Hard drive failure - options for data recovery and AppleCare coverage

I have been handed a relative's 12 month old MacBook Pro with a factory-installed 500GB hard drive which appears to have failed. When attempting to boot the MacBook I am met with the classic clicking and grating noise which I know is a tell-tale sign of hard drive failure. The drive will not boot and I am shown the question mark folder icon, indicating that the operating system cannot be found. Have booted into internet recovery mode, Disk Utility appears to have found no sign of the hard drive's existence and shows none of its partitions. I have attempted putting the MacBook into FW target-mode and mounting the disk from another laptop, but to no avail; while it will go into target mode the drive simply isn't visible. The SATA connection to the drive is definitely OK - I have tested with another 2.5 inch hard drive which showed up fine in Disk Utility and was bootable. Have run Apple Hardware Test/Diagnostics but this returned no errors. It seems like a pretty clear cut case of drive failure.
I put this all to the relative whose laptop this is and asked them whether the MacBook had been dropped recently, explaining to them that this is one of the likeliest causes for such sudden failure. Sheepishly they admitted that they had indeed dropped it, although not from too great a distance and onto a carpeted floor. Apparently in the days immediately after the shock the hard drive continued to boot but the system was very slow and beset by spinning beech ball hangups. It is only in the last few days that the hard drive has become completely unbootable, and seemingly unreachable.
I have two questions that I would be grateful for some help with.
Firstly, is there any possibility of recovering data from this drive without going to a data recovery specialist? The user did have backups of most important data, but some recently imported photos were not backed up. Is it any use me trying any third-party data recovery software utilities, bearing in mind that I can't even mount the drive in target mode?
Second, the MacBook is still covered by the extended AppleCare warranty for the next two years. Is it worth my relative's while making a Genius Bar appointment to see whether Apple would replace this drive for free, given that the damage was most likely user-inflicted? Is there any chance that this sudden failure could be unrelated to the drop the MacBook suffered the other day - perhaps just a result of the 'normal' failure rate? I am more than happy to exchange the drive for a new one myself and my relative is happy to pay for the new part (I was amazed at how cheap hard drives are now), but would we be better off trying an Apple Store? My prediction would be that while we might get lucky and have an obliging genius who agrees to swap the drive without asking too many questions, we could also have one who concludes the damage is not covered by the warranty and insists on charging for the new hard drive (at a mark-up I assume) and labour.
Any thoughts about these two issues or the hard drive failure more generally are very welcome. Thanks.

1, Data recovery software is your only alternative if there is no backup. It may or may not be able to revoker anything from that hard drive. If it does then the only other choice is to go to a data recovery service. If have to go that route expect to pay for it, like $$$$.
2, Yes. They will at least tell him what the problem is and the cost if any to fix. There is a good chance they will fix it for nothing and only charge for data recovery if they can do it.

Similar Messages

  • IMAC Fusion Hard Drive failure, help with data recovery

    I've got a Late 2012 iMAC 27 Inches 3.4GHZ with a Fusion 3.1TB HDD. My machine has booting issue the past few weeks and when contacted through Apple Care UK, after a few over the phone diagnostics they wanted me to take the machine over to get the Hard Drive checked. I had transferred some of my vital data from another HDD a few days before that and did not have an up to date backup. When booked in they said the HDD will have to be replaced and they will migrate the data over. But when I collected the machine, they said they couldn't transfer data as 'it didn't mount' and therefore unable to transfer. I was gutted as I have 2 wedding on their which were WIP and had to be delivered to the client in a few days. I have got my old HDD from the apple store...but unable to read data..can you help? Guess as a final resort I'd have to obtain the expensive data recovery services.

    Ouch...
    But before going for an expensive data recovery service, you have some other options.
    At first you have to get that harddrive connected to your iMac. There are several solutions to that. One is to buy a SATA USB Docking Bay (see picture). You can put the harddisk in it and connect it via USB to your iMac.
    Next you'll need recovery software. Disk Utility will probably not help you, but it is worth the try (because it is free and comes with OSX).
    A great piece of software to look at is DiskWarrior. It once helped me accessing a dying External Harddisk and got most of the data off it before it really died. There are more applications, just google 'Data Recovery OSX', and you will find a lot more.
    Oh, and make sure to start a good back-up plan for the future. Time Machine is great, or Carbon Copy Cloner, and maybe invest in a decent NAS to copy your data on.
    Good luck!

  • Remove option for Data Tracking and Drill Mode

    Hi all
    We have integrated a bunch of Webi reports into the SAP Portal. My question is now how to remove the options about Data Tracking and Drill Mode in the top right hand corner? I guess it is some special right we need to deny in the Access Level, we have defined. But if I deny data tracking and drilling in the Web Intelligence section of the Access Level, it has no effect.
    Please assist.
    Best regards,
    Martin Søgaard

    I, too, am perplexed by this change. Then again, I've been perplexed by most of the changes Apple has made to products/os in the last few years. I'm thinking that I may not only change browsers, but hardware/software also. It's issues like this that make me wonder if anyone on the Apple design team actually uses any of their products, or maybe they think we are all just too ignorant to be able to use a computer.
    Making things simple to use shouldn't equate to removing advanced functionality, but it seems that's what Apple believes it to be.
    Really disgusted now.
    Thanks Apple.

  • Erasing Time Machine hard drive after formatting for both PPC and Intel

    Ok, I made a mistake. First I formatted a Western Digital 500 gig hard drive for both my wife's PPC G4 laptop and my own Intel MBP laptop, so we could both use Leopard's Time Machine for backing up to the same drive. That wasn't my mistake though, it's been working fine. I formatted my partition using the GUID option and hers using the Apple Partition Map option (I think that's what they are called, I'm going from memory).
    Here's my mistake: I needed some extra space to store some files and read that I could Re-Partition the drive without erasing anything using Disk Utility. Sounded great. I first tried to partition my wife's partition, since she had more extra space, but then I realized that was a bad idea since I had formatted her partition with using the Apple Partition Map, so I stopped and then tried to Re-Partition my side. It worked for about an hour: my Time Machine backup drive appeared, my new partition appeared, but then... her partition disappeared! Usually whenever one of us plugs in the hard drive using the firewire cable, both partitions appear, Time Machine Goes to work, and that's that. When we need to disconnect from the drive we have to eject both drives, but no big deal. Now her drive isn't appearing.
    So... I tried to repair it, no good. Tried to erase both her partition and mine (to just start over): no good. I can't do anything to either of these partitions now, from either computer. Tried everything I could think of in Disk Utility, from both computers. Won't erase, won't re-partition. Not a hardware issue: it all started when I did this stupid Re-Partition. Help!!!!
    I want to erase the drive and start over. Can anyone advise??

    Jasonmo,
    First, let's talk about the various partition schemes. A partition scheme applies to the entire drive. Specifically, these are different maps written to the drive, within which volumes are created. As such, this is an either/or thing; your drive is partitioned using either the GUID Scheme, or the Apple Scheme, not both.
    "Live" partitioning or re-sizing of existing volumes is supported only under the GUID Partition Scheme. If the drive wasn't using this scheme, you would not be able to re-size as you were attempting to do. Even re-sizing under the GUID scheme requires that the drive's maps and directory structures be in very good shape, if it is to work without hitch.
    Are you absolutely certain that there isn't some physical problem with the drive, or with its interface (cables and such)? If it is operating normally, you should be able to re-partition it without problems. In DIsk Utility, select the drive (not a named volume that will appear indented underneath), then click the "Partition" tab. If you wish to be able to re-size volumes later, you must choose the GUID scheme from the "Options..." dialogue sheet. Set appropriate sizes for the volumes, then click "Apply." Doing so will destroy all current volumes and data on the drive.
    Scott

  • A question on different options for data archival and compression

    Hi Experts,
    I have production database of about 5 terabyte size in production and about 50 GB in development/QA. I am on Oracle 11.2.0.3 on Linux. We have RMAN backups configured. I have a question about data archival stretegy.  To keep the OLTP database size optimum, what options can be suggested for data archival?
    1) Should each table have a archival stretegy?
    2) What is the best way to archive data - should it be sent to a seperate archival database?
    In our environment, only for about 15 tables we have the archival stretegy defined. For these tables, we copy their data every night to a seperate schema meant to store this archived data and then transfer it eventualy to a diffent archival database. For all other tables, there is no data archival stretegy.
    What are the different options and best practices about it that can be reviewed to put a practical data archival strategy in place? I will be most thankful for your inputs.
    Also what are the different data compression stregegies? For example we have about 25 tables that are read-only. Should they be compressed using the default oracle 9i basic compression? (alter table compress).
    Thanks,
    OrauserN

    You are using 11g and you can compress read only as well as read-write tables in 11g. Both read only and read write tables are the candidate for compression always. This will save space and could increase the performance but always test it before. This was not an option in 10g. Read the following docs.
    http://www.oracle.com/technetwork/database/storage/advanced-compression-whitepaper-130502.pdf
    http://www.oracle.com/technetwork/database/options/compression/faq-092157.html

  • Hard Drive Failure, so I've lost ITunes Library. Ipod more up-to-date how do I transfer music from IPod to library?

    Hi,
    I had a hard drive failure on my old PC and I couldn't retrieve anything.  I have purchased a new PC and downloaded itunes (Version I'm not use to which isn't helping) and signed in however it only has my purchased songs on the cloud which I need to download into my library from cloud. However I have thousands of songs that I imported into my old library from CD's etc which is no lost apart from all the data held on my ipod.
    So my Ipod is more up-to-date then my library now.  When I look to sync my ipod it says everything will be removed and will be replaced with content from the library.  I've had a look around and I can't see a way to get my music from my ipod to my library.
    Is there anything I can do, please help?
    Thanks

    See:
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
    or
    Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

  • Sync after hard drive failure.

    Im at my wits end-I really am. Why on earth is I Tunes so chuffin awkward.
    Right after a hard drive failure I've now gone and purchased a refurb desktop. Fortunately on my previous I Tunes library the default location for the library was on an external hard drive.
    Following the simple instructions I transferred that music folder onto my desktop and into a folder called I Tunes Library. I then dragged and dropped that folder into I Tunes.
    I attempted to sync my I Pod but the error message was stated there was not enough room on my I Pod Touch. I found this curious because my entire I Tunes library only amounted to 47gb and my touch is 60gb.
    I found out the reason for this was because some of the the library I had imported from my external hard drive had duplicated some of the music thus making my library larger than 60gb.
    As I Tunes doesnt allow you to sync from your touch to a new I Tunes library (why???Grrrr) I completed a factory reset wiping all of my music and once again tried syncing from I Tunes.
    To my horror about a third of the library has duplicated and even after manually removing those duplicates and a lot of my music is missing from I Tunes HOWEVER on my external hard drive that missing music is showing there?
    Can anyone help??

    Hi!
    It seems that your iPhone is properly connected to the Sync server and that you need to add your computer to your previous account. In order to do so:
    # At the top of the Firefox window, click on the Firefox button (Tools menu in Windows XP) and then click Options. . In the Options window, click on the Sync tab.
    # Click Set Up Firefox Sync
    # Under I already have a Firefox Sync account click Connect and then select "I don't have the device with me" just below the three boxes.
    If you have already created a new account in your computer and you want to log in with your Firefox Home application, "Sign out" and set up the application again. The data you are going to lose is the one in Firefox Home. If you have restored the information in your desktop browser the data will appear in your iPhone once the sync is done.
    Unfortunately, Firefox Home doesn't have the ability to send the bookmarks stored there to your computer so if you need to restore them in your computer and you don't have the Sync Key to restore the account in your computer, your only option is to copy them manually.
    I hope this information helps you.

  • Data Recovery After Hard Drive Failure!

    Ok, basically, I've got a 2 1/2 year old iBook G4 with a bombed hard drive, and unfortunately, the last time I backed up was around 3 months ago. Here's what happened right before the crash: some applications like Widgets and Safari were acting fluky, and it wouldn't let me open Word documents, so I restarted, because I thought it might have something to do with the fact that i had downloaded the new version of itunes not that long ago and hadn't restarted since. well, when i restarted, the gray screen with the wheel and the apple symbol went on for a really long time, and then the blue screen came up with the cursor, but nothing else happened, and the blue screen just stayed there. as far as i know, the hard drive wasn't making any unusual noises, just the usual occasional soft sounds that my hard drive has always made (there are usual sounds, right?) a piece of information that might be useful is that the hard drive was almost full (it only had about 5 GB left, which i understand is how much you should leave) could this have caused the failure maybe? anyway, i tried using the hard drive as a target and tried getting another computer to recognize it and pull the files off, but that didn't work. so, i brought it into the apple store, and they got it to boot up but using some external hard drive, i think. they tried disk utility, but that didn't see my hard drive. then the tried disk warrior, and that saw it and repaired it or something, but then it couldn't get the drive to mount. so, i'm assuming that because disk warrior didn't work and couldn't get it to mount, then other software like data rescue, etc... won't either. like all computer users, i've got some REALLY REALLY important data on there, and all the data recovery places i've gotten quotes from are pretty pricey. if the drive doesn't require physical data recovery, only non-physical, as i hope, the cheapest is still $350. even so, the person on the phone there didn't seem to know nearly as much as the people at the more pricier places. so, are there any other options besides expensive data recovery? i read something about using dd - a unix thing, but i don't know the first thing about it (http://www.macosxhints.com/article.php?story=20050302225659382) so i'm not sure i want to risk messing it up even more. and, if worse comes to worst, then i'll use a data recovery place... but can anyone tell me if they've used any of the data recovery companies below, and which ones are good?
    (first three do evaluation for free, and then you decide if you want to continue based on more accurate price idea)
    MacintoshDataRecovery.com
    $500 non physical
    $1100-1600 physical
    Heroic Efforts
    http://www.heroicdata.com/data_recovery
    $350 non physical
    ships to another (very expensive) place if physical
    ACS Data Recovery
    http://www.acsdata.com/index.htm
    $600-700 non physical
    DriveSavers.com
    (recommended by Apple, probably the best, but the most steep, too)
    could cost anywhere from $500-$2700 and $200 evaluation fee even if data is unrecoverable
    Since this is our fourth hard drive failure in four different iBooks in 2 1/2 years, i am starting to become seriously disillusioned about the quality of the hardware Apple uses...not that i would ever get a dell or anything, but still....
    THANK YOU in advance for any tips you might be able to offer, and also for reading this extremely long post!
    katie
    iBook G4   Mac OS X (10.4.3)  
    iBook G4   Mac OS X (10.4.3)  

    I have read good reports concerning Data Rescue although I have not used it myself.
    Once you get your data back, focus on a regular (even daily) backup routine, because as you know only so well, the question is not if a drive will fail, it's when.
    My condolences, by the way.

  • Hard Drive Failure on HP DV 6000 Pavilion laptop Windows-XP​sp3 OS - Need Data Recovery Help

    Hard Drive Failure on HP DV 6000 Pavilion laptop - Need Data Recovery Help
    HP Pavilion DV 6108 NR, RG365UA, purchased in late 2006 at Best Buy, with Windows XP, upgraded to Service Pack 3. It has a Fujitsu hard disk, 60 gigabyte, partitioned into C: and a Recovery D:.
    Windows tries to boot up, but goes to blue screen with the message: "Unmountable Boot Volume" for one second, then just keeps recycling until I force a shutdown.
    BIOS Phoenix, hard drive test result: " #1-08 Fail "
    I ran a disk analysis/recovery program on the Cdrive and it seemed to show the directory structure intact, and it was able to recover some files. I was using the free one from Seagate (which only recovers small files). The second pass didn't run so well, and during the third run the program said I should not proceed further, and I should contact a professional disk recovery company.
    However, the D drive seems to be intact, so, I wonder if the disk is corrupted or just some aspect of the logical C drive is bad.
    How can I get the D: to run the recovery software on it? The recovery disks, made by Best Buy, only proceed to the R / F / Q option screen, and when I press R, I get a blue screen every time.
    Tapping the F10 key during startup gets me nowhere. Ditto the F11 key.
    I dont care about the hard disk; it is the data (files, docs, images, etc)  that I want.
    I contacted HP to order recovery disks but they are no longer available for my computer.
    Any suggestions would be greatly appreciated!
    Jon
    This question was solved.
    View Solution.

    Update...
    I found a website that offers the following:
    http://www.computersurgeons.com/p-13442-recovery-k​it-435422-001-for-hp-model-number-dv6108nr.aspx
    Recovery Kit 435422-001 For HP Model Number dv6108nr
    Price: $27.00
    Recovery Kit Set (An Entire Image of the Computer hard drive when the computer was new)
    But I wonder how useful it would be. Early XP , no doubt. And if my hard disk problem is a mechanical fault, would any recovery disk even work? The disks made by Best Buy when I bought mine new in 2006 don't do anything more than go to the R /F/ Q screen and then goes to a blue screen when I press R (to recover the OS and apps and data files). And, as I wrote, it is the data that I want, not the disk drive.

  • Mountain lion install failed due to hard drive failure. It said I needed to repair the disk and I was taken to the lion recovery menu.

    Unfortunately, and quite idiotically, I never made a back up of my files and the lion operating system before trying to upgrade. My main concern now is just making sure none of my files were lost because of the install failure. I don't know what to do from here because I'm afraid to make a mistake and never be able to recover them again. What can I do to restore my computer back to normal? When I look under Macintosh HD in the Disk Utility option on lion recovery, it seems as if it recognizes that all of my files are still intact, because about 200 GB out of 319 GB are used up on it. This correlates to the amount of files on my disk. Pleaseeee tell me I didn't just lose all of my files. Any help will be greatlyy appreciated!
    Sincerely,
    Mathew Smith

    You only need the powered exernal drive, OS X reinstall is free to install on the external drive.
    Hold the option key and boot from the extenral drive.
    When OS X upgrades or installs (without a disk wipe first), it doesn't touch Applications and User account folders (only Apple programs) so as long as the drive and file system works, (even if OS X doesn't boot on that drive) the files can be recovered via normal drag and drop methods.
    If you can't access the files normally, only then you will have to install Data Rescue on the external drive (another $100) to read the 1's and 0's of the non-encrytped files directly, bypassing the file system structure. Thus is the price for not making adequate backups.
    Most commonly used backup methods
    In some major cities where there is a lot of computer tech support competition, you might be better with a local PC/Mac data recovery and restore service, saving you some money. But with the extenral hard drive you can then later make that a TimeMachine or clone drive, which you need anyway regardless.

  • MacBook Pro hard drive failure- data recovery possible?

    Hi everyone, I have a June 2009 MBP that stopped turning on the other day and it just sits on a gray screen when trying to boot up. I had it taken in to a small little authorized Apple repair shop since I am living out in BFE and they said it has a hard drive failure which is causing the problems. They said there is no way to recover the data. Is that right? I'd imagine there has to be someway to recover it. Is there somewhere I can send it in or something? At this point even if it were to cost a lot I'd like to get the data off of it if there is the possibility.
    Inb4: should've backed it up!

    You may be able to boot from an external hard drive and repair the disk enough to copy the data from it, even if it will no longer boot. There are a number of hard drive recovery services. Apple even lists a couple of them (http://support.apple.com/kb/HT3974) that are authorized to recover data from hard drives without voiding the warranty. The warranty is not an issue with a machine from 2009, but those are high quality, reputable companies.
    Most such companies have you send them the hard drive and they will give you an estimate of how much it will cost to recover the data, if possible. Some people have reported that Data Rescue 3 comes with a coupon for free diagnostics and $100 off data recovery from The Data Rescue Center. That was a couple of years ago. I don't know if the same deals are in place now.

  • HT1661 My mid-2009 MacBook Pro has just died via a painful (for me) hard drive failure. I backed up a good percentage of files recently but not enough to keep me happy.  I need to access the dead drive on the MBP via a 2008 iMac. Best options?

    My mid-2009 MacBook Pro has just died via a painful (for me) hard drive failure. I backed up a good percentage of files recently but not enough to keep me happy.  I need to access the dead drive on the MBP via a 2008 iMac. Best options?
    I have ordered a 800 firewire to 800 firewire cable and am hoping to use the target mode option to copy files from the MBP.
    Is this possible?
    Hope so!
    Any advice and or help would be greatly appreciated.
    Many thanks,
    Neil

    Thanks Ogelthorpe.
    Just bought an enclosure to try that also.
    Hoping the MBP isn't really dead but just feigning death
    Fingers crossed.

  • Can i restrict apple mail client from downloading all emails...and allow it to pick a start date for gmail mail to sync? i am flooded with old emails, thousands on them ...eating hard drive space of my macbook pro and un necessary overhead

    can i restrict apple mail client from downloading all emails...and allow it to pick a start date for gmail mail to sync? i am flooded with old emails, thousands on them ...eating hard drive space of my macbook pro and un necessary overhead

    The genius bar technicians can check your MBP for possible hardware problems and specific software issues that you may have.  The diagnosis will be free.  Any extensive repairs will not be free.
    If you have minor software problems, you essentially will have to deal with them yourself.  Examine these two comprehensive documents for possible problem definition and solutions.  If you encounter problems that you are unable to cope with, start a new discussion and there will be persons willing to assist you in solving them.
    https://discussions.apple.com/docs/DOC-3521
    https://discussions.apple.com/docs/DOC-3353
    Ciao.

  • Hard Drive Failure on HP DV 6000 Pavilion laptop (dv6108nr) with Windows-XP​sp3 OS - Need Data Recov

    Hard Drive Failure on HP DV 6000 Pavilion laptop - Need Data Recovery Help
    HP Pavilion DV 6108 NR, RG365UA, purchased in late 2006 at Best Buy, with Windows XP, upgraded to Service Pack 3. It has a Fujitsu hard disk, 60 gigabyte, partitioned into C: and a Recovery D:.
    Windows tries to boot up, but goes to blue screen with the message: "Unmountable Boot Volume" for one second, then just keeps recycling until I force a shutdown.
    BIOS Phoenix, hard drive test result: " #1-08 Fail "
    I ran a disk analysis/recovery program on the Cdrive and it seemed to show the directory structure intact, and it was able to recover some files. I was using the free one from Seagate (which only recovers small files). The second pass didn't run so well, and during the third run the program said I should not proceed further, and I should contact a professional disk recovery company.
    However, the D drive seems to be intact, so, I wonder if the disk is corrupted or just some aspect of the logical C drive is bad. Or does the disk have a mechanical failure, in which case, is a recovery disk even helpful at all?
    How can I get the D: to run the recovery software on it? The recovery disks, made by Best Buy, only proceed to the R / F / Q option screen, and when I press R, I get a blue screen every time.
    Tapping the F10 key during startup gets me nowhere. Ditto the F11 key.
    I dont care about the hard disk; it is the data (files, docs, images, etc) that I want.
    I contacted HP to order recovery disks but they are no longer available for my computer. (But see below, "UPDATE")
    Any suggestions would be greatly appreciated!
    Jon
    ===============================
    UPDATE:
    I found a website that offers the following:
    www.computersurgeons.com/p-13442-recovery-k​it-435422-001-for-hp-model-number-dv6108nr.aspx
    Recovery Kit 435422-001 For HP Model Number dv6108nr
    Price: $27.00
    Recovery Kit Set (An Entire Image of the Computer hard drive when the computer was new)
    But I wonder how useful it would be. Early XP , no doubt. And if my hard disk problem is a mechanical fault, would any recovery disk even work? The disks made by Best Buy when I bought mine new in 2006 don't do anything more than go to the R /F/ Q screen and then my computer goes to a blank blue screen when I press R (to recover the OS and apps and data files). And, as I wrote, it is the data that I want, not the disk drive.
    Any help here would also be appreciated!
    Jon

    Hi @goshenguy
    Thank you for your inquiry, I am happy to help.
    I grasp you tested the hard drive from the bios and it failed.  This tests the physical aspcects of the hard drive and when it fails it does require replacement.  You were able to retrieve some of your files using recovery software but not all.
    Your recovery partition is still intact and when you try to do a recovery with the disks from Best Buy you do not get past these options R / F / Q  but will not proceed.
    Here is a link to Performing an HP System Recovery (Windows XP, 2006 or Later) that may assist you in performing a recovery.
    Here is a link to the Maintenance and Service Guide HP Pavilion dv6000 Notebook PC. Please note chapter 3 page 42 for a replacement hard drive part number. 
    HP Parts, HP Replacement Parts
    If you are still unable to do the recovery, you could try contacting Best Buy for assistance with the recovery kit they provide.
    I don't know if it is possible, but you may want to check cloning software to see if you could clone the D partion to the new drive or connect both drives and  try a drive to drive copy of the D partition.
    If you were able to successfully put the D partition on a new hard drive you should be able to do a recovery from the  D partition  to take it back to factory.
    If none of the above has allowed you to successfully do a recovery, I suggest contacting Best Buy to see it they have  options other then purchasing  a  third party recovery kit. 
    Good Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • After hard drive failure, need to sync data

    Following a hard drive failure I need to re-establish syncing between my desktop and Firefox Home on my iPhone. None of the routines for "add a device" or "my account" seem to work as advertised. "Settings" on my iPhone shows me signed in but gives me no other options, e.g., the option to open my account. The only buttons on the "Settings" page are "Sign Out," "About," and "Refresh." "Sign Out" warns me that doing so will erase all my data on the iPhone. Any suggestions how to re-establish Firefox Home appreciated.

    Hi!
    It seems that your iPhone is properly connected to the Sync server and that you need to add your computer to your previous account. In order to do so:
    # At the top of the Firefox window, click on the Firefox button (Tools menu in Windows XP) and then click Options. . In the Options window, click on the Sync tab.
    # Click Set Up Firefox Sync
    # Under I already have a Firefox Sync account click Connect and then select "I don't have the device with me" just below the three boxes.
    If you have already created a new account in your computer and you want to log in with your Firefox Home application, "Sign out" and set up the application again. The data you are going to lose is the one in Firefox Home. If you have restored the information in your desktop browser the data will appear in your iPhone once the sync is done.
    Unfortunately, Firefox Home doesn't have the ability to send the bookmarks stored there to your computer so if you need to restore them in your computer and you don't have the Sync Key to restore the account in your computer, your only option is to copy them manually.
    I hope this information helps you.

Maybe you are looking for