Hard drive is running very hard and warm

I recently had a hard drive issue with my mac book pro and basically had to erase everything and then restore all my files from Carbonite. I have now restored all of my files and I think Carbonite is now rebacking those up, but in the mean time my hard drive is running very hard and causing my lap top to get very warm. Is this normal? Is it because of the back up/restore? Or is there something wrong with my fan or hard drive?

Install iStat pro (from the Internet) and open it.  It will show you the internal temperatures of your MBP and the fan speeds.  Also open Activity Monitor to compare the internal CPU activity with the iStat pro data.  Post both for an evaluation.
Since you have suspicions regarding your HDD, make certain that you do have backups.  You might open Disk Utility>First Aid and 'Verify Disk'.
Ciao.

Similar Messages

  • My MacBook pro is running very slow and unresponsive.

    My MacBook pro is running very slow and unresponsive. I have mid 2010 model running on lion. Past few days it looks very unresponsive. Tried to reinstall lion as clean copy. Still no luck. Any help on this is much appreciated !
    My model has 4 gb ram.

    Things That Can Keep Your Computer From Slowing Down
    If your computer seems to be running slower here are some things you can do:
    Boot into Safe Mode then repair your hard drive and permissions:
    Repair the Hard Drive and Permissions Pre-Lion
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    Repair the Hard Drive - Lion
    Boot from your Lion Recovery HD. When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Restart your computer normally and see if this has helped any. Next do some maintenance:
    Suggestions for OS X Maintenance
    For situations Disk Utility cannot handle the best third-party utility is Disk Warrior;  DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
    OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.  Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger.  These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
    OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
    I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
    For emergency repairs install the freeware utility Applejack.  If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line.  Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
    When you install any new system software or updates be sure to repair the hard drive and permissions beforehand.
    Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
    Carbon Copy Cloner
    Data Backup
    Deja Vu
    SuperDuper!
    SyncTwoFolders
    Synk Pro
    Synk Standard
    Tri-Backup
    Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
    Additional suggestions will be found in Mac Maintenance Quick Assist.
    Referenced software can be found at CNet Downloads or MacUpdate.
    Additional Hints
    Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
    Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
    Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
    Check for applications that may be hogging the CPU:
    Open Activity Monitor in the Utilities folder.  Select All Processes from the Processes dropdown menu.  Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time, then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.
    Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file.

  • HT1338 XSERVE 10.6.8 is running very slow, and Workgroup Manager is not responding

    XSERVE 10.6.8 is running very slow, and Workgroup Manager is not responding. There is no more updates to download.

    munish khanna wrote:
    1. upgrade to lion, which should over write previous software and the reasons for it being slow.
    No, you don't want to upgrade over a buggy system, Lion has issues of it's own that will only complicate matters, plus Lion is slower than Snow Leopard.
    Learn all the pitfalls before you upgrade to Lion, like all your Rosetta/older programs will no longer work and more.
    Leave Lion for a new hardware purchase is my advice, it's still got plenty of security and other issues.
    For your performance, your likely better off replacing the hard drive with a 7,200 RPM model and maxing the RAM, download the free MacTracker to find out your specs, and OtherWorld Computing is good for videos, tools and parts.
    http://eshop.macsales.com/installvideos/
    2. Format the hard disc and reinstall snow leopard.
    That will work, provided your data is off the machine first.
    Now how do i reinstall snow leopard as it was an online purchased upgrade from leopard.
    The 10.6 Snow Leopard disk that you upgraded 10.5 Leopard from actually has the full OS X 10.6 on it.
    All you have to do is stick the disk in and hold the c key down while booting, use Disk Utility to erase the entire drive, quit and install 10.6.
    Of course your not going to get the free iLife that came with the 10.5 grey disks, see if you can first install 10.5 with the same methods, then setup with the same user name as before, then upgrade to 10.6
    I think Apple nulled booting off the 10.5 disks, but it won't hurt to try.
    Another method would be to install 10.6 fresh by itself, then use the program called Pacifist to extract iLife from the 10.5 disks.
    http://www.charlessoft.com/
    Read here for plenty of how to's
    https://discussions.apple.com/message/16276201#16276201

  • My MacBook Air is running very slowly and has difficulty staying connected to wifi networks.

    Problem description:
    My mac is running very slowly and I have difficulty staying connected to wifi networks. I have only used half of my hard drive. My computer was purchased in Canada, where I used it for over a year but now I am living in the US.
    EtreCheck version: 2.1.5 (108)
    Report generated January 11, 2015 at 5:56:14 PM MST
    Click the [Support] links for help with non-Apple products.
    Click the [Details] links for more information about that line.
    Click the [Adware] links for help removing adware.
    Hardware Information: ℹ️
      MacBook Air (13-inch, Mid 2011) (Verified)
      MacBook Air - model: MacBookAir4,2
      1 1.7 GHz Intel Core i5 CPU: 2-core
      4 GB RAM Not upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1333 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1333 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en0: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 3000 - VRAM: 384 MB
      Color LCD 1440 x 900
    System Software: ℹ️
      OS X 10.10.1 (14B25) - Uptime: 0:31:38
    Disk Information: ℹ️
      APPLE SSD SM128C disk0 : (121.33 GB)
      EFI (disk0s1) <not mounted> : 210 MB
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      Macintosh HD (disk1) / : 120.10 GB (59.92 GB free)
      Core Storage: disk0s2 120.47 GB Online
    USB Information: ℹ️
      Apple Inc. FaceTime Camera (Built-in)
      Apple Inc. BRCM20702 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Internal Memory Card Reader
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /Applications/Splashtop Streamer.app
      [not loaded] com.splashtop.driver.SRXDisplayCard (1.6 - SDK 10.7) [Support]
      [not loaded] com.splashtop.driver.SRXFrameBufferConnector (1.6 - SDK 10.7) [Support]
      /System/Library/Extensions
      [loaded] com.Cycling74.driver.Soundflower (1.6.6 - SDK 10.6) [Support]
      [not loaded] com.avatron.AVExFramebuffer (1.7 - SDK 10.8) [Support]
      [not loaded] com.avatron.AVExVideo (1.7 - SDK 10.8) [Support]
    Launch Agents: ℹ️
      [loaded] com.google.keystone.agent.plist [Support]
      [not loaded] com.splashtop.streamer-for-root.plist [Support]
      [loaded] com.splashtop.streamer-for-user.plist [Support]
      [not loaded] com.teamviewer.teamviewer.plist [Support]
      [not loaded] com.teamviewer.teamviewer_desktop.plist [Support]
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist [Support]
      [loaded] com.google.keystone.daemon.plist [Support]
      [loaded] com.leapfrog.connect.authdaemon.plist [Support]
      [loaded] com.microsoft.office.licensing.helper.plist [Support]
      [running] com.splashtop.streamer-daemon.plist [Support]
      [loaded] com.splashtop.streamer-srioframebuffer.plist [Support]
      [not loaded] com.teamviewer.teamviewer_service.plist [Support]
    User Launch Agents: ℹ️
      [loaded] com.adobe.ARM.[...].plist [Support]
      [running] com.leapfrog.connect.monitor.plist [Support]
      [loaded] com.splashtop.streamer-for-user.plist [Support]
    User Login Items: ℹ️
      iTunesHelper ApplicationHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
      AirDisplayStatusItem Application (/Library/PreferencePanes/Air Display Preferences.prefPane/Contents/Resources/AirDisplayStatusItem.app)
      Dropbox Application (/Applications/Dropbox.app)
      ScreenCapture Application (/Library/PreferencePanes/Air Display Preferences.prefPane/Contents/Resources/ScreenCapture.app)
      Google Drive Application (/Applications/Google Drive.app)
      Google Chrome ApplicationHidden (/Applications/Google Chrome.app)
      WDQuickView Application (/Incompatible Software/WDQuickView.app)
    Internet Plug-ins: ℹ️
      NPDjVu: Version: 6.1.1 [Support]
      o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
      Google Earth Web Plug-in: Version: 5.2 [Support]
      Default Browser: Version: 600 - SDK 10.10
      Flip4Mac WMV Plugin: Version: 2.3.5.4 [Support]
      PrintDialogExt: Version: 6.1.1 [Support]
      AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Support]
      FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
      Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Support]
      Flash Player: Version: 16.0.0.235 - SDK 10.6 Cannot contact Adobe
      QuickTime Plugin: Version: 7.7.3
      googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
      SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Support]
      AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Support]
      DirectorShockwave: Version: 11.0.3r470 [Support]
    User internet Plug-ins: ℹ️
      CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Support]
    3rd Party Preference Panes: ℹ️
      Air Display Preferences  [Support]
      Flash Player  [Support]
      Flip4Mac WMV  [Support]
    Time Machine: ℹ️
      Time Machine not configured!
    Top Processes by CPU: ℹ️
          6% WindowServer
          0% fontd
          0% Dropbox
          0% Google Drive
          0% AppleSpell
    Top Processes by Memory: ℹ️
      236 MB Safari
      150 MB com.apple.WebKit.WebContent
      90 MB Google Drive
      82 MB Dropbox
      69 MB mds_stores
    Virtual Memory Information: ℹ️
      486 MB Free RAM
      1.62 GB Active RAM
      1.15 GB Inactive RAM
      1.04 GB Wired RAM
      1.85 GB Page-ins
      41 KB Page-outs
    Diagnostics Information: ℹ️
      Jan 11, 2015, 05:30:50 PM /Users/[redacted]/Library/Logs/DiagnosticReports/AirDisplayStatusItem_2015-01-1 1-173050_[redacted].crash
      Jan 11, 2015, 05:25:11 PM Self test - passed

    Thanks!
    Here is the results from running EtreCheck while in safe mode. (I hope I understood your directions correctly to do just that).
    EtreCheck version: 2.1.6 (109)
    Report generated January 20, 2015 at 8:41:33 PM MST
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Support] links for help with non-Apple products.
    Click the [Details] links for more information about that line.
    Click the [Adware] links for help removing adware.
    Hardware Information: ℹ️
             MacBook Air (13-inch, Mid 2011) (Technical Specifications)
             MacBook Air - model: MacBookAir4,2
             1 1.7 GHz Intel Core i5 CPU: 2-core
             4 GB RAM Not upgradeable
                       BANK 0/DIMM0
                                2 GB DDR3 1333 MHz ok
                       BANK 1/DIMM0
                                2 GB DDR3 1333 MHz ok
             Bluetooth: Old - Handoff/Airdrop2 not supported
             Wireless:  en0: 802.11 a/b/g/n
             Battery Health: Normal - Cycle count 377
    Video Information: ℹ️
             Intel HD Graphics 3000 - VRAM: 384 MB
                       Color LCD 1440 x 900
    System Software: ℹ️
             OS X 10.10.1 (14B25) - Time since boot: 0:4:59
    Disk Information: ℹ️
             APPLE SSD SM128C disk0 : (121.33 GB)
                       EFI (disk0s1) <not mounted> : 210 MB
                       Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
                       Macintosh HD (disk1) / : 120.10 GB (59.56 GB free)
                                Core Storage: disk0s2 120.47 GB Online
    USB Information: ℹ️
             Apple Inc. FaceTime Camera (Built-in)
             Apple Inc. Apple Internal Keyboard / Trackpad
             Apple Inc. BRCM20702 Hub
                       Apple Inc. Bluetooth USB Host Controller
             Apple Internal Memory Card Reader
    Thunderbolt Information: ℹ️
             Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
             Mac App Store and identified developers
    Kernel Extensions: ℹ️
                                         /System/Library/Extensions
             [not loaded]        com.Cycling74.driver.Soundflower (1.6.6 - SDK 10.6) [Support]
             [not loaded]        com.avatron.AVExFramebuffer (1.7 - SDK 10.8) [Support]
             [not loaded]        com.avatron.AVExVideo (1.7 - SDK 10.8) [Support]
    Problem System Launch Daemons: ℹ️
             [failed]                 com.apple.ucupdate.plist [Details]
             [failed]                 com.apple.watchdogd.plist [Details]
    Launch Agents: ℹ️
             [not loaded]        com.google.keystone.agent.plist [Support]
             [not loaded]        com.splashtop.streamer-for-root.plist [Support]
             [not loaded]        com.splashtop.streamer-for-user.plist [Support]
             [not loaded]        com.teamviewer.teamviewer.plist [Support]
             [not loaded]        com.teamviewer.teamviewer_desktop.plist [Support]
    Launch Daemons: ℹ️
             [not loaded]        com.adobe.fpsaud.plist [Support]
             [not loaded]        com.google.keystone.daemon.plist [Support]
             [not loaded]        com.leapfrog.connect.authdaemon.plist [Support]
             [not loaded]        com.microsoft.office.licensing.helper.plist [Support]
             [not loaded]        com.splashtop.streamer-daemon.plist [Support]
             [not loaded]        com.splashtop.streamer-srioframebuffer.plist [Support]
             [not loaded]        com.teamviewer.teamviewer_service.plist [Support]
    User Launch Agents: ℹ️
             [not loaded]        com.adobe.ARM.[...].plist [Support]
             [not loaded]        com.leapfrog.connect.monitor.plist [Support]
             [not loaded]        com.splashtop.streamer-for-user.plist [Support]
    User Login Items: ℹ️
             iTunesHelper     Application Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
             AirDisplayStatusItem                   Application  (/Library/PreferencePanes/Air Display Preferences.prefPane/Contents/Resources/AirDisplayStatusItem.app)
             Dropbox            Application  (/Applications/Dropbox.app)
             ScreenCapture Application  (/Library/PreferencePanes/Air Display Preferences.prefPane/Contents/Resources/ScreenCapture.app)
             Google Drive    Application  (/Applications/Google Drive.app)
             Google Chrome                           Application Hidden (/Applications/Google Chrome.app)
             WDQuickView  Application  (/Incompatible Software/WDQuickView.app)
    Internet Plug-ins: ℹ️
             NPDjVu: Version: 6.1.1 [Support]
             o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
             Google Earth Web Plug-in: Version: 5.2 [Support]
             Default Browser: Version: 600 - SDK 10.10
             Flip4Mac WMV Plugin: Version: 2.3.5.4 [Support]
             PrintDialogExt: Version: 6.1.1 [Support]
             AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Support]
             FlashPlayer-10.6: Version: 16.0.0.257 - SDK 10.6 [Support]
             Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Support]
             Flash Player: Version: 16.0.0.257 - SDK 10.6 Cannot contact Adobe
             QuickTime Plugin: Version: 7.7.3
             googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
             SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Support]
             AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Support]
             DirectorShockwave: Version: 11.0.3r470 [Support]
    User internet Plug-ins: ℹ️
             CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Support]
    3rd Party Preference Panes: ℹ️
             Air Display Preferences [Support]
             Flash Player  [Support]
             Flip4Mac WMV  [Support]
    Time Machine: ℹ️
             Time Machine not configured!
    Top Processes by CPU: ℹ️
                  4%        WindowServer
                  0%        AppleSpell
                  0%        notifyd
                  0%        fontd
                  0%        opendirectoryd
    Top Processes by Memory: ℹ️
             241 MB             Safari
             168 MB              Finder
             129 MB              com.apple.WebKit.WebContent
             103 MB             WindowServer
             77 MB                CalendarAgent
    Virtual Memory Information: ℹ️
             139 MB              Free RAM
             1.85 GB             Active RAM
             1.75 GB             Inactive RAM
             537 MB             Wired RAM
             810 MB             Page-ins
             164 KB               Page-outs
    Diagnostics Information: ℹ️
             Jan 20, 2015, 08:37:12 PM        Self test - passed

  • After upgrading to OS X Lion Aperture 3.1.3 runs very slowly and crashes

    After upgrading to OS X Lion Aperture 3.1.3 runs very slowly and crashes regularly when editing and/or exporting images.  Prior to the upgrade these problems did not exist - has anyone else encountered this behavior and found a resolution?
    My iMac has 2GB of RAM (max RAM is 3GB according to the machine specs) and uses a 2TB external drive for the Aperture library and Time machine backups.

    Thanks for the suggestions.  Unfortunately after doing the Repair Permissions and rebuilding the Aperture Library the performance has not improved.
    I cleared out the cache(s) by removing all of the files in the following folders and restarting:
    Hard Drive/Library/Caches
    Hard Drive/System/Library/Caches
    Hard Drive/Users/(Your user)/Library/Caches
    which seems to have helped a little bit.  I did notice that in my Users folder there are 111 items:
    username
    username 1 (then folders with the same name up to 109)
    Shared
    could the extra username folders be causing the performance issue?  In each folder is a Library folder, in the Library folder is a Preferences folder and in the Preferences folder is a com.apple.internetconfigpriv.plist file and sometimes a com.apple.LaunchServices.plist file.
    Only the username 1's Library folder has the standard Caches, Fonts, Logs & Preferences folders.
    Is it safe to remove the username 2 - 109 folders?  If so is the creation of these folders something I can turn off?

  • How do I clean my mid 2007 iMac? The disk space is running VERY low and I would love an idea. I make videos and upload them to youtube and I need space to do that. Thanks for your time!

    How do I clean my mid 2007 iMac?
         The disk space is running VERY low and I would love an idea. I make videos and upload them to youtube and I need space to do that. Thanks for your time!                              
                                       If you have an idea please respond!

    You should never, EVER let a conputer hard drive get completely full, EVER!
    With Macs and OS X, you shouldn't let the hard drive get below 15 GBs or less of free data space.
    If it does, it's time for some hard drive housecleaning.
    Follow some of my tips for cleaning out, deleting and archiving data from your Mac's internal hard drive.
    Have you emptied your iMac's Trash icon in the Dock?
    If you use iPhoto, iPhoto has its own trash that needs to be emptied, also.
    If you store images in other locations other than iPhoto, then you will have to weed through these to determine what to archive and what to delete.
    If you use Apple Mail app, Apple Mail also has its own trash area that needs to be emptied, too!
    Look though other Apple Mail folders like the junk mail and delete the mail that is in there. Look through your sent items folders and see there is any mail in there that can be deieted.
    Delete any old or no longer needed emails and/or archive to disc, flash drives or external hard drive, older emails you want to save.
    Other things you can do to gain space.
    Once you have around 15 GBs regained, do a search, download and install OmniDisk Sweeper.
    This app will help you locate files that you can move/archive and/or delete from your system.
    STAY AWAY FROM DELETING ANY FILES FROM OS X SYSTEM FOLDER!
    Look through your Documents folder and delete any type of old useless type files like "Read Me" type files.
    Again, archive to disc, flash drives, ext. hard drives or delete any old documents you no longer use or immediately need.
    Look in your Applications folder, if you have applications you haven't used in a long time, if the app doesn't have a dedicated uninstaller, then you can simply drag it into the OS X Trash icon. IF the application has an uninstaller app, then use it to completely delete the app from your Mac.
    Download an app called OnyX for your version of OS X.
    When you install and launch it, let it do its initial automatic tests, then go to the cleaning and maintenance tabs and run the maintenance tabs that let OnyX clean out all web browser cache files, web browser histories, system cache files, delete old error log files.
    Typically, iTunes and iPhoto libraries are the biggest users of HD space.
    move these files/data off of your internal drive to the external hard drive and deleted off of the internal hard drive.
    If you have any other large folders of personal data or projects, these should be archived or moved, also, to the optical discs, flash drives or external hard drive and then either archived to disc and/or deleted off your internal hard drive.
    Good Luck!

  • Only Hotmail running very slowly and errors in loading correct page

    recently Hotmail havs taken a long time to load pages. Plus when a email is selected page flickers and wrong page displayed.
    this is not happening with Yahoo mail. Sometimes error message such as "not responding" or "cannot complete". But only when trying to get hotmail

    Hi Larry,
    Thankyou for your reply, this is a partial answer
    This server has been running for about 3 years now,
    The faults started after I did an service pack update for sharepoint. I then did the manual update but the C drive then started to run very slowly and was giving disk size too low errors so I moved the SUS to a different drive but this hasnt helped. It is
    still running painfully slow. Ran SBS BPA and found no faults. However ran Exchange BPA and did find faults which I have now fixed. Still have large number of errors
    Brian

  • The report l runs very night and gets ended with error

    Dear all,
    I am facing a problem in solution manger. There is an report (Program/Command  RDSMOPSOL_MONIREFRESH ) will runs very night and get ended with error and there is Run-time error "MESSAGE_TYPE_X".
    Please suggest how to solve the problem.
    Is this report is necessary   for the system because it is not mention in the sap stand jobs.
    SM37 log
    Job started
    Step 001 started (program RDSMOPSOL_MONIREFRESH, variant &0000000000875, user ID BASIS)
    Opening and closing session started. Session SM2000000000065
    Opening and closing the session was successful. Session: SM2000000000065
    Opening and closing session started. Session SM2000000000005
    ABAP/4 processor: MESSAGE_TYPE_X
    Job cancelled
    SM:CSA SESSION REFRESH
    No. Program/Command       Prog. type Spool list Parameter      User  Lang.
    1  RDSMOPSOL_MONIREFRESH ABAP                  &0000000000876 BASIS EN
    Sm21 log
    00:00:50 DIA 00 000 SAPSYS            EEA OPERATION MODES: Switch to operation mode Normal triggered
    00:30:57 BTC 08 200 BASIS             R68 Perform rollback
    00:30:57 BTC 08 200 BASIS             AB0 Run-time error "MESSAGE_TYPE_X" occurred
    00:30:57 BTC 08 200 BASIS             AB1 > Short dump "081112 003057 sapsm BASIS " generated
    00:30:57 BTC 08 200 BASIS             D01 Transaction Canceled 00 671 ( MESSAGE_TYPE_X 20081112003057sapsm BASIS 2001 )
    00:30:57 BTC 08 200 BASIS             R68 Perform rollback
    00:30:57 BTC 08 200 BASIS             AB0 Run-time error "MESSAGE_TYPE_X" occurred
    Details
    Recording at local and central time........................ 12.11.2008 00:30:57
    Task................ 05312 . 08 B8 BTC background processor No. 08
    User................ BASIS
    Client.............. 200
    Terminal............
    Session............. 1
    Transaction code....
    Program name........
    Problem class....... T    Transaction Problem
    Development class... SABP
    Further details for this message type
    Module name......... abdynpro
    Line................ 1133
    Error text.......... ab_jmess
    Documentation for system log message AB 0 :
    The specified runtime error has occurred in the system.
    Parameter
      a.. MESSAGE_TYPE_X
    Technical details
    File................ 000048
    Position............ 0000253620
    Entry type.......... l      ( Error (Module, Row)            )
    Message ID.......... AB 0
    Variable parts...... ab_jmess                                            abdynpro1133
    Time     Ty. Nr Cl. User         Tcod MNo Text                                                                    Date : 12.11.08
    00:30:57 BTC 08 200 BASIS             AB1 > Short dump "081112 003057 sapsm BASIS " generated
    etails
    ecording at local and central time........................ 12.11.2008 00:30:57
    ask................ 05312 . 08 B8 BTC background processor No. 08
    ser................ BASIS
    lient.............. 200
    erminal............
    ession............. 1
    ransaction code....
    rogram name........
    roblem class....... K    SAP Web AS Problem
    evelopment class... SABP
    BAP Mini dump
    ate................ 20081112
    ime................ 003057
    ost................ sapsm
    ser................ BASIS
    ocumentation for system log message AB 1 :
    A short dump was generated for the specified program termination.
    You can analyze this short dump in the system log evaluation by
    selecting this line or evaluating Table SNAP (Transaction ST22).
    echnical details
    ile................ 000048
    osition............ 0000253800
    ntry type.......... s      ( ABAP Runtime Error             )
    essage ID.......... AB 1
    ariable parts...... 081112003057sapsm   BASIS
    Time     Ty. Nr Cl. User         Tcod MNo Text                                                                    Date : 12.11.08
    00:30:57 BTC 08 200 BASIS             D01 Transaction Canceled 00 671 ( MESSAGE_TYPE_X 20081112003057sapsm BASIS 2001 )
    Details
    Recording at local and central time........................ 12.11.2008 00:30:57
    Task................ 05312 . 08 B8 BTC background processor No. 08
    User................ BASIS
    Client.............. 200
    Terminal............
    Session............. 1
    Transaction code....
    Program name........
    Problem class....... K    SAP Web AS Problem
    Development class... SDYN
    Module name.........
    Location............
    T100................ 00                  671
    Parameters..........
    Documentation for system log message D0 1 :
    The transaction has been terminated.  This may be caused by a
    termination message from the application (MESSAGE Axxx) or by an
    error detected by the SAP System due to which it makes no sense to
    proceed with the transaction.  The actual reason for the termination
    is indicated by the T100 message and the parameters.
    Additional documentation for message 00                  671
    ABAP/4 processor: &
    No documentation exists for message 00671
    Parameter
      a.. MESSAGE_TYPE_X
    00:30:57 BTC 08 200 BASIS             R68 Perform rollback
    Details
    Recording at local and central time........................ 12.11.2008 00:30:57
    Task................ 05312 . 08 B8 BTC background processor No. 08
    User................ BASIS
    Client.............. 200
    Terminal............
    Session............. 1
    Transaction code....
    Program name........
    Problem class....... W    Warning
    Development class... STSK
    Further details for this message type
    Module name......... thxxhead
    Line................ 1240
    Error text..........
    Caller.............. ThIRoll
    Reason/called....... roll ba
    Documentation for system log message R6 8 :
    An error has causes an SAP rollback.  All database updates are reset.
    Technical details
    File................ 000048
    Position............ 0000254520
    Entry type.......... m      ( Error (Function,Module,Row)    )
    Message ID.......... R6 8
    Variable parts......                                       ThIRollroll bathxxhead1240
    Regards,
    Shiva

    Hi karteek,
    I have check there is Switch of operation mode but when I have checked the t-code sm63 there is no new mode are in normal mode.
    There is  one thing I want to ask dose this report (Program/Command RDSMOPSOL_MONIREFRESH )  run   in your system or any one server because I have think there is some problem in job shued
    and is also not mention in the sap stand jobs.
    there is an error in sm21 in job.
    BASIS        SM36 EFK BP_CHECK_REPORT_VALUES: Invalid program values found. Reason:
    BASIS        SM36 EFC > Program RDSMOPSOL_MONIREFRESH has no variants, but a variant was specified
    Is this SM37 log
    Job started
    Step 001 started (program RDSMOPSOL_MONIREFRESH, variant &0000000000875, user ID BASIS)
    Opening and closing session started. Session SM2000000000065
    Opening and closing the session was successful. Session: SM2000000000065
    Opening and closing session started. Session SM2000000000005
    ABAP/4 processor: MESSAGE_TYPE_X
    Job cancelled
    Sm21 log
    SAPSYS            EEA OPERATION MODES: Switch to operation mode Normal triggered
    BASIS             R68 Perform rollback
    BASIS             AB0 Run-time error "MESSAGE_TYPE_X" occurred
    BASIS             AB1 > Short dump "081111 003056 sapsm BASIS " generated
    BASIS             D01 Transaction Canceled 00 671 ( MESSAGE_TYPE_X 20081111003056sapsm BASIS 2001 )
    BASIS             R68 Perform rollback
    BASIS             R49 Communication error, CPIC return code 017, SAP return code 223
    BASIS             R64 > CPI-C function: CMINIT(SAP)
    *BASIS        SM36 EFK BP_CHECK_REPORT_VALUES: Invalid program values found. Reason:*
    *BASIS        SM36 EFC > Program RDSMOPSOL_MONIREFRESH has no variants, but a variant was*
    specified
    BASIS             R68 Perform rollback
    BASIS             AB0 Run-time error "MESSAGE_TYPE_X" occurred
    BASIS             AB1 > Short dump "081111 220948 sapsm BASIS " generated
    BASIS             D01 Transaction Canceled 00 671 ( MESSAGE_TYPE_X 20081111220948sapsm BASIS 2001 )
    Details Page 2 Line 6 System Log: Local Analysis of sapsm                     1
    Time     Ty. Nr Cl. User         Tcod MNo Text
    00:00:51 DIA 00 000 SAPSYS            EEA OPERATION MODES: Switch to operation mode Normal triggered
    Details
    Recording at local and central time........................ 13.11.2008 00:00:51
    Task................ 04100 . 00 D0 Dialog work process No. 00
    User................ SAPSYS
    Client.............. 000
    Terminal............
    Session............. 1
    Transaction code....
    Program name........
    Problem class....... S    Operation Trace
    Development class... SBTC
    Sm63
      Start/end time   Name of the active operation mode
       00.00 - 01.00    Normal
       01.00 - 02.00    Normal
       02.00 - 03.00    Normal
       03.00 - 04.00    Normal
       04.00 - 05.00    Normal
       05.00 - 06.00    Normal
       06.00 - 07.00    Normal
       07.00 - 08.00    Normal
       08.00 - 09.00    Normal
       09.00 - 10.00    Normal
       10.00 - 11.00    Normal
       11.00 - 12.00    Normal
       12.00 - 13.00    Normal
       13.00 - 14.00    Normal
       14.00 - 15.00    Normal
       15.00 - 16.00    Normal
       16.00 - 17.00    Normal
       17.00 - 18.00    Normal
       18.00 - 19.00    Normal
       19.00 - 20.00    Normal
       20.00 - 21.00    Normal
       21.00 - 22.00    Normal
       22.00 - 23.00    Normal
       23.00 - 00.00    Normal
    Regards,

  • On my macbook pro I have a message on my homepage telling me that certain items want to use my keychain. I've pressed cancel the message will not go. The mac is now running very slow and iphoto and safari are not working. Can anyone help?

    On my macbook pro I have a message on my homepage telling me that certain items want to use my keychain. I've pressed cancel the message will not go. The mac is now running very slow and iphoto and safari are not working. Can anyone help?

    What version of Mac OS X?
    What home page?
    What browser?

  • I have an iMac 5.1 which is running OSx10.5.8 - it runs very slowly and I can't find if there is a particular problem. In the process, I have tried to install 10.6 [I have a new iMac] and the 5.1 won't accept the install discs.

    I have an iMac 5.1 which is running OSx10.5.8 - it runs very slowly and I can't find if there is a particular problem. In the process, I have tried to install 10.6 [I have a new iMac] and the 5.1 won't accept the install discs.

    As you have discovered... you cannot use the install discs from another Mac...
    Re the iMac running OS X 10 5 8... and for your New Mac...
    See Here for keeping your Mac Happy...
    http://support.apple.com/kb/HT1147
    http://www.thexlab.com/faqs/maintainingmacosx.html
    http://www.thexlab.com/faqs/performance.html

  • I am having a problem with my cs6 running very slow and when i save i am getting an error message that says, "This document is bigger than 2 gb (the file may not be read correctly by some TIFF viewers.) please help

    I am having a problem with my cs6 running very slow and when i save i am getting an error message that says, "This document is bigger than 2 gb (the file may not be read correctly by some TIFF viewers.) please help

    wen6275,
    It looks like you're actually using a camera or phone to take a photo of your monitor.
    That's not what is commonly known as a "screen shot". 
    It looks like you're on a Mac.  Hitting Command+Shift+3 places a capture of the contents of your entire monitor on your Desktop; hitting Command+Shift+4 will give you a cross-hairs cursor for you to select just the portion you want to capture.
    I'm mentioning this because I fear I'm not construing your original post correctly when you type "I am working with a large files [sic], currently it has 149 layers, all of which are high resolution photographs", so I'm wondering if there's some similar use of your own idiosyncratic nomenclature in your description of your troublesome file.
    Perhaps I'm just having a major senior moment myself, but I'm utterly unable to imagine such a file.  Would you mind elaborating?

  • Query runs very slow and sometime freezes

    Hi Experts,
    I have just installed SAP GUI 710 but when i open a query in analyzer it runs very slow and  if the variables are set for more than 6 months it just sits there and finally times out. It takes at least 5 minutes to open the query if it opens at all. Can you please advise me on how to resolve this issue??
    Thanks, point will be awarded.

    Worth running RSRT .
    Ravi Thothadri

  • Mac book pro is running very slow and won't connect to the Internet

    Mac book pro is running very slow and won't connect to the Internet. Please help I'm rubbish with computers!

    Mac book pro is running very slow and won't connect to the Internet. Please help I'm rubbish with computers!

  • HT1338 My Mac book Pro is running very slow and the rainbow ball is appearing all the time. Any suggestions for clean up??

    My Mac book Pro is running very slow and the rainbow ball is appearing all the time. Any suggestions for clean up?? I have the OS X Lion system.

    As well as what a brody asked :
    - do you need more RAM? (run Activity Monitor and see how much free RAM - green - is available)
    - do you Restart fairly regularly, e.g. at least once a week, to clear out any swap or temporary files?
    - do  you need to do maintenance, e.g. clearing out caches and unused logs, etc?

  • I have problem with Adobe Premier because it runs very slow and not smooth at all!, here are my components on computer...

    Here are my components on computer...
    Even with small project, my processor is start running very high and everything in program runs very slowly, which component is the worst, what shuld i change?
    I hvae Adobe premier CS6...
    Thank you guys!

    Here are my components on computer...
    Even with small project, my processor is start running very high and everything in program runs very slowly, which component is the worst, what shuld i change?
    I hvae Adobe premier CS6...
    Thank you guys!

Maybe you are looking for