Hard drive glitches after battery replacement... normal?

Hello, I have a 4Gen 20gig ipod with click wheel and I just replaced the battery myself last night.
I then plugged it into my computer to sync and it was recognized by windows, but not by iTunes, the hard drive would whir, then click and then try again, then stop. I figured it was just that the battery wasn't charged enough yet, so I let it charge overnight.
In the morning it synced fine. I was then playing it in the car, and some songs would appear, then the hard drive would whir, click a couple of times, then skip on to the next one. After a couple songs it started playing them normal. After skipping a few and the hard drive spun to load more music into the temporary memory, it would whir, click and then skip the song, then whir click and skip that one too... and it kept doing it. Then I reset it, and it kept showing the apple symbol, then the Exclamation and folder icon, then tried restarting again. After trying to reset itself 4 or 5 times, it finally succeeded.
I read a few threads on here, gave the ipod a gentle nudge on the right hand corner a few times, and now its playing and I haven't had any symptoms yet for about an hour.
Is this normal for a hard drive on an iPod to glitch after a battery replacement? I had no such problems when I had the other battery in it, so it's hard to believe that the hard drive is going bad exactly at the same time I changed batteries. It is the right battery for the right iPod, anyone else experience this or have any words of wisdom or comfort?

rsherid wrote:
Pretty fast and non-stop, even when I'm not working. Could it be dirty? Is there a way to clean it?
Does the Apple store charge just to look at something?
Even if the noise was a dirty hard drive you can't clean the innards of one. You cannot even open one. Well you can, once.

Similar Messages

TS1372 I replaced the hard drive, motherboard, and battery but now can not restore my Ipod 5th gen? Error code 1416, any help?

I replaced the hard drive, motherboard, and battery but now can not restore my Ipod 5th gen? Error code 1416, any help?

When I did a Google search on "1416 error ipod 5th," there is some discussion that the earlier version of the logic board only accepted 30 and 60 GB drives (or words to that effect), but the later "5.5" version did allow larger capacity drives. If that info is true, the question is, do you have a compatible combination of logic board and hard drive?

In replacing a hard drive on a Mac book circa 2006, can you put too much hard drive space in and cause overheating? I've had 2 hard drives fail after installation in the past 3 weeks.

I recently had my Mac book circa 2006 updated to OS Lion and in the process was told I needed a new hard drive. I just replaced my original hard drive 9 months ago and was told at that time not to put too large a hard drive on my laptop or it could overheat. Now I have gone through 2 hard drives in the past 3 weeks since updating to Lion both of which were a terabyte in size. The authorized repair shop that put both failed hard drives in insists that the size of the hard drive does not cause problems in the Mac book but I am wondering why 2 failed in such a short time when the smaller hard drive lasted. It was working when I took it in for the updates but their diagnotic test showed that the first replacement HD was failing. I'm not sure what to think now.

Can I take that cloned hard drive and just plug it into my new Mac Mini and Viola I have two computers set up perfectly
Yes.

How do i know which hard drive to buy to replace my macbook 13"

how do i know which hard drive to buy to replace my macbook 13"

Any 2.5" form factor SATA drive will work.
For a new hard drive try Newegg.com http://www.newegg.com/Store/SubCategory.aspx?SubCategory=380&name=Laptop-Hard-Dr ives&Order=PRICE
Or OWC for regular hard drives and SSDs http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
Here are instructions on replacing the hard drive in a MacBook with a removable battery. http://creativemac.digitalmedianet.com/articles/viewarticle.jsp?id=45088
Here are video instructions on replacing the hard drive on the Aluminum Unibody
http://eshop.macsales.com/installvideos/macbook_13_unibody/
Here are video instructions on replacing the hard drive on the White Unibody http://eshop.macsales.com/installvideos/macbook_13_09_unibody_hd/
To transfer your current hard drive I like the free application SuperDuper. It makes a bootable copy of everything on your hard drive http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html You'll need a cheap SATA external hard drive case. Put the new drive in the case then format and partition the new drive and clone your old drive to the new one. Check that it's set up right by booting up from the external drive. Then replace your old hard drive with the new one and put your old one in the external case.
Here's a cheap SATA external hard drive case on Amazon http://www.amazon.com/Vantec-NexStar-2-5-Inch-External-Enclosure/dp/B002JQNXZC/r ef=pd_cp_pc_0
If you don’t have the tools to open up the MacBook OWC has a set for $5
http://eshop.macsales.com/item/OWC/TOOLKITMHD/

My iMac Seagate 1T hard drive crashed. I replaced it with a Western Digital 1T hard drive. Where can I get the Lion OS?

My iMac Seagate 1T hard drive crashed. I replaced it with a Western Digital 1T hard drive. Where can I get the Lion OS?
The iMac comes up with a ? in a folder, even after starting with Option/Command/R keys pressed.
Please help.

Call Apple to purchase replacement discs or order a copy of Snow Leopard from Apple's Online Store. Follow these instructions:
Drive Preparation and Install Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. When completed quit DU and return to the installer. Install Snow Leopard. Once you boot from Snow Leopard you should open Software Update and install all the available updates required. After you complete this and restart the computer open the App Store application in the Dock or Applications folder.
8. Sign into the App Store with your Apple ID and password. Purchase and download Lion.
9. After Lion's installer downloads, install Lion.

I had backed up my I-tunes files to an external hard drive but after my computer crashed when I try to reload from the hard drive the message comes up saying I-tunes library cannot be read because it was created by a newer version. Help please!

I had backed up my I-tunes files to an external hard drive but after my computer crashed and I restored it when I try to reload from the hard drive the message comes up ""I-tunes files cannot be read because it was created by a newer version of I-tunes". Help Please

Upgrade the version of itunes on the new computer
Itunes.com for free download.
Peace

I bought Creative suite 5 a few years ago, my computer's hard drive failed, after It was fixed I re installed my program and it now says my Serial number is not valid.

I bought Creative suite 5 a few years ago, my computer's hard drive failed, after It was fixed I re installed my program and it now says my Serial number is not valid.
I'm on the last day of a 30 day trail... it won't take my serial number which is the same one that worked before

Contact support by web chat.
Mylenium

My hard drive needed to be replaced for my iMac. When I move the photos from my portable hard drive back into iPhoto, the pictures show up small and I can't adjust them. How do I fix the pictures so they are full size again?

My hard drive needed to be replaced on my iMac. When I try to move the photos from my portable hard drive back onto the Mac, they are small and can't be edited or made any larger. How can I fix them?

YOu restore your phone from your icloud backup.
http://support.apple.com/kb/HT1766

TS1367 my laptop will not boot up from the storage hard drive but if i remove it from the laptop and connect it as portable hard drive my laptop boot up normal?

my laptop will not boot up from the storage hard drive but if i remove it from the laptop and connect it as portable hard drive my laptop boot up normal?

Do you have a compatible OSX installed on this 'storage' HDD? If not, it will not boot your MBP.
Ciao.

Acrobat Pro 9 for mac won't launch, reloaded from disk when hard drive needed to be replace. It's in applications folder but there is an X on the Acrobat Reinstall icon. What should I do.

Acrobat Pro 9 for mac won't launch, reloaded from disk when hard drive needed to be replace. It's in applications folder but there is an X on the Acrobat Reinstall icon. What should I do.

Hi Janice,
What version of Mac OS are you using?
Adobe does not recommend migrating the software from one disk to the other.
Please run the setup file for Acrobat and reinstall the software. You might want to delete the existing version of Acrobat installed before reinstalling it.
Regards,
Rave

When I use Preview,Photo Mechanic and Pages, all JPEG or RAW images appear corrupted. I thought my hard drive was failing and replaced it and migrated everything over but the problem still exists. Any idea what is going on?

When I use Preview,Photo Mechanic and Pages, all JPEG or RAW images appear corrupted.
I thought my hard drive was failing and replaced it and migrated everything over but the problem still exists.
It felt as if maybe a virus was at work but I ran Sophos and found nothing.
I store images on my Drobo Raid system but when I work from my Macbook Pro I have no issues, just on the tower.
Any idea what is going on?

First of all, why did you say yes to Nero Back up before researching what it does with files already on the HDD? When I install Nero, the Back Up is the first thing I disable, it is a nagging pain, there are much better backup programs available. There are several file recovery programs out there to recover deleted files, that is, if that is what happened. Also, if you haven't overwritten the files, so you should be able to find them.

My hard drive failed, has been replaced, and now it won't boot to CD.

My hard drive failed, has been replaced, and now it won't boot to CD to install the OS package. It would boot for a while, get through the first cd of install and would stop randomly in the next install. I found out that the installation disk was cracked so I went out and purchased the Mac Box Set which includes Mac OS X Snow Leopard, iLife '09 and iWork '09 under advisement from an associate at the local apple store. Now, I try installing this new OS disk and all I get is the apple logo without a spinning wheel for about 10 minutes and the computer restarts and does it again. I have tried booting from disk, holding c while starting up, and in safemode, holding shift while booting. Please help save my poor poor macbook!!!

These errors look like corrupt or missing files that leopard requires. It sound like you need to start from scratch: format your drive, reload Leopard. I realize that this is probably what you are trying to do.
If you cannot boot from install DVD and cannot successfully get into Safemode or Single usermode (due to a corrupt or incomplete install) then you will need another computer to assist you.
If you can get it into Target Disk Mode and have another Mac you could plug it into that Mac and reformat it.
If it will not go into TDM then you may need to take it out and put it into an external enclosure to plug into another Mac to format it.

HT201250 Hi, I had updated folder on my hard drive wich was wrongly replaced with a folder from my external drive. I m not using time machine. How can i recover that updated folder? (it was done on 3-5-12)

Hi, I had updated folder on my hard drive wich was wrongly replaced with a folder from my external drive. I m not using time machine. How can i recover that updated folder? (it was done on 3-5-12)

If the folder was replaced, it was written over.
Nothing short of forensic data recovery (probably involving taking the drive apart to scan the discs seperately) is going to recover anything (if indeed even that will).

Imac hard drive died and was replaced by apple. Data lost but is remains on ipads. Computer address is different so can't sync without erasing ipad data (which I need back on repaired imac). How do I do this?

How do I transfer data from and Ipad/iphone to an imac with a different address then initally setup with? Our hard drive died and was replaced free of charge by Apple, our data was lost on the hard drive but exists on our small devices.

Since Apple replaced the hard drive does that mean you have AppleCare? If so, call them. If not, you must have paid pretty good to get it replaced and so I would think you have some possible right to ask a followup question at the store that did it.

IPhone 5 keeps turning off after battery replacement

iPhone 5 keeps turning off after battery replacement. After 10 minutes or so, the phone freezes and shuts off, can't even use it anymore.

Hi there Luke811813,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
1.Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
2.Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
3.Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
4.After at least 15 minutes, if:
•The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
•The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
•Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
5.If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
•If the display turns on, go to step 4.
•If the display remains black, go to next step.
6.Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
7.If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Issue not resolved
My issue is still not resolved. What do I do next?
Contact Apple Support.
-Griff W.

Hard drive glitches after battery replacement... normal?

Similar Messages

Maybe you are looking for