Hard Drive LED?

Does anyone else's hard drive LED not light up? I am wondering if the K8N Neo Platinum mobo has the problem or if its the connector coming from my new Kingwin aluminum case. I like to see the little light flicker so I know my platters are spinning.
Suggestions?
Also... I didn't attach my firewire connector. Is firewire implementation on this board all that? I read the performance of this standard on the K8N Neo Platinum wasn;y any better than the USB 2.0 throughput.
==
MY CURRENT SYSTEM CONFIGURATION:
Micro-Star International (MSI) K8N Neo Platinum MS-7030 Motherboard (1.1 BIOS)
AMD Athlon 64 3000+ Central Processing Unit (Newcastle AX Revision)
(Retail Version) Aluminum Heat Sink and Fan
Two Corsair VS512MB400 512MB DDR400 PC3200 CAS2.5 Value Select Memory Chips
Sapphire (ATI) Radeon 9800 Pro Atlantis AGP Video Card (128M, 8X)
Two Western Digital 160GB IDE HDDs (8MB Cache)
Western Digital 40GB IDE HDD (8MB Cache)
Plextor 708A DVD-ROM Drive
Liteon LTR-42327S CD-ROM Drive
3.5-Inch Floppy Disk Drive
Enermax EG465P-VE 460W Power Supply (+3.3V@35A; +5V@35A; -5V@1A; +12V@33A; -12V@1A; [email protected])
Kingwin KT-424-S SL RT Aluminum Case
Vantec CCB-A1C IceBerq All-in-One Motherboard Chipset Copper Cooling Kit
Windows XP Professional Operating System (Service Pack 1a)

Quote
Originally posted by NewNeo
I have a K8N Neo in a Lian Li PC65B, and I had to play around with the power leads to to get all the lights / speaker to finally work they way the should.
My final configuration was all leads with labels towards top of case except for POWER LED; POWER LED has label facing down toward bottom of case. Not getting them all right would impact others; for instance, not orienting the POWER LED down would make the HDD light stay constantly lit or not at all (can't remember exactly ... I had to try so many combos). The point being that a totally unrelated lead may impact the LED that your having a problem with so you may have to play around awhile to get them right.
Cool biulding rig in my sig with this case in the morning this will save me some time thanks.

Similar Messages

My HP Mini 110-1050NR will not start. Power LED, WiFi LED and Hard drive LED Flash

My Mini 110-1050NR just died... When I try to turn it on the Power Switch LED, the WiFi Switch LED and the Hard Drive LED just flash on and off. There's no specific count. They continue to flash until I disconnect the battery.

Hi there
I sent you 1 link
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00372748&tmp_task=solveCategory&cc=us&dlc=en&la...
Check this out and let me know
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

KT6V Hard drive led always on

My hard drive led is always on. I know I have it connected correctly as per the manual. I have 2 IDE hard drives on ide bus 1 and a cdrw and a zip drive on ide bus 2. Any help would be great.

I had that problem some days ago. It was very queer, since at booting, system didn't detect the slave HD. If I entered bios in that moment and went to detect the HD that appeard as not installed, Bios detected it without problem and then begun all booting process again and then the slave disk was detected OK. Now, if I couldn't enter Bios, at first Windows detected the HDD that wasn't detected by Bios, but some days later I found that Wind.XP didn't detect it either. Then was that the HDD led stayed on, and the slave HDD running. The solution: I changed the master/slave config. to cable detect and all went OK since then.

Why doesent the Hard Drive LED work with my SATA Hitachi?

just buil a new system with the neo platinum my case is the slk3700amb
I just plugged in my sata hitachi into serial port 1 the drive works fine but I just want my HD LED to work, anyone know what I should do?
thanks

Try flipping the case led connector over for the HDD.

Airport time capsule (spring 2014-2TB) hard drive is spinning but the LED is off and it will not connect to my MBA (mid 2013)

My airport time capsule 2TB accidentally got unplugged from the awl while in use. now you can hear and feel internal hard drive of my 2 TB spinning but all LED's won't turn on. it will not connect to my 2013 MBA or be recognized my my iPhone 5 etc. when i plug it in airport utility senses something but will not connect. please help! my entire life is on this thing.
trouble shooting thus far:
unplugged APTC 2TB & MBA
reset MBA
currently unplugged the Airport time capsule hoping to cool it off? ...

In this case the TC should be in bridge mode.
Win8 is still problematic. Try using ethernet instead of wireless. I think the drivers are poor still and it is well worth having a try via ethernet if you haven't already.
Otherwise you will need to wait for apple to release bonjour for windows 8 and airport utility.. which is not out yet.
Also make sure the windows is set to home, not work or public.. even turn off the firewall.
Open windows explorer and type the TC ip address into the address bar.. (none of which is perhaps the same.. I gave away windows at vista.. shudder)
\\TCIPadderss.

I have a powermac dual g5 2.0 that wont start up.When I plug it in I get the click from the power supply. When I hit the start button, the white led on the front panel lights up and stays lit. No whir sound from the hard drive or the fan. No lights on the

I have a powermac dual g5 2.0 that wont start up.When I plug it in I get the click from the power supply. When I hit the start button, the white led on the front panel lights up and stays lit. No whir sound from the hard drive or the fan. No lights on the motherboard

The click usually indicates a big problem, but...
How to reset the SMU/PMU on a Power Mac G5 (Late 2004) or Power Mac G5 (Late 2005) ...
http://support.apple.com/kb/HT1436
Earlier G3, G4, G5 models...
http://support.apple.com/kb/HT1939
Might be time to replace the PRAM Battery, 4 years is close to their lifespan, far less if ever without AC power, & can cause strange startup problems...
See which one your G5 has...
http://eshop.macsales.com/item/Newer%20Technology/CR2032/
http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/

MBP won't boot, black screen, no white LED, clicking hard drive noise

Hey everybody, so the title basically summarizes it all. I connected an IDE HDD to my Macbook Pro through a USB enclosure, which had an AC IN jack, for plugging it into an electrical outlet (which I did) and the moment I connected it to my computer's usb port, the screen suddenly went black. I disconnected the HDD, and tried to turn on my MBP but it was no use. Ever since I have tried again and again to turn it on, but the computer will not boot. I have performed all of the suggested steps by Apple (PRAM reboot, holding down different keys while pressing the "on" button, etc.) but it's been worthless. My hard drive is okay, since i took it out and found out that all of my information and files were there. Still, whenever I try to turn the computer on, a clicking sound can be heard, as if the HD was trying to spin but failed. I have no display whatsoever, and no white LED in the front. I am truly desperate and would appreciate anyone's help big time.
Thanks a lot,
Luis

Thanks for the reply but it isn't a hard drive issue. I have tested the hard drive in an external enclosure and it's working fine. I even put in another hard drive i have and it wont boot that either. I'm thinking its a logic board issue. Any one know best place to get logic board replacement near london for cheap

VM leak led to corrupted hard drive.

I am running 10.7.4 with a 250 GB solid state drive. Space is a big issue for me since I do bioinformatics w large files using genome data. One program I need to use for work exonerate, has a big memory leak issue in OSX. It's not the only program that does, I've had a good look at the forums and have complained about this issue before. The difference is that I can't stop using this program because it's for work. It ***** up all the available HD space with the vm swap files, as much as 60-80GB at a time. The last time I had to reboot before the analysis was complete- which was unfortunate becase it had been running all day and now I have to restart it but not soon because it seems the last memory issue and scramble to delete stuff and make more room has resulted in a corrupted hard drive. Not sure how this happenened but also not surprised.
Volume bitmap needs minor repair for orphaned blocks
Invalid volume free block count
(It should be 27615695 instead of 16346753)
The volume Macintosh HD was found corrupt and needs to be repaired.

And the question is?

Hard Drive Is Flickering:

I have been podcasting...downloading lots of the free ones... and some of them are a few megabytes but some are 1/2 of a gigabite. This takes up space, and also OS X And OS 9 on the same 10gb hard drive. There is 1.5 gb left.
My 80gb samsung hard drive connected to USB, keeps getting "Device Removal" again, and I opened Disk Utility and it said something like "It is a 1 and it should be 0." and it did not repair it. }=[ It still mounted it, and it has all the files and nothing appears to be damaged or missing, but it kept not-ejecting the hard drive. It began when I transfered a large podcast file onto the external hard drive and Finder hung on the transfer. Finder itself did not freeze up, it was simply not finishing the transfer file. I forced quit Finder and it would not come back up. I went into Terminal and typed
/System/Library/CoreServices/Finder.app/Contents/MacOS/./Finder
and it came up. and it froze and then I typed killall finder and closed out of Terminal and re-opened it. Finder launched by itself this time with no problems... but I ran disk utility and my disk is messed up. That's it. I am going to connect the large hard drives to OS 9 only, and to transfer files off of OS X, I will use SD Cards with a USB adapter.
And in a few weeks I will buy fire wire enclosures. I hope very much that the fire wire won't have the same issues that USB has. It is plugged into USB hub now. The hub is self powered...and plugged into its own power strip. I know I shouldn't use USB hubs, but it can be difficult to have the hard drives plugged in, sync-ing an ipod, etc. all at the same time, and it annoying to have to unmount and disconnect routinely. Also...all my mp3s are stored on the external drive...so that is one reason why I had the ipod connected to the imac, and a hub connected to the imac with everything else (keyboard, mouse, and one of the USB enclosures) so I could easily have mp3s on my ipod.
But the only thing I did when it hung was transferring one (very large) podcast from internal hard drive to external hard drive.
Anyways, I have more "Computer Trauma" and do not ever want to connect external hard drives while running OS X. even with fire wire.
Also I am not going to bother moving files off of damaged directory hard drives with USB. I hope Fire Wire will be MUCH faster.
===========
And This Is Where I Am Now:
I connected USB enclosure with the 80gb Samsung directly to an imac with OS 9 booted and I turned on the enclusurer. The volume mounted instantly. Files could be accessed instantly. I also transferred some files on it to see if it would let me or if it would display an error message. It let me put files on it.
But........
Why was it flickering for like 10 minutes???????????????
The light was flickering from green to red a lot.
Is this "Mount Check" ?????????????
I thought Mount Check turned the arrow into a watch and the clock froze until the volume could be mounted. But the volume mounted, nothing froze, but the mouse arrow was slow and choppy for a while. It has stopped flickering. The light on the enclosure is green. What was OS 9 doing?????? Mount Check????? Defragmenting????? Repairing a directory?????? =S
Also.........sometimes when I had it connected it to OS X, OS X was doing something to my hard drive. =S I don't know what, but I wanted to eject the drive and it wouldn't let me!!!!!!! }=S I did not have any applications open such as iTunes, which could have been Using the hard drive. =S
And..... since I have discarded my 120gb maxtor, and the 20gb Western Digital and a 20gb Maxtor got zapped by that Blue And White power mac g3. ... I am using a damaged 80gb seagate.
I connected it. Nothing was on it anymore. But I connected it to OS 9. I erased it, because it said "the disk could not be read". It formatted it as
40gb!!!!!!!!!
And. every time I mount it, It says "...disk could not be read...", and if I select, "Eject"...
It mounts!!!!!!!!! =S
I can store files on it. I am not going to attempt to connect it to OS X. But OS 9 mounts it, even when it is damaged.
I appreciate lots of advice.
What I have:
= 80gb samsung with a 1 that should be a 0.
= 80gb seagate with damage but os 9 formatted it as 40gb and if I select eject on the error message, it mounts it instead.
= 2 imacs. One with a os 9 startup volume, and one with a OS X startup volume. Both with OS 9 drivers. imac g3s.
= 2 USB enclosures. But I am going to get Fire Wire. and some large drives. (should I get SATA, or 2.5 inch... or do these cost more????????? )
= AC adapter USB hubs... 7 port, with LED, and connected to its own power strip. The enclosures also have their own power strips. No, the power strips are not plugged into each other.

I appreciate any advice that people have.
It is possible that one of my enclosures has faulty power...something could be loose. An error message occured once while transferring files with OS 9.
I am still going to use OS 9 to move files and organize files that are in external storage because in my experiences, OS 9 is less likely to cause directory damage in the event of some power failure.

Internal Hard Drives Disappeared, Finder Memory Problem

Hello Helpful Folks,
I recently installed an addional internal Hard Drive, and an additional 1GB SDRAM. This worked great for a day, but the next morning, after powering up, system was extremely sluggish, and after much deadline-induced impatient problem solving, has gone from bad to worse (system refuses to acknowledge existence of internal Hard Drives). I apologize in advance for the length of this post, but as
the devil is in the details, I figure too much info is better than not enough.
Following is a breakdown of my system: AS IT LAST WORKED; RECENT UPGRADES; and MY LAME ATTEMPTS AT PROBLEM SOLVING THAT HAVE MADE THINGS WORSE. Please don't interpret my all caps as shouting, just trying to organize this post for better clarity.
System is dedicated to Video Editing with FCP 3, running under OS 9.2.2. System is "off the Grid", i.e. no network, no internet, no printer, no gaming devices. System was purchased new in July 2001, by a friend. At one point I know this system had an Airport card, which was removed prior to my purchase in 2003. I can't remember what else it may have had installed in its history, but here's what it has now:
SYSTEM AS IT LAST WORKED:
**bold items are upgrades Original Owner or I installed with no apparent problems**
Power Mac G4 "Quicksilver" 2001
867 PowerPC G4, 256 L2, 2MB L3
-1 Stick "ValueRAM - KVR 133 x 64 C3/512" in PC 133 DIMM slot **
- "Virtual Memory" was turned off years ago due to conflict with FCP 3
-2 empty DIMM slots
-1 60 GB internal HD (Maxtor Ultra ATA/100), 1 partition, formatted HFS+, jumpered as "Master" on Internal ATA 2 ID=0 (which as I understand it is ATA/66 speed)
-1 Pioneer "Superdrive" DVD-R/W/CD-R/W on Internal ATA 0 ID=0
-NVIDIA GeForce2 MX with 32MB SDRAM in AGP Slot, feeding a 17" Apple Studio Display.
-PCI Display Card "formacGA7" - not attached to any external device, not sure what its intended purpose is.**
-3 Empty PCI Slots
-OEM Keyboard attached to Monitor's rear USB port.
-Microsoft 3 Button Wheel mouse with "IntelliEye" (wheel is 3rd Button) connected to Keyboard USB port (right side).**
-2 OEM FireWire (400) ports
-2 OEM USB (1) ports
Peripherals that have worked in various configurations with this system over the past 3 years:
-3 OWC Mercury Elite ("Oxford Chipset") Externally powered, External FireWire(400) 200GB Hard Drives, 1 partition each, formatted HFS+, daisy-chained to either of the FireWire ports.
-1 Canon GL1 MiniDV camera, attached either to the other FireWire port, or to the last drive in the chain, depending on my urgency/laziness factor. BTW, FCP 3 has worked flawlessly controlling this Cam for logging and Batch Capturing.
Applications on System Hard Drive that I have OEM CDs for:
-OS 9.2 - (I think I remember that OS X was removed from system due to conflicts shortly after original purchase)
-FCP 3
-DiskWarrior (version unknown, purchased from Alsoft in 2003)
-OWC Intech Hard Disk SpeedTools ver 3.5
Other CDs I have:
OEM CDs for Power Mac G4:
-Software Install, OS 9.2, CD vers 1
-Software Install, OS 10.0.4, CD vers 1
-Software Restore, OS 9.2 & 10.0.4 CDs vers 1, Discs 1-4 of 4.
-OEM Apple Hardware Test; Power Mac G4, SW vers 1.2.1
Applications on system Hard Drive that I don't have CDs for, that I rarely use, but I'd like to keep:
-After Effects 5.0
-QuickTime Player 6.0.2
-Toast Audio Extractor 1.1
-Toast Titanium 5.0.2
Applications on system Hard Drive I use if my wife is busy on our Windows XP machine:
-Photshop 6.0
-Microsoft Word & Excel
# of other Applications on System Hard Drive I either don't use or may be integral to the system: 260
# of Control Panels:
-Enabled: 34
-Disabled: 0
# of Extensions:
-Enabled: 174
-Disabled: 0
note: a number of the applications and extensions are for AOL, Quickbooks, Microsoft Money and the like, as well as other things I don't use (Airport, USB printers, Networking, etc.)
Smart things I did:
-Regularly made backup copies of my FCP projects to the external drives.
-Bought a copy of MacDrive so I can see what's on my External Drives on the XP machine.
-Printed out System Profile before I installed upgrades.
-Thoroughly searched this discussion board for and gathered as much info as I could before upgrading.
Dumb things I did:
-Made a copy, but not a clone, of my System Folder to one of the external drives when I first got it.
-Didn't keep any sort of separate log of what's on the External Drives.
-Never ran any sort of Disk Maintenance, even after one of the Externals crashed (DiskWarrior saved my butt on that).
-Ignored some of the advice on this discussion board.
Really dumb thing I did without even realizing it:
Captured all media for a rush job onto my internal system Hard Drive, as well as storing and using massive jpgs for the same job on that same drive...
Which led to painfully slow rendering times, and crashes caused by "Error: Out of Memory", which I interpreted as "Must buy more memory" and not "must make sure I'm not trying to edit media stored on system drive, especially with massive jpgs that I should reduce"
RECENT UPGRADES:
Here's what I did, and how I did it:
Turned off system, disconnected all External FireWire Devices, disconnected Monitor, opened case, touched various metal parts of case and power supply to discharge any Static, unplugged power cable.
-Installed 2 512MB sticks of "Lifetime" PC 133 SDRAM; total System RAM is now 1.5GB, all 3 DIMM slots now occupied.
-Installed 1 Maxtor "DiamondMax" Ultra ATA/133 100GB Hard Drive (8 MB buffer) as "Slave" (no jumper) in top of U-Carrier above System Hard Drive; attached to middle of original Apple ribbon cable, attached available power plug.
Taped spare jumper to inside of empty drive bay, noting origin and date. Did NOT push PMU button. Carefully closed case. Reconnected Monitor, did NOT reconnect any FireWire devices. Powered System on, but did NOT perform PRAM reset.
I don't remember the exact order of what happened next, but I think: System booted up normally, a window popped up saying a new drive had been found, would I like to intitialize it?, which I did as Mac OS extended, and then named. If I was instructed to restart, I did so, otherwise did not. Clicked on "about this Mac" and saw that it now showed 1.5GB RAM. I then went about moving Media/Render files off the System drive (and one of the Externals) onto the Internal Drive, with a combination of FCP's Media Manager, and dragging from the Finder. After files had copied, dragged Media/Render files from System Drive to Trash. Opened FCP project, had FCP re-link to new locations of missing files. Saved, closed, and re-opened project, set Capture/Scratch disc to new internal Drive. At some point I changed FCP's Memory Allocation from whatever it was to 512000KB Minimum, and 900000KB Prefered (and I hope I got all those zeroes right). Did NOT restart after changing Memory Allocation, unless a window popped up instructing me to do so, in which case I did. Re-opened my project, rendered a few thing at a noticeably increased speed, saved everything, emptied the Trash, shut everything down, and called it a night as it was 4:30 am.
A few hours later, I plugged the MiniDV and an External Drive into the FW ports and powered up the System. It was behaving extremely sluggishly. I would click on something, the pointer would turn into a wristwatch (sometimes with the minute-hand moving, sometimes not) and like an actual minute later, what I'd clicked on would open. All three drives were on the desktop, still had their files, and "About this Mac" still showed 1.5GB total Memory. So I powered down, disconnected the FW devices, waited a bit, and powered back up. Same sluggish response. I tried to open my FCP project file, and instead got a Window that said something to the effect of "The Application associated with this document could not be found". I think I tried to open FCP from the Applications folder on the System Drive and got the same message (I'd only had 3 hours sleep, no coffee, my client had died, and his family was coming for whatever I had in a few hours).
LAME ATTEMPTS AT PROBLEM SOLVING THAT HAVE MADE THINGS WORSE
Panic had set in, which never solves anything, so I don't remember what order I performed which tasks, between searching for clues in this forum, and convincing myself that that would be faster than trying to compose a question, waiting for a response, etc.
The first two things I did, and I can't remember which I did first (both from Keyboard Commands during Restart):
Rebuild Desktop
PRAM Reset
Neither of those solved the problem, so I continued.
I tried restarting without extensions.
I would get errors that said something like "Not Enough Memory to Open Finder".
I tried booting from Disc 1 of the Software Restore Disk, which only wanted to destroy my data.
I tried booting from the OS 10 disk, with the same result.
I was finally able to boot from the OS 9.2 Software Install Disk, and actually saw both internal drives on the desktop, and the 1.5GB RAM in About this Mac. I tried to allocate more memory to Finder, but was informed that "Cannot Perform Requested Operation. This operation requires versions above 8.0".
I think at this point I decided that I must have too many extensions, and started disabling ones I thought irrelevent to my cause (mostly anything that said "AOL", "Airport", "Ethernet", "Printer", "Modem", "Speakable", and a couple things called "Open TPT".
It gets worse. Then I decided to turn off some "unnecessary" things via the control panels, but somehow managed to disable the control panels themselves: AppleTalk, DialAssist, File Sharing, Modem, Mouse (as I saw that Microsoft Mouse was among the others), Remote Access, Speech, USB Printer Sharing, and possibly TCP/IP.
That certainly didn't help anything (though upon restarting from the OS 9.2 Disc I was able to see the extensions and control panels in their respective "Disabled" folders in the System Folder). But I still wasn't able to get more Memory to Finder.
So, I decided a few more PRAM resets might help, which succeeded in making both Internal Hard Drives disappear. I tried booting up from the DiskWarrior disc, but even the Mighty DiskWarrior couldn't find the drives. I performed the longer, in depth version of the Apple Hardware Tools tests, which reported that everything's fine (including the new RAM), but made no mention of the Hard Drives at all. The deadline having long passed, I shut the system down. I read through more posts and tech articles, etc.
I searched my External drives with MacDrive on my XP, and found the drive that has the copy of my System Folder (which shows all extensions and control panels as enabled); not sure if the Quicksilver will boot from that, I don't know what the Keyboard command for booting from a FireWire drive is (if there is one) and the drive itself only has 900MB of free space.
I can't find any reference to Internal ATA drives anywhere in the MacDrive documentation; if it was possible I'd put them into the XP, get the files off the Mac drives, reformat them and install OS9 from the Discs.
This is where I am now:
The Quick Silver is still powered down. I removed the Microsft mouse and replaced it with the OEM Apple mouse. I opened the case, and removed the PRAM/Backup battery (manufacture date: July 2001). Couldn't find my voltmeter, so took the bat to Radio Shack and bought a new one. Had the Radio Shack guy test the old one: it showed 3.69 volts still. Have not installed the new battery yet. The case is still open, waiting for any advice any of you might have to offer.
Thank you all so much for your patience in perusing and pursuing this.
Sincerely,
Patterson
Power Mac G4 Quicksilver 867 Mac OS 9.2.x 17" Studio Display, 512MB RAM

Thank you Rodney and John,
The jumpers are correct for both Maxtor Drives.
Rodney, you are correct in that the initial problem (slow rendering/"out of Memory" crashes) was caused by my not realizing I'd stupidly captured several GBs of media to my system drive, and not checking which drives those files were on (as I'd assumed I'd put them on one of my external media drives) once that problem presented itself.
Before I'd determined what I'd done, I bought the extra RAM. After I'd found the media files on the System Drive, and saw that my dedicated media drives were too full to easily move them, I decided to buy an additional Internal drive so that I could:
-Move the Media onto it relatively quickly and finish my urgent project.
-Juggle all my media into a more organized fashion for archiving (as most of my projects are on-going long-term affairs)
-Wipe it, Partition it, and clone my System Drive onto it, as a spare bootable drive in case my OEM System Drive failed.
Copying the Media files onto the New Drive and moving the System Drive's Media files into the Trash worked great: huge improvement in Rendering, etc.
Before shutting down for the night I Emptied the Trash, and was pleased with the amount of space I'd freed up on the System Drive.
My guess is that the System Drive was terribly fragmented, having been subjected to intense use over the past 5 years without any sort of Drive Maintainence, and deleting that massive amount from it in one shot caused my extreme system sluggishness upon Startup the next day.
My subsequent lame attempts to solve the sluggishnes ultimately resulted in my losing access to both drives.
Today, I replaced the Backup Battery, pushed the PMU, re-attached the AC, and Powered Up with the case open as per your suggestion.
It was trying for a few minutes (the gray screen went black at one point, and then returned to gray) before presenting me with the flashing question mark.
There was, however, a quiet but distinct "buzzing" sound that would alternate: 1 sec "buzz", one second silence, one second "buzz", one second silence, etc. coming from the drives, even after the "?" appeared.
I powered down, removed the Ribbon and Power Cables from the new "Slave" drive, and powered up again, with the exact same results.
I powered down, removed the Ribbon and Power cables from the original "Master" drive, reinstalled the Jumper on the New Drive as "Master", plugged the End of the Ribbon and the Power cables into the New "Master" drive and powered up. The screen went to the "?" within 20 seconds instead of 4+ minutes, and no more "buzzing".
I put the Apple Hardware Tools Disk in, ran the "long" test, and everything came out fine.
I have to abandon this for now, but thanks again for your previous advice, and any more you may have!
Cheers,
Patterson

Macbook Pro Freezing, Can't back up files either to external hard drive either..

Hi,
I'm not entirely sure what happened but my Macbook Pro, (Lion/Mac OS X 10.7.5) just started to freeze a lot. I can hardly browse the web or sometimes browse folders. In some ocassions its even difficult to check the Activity monitor or go to Disk Utitlity. I always see the rainbow beach ball of death and in the force quit window I see the red "Not responding."
Because of this issue, I plan on taking my Macbook Pro to Apple but the problem is I can't even back up my files. I just started a time machine and it goes well until in the middle of the transfer it says:
"The backup was not performed because an error occured while copying files to the back up disk.
The problem may be temporary. Try again later to back up. If the problem persists, use Disk Utility to repair your backup disk."
so I tried a different ext. hard drive and still, it says the same message. Upon being fed up of the situation, I attempted to do the old school copy paste from drive to drive but again, in the middle of the transfer it stops and gives me a a differnet message:
"The finder can't complete the operation because some data in ____ can't be read or written."
I checked the file and its a .MOV a video file from my DSLR. I skipped this file and then again, it said the exact same message on a different video file. I can't just avoid these video files. I'm actually a film maker and all this clips are in desparately in need to be backed up.
Does anyone know how to fix this issue? Atleast backing up the files..
Thanks for the help.
p.s.
Not sure if this is related -- since my Macbook Pro has been running slow I deleted a couple of apps such as Things, DaVinci Resolve and FrameForge Previz.. Which to led to having my spolight indexing. I thought it was only the index thats making it run slow but the index done now and I can't back up my files!

If you have more than one user account, these instructions must be carried out as an administrator.
Triple-click anywhere in the line below to select it:
syslog -k Sender kernel -k Message CSeq "I/O error" | tail | open -f -a TextEdit
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. Normally the window will be empty. If you get output like this:
kernel[0] <Debug>: disk0s2: I/O error
the boot drive is failing, or there's some other hardware fault in the storage subsystem.

How to get data from hard drive in dead iMac?

I have an old slot-loading iMac (350Mhz G3 blueberry) that just died, probably a dead power supply or something. Won't turn on at all. I don't care about restoring it, I just want to take the hard drive out and grab data from it. I've found instructions for removing the HD ... but any tips on the best/cheapest way to hook it up to get data from it? It's EIDE I believe from what I've read so far. Thanks for any help.

Hey Richard.....Thanks for the reply to my question about my wife's dead iMac.....
Her iMac had been acting up lately, mostly to do with her Outlook Express freezing up in OS9. I dunno if OS9 was freezing or if the application was failing. Regardless, I would have to quit OS9, restart Outlook which at the same time restarted OS9. All would be fine for a while, a day or two and then the scene would repeat itself. But I think that issue is separate from the iMac being "dead". Often we have power outages in the area, more than we should. I had the iMac plugged into a battery backup, some APS product I think it is. I believe it is only good for less than an hour as we have other devices drawing on it too. Most of our power outages are of short duration, just enough to be aggravating, sometimes having to reset clocks, etc...And a couple times, I would have to reset the time and date on the iMac so this told me that the PRAM battery was below minimum voltage. But the iMac would ALWAYS restart, even with the low battery. But the most recent outage, about one hour duration, did in the iMac, somehow or other. I do believe the battery backup basically fully discharged. So I removed the battery, could not find a new battery locally so I drove to the big city and paid the local Apple service dealer a visit. I got ripped big time price wise, embarrassed to say. So I get home, put the battery in the holder, depressed the CMU reset, the powerbutton illuminated as did a green LED by the memory modules for less than three seconds and then quit. I also heard the HD trying to spin up and a high voltage THUMP which I assume is the CRT trying to ignite. If I unplugged the iMac, removed the battery, plug in the power again and hit the power button, the iMac would repeat the same short on period and then quit. So it did not seem to make any difference if there was a battery in place. I read somewhere to pull the battery, pull the AC cord, hold down the power button to dump any current (?) and let the unit sit for 24hrs. After that length of time, I was supposed to replace the battery, depress the CMU reset, wait ten seconds and then feed it AC. Well, when I pressed the power button, I heard life for maybe five seconds, maybe a second longer, then a beep and then it shut down. I pulled the AC cord, pulled the battery, re-inserted the battery, depressed the CMU reset, waited a few seconds, plugged in the AC cord, depressed the power button and I am back at the under three seconds of "power-up" and then nothing, dead, no beep, nothing. I think maybe it is a waste of time trying to mess with this unit, looking for a newer iMac on eBay, the snowball series with the 17" LCD, might be time better spent. Hate throwing stuff away, that's why I am up to my ears in junk, maybe u know that scenario. The wife likes my 19" ACER LCD screen, hooked up to this old dual 800mhz, though she dislikes the noise and the tower. But we both agree the large LCD screen is much easier on our aging eyes than the old iMac CRT. Anyway, I appreciate your help, always GREAT to correspond with an Apple fan.....John Bauer

ESATA/USB Secure Hard Drive is not recongized

Hi all,
I got this cool external hard drive in my work and it have been workin great... until now.
I had it connected to my computer and then my wife turn that computer into hibernation (ohh no), and since that I can't get my computer (any computer) to recongize it. When I connect it I enter my pin and the LED turns green (static) but the computer do not recognize it, it does not even say "found new hardware" when connecting it to a computer (with or without entering pin)
Please help, can I recover my data?
Best regards
Per

Hi,
I had the same problem a few weeks appart with two 500GB eSATA/USB Secure Hard Drives. I had safely disconnected the drive but I only physically disconnected it hours later.
After that, the disk wasn't recognized on any computer I tried it with (Windows or Linux, eSata or USB). After disconnecting the data cable, the led stayed green forever (usually it turns red a few seconds later).
I was able to make it work again by performing a complete reset (but of course everything was erased and I had to re-partition the drive).
Fortunately these drives are used for backups so I didn't lose any data. But it is worrying to know that we can't rely on it so much... It would be great to come up with a upgrade that would make the disk more robust for that kind of problems. I didn't find anything for this product on Lenovo's support website...
Best regards,
Nathalie

My efforts to remove malware from a network external hard drive connected to my Intel based iMac is now causing programs to hang when I try to open them.

I own an iMac, recently updated with OSX 10.75. It is the core computer on a home network shared with an iPad, Apple TV, two network printers,my wife's laptop, two iPhone, a BlackBerry and a BlackBerry Playbook. I am experiencing three if not four problems that are overwhelming.
My original problem is associated with Windows emails files or documents stored on my external network hard drive. One or more has malware and is sending malware laced files across the Internet to points unknown. As someone pointed out in a forum my iMac may be hosting,sharing and propagating Windows malware. I originally used Trend Micro software on my IMac to monitor any viral activity. Two weeks ago I noticed a number of notices from servers around the world saying my message was not undelivered. Since I had sent messages to the people I simply deleted the emails. Next I noticed the emails on my BlackBerry and my BlackBerry playbook.I configured the Trend to do a complete scan and although it did a complete scan it did not perform a full network scan. It did identify a series of .x27 document files with the same name tbut each had a sequential number. I assumed hat these were the source files that had sent out the email documents selling Viagara and othernproducts. I manually deleted thousands of the source documents and the files. This caused some disruption to my computer but it did not produce a hardware or software problem. By following this effort in conjunction with security scans I do believe the malware was activated by Iranian students who were able to activate the malware through my BlackBerry and BlackBerry Playbook. I learned this from an encounter I had when trying tondelete these files on my computer and my BlackBerry.
When using my PlayBook after deleting the files from my computer I noticed more messages being returned from servers. I realized that email accounts connected to my BlackBerry and BB Playbookn were not protected from this problem. As I searched for remedies I learned about turning on the firewall in the previous version of Lion but that did not stop the BlackBerry problem. Each time I deleted a source file on my computer more documents were released. I eventually received McAfee from my ISP. It provided security on the entire network. My first full scan of my external drive identified two malware files. One of them was associated with the Cialis ad the other was from a firm in the Middle East called ADP. it could not remove the latter file.
Moreover each time I attempted to remove the source file from my hard drive a file labeled A239A076F would show up on my Blackberry. As I removed them thousands of these files would show up. Ultimately I eventually disconnected the external hard drive and removed the battery from the phone and not use the email accounts these messages had used to enter my iMac. I am contacting ATT about BlackBerry data security and switching to a different phone for business purposes. I will probably change to an iPhone or Android phone for business purposes. I am also looking at ways to resolve the malware on that drive. There are a number of business and personal files on thatbdrive that I hope to keep. I dread having to pay McAfee to configure the software to eradicate the malware.
Moving on...last week I updated my iMac to 10.75. It simultaneously updated every Apple based program as promised. It did not update the non-Apple programs. I am not an IT professional and assumed that it had done so. On Saturday I attempted to download a file associated with my router extender using my untethered Playbook and BlackBerry desktop software. The program hung. I attempted a reboot and it reopened with the hung program. It created an alias file on the desktop. My inclination led to put the alias file in the trash can and delete it. My computer did not respond well to that action. It has been rebooted with Cmd-s-esc tens of time to see if that would activate a file check. It did not. I was able to run a disk utility check. And in spite of the hung process it eventually said the drive was okay.
Long story in a nutshell. My iMac is responding as if it is looking for a subprogram to complete its a function. Or it is attempting to finish the BlackBerry operation it began on Saturday. I hope this makes sense to someone and the know how I can restore functionality to my iMac.
Thank you.

I think the McAfee suite will do the trick when I pay them a one-time fee of $69 or $179 for a year for unlimited support.
Your call of course but IMO a waste of money. Please read this first:
There are many forms of ‘Malware’ that can affect a computer system, of which ‘a virus’ is but one type, ‘trojans’ another. Using the strict definition of a computer virus, no viruses that can attack OS X have so far been detected 'in the wild', i.e. in anything other than laboratory conditions. The same is not true of other forms of malware, such as Trojans. Whilst it is a fairly safe bet that your Mac has NOT been infected by a virus, it may have another security-related problem, but more likely a technical problem unrelated to any malware threat.
You may find this User Tip on Viruses, Trojan Detection and Removal, as well as general Internet Security and Privacy, useful:
https://discussions.apple.com/docs/DOC-2435
The User Tip (which you are welcome to print out and retain for future reference) seeks to offer guidance on the main security threats and how to avoid them.
More useful information can also be found here:
http://www.reedcorner.net/mmg/

I think my hard drive might be getting ready to crash again.

I'm starting to see some awfully weird stuff right now... after hard reboots due to X lockups (Sauerbraten fucking up), I seem to be losing data from config files that weren't being written to or used at the time of the reboot - .viminfo, for example, and the XML config stuff for Galeon. I also lost everything in my .xinitrc file after a normal, clean reboot. No SMART errors but I am getting rather suspicious. And no rootkits or trojans, AFAICT.
(Had this drive for only 2 years though, it shouldn't be failing now. Then again, it might have crashed before.)
Here's what smartctl --all has to say:
smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar family
Device Model: WDC WD400BB-00JHA0
Serial Number: WD-WMAMC1539009
Firmware Version: 05.01C05
User Capacity: 40,020,664,320 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Wed Jul 12 14:26:23 2006 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (1260) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 23) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0003 168 166 021 Pre-fail Always - 2591
4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1443
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0
9 Power_On_Hours 0x0032 093 093 000 Old_age Always - 5145
10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0012 100 100 051 Old_age Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1443
194 Temperature_Celsius 0x0022 103 088 000 Old_age Always - 40
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

- Electrostatic discharges: drive was pulled from a lightning-fried machine, apparently undamaged (I figured that it would be either okay or dead, given the surge's magnitude), but I'm starting to wonder if something got a little scrambled. If so, though. it took a while to show uo.
ESD damage is cumulative. in silicon terms you can weaken the transistors (silicon junctions) over a period of time just with low voltage discharges. It isnt necessarily so that these will fail totally and immediately. this is like a weld being ok but the metal around it rotting away over time.
re the CPU etc. a year or so back miqorz had similar probs with random crashes, especially with any medium to high CPU process. turned out he changed something on the CPU, cooler , fan or whatever, and the silicon heat transfer paste wasnt applied uniformly. this led to hotspots obviously and a breakdown of process wrt temperature.
back to basics, if you run a HD test (manufacturers testdisk ) itl remove that from the equation. then u can focus on other probables.
recently had trouble accessing a Maxtor 200G. worked ok when i made an image of it, (i work in data recovery/forensics) , but when trying to wipe it as the owner requested, it failed with I/O problems.
Maxtor hard drive test showed drive was failing.
so ... it worked ok to get an image, but screwed up when trying to write to it. Warranty job.
if you want to scrap the drive should it prove faulty, i can point you to some oss utils and procedures should you need to recover data. these have worked on drives that the M/F test confirmed drive failure. if you need to take it out of forum, dont be afraid to priv msg. im happy to make time to help.
good luck
Kern

Hard Drive LED?

Similar Messages

Maybe you are looking for