    Mac Book Pro   Mac OS X (10.4.9)  

    Hi and welcome to Discussions,
    the reason why your MBP could not write to the HD was, because it was most likely formated using NTFS as file system, which OSX can read from, but not write to.
    The best file system for all three is FAT32, which is read- and writeable for all three.
    Two problems with FAT32:
    1. single files can not be bigger in size as 4GB
    2. Windows can not format partitions with FAT32, that are bigger than 32GB.
    The first limitation can not be overcome with FAT32.
    The second can be overcome, when using Disc Utility from OSX with MBR as partititon scheme and MS-DOS (OSX name for FAT) as file system.
    Or you can use command-line program to do this with your PC: http://www.heise.de/software/download/h2format/40825
    (Sorry, link is in german).
    That way all three should be able to see and use the external HD.
    Although it is a fact that Parallels can be picky sometimes with USB-connected drives, but with the newer versions of it, this problem has become less evident.
    And since up to now Parallels does not support FireWire, you must USB with it.
    Regards
    Stefan

  • Want to partition a new External Hard drive for both pc and mac

    Hello!
    I am going to partition a new Seagate external hard drive for both my pc and mac.  What format do I choose for the PC partition?  MS-DOS (FAT), ExFAT, or Free Space.
    Thank you!
    Nikki

    If I may suggest:
    Drive Preparation
    1.  Open Disk Utility in your Utilities folder.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    7. After formatting has completed select the main entry for the new drive (mfgr.'s ID) then click on the Partition tab in the DU main window. Click on the large partition rectangle then click on the Add [+] button. The partition should divide into two equal volumes. Resize as you prefer. Select the second or bottom volume to use on the PC. Set the format type to ExFat, then click on the Apply button. Wait for the two volumes to finish mounting on the Desktop.

  • I need a central hard drive for both MAC and PC to read and write files interactively. Would the time capsule work?

    I've just purchased a new mac and realised that I can not write directly to my external harddrive that I use with my PC.
    I need a drive that both my Mac and PC can work with. Could someone tell me what the best solution for this is??
    Many thanks in advance.
    Stuart

    Install a tool such as the NTFS-3G drivers on the Mac.
    (60694)

  • RAM or Hard Drive failing  ... or both?

    Early 2009 24” iMac, iMac model iMac9,1, Build 13F1066, 2.66 GHz, Intel Core Duo running with 2 x 4GB 1067 MHz DDR3 RAM (a matched pair installed 2 years ago to add RAM) running OS X 10.9.5. I have several USB and one Firewire external hard drives to hold iPhoto/iTunes and various back ups.
    Of late it has had numerous and frequent odd errors. Mid-operation crashes, application crashes, inability to boot following a crash, apparent corruption of external hard drives which can now only be read (but not written to) etc. Fault reports were varied; some kernel panics some crashed threads e.g com.apple.main-thread. Disk Utility often unable to repair so re-format and re-install required.
    Before effecting a repair I had to establish what was causing these seemingly unrelated issues.
    SMART Utility first showed the hard drive as failing [item 5 - Reallocated Sector Count 0x0033 199 (threshold 140) Pre-fail, Update Always, Failed Never, Raw value 6 & item 196 Reallocated Event Count 0x0032 199 (threshold 199), Old age, Raw value 1]. However, I have successfully re-formatted it and it still shows this (which I presume is fine as the bad blocks are still present). Other drives it can report on were reporting ok.
    That said, more recently it also now shows one of the USB connected external hard drives as Failed [item 184 - End-to-End Errors  0x0032 99 (threshold 99) Old age, Update Always, Failing Now, Raw Value 1].
    Whilst researching what hard drive I could replace mine with (same manufacturer [WDC] to avoid heat sensor issues, larger [why not?], jumper settings to downspeed to 3Gb/s I thought I'd run an Apple Hardware Test (AHT).
    So yesterday I ran an Apple Hardware Test. This showed one of the 2 RAM blocks in error (4MEM/9/40000000: 0xb8c03818). If I pulled them out one by one and once I’d worked out which one was reporting faulty the iMac operated OK the first time, if I used the good one alone. Using the faulty one I got the regular ‘horn’ as it couldn’t operate without workable RAM. With both in it still reported one as failed. It didn’t matter even if I swapped the good one between the two slots, the iMac would work but with only the faulty one in either slot it wouldn’t. There were no reports of Hard Drive issues?
    I also ran the Rember app which reported a RAM error.
    Interestingly after all this and even with the one working RAM in place it would eventually not boot so I am now booted from a USB connected carbon copy cloner back up. I presume this is because the failed RAM introduced corruption (again).
    I have now replaced the 2 RAM blocks (good ol' Mr Memory FoC) and AHT and Rember report it as OK. Still  no HDD errors reported with AHT?
    Questions:
    1/ Do I really have a hard drive issue or a RAM issue?
    2/ Or both?
    3/ Is it possible that the RAM issue has caused the other reports and could it cause SMART Utility fault reports?
    4/ Are SMART Utility faults 'latched' i.e. once triggered, they remain in place?
    5/ Is there something I have missed?
    6/ How can I be confident of identifying the core issue?
    Any thoughts, help, expertise appreciated.
    Mervyn
    Can failed RAM really screw up external drive files, writing, etc?

    With another system in the computer's hard drive along with the old one,
    there is alot of stuff in there. If an archive and install procedure was done
    and her old settings saved into the new system, the older one could be
    tossed; but ever so carefully.
    Booting into the OSX installer disc#1 and use the Installer's own Disk
    Utility version (found in menu below Installer, in main menu after booting)
    can be helpful in doing some repairs to the hard drive; by chosing the
    "repair disk" item in disk utility; you can run it more than once. [Also,
    using repair disk permissions is helpful; this latter thing can be done
    in the regular in computer OS as it is running the machine. Choose
    Disk Utility in the Utilities folder, launch it, choose the Mac HD item
    from left side menu, and run repair disk permissions. When it is done,
    quit Disk Utility. Also, consider getting OnyX (free download online
    from Titanium Software) and run the items in Automation monthly.
    Repairing disk permissions before and after installing upgrades is a
    good idea; and if this has not been done, issues can result.
    And the hard drive may be getting really full, sluggish systems can
    have too much in the drive and not enough free space. See how
    much free space is in the hard drive by single clicking its icon and
    use Get Info from in File in the main menubar. For troubleshooting
    user account/permission issues, some people create a new user
    account; that helps to tell if the main "admin" account has problems.
    There is alot more to this; so see what you come up with and then
    post back if you find anything new or if repairing permissions and/or
    other things show promise. The extended warranty sounds good.

  • Dv6 hard drive failing how do i transferrer os 7 and hp info ??? i have a 500g wd replacement for it

    dv6 hard drive failing how do i transferrer os 7 and hp info ??? I have a 500G wd replacement for it.
    I have transferrer my self using WD Smart ware and a separate win 7 backed up to a WD 2T external ( win 7 backup is now struggling to back up but I do have one copy)
    when new HD was put in, and repair disk put in it wouldn't pick up the back up off the WD 2 T. WIN 7 or my manual backup. 
    So I loaded up a win 7 32bit (off an older computer which is now parts) but it wouldn't reconis Win 7 back up on the WD 2 T.
    Using WD smart ware.  I did transferrer all the files over to the new HD but could only make an put it in a new folder. Not reload  back to the same as it was before I had to transferrer every thing. 
    I am know stuck with win 7 32bit can't use all 6G memory an no Hp info on comp .+ no ordinal  programs or settings install 
    there is probably some small thing I have mist  thanks for your help

    Hi,
    Here is a topic which helps you to clone the old HDD:
       http://www.makeuseof.com/tag/5-ways-to-clone-and-copy-your-hard-drive/
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • My hard drive failed and I can't afford the professional data recovery.  Do I have any other options?

    I have a 13" Early 2011 Macbook Pro.  Last week the hard drive failed (for the second time), and when I took it to the Apple Store I was told it would cost $177 to replace the hard drive and the cables.  I intend on going through with this and getting it fixed, however the man I talked to said I should hold on to it a little longer before giving it to them for repair in case I want to recover my data.  When I researched how to recover the data, my answers mostly consisted of taking it to a professional to do so.  I found a local authorized service provider who said they could do so, however I was told it would cost at least $400 to recover my data (possibly more depending on how much data there is to recover).
    I can afford to pay $177 to fix the hard drive.  I cannot, however, afford to pay an additional $400+ to get all of my data back.  Yes I realize I should have backed my files up onto an external hard drive (I'm not the most computer-savvy person), but honestly, all I really need is my photos.  When my hard drive was in the process of failing, I got a flash drive and put a lot of my files onto it so I would at least have some of them when I got my Macbook fixed.  At this point, I can't even turn it on, so I am not able to go into iPhoto and get my pictures.
    Is there any way I can do this myself?  There is no way I can get this done professionally.  I would love to be able to all of my data and files back, but if I can just get some that is better than nothing.  Any help would be appreciated!

    obesity wrote:
    It was really empty. Clicked on, nothing.
    But no prohibited signs, like these:
    Get info on folder, zero kb. Just one user account on each mac.
    I did navigate back several days prior to my Mac dying. Still nothing.
    Sounds like it may have been excluded, or perhaps damaged. 
    Just for future reference, it's always a good idea to keep "secondary" backups.  See #27 in Time Machine - Frequently Asked Questions for some suggestions.

  • My 5 year old iMac's hard drive is at the point of failing.  I'm trying to save al files on it, but it wont allow backup via Time Machine to an external hard drive.  How can I keep from losing all the files and programs if the hard drive fails?

    I'm concerned that my iMac, purchased 5 years ago, is about the crash and I can't back up my files and programs to an external hard drive via Time Machine because the computer freezes after only a couple hundred MB and gets nowhere near the required amount.
    How can I save these files and programs if the computer hard drive fails or has to be replaced without the backup being able to be done? I need to do something quickly, but I'm not sure what I can or should be doing.

    Get an external hard drive, some good ones that I like are the OWC, http://www.macsales.com Mercury Elite Pro drives...they are very good and reasonably priced.
    Get the drive, connect via USB or FireWire, then use Disk Utility to format the new drive as Mac OS X Extended (Journaled), and then use Disk Utility to Restore the current drive to the new drive.  Restore actually clones the drive so you will have a bootable backup on the external drive.
    After you have formatted and named the external drive, click Restore in the main Disk Utility window, drag the name of the old hard drive to the Source box, and drag the name of the new external drive to the Destination box.  DU will make an exact clone of the internal drive on the external drive.
    That clone will be a complete backup of the operating system and all of your data.
    You can test it by restarting the iMac and hold the Option key.  That will give you a grey screen showing all bootable drives.  Just click the external drive, then click the upward pointing arrow under it and the iMac will boot from that drive.

  • My hard drive failed. My applications were on the drive including Excel, Word, and Powerpoint. Apple told me I could pull everything from the failed drive. I tried that but the drive is bad so I can't get to anything. Do you think Apple will reinstall?

    My hard drive failed. My applications were on the drive including Excel, Word, and Powerpoint. Apple told me I could pull everything from the failed drive. I tried that but the drive is bad so I can't get to anything. The Office package was installed/included when I purchased the Mac. Does anyone think Apple will provide me with the Office package? Thank you!

    Thank you everyone. I apologize to confusing all but I am up to date and running OS X 10.8.2.  It's possible I purchased the key for Office but I don't think so although it was 3-4 years ago. I guess I will stop in the Apple Store and just ask. I may just buy the new bundle anyway to get the most updated.
    I have read there are issues with the MS Office bundle running on our latest OS, is that true?
    Thank you all!!! You've been great!

Maybe you are looking for