Hard drive failed on original Macbook. No OSX discs came with it. Now what?

I had my hard drive fail on my original Macbook and I didn't get any OSX discs when it came from Apple all those years ago. So do I try and find Tiger, the original OS, or look to upgrade to Leopard? I can't find any answers on what really to do here and I need to get it up and running because it's the first week of school and I don't have a computer (thank goodness for my iphone).
I've looked on Amazon for OSX and found some Leopard. I have 2.0Ghz with 2GB RAM in my Macbook now and will be getting a new hard drive Friday. The Leopards on there run for about $275 new. I was hoping it wouldn't be that much, but I might now have any other options.

bentaulbee wrote:
I can do a clean install on a new hard drive with the Snow Leopard Upgrade version?
I did a bit of research and found out that you can not without a previous install of Leopard. I did, however, find that the Mac Box Set has a full install DVD AND contains iLife and iWork. It can be found [here|http://store.apple.com/us/product/MC209Z/A].

Similar Messages

  • Repeated computer 'freezing'. Is hard drive failing on my MacBook Pro 2006?

    Over the past two weeks my computer has been 'freezing'; with increasing frequency. The entire screen freezes with the exception of the cursor - when moving it around the screen it highlights and unhighlights text. The only way to escape is to turn off the computer using the power button. The time between freezing events varies from 5 to 60 minutes or so. Is the hard drive beginning to fail? Or, is this some other issue?

    Thanks for the advice. Is using Disk Utility from the OSX installation disc more helpful than what I did prior to posting my question here?>>>From Disk Utility on my computer I ran in this sequence: Verify Disk (no issues), Verify Disk Permissions (several issues listed - don't understand any of it) and finally Repair Disk Permissions (no issues listed after performing this).
    Thanks.

  • What is a great 1TB portable hard drive for a new macbook pro that works great with lightroom?

    I want to keep all my photos on the portable drive while working in lightroom. Is there much speed difference between USB 3 and thunderbolt?

    You might want to take a look at the LaCie Rugged series.
    You can get it in both USB 3 or thunderbolt....yes, thunderbolt is easily 2-3x faster than USB 3.
    Tom

  • I downloaded CS6 (I had to wipe my hard drive) I got (1) of (2) and (2) of (2) downloaded - NOW WHAT?  No instructions on how to install?

    Anyone who can help it would be appreciated
    It is is like Adobe has abandoned what they sold me in 2012

    if you downloaded an exe and a 7z file, put both in the same directory and click (or double click) the exe.
    any other situation, what os, what files did you download (names and extensions)?

  • I RECENTLY HAD THE HARD DRIVE REPLACED ON MY MACBOOK PRO 8.1 UNDER WARRENTY NOW I FIND I CANNOT INSTALL I LIFE FROM MY ORIGINAL DVDS

    I RECENTLY HAD THE HARD DRIVE REPLACED ON MY MACBOOK PRO 8.1 UNDER WARRENTY NOW I FIND I CANNOT INSTALL I LIFE FROM MY ORIGINAL DVD  my original os was 10.6.7  now running 10.6.8

    Download & install this:
    http://support.apple.com/kb/DL1512

  • Macbook Pro Hard Drives Failing

    Hi all,
    I've been having massing problems with my Macbook Pro 15" 2.53 Ghz laptop. I got one brand new with apple care in December of 2008. The hard drive was the standard 320 Gb @ 5400 RPM.
    Within approximately two weeks of operation the computer failed (froze and after a hard shutdown wouldn't boot). It turned out the hard drive failed. Two weeks! So I took it back to Apple and they replaced the hard drive (took them one week so I lost a week of productivity).
    One week after receiving the laptop back, the hard drive failed again! This time I believe the OS got corrupted somehow as the symptom was that it would not boot.
    So back to Apple and they straight out replaced it with a new one. One week later, guess what? Failure. So back again and they replaced it.
    I'm now on my 3rd laptop from Apple and this hard drive is failing. Luckily I was able to back everything up. I downloaded a utility called SMART Utility and it tells me 60 some sectors are bad on this disk.
    Is anyone else having issues like this? Its absolutely ridiculous. Currently the computer is working despite the failed sectors and horrible sounds coming from the hard drive but I expect failure soon. I'll be taking this back to Apple and showing them the results of the SMART Utility, but I'm at the end of the rope here.
    I've owned multiple Macbook Pros before and absolutely loved them. But now I am so disillusioned by this... To Apple's credit they have had great customer service, but now I'm at the point where I need to be able to rely on my machine.
    Has anyone heard anything?

    I would second Michael's comment. While hard drives do fail, the rate at which yours are failing would appear to be well beyond the statistical average. I would generally think the next level would be a problem with the MacBook itself causing the failures, but from what I can tell from your comment is that they have replaced your MacBook twice (and you're on your third?). So that would seem to rule out a problem with the MacBook itself. You mentioned that you've had other MacBooks before and it doesn't sound like you've had problems with them... so I wouldn't expect that you're doing anything unusual that would cause the problem.
    You're either had a remarkable run of bad luck, or there's something going on that's out of the ordinary causing these drives to fail. I would imagine that when stores get machines, they're likely shipped from batches that are manufactured at similar times. If they had a batch of faulty drives from the manufacturer, it's possible a single store could have gotten several of them. That would still not really explain why your initially replaced drive failed as it would likely have come from a totally different batch than what would have been used in manufacturing at the time your notebook was put together. I guess it's always possible that they might put in a drive that that wasn't new.

  • Hard drive failing on Macbook 13" OS 10.7.3 Need to xfer all files to an iMAC 21.5. How to do this?

    Hard drive failing on Macbook 13" OS 10.7.3 Need to xfer all files to an iMAC 21.5. How to do this?

    Can you boot the MacBook into FireWire Target Disk mode? That turns it (temporarily) into an expensive hard drive. You can then move files.
    Another way would be to use an external hard drive, attach it to the MacBook and user software such as Bombich's Carbon Copy Cloner to copy the hard drive (assuming you have sufficient space on the iMac.)
    Best of luck. Please keep your data backed up in the future to avoid this. It'll make your life easier.

  • I recently added my old mac hard drive to a new macbook with an SSD as my main OSX drive.  I am having trouble with permissions in viewing my old hard drive.  What is the best way to get complete access to my old hd installed in my new Macbook?

    I recently added my old mac hard drive to a new macbook with an SSD as my main OSX drive. I am having trouble with permissions in viewing my old hard drive, when I save a permission when I reboot the full access is changed again .  What is the best way to get complete access to my old hd installed in my new Macbook?

    Open the Get Info window for the old drive. Click the Lock icon on the bottom of that window and type in your password. In the permissions area click the Plus sign ( + ) and Add your Username to it and set it to Read & Write. Close that window. you should now have full access to all the files.

  • Macbook Pro 13" Late 2011 hard drive fails, how to replace hard drive?

    Hi!
    I have a Macbook Pro 13" Late 2011 (OS X Mountain Lion v 1.3.18 (352.4). I tried to install OS X Mavericks but it showed this error message:
    "This disk has S.M.A.R.T. errors. This disk has a hardware problem that can't be repaired. Back up as soon much data as possible and replace the disk."
    The laptop was still doing fine so I didn't do anything. Then it started to act funny: iPhoto stopped working, hangs when I watch video streaming, and it started to run really slow. I only use the laptop's basic features- internet, watching movies, editing using iMovies so it's really strange for me that the hard drive failed all of a sudden.
    I called Apple support and a kind fellow tried to troubleshoot it, thinking it was only a software problem. In the end, he said I need to bring my macbook to the service center and have the hard drive replaced. I know it will cost a lot so I want to replace the it myself.
    Here are my questions:
    1) Can this problem really be solved by just replacing the hard drive?
    2) Can I use SSD this time so my Macbook can run faster?
    3) What SSD is recommended for my late 2011 Macbook 13"?
    4) I don't have the installation disk, can I still install the OS X Mountain Lion? How?
    I am looking for other sites as well but I hope this community could share some tips too.
    Thanks a lot!

    I've switched out the hard drive on my Late 2011 model several times and I've never disconnected the battery cable.
    In my "Opinion" it is not necessary to do that. Not sure if it is or not recommended by Apple.
    EDIT:
    I just looked at my User Manual, PDF I downloaded from Apple, and there is no mention of disconnecting the battery.
    Here's a link to the manual for my model.
    http://manuals.info.apple.com/MANUALS/1000/MA1602/en_US/macbook_pro_15inch_late_ 2011.pdf

  • Macbook hard drive fail....I think?

    I have a Macbook that when booted just displayed a folder icon. Thru searching I believed the hard drive failed.
    80gb drive fails "verify disk" so I ran "repair disk". It says it repairs but always fails again on verify.
    So I purchased a new hard drive (500 gb) Installed it and when I tried to partion it it appears as a 3.6 TB drive??????  So I returned the drive and got another only to have the same issue?
    Is it the drive? Some other part? Please help?
    Thanks!

    What is it you need - Windows installer disc or something else?  Your question is unclear.  Could you be more specific?

  • My 2008 Macbook Pro logic board failed...am I still able to copy that hard drive onto my 2011 Macbook Pro hard drive?

    My 2008 Macbook Pro logic board failed...am I still able to copy that hard drive onto my 2011 Macbook Pro hard drive?

    What you can do is to extract the hard drive from your old computer, put it in an enclosure and connect it to your newer computer, so you can restore your data.
    It's not too difficult to do it yourself, but if you think you will do something wrong, take it to a store where you can get your data restored

  • MacBook Pro won't boot with new hard drive, but a different MacBook Pro will

    So here are the details. My friend and I both have 13-inch Mid 2010 MacBook Pro's. Same processor and specs since they were purchased at the same time, but originally had 250 GB hard drives. His hard drive failed and needed a new one. Put a 500 GB Seagate Momentus 5400.6 in his computer, and tried using a flash drive with "Install OS X Mavericks" on it to install Mavericks on his new hard drive. No matter what, it wouldn't install. I finally was able to install OS X 10.9.4 on it by connecting the new hard drive to my computer with a USB hard drive enclosure. I put the hard drive back inside his computer and it wouldn't boot (stuck on the gray screen with apple logo and a spinning wheel). I then attached to the hard drive to his computer externally with the USB enclosure, and then it booted and worked perfectly.
    So, it seemed like the problem was with something inside his computer, but then I switched our drives, and that doesn't seem to be the case anymore. I put my original hard drive into his computer, and his new hard drive into my computer, and they both booted and worked perfectly, so I have no idea why his computer will not boot with the new hard drive internally.
    To summarize, his computer boots with: 1) new hard drive connected externally (won't work if it's internal), and 2) my hard drive internally
    but my computer boots with: 1) new hard drive connected externally AND internally, and 2) my hard drive internally.
    Both hard drives have OS X 10.9.4 installed
    If anyone has any idea what's causing this and how to make his computer work with the new hard drive internally that would be greatly appreciated.

    So after switching the internal SATA cables from each computer, now we have
    His computer, with my SATA cable:
    1) Worked with every hard drive!
    My computer, with his SATA cable:
    1) Works with 1 TB Toshiba hard drive
    2) Works with 500 GB Seagate hard drive
    3) Works with my original hard drive
    4) Flashing folder with question mark with his old hard drive
    So it turns out you were right! Definitely had something to do with the SATA cables. But it's still strange that mine was able to boot with all the hard drives except the one that was originally in his. So it seems like it was some combination of his SATA cable and something else, since when his SATA cable was in his computer only 1 hard drive (my original) worked, and when it was in my computer, 3 hard drives worked. But at least its working, and I'm just gonna keep our SATA cables switched since that seems to work out fine

  • New hard drive failed verification/repair

    After my hard drive in my 2013 MacBook Pro suffered damage, I replaced it with "WDC WD5000BPKX-00HPJT0 Media." I formatted the hard drive with a partition. However, after several attempts to reinstall the OS X, it still failed. I tried to verify and repair the partition in the "first aide" tab, but both of those failed. What does this mean? What do I need to do?

    So here's my standard liquid spill spiel:
    Whenever a liquid spill occurs the first thing that has to happen is the laptop should be shut down immediately. All power must be removed as soon as possible. It is especially important that the battery be disconnected and removed.
    All affected parts must be removed from the laptop. No attempt should be made to start/restart the computer since this could potentially damage the logic board beyond all repair.
    Then all affected parts would be washed in deionized water and blown dry with compressed air. (In a water spill the deionized water is probably not as critical. Depends on the mineral content of the water.) and blown dry with compressed air.This is especially true of the large chips on the logic board. Water can wick under them and cause havoc.
    The logic board should be placed in a drying/dehumidifing oven for at least two days. Longer depending on the spill.
      The keyboard is a separate matter.
    "The computer worked for a couple of months and then just qu"
    Ok so even if the coffee just went onto the keyboard it would have leaked through onto the logic board.
    "flashing folder with a "?" on it."
    So right it's not seeing the hard drive or the OS is corrupted or the hard drive died. Unlikely the hard drive died due to coffee spill. They're mostly waterproof except for the vent hole and of course the driver board is vulnerable as are the connectors.
    "In fact, I wrote the above post on the MBP."
    How were you able to do that? How did you boot the machine?
    External HD? If that's the case did you should try the original internal drive in the external case.
    Internal HD? If that's so then the WD is defective or try to put it in the external case and see if DU sees it and can reformat it. GUID partitioning scheme.
    So see the second window has the amount of RAM.

  • Iphoto external hard drive transfer to erased macbook pro does not look like my orgirinal

    While on an Apple Care phone call, the tech had me erase my hard drive when logging me in as a test user did not fix the problem.
    Mountain Lion is reinstalled but when I transferred my iPhoto Library from the external hard drive to my laptop, rather than putting in the 297 events & 11,292 photos that were on it, it put on some 48,000 photos and very few of my events are still original. Some photos show up 4 times, some randomly, some together.
    It also has done strange cropping things with other photos, part of a face or objects shows up as if it had been cropped, it is a self-induced cropping. Very strange indeed. Information under the photos show lots of different letters and numbers that are foreign.
    So, should I return to the Apple store? This is the second logic that has been put in in the month of December. One on December 12, picked it up on the 18th and it failed. Returned it and another logice board was put in. Is this a software problem, they re-installed Mountain Lion on December 30th.
    Any help would be most appreciated. Hoping to not have to make another trip to Apple. Thanks.

    I imported all info from the external hard drive to the new MacBook Pro. Seems most all data transferred ok.
    Exactly what did you do? With iPhoto there is no "importing" involved - you simply drag the iPhoto library intact as a single entity to the pictures folder of the new machine and launch iPhoto letting it convert as needed
    With the following exception with iPhoto application,
    You would do nothing with the iPhoto application - you use the new iPhoto application installed on yoru new system - you only move the iPhoto library as noted above
    You can try Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library
    LN

  • Looking for a hard drive for a 2007 Macbook Pro

    I am looking around to replace my 160 gig hard drive for something larger.
    These are my choices:
    Hitachi 500GB Travelstar SATA 7200 RPM
    Hitachi Travelstar 5K500.B - 500GB 2.5" SATA 5400 RPM 8MB
    Fujitsu MJA2500BH-G2 500GB 5400 RPM 8MB
    I am just looking for something that won't wear down the battery, vibrates or produce some noises. Some speed increase would be nice if possible.
    I may pick the Hitachi 500GB Travelstar SATA 7200 RPM. But I am not 100% sure if this is a good drive or not.
    Message was edited by: Sean Coon

    I would choose anything that Other World COmputing would recommend.
    But before I swapped out to a 500GB drive, I would make sure I had redundant backup plans in place: both an external local drive, and offsite backup.
    500GB is an awful lot of data to lose when the drive fails. And it WILL fail at some point.
    What can you possibly fill up 500GB with? If movies or music, that stuff may be better off on its own, small, sleek, 7200RPM hard drive all the time (plus an offsite backup). If you're editing movies, the professionals don;t use their main drives for that - they use quality external drives for editing and storage (plus, of course, an off-site backup).
    Yes, I upgraded my MacBook Pro's hard drive to 200GB (original 7200RPM option was only 100GB). But I cannot fathom - ME, personally - filling up my MacNookPro's internal drive with 500GB of important data. I have a music drive, and work on other large work files on external 7200RPM drives.
    Whatever you do, please have reliable, regular backup schemes in place.
    Clint Bradford

Maybe you are looking for

  • Planned Order Creation using MD_PLANNED_ORDER_CREATE

    Hi ,    I am using the FM MD_PLANNED_ORDER_CREATE , to create planned order . The start date of the planned order changes based on the factory calendar, is there some way to avoid this the FM has a parameter ECM61S used to pass the scheduling paramat

  • Error when installing Adobe Illustrator CS6 (64bit)

    Hello everybody, I've been trying to install all packages inside Creative Suite 6 Design Standard CD but the installation fails, then decided to install one by one and noticed the error comes only when installing Illustrator CS6 (64bit). My PC is run

  • SRM7 Supplier self registration

    Dear Gurus, I'm analyzing the supplier registration in SRM7 using the supplier self service. I have the following questions: 1. During the supplier registration are 2 approval level process available (the first once the supplier has registered his ba

  • Removing date stamps placed on images by camera

    When taking some photos with a Nikon digital camera, the button that places a date stamp on the image as the picture is taken was inadvertantly on. Now I am trying to remove this data from the image and am wondering if anyone knows a fast way of doin

  • My IPad is loosing battery life fast and I have shut down my apps

    My IPad is loosing battery power fast and I have turned off all apps I am not using