Hard drive failing showing the blue screen

Dear Toshiba technical support, 
I have a Toshiba notebook Satellite L305-S5875 for few months, and  it's still in warranty. It shutted down suddenly showing the blue screen saying "physical memory dump...". I tried to restart me computer, but it does the same thing. I tried to reinstall the vista operational system, but it processed half way, then returned to blue screen again.  It seems to me that the hard drive is completely failed. Could you please show me how to fix this problem?
Thank you very much
Best,
Truc Do 

The blue screen error happens when RAM details are dumped into a file. This may be caused by a hardware in the computer. It is possible that the newly installed hardware is not compatible to run in your system. Memory stick problem can also be one of the causes of this error. Sometimes starting your Windows in safe mode will do the trick. To do this, press F8 while your computer is starting up. Then choose safe mode option among the list.

Similar Messages

  • I have a PB G4 that won't start. It shows the gray apple screen, shows the blue screen, and then the screen goes black, and "sleep" light pulses.

    I have a PB G4 that won't start. It shows the gray apple screen, shows the blue screen, and then goes black. The sleep light pulses. From there, I can't turn it off normally. I have tried restarting the PMU. And I have tried unplugging the ac adaptor and removing the battery. From there I have plugged only the ac adaptor in, and it will begin to start but do the same thing once it shows the blue screen.
    I tried only using the battery (without plugging in the ac adaptor) and the same thing happens. I tried starting the computer while holding down CTRL, Option, P, and R, waiting to hear the start up chimes 3 times, and then holding Shift as it starts up. But I still get the black screen once I see the blue one, and the computer's sleep light pulses.
    I need something very important from this computer. And was able to start it last night. I did not shut down the computer, and was going to take it to a friends to use his printer today. The computer was in sleep mode in the morning.
    Thanks for any help!
    Gina

    What your describing could be a logic board or memory issue. 
    You did or did not hear 3 startup chimes?  If you hear 3 chimes when you start it, that would indicate a memory problem.  Try reseating the memory to see if that makes a difference. If you have 2 RAM cards, try one then the other in each slot. If you have 1 RAM card, move it to the other slot. Powerbooks can develop one bad slot.
    You may need to pull the hard drive out of the Powerbook, put it into an external case, then read it from another mac.

  • Hi, my iphone its in recovery mode and when i restore my iphone 5s loading show the blue screen and show note on itunes (unknown error 14) please i need your help please . thanks

    Hi, my iphone its in recovery mode and when i restore my iphone 5s loading show the blue screen and show note on itunes (unknown error 14) please i need your help please . thanks

    In the article Resolve iOS update and restore errors this is what it says about error 14:
    Check your USB connections
    Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4005, 4013, 4014, or “invalid response."
    If the USB connection between your device and computer is interrupted, you may be unable to update or restore.
    To narrow down the issue, you can also change up your hardware:
    Use the USB cable that came with your device, or a different Apple USB cable.
    Plug your cable into a different USB port directly on your computer. Don't plug it into your keyboard.
    Try a different computer.
    If necessary, resolve any further issues with the USB connection, then with your security software.
    If you're still seeing the error message, check for hardware issues by following the next section.

  • I have the new 2011 macbook pro, with lion preinstalled. I want to change the harddrive. I have backed up everything on time machine. when i put my new blank hard drive in will the lion screen startup.How do i get the lion dmg when i am already using lion

    I have the new 2011 macbook pro, with lion preinstalled. I want to change the harddrive. I have backed up everything on time machine. when i put my new blank hard drive in will the lion screen startup.How do i get the lion dmg when i am already using lion

    NicholasLiban -
       When you use the Lion restore as described, it does a fresh install on the hard drive that you can select at the beginning of the process.  This provides a complete install of the very latest version of Lion, including the recovery partition.  The drive that you choose for the installation destination winds up like what you would have on a brand new computer from Apple. 
       - Randy

  • My laptop won't turn on it shows the blue screen but won't come on. Help?

    My laptop won't turn on it shows the blue screen but won't come on. Help?

    Try resetting the SMC
    http://support.apple.com/kb/ht3964
    If it has a removable battery, try removing the battery.
    If neither works, then you may need to bring it in for service.  Bring the power adapter as well, as you may be able to determine if it is the power adapter at fault, or the computer's power supply.

  • My IPhone 5s is frequently reboot and show the "blue screen"

    My IPhone 5s is frequently reboot and show the "blue screen"
    Error code:
    {"bug_type":"110","os_version":"iOS 7.1.1 (11D201)"}
    Incident Identifier: 9E7D62CD-E1FA-443F-81D7-91C2C4257098
    CrashReporter Key:   7290c27dd593ba841d0e97282cc3b97158891820
    Hardware Model:      iPhone6,1
    Date/Time:           2014-05-12 00:16:32.851 +0300
    OS Version:          iOS 7.1.1 (11D201)
    panic(cpu 0 caller 0xffffff80042cd540): "LSU err reported via serror: 0x8820000000000017\n"
    Debugger message: panic
    OS version: 11D201
    Kernel version: Darwin Kernel Version 14.0.0: Fri Mar 28 21:22:21 PDT 2014; root:xnu-2423.10.70~1/RELEASE_ARM64_S5L8960X
    Kernel slide:     0x0000000003400000
    Kernel text base: 0xffffff8003602000
      Boot    : 0x536f9564 0x00000000
      Sleep   : 0x536fe714 0x00073b45
      Wake    : 0x536fe7f4 0x00000107
      Calendar: 0x536fe89d 0x0007b3d4
    Panicked task 0xffffff8085024c60: 16873 pages, 14 threads: pid 16: SpringBoard
    panicked thread: 0xffffff8085cc6000, backtrace: 0xffffff8002d94b10
              0xffffff8003764a10
              0xffffff8003627968
              0xffffff8003605ce0
              0xffffff80042cd540
              0xffffff80042cd7a0
              0xffffff8003621394
              0x000000018f1256b4
    Task 0xffffff8085025ba0: 38507 pages, 149 threads: pid 0: kernel_task
    Task 0xffffff80850257d0: 321 pages, 3 threads: pid 1: launchd
    Task 0xffffff8085025030: 1712 pages, 11 threads: pid 15: UserEventAgent
    Task 0xffffff8085024c60: 16873 pages, 14 threads: pid 16: SpringBoard
    Task 0xffffff8085024890: 838 pages, 2 threads: pid 17: installd
    Task 0xffffff80850240f0: 465 pages, 4 threads: pid 19: fseventsd
    Task 0xffffff8085023d20: 2053 pages, 2 threads: pid 20: vmd
    Task 0xffffff8085023950: 2434 pages, 2 threads: pid 21: sharingd
    Task 0xffffff8085023580: 1839 pages, 4 threads: pid 22: aosnotifyd
    Task 0xffffff80850231b0: 1054 pages, 4 threads: pid 23: imagent
    Task 0xffffff8085022a10: 1025 pages, 2 threads: pid 25: lockdownd
    Task 0xffffff8085021ea0: 526 pages, 2 threads: pid 28: softwarebehavior
    Task 0xffffff8085021ad0: 4005 pages, 30 threads: pid 29: mediaserverd
    Task 0xffffff8085021330: 5819 pages, 17 threads: pid 31: backboardd
    Task 0xffffff8085020f60: 410 pages, 3 threads: pid 32: AppleIDAuthAgent
    Task 0xffffff8085020b90: 1197 pages, 3 threads: pid 33: routined
    Task 0xffffff80850203f0: 568 pages, 2 threads: pid 35: wirelessproxd
    Task 0xffffff808501fc50: 649 pages, 3 threads: pid 37: timed
    Task 0xffffff808501f880: 250 pages, 7 threads: pid 38: syslogd
    Task 0xffffff808501f0e0: 1627 pages, 5 threads: pid 40: wifid
    Task 0xffffff808501e940: 1331 pages, 11 threads: pid 42: configd
    Task 0xffffff808501e1a0: 1562 pages, 2 threads: pid 44: fairplayd.H2
    Task 0xffffff808501d260: 1507 pages, 4 threads: pid 48: BTServer
    Task 0xffffff808501c6f0: 707 pages, 3 threads: pi

        Rmbrown,
    We'll get your phone working quickly again! Plz go to Settings>General>About and let us know the Available GB.
    SarahO_VZW
    Follow us on Twitter @VZWSupport

  • How do I make the photos on my external hard drive appear in the iPhoto screen

    I recently had my hard drive "wiped" at the Apple store to speed it up. In the process I lost a lot which I am now restoring. Prior to the wipe the photos stored in my EHD appeared in the iPhoto screen by default. I have lost that and don't know how to restore it
    Thanx for any help
    poppi

    Are they in an iPhoto Library?
    Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library'
    If not: import them.
    Regards
    TD

  • Alias Hard Drives out of the blue and Trash removal

    In advance , Thank you ! You guys are doing a great service
    All of a sudden I have two hard drives and two external drives on my desktop. They have the little arrow on the bottom left corner and I think they are Aliases . They just appeared after being online . I dragged them to the Trash thinking they would unmount but they are still in the Trash.
    1st) Any ideas on what is going on hear?
    2nd) I've never deleted selected items from the Trash . If I highlight certain items and select Empty Trash will the other items be saved ?
    --bob
    eMac   Mac OS X (10.3.9)  
    Powerbook   Mac OS X (10.4.6)   Panther eMac

    Bob
    They have the little arrow on the bottom left corner and I think they are AliasesProbably. Why not use "Get Info" from the Finder File menu (or Command-I) to find out?
    If I highlight certain items and select Empty Trash will the other items be saved ?No. Emptying the Trash is an all or nothing act.

  • I use the latest Firefox 13.0.1. I'm using Windows 7. After a day I updated my Adobe Flash Player, suddenly it crashed and showed a blue screen. Please help me.

    My Firefox version is 13.0.1. I'm using Windows 7. Adobe Flash Player version is 11.3.300.265. A few minutes after opened the Firefox, suddenly it crashed and a blue screen showed up, it says there are unexpected error occured and forced my computer to be stopped. I need to restart the computer to see either it still show the blue screen or it just fine. After restarted, I use the Firefox once again, but this time, after about 30 minutes, it crashed again. The same blue screen showed up. As I expected, the new Adobe Flash Update crashes with the Firefox 13.0.1. Really need a solution here. Thank you.

    Hi,
    Blue screens usually indicate Windows system level problems involving device drivers like graphics card drivers, hardware errors (RAM, hard drive) etc. Malware may also cause this. Searching for the displayed error code would usually provide helpful pointers. The [http://answers.microsoft.com/en-us Windows forum] would also be helpful.

  • My hard drive failed and I can't afford the professional data recovery.  Do I have any other options?

    I have a 13" Early 2011 Macbook Pro.  Last week the hard drive failed (for the second time), and when I took it to the Apple Store I was told it would cost $177 to replace the hard drive and the cables.  I intend on going through with this and getting it fixed, however the man I talked to said I should hold on to it a little longer before giving it to them for repair in case I want to recover my data.  When I researched how to recover the data, my answers mostly consisted of taking it to a professional to do so.  I found a local authorized service provider who said they could do so, however I was told it would cost at least $400 to recover my data (possibly more depending on how much data there is to recover).
    I can afford to pay $177 to fix the hard drive.  I cannot, however, afford to pay an additional $400+ to get all of my data back.  Yes I realize I should have backed my files up onto an external hard drive (I'm not the most computer-savvy person), but honestly, all I really need is my photos.  When my hard drive was in the process of failing, I got a flash drive and put a lot of my files onto it so I would at least have some of them when I got my Macbook fixed.  At this point, I can't even turn it on, so I am not able to go into iPhoto and get my pictures.
    Is there any way I can do this myself?  There is no way I can get this done professionally.  I would love to be able to all of my data and files back, but if I can just get some that is better than nothing.  Any help would be appreciated!

    obesity wrote:
    It was really empty. Clicked on, nothing.
    But no prohibited signs, like these:
    Get info on folder, zero kb. Just one user account on each mac.
    I did navigate back several days prior to my Mac dying. Still nothing.
    Sounds like it may have been excluded, or perhaps damaged. 
    Just for future reference, it's always a good idea to keep "secondary" backups.  See #27 in Time Machine - Frequently Asked Questions for some suggestions.

  • Portege M200 - hard drive failed

    My 60GB Toshiba hard drive failed in my Portege M200.
    I tried fitting a hard drive I had in my old laptop a 30GB Hitachi hard drive but the laptop doesnt seem to recognise it. Does it need a Toshiba hard drive or is the laptop dead, when I put the hard drive in I get invalid boot disk message.
    The old hard drive goes to a blue screen then reboots laptop.

    No it must not be Toshiba HDD only. I found the list of some compatible HDDs for this old Portege.
    You can use follow HDDs:
    - TOSHIBA HDD2193B
    - TOSHIBA HDD2171B
    - TOSHIBA HDD2184B
    - TOSHIBA HDD2194B
    - HITACHI G8BC00014410
    - HITACHI G8BC00014610
    - HITACHI G8BC00015610
    - HITACHI G8BC00014810
    Anyway, when you try to use new HDD set BIOS to default settings and check if new HDD will be recognized properly in BIOS settings.
    Is old HDD recognized properly in BIOS settings?
    Have you tried to install OS using old HDD?

  • Mac mini hard drive crashed. The ecovery drive only offers to reinstall mavericks on the recovery drive. Doesn't see the hard drive. What can I do?

    Hi, I have a mid-2011 with Mavericks installed. It crashed. I can boot into recovery mode. And it shows me the name of the hard drive and the recovery partition. When I boot back to the hard drive, it gives the grey screen and a long progress bar. WHen the progress bar eventually fills up, the computer just shuts down. In recovery mode, Disk Utility says the hard disk cannot be repaired.
    But when I try to re-install Mavericks from the Recovery Partition, it only shows the recovery partition as the destination, not the rest of the computer.
    Not sure what to do.
    Thanks if anyone has any advice.
    J

    Thank you very much for the reply.
    Indeed, Disk Utility can't even erase and reformat the drive. It's toast.
    This is very disappointing. Second Mac Mini I've had go out this year. First seems to be a logic board issue. Now the hard drive on the newer machine.
    At least I was able to use Disk Drill to get photos and other important files off the Mini. I had a Time Capsule, but last year, it too died (just a few months out of warranty).
    One further question, if you don't mind. If I'm just going to replace the HD on the mini, I'm not sure why one would do this step that you suggested: "get a new HD, put it in an enclosure or use another method that allows the HD to be connect to the Min. Then boot to the recovery partition and install Mavericks on the new HD."
    Also, maybe I can replace the drive on the mini myself. Maybe get an SSD for it? They seem more reliable.
    Thanks again for taking the time to answer me.

  • Brand new hard drive failed - is it me?!

    Hello (Kate HS's other half here)
    I recently had to replace the HD on our iMac (the original one failed more or less on it's second birthday)
    I fitted a 250gb Hitachi drive about a month ago, restored data from backups and everything seemed great, until tonight...
    I was watching TV via Eye TV when the computer froze - and when i forced shut down and restarted I was greeted by a blinking question mark. Booted from Disk First Aid and it couldn't see the HD. Hardware test shows " 2STF/1/4 " error.
    Could it be that something other than HD could be causing this - or some other fault is destroying hard drives? (first time i had warning noises and regular crashes for a few days, this time there was nothing - instant death)
    Could I have done something wrong when fitting it?
    Or what are the odds of having 2 hard drives fail in the space of a month..?
    Hope you can help.
    iMac G5 20" 1.8Ghz   Mac OS X (10.3.9)  

    To Apple Discussions!
    Since your HD is only a month old it should still be under warranty. I would contact the manufacturer and/or get a new one.
    In case it's not the HD, see your computer comes under the following program since you have an 20" G5 iMac. Hopefully, it's a Rev B:
    The 20-inch iMac G5 Repair Extension Program for Power Supply Issues (Rev B)
    **WARNING: DUE TO SECURITY REASONS, PLEASE DO NOT POST YOUR COMPUTER'S SERIAL NUMBER ON THESE MESSAGE BOARDS.**

  • HT1751 My win8 pc hard drive failed.  After the hard drive was replaced, I copied iTunes Media backupfiles from external hard drive (Karen's Replicator was used).  ITunes does not recognize the back up files - help! (it does show cloud & recently burned m

    My win8 pc hard drive failed.  After the hard drive was replaced, I copied iTunes Media backupfiles from external hard drive (Karen's Replicator backup software was used).  ITunes does not recognize these back up files even though the location is the same as cloud & recently burned music that does show- help!  The backup files consist of 34,000+ songs; almost all burned from my own CD collection.  I do have most of the songs on an ipod classic but hesitate to try to restore from that.  Can someone tell me how to get these 34,000 songs to show up in iTunes?  Thanks!!

    This diagram shows how a typical iTunes library ought to be set out (click on it to enlarge)
    The red outline highlights the media folder and its contents, the various subfolders are only created if that kind of content is in your library. The right-hand side shows the files that should be found in the iTunes library folder; sentinel is normally hidden so may not be visible. The core of your iTunes library is the file iTunes Library.itl, you need to restore this, the other library files and the Album Artwork folder, as well as the media folder, to restore your library.
    tt2

  • My computer shows the grey screen that says i need to restart when i tray and boot from an external hard drive

    It shows the grey screen that i need to restart when i try to boot from an external hard drive. both drives have snow leopard

    Kernel Panics? Don't panic too!
    "You need to restart your computer" (kernel panic) message appears (Mac OS X v10.5, 10.6)

Maybe you are looking for

  • Setting up a small business network using mac and windows pcs

    Setting up a small business network using mac and windows??

  • Problem with opening of PDF in my webmail application

    I have a problem with opening a pdf file in my webmail application of my internet provider in apple safari since yesterday. When I wanted to open up a pdf file I got a pop up message to allow a connection between adobe and the webmail application whi

  • How to extend ECC6 tablespace? database is MSSQL

    Hello all, I intall ECC6 IDES, now I want to extend tablespace, but I didn't found command about brtools and sapdba, because my database is not oracle . how to do it? thank you. OS: WIndows 2003 SAP release: ECC 6 database: Microsoft MSSQL 2005

  • "systemroot\system32\ntdll.dll" error

    I try to reinstall window xp sp2 on my friend's computer today, boot up from the winxp cd, every thing is fine, but after the windows xp loading screen appears i get a blue screen with the this message : Stop : c000021 unknown hard error \ systemroot

  • Sunone Server console connectivity problem

    I am not able to connect directory server through console , getting following error message Cannot logon because of an incorrect userID, Incorrect password or Directory Problem HttpException: Response: HTTP/1.1 500 Server Error Status: 500 URL: http: