Hard drive not accessible at boot time. Machine won´t boot into Windows.

Greetings,
I am trying to troubleshoot an HP Mini 110-1000 (actually a refurbished HP Mini 110-1033 CL PC). 
When the machine boots, it attempts to connect to the network and the process hangs. I booted into BIOS to attempt changing the boot sequence to another device such as the hard disk or USB. None where found. Then, I tried to perform diagnostics on the hard drive. It was not found. 
My guesses are:
1. The hard drive is disconnected
or
2. The hard drive is broken
or
3. All of the hardware devices are disconnected.
or
4. The mother board is broken.
I would appreciate some feedback before I start disassembling the machine. I would just go ahead, but the fact that
none ofthe input devices are seen at boot time makes me believe that this is a mother board problem.
In any case, a re-install of the OS is apparently in store, and I don´t have the original install disks...
Thank you for your help and feedback.
Regards,
Jean-Pierre

Hi,
Please use the following instructions to fix:
   http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c01443463&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_in​...
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • LaCie d2 500GB Quadra Hard Drive Not Being Seen By Time Machine

    Hello all,
    I have a LaCie d2 500GB Quadra Hard Drive Not being seen by Time Machine hooked up to my iMac via firewire 800. My iMac is running latest updates etc. Have raised a support ticket and was given the following instructions by LaCie:
    Posted: 08 November 2007 @ 00:00
    Thank you for contacting LaCie Technical Support. Make sure the drive is mounting and you can assess files on it on your 10.5 system. If you can then you will need to reformat the drive to make it compatible with time machine.
    Warning! All data on the external drive will be destroyed in this process.
    Step 1: Run Applications > Utilities > Disk Utility
    Step 2: Click on the LaCie hard drive's 'physical' entry, usually the third entry in the list
    Step 3: Click on the Partition tab
    Step 4: Change 'Current Scheme' to '1 Partition'
    Step 5: Change the name of the drive back to what you would like it to be
    Step 6: The format needs to be Mac OS Extended, with or without journaling
    Step 7: Click on the Options... button
    Use "Apple Partition Map" partition scheme on a PowerPC-based Mac.
    Use "GUID" partition scheme on an Intel-based Mac.
    Step 8: Click on OK
    Step 9: Click on Apply
    Step 10: click on Erase at the bottom of the screen, then confirm the erase.
    The drive should start to be reformatted which should take only a few seconds and show up on the desktop with a new icon. Once it has you can then use it with time machine.
    I have done all of the above and it is still not being seen. Anyone had a similar issue or got the above to actually work?
    Thanks in advance!!!!

    Ryan,
    Check drive volume name and also the Computer name. Apple released a tech note recommending that both be limited to only the characters A-Za-z0-9 (no dashes, hyphens, or other special characters.
    If you can, send the Apple System Profiler report to me at the addres in my profile. Imay be able to see something there. I have helped another user with similar problems, but with a LaCie USB drive. He got things working by repeating the recommended steps, and double checking everything.
    As others have rported, this should work, so there may be something else preventing proper operation.
    If the drive is usable from Finder, but Time Machine cannot use it, there is something related in how Time Machine is viewing the drive.
    Mike

  • External Hard drive not backed up on Time Machine

    One of my Seagate external hard drives has failed. I thought that the Time Machine was backing up its contents onto my other external hard drive - I set it to back up everything including the external HD. However I've looked into the Time Machine & gone back to before the HD failed, & there is no sign of it. Surely its contents should have been saved on there even if it has now failed? I don't understand the Time Machine anyway; it seems to only show me certain parts of the computer contents; it's really hard to see all of what is on there.
    Second question; what is the best brand of external HD to buy? I thought Seagate was reliable but I no longer trust it after this failure. Someone on this forum recommended OWC Mercury ProElite series?

    Thanks all,
    This is helpful. I am 100% certain I set it to back up everything except the HD it is backing up onto - I remember specifically telling it to back up the other HD -  but strangely, when I open the TM window I cannot see anywhere to specify the folders etc to back up; please see screenshot. All it shows is that the TM back-up drive is excluded. I don't understand where all the preferences have gone? I got this window by clicking 'options'; the only other choice was 'select disk'.
    Anyway, if as you say they are not included even if you expressly tell it to back them up, maybe including them has no effect. I will try the shift-command-C thing & see if that helps.
    Thanks.

  • External hard drive not appearing when entering time machine.

    Why does my external hard drive back up on time machine ok, but when I enter time machine (and the external device isn't plugged in) i can't see it?
    It appears in time machine fine when the external drive is plugged in, but just not if it's been ejected or
    I want to have the ext drive backed up in case I lose it or it corrupts....and if that happens I won't be able to plug it in to see the drive in TM - does that make sense?
    I am running OSX 10.9.3 on a Mid 2010 Mac Book Pro. The external drive is a samsung and is formatted to Mac OS Extended (journaled). Time Machine is a standard Apple one and has been working fine for a couple of years

    Try holding down the Option Key when selecting the Time Machine menu, then select Brows Other Time Machine Disks. See if you can then browse the backup of that drive. The normal Time Machine display is kind of a “live” restore point thing, if that makes sense.
    I’m not sure if there is anything in Pondini’s FAQ, but you might peruse it and see if he discusses that issue: http://pondini.org/TM/FAQ.html

  • Working in adobe illustrator - computer crashed - will not soft boot or reset PRAM - should i reinstall from CD snow leopard 10.6.3? I have an extra hard drive in my MAC with time machine on it set to do auto back ups. How do i recover ?

    working in adobe illustrator - computer crashed - will not soft boot or reset PRAM - should i reinstall from CD snow leopard 10.6.3? I have an extra hard drive in my MAC with time machine on it set to do auto back ups. How do i recover ?

    Well first you have to figure out what is wrong with the machine and solve that problem first.
    Your post is very vague on what occured, and there are many types of "crashes" it really depends upon what see on the screen and what the hardware does, we can't see it to tell you, so you have to tell us.
    I suggest you run through these user tips and provide more information about your hardware.
    Disconnect the TimeMachine drive for now
    ..Step by Step to fix your Mac
    Help us to help you on these forums
    Create a data recovery/undelete external boot drive
    If this is going way over your head, there are local PC/Mac techs that will assist you for a fee, Apple only does hardware repairs and is advised to use them if you discover it is, especially if under warranty/AppleCare.
    Hard drive and RAM upgrades can be handled yourself or by a outside tech in many older models of Mac, but don't expect Apple to cover the new parts.
    Install/upgrade RAM or storage drive in Mac's

  • I am trying to get space on an external hard drive which has some old time machine back up files that I do not need but can not eliminate, even by going into the time machine, clicking on the backup file to be eliminated and using the drop down eliminate

    I am trying to get space on an external hard drive which has some old time machine back up files that I do not need but can not eliminate, even by going into the time machine, clicking on the backup file to be eliminated and using the drop down menu with the gear box symbol to eliminate

    I cannot find this 300GB "Backup" in the Finder, only in the Storage info when I check "About This Mac".
    You are probably using Time Machine to backup your MacBook Pro, right? Then the additional 300 GB could be local Time Machine snapshots.  Time Machine will write the hourly backups to the free space on your hard disk, if the backup drive is temporarily not connected. You do not see these local backups in the Finder, and MacOS will delete them, when you make a regular backup to Time Machine, or when you need the space for other data.
    See Pondini's page for more explanation:   What are Local Snapshots?   http://pondini.org/TM/FAQ.html
    I have restarted my computer, but the information remains the same. How do I reclaim the use of the 300GB? Why is it showing up as "Backups" when it used to indicate "Photos"? Are my photos safe on the external drive?
    You have tested the library on the external drive, and so your photos are save there.  
    The local TimeMachine snapshot probably now contains a backup of the moved library.  Try, if connecting your Time Machine drive will reduce the size of your local Time Machine snapshots.

  • On imac 10.6.8 using current version of Aperture.  How can I access the Aperture Library  on my external hard drive that I use with time machine for backup?  I can only access the application but not the library..

    On imac 10.6.8 using current version of Aperture.  How can I access the Aperture Library  on my external hard drive that I use with time machine for backup?  I can only access the application but not the library..

    Go into Time Machine (the program not the bundle on the extrnal disk) and using Time Machine's browser go to the Folder where the library lives. You could look in the library bundle in Time Machine but that won't really tell you much,
    If you want to make sure it truely has backed up your library you will need to restore it and open the restored library with Aperture.
    If all this still has you confused you need to read up on Time Machine in order to get a feel for how it works, for what it is doing and for how to restore files from it.

  • After install of Lion, secondary internal hard drive used for backup and time machine is not showing on the desktop.

    After an install of Lion, my secondary internal hard drive used for backup and time machine is not showing on the desktop. Cannot be located with Disk Utility either. Contains vital files! please help...

    I have a TB internal drive, but this is what it shows for memory slots:
    Memory Slots:
      ECC:    Enabled
    DIMM Riser B/DIMM 1:
      Size:    2 GB
      Type:    DDR2 FB-DIMM
      Speed:    800 MHz
      Status:    OK
      Manufacturer:    0x0000
      Part Number:    0x000000463732353642363145353830304600
      Serial Number:    0x00000000
    DIMM Riser B/DIMM 2:
      Size:    2 GB
      Type:    DDR2 FB-DIMM
      Speed:    800 MHz
      Status:    OK
      Manufacturer:    0x0000
      Part Number:    0x000000463732353642363145353830304600
      Serial Number:    0x00000000
    DIMM Riser A/DIMM 1:
      Size:    1 GB
      Type:    DDR2 FB-DIMM
      Speed:    800 MHz
      Status:    OK
      Manufacturer:    0x80AD
      Part Number:    0x48594D5035313241373243503844332D5335
      Serial Number:    0x42076007
    DIMM Riser A/DIMM 2:
      Size:    1 GB
      Type:    DDR2 FB-DIMM
      Speed:    800 MHz
      Status:    OK
      Manufacturer:    0x80AD
      Part Number:    0x48594D5035313241373243503844332D5335
      Serial Number:    0x4207631E
    DIMM Riser B/DIMM 3:
      Size:    Empty
      Type:    Empty
      Speed:    Empty
      Status:    Empty
      Manufacturer:    Empty
      Part Number:    Empty
      Serial Number:    Empty
    DIMM Riser B/DIMM 4:
      Size:    Empty
      Type:    Empty
      Speed:    Empty
      Status:    Empty
      Manufacturer:    Empty
      Part Number:    Empty
      Serial Number:    Empty
    DIMM Riser A/DIMM 3:
      Size:    Empty
      Type:    Empty
      Speed:    Empty
      Status:    Empty
      Manufacturer:    Empty
      Part Number:    Empty
      Serial Number:    Empty
    DIMM Riser A/DIMM 4:
      Size:    Empty
      Type:    Empty
      Speed:    Empty
      Status:    Empty
      Manufacturer:    Empty
      Part Number:    Empty
      Serial Number:    Empty

  • I just replaced my hard drive and restored everything from Time machine. However, I am unable to open iphoto and the following message appears Your photo library was not found. Do you want to find your iPhoto Library?

    I just replaced my hard drive and restored everything from Time machine. However, I am unable to open iphoto and the following message appears Your photo library was not found. Do you want to find your iPhoto Library?
    Where do I find this library?
    thanks
    Shak

    Twas quite a hassle if I am honest which was eventually resolved but I don't feel qualified to help anyone through the process as it required a trip to my local apple store and a genius bar appointment.
    Personally, I would do anything like moving pictures out of folders etc. Certainly not creating a new users. i don't think that is an elegant solution
    Try the following which MAY just about rescue the situation for you but if they don't work you may have to do something more drastic.
    (1) Holding down Cmd & Alt at the same time, start iPhoto by clicking on the iPhoto icon. From the resulting menu choose Rebuild photo library by selecting all available options given to you and then pressing REBUILD!
    If that doesn't work
    (2) Fire up Utilities. Go to migration assistant. Chose 'From another Time machine back-up'. Open the 'Users' option that comes up next and from there select Pictures, then uncheck everything else like Applications etc (you don't want to do a full migration of everything) and click go.
    If that doesn't work, take a deep breath and this step is rather complicated but it worked for me. First of all close iPhoto! Then go to new Finder window.
    From the Finder window choose Pictures, then iPhoto library, press CMD and the letter i. It brings up a new window. Go to Sharing & permissions. From there select the padlock to unlock settings. and then select User account, then press the 'cog' icon next to +/- abd choose Apply to enclosed items.
    This may take a while. Once completed, re-open iPhoto.
    And that should (I stress should) cure it.
    Good luck.

  • I am having sporadic issues after new hard drive install and recovery using Time Machine. The same sluggish response, start up screen pixelating...If I reinstall Lion will it wipe out other applications? My HD was formatted and partitioned correctly, I ha

    I am having sporadic issues after new hard drive install and recovery using Time Machine. The same sluggish response, start up screen pixelating...If I reinstall Lion will it wipe out other applications? My HD was formatted and partitioned correctly, I have a late 2009 iMac.

    Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
    This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

  • I need to erase my hard drive and start anew, will time Machine(external drive) and all the discs I got with my computer be enough to restart things

    I need to erase my hard drive and start anew, will time Machine(external drive) and all the discs I got with my computer be enough to restart things.  And secondly does RAM memory cards go bad.  Here's the info on my IMac:
    Model Name:          iMac
      Model Identifier:          iMac6,1
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2.16 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache:          4 MB
      Memory:          3 GB
      Bus Speed:          667 MHz
      Boot ROM Version:          IM61.0093.B07
      SMC Version (system):          1.10f2

    I need to erase my hard drive and start anew
    Why do you feel you need to do this? That is such a 'Windows thing' to do!
    And secondly does RAM memory cards go bad
    Very rarely, but nothing in life is guaranteed (except death and taxes)! If you purchased RAM from a reputable source like Crucial or OWC it will carry a lifetime warranty.

  • Why is my external hard drive showing up twice on Time Machine?

    This is the first time I am using Time Machine because somebody recently gave me an external hard drive.
    The external hard drive is appearing twice on Time Machine preferences. One of them is currently backing up and the other one says "Waiting to back up" but I don't want it to back up twice on the same disk.
    Here's a screenshot:
    Does anyone know why it is doing this?

    Triple-click anywhere in the line below to select it:
    tmutil destinationinfo
    Copy the selected text to the Clipboard (command-C).
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V).
    Post any lines of output that appear below what you entered — the text, please, not a screenshot.

  • Hard drive packed up, but had Time Machine backup. I installed new sad and upgraded to Mountain Lion., but I can't find iPhoto library and photos or iTunes songs? Is there an answer to this?  Graham

    Hard drive packed up, but had Time Machine backup. I installed new ssd and upgraded to Mountain Lion, but I can't find iPhoto library and photos or iTunes songs? Is there an answer to this?  A backup run did not install either photos or songs. Graham

    Thanks so much but none of that helped.  It was driving me crazy because it would back up another external drive.  I just changed the name of the drive from iPhoto/iTunes Library to Media Libraries and IT WORKED!! I guess for some reason it didn't like the drive being called iPhoto or iTunes ???? I don't understand but I have tried so many solutions and exchanging things out but the name change did it????!!!
    Thank you for your help and replying to this.  Guess I made my own issue!

  • I just replaced my hard drive and restored everything from Time machine. However, my itunes is empty.  No music, movies etc are there.  Please help thanks

    I just replaced my hard drive and restored everything from Time machine. However, my itunes is empty.  No music, movies etc are there.  Please help thanks

    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    Windows images, but you get the point. Depending on the age of your library the library file might not include the .itl extention. Make it match the file you are replacing.
    See MusicFolder Files Not Added and Super Remove Dead Tracks for tools to catch up with any changes since the backup file was created.
    tt2

  • I have an external hard drive set up as a Time Machine backup on my IMac. I want to add a second external hard drive and put my Aperture Photo Library on it. Is there a way to have the photos on this second hard drive automatically back up to the Time Mac

    I have an IMac with an external hard drive set up as  a Time Machine for automatic backups. I want to add a second external hard drive and load my Aperture Photo Library on to it so that the library can be shared by both me and my wife. Is there a way to automatically backup the photo library that will be on the second hard drive to the Time Machine hard drive?

    Open System Preference > Time Machine
    Click Options....
    Ckick on external disk in list and hit the - button below the list to remove from the Exclusion list
    Allan

  • HT201250 I have two external hard drives. One is my Time Machine backup drive.  The other I use for external storage of files (documents, photos, movies, etc).  Can I set Time Machine to backup BOTH my Mac hard drive and my other external hard drive?

    I have two external hard drives. One is my Time Machine backup drive.  The other I use for external storage of files (documents, photos, movies, etc).  Can I set Time Machine to backup BOTH my Mac hard drive and my other external hard drive?

    Yes you can make multiple backups on one hard drive, for example if you’ve 1TB hard drive installed in your PC and you’ve two Mac Machines with 500GB drive each then you just make two backup images with size of 500GB each.
    http://www.halfspot.com/use-your-pc-hard-drive-for-time-machine-backup/

Maybe you are looking for