Hard Drive failed now time capsule connecting to backup volume for hours

My main hard drive went bad. I had a spare in my machine. I installed osx on the spare and then migrated all of my data from my time capsule (which had worked like a champ). I am now running fine again and I have all my files, music, apps, everything I had before my hard drive went bad. Now the only problem I have is when I try to connect to time capsule now, there is a little window which reads "connecting to backup volume". It has been this way for hours and I suspect there is something amiss. If it were simply preparing and looking to see what has changed, it would have connected. Can anyone help me out on this problem? I would truly appreciate it.

John,
*Reboot Time Capsule*
Unplug the TC from the wall outlet.
Wait 10-15 seconds.
Re-plug it in again.
After it has restarted (30-60 seconds), does it show up in Airport Utilities?
If not try "Rescan" again from the File Menu.
Next, if you want to continue using the TC for Time Machine backups do the following:
*Reselect Your Time Machine Disk*
Go to System Preferences --> Time Machine.
Use the slider on the left to turn “OFF” Time Machine.
Click the "Change Disk..." button.
Select "None" and click "Stop Backing Up".
Now click "Choose Backup Disk" and reselect your backup hard disk again.
Now use the slider on the left to turn “ON” Time Machine.
Close System Preferences and try backing up again.
*Full Backup After Full Restore*
Bear in mind that in all cases Time Machine will perform a full backup after a full restore. This is normal. Time Machine will resume incremental backups after the full backup has completed. To view previous backups, Control-click or right-click the Time Machine icon in your Dock or Option-click the Time Machine menu extra and Choose "Browse Other Time Machine Disks," then select your previous backup volume. You will enter Time Machine and be able to browse your previous back ups and restore files. (http://support.apple.com/kb/TS1338)
So even on unchanged hardware, if you reinstall your system software and restore your user data, Time Machine starts anew, and you will not be able to resume backing up with the same history as the previous backups.
While there may be ways to fool/hack Time Machine into recognizing previous backups without performing another full backup, they are likely rather elaborate.
Ultimately, though, in a couple of months, all the effort to preserve old backups may seem pointless. After all, Time Machine will eventually purge away that data anyways as it replaces it with new files.
It may simply be easier to begin a fresh series of backups while saving the previous backups until your satisfied that you have enough history built up. Then delete the old backups.
Let us know if the above helped.
Cheers!

Similar Messages

If I connect an external hard drive to the Time Capsule, all it automatically back it up?

If I connect an external hard drive to the Time Capsule, will it automatically back it up? Or do I need to somehow configure it in TIme Machine?

A HDD attached to the Time Capsule (TC) will not automatically back it up, nor can you configure Time Machine to do so. However, you can use the AirPort Utility to archive the contents of your TC's internal HDD to this attached drive.

I connected a external hard drive to the Time capsule but I can't get it to connect, I connected a external hard drive to the Time capsule but I can't get it to connect

I connected an external hard drive to the Time Capsule but can't get it to work.

And are you using a powered USB hub? The USB port on the Time Capsule is under powered, so you almost always need to use a powered USB hub, even if the hard drive has its own power supply.

If i connect an external hard drive to a time capsule, can i access this drive via internet?

If i connect an external hard drive to a time capsule, can i access this drive via internet?

If the drive can be accessed in local lan, then it can be accessed from internet assuming you have setup using one of the remote access methods.
See remote access here.
https://discussions.apple.com/community/wireless/airport?view=documents

If i connect an external hard drive to my time capsule will it be backed up on time capsule?

I recently connected an external hard drive to my time capsule using the usb port on the time capsule. Will that external hard drive be included in the time machine back up? If not, how do I include it?

Time Machine cannot back up a hard drive that is connected to the USB port on the Time Capsule.
If you want to backup the hard drive, it must be connected to your Mac to be included in Time Machine backups. Additional settings will need to be made if you do this, so post back for details if you need them.
If you cannot connect the drive to your Mac, then you will need to use another backup program like Carbon Copy Cloner, SuperDuper or Chronosync to backup the hard drive to the Time Capsule.

Searching external hard drive attached to Time Capsule

I have a 1 TB Time Capsule which I use for backing up my 2011 MacBook Pro and for providing my WiFi. I also have a 1 TB external hard drive plugged into my Time Capsule which I can access via WiFi. I can go to Finder on my laptop and browse the folders/files on my external hard drive. It appears under Shared in the sidebar of the Finder window. I can open files from it and I can save files to the drive, so it appears to be working fine. I have hundreds of gigs of files on the drive. But when I was recently hunting for a specific file, I noticed that my Spotlight wasn't doing a very good job at finding files on my external hard drive. I tried many different searches - by name, by type, by date - and had no luck. But as I was searching, I realized that I had more files of certain file types than Spotlight was showing me. So I tried searching for files I first confirmed were actually on the external drive. And again Spotlight failed to find them. If I used a partial filename search, it would find some files that matched but not the ones I was looking for.
So, this led me to think the index is corrupt. I'm not sure if this problem is related to my recently upgrading to Lion or not, since I haven't had to search the drive in awhile. I tried to force Spotlight to recreate the index on the drive by using the Privacy panel trick (of the Spotlight Preferences) but that didn't work. I then tried to get Spotlight to recreate its entire index and I think all that did was recreate the index for my internal harddrive.
So, are there things I need to know about attaching an external hard drive to a Time Capsule that I perhaps forgot to do? Should I be able to search the drive with Spotlight? Do I have to somehow force Spotlight to look in external drive when doing a search or is it supposed to search everything it can?
I should mention I have been having a little trouble with my Time Capsule as well. I recently had to erase the drive and set up a whole new backup since the backup was failing - not sure what happened to it, but it seems to be working again now. But I did notice yesterday that my Time Machine hadn't backed up all day but it was not giving me a warning message. It was just sitting there not backing up. I had tried resetting my PRAM and after doing so, my Time Machine was back to backing up. I'm not sure if the PRAM reset helped with that or if it was just the restart of the laptiop.
One more thing - I feel like since upgrading to Lion I have had to restart my laptop more than ever. Things just start acting funny, especially when I am using Safari and I find myself resetting Safari and then restarting my laptop all the time. Odd.

It should be HFS+.. it may work with fat32 but that is a lousy format.
The actual format of the drive is irrelevant to the PC.. the TC offers SMB connection.. so it is a true file sharing device.. the format used to store the files cannot be directly read by windows but is "interpreted, translated" via the firmware of the TC.
BTW this is true of all network storage.. A NAS can store files in whatever format its OS requires.. freebsd like freenas might use XFS.. or linux use EXT2 or REISFS.. it makes no difference as long as it offers that store to the windows (and apple) network as SMB.. then windows can handle it.

I have an external hard drive from my time capsule that stopped working on me. I am attempting to access the data with a hard drive reader on my MAC. I am able to see the drive in disk utility and under system info USB. But I am unable to access the data.

I have an external hard drive from my time capsule that stopped working on me. I am attempting to access the data with a hard drive reader on my MAC. I am able to see the drive in disk utility and under system info USB. But I am unable to access the data and it does not show on the desktop when connected.

Ok if disk utility was able to verify the drive I doubt there is any problem.. are you trying to open a TM backup??
You need to mount the sparsebundle then check the actual info inside the bundle.
Don't use disk warrior.. if the disk has verified then unless you deliberately deleted files there is nothing that is going to do.
Pondini has a lot of stuff about getting access to the sparsebundle.
http://pondini.org/TM/17.html
But if you have copied info to the TC that is now gone.. and the disk is ok.. I am not sure.. the TC will not have deleted the files itself.

I have a time machine backup file on a USB hard drive. I bought a time capsule / airport extreme, flat 3TB. I wish to transfer the backup file from the usb hard drive to the time capsule hard drive. 10.6.8

I have a time machine backup file on a USB hard drive. I bought a time capsule / airport extreme, flat 3TB. I wish to transfer the backup file from the usb hard drive to the time capsule hard drive. 10.6.8

Unfortunately, Time Machine backups that are stored on a drive that has been connected directly to a Mac are completely different than Time Machine backups that are stored on a Time Capsule.
Frankly, it is not worth the effort and trouble to try to transfer the old backups to the new Time Capsule.....my opinion....having done this in the past.
It is possible though, but I would not recommend it due to the complexity and downsides involved with this. To give you an idea of how to do this, check out this support article.
http://pondini.org/TM/18.html
Even if you transfer the "old" backups over to the Time Capsule successfully, Time Machine will not simply "add on" to the old backups.
Time Machine will make a new complete backup of your Mac and then add incremental backups from that point.
My advice.....start a new backup on the Time Capsule and move forward. Keep the USB hard drive around for a month, maybe 2 or 3 in case you need to go back to an old backup for some reason. At that time, you will not likely need the old backups at all since you will have a current 2-3 month history of new backups. At that point, you can erase the USB drive and use it for another purpose.

I want to take files from my PC (using a Seagate external hard drive) then plug this Seagate External hard drive into my Mac Book Pro and move the files from the Seagate External Hard drive onto my Time Capsule. I do not want to put these files on my Mac

I want to take files from my PC (using a Seagate external hard drive) then plug this Seagate External hard drive into my Mac Book Pro and move the files from the Seagate External Hard drive onto my Time Capsule. I do not want to put these files on my Mac. How do I do this? Where do I put these files on my Time Capsule? Will it affect the functioning of my Time Capsule?

Mixing files with data is not always great idea.
See info here.
Q3 http://pondini.org/TM/Time_Capsule.html
Why not just connect the PC directly to the TC by ethernet and copy the files over?
It is hugely faster and much less mucking around.
In windows load the airport utility for windows.. if you have not already as this will help you access the drive.
There is more info here.
http://support.apple.com/kb/HT1331

External hard drives compatible with time capsule generation 3

I am trying to connect a little 160Gb HP hard drive to my time capsule via a hub which also connects successfully a non wireless printer. This particular hard drive uses two usb in's to connect. Once i plug it into time capsule, it powers up, thinks for a while,the wee blue light becomes solid and there it is.
However it does not show up in the finder sidebar under Shared - though i have set preferences to show everything. the hard drive is formatted correctly, and i can access it when i plug it directly into the imac.
am i missing something ? or is it just not compatible with my time capsule ? - perhaps the two usb connections are the cause? i just want to be able to save files and access them on the external hard drive via the network from imac and laptop, instead of having to plug it in to either.....
any help much appreciated...
janemae

yep am using a usb hub,time cap. has only the one usb port- yes two usb outs on the hard drive , sorry, which merge into one into the hd, is bus powered...

Hi iv got a sky router downstairs and a time capsule up stairs how do i set it up so that it just extends the sky wifi and then the hard drive in the time capsule is accessible from all over the house thanks

hi iv got a sky router downstairs and a time capsule up stairs how do i set it up so that it just extends the sky wifi and then the hard drive in the time capsule is accessible from all over the house thanks

Connect an Ethernet cable from one of the LAN <--> ports on the back of the Sky router to the WAN (circle of dots icon) port on the back of the Time Capsule. This connection must be maintained at all times.
Then, using the setup "wizard" on your iMac illustrated below, configure the Time Capsule to create a wireless network that uses the exact same wireless network name and password that the Sky router is using.
You can get the setup wizard going in several different ways, but the simplest might be to click the WiFi icon at the top of the Mac's screen and then click on Time Capsule under the heading of New AirPort Base Station.
The wizard will open up and analyze the network, then the suggest the correct setup. The example below shows an older AirPort Express that is about to be setup in the same way. You will see a Time Capsule icon on your screen when you run the setup wizard.

Can the hard drive from the Time Capsule be used as USB drive only?

My Time Capsule "router" kept losing the wireless capabilty, so I purchased an Airport Express (with the dual-band router).
I'd like to salvage the Time Capsule hard-drive portion and connect it to a USB port.
But when I plug-in the Time Capsule, the light blinks yellow suggesting some configuration problem.
When connecting to a USB port, my iMac will not detect a new device.
Can the Time Capsule hard-drive be used separately from the router?

Can the hard drive from the Time Capsule be used as a USB drive only?
Sorry, but no. The Time Capsule is a network drive, so it must be connected to a network using an Ethernet or wireless connection. The USB port on the Time Capsule is there only to add additional storage capacity.
Can the Time Capsule hard-drive be used separately from the router
Yes, you would configure the Time Capsule in Bridge Mode to do this. If you do not need the wireless capability, you can turn the wireless off on the Time Capsule.

I'm a beginner with iMovie and my hard drive is filling up fast. How do I move the event files from the hard drive to my time capsule?

I'm a beginner with iMovie and my hard drive is filling up fast. How do I move the event files from the hard drive to my time capsule?

you should never (ab)use a designated backup-setup for 'ordinairy' storage tasks.
plus, the wireless connection to TC is too slow for iMovie.
purchase any ext. usb-harddrive, 500Gigs starting at 50$ ...
you HAVE to follow advice given here:
http://help.apple.com/imovie/#mov3ac6d42c

How to proceed on transferring the content of an external hard drive into the time capsule.

I just bought a new MBP and a 2T time capsule but i don’t know how to proceed on transferring the content of an old external hard drive into the brand new time capsule.
The old external hard drive is a carbon copy of another external HD which was my time machine backup but unfortunately someone stole it from me… so I was thinking about transferring the content from the old external hard drive to the time capsule and then set time capsule as the new time machine backup.
Is there anybody whose can give me a hand and tell what is the best to do?
Thanks
sb

Configure Time Machine preferences. Be sure to remove the external drive from the Exclude list.
Mac Apps - Apple Support
Mac Basics
Welcome to Mac Support

I need to add a secondary hard drive to my time capsule. Can something that has been set up for a windows machine work without re-formatting?

I need to add a secondary hard drive to my time capsule. Can something that has been set up for a windows machine work without re-formatting?

In addition to Niel's comments, if you plan to use Time Machine to backup a Mac to the secondary drive.....that application needs a drive that has been specifically formattted for Mac. That would be Mac OS Extended (Journaled).
PCs can also read and write to the Mac formatted drive.

Hard Drive failed now time capsule connecting to backup volume for hours

Similar Messages

Maybe you are looking for