Hard Drive not recognized in Windows Setup

Mobo: MSI PM8M2-V
CPU: Intel P4 64-Bit CPU
HDD: WD 1600 PATA Drive
OS: Windows XP 64-Bit
BIOS: W7071VMS V2.3 092605
I am building a computer for my brother and have hit a roadblock. The Windows XP setup will not recognize my PATA drive (the only drive in the system) by default. I have downloaded drivers from both the MSI and VIA websites as well as a third party website out of desparation but every 64-bit driver I can get my hands on for this machine will load however will not recognize the drive.
I need to know if I should cut my losses here or if there is a path to salvation as this 'couple hours' project is begining to take up a significant portion of my life. He had a version of windows on the machine prior to my meddling however I'm almost certain it was 32-bit. Truth be told the 32-bit version of Windows didn't recognize the drives either but I haven't tried toubleshooting that scenario.
Any assistance will be greatly appreciated. I simply cannot afford to spend more time working on this (2 1/2 weeks away from a bachelor's degree, yeah I'm pretty busy). Thank you.
-TomaCzar

Quote from: TomaCzar on 06-May-06, 11:02:03
-<*>- Text removed -<*>-
Because I am able to fully install Slackware on a second partition I am certain the BIOS sees the drive correctly . . .
-<*>- Text removed -<*>-
. . . I can start the 32-bit installation process
-<*>- Text removed -<*>-
-TomaCzar
If you can still boot into Slackware, then the BIOS still recognises the HDD. Do Slackware and the BIOS recognise that the HDD is 160Gb and not about think that it is about 20 to 30Gb ?
If you have access to a 32-bit copy of Windows, have you tried installing that to see if it works ? If it does, you have confirmed that the problem is with the 64-bit version of Windows (and your motherboard or HDD).
Personally, I wouldn't install the 64-bit version of Windows - it hasn't been around for 5 years yet !
Ahhh, brothers . . . I have one just like that, "Can you come round after work and get the viruses and malware off my PC please ? It should only take you about 5 minutes." Yeah, right !
Just a (further) thought, I think I had a similar problem some time ago. Windows 2K wouldn't recognise a HDD which I had previously partitioned with some version of Linux. It seemed as if Windows didn't like the partition table or something. I was convinced that the HDD was faulty . . . but it would still boot Linux. I eventually managed to get round the problem by doing a low-level format on the HDD and installing W2K before re-installing Linux. I now ALWAYS install Windows first, followed by Linux.
ps. Good luck with the Bachelors - not good timing.

Similar Messages

Hard drive not recognized during windows server 2008 setup

hard drive not recognized during windows server 2008 setup

Hi,
Whether the hard disk is recognized in BIOS?
Connect it to another computer to see if it could be recognzied incase the cause is the disk itself. Also please check if it is really a RAID instead of a single hard disk - a single disk should be recognized directly while RAID cannot be recognized until
a suitable driver is installed.
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Iomega External Hard Drive not recognized on windows 8.1

I wanted to share this with others that may have or do run into the same problem. I used the iomega external drive 1TB on an XP computer for a couple years, then when that computer went bad, hooked it up to a windows 8. This worked perfectly fine, but last week I did the upgrade to windows 8.1 and the drive was no longer able to be read. It showed in disk management as unallocated.
I found a suggestion on using File Scavenger software to recover the data. I did have to pay for that software, but it not only found and recovered all my files, but also found missing daily backups that I thought were failing. Those must have been unreadable because my xp hard drive was starting to go bad.
After recovering and saving all my files to the computer (which did take a long time - 13 hours) I was then able to reformat the external drive, copy my files back to it, and continue to use it as always.
Hope this helps someone else who may be devasted on losing important or precious files.

The hard drive will not show up on the sidebar or desktop unless Finder preferences are set to do that:
In Finder's General preference section, make sure "External disks" is checked in the list of things to show on the desktop if you want to see them there.
Likewise, in Finder's Sidebar preference section, make sure "External disks" is checked in the "DEVICES" section to see them automatically appear on the sidebar.
But you don't need to do either for the MBP to recognize the drive, or to get files from its Time Machine backup set. To do that, you should use the Time Machine "Star Wars" interface. Pondini's FAQ's (already mentioned) tell you how to do that. Tip 17 is particularly relevant.

Advanced Format Hard Drive not recognized by HP DV6000 Controller

Hello,
I have an HP DV 6000 laptop (6276 I think, I'm at work can't check) that came preinstalled with a Western Digital 160gb 1.5gb/s 5400 RPM drive (Vista) that failed a couple of weeks ago. So i bought a Western Digital 750 GB WD Black SATA III 7200 RPM 16 MB drive to replace it. I read about people having some problems with Advanced Drive Format hard drives not being recognized by their controller, but also read that depending on the controller and specific Dv6000 model laptop they had-one wouldn't run into problems.
Well sure enough, when attempting to install Windows 7 I received the error that the hard drive was not detected. After researching online I came across an article on WD's site that noted
"Our SATA II hard drives use autospeed negotiation. This enables our SATA II drives to automatically detect the motherboard data transfer rate, making it backward compatible with SATA I data transfer rates. However, some older SATA I controllers are unable to support autospeed negotiation and cannot recognize the drive. This “drive not detected” condition occurs when a chipset is incapable of correctly negotiating the data transfer speed with a SATA II hard drive."
my drive is a SATA ||| but I'm pretty sure it's the same problem. The site goes on to say a fix would be to "purchase and install a third party PCI or PCI-Express Second Generation Serial ATA controller card for your Serial ATA hard drive(s)."
My question(s) are.
1)Is the problem that I am trying to install a Sata ||| hard drive on a laptop with a controller that will only recognize SATA | hard drive?
2) Or is the problem that the hard drive is an Advanced Drive Formatted hard drive and I need to buy a hard drive with out that specification?
3) Or Should I buy a SATA controller card as WD suggests on their website and if so will this definitely allow my laptop's controller to recognize the new hard drive and proceed with the installation?
4)Or Should I just return the hard drive and buy a SATA | non Advanced Drive Format hard drive? (question 2 basically)
Thanks for your help!

Hi @jasmine00
Welcome to the HP Support Forums.
I certainly understand your issue with the drive upgrade. Unfortunately it is a bit of the nature of notebooks, the sacrifice of a large amount of upgradeability, in exchange for compactness and portability. Whenever a new technology comes out, older notebooks are never really going to be easy to upgrade, it at all. Normally the unit as a whole is tested with a set list of hardware, and only those items are supported.
That being said there is this document that could be helpful with your problem.
Preparing Advanced Format hard drives for Microsoft Windows installations on HP Business Notebook PC...
And for your reference:
HP Pavilion dv6000 Notebook PC Maintenance and Service Guide
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Toshiba External Hard Drive not recognized by computer. Please help!

I was wondering if anyone could help me. I have an external hard drive and it will not show up in "My computer" when I plug it in. I have tried other USB drives and other computers. I am starting to think it is a hardware issue but I don't want to lose hope. The blue light is coming on when you plug it in but it doesn't blink and there is no noise whatsoever. Is there anything I can do to fix this issue so that I can recover the information on it? Thanks in advance for any help. It is greatly appreciated.
Additional information: I'm not sure how old this thing is but the model number is HDDR160E03X.

Same problem: I can't see my Toshiba PH3100U-EXB (Gen 2) external hard drive when I plug it in. After awhile I get this error message (see attachment): USB Device Not Recognized. One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it. FOr assistance in solving this problem, click this message."
When I click it, I get a list of USB ports and devices, with Unknown Device in bold face. No real information there.
Yes, I ran Disk Management and the Toshiba did not show up when I plugged it in and hit Refresh.
Does it make a difference that the last time I used the external hard drive, we were in Windows XP and now we're in Windows 7?
Please help! It's not just the backing up I'm worried about...it's being able to retrieve files later!
Thanks!
Attachments:
USB-NotRecognized.jpg ‏28 KB

MSI UBO-30 External Slim Bluray Drive not recognized under Windows 8.1

Hi, does anyone here have MSI UBO-30? It is an external bluray drive from MSI. For some reason the drive is not recognized under windows 8.1 64 bit (it just says USB device not recognized). But works fine if plugged into Windows 7 machine. Anyone encounter the same issue?

Try upgrading your usb 3.0 drivers on your system. That worked with My GS70 Stealth Pro...

Hard drive not recognized when trying to install windows

Compaq nx6320 laptop does not see the hard drive. HD is good outside the laptop. The HD is seen by CDROM disk utilities.

Hi,
Please read the following topic:
http://seagate.custkb.com/seagate/crm/selfservice/search.jsp?DocId=168595
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Hard drive not recognized by M35X-S329 laptop

My laptop got the Windows Blue Screen and I shut it down. Upon restart, I get a message "PXE-E61" Media Test Failure, check cable. When I enter the BIOS, it does not show a hard drive. I've taken out the hard drive and put it in a USB enclosure case to see if it would read the drive. At this point it doesn't. Is there any hard drive test I can run from startup on the laptop to see if it is indeed a hard drive failure?

LH wrote:
My laptop got the Windows Blue Screen and I shut it down. Upon restart, I get a message "PXE-E61" Media Test Failure, check cable. When I enter the BIOS, it does not show a hard drive. I've taken out the hard drive and put it in a USB enclosure case to see if it would read the drive. At this point it doesn't. Is there any hard drive test I can run from startup on the laptop to see if it is indeed a hard drive failure?
If the BIOS can't see it, there's really no way to test something that isn't 'there'.
The fact that you can't get it to be recognized in an external case just confirms that it's a dead drive.

DVD/CD RW drive not recognized by Windows 7

Since buying this laptop (HP Pavillion DV7T) I have had trouble with the DVD/CDRW drive not being recognized after a shutdown. This is an intermittant problem with no traceable cause. To fix this issue I have tried the following: Assigned the DVD/CDRW with the letter Y in case there was a drive conflict causing it; used the troubleshooter offered by Windows 7; uninstalled and reinstalled the drivers; checked for updated firmware.
If I run a scan for hardware changes, the drive shows up again, but only until the problem reoccurs. I am seeing this problem about 4 times a week. This issue will occur on about every other hard reboot, again, no real pattern that I can identify.
I have made a change to the system. I had to disable all hybernate options due to the "power state failure" bsod that I was seeing. I don't believe this change would cause any issues with the optical drive.

Have you tried MS Fix-It?
http://fixitcenter.support.microsoft.com/Portal/WhyFixIt#Easy
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

New x1 carbon: portable hard drive not recognized

Hi everyone,
I found this issue really annoying, let me show you the detail
1.Both usb ports work well after I reset my computer.(USB flash drive or USB portable hard drive can be used at anytime)
2.After I installed all the drivers provided on the website, this issue came out
3.If you plug in the USB flash drive, both ports work well at anytime
4.If you plug in the USB hard drive, most of the time system cannot recognize it
5.If you plug in the USB hard drive right after restart, the system will recognize it, but after a while, it can't
6.One interesting fact: if you plug in a USB falsh drive first, then unplug and plug in the hard drive, the hard drive then can be recognized...And the other unused USB port will not recognize anything...
7.When the system cannot recognize my USB hard drive, you can hear the HDD is working but you cannot find this device in device manager, however, when you unplug it, there will be a warning tone just like you unplug any other devices.
8.I have to restart Windows and plug the hard drive immediately to use it, or after few minutes Windows will not recognize it unless you restart again, sometimes I have to restart more the 3 times.
P.S. Both the USB ports are fine, both my flash drive and hard drive are fine, this issue happen right after I installed all the drivers. The hard drive is 2.5'' so do not need extra power. My BIOS is the latest. And I trived set the "USB 3.0 only" mode in the BIOS, doesn't work
Thank you for your help!
Moderator comment: Please refrain from bumping your thread(s) / post(s) more frequently than 3 days. Doing so, unfairly, pushes other members' threads downwards. Bumping post(s) removed.

are your portable hdd connected to two usb? one for data and one for power?
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

New internal hard drive not recognized at all!

Hello everybody!
I really need your help. I tried to upgrade my internal 120gb drive to a Western Digital wd2500bevs. But when I start my Macbook with the Leopard DVD neither the System Profiler nor the Disk Utilities Program recognize the drive for a possible installation. When I reinstall the old drive everything is back to normal and works perfectly.
This is what I already tried to fix the problem:
I took the drive into an external casing => it was recognized immediately
I then formatted it => no change after installing it into the Macbook again.
I cloned my system with CCC on the WD and then installed it => no system found.
I have another disk of this kind but the same problem and another 160gb Toshiba disk which is not recognized as well.
Please help me! I couldn't find help in German discussions yet so I hope anyone of you guys can help me.

You say the drive is "recognized" but your original post stated it was not present in Disk Utility. I'm puzzled. Have you attempted to partition and format the drive?
Extended Hard Drive Preparation
1. Boot from your OS X Installer Disk. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.

USB external hard drive not recognized by computer - using WRTSL54GS

Hi, I have my router (WRTSL54GS) set up and seems to be working ok, but the computer does not recognize it in my network. It only recognizes it as a wireless connection. Also, the USB hard drive I have attached to the router is not recognized anywhere on my computer. What am I doing wrong? Any help would be appreciated!

hi - thanks for responding! I have comcast and have their modem. I hooked up the router with my laptop and went through the setup fine. Everything with that works ok. The USB drive is recognized on the web based utility program that you use to set up the router. However, no where on my computer can I find the USB drive or where to even set up that driver. The manual says that my router should be listed as a another computer in my network neighborhood and that I should be able to find the hard drive through that. It is not. Its only listed in my wireless connections. I talked to a rep at linksys for awhile. In the end, they just suggested unplugging it and plugging it back in......that didn't work! Does that help?

Memory modules and hard drive not recognized

I removed and reinserted the factory installed Satellite L505D-LS5007 laptop hard drive and memory modules just as practice for installing a hard drive upgrade and an 8GB memory upgrade. The problem is obviously with the memory and not with the hard drive.
After the first practice try, one memory module was recognized. Also for a few seconds after the first practice try, I ran the PC with the battery installed, but no memory installed. I did not look in the User's Guide first to see that I should have removed the battery before removing the memory.
Now the System Indicator Lights for the HDD Activity and Memory Card Reader do not light up. The PC turns on and the display is solid black with no messages.
Before buying new memory modules, what possible ways might there be to get the PC to recognize the factory installed memory modules and hard drive again?
Solved!
Go to Solution.

When troubleshooting, I always change one variable at a time. I would hate to miss a solution by being in a hurry. In this case, you may have damaged either the RAM or the RAM slot. I would stick with the Toshiba specifications for the RAM, making sure it is the correct size, speed and type recommended. I also recommend that when you replace the RAM that both modules be from the same manufacturer, size, and specification. Try one RAM module in one slot and then the other. And then try both RAM modules in both slots. After the testing you should be able to figure if this is a RAM problem or a RAM slot problem.
In the case of hard drives, the real test is whether or not the Bios sees the hard drive. If the Bios doesn't see the hard drive, it's not going to work. The Bios should see the hard drive whether or not the hard drive is partitioned, formatted or has data on it. My experience has been that many Toshiba laptops will work fine with larger capacity hard drives provided they are the same speed in RPMs, have the same interfacing connection and physically the same size.
Again, prior to doing any work on your computer, make sure that both the AC power has been disconnected and the battery has been removed. Be careful out there. A blown repair job by a non-Toshiba tech is NOT covered under warranty.

Thunderbolt partitioned and formatted hard drive not recognized on USB2/3

I have a MBA (mid 2012) and recently purchased a Seagate Desktop Thunderbolt Adapter (STAE129), a Seagate Backup Plus 4TB USB 3.0 external drive (STCA4000100), and Apple Thunderbolt cable. The 4TB hard drive can be separated from the USB 3.0 adapter and the drive placed on the Thunderbolt adapter. I created two partitions (3TB and 1 TB) on the 4TB drive while it was mounted on the Thunderbolt adapter and formatted them Mac OS Extended (Journaled) using partition map scheme GPT. Everything works as expected, the drive hits r/w speeds in the 180 MB/s range (using Blackmagic Disk Speed Test), and no issues at all transferring data to the 3TB partition and using the 1TB partition for TimeMachine.
However, if I disconnect the hard drive from the Thunderbolt adapter and place it on the USB 3.0 adapter and connect it to my MBA, Mountain Lion says "The disk you inserted was not readable by this computer and gives me the options to Initialize, Ignore, or Eject. Going into Disk Utility app, the drive shows up without the partitions I created when the same drive was mounted to the Thunderbolt adapter (just shows disk1s1). In fact, the drive label (Disk Description) is different too and the Partition Map Scheme now shows MBR!
To try work-arounds, I went ahead and repeated the partitioning and formatting steps with the drive attached via USB 3.0 and all works fine until I put the drive back on the Thunderbolt adapter where once again OSX reports that the disk is not readable. I've even tried a single partition with no luck. In short, the drive partitioned and formatted on Thunderbolt is unrecognized under USB and vice versa.
Shouldn't the disk preparation and data be consistent across these different interfaces? I would think so. My biggest concern is that if I had a failure in the Thunderbolt setup (assuming the drive itself does not fail), then I can't access my data. This is not a very comfortable situation.
I'm assuming I've overlooked a very basic detail. Appreciate any steer to solve this problem.
Thanks,
Rob

Thanks for that, I recently ran into the same problem. I even chatted with Seagate tech support and they didn't know the answer.
My situation is a bit different from you. I bought the 3 TB Thunderbolt version of the drive directly and then purchased a USB 3 adaptor seperately. You see, I still own a 3 year old Macbook Pro that doesn't come with a Thunderbolt port. I was looking to upgade to a MacBook Air later. I thought that I might as well buy the TB version now.
In anycase, my old MacBook Pro won't see the drive when I use the USB3 adaptor. I get the same exact error message as you did. I can't really test it on Thunderbolt since I don't have one. I'm going to go install the Thunderbolt drivers now and hopefully, it will recognize the drive afterwards. I'll let you know what happens.
BTW, I was thinking of reformatting the drive with NTFS so that I can use the drive on PCs. My mac has the NTFS drivers loaded so it's no problem. I hope this won't screw up the Thunderbolt connection later when I do get the Macbook Air?

Yoga 2 Pro Hard Drive not recognized

I got my Yoga 2 Pro as a Christmas present and have had issues with the computer recognizing the hard drive every time it boots up or enters sleep mode (and this is after the 1 initial boot up where I didn't have to enter the BIOS). Not sure if this is a bios or hardware issue, but I can get it booted after entering the BIOS, changing various (seemingly random) settings (UFEI/Legacy support usually) to get the computer to even recognize that it has a hard drive installed at all. Once it does boot, as long as it doesnt sleep or shut down, it'll continue to work, leading me to think this is some sort of BIOS issue. Has anyone been able to resolve this issue without the hassle of returning it to Lenovo an getting a whole new one? The computer is great, when it boots up, but this is extremely disappointing/frustrating to have to enter the BIOS every single time I want to turn the computer on to use it!

@Lenovo Support - Please respond to this issue.
SO MANY PEOPLE HAVE FACED THIS ISSUE & ARE STILL FACING - BUT NO RESPONSE FROM LENOVO SUPPORT...... !!!!

Hard Drive not recognized in Windows Setup

Similar Messages

Maybe you are looking for